Skip to contentSkip to conversation

octeontx2-pf: Add support for adaptive interrupt coalescing

PATCH Superseded Suman Ghosh 2 participants 3 messages Apr 18, 2022 – Apr 22, 2022

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 octeontx2-pf: Add support for adaptive interrupt coalescing

Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate.

---
Changes since V1
- No change, resubmitting because V1 did not get picked up in patchworks for some reason.

 .../net/ethernet/marvell/octeontx2/Kconfig    |  1 +
 .../marvell/octeontx2/nic/otx2_common.c       |  5 ---
 .../marvell/octeontx2/nic/otx2_common.h       | 10 +++++
 .../marvell/octeontx2/nic/otx2_ethtool.c      | 43 ++++++++++++++++---
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 22 ++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.c         | 28 ++++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.h         |  1 +
 7 files changed, 99 insertions(+), 11 deletions(-)
drivers/net/ethernet/marvell/octeontx2/Kconfig +1 -0
index 8560f7e463d3..a544733152d8 100644
@@ -30,6 +30,7 @@ config OCTEONTX2_PF
 	tristate "Marvell OcteonTX2 NIC Physical Function driver"
 	select OCTEONTX2_MBOX
 	select NET_DEVLINK
+	select DIMLIB
 	depends on PCI
 	help
 	  This driver supports Marvell's OcteonTX2 Resource Virtualization
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +0 -5
index 033fd79d35b0..c28850d815c2 100644
@@ -103,11 +103,6 @@ void otx2_get_dev_stats(struct otx2_nic *pfvf)
 {
 	struct otx2_dev_stats *dev_stats = &pfvf->hw.dev_stats;
 
-#define OTX2_GET_RX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
-#define OTX2_GET_TX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
-
 	dev_stats->rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
 	dev_stats->rx_drops = OTX2_GET_RX_STATS(RX_DROP);
 	dev_stats->rx_bcast_frames = OTX2_GET_RX_STATS(RX_BCAST);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +10 -0
index d9f4b085b2a4..6abf5c28921f 100644
@@ -16,6 +16,7 @@
 #include <net/pkt_cls.h>
 #include <net/devlink.h>
 #include <linux/time64.h>
+#include <linux/dim.h>
 
 #include <mbox.h>
 #include <npc.h>
@@ -54,6 +55,11 @@ enum arua_mapped_qtypes {
 /* Send skid of 2000 packets required for CQ size of 4K CQEs. */
 #define SEND_CQ_SKID	2000
 
+#define OTX2_GET_RX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
+#define OTX2_GET_TX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
+
 struct otx2_lmt_info {
 	u64 lmt_addr;
 	u16 lmt_id;
@@ -363,6 +369,7 @@ struct otx2_nic {
 #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED	BIT_ULL(13)
 #define OTX2_FLAG_DMACFLTR_SUPPORT		BIT_ULL(14)
 #define OTX2_FLAG_PTP_ONESTEP_SYNC		BIT_ULL(15)
+#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED	BIT_ULL(16)
 	u64			flags;
 	u64			*cq_op_addr;
 
@@ -442,6 +449,9 @@ struct otx2_nic {
 #endif
 	/* qos */
 	struct otx2_qos		qos;
+
+	/* napi event count. It is needed for adaptive irq coalescing */
+	u32 napi_events;
 };
 
 static inline bool is_otx2_lbkvf(struct pci_dev *pdev)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +37 -6

78 lines not on this page · raw message

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +22 -0
index f18c9a9a50d0..94aaafbeb365 100644
@@ -1279,6 +1279,7 @@ static irqreturn_t otx2_cq_intr_handler(int irq, void *cq_irq)
 	otx2_write64(pf, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0));
 
 	/* Schedule NAPI */
+	pf->napi_events++;
 	napi_schedule_irqoff(&cq_poll->napi);
 
 	return IRQ_HANDLED;
@@ -1292,6 +1293,7 @@ static void otx2_disable_napi(struct otx2_nic *pf)
 
 	for (qidx = 0; qidx < pf->hw.cint_cnt; qidx++) {
 		cq_poll = &qset->napi[qidx];
+		cancel_work_sync(&cq_poll->dim.work);
 		napi_disable(&cq_poll->napi);
 		netif_napi_del(&cq_poll->napi);
 	}
@@ -1538,6 +1540,24 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
 	mutex_unlock(&mbox->lock);
 }
 
+static void otx2_dim_work(struct work_struct *w)
+{
+	struct dim_cq_moder cur_moder;
+	struct otx2_cq_poll *cq_poll;
+	struct otx2_nic *pfvf;
+	struct dim *dim;
+
+	dim = container_of(w, struct dim, work);
+	cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
+	cq_poll = container_of(dim, struct otx2_cq_poll, dim);
+	pfvf = (struct otx2_nic *)cq_poll->dev;
+	pfvf->hw.cq_time_wait = (cur_moder.usec > CQ_TIMER_THRESH_MAX) ?
+				CQ_TIMER_THRESH_MAX : cur_moder.usec;
+	pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ?
+				NAPI_POLL_WEIGHT : cur_moder.pkts;
+	dim->state = DIM_START_MEASURE;
+}
+
 int otx2_open(struct net_device *netdev)
 {
 	struct otx2_nic *pf = netdev_priv(netdev);
@@ -1611,6 +1631,8 @@ int otx2_open(struct net_device *netdev)
 					  CINT_INVALID_CQ;
 
 		cq_poll->dev = (void *)pf;
+		cq_poll->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE;
+		INIT_WORK(&cq_poll->dim.work, otx2_dim_work);
 		netif_napi_add(netdev, &cq_poll->napi,
 			       otx2_napi_handler, NAPI_POLL_WEIGHT);
 		napi_enable(&cq_poll->napi);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +28 -0
index 459b94b99ddb..927dd12b4f4e 100644
@@ -512,6 +512,22 @@ static int otx2_tx_napi_handler(struct otx2_nic *pfvf,
 	return 0;
 }
 
+static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll)
+{
+	struct dim_sample dim_sample;
+	u64 rx_frames, rx_bytes;
+
+	rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) +
+			OTX2_GET_RX_STATS(RX_UCAST);
+	rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
+	dim_update_sample(pfvf->napi_events,
+			  rx_frames,
+			  rx_bytes,
+			  &dim_sample);
+
+	net_dim(&cq_poll->dim, dim_sample);
+}
+
 int otx2_napi_handler(struct napi_struct *napi, int budget)
 {
 	struct otx2_cq_queue *rx_cq = NULL;
@@ -549,6 +565,18 @@ int otx2_napi_handler(struct napi_struct *napi, int budget)
 		if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
 			return workdone;
 
+		/* Check for adaptive interrupt coalesce */
+		if (workdone != 0 &&
+		    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+		    OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+			/* Adjust irq coalese using net_dim */
+			otx2_adjust_adaptive_coalese(pfvf, cq_poll);
+
+			/* Update irq coalescing */
+			for (i = 0; i < pfvf->hw.cint_cnt; i++)
+				otx2_config_irq_coalescing(pfvf, i);
+		}
+
 		/* Re-enable interrupts */
 		otx2_write64(pfvf, NIX_LF_CINTX_ENA_W1S(cq_poll->cint_idx),
 			     BIT_ULL(0));
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h +1 -0
index a2ac2b3bdbf5..ed41a68d3ec6 100644
@@ -107,6 +107,7 @@ struct otx2_cq_poll {
 #define CINT_INVALID_CQ		255
 	u8			cint_idx;
 	u8			cq_ids[CQS_PER_CINT];
+	struct dim		dim;
 	struct napi_struct	napi;
 };
 
Signature · 1 line
2.25.1
maintainer
#1 lore raw
Quoted 264 lines · Suman Ghosh

Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate.

---
Changes since V1
- No change, resubmitting because V1 did not get picked up in patchworks for some reason.

 .../net/ethernet/marvell/octeontx2/Kconfig    |  1 +
 .../marvell/octeontx2/nic/otx2_common.c       |  5 ---
 .../marvell/octeontx2/nic/otx2_common.h       | 10 +++++
 .../marvell/octeontx2/nic/otx2_ethtool.c      | 43 ++++++++++++++++---
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 22 ++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.c         | 28 ++++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.h         |  1 +
 7 files changed, 99 insertions(+), 11 deletions(-)
drivers/net/ethernet/marvell/octeontx2/Kconfig +1 -0
index 8560f7e463d3..a544733152d8 100644
@@ -30,6 +30,7 @@ config OCTEONTX2_PF
 	tristate "Marvell OcteonTX2 NIC Physical Function driver"
 	select OCTEONTX2_MBOX
 	select NET_DEVLINK
+	select DIMLIB
 	depends on PCI
 	help
 	  This driver supports Marvell's OcteonTX2 Resource Virtualization
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +0 -5
index 033fd79d35b0..c28850d815c2 100644
@@ -103,11 +103,6 @@ void otx2_get_dev_stats(struct otx2_nic *pfvf)
 {
 	struct otx2_dev_stats *dev_stats = &pfvf->hw.dev_stats;
 
-#define OTX2_GET_RX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
-#define OTX2_GET_TX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
-
 	dev_stats->rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
 	dev_stats->rx_drops = OTX2_GET_RX_STATS(RX_DROP);
 	dev_stats->rx_bcast_frames = OTX2_GET_RX_STATS(RX_BCAST);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +10 -0
index d9f4b085b2a4..6abf5c28921f 100644
@@ -16,6 +16,7 @@
 #include <net/pkt_cls.h>
 #include <net/devlink.h>
 #include <linux/time64.h>
+#include <linux/dim.h>
 
 #include <mbox.h>
 #include <npc.h>
@@ -54,6 +55,11 @@ enum arua_mapped_qtypes {
 /* Send skid of 2000 packets required for CQ size of 4K CQEs. */
 #define SEND_CQ_SKID	2000
 
+#define OTX2_GET_RX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
+#define OTX2_GET_TX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
+
 struct otx2_lmt_info {
 	u64 lmt_addr;
 	u16 lmt_id;
@@ -363,6 +369,7 @@ struct otx2_nic {
 #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED	BIT_ULL(13)
 #define OTX2_FLAG_DMACFLTR_SUPPORT		BIT_ULL(14)
 #define OTX2_FLAG_PTP_ONESTEP_SYNC		BIT_ULL(15)
+#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED	BIT_ULL(16)
 	u64			flags;
 	u64			*cq_op_addr;
 
@@ -442,6 +449,9 @@ struct otx2_nic {
 #endif
 	/* qos */
 	struct otx2_qos		qos;
+
+	/* napi event count. It is needed for adaptive irq coalescing */
+	u32 napi_events;
 };
 
 static inline bool is_otx2_lbkvf(struct pci_dev *pdev)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +37 -6
index 72d0b02da3cc..8ed282991f05 100644
@@ -477,6 +477,14 @@ static int otx2_get_coalesce(struct net_device *netdev,
 	cmd->rx_max_coalesced_frames = hw->cq_ecount_wait;
 	cmd->tx_coalesce_usecs = hw->cq_time_wait;
 	cmd->tx_max_coalesced_frames = hw->cq_ecount_wait;
+	if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+		OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+		cmd->use_adaptive_rx_coalesce = 1;
+		cmd->use_adaptive_tx_coalesce = 1;
+	} else {
+		cmd->use_adaptive_rx_coalesce = 0;
+		cmd->use_adaptive_tx_coalesce = 0;
+	}
 
 	return 0;
 }
@@ -486,10 +494,10 @@ static int otx2_set_coalesce(struct net_device *netdev,
 {
 	struct otx2_nic *pfvf = netdev_priv(netdev);
 	struct otx2_hw *hw = &pfvf->hw;
+	u8 priv_coalesce_status;
 	int qidx;
 
-	if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce ||
-	    ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
+	if (ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
 	    ec->tx_coalesce_usecs_irq || ec->tx_max_coalesced_frames_irq ||
 	    ec->stats_block_coalesce_usecs || ec->pkt_rate_low ||
 	    ec->rx_coalesce_usecs_low || ec->rx_max_coalesced_frames_low ||
@@ -502,6 +510,18 @@ static int otx2_set_coalesce(struct net_device *netdev,
 	if (!ec->rx_max_coalesced_frames || !ec->tx_max_coalesced_frames)
 		return 0;
 
+	/* Check and update coalesce status */
+	if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+	    OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+		priv_coalesce_status = 1;
+		if (!ec->use_adaptive_rx_coalesce || !ec->use_adaptive_tx_coalesce)
+			pfvf->flags &= ~OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+	} else {
+		priv_coalesce_status = 0;
+		if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce)
+			pfvf->flags |= OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+	}
+
 	/* 'cq_time_wait' is 8bit and is in multiple of 100ns,
 	 * so clamp the user given value to the range of 1 to 25usec.
 	 */
@@ -521,13 +541,13 @@ static int otx2_set_coalesce(struct net_device *netdev,
 		hw->cq_time_wait = min_t(u8, ec->rx_coalesce_usecs,
 					 ec->tx_coalesce_usecs);
 
-	/* Max ecount_wait supported is 16bit,
-	 * so clamp the user given value to the range of 1 to 64k.
+	/* Max packet budget per napi is 64,
+	 * so clamp the user given value to the range of 1 to 64.
 	 */
 	ec->rx_max_coalesced_frames = clamp_t(u32, ec->rx_max_coalesced_frames,
-					      1, U16_MAX);
+					      1, NAPI_POLL_WEIGHT);
 	ec->tx_max_coalesced_frames = clamp_t(u32, ec->tx_max_coalesced_frames,
-					      1, U16_MAX);
+					      1, NAPI_POLL_WEIGHT);
 
 	/* Rx and Tx are mapped to same CQ, check which one
 	 * is changed, if both then choose the min.
@@ -540,6 +560,17 @@ static int otx2_set_coalesce(struct net_device *netdev,
 		hw->cq_ecount_wait = min_t(u16, ec->rx_max_coalesced_frames,
 					   ec->tx_max_coalesced_frames);
 
+	/* Reset 'cq_time_wait' and 'cq_ecount_wait' to
+	 * default values if coalesce status changed from
+	 * 'on' to 'off'.
+	 */
+	if (priv_coalesce_status &&
+	    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) !=
+	    OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+		hw->cq_time_wait = CQ_TIMER_THRESH_DEFAULT;
+		hw->cq_ecount_wait = CQ_CQE_THRESH_DEFAULT;
+	}
+
 	if (netif_running(netdev)) {
 		for (qidx = 0; qidx < pfvf->hw.cint_cnt; qidx++)
 			otx2_config_irq_coalescing(pfvf, qidx);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +22 -0
index f18c9a9a50d0..94aaafbeb365 100644
@@ -1279,6 +1279,7 @@ static irqreturn_t otx2_cq_intr_handler(int irq, void *cq_irq)
 	otx2_write64(pf, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0));
 
 	/* Schedule NAPI */
+	pf->napi_events++;
 	napi_schedule_irqoff(&cq_poll->napi);
 
 	return IRQ_HANDLED;
@@ -1292,6 +1293,7 @@ static void otx2_disable_napi(struct otx2_nic *pf)
 
 	for (qidx = 0; qidx < pf->hw.cint_cnt; qidx++) {
 		cq_poll = &qset->napi[qidx];
+		cancel_work_sync(&cq_poll->dim.work);
 		napi_disable(&cq_poll->napi);
 		netif_napi_del(&cq_poll->napi);
 	}
@@ -1538,6 +1540,24 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
 	mutex_unlock(&mbox->lock);
 }
 
+static void otx2_dim_work(struct work_struct *w)
+{
+	struct dim_cq_moder cur_moder;
+	struct otx2_cq_poll *cq_poll;
+	struct otx2_nic *pfvf;
+	struct dim *dim;
+
+	dim = container_of(w, struct dim, work);
+	cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
+	cq_poll = container_of(dim, struct otx2_cq_poll, dim);
+	pfvf = (struct otx2_nic *)cq_poll->dev;
+	pfvf->hw.cq_time_wait = (cur_moder.usec > CQ_TIMER_THRESH_MAX) ?
+				CQ_TIMER_THRESH_MAX : cur_moder.usec;
+	pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ?
+				NAPI_POLL_WEIGHT : cur_moder.pkts;
+	dim->state = DIM_START_MEASURE;
+}
+
 int otx2_open(struct net_device *netdev)
 {
 	struct otx2_nic *pf = netdev_priv(netdev);
@@ -1611,6 +1631,8 @@ int otx2_open(struct net_device *netdev)
 					  CINT_INVALID_CQ;
 
 		cq_poll->dev = (void *)pf;
+		cq_poll->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE;
+		INIT_WORK(&cq_poll->dim.work, otx2_dim_work);
 		netif_napi_add(netdev, &cq_poll->napi,
 			       otx2_napi_handler, NAPI_POLL_WEIGHT);
 		napi_enable(&cq_poll->napi);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +18 -0
index 459b94b99ddb..927dd12b4f4e 100644
@@ -512,6 +512,22 @@ static int otx2_tx_napi_handler(struct otx2_nic *pfvf,
 	return 0;
 }
 
+static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll)
+{
+	struct dim_sample dim_sample;
+	u64 rx_frames, rx_bytes;
+
+	rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) +
+			OTX2_GET_RX_STATS(RX_UCAST);
+	rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
+	dim_update_sample(pfvf->napi_events,
+			  rx_frames,
+			  rx_bytes,
+			  &dim_sample);
+
+	net_dim(&cq_poll->dim, dim_sample);
+}
+
 int otx2_napi_handler(struct napi_struct *napi, int budget)
 {
 	struct otx2_cq_queue *rx_cq = NULL;
@@ -549,6 +565,18 @@ int otx2_napi_handler(struct napi_struct *napi, int budget)
 		if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
 			return workdone;
 
+		/* Check for adaptive interrupt coalesce */
+		if (workdone != 0 &&

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c int otx2_napi_handler(struct napi_struct *napi, int budget) · line 579

Quoted 10 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +10 -0
+		    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+		    OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+			/* Adjust irq coalese using net_dim */
+			otx2_adjust_adaptive_coalese(pfvf, cq_poll);
+
+			/* Update irq coalescing */
+			for (i = 0; i < pfvf->hw.cint_cnt; i++)
+				otx2_config_irq_coalescing(pfvf, i);
+		}
+

Why are you updating the IRQ coalescing parameters for every sample? You probably should to that in void otx2_dim_work(), when dim tells it's the right time to update them.

Thanks,

Paolo

#2 lore raw

Hi Paolo,

Quoted 285 lines

-----Original Message-----
From: Paolo Abeni <[email protected]>
Sent: Thursday, April 21, 2022 6:57 PM
To: Suman Ghosh <[email protected]>; [email protected]; [email protected]; Sunil Kovvuri Goutham <[email protected]>; [email protected]
Subject: Re: [PATCH V2] octeontx2-pf: Add support for adaptive interrupt coalescing

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c static int otx2_get_coalesce(struct net_device

Quoted 97 lines · Suman Ghosh

Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate.

---
Changes since V1
- No change, resubmitting because V1 did not get picked up in patchworks for some reason.

 .../net/ethernet/marvell/octeontx2/Kconfig    |  1 +
 .../marvell/octeontx2/nic/otx2_common.c       |  5 ---
 .../marvell/octeontx2/nic/otx2_common.h       | 10 +++++
 .../marvell/octeontx2/nic/otx2_ethtool.c      | 43 ++++++++++++++++---
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 22 ++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.c         | 28 ++++++++++++
 .../marvell/octeontx2/nic/otx2_txrx.h         |  1 +
 7 files changed, 99 insertions(+), 11 deletions(-)
drivers/net/ethernet/marvell/octeontx2/Kconfig +1 -0
index 8560f7e463d3..a544733152d8 100644
@@ -30,6 +30,7 @@ config OCTEONTX2_PF
 	tristate "Marvell OcteonTX2 NIC Physical Function driver"
 	select OCTEONTX2_MBOX
 	select NET_DEVLINK
+	select DIMLIB
 	depends on PCI
 	help
 	  This driver supports Marvell's OcteonTX2 Resource Virtualization
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +0 -5
index 033fd79d35b0..c28850d815c2 100644
@@ -103,11 +103,6 @@ void otx2_get_dev_stats(struct otx2_nic *pfvf)  {
 	struct otx2_dev_stats *dev_stats = &pfvf->hw.dev_stats;
 
-#define OTX2_GET_RX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
-#define OTX2_GET_TX_STATS(reg) \
-	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
-
 	dev_stats->rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
 	dev_stats->rx_drops = OTX2_GET_RX_STATS(RX_DROP);
 	dev_stats->rx_bcast_frames = OTX2_GET_RX_STATS(RX_BCAST); diff --git

a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index d9f4b085b2a4..6abf5c28921f 100644

drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +10 -0
@@ -16,6 +16,7 @@
 #include <net/pkt_cls.h>
 #include <net/devlink.h>
 #include <linux/time64.h>
+#include <linux/dim.h>
 
 #include <mbox.h>
 #include <npc.h>
@@ -54,6 +55,11 @@ enum arua_mapped_qtypes {
 /* Send skid of 2000 packets required for CQ size of 4K CQEs. */
 #define SEND_CQ_SKID	2000
 
+#define OTX2_GET_RX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_RX_STATX(reg)) #define
+OTX2_GET_TX_STATS(reg) \
+	 otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
+
 struct otx2_lmt_info {
 	u64 lmt_addr;
 	u16 lmt_id;
@@ -363,6 +369,7 @@ struct otx2_nic {
 #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED	BIT_ULL(13)
 #define OTX2_FLAG_DMACFLTR_SUPPORT		BIT_ULL(14)
 #define OTX2_FLAG_PTP_ONESTEP_SYNC		BIT_ULL(15)
+#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED	BIT_ULL(16)
 	u64			flags;
 	u64			*cq_op_addr;
 
@@ -442,6 +449,9 @@ struct otx2_nic {
 #endif
 	/* qos */
 	struct otx2_qos		qos;
+
+	/* napi event count. It is needed for adaptive irq coalescing */
+	u32 napi_events;
 };
 
 static inline bool is_otx2_lbkvf(struct pci_dev *pdev) diff --git

a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c index 72d0b02da3cc..8ed282991f05 100644

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +0 -0
@@ -477,6 +477,14 @@ static int otx2_get_coalesce(struct net_device

*netdev,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c static int otx2_set_coalesce(struct net_device

Quoted 28 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +10 -2
 	cmd->rx_max_coalesced_frames = hw->cq_ecount_wait;
 	cmd->tx_coalesce_usecs = hw->cq_time_wait;
 	cmd->tx_max_coalesced_frames = hw->cq_ecount_wait;
+	if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+		OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+		cmd->use_adaptive_rx_coalesce = 1;
+		cmd->use_adaptive_tx_coalesce = 1;
+	} else {
+		cmd->use_adaptive_rx_coalesce = 0;
+		cmd->use_adaptive_tx_coalesce = 0;
+	}
 
 	return 0;
 }
@@ -486,10 +494,10 @@ static int otx2_set_coalesce(struct net_device
 *netdev,  {
 	struct otx2_nic *pfvf = netdev_priv(netdev);
 	struct otx2_hw *hw = &pfvf->hw;
+	u8 priv_coalesce_status;
 	int qidx;
 
-	if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce ||
-	    ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
+	if (ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
 	    ec->tx_coalesce_usecs_irq || ec->tx_max_coalesced_frames_irq ||
 	    ec->stats_block_coalesce_usecs || ec->pkt_rate_low ||
 	    ec->rx_coalesce_usecs_low || ec->rx_max_coalesced_frames_low ||
@@ -502,6 +510,18 @@ static int otx2_set_coalesce(struct net_device

*netdev,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c static int otx2_set_coalesce(struct net_device

Quoted 20 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +12 -0
 	if (!ec->rx_max_coalesced_frames || !ec->tx_max_coalesced_frames)
 		return 0;
 
+	/* Check and update coalesce status */
+	if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+	    OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+		priv_coalesce_status = 1;
+		if (!ec->use_adaptive_rx_coalesce || !ec-
 use_adaptive_tx_coalesce)
+			pfvf->flags &= ~OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+	} else {
+		priv_coalesce_status = 0;
+		if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce)
+			pfvf->flags |= OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+	}
+
 	/* 'cq_time_wait' is 8bit and is in multiple of 100ns,
 	 * so clamp the user given value to the range of 1 to 25usec.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +0 -0
 	 */
@@ -521,13 +541,13 @@ static int otx2_set_coalesce(struct net_device

*netdev,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c static int otx2_set_coalesce(struct net_device

Quoted 20 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +4 -4
 		hw->cq_time_wait = min_t(u8, ec->rx_coalesce_usecs,
 					 ec->tx_coalesce_usecs);
 
-	/* Max ecount_wait supported is 16bit,
-	 * so clamp the user given value to the range of 1 to 64k.
+	/* Max packet budget per napi is 64,
+	 * so clamp the user given value to the range of 1 to 64.
 	 */
 	ec->rx_max_coalesced_frames = clamp_t(u32, ec-
 rx_max_coalesced_frames,
-					      1, U16_MAX);
+					      1, NAPI_POLL_WEIGHT);
 	ec->tx_max_coalesced_frames = clamp_t(u32, ec-
 tx_max_coalesced_frames,
-					      1, U16_MAX);
+					      1, NAPI_POLL_WEIGHT);
 
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +0 -0
 	/* Rx and Tx are mapped to same CQ, check which one
 	 * is changed, if both then choose the min.
@@ -540,6 +560,17 @@ static int otx2_set_coalesce(struct net_device

*netdev,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c static irqreturn_t otx2_cq_intr_handler(int irq,

Quoted 23 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +11 -0
 		hw->cq_ecount_wait = min_t(u16, ec->rx_max_coalesced_frames,
 					   ec->tx_max_coalesced_frames);
 
+	/* Reset 'cq_time_wait' and 'cq_ecount_wait' to
+	 * default values if coalesce status changed from
+	 * 'on' to 'off'.
+	 */
+	if (priv_coalesce_status &&
+	    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) !=
+	    OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+		hw->cq_time_wait = CQ_TIMER_THRESH_DEFAULT;
+		hw->cq_ecount_wait = CQ_CQE_THRESH_DEFAULT;
+	}
+
 	if (netif_running(netdev)) {
 		for (qidx = 0; qidx < pfvf->hw.cint_cnt; qidx++)
 			otx2_config_irq_coalescing(pfvf, qidx); diff --git

a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index f18c9a9a50d0..94aaafbeb365 100644

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +0 -0
@@ -1279,6 +1279,7 @@ static irqreturn_t otx2_cq_intr_handler(int irq,

void *cq_irq)

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c static void otx2_free_hw_resources(struct otx2_nic

Quoted 17 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +2 -0
 	otx2_write64(pf, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0));
 
 	/* Schedule NAPI */
+	pf->napi_events++;
 	napi_schedule_irqoff(&cq_poll->napi);
 
 	return IRQ_HANDLED;
@@ -1292,6 +1293,7 @@ static void otx2_disable_napi(struct otx2_nic
 *pf)
 
 	for (qidx = 0; qidx < pf->hw.cint_cnt; qidx++) {
 		cq_poll = &qset->napi[qidx];
+		cancel_work_sync(&cq_poll->dim.work);
 		napi_disable(&cq_poll->napi);
 		netif_napi_del(&cq_poll->napi);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +0 -0
 	}
@@ -1538,6 +1540,24 @@ static void otx2_free_hw_resources(struct otx2_nic

*pf)

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c static int otx2_tx_napi_handler(struct otx2_nic

Quoted 37 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +19 -0
 	mutex_unlock(&mbox->lock);
 }
 
+static void otx2_dim_work(struct work_struct *w) {
+	struct dim_cq_moder cur_moder;
+	struct otx2_cq_poll *cq_poll;
+	struct otx2_nic *pfvf;
+	struct dim *dim;
+
+	dim = container_of(w, struct dim, work);
+	cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
+	cq_poll = container_of(dim, struct otx2_cq_poll, dim);
+	pfvf = (struct otx2_nic *)cq_poll->dev;
+	pfvf->hw.cq_time_wait = (cur_moder.usec > CQ_TIMER_THRESH_MAX) ?
+				CQ_TIMER_THRESH_MAX : cur_moder.usec;
+	pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ?
+				NAPI_POLL_WEIGHT : cur_moder.pkts;
+	dim->state = DIM_START_MEASURE;
+}
+
 int otx2_open(struct net_device *netdev)  {
 	struct otx2_nic *pf = netdev_priv(netdev); @@ -1611,6 +1631,8 @@ int
 otx2_open(struct net_device *netdev)
 					  CINT_INVALID_CQ;
 
 		cq_poll->dev = (void *)pf;
+		cq_poll->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE;
+		INIT_WORK(&cq_poll->dim.work, otx2_dim_work);
 		netif_napi_add(netdev, &cq_poll->napi,
 			       otx2_napi_handler, NAPI_POLL_WEIGHT);
 		napi_enable(&cq_poll->napi);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +0 -0
index 459b94b99ddb..927dd12b4f4e 100644
@@ -512,6 +512,22 @@ static int otx2_tx_napi_handler(struct otx2_nic

*pfvf,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c static int otx2_tx_napi_handler(struct otx2_nic *pfvf,

Quoted 9 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +6 -0
 	return 0;
 }
 
+static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf,
+struct otx2_cq_poll *cq_poll) {
+	struct dim_sample dim_sample;
+	u64 rx_frames, rx_bytes;
+
+	rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST)

+

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c int otx2_napi_handler(struct napi_struct *napi, int

Quoted 13 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +10 -0
+			OTX2_GET_RX_STATS(RX_UCAST);
+	rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
+	dim_update_sample(pfvf->napi_events,
+			  rx_frames,
+			  rx_bytes,
+			  &dim_sample);
+
+	net_dim(&cq_poll->dim, dim_sample);
+}
+
 int otx2_napi_handler(struct napi_struct *napi, int budget)  {
 	struct otx2_cq_queue *rx_cq = NULL;
@@ -549,6 +565,18 @@ int otx2_napi_handler(struct napi_struct *napi, int

budget)

Quoted 3 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +0 -0
 		if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
 			return workdone;
 
Quoted 16 lines

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c int otx2_napi_handler(struct napi_struct *napi, int budget) · line 579

Quoted 12 lines
drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +12 -0
+		/* Check for adaptive interrupt coalesce */
+		if (workdone != 0 &&
+		    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+		    OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+			/* Adjust irq coalese using net_dim */
+			otx2_adjust_adaptive_coalese(pfvf, cq_poll);
+
+			/* Update irq coalescing */
+			for (i = 0; i < pfvf->hw.cint_cnt; i++)
+				otx2_config_irq_coalescing(pfvf, i);
+		}
+

Why are you updating the IRQ coalescing parameters for every sample? You probably should to that in void otx2_dim_work(), when dim tells it's the right time to update them.

Otx2_dim_work() is called from dim context. All the existing users of net_dim
is not doing register read/writes from dim context(example: drivers/net/ethernet/amazon/ena/ena_netdev.c). I guess this is to ensure individual user's register read/write should not impact the performance of the dim algorithm.

Regards,
Suman

Quoted 3 lines

Thanks,

Paolo