arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
Subsystems (6)
William Zhang
maintainerv2 cover arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
This change introduces Broadcom's ARCH_BCMBCA architecture for armv7 and armv8 based Broadband SoCs. We expect to send additional patches for each SoC in the near future.
The first SoC supported in this arch is Broadcom's ARM A7 based 47622 SOC. The initial support includes a bare-bone dts for quad core ARM A7 with a ARM PL011 uart. Linux kernel image can be built with multi_v7_defconfig.
Changes for V2:
* Update compatible string and node name in the 47622.dtsi
* Change Broadcom internal list from maintainer to reviewer in MAINTAINERS
William Zhang (5):
dt-bindings: arm: add bcmbca device tree binding document
arm: bcmbca: add arch bcmbca machine entry
ARM: dts: add dts files for bcmbca soc 47622
MAINTAINERS: update MAINTAINERS file
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
.../bindings/arm/bcm/brcm,bcmbca.yaml | 33 +++++ MAINTAINERS | 14 ++ arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm47622.dtsi | 126 ++++++++++++++++++ arch/arm/boot/dts/bcm947622.dts | 30 +++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-bcm/Kconfig | 12 ++ 7 files changed, 218 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml create mode 100644 arch/arm/boot/dts/bcm47622.dtsi create mode 100644 arch/arm/boot/dts/bcm947622.dts
Signature · 1 line
2.17.1
William Zhang
maintainerPATCH v2 1/5 dt-bindings: arm: add bcmbca device tree binding document
Add arch bcmbca device tree binding document for Broadcom ARM based broadband SoC chipsets. In this change, only BCM47622 is added. Other chipsets will be added in the future.
---
.../bindings/arm/bcm/brcm,bcmbca.yaml | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml new file +33 -0
@@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC device tree bindings + +description: + Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless + chips that can be used as home gateway, router and WLAN AP for residential, + enterprise and carrier applications. + +maintainers: + - William Zhang <[email protected]> + - Anand Gore <[email protected]> + - Kursad Oney <[email protected]> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM47622 based boards + items: + - enum: + - brcm,bcm947622 + - const: brcm,bcm47622 + - const: brcm,bcmbca + +additionalProperties: true + +...
Signature · 1 line
2.17.1
Re: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
Quoted 5 lines · William Zhang
Add arch bcmbca device tree binding document for Broadcom ARM based broadband SoC chipsets. In this change, only BCM47622 is added. Other chipsets will be added in the future.
Signed-off-by William Zhang <[email protected]>
I gave you here an ack. What happened?
Best regards,
Krzysztof
William Zhang
maintainerRe: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
Hi Krzysztof,
Yeah I saw your ack. I guess I should put an ack-by in this v2 set? Still new to the upstream process and thanks for your help!
William
Quoted 12 lines · Krzysztof Kozlowski
Quoted 5 lines · William Zhang
Add arch bcmbca device tree binding document for Broadcom ARM based broadband SoC chipsets. In this change, only BCM47622 is added. Other chipsets will be added in the future.
Signed-off-by William Zhang <[email protected]>I gave you here an ack. What happened?
Best regards,
Krzysztof
Re: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
Quoted 4 lines · William Zhang
Hi Krzysztof,
Yeah I saw your ack. I guess I should put an ack-by in this v2 set? Still new to the upstream process and thanks for your help!
Yes, please add all tags before your Signed-off-by part.
https://elixir.bootlin.com/linux/v5.18-rc2/source/Documentation/process/submitting-patches.rst#L541
Best regards,
Krzysztof
William Zhang
maintainerRe: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
Quoted 10 lines · Krzysztof Kozlowski
Quoted 4 lines · William Zhang
Hi Krzysztof,
Yeah I saw your ack. I guess I should put an ack-by in this v2 set? Still new to the upstream process and thanks for your help!
Yes, please add all tags before your Signed-off-by part.
https://elixir.bootlin.com/linux/v5.18-rc2/source/Documentation/process/submitting-patches.rst#L541
Will add Acked-by: and Reviewed-by: tag in v3. Thanks!
Quoted 2 lines
Best regards,
Krzysztof
Re: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
In reply to William ZhangQuoted 3 lines · William Zhang
Add arch bcmbca device tree binding document for Broadcom ARM based broadband SoC chipsets. In this change, only BCM47622 is added. Other chipsets will be added in the future.
Best regards,
Krzysztof
Florian Fainelli
AppliedRe: [PATCH v2 1/5] dt-bindings: arm: add bcmbca device tree binding document
In reply to William ZhangQuoted 6 lines · William Zhang
Add arch bcmbca device tree binding document for Broadcom ARM based broadband SoC chipsets. In this change, only BCM47622 is added. Other chipsets will be added in the future.
Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
William Zhang
maintainerPATCH v2 2/5 arm: bcmbca: add arch bcmbca machine entry
In reply to William ZhangUpdate mach-bcm Kconfig to add ARCH_BCMBCA config and select the required configs for Broadcom Broadband SoC chipsets
---
arch/arm/mach-bcm/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/mach-bcm/Kconfig +12 -0
@@ -218,4 +218,16 @@ config ARCH_BRCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. +config ARCH_BCMBCA + bool "Broadcom Broadband SoC" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based + BCA chipset. + + This enables support for Broadcom BCA ARM-based broadband chipsets, + including the DSL, PON and Wireless family of chips. endif
Signature · 1 line
2.17.1
Florian Fainelli
AppliedRe: [PATCH v2 2/5] arm: bcmbca: add arch bcmbca machine entry
Quoted 5 lines · William Zhang
Update mach-bcm
Kconfigto addARCH_BCMBCAconfig and select the required configs for Broadcom Broadband SoC chipsetsSigned-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/soc/next, thanks! --
Florian
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
William Zhang
maintainerPATCH v2 3/5 ARM: dts: add dts files for bcmbca soc 47622
In reply to William ZhangAdd dts for ARMv7 based broadband SoC BCM47622. bcm47622.dtsi is the SoC description dts header and bcm947622.dts is a simple dts file for Broadcom BCM947622 Reference board that only enable the UART port.
---
Changes for V2:
* Update compatible string and node name in bcm47622.dtsi
arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm47622.dtsi | 126 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm947622.dts | 30 ++++++++ 3 files changed, 158 insertions(+) create mode 100644 arch/arm/boot/dts/bcm47622.dtsi create mode 100644 arch/arm/boot/dts/bcm947622.dts
arch/arm/boot/dts/Makefile +2 -0
@@ -179,6 +179,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm947622.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \
arch/arm/boot/dts/bcm47622.dtsi new file +126 -0
126 lines not on this page · raw message
arch/arm/boot/dts/bcm947622.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +};
Signature · 1 line
2.17.1
Florian Fainelli
AppliedRe: [PATCH v2 3/5] ARM: dts: add dts files for bcmbca soc 47622
Quoted 6 lines · William Zhang
Add dts for ARMv7 based broadband SoC BCM47622.
bcm47622.dtsiis the SoC description dts header andbcm947622.dtsis a simple dts file for Broadcom BCM947622 Reference board that only enable the UART port.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian
William Zhang
maintainerPATCH v2 4/5 MAINTAINERS: update MAINTAINERS file
In reply to William ZhangAdd maintainers, SCM tree, files and directories for the new BCMBCA arch. Only add 47622 for this change and will update in the future when more SoCs are supported.
---
Changes for V2:
* Change Broadcom internal list from maintainer to reviewer
MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
MAINTAINERS +14 -0
@@ -3740,6 +3740,20 @@ F: drivers/net/dsa/bcm_sf2* F: include/linux/dsa/brcm.h F: include/linux/platform_data/b53.h +BROADCOM BCMBCA ARM ARCHITECTURE +M: William Zhang <[email protected]> +M: Anand Gore <[email protected]> +M: Kursad Oney <[email protected]> +R: Broadcom Kernel Team <[email protected]> +L: [email protected] (moderated for non-subscribers) +S: Maintained +T: git git://github.com/broadcom/stblinux.git +F: Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml +F: arch/arm/boot/dts/bcm47622.dtsi +F: arch/arm/boot/dts/bcm947622.dts +N: bcmbca +N: bcm[9]?47622 + BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE M: Nicolas Saenz Julienne <[email protected]> L: [email protected]
Signature · 1 line
2.17.1
Florian Fainelli
AppliedRe: [PATCH v2 4/5] MAINTAINERS: update MAINTAINERS file
Quoted 6 lines · William Zhang
Add maintainers, SCM tree, files and directories for the new BCMBCA arch. Only add 47622 for this change and will update in the future when more SoCs are supported.
Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/maintainers/next, thanks!
Signature · 6 lines
Florian _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
William Zhang
maintainerPATCH v2 5/5 ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
In reply to William ZhangEnable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be used to build a basic kernel for BCM47622 booting to console.
---
arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_53573=y CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y +CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y
Signature · 1 line
2.17.1
Florian Fainelli
AppliedRe: [PATCH v2 5/5] ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
Quoted 6 lines · William Zhang
Enable
CONFIG_ARCH_BCMBCAinmulti_v7_defconfig. This config can be used to build a basic kernel for BCM47622 booting to console.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/defconfig/next, thanks! --
Florian
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel