dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
Subsystems (2)
PATCH v5 1/2 dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
Add DT compatible string for board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC.
To: [email protected]
---
V2: - Expand comment with Verdin SoM note
V3: - Add RB by Fabio
V4: - Add AB by Peng
V5: - Add AB from Rob
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -819,6 +819,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM + - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v5 2/2 arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC.
To: [email protected]
---
V2: - Add dedicated 20 MHz clock representing Xtal on custom carrier board
- Drop all the I2C clock limitation due to errata ERR007805, this is fixed by separate driver patch:
i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
- Drop uart-has-rtscts from uart2, this is in verdin dtsi already
V3: - Drop can@0 gpio-controller property
- Add RB by Fabio
V4: - Drop can@0 status="okay" property too, this is default
- Add RB by Francesco
V5: - Switch usbotg1 mode from gadget to peripheral per binding doc
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-mx8menlo.dts | 321 ++++++++++++++++++ 2 files changed, 322 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts new file +321 -0
321 lines not on this page · raw message
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 17 lines · Marek Vasut
Add DT compatible string for board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo. The board is a compatible replacement for i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs, SD and eMMC.
Acked-by Peng Fan <[email protected]>Acked-by Rob Herring <[email protected]>Reviewed-by Fabio Estevam <[email protected]>Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Francesco Dolcini <[email protected]>Cc Marcel Ziswiler <[email protected]>Cc Peng Fan <[email protected]>Cc Rob Herring <[email protected]>Cc Shawn Guo <[email protected]>Cc NXP Linux Team <[email protected]>
Quoted 1 line
Applied both, thanks!