arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs
Subsystems (2)
PATCH v3 1/1 arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs
Add the missing 'uart-has-rtscts' property to UART's that have hardware flow control capability.
Signed-off-by Tim Harvey <[email protected]>
---
v3: rebase properly on imx/dt64 (without dropped patches)
v2: fix prefix of commit message and reboase on imx/dt64
--- arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 3 +++ arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 3 +++ arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 1 + 4 files changed, 8 insertions(+)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +1 -0
@@ -221,6 +221,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth {
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +3 -0
@@ -716,6 +716,7 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };
@@ -731,6 +732,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };
@@ -739,6 +741,7 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +3 -0
@@ -644,6 +644,7 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };
@@ -660,6 +661,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth {
@@ -677,6 +679,7 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +1 -0
@@ -625,6 +625,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth {
Signature · 1 line
2.17.1
Shawn Guo
AppliedQuoted 4 lines · Tim Harvey
Add the missing 'uart-has-rtscts' property to UART's that have hardware flow control capability.
Signed-off-by Tim Harvey <[email protected]>
Applied, thanks!