Skip to contentSkip to conversation

usb: dwc3: fix backwards compat with rockchip devices

PATCH In review Peter Geis 4 participants 4 messages Apr 9, 2022 – Apr 11, 2022

Subsystems (3)
lore
Share & tools
lore

Peter Geis

author
#0 lore raw

PATCH 1/1 usb: dwc3: fix backwards compat with rockchip devices

Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from the clk_bulk api to individual clocks, following the snps,dwc3.yaml dt-binding for clock names.
Unfortunately the rk3328 (and upcoming rk356x support) use the rockchip,dwc3.yaml which has different clock names, which are common on devices using the glue layer.
The rk3328 does not use a glue layer, but attaches directly to the dwc3 core driver.
The offending patch series failed to account for this, thus dwc3 was broken on rk3328.

To retain backwards compatibility with rk3328 device trees we must also check for the alternate clock names.

Fixes 33fb697ec7e5 ("usb: dwc3: Get clocks individually")

---

This patch is standalone to fix the backwards compatibility, and is necessary no matter if we decide to retain the clock names in rockchip,dwc3.yaml as is or align with snps,dwc3.yaml.

 drivers/usb/dwc3/core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/usb/dwc3/core.c +23 -0
index 1170b800acdc..5bfd3e88af35 100644
@@ -1690,21 +1690,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);
Signature · 1 line
2.25.1
maintainer Reviewed-by on v1 1/1
#1 lore raw

Am Samstag, 9. April 2022, 17:21:15 CEST schrieb Peter Geis:

Quoted 11 lines

Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from the clk_bulk api to individual clocks, following the snps,dwc3.yaml dt-binding for clock names.
Unfortunately the rk3328 (and upcoming rk356x support) use the rockchip,dwc3.yaml which has different clock names, which are common on devices using the glue layer.
The rk3328 does not use a glue layer, but attaches directly to the dwc3 core driver.
The offending patch series failed to account for this, thus dwc3 was broken on rk3328.

Quoted 7 lines

To retain backwards compatibility with rk3328 device trees we must also check for the alternate clock names.

Fixes 33fb697ec7e5 ("usb: dwc3: Get clocks individually")
Quoted 49 lines

---

This patch is standalone to fix the backwards compatibility, and is necessary no matter if we decide to retain the clock names in rockchip,dwc3.yaml as is or align with snps,dwc3.yaml.

 drivers/usb/dwc3/core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/usb/dwc3/core.c +16 -0
index 1170b800acdc..5bfd3e88af35 100644
@@ -1690,21 +1690,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");

drivers/usb/dwc3/core.c static int dwc3_probe(struct platform_device *pdev) · line 1733

Quoted 10 lines
drivers/usb/dwc3/core.c +7 -0
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#2 lore raw

Tested on rk3568 Bpi-R2 Pro V1.0 with RK356x USB-Support [1] and BPI-R2-Pro USB Support [2]

regards Frank

[1] https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
[2] https://patchwork.kernel.org/project/linux-rockchip/list/?series=630686

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Acked-by on v1 1/1
#3 lore raw
In reply to Peter Geis
Quoted 67 lines · Peter Geis

Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from the clk_bulk api to individual clocks, following the snps,dwc3.yaml dt-binding for clock names.
Unfortunately the rk3328 (and upcoming rk356x support) use the rockchip,dwc3.yaml which has different clock names, which are common on devices using the glue layer.
The rk3328 does not use a glue layer, but attaches directly to the dwc3 core driver.
The offending patch series failed to account for this, thus dwc3 was broken on rk3328.

To retain backwards compatibility with rk3328 device trees we must also check for the alternate clock names.

Fixes 33fb697ec7e5 ("usb: dwc3: Get clocks individually")

---

This patch is standalone to fix the backwards compatibility, and is necessary no matter if we decide to retain the clock names in rockchip,dwc3.yaml as is or align with snps,dwc3.yaml.

 drivers/usb/dwc3/core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/usb/dwc3/core.c +16 -0
index 1170b800acdc..5bfd3e88af35 100644
@@ -1690,21 +1690,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");

drivers/usb/dwc3/core.c static int dwc3_probe(struct platform_device *pdev) · line 1733

Quoted 10 lines
drivers/usb/dwc3/core.c +7 -0
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip