Skip to contentSkip to conversation

mmc: fsl_esdhc_imx: Add i.MX8MP compatible string

PATCH In review Marek Vasut 3 participants 32 messages Apr 11, 2022 – Apr 18, 2022

Subsystems (15)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/23 mmc: fsl_esdhc_imx: Add i.MX8MP compatible string

Add compatible string for i.MX8MP, which permits i.MX8MP to use HS400ES mode, just like all the other i.MX8M.

Cc Fabio Estevam <[email protected]>
Cc Haibo Chen <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add RB from Peng

---
 drivers/mmc/fsl_esdhc_imx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mmc/fsl_esdhc_imx.c +1 -0
index 02208a5ade4..893d7e241f2 100644
@@ -1640,6 +1640,7 @@ static const struct udevice_id fsl_esdhc_ids[] = {
 	{ .compatible = "fsl,imx8qm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
 	{ .compatible = "fsl,imx8mm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
 	{ .compatible = "fsl,imx8mn-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
+	{ .compatible = "fsl,imx8mp-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
 	{ .compatible = "fsl,imx8mq-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
 	{ .compatible = "fsl,imxrt-usdhc", },
 	{ .compatible = "fsl,esdhc", },
Signature · 1 line
2.35.1
#1 lore raw

PATCH v2 2/23 ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string

The correct compatible string for i.MX8MP variant of DWC EQoS MAC is "nxp,imx8mp-dwmac-eqos", use it. Drop the two current users of the current wrong compatible string to avoid breaking them.

---
V2: Add RB by Fabio, Ramon and TB by Marcel

---
 arch/arm/dts/imx8mp-evk-u-boot.dtsi    | 1 -
 arch/arm/dts/imx8mp-verdin-u-boot.dtsi | 1 -
 drivers/net/dwc_eth_qos.c              | 2 +-
 3 files changed, 1 insertion(+), 3 deletions(-)
arch/arm/dts/imx8mp-evk-u-boot.dtsi +0 -1
index ab849ebaaca..7c3789273da 100644
@@ -112,7 +112,6 @@
 };
 
 &eqos {
-	compatible = "fsl,imx-eqos";
 	/delete-property/ assigned-clocks;
 	/delete-property/ assigned-clock-parents;
 	/delete-property/ assigned-clock-rates;
arch/arm/dts/imx8mp-verdin-u-boot.dtsi +0 -1
index a57ad45ed63..26140a79ebe 100644
@@ -30,7 +30,6 @@
 };
 
 &eqos {
-	compatible = "fsl,imx-eqos";
 	/delete-property/ assigned-clocks;
 	/delete-property/ assigned-clock-parents;
 	/delete-property/ assigned-clock-rates;
drivers/net/dwc_eth_qos.c +1 -1
index 22dad5b2030..ea0c2cfa5b2 100644
@@ -2032,7 +2032,7 @@ static const struct udevice_id eqos_ids[] = {
 #endif
 #if IS_ENABLED(CONFIG_DWC_ETH_QOS_IMX)
 	{
-		.compatible = "fsl,imx-eqos",
+		.compatible = "nxp,imx8mp-dwmac-eqos",
 		.data = (ulong)&eqos_imx_config
 	},
 #endif
Signature · 1 line
2.35.1
#2 lore raw

PATCH v2 3/23 ARM: imx: imx8m: Add 933 MHz PLL settings

In reply to Marek Vasut

Add settings for operating PLL at 933 MHz. This setting is useful in case the LPDDR4 DRAM should operate at 1866 MHz or 3733 MT/s.

---
V2: Add RB by Fabio

---
 arch/arm/mach-imx/imx8m/clock_imx8mm.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-imx/imx8m/clock_imx8mm.c +1 -0
index 76132defc21..4db55f86081 100644
@@ -48,6 +48,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 #ifdef CONFIG_SPL_BUILD
 static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = {
 	PLL_1443X_RATE(1000000000U, 250, 3, 1, 0),
+	PLL_1443X_RATE(933000000U, 311, 4, 1, 0),
 	PLL_1443X_RATE(800000000U, 300, 9, 0, 0),
 	PLL_1443X_RATE(750000000U, 250, 8, 0, 0),
 	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
Signature · 1 line
2.35.1
#3 lore raw

PATCH v2 3/23 ARM: imx: imx8m: Add 933 MHz PLL settings

Quoted 7 lines

Add settings for operating PLL at 933 MHz. This setting is useful in case the LPDDR4 DRAM should operate at 1866 MHz or 3733 MT/s.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#4 lore raw

PATCH v2 4/23 imx8m: ddrphy_utils: Add 3732 MT/s mode

In reply to Marek Vasut

Add entry for 3732 MT/s mode of operation of the LPDDR4, in which case the DDR PLL has to be configured in 933 MHz mode.

---
V2: Add RB by Fabio

---
 drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/ddr/imx/imx8m/ddrphy_utils.c +4 -0
index 0f8baefb1f8..a54449e5f14 100644
@@ -117,6 +117,10 @@ void ddrphy_init_set_dfi_clk(unsigned int drate)
 		dram_pll_init(MHZ(1000));
 		dram_disable_bypass();
 		break;
+	case 3732:
+		dram_pll_init(MHZ(933));
+		dram_disable_bypass();
+		break;
 	case 3200:
 		dram_pll_init(MHZ(800));
 		dram_disable_bypass();
Signature · 1 line
2.35.1
#5 lore raw

PATCH v2 4/23 imx8m: ddrphy_utils: Add 3732 MT/s mode

Quoted 7 lines

Add entry for 3732 MT/s mode of operation of the LPDDR4, in which case the DDR PLL has to be configured in 933 MHz mode.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#6 lore raw

PATCH v2 5/23 pmic: pca9450: Add PCA9450C compatible string

In reply to Marek Vasut

Add DT compatible string for PCA9450C PMIC. This is a variant of the PCA9450 PMIC with 6 A dual-phase buck regulator and 3 A buck regulator, and is software-wise compatible with the PCA9450B. This variant of the PCA9450 is designed for use as companion PMIC for i.MX8MP.

---
V2: Add RB by Fabio and Jaehoon

---
 drivers/power/pmic/pca9450.c | 1 +
 1 file changed, 1 insertion(+)
drivers/power/pmic/pca9450.c +1 -0
index a886647f193..2394b196c56 100644
@@ -83,6 +83,7 @@ static struct dm_pmic_ops pca9450_ops = {
 static const struct udevice_id pca9450_ids[] = {
 	{ .compatible = "nxp,pca9450a", .data = 0x25, },
 	{ .compatible = "nxp,pca9450b", .data = 0x25, },
+	{ .compatible = "nxp,pca9450c", .data = 0x25, },
 	{ }
 };
 
Signature · 1 line
2.35.1
#7 lore raw

PATCH v2 5/23 pmic: pca9450: Add PCA9450C compatible string

Quoted 10 lines

Add DT compatible string for PCA9450C PMIC. This is a variant of the PCA9450 PMIC with 6 A dual-phase buck regulator and 3 A buck regulator, and is software-wise compatible with the PCA9450B. This variant of the PCA9450 is designed for use as companion PMIC for i.MX8MP.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#8 lore raw

PATCH v2 6/23 pmic: pca9450: Add upstream regulators subnode match

In reply to Marek Vasut

The upstream DT regulators node subnodes are named BUCKn and LDOn, the downstream DT regulators node subnodes are named buckn and ldon, add the upstream match.

---
V2: Add RB by Fabio

---
 drivers/power/pmic/pca9450.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/power/pmic/pca9450.c +2 -0
index 2394b196c56..26c876c9c45 100644
@@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;
 static const struct pmic_child_info pmic_children_info[] = {
 	/* buck */
 	{ .prefix = "b", .driver = PCA9450_REGULATOR_DRIVER},
+	{ .prefix = "B", .driver = PCA9450_REGULATOR_DRIVER},
 	/* ldo */
 	{ .prefix = "l", .driver = PCA9450_REGULATOR_DRIVER},
+	{ .prefix = "L", .driver = PCA9450_REGULATOR_DRIVER},
 	{ },
 };
 
Signature · 1 line
2.35.1
Reviewed-by on v2 6/23
#9 lore raw

Re: [PATCH v2 06/23] pmic: pca9450: Add upstream regulators subnode match

Quoted 9 lines · Marek Vasut

The upstream DT regulators node subnodes are named BUCKn and LDOn, the downstream DT regulators node subnodes are named buckn and ldon, add the upstream match.

Best Regards,
Jaehoon Chung

Quoted 21 lines

---
V2: Add RB by Fabio

---
 drivers/power/pmic/pca9450.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/power/pmic/pca9450.c +2 -0
index 2394b196c56..26c876c9c45 100644
@@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;
 static const struct pmic_child_info pmic_children_info[] = {
 	/* buck */
 	{ .prefix = "b", .driver = PCA9450_REGULATOR_DRIVER},
+	{ .prefix = "B", .driver = PCA9450_REGULATOR_DRIVER},
 	/* ldo */
 	{ .prefix = "l", .driver = PCA9450_REGULATOR_DRIVER},
+	{ .prefix = "L", .driver = PCA9450_REGULATOR_DRIVER},
 	{ },
 };
 
#10 lore raw

PATCH v2 7/23 pmic: pca9450: Add regulator driver

In reply to Marek Vasut

Add PCA9450 regulator driver. This is complementary driver for the BUCKn and LDOn regulators provided by the PCA9450 PMIC driver. Currently the driver permits reading the settngs and configuring the BUCKn and LDOn regulators.

---
V2: Add RB by Fabio

---
 drivers/power/pmic/pca9450.c      |   6 +-
 drivers/power/regulator/Kconfig   |  15 ++
 drivers/power/regulator/Makefile  |   1 +
 drivers/power/regulator/pca9450.c | 333 ++++++++++++++++++++++++++++++
 include/power/pca9450.h           |  11 +
 5 files changed, 363 insertions(+), 3 deletions(-)
 create mode 100644 drivers/power/regulator/pca9450.c
drivers/power/pmic/pca9450.c +3 -3
index 26c876c9c45..116ac49a8db 100644
@@ -83,9 +83,9 @@ static struct dm_pmic_ops pca9450_ops = {
 };
 
 static const struct udevice_id pca9450_ids[] = {
-	{ .compatible = "nxp,pca9450a", .data = 0x25, },
-	{ .compatible = "nxp,pca9450b", .data = 0x25, },
-	{ .compatible = "nxp,pca9450c", .data = 0x25, },
+	{ .compatible = "nxp,pca9450a", .data = NXP_CHIP_TYPE_PCA9450A, },
+	{ .compatible = "nxp,pca9450b", .data = NXP_CHIP_TYPE_PCA9450BC, },
+	{ .compatible = "nxp,pca9450c", .data = NXP_CHIP_TYPE_PCA9450BC, },
 	{ }
 };
 
drivers/power/regulator/Kconfig +15 -0
index cd253b95f2f..d486bad6bdc 100644
@@ -60,6 +60,21 @@ config SPL_DM_REGULATOR_BD71837
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM BD71837 and BD71847 in SPL.
 
+config DM_REGULATOR_PCA9450
+	bool "Enable Driver Model for NXP PCA9450 regulators"
+	depends on DM_REGULATOR && DM_PMIC_PCA9450
+	help
+	This config enables implementation of driver-model regulator uclass
+	features for regulators on NXP PCA9450 PMICs. PCA9450 contains 6 bucks
+	and 5 LDOS. The driver implements get/set api for value and enable.
+
+config SPL_DM_REGULATOR_PCA9450
+	bool "Enable Driver Model for NXP PCA9450 regulators in SPL"
+	depends on DM_REGULATOR_PCA9450
+	help
+	This config enables implementation of driver-model regulator uclass
+	features for regulators on ROHM PCA9450 in SPL.
+
 config DM_REGULATOR_DA9063
 	bool "Enable Driver Model for REGULATOR DA9063"
 	depends on DM_REGULATOR && DM_PMIC_DA9063
drivers/power/regulator/Makefile +1 -0
index 4efb32a3228..d2d17f7aed0 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o
 obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
drivers/power/regulator/pca9450.c new file +333 -0

333 lines not on this page · raw message

include/power/pca9450.h +11 -0
index 27703bb1f91..b714fc3477d 100644
@@ -56,4 +56,15 @@ enum {
 
 int power_pca9450_init(unsigned char bus, unsigned char addr);
 
+enum {
+	NXP_CHIP_TYPE_PCA9450A = 0,
+	NXP_CHIP_TYPE_PCA9450BC,
+	NXP_CHIP_TYPE_AMOUNT
+};
+
+#define DVS_BUCK_RUN_MASK		0x7f
+#define PCA9450_LDO12_MASK		0x07
+#define PCA9450_LDO34_MASK		0x1f
+#define PCA9450_LDO5_MASK		0x0f
+
 #endif
Signature · 1 line
2.35.1
Reviewed-by on v2 7/23
#11 lore raw

Re: [PATCH v2 07/23] pmic: pca9450: Add regulator driver

Quoted 10 lines · Marek Vasut

Add PCA9450 regulator driver. This is complementary driver for the BUCKn and LDOn regulators provided by the PCA9450 PMIC driver. Currently the driver permits reading the settngs and configuring the BUCKn and LDOn regulators.

Best Regards,
Jaehoon Chung

Quoted 425 lines

---
V2: Add RB by Fabio

---
 drivers/power/pmic/pca9450.c      |   6 +-
 drivers/power/regulator/Kconfig   |  15 ++
 drivers/power/regulator/Makefile  |   1 +
 drivers/power/regulator/pca9450.c | 333 ++++++++++++++++++++++++++++++
 include/power/pca9450.h           |  11 +
 5 files changed, 363 insertions(+), 3 deletions(-)
 create mode 100644 drivers/power/regulator/pca9450.c
drivers/power/pmic/pca9450.c +3 -3
index 26c876c9c45..116ac49a8db 100644
@@ -83,9 +83,9 @@ static struct dm_pmic_ops pca9450_ops = {
 };
 
 static const struct udevice_id pca9450_ids[] = {
-	{ .compatible = "nxp,pca9450a", .data = 0x25, },
-	{ .compatible = "nxp,pca9450b", .data = 0x25, },
-	{ .compatible = "nxp,pca9450c", .data = 0x25, },
+	{ .compatible = "nxp,pca9450a", .data = NXP_CHIP_TYPE_PCA9450A, },
+	{ .compatible = "nxp,pca9450b", .data = NXP_CHIP_TYPE_PCA9450BC, },
+	{ .compatible = "nxp,pca9450c", .data = NXP_CHIP_TYPE_PCA9450BC, },
 	{ }
 };
 
drivers/power/regulator/Kconfig +15 -0
index cd253b95f2f..d486bad6bdc 100644
@@ -60,6 +60,21 @@ config SPL_DM_REGULATOR_BD71837
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM BD71837 and BD71847 in SPL.
 
+config DM_REGULATOR_PCA9450
+	bool "Enable Driver Model for NXP PCA9450 regulators"
+	depends on DM_REGULATOR && DM_PMIC_PCA9450
+	help
+	This config enables implementation of driver-model regulator uclass
+	features for regulators on NXP PCA9450 PMICs. PCA9450 contains 6 bucks
+	and 5 LDOS. The driver implements get/set api for value and enable.
+
+config SPL_DM_REGULATOR_PCA9450
+	bool "Enable Driver Model for NXP PCA9450 regulators in SPL"
+	depends on DM_REGULATOR_PCA9450
+	help
+	This config enables implementation of driver-model regulator uclass
+	features for regulators on ROHM PCA9450 in SPL.
+
 config DM_REGULATOR_DA9063
 	bool "Enable Driver Model for REGULATOR DA9063"
 	depends on DM_REGULATOR && DM_PMIC_DA9063
drivers/power/regulator/Makefile +1 -0
index 4efb32a3228..d2d17f7aed0 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o
 obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
drivers/power/regulator/pca9450.c new file +333 -0
new file mode 100644
index 00000000000..4847c9f90f0
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * NXP PCA9450 regulator driver
+ * Copyright (C) 2022 Marek Vasut <[email protected]>
+ *
+ * Largely based on:
+ * ROHM BD71837 regulator driver
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <linux/bitops.h>
+#include <power/pca9450.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+#define HW_STATE_CONTROL 0
+#define DEBUG
+
+/**
+ * struct pca9450_vrange - describe linear range of voltages
+ *
+ * @min_volt:	smallest voltage in range
+ * @step:	how much voltage changes at each selector step
+ * @min_sel:	smallest selector in the range
+ * @max_sel:	maximum selector in the range
+ */
+struct pca9450_vrange {
+	unsigned int	min_volt;
+	unsigned int	step;
+	u8		min_sel;
+	u8		max_sel;
+};
+
+/**
+ * struct pca9450_plat - describe regulator control registers
+ *
+ * @name:	name of the regulator. Used for matching the dt-entry
+ * @enable_reg:	register address used to enable/disable regulator
+ * @enablemask:	register mask used to enable/disable regulator
+ * @volt_reg:	register address used to configure regulator voltage
+ * @volt_mask:	register mask used to configure regulator voltage
+ * @ranges:	pointer to ranges of regulator voltages and matching register
+ *		values
+ * @numranges:	number of voltage ranges pointed by ranges
+ * @dvs:	whether the voltage can be changed when regulator is enabled
+ */
+struct pca9450_plat {
+	const char		*name;
+	u8			enable_reg;
+	u8			enablemask;
+	u8			volt_reg;
+	u8			volt_mask;
+	struct pca9450_vrange	*ranges;
+	unsigned int		numranges;
+	bool			dvs;
+};
+
+#define PCA_RANGE(_min, _vstep, _sel_low, _sel_hi) \
+{ \
+	.min_volt = (_min), .step = (_vstep), \
+	.min_sel = (_sel_low), .max_sel = (_sel_hi), \
+}
+
+#define PCA_DATA(_name, enreg, enmask, vreg, vmask, _range, _dvs) \
+{ \
+	.name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
+	.volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
+	.numranges = ARRAY_SIZE(_range), .dvs = (_dvs), \
+}
+
+static struct pca9450_vrange pca9450_buck123_vranges[] = {
+	PCA_RANGE(600000, 12500, 0, 0x7f),
+};
+
+static struct pca9450_vrange pca9450_buck456_vranges[] = {
+	PCA_RANGE(600000, 25000, 0, 0x70),
+	PCA_RANGE(3400000, 0, 0x71, 0x7f),
+};
+
+static struct pca9450_vrange pca9450_ldo1_vranges[] = {
+	PCA_RANGE(1600000, 100000, 0x0, 0x3),
+	PCA_RANGE(3000000, 100000, 0x4, 0x7),
+};
+
+static struct pca9450_vrange pca9450_ldo2_vranges[] = {
+	PCA_RANGE(800000, 50000, 0x0, 0x7),
+};
+
+static struct pca9450_vrange pca9450_ldo34_vranges[] = {
+	PCA_RANGE(800000, 100000, 0x0, 0x19),
+	PCA_RANGE(3300000, 0, 0x1a, 0x1f),
+};
+
+static struct pca9450_vrange pca9450_ldo5_vranges[] = {
+	PCA_RANGE(1800000, 100000, 0x0, 0xf),
+};
+
+/*
+ * We use enable mask 'HW_STATE_CONTROL' to indicate that this regulator
+ * must not be enabled or disabled by SW. The typical use-case for PCA9450
+ * is powering NXP i.MX8. In this use-case we (for now) only allow control
+ * for BUCK4, BUCK5, BUCK6 which are not boot critical.
+ */
+static struct pca9450_plat pca9450_reg_data[] = {
+	/* Bucks 1-3 which support dynamic voltage scaling */
+	PCA_DATA("BUCK1", PCA9450_BUCK1CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK1OUT_DVS0, DVS_BUCK_RUN_MASK,
+		 pca9450_buck123_vranges, true),
+	PCA_DATA("BUCK2", PCA9450_BUCK2CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK2OUT_DVS0, DVS_BUCK_RUN_MASK,
+		 pca9450_buck123_vranges, true),
+	PCA_DATA("BUCK3", PCA9450_BUCK3CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK3OUT_DVS0, DVS_BUCK_RUN_MASK,
+		 pca9450_buck123_vranges, true),
+	/* Bucks 4-6 which do not support dynamic voltage scaling */
+	PCA_DATA("BUCK4", PCA9450_BUCK4CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK4OUT, DVS_BUCK_RUN_MASK,
+		 pca9450_buck456_vranges, false),
+	PCA_DATA("BUCK5", PCA9450_BUCK5CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK5OUT, DVS_BUCK_RUN_MASK,
+		 pca9450_buck456_vranges, false),
+	PCA_DATA("BUCK6", PCA9450_BUCK6CTRL, HW_STATE_CONTROL,
+		 PCA9450_BUCK6OUT, DVS_BUCK_RUN_MASK,
+		 pca9450_buck456_vranges, false),
+	/* LDOs */
+	PCA_DATA("LDO1", PCA9450_LDO1CTRL, HW_STATE_CONTROL,
+		 PCA9450_LDO1CTRL, PCA9450_LDO12_MASK,
+		 pca9450_ldo1_vranges, false),
+	PCA_DATA("LDO2", PCA9450_LDO2CTRL, HW_STATE_CONTROL,
+		 PCA9450_LDO2CTRL, PCA9450_LDO12_MASK,
+		 pca9450_ldo2_vranges, false),
+	PCA_DATA("LDO3", PCA9450_LDO3CTRL, HW_STATE_CONTROL,
+		 PCA9450_LDO3CTRL, PCA9450_LDO34_MASK,
+		 pca9450_ldo34_vranges, false),
+	PCA_DATA("LDO4", PCA9450_LDO4CTRL, HW_STATE_CONTROL,
+		 PCA9450_LDO4CTRL, PCA9450_LDO34_MASK,
+		 pca9450_ldo34_vranges, false),
+	PCA_DATA("LDO5", PCA9450_LDO5CTRL_H, HW_STATE_CONTROL,
+		 PCA9450_LDO5CTRL_H, PCA9450_LDO5_MASK,
+		 pca9450_ldo5_vranges, false),
+};
+
+static int vrange_find_value(struct pca9450_vrange *r, unsigned int sel,
+			     unsigned int *val)
+{
+	if (!val || sel < r->min_sel || sel > r->max_sel)
+		return -EINVAL;
+
+	*val = r->min_volt + r->step * (sel - r->min_sel);
+	return 0;
+}
+
+static int vrange_find_selector(struct pca9450_vrange *r, int val,
+				unsigned int *sel)
+{
+	int ret = -EINVAL;
+	int num_vals = r->max_sel - r->min_sel + 1;
+
+	if (val >= r->min_volt &&
+	    val <= r->min_volt + r->step * (num_vals - 1)) {
+		if (r->step) {
+			*sel = r->min_sel + ((val - r->min_volt) / r->step);
+			ret = 0;
+		} else {
+			*sel = r->min_sel;
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static int pca9450_get_enable(struct udevice *dev)
+{
+	struct pca9450_plat *plat = dev_get_plat(dev);
+	int val;
+
+	/*
+	 * boot critical regulators on pca9450 must not be controlled by sw
+	 * due to the 'feature' which leaves power rails down if pca9450 is
+	 * reseted to snvs state. hence we can't get the state here.
+	 *
+	 * if we are alive it means we probably are on run state and
+	 * if the regulator can't be controlled we can assume it is
+	 * enabled.
+	 */
+	if (plat->enablemask == HW_STATE_CONTROL)
+		return 1;
+
+	val = pmic_reg_read(dev->parent, plat->enable_reg);
+	if (val < 0)
+		return val;
+
+	return (val & plat->enablemask);
+}
+
+static int pca9450_set_enable(struct udevice *dev, bool enable)
+{
+	int val = 0;
+	struct pca9450_plat *plat = dev_get_plat(dev);
+
+	/*
+	 * boot critical regulators on pca9450 must not be controlled by sw
+	 * due to the 'feature' which leaves power rails down if pca9450 is
+	 * reseted to snvs state. Hence we can't set the state here.
+	 */
+	if (plat->enablemask == HW_STATE_CONTROL)
+		return enable ? 0 : -EINVAL;
+
+	if (enable)
+		val = plat->enablemask;
+
+	return pmic_clrsetbits(dev->parent, plat->enable_reg, plat->enablemask,
+			       val);
+}
+
+static int pca9450_get_value(struct udevice *dev)
+{
+	struct pca9450_plat *plat = dev_get_plat(dev);
+	unsigned int reg, tmp;
+	int i, ret;
+
+	ret = pmic_reg_read(dev->parent, plat->volt_reg);
+	if (ret < 0)
+		return ret;
+
+	reg = ret;
+	reg &= plat->volt_mask;
+
+	for (i = 0; i < plat->numranges; i++) {
+		struct pca9450_vrange *r = &plat->ranges[i];
+
+		if (!vrange_find_value(r, reg, &tmp))
+			return tmp;
+	}
+
+	pr_err("Unknown voltage value read from pmic\n");
+
+	return -EINVAL;
+}
+
+static int pca9450_set_value(struct udevice *dev, int uvolt)
+{
+	struct pca9450_plat *plat = dev_get_plat(dev);
+	unsigned int sel;
+	int i, found = 0;
+
+	/*
+	 * An under/overshooting may occur if voltage is changed for other
+	 * regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
+	 * change to protect the HW
+	 */
+	if (!plat->dvs)
+		if (pca9450_get_enable(dev)) {
+			/* If the value is already set, skip the warning. */
+			if (pca9450_get_value(dev) == uvolt)
+				return 0;
+			pr_err("Only DVS bucks can be changed when enabled\n");
+			return -EINVAL;
+		}
+
+	for (i = 0; i < plat->numranges; i++) {
+		struct pca9450_vrange *r = &plat->ranges[i];
+
+		found = !vrange_find_selector(r, uvolt, &sel);
+		if (found) {
+			unsigned int tmp;
+
+			/*
+			 * We require exactly the requested value to be
+			 * supported - this can be changed later if needed
+			 */
+			found = !vrange_find_value(r, sel, &tmp);
+			if (found && tmp == uvolt)
+				break;
+			found = 0;
+		}
+	}
+
+	if (!found)
+		return -EINVAL;
+
+	return pmic_clrsetbits(dev->parent, plat->volt_reg,
+			       plat->volt_mask, sel);
+}
+
+static int pca9450_regulator_probe(struct udevice *dev)
+{
+	struct pca9450_plat *plat = dev_get_plat(dev);
+	int i, type;
+
+	type = dev_get_driver_data(dev_get_parent(dev));
+
+	if (type != NXP_CHIP_TYPE_PCA9450A && type != NXP_CHIP_TYPE_PCA9450BC) {
+		debug("Unknown PMIC type\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pca9450_reg_data); i++) {
+		if (strcmp(dev->name, pca9450_reg_data[i].name))
+			continue;
+
+		/* PCA9450B/PCA9450C uses BUCK1 and BUCK3 in dual-phase */
+		if (type == NXP_CHIP_TYPE_PCA9450BC &&
+		    !strcmp(pca9450_reg_data[i].name, "BUCK3")) {
+			continue;
+		}
+
+		*plat = pca9450_reg_data[i];
+
+		return 0;
+	}
+
+	pr_err("Unknown regulator '%s'\n", dev->name);
+
+	return -ENOENT;
+}
+
+static const struct dm_regulator_ops pca9450_regulator_ops = {
+	.get_value	= pca9450_get_value,
+	.set_value	= pca9450_set_value,
+	.get_enable	= pca9450_get_enable,
+	.set_enable	= pca9450_set_enable,
+};
+
+U_BOOT_DRIVER(pca9450_regulator) = {
+	.name		= PCA9450_REGULATOR_DRIVER,
+	.id		= UCLASS_REGULATOR,
+	.ops		= &pca9450_regulator_ops,
+	.probe		= pca9450_regulator_probe,
+	.plat_auto	= sizeof(struct pca9450_plat),
+};
include/power/pca9450.h +11 -0
index 27703bb1f91..b714fc3477d 100644
@@ -56,4 +56,15 @@ enum {
 
 int power_pca9450_init(unsigned char bus, unsigned char addr);
 
+enum {
+	NXP_CHIP_TYPE_PCA9450A = 0,
+	NXP_CHIP_TYPE_PCA9450BC,
+	NXP_CHIP_TYPE_AMOUNT
+};
+
+#define DVS_BUCK_RUN_MASK		0x7f
+#define PCA9450_LDO12_MASK		0x07
+#define PCA9450_LDO34_MASK		0x1f
+#define PCA9450_LDO5_MASK		0x0f
+
 #endif
#12 lore raw

PATCH v2 8/23 spi: nxp_fspi: Add i.MX8MP compatible string

In reply to Marek Vasut

The i.MX8M Mini and i.MX8M Plus flexspi IPs are compatible with one another, however the linux kernel DT uses separate compatible string for each SoC. Add the missing i.MX8MP compatible into this driver.

Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add RB by Peng

---
 drivers/spi/nxp_fspi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/spi/nxp_fspi.c +1 -0
index b7c922b1dfd..607c953987b 100644
@@ -1053,6 +1053,7 @@ static const struct dm_spi_ops nxp_fspi_ops = {
 static const struct udevice_id nxp_fspi_ids[] = {
 	{ .compatible = "nxp,lx2160a-fspi", .data = (ulong)&lx2160a_data, },
 	{ .compatible = "nxp,imx8mm-fspi", .data = (ulong)&imx8mm_data, },
+	{ .compatible = "nxp,imx8mp-fspi", .data = (ulong)&imx8mm_data, },
 	{ }
 };
 
Signature · 1 line
2.35.1
#13 lore raw

PATCH v2 9/23 ARM: dts: imx: Add flexspi node to i.MX8MP

In reply to Marek Vasut

Add flexspi DT node matching Linux kernel as of commit d7cd74466651e ("arm64: dts: imx8mp: Reorder flexspi clock-names entry")

Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add RB by Peng

---
 arch/arm/dts/imx8mp.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm/dts/imx8mp.dtsi +15 -0
index c2d51a46cb3..f9d64253c8a 100644
@@ -761,6 +761,21 @@
 				status = "disabled";
 			};
 
+			flexspi: spi@30bb0000 {
+				compatible = "nxp,imx8mp-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
+					 <&clk IMX8MP_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
Signature · 1 line
2.35.1
#14 lore raw

PATCH v2 10/23 ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables

In reply to Marek Vasut

Decode ECSPI boot device in env_get_location() from i.MX8M ROMAPI tables. This is necessary to correctly identify env is in SPI NOR when the system boots from SPI NOR attached to ECSPI.

---
V2: Add RB by Fabio

---
 arch/arm/include/asm/mach-imx/sys_proto.h | 1 +
 arch/arm/mach-imx/imx8m/soc.c             | 4 ++++
 2 files changed, 5 insertions(+)
arch/arm/include/asm/mach-imx/sys_proto.h +1 -0
index 0c0c7814fb2..309f8d17959 100644
@@ -159,6 +159,7 @@ enum boot_dev_type_e {
 	BT_DEV_TYPE_MMC = 2,
 	BT_DEV_TYPE_NAND = 3,
 	BT_DEV_TYPE_FLEXSPINOR = 4,
+	BT_DEV_TYPE_SPI_NOR = 6,
 
 	BT_DEV_TYPE_USB = 0xE,
 	BT_DEV_TYPE_MEM_DEV = 0xF,
arch/arm/mach-imx/imx8m/soc.c +4 -0
index 7397b99a1ee..8e972d9b0cb 100644
@@ -599,6 +599,9 @@ enum boot_device get_boot_device(void)
 	case BT_DEV_TYPE_FLEXSPINOR:
 		boot_dev = QSPI_BOOT;
 		break;
+	case BT_DEV_TYPE_SPI_NOR:
+		boot_dev = SPI_NOR_BOOT;
+		break;
 	case BT_DEV_TYPE_USB:
 		boot_dev = USB_BOOT;
 		break;
@@ -1337,6 +1340,7 @@ enum env_location env_get_location(enum env_operation op, int prio)
 
 	switch (dev) {
 	case QSPI_BOOT:
+	case SPI_NOR_BOOT:
 		if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
 			return ENVL_SPI_FLASH;
 		return ENVL_NOWHERE;
Signature · 1 line
2.35.1
#15 lore raw

PATCH v2 11/23 ARM: imx: Get rid of only i.MX8M SMCCC arch call

In reply to Marek Vasut

This is the only place where i.MX8M code does SMCCC call, remove it. The output has little value as it prints some part of commit ID, and worse, if there is no SMC handler installed, the code outright hangs or crashes the system.

By removing this one instance of SMCCC call, U-Boot no longer depends on SMC handlers and can boot without hanging in any case. If there is a need to dump this commit ID, use CMD_SMC instead and do 'smc' call from U-Boot shell or scripts instead of hard-coding SMCCC dependency into architecture code. This particular code can be replaced by:
=> smc 0xc2000003 0 0 0 0 0 0

Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add RB by Peng

---
 arch/arm/mach-imx/imx8m/soc.c | 20 --------------------
 1 file changed, 20 deletions(-)
arch/arm/mach-imx/imx8m/soc.c +0 -20
index 8e972d9b0cb..79b26d8ce5a 100644
@@ -28,7 +28,6 @@
 #include <fdt_support.h>
 #include <fsl_wdog.h>
 #include <imx_sip.h>
-#include <linux/arm-smccc.h>
 #include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -1196,27 +1195,8 @@ void reset_cpu(void)
 #endif
 
 #if defined(CONFIG_ARCH_MISC_INIT)
-static void acquire_buildinfo(void)
-{
-	u64 atf_commit = 0;
-	struct arm_smccc_res res;
-
-	/* Get ARM Trusted Firmware commit id */
-	arm_smccc_smc(IMX_SIP_BUILDINFO, IMX_SIP_BUILDINFO_GET_COMMITHASH,
-		      0, 0, 0, 0, 0, 0, &res);
-	atf_commit = res.a0;
-	if (atf_commit == 0xffffffff) {
-		debug("ATF does not support build info\n");
-		atf_commit = 0x30; /* Display 0, 0 ascii is 0x30 */
-	}
-
-	printf("\n BuildInfo:\n  - ATF %s\n\n", (char *)&atf_commit);
-}
-
 int arch_misc_init(void)
 {
-	acquire_buildinfo();
-
 	return 0;
 }
 #endif
Signature · 1 line
2.35.1
#16 lore raw

PATCH v2 12/23 power-domain: Return 0 if ops unimplemented and remove empty functions

In reply to Marek Vasut

In case the ops is not implemented, return 0 in the core right away. This is better than having multiple copies of functions which just return 0 in each power domain driver. Drop all those empty functions.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>
---
 drivers/power/domain/apple-pmgr.c             | 30 -------------------
 drivers/power/domain/bcm6328-power-domain.c   |  6 ----
 .../power/domain/imx8-power-domain-legacy.c   | 16 ----------
 drivers/power/domain/imx8-power-domain.c      | 24 ---------------
 drivers/power/domain/imx8m-power-domain.c     | 18 -----------
 drivers/power/domain/meson-ee-pwrc.c          | 12 --------
 drivers/power/domain/meson-gx-pwrc-vpu.c      | 12 --------
 drivers/power/domain/mtk-power-domain.c       |  6 ----
 drivers/power/domain/power-domain-uclass.c    |  8 ++---
 drivers/power/domain/tegra186-power-domain.c  | 26 ----------------
 drivers/power/domain/ti-power-domain.c        | 13 --------
 drivers/power/domain/ti-sci-power-domain.c    | 14 ---------
 12 files changed, 4 insertions(+), 181 deletions(-)
drivers/power/domain/apple-pmgr.c +0 -30
index 4d06e76ff5e..402c5b1fd18 100644
@@ -42,16 +42,6 @@ static int apple_reset_of_xlate(struct reset_ctl *reset_ctl,
 	return 0;
 }
 
-static int apple_reset_request(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
-static int apple_reset_free(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
 static int apple_reset_assert(struct reset_ctl *reset_ctl)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(reset_ctl->dev->parent);
@@ -80,8 +70,6 @@ static int apple_reset_deassert(struct reset_ctl *reset_ctl)
 
 struct reset_ops apple_reset_ops = {
 	.of_xlate = apple_reset_of_xlate,
-	.request = apple_reset_request,
-	.rfree = apple_reset_free,
 	.rst_assert = apple_reset_assert,
 	.rst_deassert = apple_reset_deassert,
 };
@@ -92,16 +80,6 @@ static struct driver apple_reset_driver = {
 	.ops = &apple_reset_ops,
 };
 
-static int apple_pmgr_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int apple_pmgr_rfree(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_ps_set(struct power_domain *power_domain, u32 pstate)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(power_domain->dev);
@@ -121,11 +99,6 @@ static int apple_pmgr_on(struct power_domain *power_domain)
 	return apple_pmgr_ps_set(power_domain, APPLE_PMGR_PS_ACTIVE);
 }
 
-static int apple_pmgr_off(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_of_xlate(struct power_domain *power_domain,
 			       struct ofnode_phandle_args *args)
 {
@@ -167,10 +140,7 @@ static int apple_pmgr_probe(struct udevice *dev)
 }
 
 struct power_domain_ops apple_pmgr_ops = {
-	.request = apple_pmgr_request,
-	.rfree = apple_pmgr_rfree,
 	.on = apple_pmgr_on,
-	.off = apple_pmgr_off,
 	.of_xlate = apple_pmgr_of_xlate,
 };
 
drivers/power/domain/bcm6328-power-domain.c +0 -6
index 6e720e0798c..80144dd9772 100644
@@ -24,11 +24,6 @@ static int bcm6328_power_domain_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int bcm6328_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int bcm6328_power_domain_on(struct power_domain *power_domain)
 {
 	struct bcm6328_power_domain *priv = dev_get_priv(power_domain->dev);
@@ -64,7 +59,6 @@ static const struct udevice_id bcm6328_power_domain_ids[] = {
 };
 
 struct power_domain_ops bcm6328_power_domain_ops = {
-	.rfree = bcm6328_power_domain_free,
 	.off = bcm6328_power_domain_off,
 	.on = bcm6328_power_domain_on,
 	.request = bcm6328_power_domain_request,
drivers/power/domain/imx8-power-domain-legacy.c +0 -16
index e2fae2dbc86..bf45891bccd 100644
@@ -84,20 +84,6 @@ int imx8_power_domain_lookup_name(const char *name,
 	return 0;
 }
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -364,8 +350,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 	.of_xlate = imx8_power_domain_of_xlate,
drivers/power/domain/imx8-power-domain.c +0 -24
index 6461ab23d62..17b5d57b19b 100644
@@ -12,20 +12,6 @@
 #include <asm/arch/power-domain.h>
 #include <asm/arch/sci/sci.h>
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	u32 resource_id = power_domain->id;
@@ -60,13 +46,6 @@ static int imx8_power_domain_off(struct power_domain *power_domain)
 	return 0;
 }
 
-static int imx8_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%s)\n", __func__, dev->name);
-
-	return 0;
-}
-
 static const struct udevice_id imx8_power_domain_ids[] = {
 	{ .compatible = "fsl,imx8qxp-scu-pd" },
 	{ .compatible = "fsl,scu-pd" },
@@ -74,8 +53,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops_v2 = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 };
@@ -84,6 +61,5 @@ U_BOOT_DRIVER(imx8_power_domain_v2) = {
 	.name = "imx8_power_domain_v2",
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8_power_domain_ids,
-	.probe = imx8_power_domain_probe,
 	.ops = &imx8_power_domain_ops_v2,
 };
drivers/power/domain/imx8m-power-domain.c +0 -18
index 5d34bc12902..6082ee6ff8c 100644
@@ -18,16 +18,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int imx8m_power_domain_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int imx8m_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -100,11 +90,6 @@ static int imx8m_power_domain_bind(struct udevice *dev)
 	return 0;
 }
 
-static int imx8m_power_domain_probe(struct udevice *dev)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_of_to_plat(struct udevice *dev)
 {
 	struct imx8m_power_domain_plat *pdata = dev_get_plat(dev);
@@ -126,8 +111,6 @@ static const struct udevice_id imx8m_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8m_power_domain_ops = {
-	.request = imx8m_power_domain_request,
-	.rfree = imx8m_power_domain_free,
 	.on = imx8m_power_domain_on,
 	.off = imx8m_power_domain_off,
 	.of_xlate = imx8m_power_domain_of_xlate,
@@ -138,7 +121,6 @@ U_BOOT_DRIVER(imx8m_power_domain) = {
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8m_power_domain_ids,
 	.bind = imx8m_power_domain_bind,
-	.probe = imx8m_power_domain_probe,
 	.of_to_plat = imx8m_power_domain_of_to_plat,
 	.plat_auto	= sizeof(struct imx8m_power_domain_plat),
 	.ops = &imx8m_power_domain_ops,
drivers/power/domain/meson-ee-pwrc.c +0 -12
index a4d50e701ae..676fded8080 100644
@@ -273,16 +273,6 @@ static bool pwrc_ee_get_power(struct power_domain *power_domain)
 	return (reg & pwrc_domain->top_pd->sleep_mask);
 }
 
-static int meson_ee_pwrc_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_ee_pwrc_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_ee_pwrc_off(struct power_domain *power_domain)
 {
 	struct meson_ee_pwrc_priv *priv = dev_get_priv(power_domain->dev);
@@ -387,10 +377,8 @@ static int meson_ee_pwrc_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_ee_pwrc_ops = {
-	.rfree = meson_ee_pwrc_free,
 	.off = meson_ee_pwrc_off,
 	.on = meson_ee_pwrc_on,
-	.request = meson_ee_pwrc_request,
 	.of_xlate = meson_ee_pwrc_of_xlate,
 };
 
drivers/power/domain/meson-gx-pwrc-vpu.c +0 -12
index eb94af2cf83..612660ce89f 100644
@@ -45,16 +45,6 @@ struct meson_gx_pwrc_vpu_priv {
 	struct clk_bulk clks;
 };
 
-static int meson_pwrc_vpu_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_pwrc_vpu_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_gx_pwrc_vpu_on(struct power_domain *power_domain)
 {
 	struct meson_gx_pwrc_vpu_priv *priv = dev_get_priv(power_domain->dev);
@@ -274,10 +264,8 @@ static int meson_pwrc_vpu_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_gx_pwrc_vpu_ops = {
-	.rfree = meson_pwrc_vpu_free,
 	.off = meson_pwrc_vpu_off,
 	.on = meson_pwrc_vpu_on,
-	.request = meson_pwrc_vpu_request,
 	.of_xlate = meson_pwrc_vpu_of_xlate,
 };
 
drivers/power/domain/mtk-power-domain.c +0 -6
index ca2ded00efa..3b84147d481 100644
@@ -317,11 +317,6 @@ static int scpsys_power_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int scpsys_power_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int mtk_power_domain_hook(struct udevice *dev)
 {
 	struct scp_domain *scpd = dev_get_priv(dev);
@@ -399,7 +394,6 @@ static const struct udevice_id mtk_power_domain_ids[] = {
 };
 
 struct power_domain_ops mtk_power_domain_ops = {
-	.rfree = scpsys_power_free,
 	.off = scpsys_power_off,
 	.on = scpsys_power_on,
 	.request = scpsys_power_request,
drivers/power/domain/power-domain-uclass.c +4 -4
index 33f9206bd09..0c5823ceddf 100644
@@ -71,7 +71,7 @@ int power_domain_get_by_index(struct udevice *dev,
 		return ret;
 	}
 
-	ret = ops->request(power_domain);
+	ret = ops->request ? ops->request(power_domain) : 0;
 	if (ret) {
 		debug("ops->request() failed: %d\n", ret);
 		return ret;
@@ -91,7 +91,7 @@ int power_domain_free(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->rfree(power_domain);
+	return ops->rfree ? ops->rfree(power_domain) : 0;
 }
 
 int power_domain_on(struct power_domain *power_domain)
@@ -100,7 +100,7 @@ int power_domain_on(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->on(power_domain);
+	return ops->on ? ops->on(power_domain) : 0;
 }
 
 int power_domain_off(struct power_domain *power_domain)
@@ -109,7 +109,7 @@ int power_domain_off(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->off(power_domain);
+	return ops->off ? ops->off(power_domain) : 0;
 }
 
 #if CONFIG_IS_ENABLED(OF_REAL)
drivers/power/domain/tegra186-power-domain.c +0 -26
index 707735cf851..46da541b75a 100644
@@ -15,22 +15,6 @@
 #define UPDATE	BIT(0)
 #define ON	BIT(1)
 
-static int tegra186_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
-static int tegra186_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
 static int tegra186_power_domain_common(struct power_domain *power_domain,
 					bool on)
 {
@@ -73,22 +57,12 @@ static int tegra186_power_domain_off(struct power_domain *power_domain)
 }
 
 struct power_domain_ops tegra186_power_domain_ops = {
-	.request = tegra186_power_domain_request,
-	.rfree = tegra186_power_domain_free,
 	.on = tegra186_power_domain_on,
 	.off = tegra186_power_domain_off,
 };
 
-static int tegra186_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%p)\n", __func__, dev);
-
-	return 0;
-}
-
 U_BOOT_DRIVER(tegra186_power_domain) = {
 	.name = "tegra186_power_domain",
 	.id = UCLASS_POWER_DOMAIN,
-	.probe = tegra186_power_domain_probe,
 	.ops = &tegra186_power_domain_ops,
 };
drivers/power/domain/ti-power-domain.c +0 -13
index a7dadf2eea7..89e229b36f3 100644
@@ -339,17 +339,6 @@ static int ti_power_domain_of_xlate(struct power_domain *pd,
 
 	return 0;
 }
-
-static int ti_power_domain_request(struct power_domain *pd)
-{
-	return 0;
-}
-
-static int ti_power_domain_free(struct power_domain *pd)
-{
-	return 0;
-}
-
 static const struct udevice_id ti_power_domain_of_match[] = {
 	{ .compatible = "ti,sci-pm-domain" },
 	{ /* sentinel */ }
@@ -359,8 +348,6 @@ static struct power_domain_ops ti_power_domain_ops = {
 	.on = ti_power_domain_on,
 	.off = ti_power_domain_off,
 	.of_xlate = ti_power_domain_of_xlate,
-	.request = ti_power_domain_request,
-	.rfree = ti_power_domain_free,
 };
 
 U_BOOT_DRIVER(ti_pm_domains) = {
drivers/power/domain/ti-sci-power-domain.c +0 -14
index f18e45617a1..0140e5e5217 100644
@@ -44,18 +44,6 @@ static int ti_sci_power_domain_probe(struct udevice *dev)
 	return 0;
 }
 
-static int ti_sci_power_domain_request(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
-static int ti_sci_power_domain_free(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
 static int ti_sci_power_domain_on(struct power_domain *pd)
 {
 	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
@@ -123,8 +111,6 @@ static const struct udevice_id ti_sci_power_domain_of_match[] = {
 };
 
 static struct power_domain_ops ti_sci_power_domain_ops = {
-	.request = ti_sci_power_domain_request,
-	.rfree = ti_sci_power_domain_free,
 	.on = ti_sci_power_domain_on,
 	.off = ti_sci_power_domain_off,
 	.of_xlate = ti_sci_power_domain_of_xlate,
Signature · 1 line
2.35.1
Reviewed-by on v2 12/23
#17 lore raw

Re: [PATCH v2 12/23] power-domain: Return 0 if ops unimplemented and remove empty functions

Quoted 7 lines · Marek Vasut

In case the ops is not implemented, return 0 in the core right away. This is better than having multiple copies of functions which just return 0 in each power domain driver. Drop all those empty functions.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>

Best Regards,
Jaehoon Chung

Quoted 489 lines
---
 drivers/power/domain/apple-pmgr.c             | 30 -------------------
 drivers/power/domain/bcm6328-power-domain.c   |  6 ----
 .../power/domain/imx8-power-domain-legacy.c   | 16 ----------
 drivers/power/domain/imx8-power-domain.c      | 24 ---------------
 drivers/power/domain/imx8m-power-domain.c     | 18 -----------
 drivers/power/domain/meson-ee-pwrc.c          | 12 --------
 drivers/power/domain/meson-gx-pwrc-vpu.c      | 12 --------
 drivers/power/domain/mtk-power-domain.c       |  6 ----
 drivers/power/domain/power-domain-uclass.c    |  8 ++---
 drivers/power/domain/tegra186-power-domain.c  | 26 ----------------
 drivers/power/domain/ti-power-domain.c        | 13 --------
 drivers/power/domain/ti-sci-power-domain.c    | 14 ---------
 12 files changed, 4 insertions(+), 181 deletions(-)
drivers/power/domain/apple-pmgr.c +0 -30
index 4d06e76ff5e..402c5b1fd18 100644
@@ -42,16 +42,6 @@ static int apple_reset_of_xlate(struct reset_ctl *reset_ctl,
 	return 0;
 }
 
-static int apple_reset_request(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
-static int apple_reset_free(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
 static int apple_reset_assert(struct reset_ctl *reset_ctl)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(reset_ctl->dev->parent);
@@ -80,8 +70,6 @@ static int apple_reset_deassert(struct reset_ctl *reset_ctl)
 
 struct reset_ops apple_reset_ops = {
 	.of_xlate = apple_reset_of_xlate,
-	.request = apple_reset_request,
-	.rfree = apple_reset_free,
 	.rst_assert = apple_reset_assert,
 	.rst_deassert = apple_reset_deassert,
 };
@@ -92,16 +80,6 @@ static struct driver apple_reset_driver = {
 	.ops = &apple_reset_ops,
 };
 
-static int apple_pmgr_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int apple_pmgr_rfree(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_ps_set(struct power_domain *power_domain, u32 pstate)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(power_domain->dev);
@@ -121,11 +99,6 @@ static int apple_pmgr_on(struct power_domain *power_domain)
 	return apple_pmgr_ps_set(power_domain, APPLE_PMGR_PS_ACTIVE);
 }
 
-static int apple_pmgr_off(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_of_xlate(struct power_domain *power_domain,
 			       struct ofnode_phandle_args *args)
 {
@@ -167,10 +140,7 @@ static int apple_pmgr_probe(struct udevice *dev)
 }
 
 struct power_domain_ops apple_pmgr_ops = {
-	.request = apple_pmgr_request,
-	.rfree = apple_pmgr_rfree,
 	.on = apple_pmgr_on,
-	.off = apple_pmgr_off,
 	.of_xlate = apple_pmgr_of_xlate,
 };
 
drivers/power/domain/bcm6328-power-domain.c +0 -6
index 6e720e0798c..80144dd9772 100644
@@ -24,11 +24,6 @@ static int bcm6328_power_domain_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int bcm6328_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int bcm6328_power_domain_on(struct power_domain *power_domain)
 {
 	struct bcm6328_power_domain *priv = dev_get_priv(power_domain->dev);
@@ -64,7 +59,6 @@ static const struct udevice_id bcm6328_power_domain_ids[] = {
 };
 
 struct power_domain_ops bcm6328_power_domain_ops = {
-	.rfree = bcm6328_power_domain_free,
 	.off = bcm6328_power_domain_off,
 	.on = bcm6328_power_domain_on,
 	.request = bcm6328_power_domain_request,
drivers/power/domain/imx8-power-domain-legacy.c +0 -16
index e2fae2dbc86..bf45891bccd 100644
@@ -84,20 +84,6 @@ int imx8_power_domain_lookup_name(const char *name,
 	return 0;
 }
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -364,8 +350,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 	.of_xlate = imx8_power_domain_of_xlate,
drivers/power/domain/imx8-power-domain.c +0 -24
index 6461ab23d62..17b5d57b19b 100644
@@ -12,20 +12,6 @@
 #include <asm/arch/power-domain.h>
 #include <asm/arch/sci/sci.h>
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	u32 resource_id = power_domain->id;
@@ -60,13 +46,6 @@ static int imx8_power_domain_off(struct power_domain *power_domain)
 	return 0;
 }
 
-static int imx8_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%s)\n", __func__, dev->name);
-
-	return 0;
-}
-
 static const struct udevice_id imx8_power_domain_ids[] = {
 	{ .compatible = "fsl,imx8qxp-scu-pd" },
 	{ .compatible = "fsl,scu-pd" },
@@ -74,8 +53,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops_v2 = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 };
@@ -84,6 +61,5 @@ U_BOOT_DRIVER(imx8_power_domain_v2) = {
 	.name = "imx8_power_domain_v2",
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8_power_domain_ids,
-	.probe = imx8_power_domain_probe,
 	.ops = &imx8_power_domain_ops_v2,
 };
drivers/power/domain/imx8m-power-domain.c +0 -18
index 5d34bc12902..6082ee6ff8c 100644
@@ -18,16 +18,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int imx8m_power_domain_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int imx8m_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -100,11 +90,6 @@ static int imx8m_power_domain_bind(struct udevice *dev)
 	return 0;
 }
 
-static int imx8m_power_domain_probe(struct udevice *dev)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_of_to_plat(struct udevice *dev)
 {
 	struct imx8m_power_domain_plat *pdata = dev_get_plat(dev);
@@ -126,8 +111,6 @@ static const struct udevice_id imx8m_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8m_power_domain_ops = {
-	.request = imx8m_power_domain_request,
-	.rfree = imx8m_power_domain_free,
 	.on = imx8m_power_domain_on,
 	.off = imx8m_power_domain_off,
 	.of_xlate = imx8m_power_domain_of_xlate,
@@ -138,7 +121,6 @@ U_BOOT_DRIVER(imx8m_power_domain) = {
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8m_power_domain_ids,
 	.bind = imx8m_power_domain_bind,
-	.probe = imx8m_power_domain_probe,
 	.of_to_plat = imx8m_power_domain_of_to_plat,
 	.plat_auto	= sizeof(struct imx8m_power_domain_plat),
 	.ops = &imx8m_power_domain_ops,
drivers/power/domain/meson-ee-pwrc.c +0 -12
index a4d50e701ae..676fded8080 100644
@@ -273,16 +273,6 @@ static bool pwrc_ee_get_power(struct power_domain *power_domain)
 	return (reg & pwrc_domain->top_pd->sleep_mask);
 }
 
-static int meson_ee_pwrc_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_ee_pwrc_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_ee_pwrc_off(struct power_domain *power_domain)
 {
 	struct meson_ee_pwrc_priv *priv = dev_get_priv(power_domain->dev);
@@ -387,10 +377,8 @@ static int meson_ee_pwrc_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_ee_pwrc_ops = {
-	.rfree = meson_ee_pwrc_free,
 	.off = meson_ee_pwrc_off,
 	.on = meson_ee_pwrc_on,
-	.request = meson_ee_pwrc_request,
 	.of_xlate = meson_ee_pwrc_of_xlate,
 };
 
drivers/power/domain/meson-gx-pwrc-vpu.c +0 -12
index eb94af2cf83..612660ce89f 100644
@@ -45,16 +45,6 @@ struct meson_gx_pwrc_vpu_priv {
 	struct clk_bulk clks;
 };
 
-static int meson_pwrc_vpu_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_pwrc_vpu_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_gx_pwrc_vpu_on(struct power_domain *power_domain)
 {
 	struct meson_gx_pwrc_vpu_priv *priv = dev_get_priv(power_domain->dev);
@@ -274,10 +264,8 @@ static int meson_pwrc_vpu_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_gx_pwrc_vpu_ops = {
-	.rfree = meson_pwrc_vpu_free,
 	.off = meson_pwrc_vpu_off,
 	.on = meson_pwrc_vpu_on,
-	.request = meson_pwrc_vpu_request,
 	.of_xlate = meson_pwrc_vpu_of_xlate,
 };
 
drivers/power/domain/mtk-power-domain.c +0 -6
index ca2ded00efa..3b84147d481 100644
@@ -317,11 +317,6 @@ static int scpsys_power_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int scpsys_power_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int mtk_power_domain_hook(struct udevice *dev)
 {
 	struct scp_domain *scpd = dev_get_priv(dev);
@@ -399,7 +394,6 @@ static const struct udevice_id mtk_power_domain_ids[] = {
 };
 
 struct power_domain_ops mtk_power_domain_ops = {
-	.rfree = scpsys_power_free,
 	.off = scpsys_power_off,
 	.on = scpsys_power_on,
 	.request = scpsys_power_request,
drivers/power/domain/power-domain-uclass.c +4 -4
index 33f9206bd09..0c5823ceddf 100644
@@ -71,7 +71,7 @@ int power_domain_get_by_index(struct udevice *dev,
 		return ret;
 	}
 
-	ret = ops->request(power_domain);
+	ret = ops->request ? ops->request(power_domain) : 0;
 	if (ret) {
 		debug("ops->request() failed: %d\n", ret);
 		return ret;
@@ -91,7 +91,7 @@ int power_domain_free(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->rfree(power_domain);
+	return ops->rfree ? ops->rfree(power_domain) : 0;
 }
 
 int power_domain_on(struct power_domain *power_domain)
@@ -100,7 +100,7 @@ int power_domain_on(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->on(power_domain);
+	return ops->on ? ops->on(power_domain) : 0;
 }
 
 int power_domain_off(struct power_domain *power_domain)
@@ -109,7 +109,7 @@ int power_domain_off(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->off(power_domain);
+	return ops->off ? ops->off(power_domain) : 0;
 }
 
 #if CONFIG_IS_ENABLED(OF_REAL)
drivers/power/domain/tegra186-power-domain.c +0 -26
index 707735cf851..46da541b75a 100644
@@ -15,22 +15,6 @@
 #define UPDATE	BIT(0)
 #define ON	BIT(1)
 
-static int tegra186_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
-static int tegra186_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
 static int tegra186_power_domain_common(struct power_domain *power_domain,
 					bool on)
 {
@@ -73,22 +57,12 @@ static int tegra186_power_domain_off(struct power_domain *power_domain)
 }
 
 struct power_domain_ops tegra186_power_domain_ops = {
-	.request = tegra186_power_domain_request,
-	.rfree = tegra186_power_domain_free,
 	.on = tegra186_power_domain_on,
 	.off = tegra186_power_domain_off,
 };
 
-static int tegra186_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%p)\n", __func__, dev);
-
-	return 0;
-}
-
 U_BOOT_DRIVER(tegra186_power_domain) = {
 	.name = "tegra186_power_domain",
 	.id = UCLASS_POWER_DOMAIN,
-	.probe = tegra186_power_domain_probe,
 	.ops = &tegra186_power_domain_ops,
 };
drivers/power/domain/ti-power-domain.c +0 -13
index a7dadf2eea7..89e229b36f3 100644
@@ -339,17 +339,6 @@ static int ti_power_domain_of_xlate(struct power_domain *pd,
 
 	return 0;
 }
-
-static int ti_power_domain_request(struct power_domain *pd)
-{
-	return 0;
-}
-
-static int ti_power_domain_free(struct power_domain *pd)
-{
-	return 0;
-}
-
 static const struct udevice_id ti_power_domain_of_match[] = {
 	{ .compatible = "ti,sci-pm-domain" },
 	{ /* sentinel */ }
@@ -359,8 +348,6 @@ static struct power_domain_ops ti_power_domain_ops = {
 	.on = ti_power_domain_on,
 	.off = ti_power_domain_off,
 	.of_xlate = ti_power_domain_of_xlate,
-	.request = ti_power_domain_request,
-	.rfree = ti_power_domain_free,
 };
 
 U_BOOT_DRIVER(ti_pm_domains) = {
drivers/power/domain/ti-sci-power-domain.c +0 -14
index f18e45617a1..0140e5e5217 100644
@@ -44,18 +44,6 @@ static int ti_sci_power_domain_probe(struct udevice *dev)
 	return 0;
 }
 
-static int ti_sci_power_domain_request(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
-static int ti_sci_power_domain_free(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
 static int ti_sci_power_domain_on(struct power_domain *pd)
 {
 	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
@@ -123,8 +111,6 @@ static const struct udevice_id ti_sci_power_domain_of_match[] = {
 };
 
 static struct power_domain_ops ti_sci_power_domain_ops = {
-	.request = ti_sci_power_domain_request,
-	.rfree = ti_sci_power_domain_free,
 	.on = ti_sci_power_domain_on,
 	.off = ti_sci_power_domain_off,
 	.of_xlate = ti_sci_power_domain_of_xlate,
#18 lore raw

PATCH v2 13/23 imx: power-domain: Descend into pgc subnode if present

In reply to Marek Vasut

In case the power domain node structure is gpc@303a0000/pgc/power-domain@N, do not bind power domain driver to the 'pgc' node, but rather descend into it and only bind power domain drivers to power-domain@N subnodes. This way we do not waste one useless driver instance associated with 'pgc' node.

---
V2: Add TB by Tim

---
 drivers/power/domain/imx8m-power-domain.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/power/domain/imx8m-power-domain.c +6 -0
index 6082ee6ff8c..ac7411f8327 100644
@@ -73,6 +73,12 @@ static int imx8m_power_domain_bind(struct udevice *dev)
 		/* Bind the subnode to this driver */
 		name = fdt_get_name(gd->fdt_blob, offset, NULL);
 
+		/* Descend into 'pgc' subnode */
+		if (!strstr(name, "power-domain")) {
+			offset = fdt_first_subnode(gd->fdt_blob, offset);
+			name = fdt_get_name(gd->fdt_blob, offset, NULL);
+		}
+
 		ret = device_bind_with_driver_data(dev, dev->driver, name,
 						   dev->driver_data,
 						   offset_to_ofnode(offset),
Signature · 1 line
2.35.1
#19 lore raw

PATCH v2 14/23 imx: power-domain: Inline arch-imx8m/power-domain.h

In reply to Marek Vasut

The arch/arm/include/asm/arch-imx8m/power-domain.h is not included anywhere except in drivers/power/domain/imx8m-power-domain.c, just inline the content and drop the header. No functional change.

---
V2: Add TB by Tim

---
 arch/arm/include/asm/arch-imx8m/power-domain.h | 15 ---------------
 drivers/power/domain/imx8m-power-domain.c      |  7 ++++++-
 2 files changed, 6 insertions(+), 16 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-imx8m/power-domain.h
arch/arm/include/asm/arch-imx8m/power-domain.h deleted +0 -15
deleted file mode 100644
index 7a833e564b5..00000000000
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2017 NXP
- */
-
-#ifndef _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-#define _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-
-struct imx8m_power_domain_plat {
-	int resource_id;
-	int has_pd;
-	struct power_domain pd;
-};
-
-#endif
drivers/power/domain/imx8m-power-domain.c +6 -1
index ac7411f8327..c32dbcc31ae 100644
@@ -9,7 +9,6 @@
 #include <power-domain-uclass.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
-#include <asm/arch/power-domain.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <dm/device-internal.h>
 #include <dm/device.h>
@@ -18,6 +17,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+struct imx8m_power_domain_plat {
+	int resource_id;
+	int has_pd;
+	struct power_domain pd;
+};
+
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
Signature · 1 line
2.35.1
Reviewed-by on v2 14/23
#20 lore raw

Re: [PATCH v2 14/23] imx: power-domain: Inline arch-imx8m/power-domain.h

Quoted 9 lines · Marek Vasut

The arch/arm/include/asm/arch-imx8m/power-domain.h is not included anywhere except in drivers/power/domain/imx8m-power-domain.c, just inline the content and drop the header. No functional change.

Best Regards,
Jaehoon Chung

Quoted 54 lines

---
V2: Add TB by Tim

---
 arch/arm/include/asm/arch-imx8m/power-domain.h | 15 ---------------
 drivers/power/domain/imx8m-power-domain.c      |  7 ++++++-
 2 files changed, 6 insertions(+), 16 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-imx8m/power-domain.h
arch/arm/include/asm/arch-imx8m/power-domain.h deleted +0 -15
deleted file mode 100644
index 7a833e564b5..00000000000
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2017 NXP
- */
-
-#ifndef _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-#define _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-
-struct imx8m_power_domain_plat {
-	int resource_id;
-	int has_pd;
-	struct power_domain pd;
-};
-
-#endif
drivers/power/domain/imx8m-power-domain.c +6 -1
index ac7411f8327..c32dbcc31ae 100644
@@ -9,7 +9,6 @@
 #include <power-domain-uclass.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
-#include <asm/arch/power-domain.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <dm/device-internal.h>
 #include <dm/device.h>
@@ -18,6 +17,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+struct imx8m_power_domain_plat {
+	int resource_id;
+	int has_pd;
+	struct power_domain pd;
+};
+
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
#21 lore raw

PATCH v2 15/23 imx: power-domain: Get rid of SMCCC dependency

In reply to Marek Vasut

This driver is the only SMCCC dependency in iMX8M U-Boot port. Rework the driver based on Linux GPCv2 driver to directly control the GPCv2 block instead of using SMCCC calls. This way, U-Boot can operate the i.MX8M power domains without depending on anything else.

This is losely based on Linux GPCv2 driver. The GPU, VPU, MIPI power domains are not supported to save space, since they are not useful in the bootloader. The only domains kept are ones for HSIO, PCIe, USB.

---
V2: Add TB by Tim

---
 drivers/power/domain/Kconfig              |   1 +
 drivers/power/domain/imx8m-power-domain.c | 379 ++++++++++++++++++++--
 2 files changed, 361 insertions(+), 19 deletions(-)
drivers/power/domain/Kconfig +1 -0
index 93d2599d83c..04fc0054323 100644
@@ -35,6 +35,7 @@ config IMX8_POWER_DOMAIN
 config IMX8M_POWER_DOMAIN
 	bool "Enable i.MX8M power domain driver"
 	depends on POWER_DOMAIN && ARCH_IMX8M
+	select CLK
 	help
 	  Enable support for manipulating NXP i.MX8M on-SoC power domains via
 	  requests to the ATF.
drivers/power/domain/imx8m-power-domain.c +360 -19

445 lines not on this page · raw message

Signature · 1 line
2.35.1
#22 lore raw

PATCH v2 16/23 power_domain: Add power_domain_get_by_name()

In reply to Marek Vasut

Implement power_domain_get_by_name() convenience function which parses DT property 'power-domain-names' and looks up power domain by matching name.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>
---
 drivers/power/domain/power-domain-uclass.c | 14 ++++++++++++++
 include/power-domain.h                     | 21 +++++++++++++++++++++
 2 files changed, 35 insertions(+)
drivers/power/domain/power-domain-uclass.c +14 -0
index 0c5823ceddf..74c33d4e2e0 100644
@@ -80,6 +80,20 @@ int power_domain_get_by_index(struct udevice *dev,
 	return 0;
 }
 
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name)
+{
+	int index;
+
+	index = dev_read_stringlist_search(dev, "power-domain-names", name);
+	if (index < 0) {
+		debug("fdt_stringlist_search() failed: %d\n", index);
+		return index;
+	}
+
+	return power_domain_get_by_index(dev, power_domain, index);
+}
+
 int power_domain_get(struct udevice *dev, struct power_domain *power_domain)
 {
 	return power_domain_get_by_index(dev, power_domain, 0);
include/power-domain.h +21 -0
index 113276b5119..2ff6c77cd76 100644
@@ -107,6 +107,27 @@ int power_domain_get_by_index(struct udevice *dev,
 }
 #endif
 
+/**
+ * power_domain_get_by_name - Get the named power domain for a device.
+ *
+ * @dev:		The client device.
+ * @power_domain:	A pointer to a power domain struct to initialize.
+ * @name:		Power domain name to be powered on.
+ *
+ * Return: 0 if OK, or a negative error code.
+ */
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name);
+#else
+static inline
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name)
+{
+	return -ENOSYS;
+}
+#endif
+
 /**
  * power_domain_free - Free a previously requested power domain.
  *
Signature · 1 line
2.35.1
#23 lore raw

PATCH v2 17/23 imx: power-domain: Add i.MX8MP support

In reply to Marek Vasut

Add i.MX8MP power domain handling into the driver. This is based on the Linux GPCv2 driver state which is soon to be in Linux next.

---
V2: Add TB by Tim

---
 drivers/power/domain/imx8m-power-domain.c | 79 +++++++++++++++++++++++
 include/dt-bindings/power/imx8mp-power.h  | 46 +++++++++++++
 2 files changed, 125 insertions(+)
 create mode 100644 include/dt-bindings/power/imx8mp-power.h
drivers/power/domain/imx8m-power-domain.c +79 -0
index e2e41cf5fee..145f6ec0cd3 100644
@@ -20,11 +20,13 @@
 
 #include <dt-bindings/power/imx8mm-power.h>
 #include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 #define GPC_PGC_CPU_MAPPING			0x0ec
+#define IMX8MP_GPC_PGC_CPU_MAPPING		0x1cc
 
 #define IMX8M_PCIE2_A53_DOMAIN			BIT(15)
 #define IMX8M_OTG2_A53_DOMAIN			BIT(5)
@@ -38,6 +40,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_OTG1_A53_DOMAIN			BIT(4)
 #define IMX8MN_MIPI_A53_DOMAIN			BIT(2)
 
+#define IMX8MP_HSIOMIX_A53_DOMAIN		BIT(19)
+#define IMX8MP_USB2_PHY_A53_DOMAIN		BIT(5)
+#define IMX8MP_USB1_PHY_A53_DOMAIN		BIT(4)
+#define IMX8MP_PCIE_PHY_A53_DOMAIN		BIT(3)
+
+#define IMX8MP_GPC_PU_PGC_SW_PUP_REQ		0x0d8
+#define IMX8MP_GPC_PU_PGC_SW_PDN_REQ		0x0e4
+
 #define GPC_PU_PGC_SW_PUP_REQ			0x0f8
 #define GPC_PU_PGC_SW_PDN_REQ			0x104
 
@@ -53,8 +63,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_OTG1_SW_Pxx_REQ			BIT(2)
 #define IMX8MN_MIPI_SW_Pxx_REQ			BIT(0)
 
+#define IMX8MP_HSIOMIX_Pxx_REQ			BIT(17)
+#define IMX8MP_USB2_PHY_Pxx_REQ			BIT(3)
+#define IMX8MP_USB1_PHY_Pxx_REQ			BIT(2)
+#define IMX8MP_PCIE_PHY_SW_Pxx_REQ		BIT(1)
+
 #define GPC_M4_PU_PDN_FLG			0x1bc
 
+#define IMX8MP_GPC_PU_PWRHSK			0x190
 #define GPC_PU_PWRHSK				0x1fc
 
 #define IMX8MM_HSIO_HSK_PWRDNACKN		(BIT(23) | BIT(24))
@@ -63,6 +79,9 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_HSIO_HSK_PWRDNACKN		BIT(23)
 #define IMX8MN_HSIO_HSK_PWRDNREQN		BIT(5)
 
+#define IMX8MP_HSIOMIX_PWRDNACKN		BIT(28)
+#define IMX8MP_HSIOMIX_PWRDNREQN		BIT(12)
+
 /*
  * The PGC offset values in Reference Manual
  * (Rev. 1, 01/2018 and the older ones) GPC chapter's
@@ -80,6 +99,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define IMX8MN_PGC_OTG1			18
 
+#define IMX8MP_PGC_PCIE			13
+#define IMX8MP_PGC_USB1			14
+#define IMX8MP_PGC_USB2			15
+#define IMX8MP_PGC_HSIOMIX		29
+
 #define GPC_PGC_CTRL(n)			(0x800 + (n) * 0x40)
 #define GPC_PGC_SR(n)			(GPC_PGC_CTRL(n) + 0xc)
 
@@ -244,6 +268,58 @@ static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
 };
 #endif
 
+#ifdef CONFIG_IMX8MP
+static const struct imx_pgc_domain imx8mp_pgc_domains[] = {
+	[IMX8MP_POWER_DOMAIN_PCIE_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_PCIE_PHY_SW_Pxx_REQ,
+			.map = IMX8MP_PCIE_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_PCIE),
+	},
+
+	[IMX8MP_POWER_DOMAIN_USB1_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_USB1_PHY_Pxx_REQ,
+			.map = IMX8MP_USB1_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_USB1),
+	},
+
+	[IMX8MP_POWER_DOMAIN_USB2_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_USB2_PHY_Pxx_REQ,
+			.map = IMX8MP_USB2_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_USB2),
+	},
+
+	[IMX8MP_POWER_DOMAIN_HSIOMIX] = {
+		.bits = {
+			.pxx = IMX8MP_HSIOMIX_Pxx_REQ,
+			.map = IMX8MP_HSIOMIX_A53_DOMAIN,
+			.hskreq = IMX8MP_HSIOMIX_PWRDNREQN,
+			.hskack = IMX8MP_HSIOMIX_PWRDNACKN,
+		},
+		.pgc = BIT(IMX8MP_PGC_HSIOMIX),
+		.keep_clocks = true,
+	},
+};
+
+static const struct imx_pgc_regs imx8mp_pgc_regs = {
+	.map = IMX8MP_GPC_PGC_CPU_MAPPING,
+	.pup = IMX8MP_GPC_PU_PGC_SW_PUP_REQ,
+	.pdn = IMX8MP_GPC_PU_PGC_SW_PDN_REQ,
+	.hsk = IMX8MP_GPC_PU_PWRHSK,
+};
+
+static const struct imx_pgc_domain_data imx8mp_pgc_domain_data = {
+	.domains = imx8mp_pgc_domains,
+	.domains_num = ARRAY_SIZE(imx8mp_pgc_domains),
+	.pgc_regs = &imx8mp_pgc_regs,
+};
+#endif
+
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -457,6 +533,9 @@ static const struct udevice_id imx8m_power_domain_ids[] = {
 #endif
 #ifdef CONFIG_IMX8MN
 	{ .compatible = "fsl,imx8mn-gpc", .data = (long)&imx8mn_pgc_domain_data },
+#endif
+#ifdef CONFIG_IMX8MP
+	{ .compatible = "fsl,imx8mp-gpc", .data = (long)&imx8mp_pgc_domain_data },
 #endif
 	{ }
 };
include/dt-bindings/power/imx8mp-power.h new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.35.1
#24 lore raw

PATCH v3 18/23 imx: power-domain: Add i.MX8MP HSIOMIX driver

In reply to Marek Vasut

Add trivial driver for i.MX8MP HSIOMIX handling. This is responsible for enabling the GPCv2 power domains and clock for USB 3.0 and PCIe in the correct order. Currently supported is the USB 3.0 part which can be tested, PCIe support should be easy to add.

---
V2: Drop two left over unused variables which triggered build warning
V3: Add TB from Tim

---
 drivers/power/domain/Kconfig          |   7 ++
 drivers/power/domain/Makefile         |   1 +
 drivers/power/domain/imx8mp-hsiomix.c | 159 ++++++++++++++++++++++++++
 3 files changed, 167 insertions(+)
 create mode 100644 drivers/power/domain/imx8mp-hsiomix.c
drivers/power/domain/Kconfig +7 -0
index 04fc0054323..7e1b8c072fa 100644
@@ -40,6 +40,13 @@ config IMX8M_POWER_DOMAIN
 	  Enable support for manipulating NXP i.MX8M on-SoC power domains via
 	  requests to the ATF.
 
+config IMX8MP_HSIOMIX_BLKCTRL
+	bool "Enable i.MX8MP HSIOMIX domain driver"
+	depends on POWER_DOMAIN && IMX8MP
+	select CLK
+	help
+	  Enable support for manipulating NXP i.MX8MP on-SoC HSIOMIX block controller.
+
 config MTK_POWER_DOMAIN
 	bool "Enable the MediaTek power domain driver"
 	depends on POWER_DOMAIN && ARCH_MEDIATEK
drivers/power/domain/Makefile +1 -0
index 7c8af67dbd6..e6244776216 100644
@@ -8,6 +8,7 @@ obj-$(CONFIG_APPLE_PMGR_POWER_DOMAIN) += apple-pmgr.o
 obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
 obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain-legacy.o imx8-power-domain.o
 obj-$(CONFIG_IMX8M_POWER_DOMAIN) += imx8m-power-domain.o
+obj-$(CONFIG_IMX8MP_HSIOMIX_BLKCTRL) += imx8mp-hsiomix.o
 obj-$(CONFIG_MTK_POWER_DOMAIN) += mtk-power-domain.o
 obj-$(CONFIG_MESON_GX_VPU_POWER_DOMAIN) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_EE_POWER_DOMAIN) += meson-ee-pwrc.o
drivers/power/domain/imx8mp-hsiomix.c new file +159 -0

159 lines not on this page · raw message

Signature · 1 line
2.35.1
#25 lore raw

PATCH v3 19/23 clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock

In reply to Marek Vasut

Add clock tables required to bring up DWC3 USB, USB PHY and HSIOMIX domain.

---
V2: - Get and probe 24m clock without registering it again (suggested by Ye)
- Add 32k clock the same way for usb_root_clk
V3: - Add RB by Peng, TB by Tim

---
 drivers/clk/imx/clk-imx8mp.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
drivers/clk/imx/clk-imx8mp.c +30 -0
index ad84ce38ede..5e97604ccec 100644
@@ -76,6 +76,10 @@ static const char *imx8mp_a53_sels[] = {"clock-osc-24m", "arm_pll_out", "sys_pll
 					"sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m",
 					"audio_pll1_out", "sys_pll3_out", };
 
+static const char *imx8mp_hsio_axi_sels[] = {"clock-osc-24m", "sys_pll2_500m", "sys_pll1_800m",
+					     "sys_pll2_100m", "sys_pll2_200m", "clk_ext2",
+					     "clk_ext4", "audio_pll2_out", };
+
 static const char *imx8mp_main_axi_sels[] = {"clock-osc-24m", "sys_pll2_333m", "sys_pll1_800m",
 					     "sys_pll2_250m", "sys_pll2_1000m", "audio_pll1_out",
 					     "video_pll1_out", "sys_pll1_100m",};
@@ -156,6 +160,14 @@ static const char *imx8mp_uart4_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_
 					  "sys_pll2_100m", "sys_pll3_out", "clk_ext2",
 					  "clk_ext3", "audio_pll2_out", };
 
+static const char *imx8mp_usb_core_ref_sels[] = {"clock-osc-24m", "sys_pll1_100m", "sys_pll1_40m",
+						 "sys_pll2_100m", "sys_pll2_200m", "clk_ext2",
+						 "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mp_usb_phy_ref_sels[] = {"clock-osc-24m", "sys_pll1_100m", "sys_pll1_40m",
+					        "sys_pll2_100m", "sys_pll2_200m", "clk_ext2",
+					        "clk_ext3", "audio_pll2_out", };
+
 static const char *imx8mp_gic_sels[] = {"clock-osc-24m", "sys_pll2_200m", "sys_pll1_40m",
 					"sys_pll2_100m", "sys_pll1_800m",
 					"sys_pll2_500m", "clk_ext4", "audio_pll2_out" };
@@ -188,7 +200,9 @@ static const char *imx8mp_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", }
 
 static int imx8mp_clk_probe(struct udevice *dev)
 {
+	struct clk osc_24m_clk, osc_32k_clk;
 	void __iomem *base;
+	int ret;
 
 	base = (void *)ANATOP_BASE_ADDR;
 
@@ -236,6 +250,16 @@ static int imx8mp_clk_probe(struct udevice *dev)
 	clk_dm(IMX8MP_SYS_PLL2_500M, imx_clk_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2));
 	clk_dm(IMX8MP_SYS_PLL2_1000M, imx_clk_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1));
 
+	ret = clk_get_by_name(dev, "osc_24m", &osc_24m_clk);
+	if (ret)
+		return ret;
+	clk_dm(IMX8MP_CLK_24M, dev_get_clk_ptr(osc_24m_clk.dev));
+
+	ret = clk_get_by_name(dev, "osc_32k", &osc_32k_clk);
+	if (ret)
+		return ret;
+	clk_dm(IMX8MP_CLK_32K, dev_get_clk_ptr(osc_32k_clk.dev));
+
 	base = dev_read_addr_ptr(dev);
 	if (!base)
 		return -EINVAL;
@@ -244,6 +268,7 @@ static int imx8mp_clk_probe(struct udevice *dev)
 	clk_dm(IMX8MP_CLK_A53_CG, imx_clk_gate3("arm_a53_cg", "arm_a53_src", base + 0x8000, 28));
 	clk_dm(IMX8MP_CLK_A53_DIV, imx_clk_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3));
 
+	clk_dm(IMX8MP_CLK_HSIO_AXI, imx8m_clk_composite("hsio_axi", imx8mp_hsio_axi_sels, base + 0x8380));
 	clk_dm(IMX8MP_CLK_MAIN_AXI, imx8m_clk_composite_critical("main_axi", imx8mp_main_axi_sels, base + 0x8800));
 	clk_dm(IMX8MP_CLK_ENET_AXI, imx8m_clk_composite_critical("enet_axi", imx8mp_enet_axi_sels, base + 0x8880));
 	clk_dm(IMX8MP_CLK_NAND_USDHC_BUS, imx8m_clk_composite_critical("nand_usdhc_bus", imx8mp_nand_usdhc_sels, base + 0x8900));
@@ -273,6 +298,8 @@ static int imx8mp_clk_probe(struct udevice *dev)
 	clk_dm(IMX8MP_CLK_UART2, imx8m_clk_composite("uart2", imx8mp_uart2_sels, base + 0xaf80));
 	clk_dm(IMX8MP_CLK_UART3, imx8m_clk_composite("uart3", imx8mp_uart3_sels, base + 0xb000));
 	clk_dm(IMX8MP_CLK_UART4, imx8m_clk_composite("uart4", imx8mp_uart4_sels, base + 0xb080));
+	clk_dm(IMX8MP_CLK_USB_CORE_REF, imx8m_clk_composite("usb_core_ref", imx8mp_usb_core_ref_sels, base + 0xb100));
+	clk_dm(IMX8MP_CLK_USB_PHY_REF, imx8m_clk_composite("usb_phy_ref", imx8mp_usb_phy_ref_sels, base + 0xb180));
 	clk_dm(IMX8MP_CLK_GIC, imx8m_clk_composite_critical("gic", imx8mp_gic_sels, base + 0xb200));
 
 	clk_dm(IMX8MP_CLK_WDOG, imx8m_clk_composite("wdog", imx8mp_wdog_sels, base + 0xb900));
@@ -301,11 +328,14 @@ static int imx8mp_clk_probe(struct udevice *dev)
 	clk_dm(IMX8MP_CLK_UART2_ROOT, imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0));
 	clk_dm(IMX8MP_CLK_UART3_ROOT, imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0));
 	clk_dm(IMX8MP_CLK_UART4_ROOT, imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0));
+	clk_dm(IMX8MP_CLK_USB_ROOT, imx_clk_gate4("usb_root_clk", "osc_32k", base + 0x44d0, 0));
+	clk_dm(IMX8MP_CLK_USB_PHY_ROOT, imx_clk_gate4("usb_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0));
 	clk_dm(IMX8MP_CLK_USDHC1_ROOT, imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0));
 	clk_dm(IMX8MP_CLK_USDHC2_ROOT, imx_clk_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0));
 	clk_dm(IMX8MP_CLK_WDOG1_ROOT, imx_clk_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0));
 	clk_dm(IMX8MP_CLK_WDOG2_ROOT, imx_clk_gate4("wdog2_root_clk", "wdog", base + 0x4540, 0));
 	clk_dm(IMX8MP_CLK_WDOG3_ROOT, imx_clk_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0));
+	clk_dm(IMX8MP_CLK_HSIO_ROOT, imx_clk_gate4("hsio_root_clk", "ipg_root", base + 0x45c0, 0));
 
 	clk_dm(IMX8MP_CLK_USDHC3_ROOT, imx_clk_gate4("usdhc3_root_clk", "usdhc3", base + 0x45e0, 0));
 
Signature · 1 line
2.35.1
#26 lore raw

PATCH v2 20/23 phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY

In reply to Marek Vasut

Add initial support for i.MX8MP USB PHY, i.MX8MP USB is similar to the i.MX8MQ, except for clock and power domain design customization.

---
V2: Add TB from Tim

---
 drivers/phy/Kconfig          |  6 ++--
 drivers/phy/phy-imx8mq-usb.c | 66 +++++++++++++++++++++++++++++++++---
 2 files changed, 65 insertions(+), 7 deletions(-)
drivers/phy/Kconfig +3 -3
index d79798429b1..c01d9e09b90 100644
@@ -275,11 +275,11 @@ config PHY_MTK_TPHY
 	  so you can easily distinguish them by banks layout.
 
 config PHY_IMX8MQ_USB
-	bool "NXP i.MX8MQ USB PHY Driver"
+	bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
 	depends on PHY
-	depends on IMX8MQ
+	depends on IMX8MQ || IMX8MP
 	help
-	  Support the USB3.0 PHY in NXP i.MX8MQ SoC
+	  Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
 
 config PHY_XILINX_ZYNQMP
 	tristate "Xilinx ZynqMP PHY driver"
drivers/phy/phy-imx8mq-usb.c +62 -4

105 lines not on this page · raw message

Signature · 1 line
2.35.1
#27 lore raw

PATCH v2 20/23 phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY

Quoted 7 lines

Add initial support for i.MX8MP USB PHY, i.MX8MP USB is similar to the i.MX8MQ, except for clock and power domain design customization.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#28 lore raw

PATCH v2 21/23 usb: dwc3: Rename .select_dr_mode to .glue_configure

In reply to Marek Vasut

Rename the select_dr_mode callback to glue_configure, the callback is used for more than enforcing controller mode even on the TI chips, so change the name to a more generic one. No functional change.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add TB by Tim

---
 drivers/usb/dwc3/dwc3-generic.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/usb/dwc3/dwc3-generic.c +5 -5
index 01bd0ca190e..7e3814207e4 100644
@@ -219,11 +219,11 @@ U_BOOT_DRIVER(dwc3_generic_host) = {
 #endif
 
 struct dwc3_glue_ops {
-	void (*select_dr_mode)(struct udevice *dev, int index,
+	void (*glue_configure)(struct udevice *dev, int index,
 			       enum usb_dr_mode mode);
 };
 
-void dwc3_ti_select_dr_mode(struct udevice *dev, int index,
+void dwc3_ti_glue_configure(struct udevice *dev, int index,
 			    enum usb_dr_mode mode)
 {
 #define USBOTGSS_UTMI_OTG_STATUS		0x0084
@@ -304,7 +304,7 @@ enum dwc3_omap_utmi_mode {
 }
 
 struct dwc3_glue_ops ti_ops = {
-	.select_dr_mode = dwc3_ti_select_dr_mode,
+	.glue_configure = dwc3_ti_glue_configure,
 };
 
 static int dwc3_glue_bind(struct udevice *parent)
@@ -435,8 +435,8 @@ static int dwc3_glue_probe(struct udevice *dev)
 
 		dr_mode = usb_get_dr_mode(dev_ofnode(child));
 		device_find_next_child(&child);
-		if (ops && ops->select_dr_mode)
-			ops->select_dr_mode(dev, index, dr_mode);
+		if (ops && ops->glue_configure)
+			ops->glue_configure(dev, index, dr_mode);
 		index++;
 	}
 
Signature · 1 line
2.35.1
#29 lore raw

PATCH v2 22/23 usb: dwc3: Implement .glue_configure for i.MX8MP

In reply to Marek Vasut

The i.MX8MP glue needs to be configured based on a couple of DT properties, implement .glue_configure callback to parse those DT properties and configure the glue accordingly.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add TB by Tim

---
 drivers/usb/dwc3/dwc3-generic.c | 52 +++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
drivers/usb/dwc3/dwc3-generic.c +52 -0
index 7e3814207e4..6cf844cb483 100644
@@ -223,6 +223,57 @@ struct dwc3_glue_ops {
 			       enum usb_dr_mode mode);
 };
 
+void dwc3_imx8mp_glue_configure(struct udevice *dev, int index,
+				enum usb_dr_mode mode)
+{
+/* USB glue registers */
+#define USB_CTRL0		0x00
+#define USB_CTRL1		0x04
+
+#define USB_CTRL0_PORTPWR_EN	BIT(12) /* 1 - PPC enabled (default) */
+#define USB_CTRL0_USB3_FIXED	BIT(22) /* 1 - USB3 permanent attached */
+#define USB_CTRL0_USB2_FIXED	BIT(23) /* 1 - USB2 permanent attached */
+
+#define USB_CTRL1_OC_POLARITY	BIT(16) /* 0 - HIGH / 1 - LOW */
+#define USB_CTRL1_PWR_POLARITY	BIT(17) /* 0 - HIGH / 1 - LOW */
+	fdt_addr_t regs = dev_read_addr_index(dev, 1);
+	void *base = map_physmem(regs, 0x8, MAP_NOCACHE);
+	u32 value;
+
+	value = readl(base + USB_CTRL0);
+
+	if (dev_read_bool(dev, "fsl,permanently-attached"))
+		value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+	else
+		value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+
+	if (dev_read_bool(dev, "fsl,disable-port-power-control"))
+		value &= ~(USB_CTRL0_PORTPWR_EN);
+	else
+		value |= USB_CTRL0_PORTPWR_EN;
+
+	writel(value, base + USB_CTRL0);
+
+	value = readl(base + USB_CTRL1);
+	if (dev_read_bool(dev, "fsl,over-current-active-low"))
+		value |= USB_CTRL1_OC_POLARITY;
+	else
+		value &= ~USB_CTRL1_OC_POLARITY;
+
+	if (dev_read_bool(dev, "fsl,power-active-low"))
+		value |= USB_CTRL1_PWR_POLARITY;
+	else
+		value &= ~USB_CTRL1_PWR_POLARITY;
+
+	writel(value, base + USB_CTRL1);
+
+	unmap_physmem(base, MAP_NOCACHE);
+}
+
+struct dwc3_glue_ops imx8mp_ops = {
+	.glue_configure = dwc3_imx8mp_glue_configure,
+};
+
 void dwc3_ti_glue_configure(struct udevice *dev, int index,
 			    enum usb_dr_mode mode)
 {
@@ -464,6 +515,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
 	{ .compatible = "qcom,dwc3" },
+	{ .compatible = "fsl,imx8mp-dwc3", .data = (ulong)&imx8mp_ops },
 	{ .compatible = "fsl,imx8mq-dwc3" },
 	{ .compatible = "intel,tangier-dwc3" },
 	{ }
Signature · 1 line
2.35.1
#30 lore raw

PATCH v2 23/23 arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD

In reply to Marek Vasut

Add DT bindings for a subset of GPCv2 which handles USB and PCIe PDs, HSIOMIX PD controller and missing USB PD properties. This is required to bring up the DWC3 USB controller up.

This is based on linux next and patches which are still pending review, but which are likely going to be part of Linux 5.19:
b2d67d7bdf74 ("arm64: dts: imx8mp: disable usb3_phy1")
290918c72a29 ("arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes")
https://www.spinics.net/lists/arm-kernel/msg958501.html

---
V2: Add TB by Tim

---
 arch/arm/dts/imx8mp.dtsi | 72 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 70 insertions(+), 2 deletions(-)
arch/arm/dts/imx8mp.dtsi +70 -2
index f9d64253c8a..79b65750da9 100644
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -434,6 +435,44 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mp-gpc";
+				reg = <0x303a0000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+					};
+
+					pgc_usb1_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+					};
+
+					pgc_usb2_phy: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+					};
+
+					pgc_hsiomix: power-domains@17 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
@@ -842,6 +881,28 @@
 			};
 		};
 
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hsio_blk_ctrl: blk-ctrl@32f10000 {
+				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+				reg = <0x32f10000 0x24>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_PCIE_ROOT>;
+				clock-names = "usb", "pcie";
+				power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+						<&pgc_usb1_phy>, <&pgc_usb2_phy>,
+						<&pgc_hsiomix>, <&pgc_pcie_phy>;
+				power-domain-names = "bus", "usb", "usb-phy1",
+						     "usb-phy2", "pcie", "pcie-phy";
+				#power-domain-cells = <1>;
+			};
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
@@ -865,17 +926,20 @@
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
 
 		usb3_0: usb@32f10100 {
 			compatible = "fsl,imx8mp-dwc3";
-			reg = <0x32f10100 0x8>;
+			reg = <0x32f10100 0x8>,
+			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -907,16 +971,20 @@
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
 			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		usb3_1: usb@32f10108 {
 			compatible = "fsl,imx8mp-dwc3";
-			reg = <0x32f10108 0x8>;
+			reg = <0x32f10108 0x8>,
+			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
Signature · 1 line
2.35.1
#31 lore raw
In reply to Marek Vasut

Hi Marek,

this series contains some patches that were already posted and I have integrated in u-boot-imx. Can you rebase your series on top of u-boot-imx and repost the missing ones ? Thanks !

Best regards,
Stefano

Quoted 27 lines · Marek Vasut

Add compatible string for i.MX8MP, which permits i.MX8MP to use HS400ES mode, just like all the other i.MX8M.

Cc Fabio Estevam <[email protected]>
Cc Haibo Chen <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add RB from Peng

---
  drivers/mmc/fsl_esdhc_imx.c | 1 +
  1 file changed, 1 insertion(+)
drivers/mmc/fsl_esdhc_imx.c +1 -0
index 02208a5ade4..893d7e241f2 100644
@@ -1640,6 +1640,7 @@ static const struct udevice_id fsl_esdhc_ids[] = {
  	{ .compatible = "fsl,imx8qm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
  	{ .compatible = "fsl,imx8mm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
  	{ .compatible = "fsl,imx8mn-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
+	{ .compatible = "fsl,imx8mp-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
  	{ .compatible = "fsl,imx8mq-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
  	{ .compatible = "fsl,imxrt-usdhc", },
  	{ .compatible = "fsl,esdhc", },
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================