arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable
Subsystems (3)
PATCH 1/1 arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable
Most, if not all of the imx8m[mnp] boards enable the SoC clock driver. The CLK_IMX8MQ isn't necessarily required yet, but as the new power domain driver will assume it is present. To simply this, enable the respective clock drivers when a given imx8m SoC is selected. This will also shink the board defconfig files a bit.
arch/arm/mach-imx/imx8m/Kconfig +4 -0
@@ -8,18 +8,22 @@ config IMX8M config IMX8MQ bool select IMX8M + select CLK_IMX8MQ config IMX8MM bool select IMX8M + select CLK_IMX8MM config IMX8MN bool select IMX8M + select CLK_IMX8MN config IMX8MP bool select IMX8M + select CLK_IMX8MP config SYS_SOC default "imx8m"
Signature · 1 line
2.34.1
Hi Adam,
Quoted 6 lines · Adam Ford
Most, if not all of the imx8m[mnp] boards enable the SoC clock driver. The
CLK_IMX8MQisn't necessarily required yet, but as the new power domain driver will assume it is present. To simply this, enable the respective clock drivers when a given imx8m SoC is selected. This will also shink the board defconfig files a bit.
s/shink/shrink
Quoted 2 lines
Suggested-by Marek Vasut <[email protected]>Signed-off-by Adam Ford <[email protected]>
Quoted 8 lines · Adam Ford
Most, if not all of the imx8m[mnp] boards enable the SoC clock driver. The
CLK_IMX8MQisn't necessarily required yet, but as the new power domain driver will assume it is present. To simply this, enable the respective clock drivers when a given imx8m SoC is selected. This will also shink the board defconfig files a bit.Suggested-by Marek Vasut <[email protected]>Signed-off-by Adam Ford <[email protected]>