Skip to contentSkip to conversation

mmc-utils: Add General command CMD56 read support

PATCH Superseded Bean Huo 1 participant 1 message Apr 17, 2022 MMC, SD and SDIO

lore
Share & tools
lore

Bean Huo

author
#0 lore raw

PATCH v2 1/1 mmc-utils: Add General command CMD56 read support

From: Bean Huo <[email protected]>

We can use GEN_CMD (CMD56) to read a data block with vendor-specific format and meaning, which is very helpful and useful for customers to analyze device health. This patch is to add support for this command.

At the same time, in order to make CMD56 universal, let more users of mmc-utils can benefit from this. We will allow the user to enter [arg] for special commands. Because some eMMC vendors provide an additional set of commands beyond the GEN_CMD (CMD56) definition in the JEDEC specification. These additional commands are implemented using generic CMD56 commands, and they return a wealth of useful information about the state of the NAND device. For these special purposes, the [31:1]stuff bits in the CMD56 argument are used. You can refer to Micron eMMC "TN-FC-32: e·MMC Device Health Report" as an example.

I didn't add data parsing, just print the raw data as it is vendor-specific.

---
 mmc.c      |  8 ++++++++
 mmc.h      |  2 ++
 mmc_cmds.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |  1 +
 4 files changed, 68 insertions(+)
mmc.c +8 -0
index eb2638b12271..6c563879cf1a 100644
@@ -237,6 +237,14 @@ static struct Command commands[] = {
 		"secure-trim1 | secure-trim2 | trim \n",
 	NULL
 	},
+	{ do_general_cmd_read, -1,
+	"gen_cmd read", "<device> [arg]\n"
+		"Send GEN_CMD (CMD56) to read vendor-specific format/meaning data from <device>\n\n"
+		"NOTE!: [arg] is optional and defaults to 0x1. If [arg] is specified, then [arg]\n"
+		"must be a 32-bit hexadecimal number, prefixed with 0x/0X. And bit0 in [arg] must\n"
+		"be 1.",
+	NULL
+	},
 	{ 0, 0, 0, 0 }
 };
 
mmc.h +2 -0
index 25d6864ac76f..b621374a1ed1 100644
@@ -41,6 +41,8 @@
 					      [1] Discard Enable
 					      [0] Identify Write Blocks for
 					      Erase (or TRIM Enable)  R1b */
+#define MMC_GEN_CMD		56   /* adtc  [31:1] stuff bits.
+					      [0]: RD/WR1 R1 */
 
 #define R1_OUT_OF_RANGE         (1 << 31)       /* er, c */
 #define R1_ADDRESS_ERROR        (1 << 30)       /* erx, c */
mmc_cmds.c +57 -0

60 lines not on this page · raw message

mmc_cmds.h +1 -0
index 8331ab2373fd..0f7c0041f753 100644
@@ -46,3 +46,4 @@ int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);
 int do_erase(int nargs, char **argv);
+int do_general_cmd_read(int nargs, char **argv);
Signature · 1 line
2.34.1