drm/solomon: Add SSD130x OLED displays SPI support
Subsystems (4)
Javier Martinez Canillas
maintainerv5 cover drm/solomon: Add SSD130x OLED displays SPI support
Hello,
This series adds a ssd130x-spi driver that provides a 4-wire SPI transport support for SSD130x OLED controllers that can be accessed over a SPI bus.
The driver is quite similar to existing ssd130x-i2c driver that is used by I2C controllers, but there is a difference in the protocol used by SSD130x depending on the transport used. The details are in patch #4 description.
Patch #1 just makes the current ssd130x-i2c compatible strings in the DT binding to be deprecated, and add new ones that don't have an "fb-i2c".
Patch #2 extends the DT binding with the properties needed to support SPI.
Patch #3 adds the new compatible strings to the OF device ID table in the ssd130x-i2c DRM driver and deprecate the old ones.
Patch #4 moves the device info for the different SSD130x variants from the ssd130x-i2c transport driver to the ssd130x core driver.
Finally patch #5 adds the ssd130x-spi DRM driver for the OLED controllers that come with a 4-wire SPI interface, instead of an I2C interface.
This is a v5 that addresses the issues pointed out in v4.
Best regards,
Javier
Changes in v5:
- Remove unnecessary blank line added by mistake in v4 (Andy Shevchenko).
- Remove cast by just using u8 *reg instead of void *data (Geert Uytterhoeven).
- Add Geert Uytterhoeven's Reviewed-by tag to patch 5/5.
Changes in v4:
- Add a description for the dc-gpios property for SPI (Geert Uytterhoeven)
- Export ssd13x_variants array using EXPORT_SYMBOL_NS_GPL() (Andy Shevchenko)
- Use MODULE_IMPORT_NS(DRM_SSD130X) in the ssd130x-i2c driver (Andy Shevchenko)
- Use MODULE_IMPORT_NS(DRM_SSD130X) in the ssd130x-spi driver (Andy Shevchenko)
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- Continue enforcing required properties for deprecated strings (Maxime Ripard)
- Add a comment to the properties required for SPI (Geert Uytterhoeven)
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- s/it/they in the commit description (Geert Uytterhoeven)
- Drop unnecessary blank line (Geert Uytterhoeven)
- Export variants array and use &info[ID] in device table (Andy Shevchenko)
- Drop ssd130x_spi_get_dc() helper and open code it (Geert Uytterhoeven)
- Export variants array and use &info[ID] in device table (Andy Shevchenko)
- Add Geert Uytterhoeven's Reviewed-by tag to patches.
Changes in v2:
- Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven)
- Don't add compatible strings with an "-spi" suffix (Geert Uytterhoeven)
- Use the compatible strings that don't have "fb-i2c" (Geert Uytterhoeven).
- Drop ssd13x_variant_to_info() and just use the array index (Neil Armstrong).
- Add the same compatible strings than I2C (Geert Uytterhoeven)
- Add Mark Brown's Acked-by tag to all patches.
Javier Martinez Canillas (5):
dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible strings
dt-bindings: display: ssd1307fb: Extend schema for SPI controllers drm/solomon: Add ssd130x new compatible strings and deprecate old
ones.
drm/solomon: Move device info from ssd130x-i2c to the core driver drm/solomon: Add SSD130x OLED displays SPI support
.../bindings/display/solomon,ssd1307fb.yaml | 86 +++++++-- drivers/gpu/drm/solomon/Kconfig | 9 + drivers/gpu/drm/solomon/Makefile | 1 + drivers/gpu/drm/solomon/ssd130x-i2c.c | 63 +++---- drivers/gpu/drm/solomon/ssd130x-spi.c | 178 ++++++++++++++++++ drivers/gpu/drm/solomon/ssd130x.c | 35 +++- drivers/gpu/drm/solomon/ssd130x.h | 14 ++ 7 files changed, 329 insertions(+), 57 deletions(-) create mode 100644 drivers/gpu/drm/solomon/ssd130x-spi.c
Signature · 1 line
2.35.1
Javier Martinez Canillas
maintainerPATCH v5 1/5 dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible strings
The current compatible strings for SSD130x I2C controllers contain both an "fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver and also that are for devices that can be accessed over an I2C bus.
But a DT is supposed to describe the hardware and not Linux implementation details. So let's deprecate those compatible strings and add new ones that only contain the vendor and device name, without any of these suffixes.
These will just describe the device and can be matched by both I2C and SPI DRM drivers. The required properties should still be enforced for old ones.
While being there, just drop the "sinowealth,sh1106-i2c" compatible string since that was never present in a released Linux version.
---
(no changes since v3)
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- Continue enforcing required properties for deprecated strings (Maxime Ripard)
Changes in v2:
- Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven)
.../bindings/display/solomon,ssd1307fb.yaml | 44 +++++++++++++------ 1 file changed, 31 insertions(+), 13 deletions(-)
Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +31 -13
@@ -12,12 +12,22 @@ maintainers: properties: compatible: - enum: - - sinowealth,sh1106-i2c - - solomon,ssd1305fb-i2c - - solomon,ssd1306fb-i2c - - solomon,ssd1307fb-i2c - - solomon,ssd1309fb-i2c + oneOf: + # Deprecated compatible strings + - items: + - enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + deprecated: true + - items: + - enum: + - sinowealth,sh1106 + - solomon,ssd1305 + - solomon,ssd1306 + - solomon,ssd1307 + - solomon,ssd1309 reg: maxItems: 1
@@ -136,7 +146,7 @@ allOf: properties: compatible: contains: - const: sinowealth,sh1106-i2c + const: sinowealth,sh1106 then: properties: solomon,dclk-div:
@@ -148,7 +158,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1305fb-i2c + enum: + - solomon,ssd1305-i2c + - solomon,ssd1305 then: properties: solomon,dclk-div:
@@ -160,7 +172,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1306fb-i2c + enum: + - solomon,ssd1306-i2c + - solomon,ssd1306 then: properties: solomon,dclk-div:
@@ -172,7 +186,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1307fb-i2c + enum: + - solomon,ssd1307-i2c + - solomon,ssd1307 then: properties: solomon,dclk-div:
@@ -186,7 +202,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1309fb-i2c + enum: + - solomon,ssd1309-i2c + - solomon,ssd1309 then: properties: solomon,dclk-div:
@@ -203,14 +221,14 @@ examples: #size-cells = <0>; ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + compatible = "solomon,ssd1307"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; }; ssd1306: oled@3d { - compatible = "solomon,ssd1306fb-i2c"; + compatible = "solomon,ssd1306"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>;
Signature · 1 line
2.35.1
Rob Herring
maintainerRe: [PATCH v5 1/5] dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible strings
Quoted 25 lines · Javier Martinez Canillas
The current compatible strings for SSD130x I2C controllers contain both an "fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver and also that are for devices that can be accessed over an I2C bus.
But a DT is supposed to describe the hardware and not Linux implementation details. So let's deprecate those compatible strings and add new ones that only contain the vendor and device name, without any of these suffixes.
These will just describe the device and can be matched by both I2C and SPI DRM drivers. The required properties should still be enforced for old ones.
While being there, just drop the "sinowealth,sh1106-i2c" compatible string since that was never present in a released Linux version.
Signed-off-by Javier Martinez Canillas <[email protected]>Acked-by Mark Brown <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>---
(no changes since v3)
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- Continue enforcing required properties for deprecated strings (Maxime Ripard)
Quoted 6 lines
Changes in v2:
- Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven).../bindings/display/solomon,ssd1307fb.yaml | 44 +++++++++++++------ 1 file changed, 31 insertions(+), 13 deletions(-)
Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
Javier Martinez Canillas
maintainerRe: [PATCH v5 1/5] dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible strings
Hello Rob,
Quoted 34 lines · Rob Herring
Quoted 25 lines · Javier Martinez Canillas
The current compatible strings for SSD130x I2C controllers contain both an "fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver and also that are for devices that can be accessed over an I2C bus.
But a DT is supposed to describe the hardware and not Linux implementation details. So let's deprecate those compatible strings and add new ones that only contain the vendor and device name, without any of these suffixes.
These will just describe the device and can be matched by both I2C and SPI DRM drivers. The required properties should still be enforced for old ones.
While being there, just drop the "sinowealth,sh1106-i2c" compatible string since that was never present in a released Linux version.
Signed-off-by Javier Martinez Canillas <[email protected]>Acked-by Mark Brown <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>---
(no changes since v3)
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- Continue enforcing required properties for deprecated strings (Maxime Ripard)Quoted 6 lines
Changes in v2:
- Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven).../bindings/display/solomon,ssd1307fb.yaml | 44 +++++++++++++------ 1 file changed, 31 insertions(+), 13 deletions(-)
Quoted 6 lines
Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
I meant to add your Acked-by but just forget before posting. Sorry about that.
I'll add it myself before pushing.
Signature · 5 lines
Best regards, Javier Martinez Canillas Linux Engineering Red Hat
Javier Martinez Canillas
maintainerPATCH v5 2/5 dt-bindings: display: ssd1307fb: Extend schema for SPI controllers
In reply to Javier Martinez CanillasThe Solomon SSD130x OLED displays can either have an I2C or SPI interface, add to the schema the properties and examples for OLED devices under SPI.
---
(no changes since v4)
Changes in v4:
- Add a description for the dc-gpios property for SPI (Geert Uytterhoeven)
Changes in v3:
- Add a comment to the properties required for SPI (Geert Uytterhoeven)
Changes in v2:
- Don't add compatible strings with an "-spi" suffix (Geert Uytterhoeven)
.../bindings/display/solomon,ssd1307fb.yaml | 42 ++++++++++++++++++- 1 file changed, 40 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +40 -2
@@ -38,9 +38,20 @@ properties: reset-gpios: maxItems: 1 + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + vbat-supply: description: The supply for VBAT + # Only required for SPI + spi-max-frequency: true + solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 default: 16
@@ -220,14 +231,14 @@ examples: #address-cells = <1>; #size-cells = <0>; - ssd1307: oled@3c { + ssd1307_i2c: oled@3c { compatible = "solomon,ssd1307"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; }; - ssd1306: oled@3d { + ssd1306_i2c: oled@3d { compatible = "solomon,ssd1306"; reg = <0x3c>; pwms = <&pwm 4 3000>;
@@ -238,3 +249,30 @@ examples: solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; }; }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_spi: oled@0 { + compatible = "solomon,ssd1307"; + reg = <0x0>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + + ssd1306_spi: oled@1 { + compatible = "solomon,ssd1306"; + reg = <0x1>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + };
Signature · 1 line
2.35.1
Javier Martinez Canillas
maintainerPATCH v5 3/5 drm/solomon: Add ssd130x new compatible strings and deprecate old ones.
In reply to Javier Martinez CanillasThe current compatible strings for SSD130x I2C controllers contain an "fb" and "-i2c" suffixes. These have been deprecated and more correct ones were added, that don't encode a subsystem or bus used to interface the devices.
---
(no changes since v3)
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
Changes in v2:
- Use the compatible strings that don't have "fb-i2c" (Geert Uytterhoeven).
drivers/gpu/drm/solomon/ssd130x-i2c.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/gpu/drm/solomon/ssd130x-i2c.c +18 -1
@@ -88,9 +88,26 @@ static struct ssd130x_deviceinfo ssd130x_ssd1309_deviceinfo = {static const struct of_device_id ssd130x_of_match[] = { { - .compatible ="sinowealth,sh1106-i2c" , + .compatible ="sinowealth,sh1106" , .data = &ssd130x_sh1106_deviceinfo, }, + { + .compatible ="solomon,ssd1305" , + .data = &ssd130x_ssd1305_deviceinfo, + }, + { + .compatible ="solomon,ssd1306" , + .data = &ssd130x_ssd1306_deviceinfo, + }, + { + .compatible ="solomon,ssd1307" , + .data = &ssd130x_ssd1307_deviceinfo, + }, + { + .compatible ="solomon,ssd1309" , + .data = &ssd130x_ssd1309_deviceinfo, + }, +/* Deprecated but kept for backward compatibility */ { .compatible ="solomon,ssd1305fb-i2c" , .data = &ssd130x_ssd1305_deviceinfo,
Signature · 1 line
2.35.1
Javier Martinez Canillas
maintainerPATCH v5 4/5 drm/solomon: Move device info from ssd130x-i2c to the core driver
In reply to Javier Martinez CanillasThese are declared in the ssd130x-i2c transport driver but the information is not I2C specific, and could be used by other SSD130x transport drivers.
Move them to the ssd130x core driver and just set the OF device entries to an ID that could be used to lookup the correct device info from an array.
While being there, also move the SSD130X_DATA and SSD130X_COMMAND control bytes. Since even though they are used by the I2C interface, they could also be useful for other transport protocols such as SPI.
---
Changes in v5:
- Remove unnecessary blank line added by mistake in v4 (Andy Shevchenko).
Changes in v4:
- Export ssd13x_variants array using EXPORT_SYMBOL_NS_GPL() (Andy Shevchenko)
- Use MODULE_IMPORT_NS(DRM_SSD130X) in the ssd130x-i2c driver (Andy Shevchenko)
Changes in v3:
- s/it/they in the commit description (Geert Uytterhoeven)
- Drop unnecessary blank line (Geert Uytterhoeven)
- Export variants array and use &info[ID] in device table (Andy Shevchenko)
Changes in v2:
- Drop ssd13x_variant_to_info() and just use the array index (Neil Armstrong).
drivers/gpu/drm/solomon/ssd130x-i2c.c | 52 ++++++--------------------- drivers/gpu/drm/solomon/ssd130x.c | 35 ++++++++++++++++-- drivers/gpu/drm/solomon/ssd130x.h | 14 ++++++++ 3 files changed, 56 insertions(+), 45 deletions(-)
drivers/gpu/drm/solomon/ssd130x-i2c.c +10 -42
@@ -53,76 +53,43 @@ static void ssd130x_i2c_shutdown(struct i2c_client *client)ssd130x_shutdown (ssd130x); } -static struct ssd130x_deviceinfo ssd130x_sh1106_deviceinfo = { - .default_vcomh =0x40 , - .default_dclk_div =1 , - .default_dclk_frq =5 , - .page_mode_only =1 , -}; - -static struct ssd130x_deviceinfo ssd130x_ssd1305_deviceinfo = { - .default_vcomh =0x34 , - .default_dclk_div =1 , - .default_dclk_frq =7 , -}; - -static struct ssd130x_deviceinfo ssd130x_ssd1306_deviceinfo = { - .default_vcomh =0x20 , - .default_dclk_div =1 , - .default_dclk_frq =8 , - .need_chargepump =1 , -}; - -static struct ssd130x_deviceinfo ssd130x_ssd1307_deviceinfo = { - .default_vcomh =0x20 , - .default_dclk_div =2 , - .default_dclk_frq =12 , - .need_pwm =1 , -}; - -static struct ssd130x_deviceinfo ssd130x_ssd1309_deviceinfo = { - .default_vcomh =0x34 , - .default_dclk_div =1 , - .default_dclk_frq =10 , -}; -static const struct of_device_id ssd130x_of_match[] = { { .compatible ="sinowealth,sh1106" , - .data = &ssd130x_sh1106_deviceinfo, + .data = &ssd130x_variants[SH1106_ID ], }, { .compatible ="solomon,ssd1305" , - .data = &ssd130x_ssd1305_deviceinfo, + .data = &ssd130x_variants[SSD1305_ID ], }, { .compatible ="solomon,ssd1306" , - .data = &ssd130x_ssd1306_deviceinfo, + .data = &ssd130x_variants[SSD1306_ID ], }, { .compatible ="solomon,ssd1307" , - .data = &ssd130x_ssd1307_deviceinfo, + .data = &ssd130x_variants[SSD1307_ID ], }, { .compatible ="solomon,ssd1309" , - .data = &ssd130x_ssd1309_deviceinfo, + .data = &ssd130x_variants[SSD1309_ID ], },/* Deprecated but kept for backward compatibility */ { .compatible ="solomon,ssd1305fb-i2c" , - .data = &ssd130x_ssd1305_deviceinfo, + .data = &ssd130x_variants[SSD1305_ID ], }, { .compatible ="solomon,ssd1306fb-i2c" , - .data = &ssd130x_ssd1306_deviceinfo, + .data = &ssd130x_variants[SSD1306_ID ], }, { .compatible ="solomon,ssd1307fb-i2c" , - .data = &ssd130x_ssd1307_deviceinfo, + .data = &ssd130x_variants[SSD1307_ID ], }, { .compatible ="solomon,ssd1309fb-i2c" , - .data = &ssd130x_ssd1309_deviceinfo, + .data = &ssd130x_variants[SSD1309_ID ], }, {/* sentinel */ } };
@@ -142,3 +109,4 @@ module_i2c_driver(ssd130x_i2c_driver);MODULE_DESCRIPTION (DRIVER_DESC );MODULE_AUTHOR ("Javier Martinez Canillas <[email protected]>" );MODULE_LICENSE ("GPL v2" ); +MODULE_IMPORT_NS (DRM_SSD130X );
drivers/gpu/drm/solomon/ssd130x.c +32 -3
@@ -39,9 +39,6 @@#define DRIVER_MAJOR 1#define DRIVER_MINOR 0 -#define SSD130X_DATA 0x40 -#define SSD130X_COMMAND 0x80 -#define SSD130X_PAGE_COL_START_LOW 0x00#define SSD130X_PAGE_COL_START_HIGH 0x10#define SSD130X_SET_ADDRESS_MODE 0x20
@@ -94,6 +91,38 @@#define MAX_CONTRAST 255 +const struct ssd130x_deviceinfo ssd130x_variants[] = { + [SH1106_ID ] = { + .default_vcomh =0x40 , + .default_dclk_div =1 , + .default_dclk_frq =5 , + .page_mode_only =1 , + }, + [SSD1305_ID ] = { + .default_vcomh =0x34 , + .default_dclk_div =1 , + .default_dclk_frq =7 , + }, + [SSD1306_ID ] = { + .default_vcomh =0x20 , + .default_dclk_div =1 , + .default_dclk_frq =8 , + .need_chargepump =1 , + }, + [SSD1307_ID ] = { + .default_vcomh =0x20 , + .default_dclk_div =2 , + .default_dclk_frq =12 , + .need_pwm =1 , + }, + [SSD1309_ID ] = { + .default_vcomh =0x34 , + .default_dclk_div =1 , + .default_dclk_frq =10 , + } +}; +EXPORT_SYMBOL_NS_GPL (ssd130x_variants,DRM_SSD130X ); +static inline struct ssd130x_device *drm_to_ssd130x (struct drm_device *drm) { return container_of(drm, struct ssd130x_device, drm);
drivers/gpu/drm/solomon/ssd130x.h +14 -0
@@ -18,6 +18,18 @@#include <linux/regmap.h> +#define SSD130X_DATA 0x40 +#define SSD130X_COMMAND 0x80 + +enum ssd130x_variants { +SH1106_ID , +SSD1305_ID , +SSD1306_ID , +SSD1307_ID , +SSD1309_ID , +NR_SSD130X_VARIANTS +}; +struct ssd130x_deviceinfo {u32 default_vcomh;u32 default_dclk_div;
@@ -71,6 +83,8 @@ struct ssd130x_device {u8 page_end; }; +extern const struct ssd130x_deviceinfo ssd130x_variants[]; +struct ssd130x_device *ssd130x_probe (struct device *dev,struct regmap *regmap);int ssd130x_remove (struct ssd130x_device *ssd130x);void ssd130x_shutdown (struct ssd130x_device *ssd130x);
Signature · 1 line
2.35.1
Javier Martinez Canillas
maintainerPATCH v5 5/5 drm/solomon: Add SSD130x OLED displays SPI support
In reply to Javier Martinez CanillasThe ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over SPI.
There is a difference in the communication protocol when using 4-wire SPI instead of I2C. For the latter, a control byte that contains a D/C# field has to be sent. This field tells the controller whether the data has to be written to the command register or to the graphics display data memory.
But for 4-wire SPI that control byte is not used, instead a real D/C# line must be pulled HIGH for commands data and LOW for graphics display data.
For this reason the standard SPI regmap can't be used and a custom .write bus handler is needed.
---
Changes in v5:
- Remove cast by just using u8 *reg instead of void *data (Geert Uytterhoeven).
- Add Geert Uytterhoeven's Reviewed-by tag to patch 5/5.
Changes in v4:
- Use MODULE_IMPORT_NS(DRM_SSD130X) in the ssd130x-spi driver (Andy Shevchenko)
Changes in v3:
- Drop ssd130x_spi_get_dc() helper and open code it (Geert Uytterhoeven)
- Export variants array and use &info[ID] in device table (Andy Shevchenko)
Changes in v2:
- Add the same compatible strings than I2C (Geert Uytterhoeven)
drivers/gpu/drm/solomon/Kconfig | 9 ++ drivers/gpu/drm/solomon/Makefile | 1 + drivers/gpu/drm/solomon/ssd130x-spi.c | 178 ++++++++++++++++++++++++++ 3 files changed, 188 insertions(+) create mode 100644 drivers/gpu/drm/solomon/ssd130x-spi.c
drivers/gpu/drm/solomon/Kconfig +9 -0
@@ -20,3 +20,12 @@ config DRM_SSD130X_I2C I2C bus. If M is selected the module will be called ssd130x-i2c. + +config DRM_SSD130X_SPI + tristate "DRM support for Solomon SSD130X OLED displays (SPI bus)" + depends on DRM_SSD130X && SPI + select REGMAP + help + Say Y here if the SSD130x OLED display is connected via SPI bus. + + If M is selected the module will be called ssd130x-spi.
drivers/gpu/drm/solomon/Makefile +1 -0
@@ -1,2 +1,3 @@ obj-$(CONFIG_DRM_SSD130X) += ssd130x.o obj-$(CONFIG_DRM_SSD130X_I2C) += ssd130x-i2c.o +obj-$(CONFIG_DRM_SSD130X_SPI) += ssd130x-spi.o
drivers/gpu/drm/solomon/ssd130x-spi.c new file +178 -0
178 lines not on this page · raw message
Signature · 1 line
2.35.1
Javier Martinez Canillas
maintainerQuoted 17 lines · Javier Martinez Canillas
Hello,
This series adds a ssd130x-spi driver that provides a 4-wire SPI transport support for SSD130x OLED controllers that can be accessed over a SPI bus.
The driver is quite similar to existing ssd130x-i2c driver that is used by I2C controllers, but there is a difference in the protocol used by SSD130x depending on the transport used. The details are in patch #4 description.
Patch #1 just makes the current ssd130x-i2c compatible strings in the DT binding to be deprecated, and add new ones that don't have an "fb-i2c".
Patch #2 extends the DT binding with the properties needed to support SPI.
Patch #3 adds the new compatible strings to the OF device ID table in the ssd130x-i2c DRM driver and deprecate the old ones.
Quoted 8 lines
Patch #4 moves the device info for the different SSD130x variants from the ssd130x-i2c transport driver to the ssd130x core driver.
Finally patch #5 adds the ssd130x-spi DRM driver for the OLED controllers that come with a 4-wire SPI interface, instead of an I2C interface.
This is a v5 that addresses the issues pointed out in v4.
Pushed this series to drm-misc-next after adding Rob's Reviewed-by tags to patch 1/5 and 2/5, since I missed that in v5. Thanks all!
Signature · 5 lines
Best regards, Javier Martinez Canillas Linux Engineering Red Hat