hwmon/tmp401: add support of three advanced features
Subsystems (2)
cover hwmon/tmp401: add support of three advanced features
According the their datasheets:
- TMP401, TMP411 and TMP43x support extended temperature range;
- TMP411 and TMP43x support n-factor correction;
- TMP43x support beta compensation.
In order to make it possible for users to enable these features and set up them based on their needs, this patch series adds the following devicetree bindings:
- ti,extended-range-enable;
- ti,n-factor;
- ti,beta-compensation.
In the meanwhile, tmp401 driver reads them and configures the coressponding registers accordingly.
Camel Guo (2):
dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x
hwmon: (tmp401) Add support of three advanced features
.../devicetree/bindings/hwmon/ti,tmp401.yaml | 111 ++++++++++++++++++ MAINTAINERS | 1 + drivers/hwmon/tmp401.c | 43 ++++++- 3 files changed, 154 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
base-commit: ce522ba9ef7e2d9fb22a39eb3371c0c64e2a433e
Signature · 1 line
2.30.2
PATCH 1/2 dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x
From: Camel Guo <[email protected]>
Document the TMP401, TMP411 and TMP43x device devicetree bindings
--- .../devicetree/bindings/hwmon/ti,tmp401.yaml | 111 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 112 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml new file +111 -0
@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP401, TPM411 and TMP43x temperature sensor + +maintainers: + - Guenter Roeck <[email protected]> + +description: | + ±1°C Remote and Local temperature sensor + + Datasheets: + https://www.ti.com/lit/ds/symlink/tmp401.pdf + https://www.ti.com/lit/ds/symlink/tmp411.pdf + https://www.ti.com/lit/ds/symlink/tmp431.pdf + https://www.ti.com/lit/ds/symlink/tmp435.pdf + +properties: + compatible: + enum: + - ti,tmp401 + - ti,tmp411 + - ti,tmp431 + - ti,tmp432 + - ti,tmp435 + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ti,extended-range-enable: + description: | + When set, this sensor measures over extended temperature range. + type: boolean + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the n-factor correction + register. + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 255 + + ti,beta-compensation: + description: | + The value to be programmed in the beta range register. + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 15 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + then: + properties: + ti,n-factor: false + + - if: + properties: + compatible: + contains: + enum: + - ti,tmp401 + - ti,tmp411 + then: + properties: + ti,beta-compensation: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp431"; + reg = <0x4c>; + ti,extended-range-enable; + ti,n-factor = <0x3b>; + ti,beta-compensation = <0x7>; + }; + };
MAINTAINERS +1 -0
@@ -19838,6 +19838,7 @@ TMP401 HARDWARE MONITOR DRIVER M: Guenter Roeck <[email protected]> L: [email protected] S: Maintained +F: Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml F: Documentation/hwmon/tmp401.rst F: drivers/hwmon/tmp401.c
Signature · 1 line
2.30.2
PATCH 2/2 hwmon: (tmp401) Add support of three advanced features
In reply to Camel Guotmp401 driver supports TMP401, TMP411 and TMP43X temperature sensors. According to their datasheet:
- all of them support extended temperature range feature;
- TMP411 and TPM43X support n-factor correction feature;
- TMP43X support beta compensation feature.
In order to support setting them during bootup, this commit reads ti,extended-range-enable, ti,n-factor and ti,beta-compensation and set the corresponding registers during probing.
--- drivers/hwmon/tmp401.c | 43 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
drivers/hwmon/tmp401.c +42 -1
@@ -41,6 +41,8 @@ enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };#define TMP401_STATUS 0x02#define TMP401_CONFIG 0x03#define TMP401_CONVERSION_RATE 0x04 +#define TMP4XX_N_FACTOR_REG 0x18 +#define TMP43X_BETA_RANGE 0x25#define TMP401_TEMP_CRIT_HYST 0x21#define TMP401_MANUFACTURER_ID_REG 0xFE#define TMP401_DEVICE_ID_REG 0xFF
@@ -543,6 +545,7 @@ static int tmp401_init_client(struct tmp401_data *data)struct regmap *regmap = data->regmap;u32 config, config_orig;int ret; +u32 val =0 ;/* Set conversion rate to 2 Hz */ ret =regmap_write (regmap,TMP401_CONVERSION_RATE ,5 );
@@ -557,10 +560,48 @@ static int tmp401_init_client(struct tmp401_data *data) config_orig = config; config &= ~TMP401_CONFIG_SHUTDOWN ; +if (of_property_read_bool (data->client->dev.of_node,"ti,extended-range-enable" )) { +/* Enable measurement over extended temperature range */ + config |=TMP401_CONFIG_RANGE ; + } + data->extended_range = !!(config &TMP401_CONFIG_RANGE ); -if (config != config_orig) +if (config != config_orig) { ret =regmap_write (regmap,TMP401_CONFIG , config); +if (ret <0 ) +return ret; + } + + ret =of_property_read_u32 (data->client->dev.of_node,"ti,n-factor" , &val); +if (!ret) { +if (data->kind == tmp401) { +dev_err (&data->client->dev,"ti,tmp401 does not support n-factor correction\n" ); +return -EINVAL ; + } +if (val >255 ) { +dev_err (&data->client->dev,"n-factor is invalid (%u)\n" , val); +return -EINVAL ; + } + ret =regmap_write (regmap,TMP4XX_N_FACTOR_REG , val); +if (ret <0 ) +return ret; + } + + ret =of_property_read_u32 (data->client->dev.of_node,"ti,beta-compensation" , &val); +if (!ret) { +if (data->kind == tmp401 || data->kind == tmp411) { +dev_err (&data->client->dev,"ti,tmp401 or ti,tmp411 does not support beta compensation\n" ); +return -EINVAL ; + } +if (val >15 ) { +dev_err (&data->client->dev,"beta-compensation is invalid (%u)\n" , val); +return -EINVAL ; + } + ret =regmap_write (regmap,TMP43X_BETA_RANGE , val); +if (ret <0 ) +return ret; + }return ret; }
Signature · 1 line
2.30.2
Quoted 21 lines · Camel Guo
According the their datasheets:
- TMP401, TMP411 and TMP43x support extended temperature range;
- TMP411 and TMP43x support n-factor correction;
- TMP43x support beta compensation.In order to make it possible for users to enable these features and set up them based on their needs, this patch series adds the following devicetree bindings:
- ti,extended-range-enable;
- ti,n-factor;
- ti,beta-compensation.
In the meanwhile, tmp401 driver reads them and configures the coressponding registers accordingly.Camel Guo (2):
dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x
hwmon: (tmp401) Add support of three advanced features
Quoted 11 lines
.../devicetree/bindings/hwmon/ti,tmp401.yaml | 111 ++++++++++++++++++ MAINTAINERS | 1 + drivers/hwmon/tmp401.c | 43 ++++++- 3 files changed, 154 insertions(+), 1 deletion(-)create mode 100644
Documentation/devicetree/bindings/hwmon/ti,tmp401.yamlbase-commit:
ce522ba9ef7e2d9fb22a39eb3371c0c64e2a433eSignature · 1 line
2.30.2
Incorrect email address in --to. Please ignore this one.