dt-bindings: hwmon: ti,tmp421: Fix type for 'ti,n-factor'

'ti,n-factor' is read as a 32-bit signed value, so the type and constraints are wrong. The same property is also defined for ti,tmp464 and is correct.

The constraints should also not be under 'items' as this property is not an array.

'ti,n-factor' is read as a 32-bit signed value, so the type and constraints are wrong. The same property is also defined for ti,tmp464 and is correct.

The constraints should also not be under 'items' as this property is not an array.

Cc Jean Delvare <[email protected]>

Cc Guenter Roeck <[email protected]>

Cc Krzysztof Kozlowski <[email protected]>

Cc [email protected]

Signed-off-by Rob Herring <[email protected]>

---
 Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml +3 -4

index 36f649938fb7..a6f1fa75a67c 100644
@@ -58,10 +58,9 @@ patternProperties:
         description: |
           The value (two's complement) to be programmed in the channel specific N correction register.
           For remote channels only.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 255
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
 
     required:
       - reg