Skip to contentSkip to conversation

configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO

PATCH New Ian Ray 2 participants 2 messages Apr 14, 2022 – Apr 22, 2022

lore
Share & tools
lore

Ian Ray

author
#0 lore raw

PATCH 1/1 configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO

This GPIO is actually an input "Q7_3V3_PCIE_WAKE#_IN" not an output, so remove the misleaading and incorrect definition.

Cc Tim Harvey <[email protected]> (re: pci: imx: use vpcie-supply if defined by device-tree)
---
 include/configs/ge_bx50v3.h | 1 -
 1 file changed, 1 deletion(-)
include/configs/ge_bx50v3.h +0 -1
index 8d467e4..c80a076 100644
@@ -123,6 +123,5 @@
 
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
 
 #endif	/* __GE_BX50V3_CONFIG_H */
Signature · 1 line
2.10.1
#1 lore raw

PATCH 1/1 configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO

Quoted 4 lines

This GPIO is actually an input "Q7_3V3_PCIE_WAKE#_IN" not an output, so remove the misleaading and incorrect definition.

Cc Tim Harvey <[email protected]> (re: pci: imx: use vpcie-supply if defined by device-tree)

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================