imx8mq: soc: Set the BYPASS ID SWAP bit (GPR10 bit 1)
Subsystems (3)
PATCH 1/1 imx8mq: soc: Set the BYPASS ID SWAP bit (GPR10 bit 1)
From: Peng Fan <[email protected]>
Set the BYPASS ID SWAP bit (GPR10 bit 1).
The ID SWAP function randomly make TZASC grant non-secure access to secure memory. TZASC ID SWAP should be bypassed by setting the bit TZASC_ID_SWAP_BYPASS(bit 1) in IOMUX_GPR10 register.
Signed-off-by Peng Fan <[email protected]>
--- arch/arm/mach-imx/imx8m/soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-imx/imx8m/soc.c +1 -1
@@ -72,7 +72,7 @@ void enable_tzc380(void)* According to TRM, TZASC_ID_SWAP_BYPASS should be set in * order to avoid AXI Bus errors when GPU is in use */ -if (is_imx8mm () ||is_imx8mn () ||is_imx8mp ()) +if (is_imx8mq () ||is_imx8mm () ||is_imx8mn () ||is_imx8mp ())setbits_le32 (&gpr->gpr[10 ],GPR_TZASC_ID_SWAP_BYPASS );/*
Signature · 1 line
2.25.1
PATCH 1/1 imx8mq: soc: Set the BYPASS ID SWAP bit (GPR10 bit 1)
Quoted 6 lines
From: Peng Fan <[email protected]>
Set the BYPASS ID SWAP bit (GPR10 bit 1).
The ID SWAP function randomly make TZASC grant non-secure access to secure memory. TZASC ID SWAP should be bypassed by setting the bitTZASC_ID_SWAP_BYPASS(bit 1)inIOMUX_GPR10register.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================