s390x: CPU Topology
Subsystems (2)
v7 cover s390x: CPU Topology
Hi,
This new spin adds RESET for the CPU Topology. I added Matthew's patch to help compile the source until the migration V2 is in the main tree.
The goal of this series is to implement CPU topology for S390, it improves the preceeding series with the implementation of books and drawers, of non uniform CPU topology and with documentation.
To use these patches, you will need the Linux series version 8. You find it there:
https://lkml.org/lkml/2022/4/20/465
Currently this code is for KVM only, I have no idea if it is interesting to provide a TCG patch. If ever it will be done in another series.
To have a better understanding of the S390x CPU Topology and its implementation in QEMU you can have a look at the documentation in the last patch or follow the introduction here under.
A short introduction
====================
CPU Topology is described in the S390 POP with essentially the description of two instructions:
PTF Perform Topology function used to poll for topology change
and used to set the polarization but this part is not part of this item.
STSI Store System Information and the SYSIB 15.1.x providing the Topology
configuration.
S390 Topology is a 6 levels hierarchical topology with up to 5 level
of containers. The last topology level, specifying the CPU cores.
This patch series only uses the two lower levels sockets and cores.
To get the information on the topology, S390 provides the STSI instruction, which stores a structures providing the list of the containers used in the Machine topology: the SYSIB.
A selector within the STSI instruction allow to chose how many topology levels will be provide in the SYSIB.
Using the Topology List Entries (TLE) provided inside the SYSIB we the Linux kernel is able to compute the information about the cache distance between two cores and can use this information to take scheduling decisions.
The design
==========
1) To be ready for hotplug, I chose an Object oriented design of the topology containers:
- A node is a bridge on the SYSBUS and defines a "node bus"
- A drawer is hotplug on the "node bus"
- A book on the "drawer bus"
- A socket on the "book bus"
- And the CPU Topology List Entry (CPU-TLE)sits on the socket bus. These objects will be enhanced with the cache information when NUMA is implemented.
This also allows for easy retrieval when building the different SYSIB for Store Topology System Information (STSI)
2) Perform Topology Function (PTF) instruction is made available to the guest with a new KVM capability and intercepted in QEMU, allowing the guest to pool for topology changes.
Features
========
- There is no direct match between IDs shown by:
- lscpu (unrelated numbered list),
- SYSIB 15.1.x (topology ID)
- The CPU number, left column of lscpu, is used to reference a CPU by Linux tools
While the CPU address is used by QEMU for hotplug.
- Effect of -smp parsing on the topology with an example:
-smp 9,sockets=4,cores=4,maxcpus=16
We have 4 socket each holding 4 cores so that we have a maximum of 16 CPU, 9 of them are active on boot. (Should be obvious)
# lscpu -e CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION ADDRESS 0 0 0 0 0 0 0:0:0:0 yes yes horizontal 0 1 0 0 0 0 1 1:1:1:1 yes yes horizontal 1 2 0 0 0 0 2 2:2:2:2 yes yes horizontal 2 3 0 0 0 0 3 3:3:3:3 yes yes horizontal 3 4 0 0 0 1 4 4:4:4:4 yes yes horizontal 4 5 0 0 0 1 5 5:5:5:5 yes yes horizontal 5 6 0 0 0 1 6 6:6:6:6 yes yes horizontal 6 7 0 0 0 1 7 7:7:7:7 yes yes horizontal 7 8 0 0 0 2 8 8:8:8:8 yes yes horizontal 8 #
- To plug a new CPU inside the topology one can simply use the CPU address like in:
(qemu) device_add host-s390x-cpu,core-id=12
# lscpu -e CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION ADDRESS 0 0 0 0 0 0 0:0:0:0 yes yes horizontal 0 1 0 0 0 0 1 1:1:1:1 yes yes horizontal 1 2 0 0 0 0 2 2:2:2:2 yes yes horizontal 2 3 0 0 0 0 3 3:3:3:3 yes yes horizontal 3 4 0 0 0 1 4 4:4:4:4 yes yes horizontal 4 5 0 0 0 1 5 5:5:5:5 yes yes horizontal 5 6 0 0 0 1 6 6:6:6:6 yes yes horizontal 6 7 0 0 0 1 7 7:7:7:7 yes yes horizontal 7 8 0 0 0 2 8 8:8:8:8 yes yes horizontal 8 9 - - - - - ::: no yes horizontal 12 # chcpu -e 9 CPU 9 enabled # lscpu -e CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION ADDRESS 0 0 0 0 0 0 0:0:0:0 yes yes horizontal 0 1 0 0 0 0 1 1:1:1:1 yes yes horizontal 1 2 0 0 0 0 2 2:2:2:2 yes yes horizontal 2 3 0 0 0 0 3 3:3:3:3 yes yes horizontal 3 4 0 0 0 1 4 4:4:4:4 yes yes horizontal 4 5 0 0 0 1 5 5:5:5:5 yes yes horizontal 5 6 0 0 0 1 6 6:6:6:6 yes yes horizontal 6 7 0 0 0 1 7 7:7:7:7 yes yes horizontal 7 8 0 0 0 2 8 8:8:8:8 yes yes horizontal 8 9 0 0 0 3 9 9:9:9:9 yes yes horizontal 12 #
It is up to the admin level, Libvirt for example, to pin the righ CPU to the right vCPU, but as we can see without NUMA, chosing separate sockets for CPUs is not easy without hotplug because without information the code will assign the vCPU and fill the sockets one after the other.
Note that this is also the default behavior on the LPAR.
Conclusion
==========
This patch, together with the associated KVM patch allows to provide CPU topology information to the guest.
Currently, only dedicated vCPU and CPU are supported and a NUMA topology can only be handled using CPU hotplug inside the guest.
Regards,
Pierre
Matthew Rosato (1):
vfio: tolerate migration protocol v1 uapi renames
Pierre Morel (12):
Update linux headers
s390x: topology: CPU topology objects and structures
s390x: topology: implementating Store Topology System Information
s390x: topology: Adding books to CPU topology
s390x: topology: Adding books to STSI
s390x: topology: Adding drawers to CPU topology
s390x: topology: Adding drawers to STSI
s390x: topology: implementing numa for the s390x topology
s390x: kvm: topology: interception of PTF instruction
s390x: topology: resetting the Topology-Change-Report
s390x: CPU topology: CPU topology migration
s390x: topology: activating CPU topology
hw/core/machine-smp.c | 48 +- hw/core/machine.c | 22 + hw/s390x/cpu-topology.c | 647 ++++++++++++++++++ hw/s390x/meson.build | 1 + hw/s390x/s390-virtio-ccw.c | 125 +++- hw/vfio/common.c | 2 +- hw/vfio/migration.c | 19 +- include/hw/boards.h | 8 + include/hw/s390x/cpu-topology.h | 99 +++ include/hw/s390x/s390-virtio-ccw.h | 6 + include/hw/s390x/sclp.h | 1 + .../linux/input-event-codes.h | 4 +- .../standard-headers/linux/virtio_config.h | 6 + .../standard-headers/linux/virtio_crypto.h | 82 ++- linux-headers/asm-arm64/kvm.h | 16 + linux-headers/asm-generic/mman-common.h | 2 + linux-headers/asm-mips/mman.h | 2 + linux-headers/asm-s390/kvm.h | 9 + linux-headers/linux/kvm.h | 20 +- linux-headers/linux/psci.h | 4 + linux-headers/linux/userfaultfd.h | 8 +- linux-headers/linux/vfio.h | 406 ++++++----- linux-headers/linux/vhost.h | 7 + qapi/machine.json | 14 +- qemu-options.hx | 6 +- softmmu/vl.c | 6 + target/s390x/cpu-sysemu.c | 7 + target/s390x/cpu.h | 51 ++ target/s390x/cpu_models.c | 1 + target/s390x/cpu_topology.c | 169 +++++ target/s390x/kvm/kvm.c | 96 +++ target/s390x/kvm/kvm_s390x.h | 2 + target/s390x/meson.build | 1 + 33 files changed, 1651 insertions(+), 246 deletions(-) create mode 100644 hw/s390x/cpu-topology.c create mode 100644 include/hw/s390x/cpu-topology.h create mode 100644 target/s390x/cpu_topology.c
Signature · 45 lines
2.27.0 Changelog: - since v6 - Changes on smp args in qemu-options (Daniel) - changed comments in machine.jason (Daniel) - Added reset (Janosch) - since v5 - rebasing on newer QEMU version - reworked most lines above 80 characters. - since v4 - Added drawer and books to topology - Added numa topology - Added documentation - since v3 - Added migration (Thomas) - Separated STSI instruction from KVM to prepare TCG (Thomas) - Take care of endianess to prepare TCG (Thomas) - Added comments on STSI CPU container and PFT instruction (Thomas) - Moved enabling the instructions as the last patch (Thomas)
PATCH v7 1/13 Update linux headers
This is a placeholder that pulls in 5.18-rc3 + unmerged kernel changes required by this item. A proper header sync can be done once the associated kernel code merges.
--- .../linux/input-event-codes.h | 4 +- .../standard-headers/linux/virtio_config.h | 6 + .../standard-headers/linux/virtio_crypto.h | 82 +++- linux-headers/asm-arm64/kvm.h | 16 + linux-headers/asm-generic/mman-common.h | 2 + linux-headers/asm-mips/mman.h | 2 + linux-headers/asm-s390/kvm.h | 9 + linux-headers/linux/kvm.h | 20 +- linux-headers/linux/psci.h | 4 + linux-headers/linux/userfaultfd.h | 8 +- linux-headers/linux/vfio.h | 406 +++++++++--------- linux-headers/linux/vhost.h | 7 + 12 files changed, 347 insertions(+), 219 deletions(-)
include/standard-headers/linux/input-event-codes.h +3 -1
@@ -278,7 +278,8 @@#define KEY_PAUSECD 201#define KEY_PROG3 202#define KEY_PROG4 203 -#define KEY_DASHBOARD 204/* AL Dashboard */ +#define KEY_ALL_APPLICATIONS 204/* AC Desktop Show All Applications */ +#define KEY_DASHBOARD KEY_ALL_APPLICATIONS#define KEY_SUSPEND 205#define KEY_CLOSE 206/* AC Close */ #define KEY_PLAY 207
@@ -612,6 +613,7 @@#define KEY_ASSISTANT 0x247/* AL Context-aware desktop assistant */ #define KEY_KBD_LAYOUT_NEXT 0x248/* AC Next Keyboard Layout Select */ #define KEY_EMOJI_PICKER 0x249/* Show/hide emoji picker (HUTRR101) */ +#define KEY_DICTATE 0x24a/* Start or Stop Voice Dictation Session (HUTRR99) */ #define KEY_BRIGHTNESS_MIN 0x250/* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251/* Set Brightness to Maximum */
include/standard-headers/linux/virtio_config.h +6 -0
@@ -80,6 +80,12 @@/* This feature indicates support for the packed virtqueue layout. */ #define VIRTIO_F_RING_PACKED 34 +/* +* Inorder feature indicates that all buffers are used by the device +* in the same order in which they have been made available. +*/ +#define VIRTIO_F_IN_ORDER 35 +/* * This feature indicates that memory accesses by the driver and the * device are ordered in a way described by the platform.
include/standard-headers/linux/virtio_crypto.h +81 -1
136 lines not on this page · raw message
linux-headers/asm-arm64/kvm.h +16 -0
@@ -281,6 +281,11 @@ struct kvm_arm_copy_mte_tags {#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 KVM_REG_ARM_FW_REG(3) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED 2 +/* SVE registers */ #define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT)
@@ -362,6 +367,7 @@ struct kvm_arm_copy_mte_tags {#define KVM_ARM_VCPU_PMU_V3_IRQ 0#define KVM_ARM_VCPU_PMU_V3_INIT 1#define KVM_ARM_VCPU_PMU_V3_FILTER 2 +#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3#define KVM_ARM_VCPU_TIMER_CTRL 1#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
@@ -411,6 +417,16 @@ struct kvm_arm_copy_mte_tags {#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED +/* arm64-specific kvm_run::system_event flags */ +/* +* Reset caused by a PSCI v1.1 SYSTEM_RESET2 call. +* Valid only when the system event has a type of KVM_SYSTEM_EVENT_RESET. +*/ +#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (1ULL << 0) + +/* run->fail_entry.hardware_entry_failure_reason codes. */ +#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED (1ULL << 0) +#endif #endif /* __ARM_KVM_H__ */
linux-headers/asm-generic/mman-common.h +2 -0
@@ -75,6 +75,8 @@#define MADV_POPULATE_READ 22/* populate (prefault) page tables readable */ #define MADV_POPULATE_WRITE 23/* populate (prefault) page tables writable */ +#define MADV_DONTNEED_LOCKED 24/* like DONTNEED, but drop locked pages too */ +/* compatibility flags */ #define MAP_FILE 0
linux-headers/asm-mips/mman.h +2 -0
@@ -101,6 +101,8 @@#define MADV_POPULATE_READ 22/* populate (prefault) page tables readable */ #define MADV_POPULATE_WRITE 23/* populate (prefault) page tables writable */ +#define MADV_DONTNEED_LOCKED 24/* like DONTNEED, but drop locked pages too */ +/* compatibility flags */ #define MAP_FILE 0
linux-headers/asm-s390/kvm.h +9 -0
@@ -74,6 +74,7 @@ struct kvm_s390_io_adapter_req {#define KVM_S390_VM_CRYPTO 2#define KVM_S390_VM_CPU_MODEL 3#define KVM_S390_VM_MIGRATION 4 +#define KVM_S390_VM_CPU_TOPOLOGY 5/* kvm attributes for mem_ctrl */ #define KVM_S390_VM_MEM_ENABLE_CMMA 0
@@ -171,6 +172,14 @@ struct kvm_s390_vm_cpu_subfunc {#define KVM_S390_VM_MIGRATION_START 1#define KVM_S390_VM_MIGRATION_STATUS 2 +/* kvm attributes for cpu topology */ +#define KVM_S390_VM_CPU_TOPO_MTR_CLEAR 0 +#define KVM_S390_VM_CPU_TOPO_MTR_SET 1 + +struct kvm_s390_cpu_topology { +__u16 mtcr; +}; +/* for KVM_GET_REGS and KVM_SET_REGS */ struct kvm_regs {/* general purpose regs for s390 */
linux-headers/linux/kvm.h +15 -5
@@ -562,9 +562,12 @@ struct kvm_s390_mem_op {__u32 op;/* type of operation */ __u64 buf;/* buffer in userspace */ union { -__u8 ar;/* the access register number */ +struct { +__u8 ar;/* the access register number */ +__u8 key;/* access key, ignored if flag unset */ + };__u32 sida_offset;/* offset into the sida */ -__u8 reserved[32 ];/* should be set to 0 */ +__u8 reserved[32 ];/* ignored */ }; };/* types for kvm_s390_mem_op->op */
@@ -572,9 +575,12 @@ struct kvm_s390_mem_op {#define KVM_S390_MEMOP_LOGICAL_WRITE 1#define KVM_S390_MEMOP_SIDA_READ 2#define KVM_S390_MEMOP_SIDA_WRITE 3 +#define KVM_S390_MEMOP_ABSOLUTE_READ 4 +#define KVM_S390_MEMOP_ABSOLUTE_WRITE 5/* flags for kvm_s390_mem_op->flags */ #define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0)#define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1) +#define KVM_S390_MEMOP_F_SKEY_PROTECTION (1ULL << 2)/* for KVM_INTERRUPT */ struct kvm_interrupt {
@@ -1134,6 +1140,11 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_VM_GPA_BITS 207#define KVM_CAP_XSAVE2 208#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 +#define KVM_CAP_S390_MEM_OP_EXTENSION 211 +#define KVM_CAP_PMU_CAPABILITY 212 +#define KVM_CAP_DISABLE_QUIRKS2 213 +#define KVM_CAP_S390_CPU_TOPOLOGY 214#ifdef KVM_CAP_IRQ_ROUTING
@@ -1624,9 +1635,6 @@ struct kvm_enc_region {#define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3)#define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4) -/* Available with KVM_CAP_XSAVE2 */ -#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) -struct kvm_s390_pv_sec_parm {__u64 origin;__u64 length;
@@ -1973,6 +1981,8 @@ struct kvm_dirty_gfn {#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) +#define KVM_PMU_CAP_DISABLE (1 << 0) +/** * struct kvm_stats_header - Header of per vm/vcpu binary statistics data. * @flags: Some extra information for header, always 0 for now.
linux-headers/linux/psci.h +4 -0
@@ -82,6 +82,10 @@#define PSCI_0_2_TOS_UP_NO_MIGRATE 1#define PSCI_0_2_TOS_MP 2 +/* PSCI v1.1 reset type encoding for SYSTEM_RESET2 */ +#define PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET 0 +#define PSCI_1_1_RESET_TYPE_VENDOR_START 0x80000000U +/* PSCI version decoding (independent of PSCI version) */ #define PSCI_VERSION_MAJOR_SHIFT 16#define PSCI_VERSION_MINOR_MASK \
linux-headers/linux/userfaultfd.h +7 -1
@@ -32,7 +32,8 @@ UFFD_FEATURE_SIGBUS | \ UFFD_FEATURE_THREAD_ID | \ UFFD_FEATURE_MINOR_HUGETLBFS | \ - UFFD_FEATURE_MINOR_SHMEM) + UFFD_FEATURE_MINOR_SHMEM | \ + UFFD_FEATURE_EXACT_ADDRESS)#define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \
@@ -189,6 +190,10 @@ struct uffdio_api {* * UFFD_FEATURE_MINOR_SHMEM indicates the same support as * UFFD_FEATURE_MINOR_HUGETLBFS, but for shmem-backed pages instead. +* +* UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page +* faults would be provided and the offset within the page would not be +* masked. */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0)#define UFFD_FEATURE_EVENT_FORK (1<<1)
@@ -201,6 +206,7 @@ struct uffdio_api {#define UFFD_FEATURE_THREAD_ID (1<<8)#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9)#define UFFD_FEATURE_MINOR_SHMEM (1<<10) +#define UFFD_FEATURE_EXACT_ADDRESS (1<<11)__u64 features;__u64 ioctls;
linux-headers/linux/vfio.h +195 -211
433 lines not on this page · raw message
linux-headers/linux/vhost.h +7 -0
@@ -150,4 +150,11 @@/* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) + +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) +#endif
Signature · 1 line
2.27.0
PATCH v7 2/13 vfio: tolerate migration protocol v1 uapi renames
In reply to Pierre MorelFrom: Matthew Rosato <[email protected]>
The v1 uapi is deprecated and will be replaced by v2 at some point; this patch just tolerates the renaming of uapi fields to reflect v1 / deprecated status.
--- hw/vfio/common.c | 2 +- hw/vfio/migration.c | 19 +++++++++++-------- 2 files changed, 12 insertions(+), 9 deletions(-)
hw/vfio/common.c +1 -1
@@ -380,7 +380,7 @@ static bool vfio_devices_all_running_and_saving(VFIOContainer *container)return false; } -if ((migration->device_state &VFIO_DEVICE_STATE_SAVING ) && +if ((migration->device_state &VFIO_DEVICE_STATE_V1_SAVING ) && (migration->device_state &VFIO_DEVICE_STATE_RUNNING )) {continue ; }else {
hw/vfio/migration.c +11 -8
@@ -432,7 +432,7 @@ static int vfio_save_setup(QEMUFile *f, void *opaque) } ret =vfio_migration_set_state (vbasedev,VFIO_DEVICE_STATE_MASK , -VFIO_DEVICE_STATE_SAVING ); +VFIO_DEVICE_STATE_V1_SAVING );if (ret) {error_report ("%s: Failed to set state SAVING" , vbasedev->name);return ret;
@@ -532,7 +532,7 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)int ret; ret =vfio_migration_set_state (vbasedev, ~VFIO_DEVICE_STATE_RUNNING , -VFIO_DEVICE_STATE_SAVING ); +VFIO_DEVICE_STATE_V1_SAVING );if (ret) {error_report ("%s: Failed to set state STOP and SAVING" , vbasedev->name);
@@ -569,7 +569,7 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)return ret; } - ret =vfio_migration_set_state (vbasedev, ~VFIO_DEVICE_STATE_SAVING ,0 ); + ret =vfio_migration_set_state (vbasedev, ~VFIO_DEVICE_STATE_V1_SAVING ,0 );if (ret) {error_report ("%s: Failed to set state STOPPED" , vbasedev->name);return ret;
@@ -730,7 +730,7 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)* start saving data. */ if (state ==RUN_STATE_SAVE_VM ) { - value =VFIO_DEVICE_STATE_SAVING ; + value =VFIO_DEVICE_STATE_V1_SAVING ; }else { value =0 ; }
@@ -768,8 +768,9 @@ static void vfio_migration_state_notifier(Notifier *notifier, void *data)case MIGRATION_STATUS_FAILED : bytes_transferred =0 ; ret =vfio_migration_set_state (vbasedev, - ~(VFIO_DEVICE_STATE_SAVING |VFIO_DEVICE_STATE_RESUMING ), -VFIO_DEVICE_STATE_RUNNING ); + ~(VFIO_DEVICE_STATE_V1_SAVING | +VFIO_DEVICE_STATE_RESUMING ), +VFIO_DEVICE_STATE_RUNNING );if (ret) {error_report ("%s: Failed to set state RUNNING" , vbasedev->name); }
@@ -864,8 +865,10 @@ int vfio_migration_probe(VFIODevice *vbasedev, Error **errp) goto add_blocker; } - ret =vfio_get_dev_region_info (vbasedev,VFIO_REGION_TYPE_MIGRATION , -VFIO_REGION_SUBTYPE_MIGRATION , &info); + ret =vfio_get_dev_region_info (vbasedev, +VFIO_REGION_TYPE_MIGRATION_DEPRECATED , +VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED , + &info);if (ret) { goto add_blocker; }
Signature · 1 line
2.27.0
PATCH v7 3/13 s390x: topology: CPU topology objects and structures
In reply to Pierre MorelWe use new objects to have a dynamic administration of the CPU topology. The highest level object in this implementation is the s390 book and in this first implementation of CPU topology for S390 we have a single book.
The book is built as a SYSBUS bridge during the CPU initialization. Other objects, sockets and core will be built after the parsing of the QEMU -smp argument.
Every object under this single book will be build dynamically immediately after a CPU has be realized if it is needed. The CPU will fill the sockets once after the other, according to the number of core per socket defined during the smp parsing.
Each CPU inside a socket will be represented by a bit in a 64bit unsigned long. Set on plug and clear on unplug of a CPU.
For the S390 CPU topology, thread and cores are merged into topology cores and the number of topology cores is the multiplication of cores by the numbers of threads.
--- hw/s390x/cpu-topology.c | 361 ++++++++++++++++++++++++++++++++ hw/s390x/meson.build | 1 + hw/s390x/s390-virtio-ccw.c | 4 + include/hw/s390x/cpu-topology.h | 74 +++++++ target/s390x/cpu.h | 47 +++++ 5 files changed, 487 insertions(+) create mode 100644 hw/s390x/cpu-topology.c create mode 100644 include/hw/s390x/cpu-topology.h
hw/s390x/cpu-topology.c new file +361 -0
@@ -0,0 +1,361 @@ +/* +* CPU Topology +* +* Copyright 2021 IBM Corp. +* Author(s): Pierre Morel <[email protected]> + +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/sysbus.h" +#include "hw/s390x/cpu-topology.h" +#include "hw/qdev-properties.h" +#include "hw/boards.h" +#include "qemu/typedefs.h" +#include "target/s390x/cpu.h" +#include "hw/s390x/s390-virtio-ccw.h" + +static S390TopologyCores *s390_create_cores (S390TopologySocket *socket, +int origin) +{ +DeviceState *dev; +S390TopologyCores *cores; +const MachineState *ms =MACHINE (qdev_get_machine ()); + +if (socket->bus->num_children >= (ms->smp.cores * ms->smp.threads)) { +return NULL ; + } + + dev =qdev_new (TYPE_S390_TOPOLOGY_CORES ); +qdev_realize_and_unref (dev, socket->bus, &error_fatal); + + cores =S390_TOPOLOGY_CORES (dev); + cores->origin = origin; + socket->cnt +=1 ; + +return cores; +} + +static S390TopologySocket *s390_create_socket (S390TopologyBook *book,int id) +{ +DeviceState *dev; +S390TopologySocket *socket; +const MachineState *ms =MACHINE (qdev_get_machine ()); + +if (book->bus->num_children >= ms->smp.sockets) { +return NULL ; + } + + dev =qdev_new (TYPE_S390_TOPOLOGY_SOCKET ); +qdev_realize_and_unref (dev, book->bus, &error_fatal); + + socket =S390_TOPOLOGY_SOCKET (dev); + socket->socket_id = id; + book->cnt++; + +return socket; +} + +/* +* s390_get_cores: +* @socket: the socket to search into +* @origin: the origin specified for the S390TopologyCores +* +* returns a pointer to a S390TopologyCores structure within a socket having +* the specified origin. +* First search if the socket is already containing the S390TopologyCores +* structure and if not create one with this origin. +*/ +static S390TopologyCores *s390_get_cores (S390TopologySocket *socket,int origin) +{ +S390TopologyCores *cores; +BusChild *kid; + + QTAILQ_FOREACH(kid, &socket->bus->children, sibling) { + cores =S390_TOPOLOGY_CORES (kid->child); +if (cores->origin == origin) { +return cores; + } + } +return s390_create_cores (socket, origin); +} + +/* +* s390_get_socket: +* @book: The book to search into +* @socket_id: the identifier of the socket to search for +* +* returns a pointer to a S390TopologySocket structure within a book having +* the specified socket_id. +* First search if the book is already containing the S390TopologySocket +* structure and if not create one with this socket_id. +*/ +static S390TopologySocket *s390_get_socket (S390TopologyBook *book, +int socket_id) +{ +S390TopologySocket *socket; +BusChild *kid; + + QTAILQ_FOREACH(kid, &book->bus->children, sibling) { + socket =S390_TOPOLOGY_SOCKET (kid->child); +if (socket->socket_id == socket_id) { +return socket; + } + } +return s390_create_socket (book, socket_id); +} + +/* +* s390_topology_new_cpu: +* @core_id: the core ID is machine wide +* +* We have a single book returned by s390_get_topology(), +* then we build the hierarchy on demand. +* Note that we do not destroy the hierarchy on error creating +* an entry in the topology, we just keep it empty. +* We do not need to worry about not finding a topology level +* entry this would have been caught during smp parsing. +*/ +void s390_topology_new_cpu (int core_id) +{ +const MachineState *ms =MACHINE (qdev_get_machine ()); +S390TopologyBook *book; +S390TopologySocket *socket; +S390TopologyCores *cores; +int cores_per_socket, sock_idx; +int origin, bit; + + book =s390_get_topology (); + + cores_per_socket = ms->smp.max_cpus / ms->smp.sockets; + + sock_idx = (core_id / cores_per_socket); + socket =s390_get_socket (book, sock_idx); + +/* +* At the core level, each CPU is represented by a bit in a 64bit +* unsigned long. Set on plug and clear on unplug of a CPU. +* The firmware assume that all CPU in the core description have the same +* type, polarization and are all dedicated or shared. +* In the case a socket contains CPU with different type, polarization +* or dedication then they will be defined in different CPU containers. +* Currently we assume all CPU are identical and the only reason to have +* several S390TopologyCores inside a socket is to have more than 64 CPUs +* in that case the origin field, representing the offset of the first CPU +* in the CPU container allows to represent up to the maximal number of +* CPU inside several CPU containers inside the socket container. +*/ + origin =64 * (core_id /64 ); + + cores =s390_get_cores (socket, origin); + + bit =63 - (core_id - origin); +set_bit (bit, &cores->mask); + cores->origin = origin; +} + +/* +* Setting the first topology: 1 book, 1 socket +* This is enough for 64 cores if the topology is flat (single socket) +*/ +void s390_topology_setup (MachineState *ms) +{ +DeviceState *dev; + +/* Create BOOK bridge device */ + dev =qdev_new (TYPE_S390_TOPOLOGY_BOOK ); +object_property_add_child (qdev_get_machine (), +TYPE_S390_TOPOLOGY_BOOK ,OBJECT (dev)); +sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); +} + +S390TopologyBook *s390_get_topology (void ) +{ +static S390TopologyBook *book; + +if (!book) { + book =S390_TOPOLOGY_BOOK ( +object_resolve_path (TYPE_S390_TOPOLOGY_BOOK ,NULL )); +assert (book !=NULL ); + } + +return book; +} + +/* --- CORES Definitions --- */ + +static Property s390_topology_cores_properties[] = { +DEFINE_PROP_BOOL ("dedicated" , S390TopologyCores, dedicated, false), +DEFINE_PROP_UINT8 ("polarity" , S390TopologyCores, polarity, +S390_TOPOLOGY_POLARITY_H ), +DEFINE_PROP_UINT8 ("cputype" , S390TopologyCores, cputype, +S390_TOPOLOGY_CPU_TYPE ), +DEFINE_PROP_UINT16 ("origin" , S390TopologyCores, origin,0 ), +DEFINE_PROP_UINT64 ("mask" , S390TopologyCores, mask,0 ), +DEFINE_PROP_UINT8 ("id" , S390TopologyCores, id,0 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static void cpu_cores_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + +device_class_set_props (dc, s390_topology_cores_properties); + hc->unplug = qdev_simple_device_unplug_cb; + dc->bus_type =TYPE_S390_TOPOLOGY_SOCKET_BUS ; + dc->desc ="topology cpu entry" ; +} + +static const TypeInfo cpu_cores_info = { + .name =TYPE_S390_TOPOLOGY_CORES , + .parent =TYPE_DEVICE , + .instance_size =sizeof (S390TopologyCores), + .class_init = cpu_cores_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +/* --- SOCKETS Definitions --- */ +static Property s390_topology_socket_properties[] = { +DEFINE_PROP_UINT8 ("socket_id" , S390TopologySocket, socket_id,0 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static char *socket_bus_get_dev_path (DeviceState *dev) +{ +S390TopologySocket *socket =S390_TOPOLOGY_SOCKET (dev); +DeviceState *book = dev->parent_bus->parent; +char *id =qdev_get_dev_path (book); +char *ret; + +if (id) { + ret =g_strdup_printf ("%s:%02d" , id, socket->socket_id); +g_free (id); + }else { + ret =g_strdup_printf ("_:%02d" , socket->socket_id); + } + +return ret; +} + +static void socket_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = socket_bus_get_dev_path; + k->max_dev =S390_MAX_SOCKETS ; +} + +static const TypeInfo socket_bus_info = { + .name =TYPE_S390_TOPOLOGY_SOCKET_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = socket_bus_class_init, +}; + +static void s390_socket_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologySocket *socket =S390_TOPOLOGY_SOCKET (dev); +BusState *bus; + + bus =qbus_new (TYPE_S390_TOPOLOGY_SOCKET_BUS , dev, +TYPE_S390_TOPOLOGY_SOCKET_BUS ); +qbus_set_hotplug_handler (bus,OBJECT (dev)); + socket->bus = bus; +} + +static void socket_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->bus_type =TYPE_S390_TOPOLOGY_BOOK_BUS ; + dc->realize = s390_socket_device_realize; +device_class_set_props (dc, s390_topology_socket_properties); + dc->desc ="topology socket" ; +} + +static const TypeInfo socket_info = { + .name =TYPE_S390_TOPOLOGY_SOCKET , + .parent =TYPE_DEVICE , + .instance_size =sizeof (S390TopologySocket), + .class_init = socket_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +static char *book_bus_get_dev_path (DeviceState *dev) +{ +return g_strdup_printf ("00" ); +} + +static void book_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = book_bus_get_dev_path; + k->max_dev =S390_MAX_BOOKS ; +} + +static const TypeInfo book_bus_info = { + .name =TYPE_S390_TOPOLOGY_BOOK_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = book_bus_class_init, +}; + +static void s390_book_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologyBook *book =S390_TOPOLOGY_BOOK (dev); +BusState *bus; + + bus =qbus_new (TYPE_S390_TOPOLOGY_BOOK_BUS , dev, +TYPE_S390_TOPOLOGY_BOOK_BUS ); +qbus_set_hotplug_handler (bus,OBJECT (dev)); + book->bus = bus; +} + +static void book_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->realize = s390_book_device_realize; + dc->desc ="topology book" ; +} + +static const TypeInfo book_info = { + .name =TYPE_S390_TOPOLOGY_BOOK , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (S390TopologyBook), + .class_init = book_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +static void topology_register (void ) +{ +type_register_static (&cpu_cores_info); +type_register_static (&socket_bus_info); +type_register_static (&socket_info); +type_register_static (&book_bus_info); +type_register_static (&book_info); +} + +type_init (topology_register);
hw/s390x/meson.build +1 -0
@@ -2,6 +2,7 @@ s390x_ss = ss.source_set() s390x_ss.add(files( 'ap-bridge.c', 'ap-device.c', + 'cpu-topology.c', 'ccw-device.c', 'css-bridge.c', 'css.c',
hw/s390x/s390-virtio-ccw.c +4 -0
@@ -42,6 +42,7 @@#include "sysemu/sysemu.h" #include "hw/s390x/pv.h" #include "migration/blocker.h" +#include "hw/s390x/cpu-topology.h" static Error *pv_mig_blocker;
@@ -88,6 +89,7 @@ static void s390_init_cpus(MachineState *machine)/* initialize possible_cpus */ mc->possible_cpu_arch_ids (machine); +s390_topology_setup (machine);for (i =0 ; i < machine->smp.cpus; i++) {s390x_new_cpu (machine->cpu_type, i, &error_fatal); }
@@ -305,6 +307,8 @@ static void s390_cpu_plug(HotplugHandler *hotplug_dev,g_assert (!ms->possible_cpus->cpus[cpu->env.core_id].cpu); ms->possible_cpus->cpus[cpu->env.core_id].cpu =OBJECT (dev); +s390_topology_new_cpu (cpu->env.core_id); +if (dev->hotplugged) {raise_irq_cpu_hotplug (); }
include/hw/s390x/cpu-topology.h new file +74 -0
74 lines not on this page · raw message
target/s390x/cpu.h +47 -0
53 lines not on this page · raw message
Signature · 1 line
2.27.0
Re: [PATCH v7 03/13] s390x: topology: CPU topology objects and structures
Quoted 37 lines · Pierre Morel
We use new objects to have a dynamic administration of the CPU topology. The highest level object in this implementation is the s390 book and in this first implementation of CPU topology for S390 we have a single book.
The book is built as a SYSBUS bridge during the CPU initialization. Other objects, sockets and core will be built after the parsing of the QEMU -smp argument.Every object under this single book will be build dynamically immediately after a CPU has be realized if it is needed. The CPU will fill the sockets once after the other, according to the number of core per socket defined during the smp parsing.
Each CPU inside a socket will be represented by a bit in a 64bit unsigned long. Set on plug and clear on unplug of a CPU.
For the S390 CPU topology, thread and cores are merged into topology cores and the number of topology cores is the multiplication of cores by the numbers of threads.
Signed-off-by Pierre Morel <[email protected]>--- hw/s390x/cpu-topology.c | 361 ++++++++++++++++++++++++++++++++ hw/s390x/meson.build | 1 + hw/s390x/s390-virtio-ccw.c | 4 + include/hw/s390x/cpu-topology.h | 74 +++++++ target/s390x/cpu.h | 47 +++++ 5 files changed, 487 insertions(+)create mode 100644
hw/s390x/cpu-topology.ccreate mode 100644include/hw/s390x/cpu-topology.hhw/s390x/cpu-topology.c new file +0
-0
hw/s390x/cpu-topology.c line 4
Quoted 4 lines
hw/s390x/cpu-topology.c new file +4
-0@@ -0,0 +1,361 @@ +/* +* CPU Topology +* +* Copyright 2021 IBM Corp.
2022 now?
Quoted 16 lines
hw/s390x/cpu-topology.c new file +16
-0+* Author(s): Pierre Morel <[email protected]> + +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/sysbus.h" +#include "hw/s390x/cpu-topology.h" +#include "hw/qdev-properties.h" +#include "hw/boards.h" +#include "qemu/typedefs.h" +#include "target/s390x/cpu.h"
hw/s390x/cpu-topology.c line 30
Quoted 10 lines
hw/s390x/cpu-topology.c new file +10
-0+#include "hw/s390x/s390-virtio-ccw.h" + +static S390TopologyCores *s390_create_cores (S390TopologySocket *socket, +int origin) +{ +DeviceState *dev; +S390TopologyCores *cores; +const MachineState *ms =MACHINE (qdev_get_machine ()); + +if (socket->bus->num_children >= (ms->smp.cores * ms->smp.threads)) {
You can drop the innermost parentheses.
Also, can this situation ever happen? If not, please turn it into an assert() instead.
hw/s390x/cpu-topology.c line 31
Quoted 1 line
hw/s390x/cpu-topology.c new file +1
-0+return NULL ;
You return NULL here, but the callers don't check for NULL and use the pointer anyway. So either this should not return NULL or you have to check the value at the calling site.
Quoted 7 lines
hw/s390x/cpu-topology.c new file +7
-0+ } + + dev =qdev_new (TYPE_S390_TOPOLOGY_CORES ); +qdev_realize_and_unref (dev, socket->bus, &error_fatal); + + cores =S390_TOPOLOGY_CORES (dev); + cores->origin = origin;
hw/s390x/cpu-topology.c line 48
Quoted 10 lines
hw/s390x/cpu-topology.c new file +10
-0+ socket->cnt +=1 ; + +return cores; +} + +static S390TopologySocket *s390_create_socket (S390TopologyBook *book,int id) +{ +DeviceState *dev; +S390TopologySocket *socket; +const MachineState *ms =MACHINE (qdev_get_machine ());
You already look up the MachineState pointer in s390_topology_new_cpu() ... so to optimize a little bit, you could pass it in as parameter here instead.
hw/s390x/cpu-topology.c line 51
Quoted 2 lines
hw/s390x/cpu-topology.c new file +2
-0+if (book->bus->num_children >= ms->smp.sockets) { +return NULL ;
Here again - the callers do not check for NULL pointer values, so this should either not return NULL or the callers need to be changed.
Quoted 240 lines
hw/s390x/cpu-topology.c new file +240
-0+ } + + dev =qdev_new (TYPE_S390_TOPOLOGY_SOCKET ); +qdev_realize_and_unref (dev, book->bus, &error_fatal); + + socket =S390_TOPOLOGY_SOCKET (dev); + socket->socket_id = id; + book->cnt++; + +return socket; +} + +/* +* s390_get_cores: +* @socket: the socket to search into +* @origin: the origin specified for the S390TopologyCores +* +* returns a pointer to a S390TopologyCores structure within a socket having +* the specified origin. +* First search if the socket is already containing the S390TopologyCores +* structure and if not create one with this origin. +*/ +static S390TopologyCores *s390_get_cores (S390TopologySocket *socket,int origin) +{ +S390TopologyCores *cores; +BusChild *kid; + + QTAILQ_FOREACH(kid, &socket->bus->children, sibling) { + cores =S390_TOPOLOGY_CORES (kid->child); +if (cores->origin == origin) { +return cores; + } + } +return s390_create_cores (socket, origin); +} + +/* +* s390_get_socket: +* @book: The book to search into +* @socket_id: the identifier of the socket to search for +* +* returns a pointer to a S390TopologySocket structure within a book having +* the specified socket_id. +* First search if the book is already containing the S390TopologySocket +* structure and if not create one with this socket_id. +*/ +static S390TopologySocket *s390_get_socket (S390TopologyBook *book, +int socket_id) +{ +S390TopologySocket *socket; +BusChild *kid; + + QTAILQ_FOREACH(kid, &book->bus->children, sibling) { + socket =S390_TOPOLOGY_SOCKET (kid->child); +if (socket->socket_id == socket_id) { +return socket; + } + } +return s390_create_socket (book, socket_id); +} + +/* +* s390_topology_new_cpu: +* @core_id: the core ID is machine wide +* +* We have a single book returned by s390_get_topology(), +* then we build the hierarchy on demand. +* Note that we do not destroy the hierarchy on error creating +* an entry in the topology, we just keep it empty. +* We do not need to worry about not finding a topology level +* entry this would have been caught during smp parsing. +*/ +void s390_topology_new_cpu (int core_id) +{ +const MachineState *ms =MACHINE (qdev_get_machine ()); +S390TopologyBook *book; +S390TopologySocket *socket; +S390TopologyCores *cores; +int cores_per_socket, sock_idx; +int origin, bit; + + book =s390_get_topology (); + + cores_per_socket = ms->smp.max_cpus / ms->smp.sockets; + + sock_idx = (core_id / cores_per_socket); + socket =s390_get_socket (book, sock_idx); + +/* +* At the core level, each CPU is represented by a bit in a 64bit +* unsigned long. Set on plug and clear on unplug of a CPU. +* The firmware assume that all CPU in the core description have the same +* type, polarization and are all dedicated or shared. +* In the case a socket contains CPU with different type, polarization +* or dedication then they will be defined in different CPU containers. +* Currently we assume all CPU are identical and the only reason to have +* several S390TopologyCores inside a socket is to have more than 64 CPUs +* in that case the origin field, representing the offset of the first CPU +* in the CPU container allows to represent up to the maximal number of +* CPU inside several CPU containers inside the socket container. +*/ + origin =64 * (core_id /64 ); + + cores =s390_get_cores (socket, origin); + + bit =63 - (core_id - origin); +set_bit (bit, &cores->mask); + cores->origin = origin; +} + +/* +* Setting the first topology: 1 book, 1 socket +* This is enough for 64 cores if the topology is flat (single socket) +*/ +void s390_topology_setup (MachineState *ms) +{ +DeviceState *dev; + +/* Create BOOK bridge device */ + dev =qdev_new (TYPE_S390_TOPOLOGY_BOOK ); +object_property_add_child (qdev_get_machine (), +TYPE_S390_TOPOLOGY_BOOK ,OBJECT (dev)); +sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); +} + +S390TopologyBook *s390_get_topology (void ) +{ +static S390TopologyBook *book; + +if (!book) { + book =S390_TOPOLOGY_BOOK ( +object_resolve_path (TYPE_S390_TOPOLOGY_BOOK ,NULL )); +assert (book !=NULL ); + } + +return book; +} + +/* --- CORES Definitions --- */ + +static Property s390_topology_cores_properties[] = { +DEFINE_PROP_BOOL ("dedicated" , S390TopologyCores, dedicated, false), +DEFINE_PROP_UINT8 ("polarity" , S390TopologyCores, polarity, +S390_TOPOLOGY_POLARITY_H ), +DEFINE_PROP_UINT8 ("cputype" , S390TopologyCores, cputype, +S390_TOPOLOGY_CPU_TYPE ), +DEFINE_PROP_UINT16 ("origin" , S390TopologyCores, origin,0 ), +DEFINE_PROP_UINT64 ("mask" , S390TopologyCores, mask,0 ), +DEFINE_PROP_UINT8 ("id" , S390TopologyCores, id,0 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static void cpu_cores_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + +device_class_set_props (dc, s390_topology_cores_properties); + hc->unplug = qdev_simple_device_unplug_cb; + dc->bus_type =TYPE_S390_TOPOLOGY_SOCKET_BUS ; + dc->desc ="topology cpu entry" ; +} + +static const TypeInfo cpu_cores_info = { + .name =TYPE_S390_TOPOLOGY_CORES , + .parent =TYPE_DEVICE , + .instance_size =sizeof (S390TopologyCores), + .class_init = cpu_cores_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +/* --- SOCKETS Definitions --- */ +static Property s390_topology_socket_properties[] = { +DEFINE_PROP_UINT8 ("socket_id" , S390TopologySocket, socket_id,0 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static char *socket_bus_get_dev_path (DeviceState *dev) +{ +S390TopologySocket *socket =S390_TOPOLOGY_SOCKET (dev); +DeviceState *book = dev->parent_bus->parent; +char *id =qdev_get_dev_path (book); +char *ret; + +if (id) { + ret =g_strdup_printf ("%s:%02d" , id, socket->socket_id); +g_free (id); + }else { + ret =g_strdup_printf ("_:%02d" , socket->socket_id); + } + +return ret; +} + +static void socket_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = socket_bus_get_dev_path; + k->max_dev =S390_MAX_SOCKETS ; +} + +static const TypeInfo socket_bus_info = { + .name =TYPE_S390_TOPOLOGY_SOCKET_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = socket_bus_class_init, +}; + +static void s390_socket_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologySocket *socket =S390_TOPOLOGY_SOCKET (dev); +BusState *bus; + + bus =qbus_new (TYPE_S390_TOPOLOGY_SOCKET_BUS , dev, +TYPE_S390_TOPOLOGY_SOCKET_BUS ); +qbus_set_hotplug_handler (bus,OBJECT (dev)); + socket->bus = bus; +} + +static void socket_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->bus_type =TYPE_S390_TOPOLOGY_BOOK_BUS ; + dc->realize = s390_socket_device_realize; +device_class_set_props (dc, s390_topology_socket_properties); + dc->desc ="topology socket" ; +} + +static const TypeInfo socket_info = { + .name =TYPE_S390_TOPOLOGY_SOCKET , + .parent =TYPE_DEVICE , + .instance_size =sizeof (S390TopologySocket),
hw/s390x/cpu-topology.c line 301
Quoted 10 lines
hw/s390x/cpu-topology.c new file +10
-0+ .class_init = socket_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +static char *book_bus_get_dev_path (DeviceState *dev) +{ +return g_strdup_printf ("00" );
If you just want to duplicate a static string, please g_strdup() instead.
Quoted 93 lines
hw/s390x/cpu-topology.c new file +60
-0+} + +static void book_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = book_bus_get_dev_path; + k->max_dev =S390_MAX_BOOKS ; +} + +static const TypeInfo book_bus_info = { + .name =TYPE_S390_TOPOLOGY_BOOK_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = book_bus_class_init, +}; + +static void s390_book_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologyBook *book =S390_TOPOLOGY_BOOK (dev); +BusState *bus; + + bus =qbus_new (TYPE_S390_TOPOLOGY_BOOK_BUS , dev, +TYPE_S390_TOPOLOGY_BOOK_BUS ); +qbus_set_hotplug_handler (bus,OBJECT (dev)); + book->bus = bus; +} + +static void book_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->realize = s390_book_device_realize; + dc->desc ="topology book" ; +} + +static const TypeInfo book_info = { + .name =TYPE_S390_TOPOLOGY_BOOK , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (S390TopologyBook), + .class_init = book_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +static void topology_register (void ) +{ +type_register_static (&cpu_cores_info); +type_register_static (&socket_bus_info); +type_register_static (&socket_info); +type_register_static (&book_bus_info); +type_register_static (&book_info); +} + +type_init (topology_register);hw/s390x/meson.build +1
-0@@ -2,6 +2,7 @@ s390x_ss = ss.source_set() s390x_ss.add(files( 'ap-bridge.c', 'ap-device.c', + 'cpu-topology.c', 'ccw-device.c', 'css-bridge.c', 'css.c',hw/s390x/s390-virtio-ccw.c +2
-0@@ -42,6 +42,7 @@#include "sysemu/sysemu.h" #include "hw/s390x/pv.h" #include "migration/blocker.h" +#include "hw/s390x/cpu-topology.h" static Error *pv_mig_blocker;@@ -88,6 +89,7 @@ static void s390_init_cpus(MachineState *machine)/* initialize possible_cpus */ mc->possible_cpu_arch_ids (machine); +s390_topology_setup (machine);for (i =0 ; i < machine->smp.cpus; i++) {s390x_new_cpu (machine->cpu_type, i, &error_fatal); }
hw/s390x/s390-virtio-ccw.c static void s390_cpu_plug(HotplugHandler *hotplug_dev, · line 310
Quoted 4 lines
hw/s390x/s390-virtio-ccw.c +1
-0@@ -305,6 +307,8 @@ static void s390_cpu_plug(HotplugHandler *hotplug_dev,g_assert (!ms->possible_cpus->cpus[cpu->env.core_id].cpu); ms->possible_cpus->cpus[cpu->env.core_id].cpu =OBJECT (dev); +s390_topology_new_cpu (cpu->env.core_id);
Why not pass the "ms" MachineState value to s390_topology_new_cpu() here, so you don't have to look it up there again?
include/hw/s390x/cpu-topology.h line 4
Quoted 13 lines
hw/s390x/s390-virtio-ccw.c +0
-0if (dev->hotplugged) {raise_irq_cpu_hotplug (); }include/hw/s390x/cpu-topology.h new file +4
-0@@ -0,0 +1,74 @@ +/* +* CPU Topology +* +* Copyright 2021 IBM Corp.
2022 now?
Quoted 22 lines
include/hw/s390x/cpu-topology.h new file +22
-0+* +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/ +#ifndef HW_S390X_CPU_TOPOLOGY_H +#define HW_S390X_CPU_TOPOLOGY_H + +#include "hw/qdev-core.h" +#include "qom/object.h" + +#define S390_TOPOLOGY_CPU_TYPE 0x03 + +#define S390_TOPOLOGY_POLARITY_H 0x00 +#define S390_TOPOLOGY_POLARITY_VL 0x01 +#define S390_TOPOLOGY_POLARITY_VM 0x02 +#define S390_TOPOLOGY_POLARITY_VH 0x03 + +#define TYPE_S390_TOPOLOGY_CORES "topology cores" +/* +* Each CPU inside a socket will be represented by a bit in a 64bit +* unsigned long. Set on plug and clear on unplug of a CPU.
include/hw/s390x/cpu-topology.h line 36
Quoted 10 lines
include/hw/s390x/cpu-topology.h new file +10
-0+* All CPU inside a mask share the same dedicated, polarity and +* cputype values. +* The origin is the offset of the first CPU in a mask. +*/ +struct S390TopologyCores { +DeviceState parent_obj; +uint8_t id; +bool dedicated; +uint8_t polarity; +uint8_t cputype;
What's the benefit of using uint8_ts here? Why not simply an "int"?
include/hw/s390x/cpu-topology.h line 49
Quoted 13 lines
include/hw/s390x/cpu-topology.h new file +13
-0+uint16_t origin; +uint64_t mask; +int cnt; +}; +typedef struct S390TopologyCores S390TopologyCores ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyCores, S390_TOPOLOGY_CORES) + +#define TYPE_S390_TOPOLOGY_SOCKET "topology socket" +#define TYPE_S390_TOPOLOGY_SOCKET_BUS "socket-bus" +struct S390TopologySocket { +DeviceState parent_obj; +BusState *bus; +uint8_t socket_id;
Again, why uint8_t ?
include/hw/s390x/cpu-topology.h line 61
Quoted 12 lines
include/hw/s390x/cpu-topology.h new file +12
-0+int cnt; +}; +typedef struct S390TopologySocket S390TopologySocket ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologySocket, S390_TOPOLOGY_SOCKET) +#define S390_MAX_SOCKETS 4 + +#define TYPE_S390_TOPOLOGY_BOOK "topology book" +#define TYPE_S390_TOPOLOGY_BOOK_BUS "book-bus" +struct S390TopologyBook { +SysBusDevice parent_obj; +BusState *bus; +uint8_t book_id;
dito
include/hw/s390x/cpu-topology.h line 74
Quoted 13 lines
include/hw/s390x/cpu-topology.h new file +13
-0+int cnt; +}; +typedef struct S390TopologyBook S390TopologyBook ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyBook, S390_TOPOLOGY_BOOK) +#define S390_MAX_BOOKS 1 + +S390TopologyBook *s390_init_topology (void ); + +S390TopologyBook *s390_get_topology (void ); +void s390_topology_setup (MachineState *ms); +void s390_topology_new_cpu (int core_id); + +#endif
Thomas
Re: [PATCH v7 03/13] s390x: topology: CPU topology objects and structures
Quoted 32 lines · Thomas Huth
Quoted 31 lines · Pierre Morel
We use new objects to have a dynamic administration of the CPU topology. The highest level object in this implementation is the s390 book and in this first implementation of CPU topology for S390 we have a single book.
The book is built as a SYSBUS bridge during the CPU initialization. Other objects, sockets and core will be built after the parsing of the QEMU -smp argument.Every object under this single book will be build dynamically immediately after a CPU has be realized if it is needed. The CPU will fill the sockets once after the other, according to the number of core per socket defined during the smp parsing.
Each CPU inside a socket will be represented by a bit in a 64bit unsigned long. Set on plug and clear on unplug of a CPU.
For the S390 CPU topology, thread and cores are merged into topology cores and the number of topology cores is the multiplication of cores by the numbers of threads.
Signed-off-by Pierre Morel <[email protected]>---
hw/s390x/cpu-topology.c | 361 ++++++++++++++++++++++++++++++++ hw/s390x/meson.build | 1 + hw/s390x/s390-virtio-ccw.c | 4 +include/hw/s390x/cpu-topology.h| 74 +++++++ target/s390x/cpu.h | 47 +++++5 files changed, 487 insertions(+)create mode 100644
hw/s390x/cpu-topology.ccreate mode 100644include/hw/s390x/cpu-topology.h
Quoted 12 lines
hw/s390x/cpu-topology.c line 4
Quoted 10 lines
hw/s390x/cpu-topology.c new file +4
-0@@ -0,0 +1,361 @@ +/* +* CPU Topology +* +* Copyright 2021 IBM Corp. 2022 now?
as time goes by...
Quoted 23 lines
Quoted 23 lines
hw/s390x/cpu-topology.c new file +3
-0+* Author(s): Pierre Morel <[email protected]> + +* This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */hw/s390x/cpu-topology.c new file +15
-0+ +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/sysbus.h" +#include "hw/s390x/cpu-topology.h" +#include "hw/qdev-properties.h" +#include "hw/boards.h" +#include "qemu/typedefs.h" +#include "target/s390x/cpu.h" +#include "hw/s390x/s390-virtio-ccw.h" + +static S390TopologyCores *s390_create_cores (S390TopologySocket *socket, + int origin) +{
Quoted 8 lines
Quoted 6 lines
+ DeviceState *dev;
+ S390TopologyCores *cores;
+ const MachineState *ms = MACHINE(qdev_get_machine()); +
+ if (socket->bus->num_children>= (ms->smp.cores*ms->smp.threads)) {You can drop the innermost parentheses.
OK
Quoted 5 lines
Also, can this situation ever happen? If not, please turn it into an
assert()instead.Quoted 1 line
Quoted 1 line
+ return NULL;
You return NULL here, but the callers don't check for NULL and use the pointer anyway. So either this should not return NULL or you have to check the value at the calling site.
It can happen, I must check the return value at the caller. Thanks
Quoted 13 lines
Quoted 13 lines
+ }
hw/s390x/cpu-topology.c new file +11
-0+ + dev = qdev_new(TYPE_S390_TOPOLOGY_CORES); + qdev_realize_and_unref(dev, socket->bus, &error_fatal); + + cores = S390_TOPOLOGY_CORES(dev); + cores->origin = origin; + socket->cnt += 1; + + return cores; +} +
Quoted 8 lines
Quoted 6 lines
+static S390TopologySocket *s390_create_socket(S390TopologyBook *book, int id)
+{
+ DeviceState *dev;
+ S390TopologySocket *socket;
+ const MachineState *ms = MACHINE(qdev_get_machine());You already look up the MachineState pointer in
s390_topology_new_cpu()... so to optimize a little bit, you could pass it in as parameter here instead.
Yes, thanks
Quoted 5 lines
Quoted 3 lines
+ if (
book->bus->num_children>=ms->smp.sockets) { + return NULL;Here again - the callers do not check for NULL pointer values, so this should either not return NULL or the callers need to be changed.
hum, should never happen so I will change this with an assert. But searching the answer I found a beautiful bug in the caller.
Quoted 256 lines
Quoted 256 lines
+ }
hw/s390x/cpu-topology.c new file +17
-0+ + dev = qdev_new(TYPE_S390_TOPOLOGY_SOCKET); + qdev_realize_and_unref(dev, book->bus, &error_fatal); + + socket = S390_TOPOLOGY_SOCKET(dev); + socket->socket_id = id; + book->cnt++; + + return socket; +} + +/* +* s390_get_cores: +* @socket: the socket to search into +* @origin: the origin specified for the S390TopologyCores +* +* returns a pointer to a S390TopologyCores structure within a socket having
+ * the specified origin.
+ * First search if the socket is already containing the S390TopologyCores
+ * structure and if not create one with this origin.
+ */
+static S390TopologyCores *s390_get_cores(S390TopologySocket *socket, int origin)hw/s390x/cpu-topology.c new file +19
-0+{ + S390TopologyCores *cores; + BusChild *kid; + + QTAILQ_FOREACH(kid, &socket->bus->children, sibling) { + cores = S390_TOPOLOGY_CORES(kid->child); + if (cores->origin == origin) { + return cores; + } + } + return s390_create_cores(socket, origin); +} + +/* +* s390_get_socket: +* @book: The book to search into +* @socket_id: the identifier of the socket to search for +* +* returns a pointer to a S390TopologySocket structure within a book having
+ * the specifiedsocket_id.
+ * First search if the book is already containing the S390TopologySocket
+ * structure and if not create one with thissocket_id.
+ */hw/s390x/cpu-topology.c new file +46
-0+static S390TopologySocket *s390_get_socket (S390TopologyBook *book, + int socket_id) +{ + S390TopologySocket *socket; + BusChild *kid; + + QTAILQ_FOREACH(kid, &book->bus->children, sibling) { + socket = S390_TOPOLOGY_SOCKET(kid->child); + if (socket->socket_id == socket_id) { + return socket; + } + } + return s390_create_socket(book, socket_id); +} + +/* +* s390_topology_new_cpu: +* @core_id: the core ID is machine wide +* +* We have a single book returned by s390_get_topology(), +* then we build the hierarchy on demand. +* Note that we do not destroy the hierarchy on error creating +* an entry in the topology, we just keep it empty. +* We do not need to worry about not finding a topology level +* entry this would have been caught during smp parsing. +*/ +void s390_topology_new_cpu (int core_id) +{ + const MachineState *ms = MACHINE(qdev_get_machine()); + S390TopologyBook *book; + S390TopologySocket *socket; + S390TopologyCores *cores; + int cores_per_socket, sock_idx; + int origin, bit; + + book = s390_get_topology(); + + cores_per_socket = ms->smp.max_cpus / ms->smp.sockets; + + sock_idx = (core_id / cores_per_socket); + socket = s390_get_socket(book, sock_idx); + + /* +* At the core level, each CPU is represented by a bit in a 64bit +* unsigned long. Set on plug and clear on unplug of a CPU. +* The firmware assume that all CPU in the core description have the same
+ * type, polarization and are all dedicated or shared. + * In the case a socket contains CPU with different type, polarization
+ * or dedication then they will be defined in different CPU containers.
+ * Currently we assume all CPU are identical and the only reason to have
+ * several S390TopologyCores inside a socket is to have more than 64 CPUs
+ * in that case the origin field, representing the offset of the first CPU
+ * in the CPU container allows to represent up to the maximal number of
+ * CPU inside several CPU containers inside the socket container. + */
+ origin = 64 * (core_id/ 64);hw/s390x/cpu-topology.c new file +142
-0+ + cores = s390_get_cores(socket, origin); + + bit = 63 - (core_id - origin); + set_bit(bit, &cores->mask); + cores->origin = origin; +} + +/* +* Setting the first topology: 1 book, 1 socket +* This is enough for 64 cores if the topology is flat (single socket) +*/ +void s390_topology_setup (MachineState *ms) +{ + DeviceState *dev; + + /* Create BOOK bridge device */ + dev = qdev_new(TYPE_S390_TOPOLOGY_BOOK); + object_property_add_child(qdev_get_machine(), + TYPE_S390_TOPOLOGY_BOOK, OBJECT(dev)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); +} + +S390TopologyBook *s390_get_topology (void ) +{ + static S390TopologyBook *book; + + if (!book) { + book = S390_TOPOLOGY_BOOK( + object_resolve_path(TYPE_S390_TOPOLOGY_BOOK, NULL)); + assert(book != NULL); + } + + return book; +} + +/* --- CORES Definitions --- */ + +static Property s390_topology_cores_properties[] = { + DEFINE_PROP_BOOL("dedicated", S390TopologyCores, dedicated, false), + DEFINE_PROP_UINT8("polarity", S390TopologyCores, polarity, + S390_TOPOLOGY_POLARITY_H), + DEFINE_PROP_UINT8("cputype", S390TopologyCores, cputype, + S390_TOPOLOGY_CPU_TYPE), + DEFINE_PROP_UINT16("origin", S390TopologyCores, origin, 0), + DEFINE_PROP_UINT64("mask", S390TopologyCores, mask, 0), + DEFINE_PROP_UINT8("id", S390TopologyCores, id, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void cpu_cores_class_init (ObjectClass *oc,void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); + + device_class_set_props(dc, s390_topology_cores_properties); + hc->unplug = qdev_simple_device_unplug_cb; + dc->bus_type = TYPE_S390_TOPOLOGY_SOCKET_BUS; + dc->desc = "topology cpu entry"; +} + +static const TypeInfo cpu_cores_info = { + .name = TYPE_S390_TOPOLOGY_CORES, + .parent = TYPE_DEVICE, + .instance_size = sizeof(S390TopologyCores), + .class_init = cpu_cores_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +/* --- SOCKETS Definitions --- */ +static Property s390_topology_socket_properties[] = { + DEFINE_PROP_UINT8("socket_id", S390TopologySocket, socket_id, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static char *socket_bus_get_dev_path (DeviceState *dev) +{ + S390TopologySocket *socket = S390_TOPOLOGY_SOCKET(dev); + DeviceState *book = dev->parent_bus->parent; + char *id = qdev_get_dev_path(book); + char *ret; + + if (id) { + ret = g_strdup_printf("%s:%02d", id, socket->socket_id); + g_free(id); + } else { + ret = g_strdup_printf("_:%02d", socket->socket_id); + } + + return ret; +} + +static void socket_bus_class_init (ObjectClass *oc,void *data) +{ + BusClass *k = BUS_CLASS(oc); + + k->get_dev_path = socket_bus_get_dev_path; + k->max_dev = S390_MAX_SOCKETS; +} + +static const TypeInfo socket_bus_info = { + .name = TYPE_S390_TOPOLOGY_SOCKET_BUS, + .parent = TYPE_BUS, + .instance_size = 0, + .class_init = socket_bus_class_init, +}; + +static void s390_socket_device_realize (DeviceState *dev,Error **errp) +{ + S390TopologySocket *socket = S390_TOPOLOGY_SOCKET(dev); + BusState *bus; + + bus = qbus_new(TYPE_S390_TOPOLOGY_SOCKET_BUS, dev, + TYPE_S390_TOPOLOGY_SOCKET_BUS); + qbus_set_hotplug_handler(bus, OBJECT(dev)); + socket->bus = bus; +} + +static void socket_class_init (ObjectClass *oc,void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); + + hc->unplug = qdev_simple_device_unplug_cb; + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); + dc->bus_type = TYPE_S390_TOPOLOGY_BOOK_BUS; + dc->realize = s390_socket_device_realize; + device_class_set_props(dc, s390_topology_socket_properties); + dc->desc = "topology socket"; +} + +static const TypeInfo socket_info = { + .name = TYPE_S390_TOPOLOGY_SOCKET, + .parent = TYPE_DEVICE, + .instance_size = sizeof(S390TopologySocket), + .class_init = socket_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_HOTPLUG_HANDLER }, + { }
Quoted 8 lines
hw/s390x/cpu-topology.c line 301
Quoted 6 lines
+ }
hw/s390x/cpu-topology.c new file +5
-0+}; + +static char *book_bus_get_dev_path (DeviceState *dev) +{ + return g_strdup_printf("00");If you just want to duplicate a static string, please
g_strdup()instead.
OK, thanks.
Quoted 89 lines
Quoted 89 lines
hw/s390x/cpu-topology.c new file +60
-0+} + +static void book_bus_class_init (ObjectClass *oc,void *data) +{ + BusClass *k = BUS_CLASS(oc); + + k->get_dev_path = book_bus_get_dev_path; + k->max_dev = S390_MAX_BOOKS; +} + +static const TypeInfo book_bus_info = { + .name = TYPE_S390_TOPOLOGY_BOOK_BUS, + .parent = TYPE_BUS, + .instance_size = 0, + .class_init = book_bus_class_init, +}; + +static void s390_book_device_realize (DeviceState *dev,Error **errp) +{ + S390TopologyBook *book = S390_TOPOLOGY_BOOK(dev); + BusState *bus; + + bus = qbus_new(TYPE_S390_TOPOLOGY_BOOK_BUS, dev, + TYPE_S390_TOPOLOGY_BOOK_BUS); + qbus_set_hotplug_handler(bus, OBJECT(dev)); + book->bus = bus; +} + +static void book_class_init (ObjectClass *oc,void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); + + hc->unplug = qdev_simple_device_unplug_cb; + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); + dc->realize = s390_book_device_realize; + dc->desc = "topology book"; +} + +static const TypeInfo book_info = { + .name = TYPE_S390_TOPOLOGY_BOOK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(S390TopologyBook), + .class_init = book_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_HOTPLUG_HANDLER }, + { } + } +}; + +static void topology_register (void ) +{ + type_register_static(&cpu_cores_info); + type_register_static(&socket_bus_info); + type_register_static(&socket_info); + type_register_static(&book_bus_info); + type_register_static(&book_info); +} + +type_init (topology_register);hw/s390x/meson.build +0
-0@@ -2,6 +2,7 @@ s390x_ss = ss.source_set()s390x_ss.add(files(
'ap-bridge.c',
'ap-device.c',
+ 'cpu-topology.c',
'ccw-device.c',
'css-bridge.c',
'css.c',hw/s390x/s390-virtio-ccw.c +2
-0@@ -42,6 +42,7 @@ #include "sysemu/sysemu.h" #include "hw/s390x/pv.h" #include "migration/blocker.h" +#include "hw/s390x/cpu-topology.h" static Error *pv_mig_blocker;@@ -88,6 +89,7 @@ static void s390_init_cpus(MachineState *machine) /* initialize possible_cpus */ mc->possible_cpu_arch_ids(machine); + s390_topology_setup(machine); for (i = 0; i < machine->smp.cpus; i++) { s390x_new_cpu(machine->cpu_type, i, &error_fatal);
Quoted 8 lines
hw/s390x/s390-virtio-ccw.c static void s390_cpu_plug(HotplugHandler · line 310
Quoted 6 lines
hw/s390x/s390-virtio-ccw.c +1
-0}@@ -305,6 +307,8 @@ static void s390_cpu_plug(HotplugHandler *hotplug_dev, g_assert(!ms->possible_cpus->cpus[cpu->env.core_id].cpu); ms->possible_cpus->cpus[cpu->env.core_id].cpu = OBJECT(dev); + s390_topology_new_cpu(cpu->env.core_id);Why not pass the "ms" MachineState value to
s390_topology_new_cpu()here, so you don't have to look it up there again?
Yes, will do.
Quoted 16 lines
Quoted 10 lines
hw/s390x/s390-virtio-ccw.c +0
-0if (dev->hotplugged) { raise_irq_cpu_hotplug(); }include/hw/s390x/cpu-topology.h new file +0
-0include/hw/s390x/cpu-topology.h line 4
Quoted 4 lines
include/hw/s390x/cpu-topology.h new file +4
-0@@ -0,0 +1,74 @@ +/* +* CPU Topology +* +* Copyright 2021 IBM Corp. 2022 now?
We are not getting younger....
Quoted 28 lines
Quoted 28 lines
include/hw/s390x/cpu-topology.h new file +2
-0+* +* This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */include/hw/s390x/cpu-topology.h new file +21
-0+#ifndef HW_S390X_CPU_TOPOLOGY_H +#define HW_S390X_CPU_TOPOLOGY_H + +#include "hw/qdev-core.h" +#include "qom/object.h" + +#define S390_TOPOLOGY_CPU_TYPE 0x03 + +#define S390_TOPOLOGY_POLARITY_H 0x00 +#define S390_TOPOLOGY_POLARITY_VL 0x01 +#define S390_TOPOLOGY_POLARITY_VM 0x02 +#define S390_TOPOLOGY_POLARITY_VH 0x03 + +#define TYPE_S390_TOPOLOGY_CORES "topology cores" + /* +* Each CPU inside a socket will be represented by a bit in a 64bit +* unsigned long. Set on plug and clear on unplug of a CPU. +* All CPU inside a mask share the same dedicated, polarity and +* cputype values. +* The origin is the offset of the first CPU in a mask. +*/
Quoted 8 lines
Quoted 6 lines
+struct S390TopologyCores {
+ DeviceStateparent_obj;
+uint8_tid;
+ bool dedicated;
+uint8_tpolarity;
+uint8_tcputype;What's the benefit of using
uint8_tshere? Why not simply an "int"?
none, int is OK
Quoted 16 lines
Quoted 4 lines
+
uint16_torigin;
+uint64_tmask;
+ int cnt;include/hw/s390x/cpu-topology.h line 49
Quoted 10 lines
include/hw/s390x/cpu-topology.h new file +10
-0+}; +typedef struct S390TopologyCores S390TopologyCores ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyCores, S390_TOPOLOGY_CORES) + +#define TYPE_S390_TOPOLOGY_SOCKET "topology socket" +#define TYPE_S390_TOPOLOGY_SOCKET_BUS "socket-bus" +struct S390TopologySocket { + DeviceState parent_obj; + BusState *bus; + uint8_t socket_id;Again, why
uint8_t?
OK
Quoted 15 lines
include/hw/s390x/cpu-topology.h line 61
Quoted 13 lines
+ int cnt;
include/hw/s390x/cpu-topology.h new file +11
-0+}; +typedef struct S390TopologySocket S390TopologySocket ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologySocket, S390_TOPOLOGY_SOCKET) +#define S390_MAX_SOCKETS 4 + +#define TYPE_S390_TOPOLOGY_BOOK "topology book" +#define TYPE_S390_TOPOLOGY_BOOK_BUS "book-bus" +struct S390TopologyBook { + SysBusDevice parent_obj; + BusState *bus; + uint8_t book_id;dito
yes, right
Quoted 17 lines
Quoted 4 lines
+ int cnt;
include/hw/s390x/cpu-topology.h new file +2
-0+}; +typedef struct S390TopologyBook S390TopologyBook ;include/hw/s390x/cpu-topology.h line 74
Quoted 10 lines
include/hw/s390x/cpu-topology.h new file +10
-0+OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyBook, S390_TOPOLOGY_BOOK) +#define S390_MAX_BOOKS 1 + +S390TopologyBook *s390_init_topology (void ); + +S390TopologyBook *s390_get_topology (void ); +void s390_topology_setup (MachineState *ms); +void s390_topology_new_cpu (int core_id); + +#endif Thomas
Thanks Thomas for the review,
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 4/13 s390x: topology: implementating Store Topology System Information
In reply to Pierre MorelThe handling of STSI is enhanced with the interception of the function code 15 for storing CPU topology.
Using the objects built during the pluging of CPU, we build the SYSIB 15_1_x structures.
With this patch the maximum MNEST level is 2, this is also the only level allowed and only SYSIB 15_1_2 will be built.
--- hw/s390x/cpu-topology.c | 12 ++-- target/s390x/cpu.h | 1 + target/s390x/cpu_topology.c | 112 ++++++++++++++++++++++++++++++++++++ target/s390x/kvm/kvm.c | 5 ++ target/s390x/meson.build | 1 + 5 files changed, 124 insertions(+), 7 deletions(-) create mode 100644 target/s390x/cpu_topology.c
hw/s390x/cpu-topology.c +5 -7
@@ -127,15 +127,14 @@ void s390_topology_new_cpu(int core_id)S390TopologyBook *book;S390TopologySocket *socket;S390TopologyCores *cores; -int cores_per_socket, sock_idx;int origin, bit; +int nb_cores_per_socket; book =s390_get_topology (); - cores_per_socket = ms->smp.max_cpus / ms->smp.sockets; - - sock_idx = (core_id / cores_per_socket); - socket =s390_get_socket (book, sock_idx); +/* Cores for the S390 topology are cores and threads of the QEMU topology */ + nb_cores_per_socket = ms->smp.cores * ms->smp.threads; + socket =s390_get_socket (book, core_id / nb_cores_per_socket);/* * At the core level, each CPU is represented by a bit in a 64bit
@@ -151,12 +150,11 @@ void s390_topology_new_cpu(int core_id)* CPU inside several CPU containers inside the socket container. */ origin =64 * (core_id /64 ); - cores =s390_get_cores (socket, origin); + cores->origin = origin; bit =63 - (core_id - origin);set_bit (bit, &cores->mask); - cores->origin = origin; }/*
target/s390x/cpu.h +1 -0
@@ -889,4 +889,5 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr);#include "exec/cpu-all.h" +void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar);#endif
target/s390x/cpu_topology.c new file +112 -0
112 lines not on this page · raw message
target/s390x/kvm/kvm.c +5 -0
@@ -52,6 +52,7 @@#include "hw/s390x/s390-virtio-ccw.h" #include "hw/s390x/s390-virtio-hcall.h" #include "hw/s390x/pv.h" +#include "hw/s390x/cpu-topology.h" #ifndef DEBUG_KVM #define DEBUG_KVM 0
@@ -1910,6 +1911,10 @@ static int handle_stsi(S390CPU *cpu)/* Only sysib 3.2.2 needs post-handling for now. */ insert_stsi_3_2_2 (cpu, run->s390_stsi.addr, run->s390_stsi.ar);return 0 ; +case 15 : +insert_stsi_15_1_x (cpu, run->s390_stsi.sel2, run->s390_stsi.addr, + run->s390_stsi.ar); +return 0 ;default :return 0 ; }
target/s390x/meson.build +1 -0
@@ -29,6 +29,7 @@ s390x_softmmu_ss.add(files( 'sigp.c', 'cpu-sysemu.c', 'cpu_models_sysemu.c', + 'cpu_topology.c', )) s390x_user_ss = ss.source_set()
Signature · 1 line
2.27.0
Re: [PATCH v7 04/13] s390x: topology: implementating Store Topology System Information
Quoted 4 lines · Pierre Morel
The handling of STSI is enhanced with the interception of the function code 15 for storing CPU topology.
Using the objects built during the pluging of CPU, we build the
s/pluging/plugging/
Quoted 7 lines
SYSIB 15_1_x structures.
With this patch the maximum MNEST level is 2, this is also the only level allowed and only SYSIB 15_1_2 will be built.
Signed-off-by Pierre Morel <[email protected]>---
...
target/s390x/cpu.h S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); · line 893
Quoted 10 lines
target/s390x/cpu.h +1
-0@@ -889,4 +889,5 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr);#include "exec/cpu-all.h" +void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar);#endif
Please keep an empty line before the #endif
target/s390x/cpu_topology.c line 4
Quoted 10 lines
target/s390x/cpu_topology.c new file +4
-0@@ -0,0 +1,112 @@ +/* +* QEMU S390x CPU Topology +* +* Copyright IBM Corp. 2021
2022 ?
Quoted 6 lines
target/s390x/cpu_topology.c new file +6
-0+* Author(s): Pierre Morel <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/
...
Quoted 16 lines
target/s390x/cpu_topology.c new file +16
-0+void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar) +{ +const MachineState *machine =MACHINE (qdev_get_machine ()); +void *p; +int ret, cc; + +/* +* Until the SCLP STSI Facility reporting the MNEST value is used, +* a sel2 value of 2 is the only value allowed in STSI 15.1.x. +*/ +if (sel2 !=2 ) { +setcc (cpu,3 ); +return ; + } + + p =g_malloc0 (TARGET_PAGE_SIZE );
target/s390x/cpu_topology.c line 109
Quoted 10 lines
target/s390x/cpu_topology.c new file +10
-0+ +setup_stsi (machine, p,2 ); + +if (s390_is_pv ()) { + ret =s390_cpu_pv_mem_write (cpu,0 , p,TARGET_PAGE_SIZE ); + }else { + ret =s390_cpu_virt_mem_write (cpu, addr, ar, p,TARGET_PAGE_SIZE ); + } + cc = ret ?3 :0 ; +setcc (cpu, cc);
Just a matter of taste (i.e. keep it if you like) - but you could scratch the cc variable in this function by just doing:
setcc(cpu, ret ? 3 : 0);
target/s390x/cpu_topology.c line 112
Quoted 3 lines
target/s390x/cpu_topology.c new file +3
-0+g_free (p); +} +
Thomas
Re: [PATCH v7 04/13] s390x: topology: implementating Store Topology System Information
Quoted 16 lines · Thomas Huth
Quoted 4 lines · Pierre Morel
The handling of STSI is enhanced with the interception of the function code 15 for storing CPU topology.
Using the objects built during the pluging of CPU, we build the
s/pluging/plugging/
Quoted 7 lines
SYSIB 15_1_x structures.
With this patch the maximum MNEST level is 2, this is also the only level allowed and only SYSIB 15_1_2 will be built.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 10 lines
target/s390x/cpu.h S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); · line 891
Quoted 8 lines
target/s390x/cpu.h +1
-0@@ -889,4 +889,5 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); #include "exec/cpu-all.h" +void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar); #endifPlease keep an empty line before the #endif
OK
Quoted 13 lines
target/s390x/cpu_topology.c line 4
Quoted 11 lines
target/s390x/cpu_topology.c new file +4
-0@@ -0,0 +1,112 @@ +/* +* QEMU S390x CPU Topology +* +* Copyright IBM Corp. 2021 2022 ?
:) yes
Quoted 39 lines
Quoted 8 lines
target/s390x/cpu_topology.c new file +3
-0+* Author(s): Pierre Morel <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */...
Quoted 23 lines
target/s390x/cpu_topology.c new file +23
-0+void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar) +{ + const MachineState *machine = MACHINE(qdev_get_machine()); + void *p; + int ret, cc; + + /* + * Until the SCLP STSI Facility reporting the MNEST value is used, + * a sel2 value of 2 is the only value allowed in STSI 15.1.x. + */ + if (sel2 != 2) { + setcc(cpu, 3); + return; + } + + p = g_malloc0(TARGET_PAGE_SIZE); + + setup_stsi(machine, p, 2); + + if (s390_is_pv()) { + ret = s390_cpu_pv_mem_write(cpu, 0, p, TARGET_PAGE_SIZE); + } else { + ret = s390_cpu_virt_mem_write(cpu, addr, ar, p,Quoted 4 lines
TARGET_PAGE_SIZE);
+ }
+ cc = ret ? 3 : 0;
+setcc(cpu, cc);Just a matter of taste (i.e. keep it if you like) - but you could scratch the cc variable in this function by just doing:
Quoted 2 lines
setcc(cpu, ret ? 3 : 0);
OK I can do this.
Thanks
Pierre
Quoted 6 lines
target/s390x/cpu_topology.c
Quoted 3 lines
+
g_free(p);target/s390x/cpu_topology.c new file +2
-0+} +Thomas
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [PATCH v7 04/13] s390x: topology: implementating Store Topology System Information
In reply to Pierre MorelQuoted 4 lines · Pierre Morel
The handling of STSI is enhanced with the interception of the function code 15 for storing CPU topology.
Using the objects built during the pluging of CPU, we build the
s/pluging/plugging/
Quoted 7 lines
SYSIB 15_1_x structures.
With this patch the maximum MNEST level is 2, this is also the only level allowed and only SYSIB 15_1_2 will be built.
Signed-off-by Pierre Morel <[email protected]>---
...
target/s390x/cpu.h S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); · line 893
Quoted 10 lines
target/s390x/cpu.h +1
-0@@ -889,4 +889,5 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr);#include "exec/cpu-all.h" +void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar);#endif
Please keep an empty line before the #endif
target/s390x/cpu_topology.c line 4
Quoted 10 lines
target/s390x/cpu_topology.c new file +4
-0@@ -0,0 +1,112 @@ +/* +* QEMU S390x CPU Topology +* +* Copyright IBM Corp. 2021
2022 ?
Quoted 6 lines
target/s390x/cpu_topology.c new file +6
-0+* Author(s): Pierre Morel <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/
...
Quoted 16 lines
target/s390x/cpu_topology.c new file +16
-0+void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar) +{ +const MachineState *machine =MACHINE (qdev_get_machine ()); +void *p; +int ret, cc; + +/* +* Until the SCLP STSI Facility reporting the MNEST value is used, +* a sel2 value of 2 is the only value allowed in STSI 15.1.x. +*/ +if (sel2 !=2 ) { +setcc (cpu,3 ); +return ; + } + + p =g_malloc0 (TARGET_PAGE_SIZE );
target/s390x/cpu_topology.c line 109
Quoted 10 lines
target/s390x/cpu_topology.c new file +10
-0+ +setup_stsi (machine, p,2 ); + +if (s390_is_pv ()) { + ret =s390_cpu_pv_mem_write (cpu,0 , p,TARGET_PAGE_SIZE ); + }else { + ret =s390_cpu_virt_mem_write (cpu, addr, ar, p,TARGET_PAGE_SIZE ); + } + cc = ret ?3 :0 ; +setcc (cpu, cc);
Just a matter of taste (i.e. keep it if you like) - but you could scratch the cc variable in this function by just doing:
setcc(cpu, ret ? 3 : 0);
target/s390x/cpu_topology.c line 112
Quoted 3 lines
target/s390x/cpu_topology.c new file +3
-0+g_free (p); +} +
Thomas
Re: [PATCH v7 04/13] s390x: topology: implementating Store Topology System Information
Quoted 8 lines · Thomas Huth
Quoted 4 lines · Pierre Morel
The handling of STSI is enhanced with the interception of the function code 15 for storing CPU topology.
Using the objects built during the pluging of CPU, we build the
s/pluging/plugging/
Yes
Quoted 8 lines
Quoted 7 lines
SYSIB 15_1_x structures.
With this patch the maximum MNEST level is 2, this is also the only level allowed and only SYSIB 15_1_2 will be built.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 10 lines
target/s390x/cpu.h S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); · line 891
Quoted 8 lines
target/s390x/cpu.h +1
-0@@ -889,4 +889,5 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr); #include "exec/cpu-all.h" +void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar); #endifPlease keep an empty line before the #endif
OK
Quoted 13 lines
target/s390x/cpu_topology.c line 4
Quoted 11 lines
target/s390x/cpu_topology.c new file +4
-0@@ -0,0 +1,112 @@ +/* +* QEMU S390x CPU Topology +* +* Copyright IBM Corp. 2021 2022 ?
Yes too
Quoted 39 lines
Quoted 8 lines
target/s390x/cpu_topology.c new file +3
-0+* Author(s): Pierre Morel <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */...
Quoted 23 lines
target/s390x/cpu_topology.c new file +23
-0+void insert_stsi_15_1_x (S390CPU *cpu,int sel2,__u64 addr,uint8_t ar) +{ + const MachineState *machine = MACHINE(qdev_get_machine()); + void *p; + int ret, cc; + + /* + * Until the SCLP STSI Facility reporting the MNEST value is used, + * a sel2 value of 2 is the only value allowed in STSI 15.1.x. + */ + if (sel2 != 2) { + setcc(cpu, 3); + return; + } + + p = g_malloc0(TARGET_PAGE_SIZE); + + setup_stsi(machine, p, 2); + + if (s390_is_pv()) { + ret = s390_cpu_pv_mem_write(cpu, 0, p, TARGET_PAGE_SIZE); + } else { + ret = s390_cpu_virt_mem_write(cpu, addr, ar, p,Quoted 4 lines
TARGET_PAGE_SIZE);
+ }
+ cc = ret ? 3 : 0;
+setcc(cpu, cc);Just a matter of taste (i.e. keep it if you like) - but you could scratch the cc variable in this function by just doing:
Quoted 2 lines
setcc(cpu, ret ? 3 : 0);
OK, I will changes all occurences
Thanks,
Pierre
Quoted 6 lines
target/s390x/cpu_topology.c
Quoted 3 lines
+
g_free(p);target/s390x/cpu_topology.c new file +2
-0+} +Thomas
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 5/13 s390x: topology: Adding books to CPU topology
In reply to Pierre MorelS390 CPU topology may have up to 5 topology containers. The first container above the cores is level 2, the sockets. We introduce here the books, book is the level containing sockets.
Let's add books, level3, containers to the CPU topology.
--- hw/core/machine-smp.c | 29 ++++++++++++++++++++++------- hw/core/machine.c | 2 ++ hw/s390x/s390-virtio-ccw.c | 1 + include/hw/boards.h | 4 ++++ qapi/machine.json | 9 +++++++-- qemu-options.hx | 5 +++-- softmmu/vl.c | 3 +++ 7 files changed, 42 insertions(+), 11 deletions(-)
hw/core/machine-smp.c +22 -7
@@ -31,6 +31,10 @@ static char *cpu_hierarchy_to_string(MachineState *ms)MachineClass *mc =MACHINE_GET_CLASS (ms);GString *s =g_string_new (NULL ); +if (mc->smp_props.books_supported) { +g_string_append_printf (s," * books (%u)" , ms->smp.books); + } +g_string_append_printf (s,"sockets (%u)" , ms->smp.sockets);if (mc->smp_props.dies_supported) {
@@ -73,6 +77,7 @@ void machine_parse_smp_config(MachineState *ms, {MachineClass *mc =MACHINE_GET_CLASS (ms);unsigned cpus = config->has_cpus ? config->cpus :0 ; +unsigned books = config->has_books ? config->books :0 ;unsigned sockets = config->has_sockets ? config->sockets :0 ;unsigned dies = config->has_dies ? config->dies :0 ;unsigned clusters = config->has_clusters ? config->clusters :0 ;
@@ -85,6 +90,7 @@ void machine_parse_smp_config(MachineState *ms,* explicit configuration like "cpus=0" is not allowed. */ if ((config->has_cpus && config->cpus == 0) || + (config->has_books && config->books == 0) || (config->has_sockets && config->sockets == 0) || (config->has_dies && config->dies == 0) || (config->has_clusters && config->clusters == 0) ||
@@ -111,6 +117,13 @@ void machine_parse_smp_config(MachineState *ms, dies = dies >0 ? dies :1 ; clusters = clusters >0 ? clusters :1 ; +if (!mc->smp_props.books_supported && books >1 ) { +error_setg (errp,"books not supported by this machine's CPU topology" ); +return ; + } + + books = books >0 ? books :1 ; +/* compute missing values based on the provided ones */ if (cpus ==0 && maxcpus ==0 ) { sockets = sockets >0 ? sockets :1 ;
@@ -124,33 +137,35 @@ void machine_parse_smp_config(MachineState *ms,if (sockets ==0 ) { cores = cores >0 ? cores :1 ; threads = threads >0 ? threads :1 ; - sockets = maxcpus / (dies * clusters * cores * threads); + sockets = maxcpus / (books * dies * clusters * cores * threads); }else if (cores ==0 ) { threads = threads >0 ? threads :1 ; - cores = maxcpus / (sockets * dies * clusters * threads); + cores = maxcpus / (books * sockets * dies * clusters * threads); } }else {/* prefer cores over sockets since 6.2 */ if (cores ==0 ) { sockets = sockets >0 ? sockets :1 ; threads = threads >0 ? threads :1 ; - cores = maxcpus / (sockets * dies * clusters * threads); + cores = maxcpus / (books * sockets * dies * clusters * threads); }else if (sockets ==0 ) { threads = threads >0 ? threads :1 ; - sockets = maxcpus / (dies * clusters * cores * threads); + sockets = maxcpus / (books * dies * clusters * cores * threads); } }/* try to calculate omitted threads at last */ if (threads ==0 ) { - threads = maxcpus / (sockets * dies * clusters * cores); + threads = maxcpus / (books * sockets * dies * clusters * cores); } } - maxcpus = maxcpus >0 ? maxcpus : sockets * dies * clusters * cores * threads; + maxcpus = maxcpus >0 ? maxcpus : books * sockets * dies * + clusters * cores * threads; cpus = cpus >0 ? cpus : maxcpus; ms->smp.cpus = cpus; + ms->smp.books = books; ms->smp.sockets = sockets; ms->smp.dies = dies; ms->smp.clusters = clusters;
@@ -159,7 +174,7 @@ void machine_parse_smp_config(MachineState *ms, ms->smp.max_cpus = maxcpus;/* sanity-check of the computed topology */ -if (sockets * dies * clusters * cores * threads != maxcpus) { +if (books * sockets * dies * clusters * cores * threads != maxcpus) { g_autofree char *topo_msg = cpu_hierarchy_to_string(ms);error_setg (errp,"Invalid CPU topology: " "product of the hierarchy must match maxcpus: "
hw/core/machine.c +2 -0
@@ -745,6 +745,7 @@ static void machine_get_smp(Object *obj, Visitor *v, const char *name,MachineState *ms =MACHINE (obj);SMPConfiguration *config = &(SMPConfiguration ){ .has_cpus = true, .cpus = ms->smp.cpus, + .has_books = true, .books = ms->smp.books, .has_sockets = true, .sockets = ms->smp.sockets, .has_dies = true, .dies = ms->smp.dies, .has_clusters = true, .clusters = ms->smp.clusters,
@@ -937,6 +938,7 @@ static void machine_initfn(Object *obj)/* default to mc->default_cpus */ ms->smp.cpus = mc->default_cpus; ms->smp.max_cpus = mc->default_cpus; + ms->smp.books =1 ; ms->smp.sockets =1 ; ms->smp.dies =1 ; ms->smp.clusters =1 ;
hw/s390x/s390-virtio-ccw.c +1 -0
@@ -616,6 +616,7 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data) hc->unplug_request = s390_machine_device_unplug_request; nc->nmi_monitor_handler = s390_nmi; mc->default_ram_id ="s390.ram" ; + mc->smp_props.books_supported = true; }static inline bool machine_get_aes_key_wrap (Object *obj,Error **errp)
include/hw/boards.h +4 -0
@@ -130,11 +130,13 @@ typedef struct {* @prefer_sockets - whether sockets are preferred over cores in smp parsing * @dies_supported - whether dies are supported by the machine * @clusters_supported - whether clusters are supported by the machine +* @books_supported - whether books are supported by the machine */ typedef struct {bool prefer_sockets;bool dies_supported;bool clusters_supported; +bool books_supported; }SMPCompatProps ;/**
@@ -299,6 +301,7 @@ typedef struct DeviceMemoryState {/** * CpuTopology: * @cpus: the number of present logical processors on the machine +* @books: the number of books on the machine * @sockets: the number of sockets on the machine * @dies: the number of dies in one socket * @clusters: the number of clusters in one die
@@ -308,6 +311,7 @@ typedef struct DeviceMemoryState {*/ typedef struct CpuTopology { unsigned int cpus; + unsigned int books; unsigned int sockets; unsigned int dies; unsigned int clusters;
qapi/machine.json +7 -2
@@ -866,12 +866,13 @@ # a CPU is being hotplugged. # # @node-id: NUMA node ID the CPU belongs to -# @socket-id: socket number within node/board the CPU belongs to +# @book-id: book number within node/board the CPU belongs to +# @socket-id: socket number within book/node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) # @core-id: core number within die the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 5 properties that could be present +# Note: currently there are 6 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in
@@ -881,6 +882,7 @@ ## { 'struct': 'CpuInstanceProperties', 'data': { '*node-id': 'int', + '*book-id': 'int', '*socket-id': 'int', '*die-id': 'int', '*core-id': 'int',
@@ -1401,6 +1403,8 @@ # # @cpus: number of virtual CPUs in the virtual machine # +# @books: number of books in the CPU topology +# # @sockets: number of sockets in the CPU topology # # @dies: number of dies per socket in the CPU topology
@@ -1417,6 +1421,7 @@ ## { 'struct': 'SMPConfiguration', 'data': { '*cpus': 'int', + '*books': 'int', '*sockets': 'int', '*dies': 'int', '*clusters': 'int',
qemu-options.hx +3 -2
@@ -206,11 +206,12 @@ SRST ERST DEF("smp", HAS_ARG, QEMU_OPTION_smp, - "-smp [[cpus=]n][,maxcpus=maxcpus][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n" + "-smp [[cpus=]n][,maxcpus=maxcpus][,books=books][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n" " set the number of initial CPUs to 'n' [default=1]\n" " maxcpus= maximum number of total CPUs, including\n" " offline CPUs for hotplug, etc\n" - " sockets= number of sockets on the machine board\n" + " books= number of books on the machine board\n" + " sockets= number of sockets in one book\n" " dies= number of dies in one socket\n" " clusters= number of clusters in one die\n" " cores= number of cores in one cluster\n"
softmmu/vl.c +3 -0
@@ -721,6 +721,9 @@ static QemuOptsList qemu_smp_opts = { { .name = "cpus", .type = QEMU_OPT_NUMBER, + }, { + .name = "books", + .type = QEMU_OPT_NUMBER, }, { .name = "sockets", .type = QEMU_OPT_NUMBER,
Signature · 1 line
2.27.0
PATCH v7 6/13 s390x: topology: Adding books to STSI
In reply to Pierre MorelLet's add STSI support for the container level 3, books, and provide the information back to the guest.
--- hw/s390x/cpu-topology.c | 147 +++++++++++++++++++++++++++++--- include/hw/s390x/cpu-topology.h | 20 ++++- include/hw/s390x/sclp.h | 1 + target/s390x/cpu_topology.c | 53 +++++++++--- 4 files changed, 194 insertions(+), 27 deletions(-)
hw/s390x/cpu-topology.c +136 -11
@@ -61,6 +61,26 @@ static S390TopologySocket *s390_create_socket(S390TopologyBook *book, int id)return socket; } +static S390TopologyBook *s390_create_book (S390TopologyDrawer *drawer,int id) +{ +DeviceState *dev; +S390TopologyBook *book; +const MachineState *ms =MACHINE (qdev_get_machine ()); + +if (drawer->bus->num_children >= ms->smp.books) { +return NULL ; + } + + dev =qdev_new (TYPE_S390_TOPOLOGY_BOOK ); +qdev_realize_and_unref (dev, drawer->bus, &error_fatal); + + book =S390_TOPOLOGY_BOOK (dev); + book->book_id = id; + drawer->cnt++; + +return book; +} +/* * s390_get_cores: * @socket: the socket to search into
@@ -110,6 +130,31 @@ static S390TopologySocket *s390_get_socket(S390TopologyBook *book,return s390_create_socket (book, socket_id); } +/* +* s390_get_book: +* @drawer: The drawer to search into +* @book_id: the identifier of the book to search for +* +* returns a pointer to a S390TopologySocket structure within a drawer having +* the specified book_id. +* First search if the drawer is already containing the S390TopologySocket +* structure and if not create one with this book_id. +*/ +static S390TopologyBook *s390_get_book (S390TopologyDrawer *drawer, +int book_id) +{ +S390TopologyBook *book; +BusChild *kid; + + QTAILQ_FOREACH(kid, &drawer->bus->children, sibling) { + book =S390_TOPOLOGY_BOOK (kid->child); +if (book->book_id == book_id) { +return book; + } + } +return s390_create_book (drawer, book_id); +} +/* * s390_topology_new_cpu: * @core_id: the core ID is machine wide
@@ -124,16 +169,21 @@ static S390TopologySocket *s390_get_socket(S390TopologyBook *book,void s390_topology_new_cpu (int core_id) {const MachineState *ms =MACHINE (qdev_get_machine ()); +S390TopologyDrawer *drawer;S390TopologyBook *book;S390TopologySocket *socket;S390TopologyCores *cores;int origin, bit;int nb_cores_per_socket; +int nb_cores_per_book; - book =s390_get_topology (); + drawer =s390_get_topology ();/* Cores for the S390 topology are cores and threads of the QEMU topology */ nb_cores_per_socket = ms->smp.cores * ms->smp.threads; + nb_cores_per_book = ms->smp.sockets * nb_cores_per_socket; + + book =s390_get_book (drawer, core_id / nb_cores_per_book); socket =s390_get_socket (book, core_id / nb_cores_per_socket);/*
@@ -166,23 +216,23 @@ void s390_topology_setup(MachineState *ms)DeviceState *dev;/* Create BOOK bridge device */ - dev =qdev_new (TYPE_S390_TOPOLOGY_BOOK ); + dev =qdev_new (TYPE_S390_TOPOLOGY_DRAWER );object_property_add_child (qdev_get_machine (), -TYPE_S390_TOPOLOGY_BOOK ,OBJECT (dev)); +TYPE_S390_TOPOLOGY_DRAWER ,OBJECT (dev));sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); } -S390TopologyBook *s390_get_topology (void ) +S390TopologyDrawer *s390_get_topology (void ) { -static S390TopologyBook *book; +static S390TopologyDrawer *drawer; -if (!book) { - book =S390_TOPOLOGY_BOOK ( -object_resolve_path (TYPE_S390_TOPOLOGY_BOOK ,NULL )); -assert (book !=NULL ); +if (!drawer) { + drawer =S390_TOPOLOGY_DRAWER (object_resolve_path ( +TYPE_S390_TOPOLOGY_DRAWER ,NULL )); +assert (drawer !=NULL ); } -return book; +return drawer; }/* --- CORES Definitions --- */
@@ -333,12 +383,13 @@ static void book_class_init(ObjectClass *oc, void *data) hc->unplug = qdev_simple_device_unplug_cb;set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); dc->realize = s390_book_device_realize; + dc->bus_type =TYPE_S390_TOPOLOGY_DRAWER_BUS ; dc->desc ="topology book" ; }static const TypeInfo book_info = { .name =TYPE_S390_TOPOLOGY_BOOK , - .parent =TYPE_SYS_BUS_DEVICE , + .parent =TYPE_DEVICE , .instance_size =sizeof (S390TopologyBook), .class_init = book_class_init, .interfaces = (InterfaceInfo []) {
@@ -347,6 +398,78 @@ static const TypeInfo book_info = { } }; +/* --- DRAWER Definitions --- */ +static Property s390_topology_drawer_properties[] = { +DEFINE_PROP_UINT8 ("drawer_id" , S390TopologyDrawer, drawer_id,0 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static char *drawer_bus_get_dev_path (DeviceState *dev) +{ +S390TopologyDrawer *drawer =S390_TOPOLOGY_DRAWER (dev); +DeviceState *node = dev->parent_bus->parent; +char *id =qdev_get_dev_path (node); +char *ret; + +if (id) { + ret =g_strdup_printf ("%s:%02d" , id, drawer->drawer_id); +g_free (id); + }else { + ret =g_malloc (6 ); +snprintf (ret,6 ,"_:%02d" , drawer->drawer_id); + } + +return ret; +} + +static void drawer_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = drawer_bus_get_dev_path; + k->max_dev =S390_MAX_DRAWERS ; +} + +static const TypeInfo drawer_bus_info = { + .name =TYPE_S390_TOPOLOGY_DRAWER_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = drawer_bus_class_init, +}; + +static void s390_drawer_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologyDrawer *drawer =S390_TOPOLOGY_DRAWER (dev); +BusState *bus; + + bus =qbus_new (TYPE_S390_TOPOLOGY_DRAWER_BUS , dev, +TYPE_S390_TOPOLOGY_DRAWER_BUS ); +qbus_set_hotplug_handler (bus,OBJECT (dev)); + drawer->bus = bus; +} + +static void drawer_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->realize = s390_drawer_device_realize; +device_class_set_props (dc, s390_topology_drawer_properties); + dc->desc ="topology drawer" ; +} + +static const TypeInfo drawer_info = { + .name =TYPE_S390_TOPOLOGY_DRAWER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (S390TopologyDrawer), + .class_init = drawer_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +};static void topology_register (void ) {type_register_static (&cpu_cores_info);
@@ -354,6 +477,8 @@ static void topology_register(void)type_register_static (&socket_info);type_register_static (&book_bus_info);type_register_static (&book_info); +type_register_static (&drawer_bus_info); +type_register_static (&drawer_info); }type_init (topology_register);
include/hw/s390x/cpu-topology.h +16 -4
@@ -56,18 +56,30 @@ OBJECT_DECLARE_SIMPLE_TYPE(S390TopologySocket, S390_TOPOLOGY_SOCKET)#define TYPE_S390_TOPOLOGY_BOOK "topology book"#define TYPE_S390_TOPOLOGY_BOOK_BUS "book-bus"struct S390TopologyBook { -SysBusDevice parent_obj; +DeviceState parent_obj;BusState *bus;uint8_t book_id;int cnt; };typedef struct S390TopologyBook S390TopologyBook ; OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyBook, S390_TOPOLOGY_BOOK) -#define S390_MAX_BOOKS 1 +#define S390_MAX_BOOKS 4 + +#define TYPE_S390_TOPOLOGY_DRAWER "topology drawer" +#define TYPE_S390_TOPOLOGY_DRAWER_BUS "drawer-bus" +struct S390TopologyDrawer { +SysBusDevice parent_obj; +BusState *bus; +uint8_t drawer_id; +int cnt; +}; +typedef struct S390TopologyDrawer S390TopologyDrawer ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyDrawer, S390_TOPOLOGY_DRAWER) +#define S390_MAX_DRAWERS 1 -S390TopologyBook *s390_init_topology (void ); +S390TopologyDrawer *s390_init_topology (void ); -S390TopologyBook *s390_get_topology (void ); +S390TopologyDrawer *s390_get_topology (void );void s390_topology_setup (MachineState *ms);void s390_topology_new_cpu (int core_id);
include/hw/s390x/sclp.h +1 -0
@@ -111,6 +111,7 @@ typedef struct CPUEntry {uint8_t reserved1; }QEMU_PACKED CPUEntry; +#define SCLP_READ_SCP_INFO_MNEST 3#define SCLP_READ_SCP_INFO_FIXED_CPU_OFFSET 128 typedef struct ReadInfo { SCCBHeader h;
target/s390x/cpu_topology.c +41 -12
96 lines not on this page · raw message
Signature · 1 line
2.27.0
Re: [PATCH v7 06/13] s390x: topology: Adding books to STSI
Quoted 5 lines · Pierre Morel
Let's add STSI support for the container level 3, books, and provide the information back to the guest.
Signed-off-by Pierre Morel <[email protected]>---
...
hw/s390x/cpu-topology.c static const TypeInfo book_info = { · line 419
Quoted 13 lines
hw/s390x/cpu-topology.c +13
-0+static char *drawer_bus_get_dev_path (DeviceState *dev) +{ +S390TopologyDrawer *drawer =S390_TOPOLOGY_DRAWER (dev); +DeviceState *node = dev->parent_bus->parent; +char *id =qdev_get_dev_path (node); +char *ret; + +if (id) { + ret =g_strdup_printf ("%s:%02d" , id, drawer->drawer_id); +g_free (id); + }else { + ret =g_malloc (6 ); +snprintf (ret,6 ,"_:%02d" , drawer->drawer_id);
Please use g_strdup_printf() here as well.
Thomas
Quoted 4 lines
hw/s390x/cpu-topology.c +4
-0+ } + +return ret; +}
Re: [PATCH v7 06/13] s390x: topology: Adding books to STSI
Quoted 7 lines · Thomas Huth
Quoted 5 lines · Pierre Morel
Let's add STSI support for the container level 3, books, and provide the information back to the guest.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 15 lines
hw/s390x/cpu-topology.c static const TypeInfo book_info = { · line 419
Quoted 13 lines
hw/s390x/cpu-topology.c +13
-0+static char *drawer_bus_get_dev_path (DeviceState *dev) +{ + S390TopologyDrawer *drawer = S390_TOPOLOGY_DRAWER(dev); + DeviceState *node = dev->parent_bus->parent; + char *id = qdev_get_dev_path(node); + char *ret; + + if (id) { + ret = g_strdup_printf("%s:%02d", id, drawer->drawer_id); + g_free(id); + } else { + ret = g_malloc(6); + snprintf(ret, 6, "_:%02d", drawer->drawer_id);Please use
g_strdup_printf()here as well.
yes,
Thanks
pierre
Quoted 8 lines
Thomas
Quoted 4 lines
+ }
hw/s390x/cpu-topology.c +3
-0+ + return ret; +}
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 7/13 s390x: topology: Adding drawers to CPU topology
In reply to Pierre MorelS390 CPU topology may have up to 5 topology containers. The first container above the cores is level 2, the sockets, and the level 3, containing sockets are the books.
We introduce here the drawers, drawers is the level containing books.
Let's add drawers, level4, containers to the CPU topology.
--- hw/core/machine-smp.c | 33 ++++++++++++++++++++++++++------- hw/core/machine.c | 2 ++ hw/s390x/s390-virtio-ccw.c | 1 + include/hw/boards.h | 4 ++++ qapi/machine.json | 9 +++++++-- qemu-options.hx | 5 +++-- softmmu/vl.c | 3 +++ 7 files changed, 46 insertions(+), 11 deletions(-)
hw/core/machine-smp.c +26 -7
@@ -31,6 +31,10 @@ static char *cpu_hierarchy_to_string(MachineState *ms)MachineClass *mc =MACHINE_GET_CLASS (ms);GString *s =g_string_new (NULL ); +if (mc->smp_props.drawers_supported) { +g_string_append_printf (s," * drawers (%u)" , ms->smp.drawers); + } +if (mc->smp_props.books_supported) {g_string_append_printf (s," * books (%u)" , ms->smp.books); }
@@ -77,6 +81,7 @@ void machine_parse_smp_config(MachineState *ms, {MachineClass *mc =MACHINE_GET_CLASS (ms);unsigned cpus = config->has_cpus ? config->cpus :0 ; +unsigned drawers = config->has_drawers ? config->drawers :0 ;unsigned books = config->has_books ? config->books :0 ;unsigned sockets = config->has_sockets ? config->sockets :0 ;unsigned dies = config->has_dies ? config->dies :0 ;
@@ -90,6 +95,7 @@ void machine_parse_smp_config(MachineState *ms,* explicit configuration like "cpus=0" is not allowed. */ if ((config->has_cpus && config->cpus == 0) || + (config->has_drawers && config->drawers == 0) || (config->has_books && config->books == 0) || (config->has_sockets && config->sockets == 0) || (config->has_dies && config->dies == 0) ||
@@ -124,6 +130,13 @@ void machine_parse_smp_config(MachineState *ms, books = books >0 ? books :1 ; +if (!mc->smp_props.drawers_supported && drawers >1 ) { +error_setg (errp,"drawers not supported by this machine's CPU topology" ); +return ; + } + + drawers = drawers >0 ? drawers :1 ; +/* compute missing values based on the provided ones */ if (cpus ==0 && maxcpus ==0 ) { sockets = sockets >0 ? sockets :1 ;
@@ -137,34 +150,40 @@ void machine_parse_smp_config(MachineState *ms,if (sockets ==0 ) { cores = cores >0 ? cores :1 ; threads = threads >0 ? threads :1 ; - sockets = maxcpus / (books * dies * clusters * cores * threads); + sockets = maxcpus / + (drawers * books * dies * clusters * cores * threads); }else if (cores ==0 ) { threads = threads >0 ? threads :1 ; - cores = maxcpus / (books * sockets * dies * clusters * threads); + cores = maxcpus / + (drawers * books * sockets * dies * clusters * threads); } }else {/* prefer cores over sockets since 6.2 */ if (cores ==0 ) { sockets = sockets >0 ? sockets :1 ; threads = threads >0 ? threads :1 ; - cores = maxcpus / (books * sockets * dies * clusters * threads); + cores = maxcpus / + (drawers * books * sockets * dies * clusters * threads); }else if (sockets ==0 ) { threads = threads >0 ? threads :1 ; - sockets = maxcpus / (books * dies * clusters * cores * threads); + sockets = maxcpus / + (drawers * books * dies * clusters * cores * threads); } }/* try to calculate omitted threads at last */ if (threads ==0 ) { - threads = maxcpus / (books * sockets * dies * clusters * cores); + threads = maxcpus / + (drawers * books * sockets * dies * clusters * cores); } } - maxcpus = maxcpus >0 ? maxcpus : books * sockets * dies * + maxcpus = maxcpus >0 ? maxcpus : drawers * books * sockets * dies * clusters * cores * threads; cpus = cpus >0 ? cpus : maxcpus; ms->smp.cpus = cpus; + ms->smp.drawers = drawers; ms->smp.books = books; ms->smp.sockets = sockets; ms->smp.dies = dies;
@@ -174,7 +193,7 @@ void machine_parse_smp_config(MachineState *ms, ms->smp.max_cpus = maxcpus;/* sanity-check of the computed topology */ -if (books * sockets * dies * clusters * cores * threads != maxcpus) { +if (drawers * books * sockets * dies * clusters * cores * threads != maxcpus) { g_autofree char *topo_msg = cpu_hierarchy_to_string(ms);error_setg (errp,"Invalid CPU topology: " "product of the hierarchy must match maxcpus: "
hw/core/machine.c +2 -0
@@ -745,6 +745,7 @@ static void machine_get_smp(Object *obj, Visitor *v, const char *name,MachineState *ms =MACHINE (obj);SMPConfiguration *config = &(SMPConfiguration ){ .has_cpus = true, .cpus = ms->smp.cpus, + .has_drawers = true, .drawers = ms->smp.drawers, .has_books = true, .books = ms->smp.books, .has_sockets = true, .sockets = ms->smp.sockets, .has_dies = true, .dies = ms->smp.dies,
@@ -938,6 +939,7 @@ static void machine_initfn(Object *obj)/* default to mc->default_cpus */ ms->smp.cpus = mc->default_cpus; ms->smp.max_cpus = mc->default_cpus; + ms->smp.drawers =1 ; ms->smp.books =1 ; ms->smp.sockets =1 ; ms->smp.dies =1 ;
hw/s390x/s390-virtio-ccw.c +1 -0
@@ -617,6 +617,7 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data) nc->nmi_monitor_handler = s390_nmi; mc->default_ram_id ="s390.ram" ; mc->smp_props.books_supported = true; + mc->smp_props.drawers_supported = true; }static inline bool machine_get_aes_key_wrap (Object *obj,Error **errp)
include/hw/boards.h +4 -0
@@ -131,12 +131,14 @@ typedef struct {* @dies_supported - whether dies are supported by the machine * @clusters_supported - whether clusters are supported by the machine * @books_supported - whether books are supported by the machine +* @drawers_supported - whether drawers are supported by the machine */ typedef struct {bool prefer_sockets;bool dies_supported;bool clusters_supported;bool books_supported; +bool drawers_supported; }SMPCompatProps ;/**
@@ -301,6 +303,7 @@ typedef struct DeviceMemoryState {/** * CpuTopology: * @cpus: the number of present logical processors on the machine +* @drawers: the number of drawers on the machine * @books: the number of books on the machine * @sockets: the number of sockets on the machine * @dies: the number of dies in one socket
@@ -311,6 +314,7 @@ typedef struct DeviceMemoryState {*/ typedef struct CpuTopology { unsigned int cpus; + unsigned int drawers; unsigned int books; unsigned int sockets; unsigned int dies;
qapi/machine.json +7 -2
@@ -866,13 +866,14 @@ # a CPU is being hotplugged. # # @node-id: NUMA node ID the CPU belongs to -# @book-id: book number within node/board the CPU belongs to +# @drawer-id: drawer number within node/board the CPU belongs to +# @book-id: book number within drawer/node/board the CPU belongs to # @socket-id: socket number within book/node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) # @core-id: core number within die the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 6 properties that could be present +# Note: currently there are 7 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in
@@ -882,6 +883,7 @@ ## { 'struct': 'CpuInstanceProperties', 'data': { '*node-id': 'int', + '*drawer-id': 'int', '*book-id': 'int', '*socket-id': 'int', '*die-id': 'int',
@@ -1403,6 +1405,8 @@ # # @cpus: number of virtual CPUs in the virtual machine # +# @drawers: number of drawers in the CPU topology +# # @books: number of books in the CPU topology # # @sockets: number of sockets in the CPU topology
@@ -1421,6 +1425,7 @@ ## { 'struct': 'SMPConfiguration', 'data': { '*cpus': 'int', + '*drawers': 'int', '*books': 'int', '*sockets': 'int', '*dies': 'int',
qemu-options.hx +3 -2
@@ -206,11 +206,12 @@ SRST ERST DEF("smp", HAS_ARG, QEMU_OPTION_smp, - "-smp [[cpus=]n][,maxcpus=maxcpus][,books=books][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n" + "-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n" " set the number of initial CPUs to 'n' [default=1]\n" " maxcpus= maximum number of total CPUs, including\n" " offline CPUs for hotplug, etc\n" - " books= number of books on the machine board\n" + " drawers= number of drawers on the machine board\n" + " books= number of books in one drawer\n" " sockets= number of sockets in one book\n" " dies= number of dies in one socket\n" " clusters= number of clusters in one die\n"
softmmu/vl.c +3 -0
@@ -721,6 +721,9 @@ static QemuOptsList qemu_smp_opts = { { .name = "cpus", .type = QEMU_OPT_NUMBER, + }, { + .name = "drawers", + .type = QEMU_OPT_NUMBER, }, { .name = "books", .type = QEMU_OPT_NUMBER,
Signature · 1 line
2.27.0
PATCH v7 8/13 s390x: topology: Adding drawers to STSI
In reply to Pierre MorelLet's add STSI support for the container level 4, drawers, and provide the information back to the guest.
--- hw/s390x/cpu-topology.c | 137 +++++++++++++++++++++++++++++--- include/hw/s390x/cpu-topology.h | 19 ++++- include/hw/s390x/sclp.h | 2 +- target/s390x/cpu_topology.c | 40 ++++++++-- 4 files changed, 176 insertions(+), 22 deletions(-)
hw/s390x/cpu-topology.c +126 -11
@@ -81,6 +81,26 @@ static S390TopologyBook *s390_create_book(S390TopologyDrawer *drawer, int id)return book; } +static S390TopologyDrawer *s390_create_drawer (S390TopologyNode *node,int id) +{ +DeviceState *dev; +S390TopologyDrawer *drawer; +const MachineState *ms =MACHINE (qdev_get_machine ()); + +if (node->bus->num_children >= ms->smp.drawers) { +return NULL ; + } + + dev =qdev_new (TYPE_S390_TOPOLOGY_DRAWER ); +qdev_realize_and_unref (dev, node->bus, &error_fatal); + + drawer =S390_TOPOLOGY_DRAWER (dev); + drawer->drawer_id = id; + node->cnt++; + +return drawer; +} +/* * s390_get_cores: * @socket: the socket to search into
@@ -130,6 +150,31 @@ static S390TopologySocket *s390_get_socket(S390TopologyBook *book,return s390_create_socket (book, socket_id); } +/* +* s390_get_drawer: +* @node: The node to search into +* @drawer_id: the identifier of the drawer to search for +* +* returns a pointer to a S390TopologyDrawer structure within a book having +* the specified drawer_id. +* First search if the book is already containing the S390TopologyDrawer +* structure and if not create one with this drawer_id. +*/ +static S390TopologyDrawer *s390_get_drawer (S390TopologyNode *node, +int drawer_id) +{ +S390TopologyDrawer *drawer; +BusChild *kid; + + QTAILQ_FOREACH(kid, &node->bus->children, sibling) { + drawer =S390_TOPOLOGY_DRAWER (kid->child); +if (drawer->drawer_id == drawer_id) { +return drawer; + } + } +return s390_create_drawer (node, drawer_id); +} +/* * s390_get_book: * @drawer: The drawer to search into
@@ -169,6 +214,7 @@ static S390TopologyBook *s390_get_book(S390TopologyDrawer *drawer,void s390_topology_new_cpu (int core_id) {const MachineState *ms =MACHINE (qdev_get_machine ()); +S390TopologyNode *node;S390TopologyDrawer *drawer;S390TopologyBook *book;S390TopologySocket *socket;
@@ -176,13 +222,16 @@ void s390_topology_new_cpu(int core_id)int origin, bit;int nb_cores_per_socket;int nb_cores_per_book; +int nb_cores_per_drawer; - drawer =s390_get_topology (); + node =s390_get_topology ();/* Cores for the S390 topology are cores and threads of the QEMU topology */ nb_cores_per_socket = ms->smp.cores * ms->smp.threads; nb_cores_per_book = ms->smp.sockets * nb_cores_per_socket; + nb_cores_per_drawer = ms->smp.books * nb_cores_per_book; + drawer =s390_get_drawer (node, core_id / nb_cores_per_drawer); book =s390_get_book (drawer, core_id / nb_cores_per_book); socket =s390_get_socket (book, core_id / nb_cores_per_socket);
@@ -216,23 +265,23 @@ void s390_topology_setup(MachineState *ms)DeviceState *dev;/* Create BOOK bridge device */ - dev =qdev_new (TYPE_S390_TOPOLOGY_DRAWER ); + dev =qdev_new (TYPE_S390_TOPOLOGY_NODE );object_property_add_child (qdev_get_machine (), -TYPE_S390_TOPOLOGY_DRAWER ,OBJECT (dev)); +TYPE_S390_TOPOLOGY_NODE ,OBJECT (dev));sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); } -S390TopologyDrawer *s390_get_topology (void ) +S390TopologyNode *s390_get_topology (void ) { -static S390TopologyDrawer *drawer; +static S390TopologyNode *node; -if (!drawer) { - drawer =S390_TOPOLOGY_DRAWER (object_resolve_path ( -TYPE_S390_TOPOLOGY_DRAWER ,NULL )); -assert (drawer !=NULL ); +if (!node) { + node =S390_TOPOLOGY_NODE (object_resolve_path ( +TYPE_S390_TOPOLOGY_NODE ,NULL )); +assert (node !=NULL ); } -return drawer; +return node; }/* --- CORES Definitions --- */
@@ -455,6 +504,7 @@ static void drawer_class_init(ObjectClass *oc, void *data) hc->unplug = qdev_simple_device_unplug_cb;set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->bus_type =TYPE_S390_TOPOLOGY_NODE_BUS ; dc->realize = s390_drawer_device_realize;device_class_set_props (dc, s390_topology_drawer_properties); dc->desc ="topology drawer" ;
@@ -462,7 +512,7 @@ static void drawer_class_init(ObjectClass *oc, void *data)static const TypeInfo drawer_info = { .name =TYPE_S390_TOPOLOGY_DRAWER , - .parent =TYPE_SYS_BUS_DEVICE , + .parent =TYPE_DEVICE , .instance_size =sizeof (S390TopologyDrawer), .class_init = drawer_class_init, .interfaces = (InterfaceInfo []) {
@@ -470,6 +520,69 @@ static const TypeInfo drawer_info = { { } } }; + +/* --- NODE Definitions --- */ + +/* +* Nodes are the first level of CPU topology we support +* only one NODE for the moment. +*/ +static char *node_bus_get_dev_path (DeviceState *dev) +{ +return g_strdup_printf ("00" ); +} + +static void node_bus_class_init (ObjectClass *oc,void *data) +{ +BusClass *k =BUS_CLASS (oc); + + k->get_dev_path = node_bus_get_dev_path; + k->max_dev =S390_MAX_NODES ; +} + +static const TypeInfo node_bus_info = { + .name =TYPE_S390_TOPOLOGY_NODE_BUS , + .parent =TYPE_BUS , + .instance_size =0 , + .class_init = node_bus_class_init, +}; + +static void s390_node_device_realize (DeviceState *dev,Error **errp) +{ +S390TopologyNode *node =S390_TOPOLOGY_NODE (dev); +BusState *bus; + +/* Create NODE bus on NODE bridge device */ + bus =qbus_new (TYPE_S390_TOPOLOGY_NODE_BUS , dev, +TYPE_S390_TOPOLOGY_NODE_BUS ); + node->bus = bus; + +/* Enable hotplugging */ +qbus_set_hotplug_handler (bus,OBJECT (dev)); +} + +static void node_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + + hc->unplug = qdev_simple_device_unplug_cb; +set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + dc->realize = s390_node_device_realize; + dc->desc ="topology node" ; +} + +static const TypeInfo node_info = { + .name =TYPE_S390_TOPOLOGY_NODE , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (S390TopologyNode), + .class_init = node_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } +}; +static void topology_register (void ) {type_register_static (&cpu_cores_info);
@@ -479,6 +592,8 @@ static void topology_register(void)type_register_static (&book_info);type_register_static (&drawer_bus_info);type_register_static (&drawer_info); +type_register_static (&node_bus_info); +type_register_static (&node_info); }type_init (topology_register);
include/hw/s390x/cpu-topology.h +15 -4
@@ -68,18 +68,29 @@ OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyBook, S390_TOPOLOGY_BOOK)#define TYPE_S390_TOPOLOGY_DRAWER "topology drawer"#define TYPE_S390_TOPOLOGY_DRAWER_BUS "drawer-bus"struct S390TopologyDrawer { -SysBusDevice parent_obj; +DeviceState parent_obj;BusState *bus;uint8_t drawer_id;int cnt; };typedef struct S390TopologyDrawer S390TopologyDrawer ; OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyDrawer, S390_TOPOLOGY_DRAWER) -#define S390_MAX_DRAWERS 1 +#define S390_MAX_DRAWERS 4 -S390TopologyDrawer *s390_init_topology (void ); +#define TYPE_S390_TOPOLOGY_NODE "topology node" +#define TYPE_S390_TOPOLOGY_NODE_BUS "node-bus" +struct S390TopologyNode { +SysBusDevice parent_obj; +BusState *bus; +uint8_t node_id; +int cnt; +}; +typedef struct S390TopologyNode S390TopologyNode ; +OBJECT_DECLARE_SIMPLE_TYPE(S390TopologyNode, S390_TOPOLOGY_NODE) +#define S390_MAX_NODES 1 -S390TopologyDrawer *s390_get_topology (void ); +S390TopologyNode *s390_init_topology (void ); +S390TopologyNode *s390_get_topology (void );void s390_topology_setup (MachineState *ms);void s390_topology_new_cpu (int core_id);
include/hw/s390x/sclp.h +1 -1
@@ -111,7 +111,7 @@ typedef struct CPUEntry {uint8_t reserved1; }QEMU_PACKED CPUEntry; -#define SCLP_READ_SCP_INFO_MNEST 3 +#define SCLP_READ_SCP_INFO_MNEST 4#define SCLP_READ_SCP_INFO_FIXED_CPU_OFFSET 128 typedef struct ReadInfo { SCCBHeader h;
target/s390x/cpu_topology.c +34 -6
@@ -77,36 +77,64 @@ static int set_book(const MachineState *ms, void *p,return len; } +static int set_drawer (const MachineState *ms,void *p, +S390TopologyDrawer *drawer,int level) +{ +BusChild *kid; +int l, len =0 ; + +if (level >=4 ) { + len +=stsi_15_container (p,3 , drawer->drawer_id); + p += len; + } + + QTAILQ_FOREACH_REVERSE(kid, &drawer->bus->children, sibling) { + l =set_book (ms, p,S390_TOPOLOGY_BOOK (kid->child), level); + p += l; + len += l; + } + +return len; +} +static void setup_stsi (const MachineState *ms,void *p,int level) { -S390TopologyDrawer *drawer; +S390TopologyNode *node;SysIB_151x *sysib;BusChild *kid; -int nb_sockets, nb_books; +int nb_sockets, nb_books, nb_drawers;int len, l; sysib = (SysIB_151x *)p; sysib->mnest = level;switch (level) {case 2 : + nb_drawers =0 ; nb_books =0 ; - nb_sockets = ms->smp.sockets * ms->smp.books; + nb_sockets = ms->smp.sockets * ms->smp.books * ms->smp.drawers;break ;case 3 : + nb_drawers =0 ; + nb_books = ms->smp.books * ms->smp.drawers; + nb_sockets = ms->smp.sockets; +break ; +case 4 : + nb_drawers = ms->smp.drawers; nb_books = ms->smp.books; nb_sockets = ms->smp.sockets;break ; } + sysib->mag[TOPOLOGY_NR_MAG4 ] = nb_drawers; sysib->mag[TOPOLOGY_NR_MAG3 ] = nb_books; sysib->mag[TOPOLOGY_NR_MAG2 ] = nb_sockets; sysib->mag[TOPOLOGY_NR_MAG1 ] = ms->smp.cores * ms->smp.threads; - drawer =s390_get_topology (); + node =s390_get_topology (); len =sizeof (SysIB_151x); p += len; - QTAILQ_FOREACH_REVERSE(kid, &drawer->bus->children, sibling) { - l =set_book (ms, p,S390_TOPOLOGY_BOOK (kid->child), level); + QTAILQ_FOREACH_REVERSE(kid, &node->bus->children, sibling) { + l =set_drawer (ms, p,S390_TOPOLOGY_DRAWER (kid->child), level); p += l; len += l; }
Signature · 1 line
2.27.0
Re: [PATCH v7 08/13] s390x: topology: Adding drawers to STSI
Quoted 5 lines · Pierre Morel
Let's add STSI support for the container level 4, drawers, and provide the information back to the guest.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 5 lines
hw/s390x/cpu-topology.c +1
-0@@ -470,6 +520,69 @@ static const TypeInfo drawer_info = { { } } }; +
hw/s390x/cpu-topology.c static const TypeInfo drawer_info = { · line 533
Quoted 10 lines
hw/s390x/cpu-topology.c +10
-0+/* --- NODE Definitions --- */ + +/* +* Nodes are the first level of CPU topology we support +* only one NODE for the moment. +*/ +static char *node_bus_get_dev_path (DeviceState *dev) +{ +return g_strdup_printf ("00" ); +}
g_strdup("00") please.
Thomas
Re: [PATCH v7 08/13] s390x: topology: Adding drawers to STSI
Quoted 7 lines · Thomas Huth
Quoted 5 lines · Pierre Morel
Let's add STSI support for the container level 4, drawers, and provide the information back to the guest.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 16 lines
Quoted 5 lines
hw/s390x/cpu-topology.c +1
-0@@ -470,6 +520,69 @@ static const TypeInfo drawer_info = { { } } }; +hw/s390x/cpu-topology.c static const TypeInfo drawer_info = { · line 533
Quoted 10 lines
hw/s390x/cpu-topology.c +10
-0+/* --- NODE Definitions --- */ + +/* +* Nodes are the first level of CPU topology we support +* only one NODE for the moment. +*/ +static char *node_bus_get_dev_path (DeviceState *dev) +{ + return g_strdup_printf("00"); +}
g_strdup("00")please.
Yes, thanks, will change it
Regards,
Pierre
Quoted 3 lines
Thomas
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 9/13 s390x: topology: implementing numa for the s390x topology
In reply to Pierre MorelS390x CPU Topology allows a non uniform repartition of the CPU inside the topology containers, sockets, books and drawers.
We use numa to place the CPU inside the right topology container and report the non uniform topology to the guest.
Note that s390x needs CPU0 to belong to the topology and consequently all topology must include CPU0.
We accept a partial QEMU numa definition, in that case undefined CPUs are added to free slots in the topology starting with slot 0 and going up.
--- hw/core/machine.c | 18 ++++++++++ hw/s390x/s390-virtio-ccw.c | 68 ++++++++++++++++++++++++++++++++++---- 2 files changed, 79 insertions(+), 7 deletions(-)
hw/core/machine.c +18 -0
@@ -689,6 +689,16 @@ void machine_set_cpu_numa_node(MachineState *machine,return ; } +if (props->has_book_id && !slot->props.has_book_id) { +error_setg (errp,"book-id is not supported" ); +return ; + } + +if (props->has_drawer_id && !slot->props.has_drawer_id) { +error_setg (errp,"drawer-id is not supported" ); +return ; + } +/* skip slots with explicit mismatch */ if (props->has_thread_id && props->thread_id != slot->props.thread_id) {continue ;
@@ -706,6 +716,14 @@ void machine_set_cpu_numa_node(MachineState *machine,continue ; } +if (props->has_book_id && props->book_id != slot->props.book_id) { +continue ; + } + +if (props->has_drawer_id && props->drawer_id != slot->props.drawer_id) { +continue ; + } +/* reject assignment if slot is already assigned, for compatibility * of legacy cpu_index mapping with SPAPR core based mapping do not * error out if cpu thread and matched core have the same node-id */
hw/s390x/s390-virtio-ccw.c +61 -7
117 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH v7 10/13 s390x: kvm: topology: interception of PTF instruction
In reply to Pierre MorelWhen the host supports the CPU topology facility, the PTF instruction with function code 2 is interpreted by the SIE, provided that the userland hypervizor activates the interpretation by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted and must be emulated by the userland hypervizor.
--- hw/s390x/s390-virtio-ccw.c | 50 ++++++++++++++++++++++++++++++ include/hw/s390x/s390-virtio-ccw.h | 6 ++++ target/s390x/kvm/kvm.c | 14 +++++++++ 3 files changed, 70 insertions(+)
hw/s390x/s390-virtio-ccw.c +50 -0
@@ -434,6 +434,56 @@ static void s390_pv_prepare_reset(S390CcwMachineState *ms)s390_pv_prep_reset (); } +/* +* s390_handle_ptf: +* +* @register 1: contains the function code +* +* Function codes 0 and 1 handle the CPU polarization. +* We assume an horizontal topology, the only one supported currently +* by Linux, consequently we answer to function code 0, requesting +* horizontal polarization that it is already the current polarization +* and reject vertical polarization request without further explanation. +* +* Function code 2 is handling topology changes and is interpreted +* by the SIE. +*/ +int s390_handle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra) +{ +CPUS390XState *env = &cpu->env; +uint64_t reg = env->regs[r1]; +uint8_t fc = reg &S390_TOPO_FC_MASK ; + +if (!s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY )) { +s390_program_interrupt (env,PGM_OPERATION , ra); +return 0 ; + } + +if (env->psw.mask &PSW_MASK_PSTATE ) { +s390_program_interrupt (env,PGM_PRIVILEGED , ra); +return 0 ; + } + +if (reg & ~S390_TOPO_FC_MASK ) { +s390_program_interrupt (env,PGM_SPECIFICATION , ra); +return 0 ; + } + +switch (fc) { +case 0 :/* Horizontal polarization is already set */ + env->regs[r1] |=S390_PTF_REASON_DONE ; +return 2 ; +case 1 :/* Vertical polarization is not supported */ + env->regs[r1] |=S390_PTF_REASON_NONE ; +return 2 ; +default : +/* Note that fc == 2 is interpreted by the SIE */ +s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return 0 ; +} +static void s390_machine_reset (MachineState *machine) {S390CcwMachineState *ms =S390_CCW_MACHINE (machine);
include/hw/s390x/s390-virtio-ccw.h +6 -0
@@ -30,6 +30,12 @@ struct S390CcwMachineState {uint8_t loadparm[8 ]; }; +#define S390_PTF_REASON_NONE (0x00 << 8) +#define S390_PTF_REASON_DONE (0x01 << 8) +#define S390_PTF_REASON_BUSY (0x02 << 8) +#define S390_TOPO_FC_MASK 0xffUL +int s390_handle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra); +struct S390CcwMachineClass {/*< private >*/ MachineClass parent_class;
target/s390x/kvm/kvm.c +14 -0
@@ -98,6 +98,7 @@#define PRIV_B9_EQBS 0x9c#define PRIV_B9_CLP 0xa0 +#define PRIV_B9_PTF 0xa2#define PRIV_B9_PCISTG 0xd0#define PRIV_B9_PCILG 0xd2#define PRIV_B9_RPCIT 0xd3
@@ -1453,6 +1454,16 @@ static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run) } } +static int kvm_handle_ptf (S390CPU *cpu,struct kvm_run *run) +{ +uint8_t r1 = (run->s390_sieic.ipb >>20 ) &0x0f ; +int ret; + + ret =s390_handle_ptf (cpu, r1,RA_IGNORED ); +setcc (cpu, ret); +return 0 ; +} +static int handle_b9 (S390CPU *cpu,struct kvm_run *run,uint8_t ipa1) {int r =0 ;
@@ -1470,6 +1481,9 @@ static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1)case PRIV_B9_RPCIT : r =kvm_rpcit_service_call (cpu, run);break ; +case PRIV_B9_PTF : + r =kvm_handle_ptf (cpu, run); +break ;case PRIV_B9_EQBS :/* just inject exception */ r =-1 ;
Signature · 1 line
2.27.0
Re: [PATCH v7 10/13] s390x: kvm: topology: interception of PTF instruction
hw/s390x/s390-virtio-ccw.c
Quoted 19 lines · Pierre Morel
When the host supports the CPU topology facility, the PTF instruction with function code 2 is interpreted by the SIE, provided that the userland hypervizor activates the interpretation by using the
KVM_CAP_S390_CPU_TOPOLOGYKVM extension.The PTF instructions with function code 0 and 1 are intercepted and must be emulated by the userland hypervizor.
Signed-off-by Pierre Morel <[email protected]>--- hw/s390x/s390-virtio-ccw.c | 50 ++++++++++++++++++++++++++++++ include/hw/s390x/s390-virtio-ccw.h | 6 ++++ target/s390x/kvm/kvm.c | 14 +++++++++ 3 files changed, 70 insertions(+)hw/s390x/s390-virtio-ccw.c +0
-0
Why do you put this into s390-virtio-ccw.c and not into cpu_topology.c ?
Quoted 87 lines
hw/s390x/s390-virtio-ccw.c +50
-0@@ -434,6 +434,56 @@ static void s390_pv_prepare_reset(S390CcwMachineState *ms)s390_pv_prep_reset (); } +/* +* s390_handle_ptf: +* +* @register 1: contains the function code +* +* Function codes 0 and 1 handle the CPU polarization. +* We assume an horizontal topology, the only one supported currently +* by Linux, consequently we answer to function code 0, requesting +* horizontal polarization that it is already the current polarization +* and reject vertical polarization request without further explanation. +* +* Function code 2 is handling topology changes and is interpreted +* by the SIE. +*/ +int s390_handle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra) +{ +CPUS390XState *env = &cpu->env; +uint64_t reg = env->regs[r1]; +uint8_t fc = reg &S390_TOPO_FC_MASK ; + +if (!s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY )) { +s390_program_interrupt (env,PGM_OPERATION , ra); +return 0 ; + } + +if (env->psw.mask &PSW_MASK_PSTATE ) { +s390_program_interrupt (env,PGM_PRIVILEGED , ra); +return 0 ; + } + +if (reg & ~S390_TOPO_FC_MASK ) { +s390_program_interrupt (env,PGM_SPECIFICATION , ra); +return 0 ; + } + +switch (fc) { +case 0 :/* Horizontal polarization is already set */ + env->regs[r1] |=S390_PTF_REASON_DONE ; +return 2 ; +case 1 :/* Vertical polarization is not supported */ + env->regs[r1] |=S390_PTF_REASON_NONE ; +return 2 ; +default : +/* Note that fc == 2 is interpreted by the SIE */ +s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return 0 ; +} +static void s390_machine_reset (MachineState *machine) {S390CcwMachineState *ms =S390_CCW_MACHINE (machine);include/hw/s390x/s390-virtio-ccw.h +6
-0@@ -30,6 +30,12 @@ struct S390CcwMachineState {uint8_t loadparm[8 ]; }; +#define S390_PTF_REASON_NONE (0x00 << 8) +#define S390_PTF_REASON_DONE (0x01 << 8) +#define S390_PTF_REASON_BUSY (0x02 << 8) +#define S390_TOPO_FC_MASK 0xffUL +int s390_handle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra); +struct S390CcwMachineClass {/*< private >*/ MachineClass parent_class;target/s390x/kvm/kvm.c +1
-0@@ -98,6 +98,7 @@#define PRIV_B9_EQBS 0x9c#define PRIV_B9_CLP 0xa0 +#define PRIV_B9_PTF 0xa2#define PRIV_B9_PCISTG 0xd0#define PRIV_B9_PCILG 0xd2#define PRIV_B9_RPCIT 0xd3
target/s390x/kvm/kvm.c static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run) · line 1463
Quoted 10 lines
target/s390x/kvm/kvm.c +7
-0@@ -1453,6 +1454,16 @@ static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run) } } +static int kvm_handle_ptf (S390CPU *cpu,struct kvm_run *run) +{ +uint8_t r1 = (run->s390_sieic.ipb >>20 ) &0x0f ; +int ret; + + ret =s390_handle_ptf (cpu, r1,RA_IGNORED ); +setcc (cpu, ret);
So you're still setting the CC in case the s390_handle_ptf() function injected a program interrupt? ... feels wrong. Maybe the CC should be set within s390_handle_ptf() instead?
Thomas
Quoted 16 lines
target/s390x/kvm/kvm.c +6
-0+return 0 ; +} +static int handle_b9 (S390CPU *cpu,struct kvm_run *run,uint8_t ipa1) {int r =0 ;@@ -1470,6 +1481,9 @@ static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1)case PRIV_B9_RPCIT : r =kvm_rpcit_service_call (cpu, run);break ; +case PRIV_B9_PTF : + r =kvm_handle_ptf (cpu, run); +break ;case PRIV_B9_EQBS :/* just inject exception */ r =-1 ;
Re: [PATCH v7 10/13] s390x: kvm: topology: interception of PTF instruction
Quoted 16 lines · Thomas Huth
Quoted 15 lines · Pierre Morel
When the host supports the CPU topology facility, the PTF instruction with function code 2 is interpreted by the SIE, provided that the userland hypervizor activates the interpretation by using the
KVM_CAP_S390_CPU_TOPOLOGYKVM extension.The PTF instructions with function code 0 and 1 are intercepted and must be emulated by the userland hypervizor.
Signed-off-by Pierre Morel <[email protected]>---
hw/s390x/s390-virtio-ccw.c | 50 ++++++++++++++++++++++++++++++include/hw/s390x/s390-virtio-ccw.h| 6 ++++ target/s390x/kvm/kvm.c | 14 +++++++++3 files changed, 70 insertions(+)
Quoted 6 lines
hw/s390x/s390-virtio-ccw.c
Quoted 4 lines
hw/s390x/s390-virtio-ccw.c +0
-0Why do you put this into
s390-virtio-ccw.cand not intocpu_topology.c?
Should have historical reason I forgot in between. I will move it in cpu_topology.c
Quoted 90 lines
Quoted 90 lines
hw/s390x/s390-virtio-ccw.c +50
-0@@ -434,6 +434,56 @@ static void s390_pv_prepare_reset(S390CcwMachineState *ms) s390_pv_prep_reset(); } +/* +* s390_handle_ptf: +* +* @register 1: contains the function code +* +* Function codes 0 and 1 handle the CPU polarization. +* We assume an horizontal topology, the only one supported currently +* by Linux, consequently we answer to function code 0, requesting +* horizontal polarization that it is already the current polarization +* and reject vertical polarization request without further explanation. +* +* Function code 2 is handling topology changes and is interpreted +* by the SIE. +*/ +int s390_has390_handle_ptfndle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra) +{ + CPUS390XState *env = &cpu->env; + uint64_t reg = env->regs[r1]; + uint8_t fc = reg & S390_TOPO_FC_MASK; + + if (!s390_has_feat(S390_FEAT_CONFIGURATION_TOPOLOGY)) { + s390_program_interrupt(env, PGM_OPERATION, ra); + return 0; + } + + if (env->psw.mask & PSW_MASK_PSTATE) { + s390_program_interrupt(env, PGM_PRIVILEGED, ra); + return 0; + } + + if (reg & ~S390_TOPO_FC_MASK) { + s390_program_interrupt(env, PGM_SPECIFICATION, ra); + return 0; + } + + switch (fc) { + case 0: /* Horizontal polarization is already set */ + env->regs[r1] |= S390_PTF_REASON_DONE; + return 2; + case 1: /* Vertical polarization is not supported */ + env->regs[r1] |= S390_PTF_REASON_NONE; + return 2; + default: + /* Note that fc == 2 is interpreted by the SIE */ + s390_program_interrupt(env, PGM_SPECIFICATION, ra); + } + + return 0; +} + static void s390_machine_reset(MachineState *machine) { S390CcwMachineState *ms = S390_CCW_MACHINE(machine);include/hw/s390x/s390-virtio-ccw.h +6
-0@@ -30,6 +30,12 @@ struct S390CcwMachineState { uint8_t loadparm[8]; }; +#define S390_PTF_REASON_NONE (0x00 << 8) +#define S390_PTF_REASON_DONE (0x01 << 8) +#define S390_PTF_REASON_BUSY (0x02 << 8) +#define S390_TOPO_FC_MASK 0xffUL +int s390_handle_ptf (S390CPU *cpu,uint8_t r1,uintptr_t ra); + struct S390CcwMachineClass { /*< private >*/ MachineClass parent_class;target/s390x/kvm/kvm.c +2
-0@@ -98,6 +98,7 @@ #define PRIV_B9_EQBS 0x9c #define PRIV_B9_CLP 0xa0 +#define PRIV_B9_PTF 0xa2 #define PRIV_B9_PCISTG 0xd0 #define PRIV_B9_PCILG 0xd2 #define PRIV_B9_RPCIT 0xd3@@ -1453,6 +1454,16 @@ static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run) } } +static int kvm_handle_ptf (S390CPU *cpu,struct kvm_run *run)
Quoted 8 lines
target/s390x/kvm/kvm.c static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run) · line 1463
Quoted 6 lines
target/s390x/kvm/kvm.c +6
-0+{ + uint8_t r1 = (run->s390_sieic.ipb >> 20) & 0x0f; + int ret; + + ret = s390_handle_ptf(cpu, r1, RA_IGNORED); + setcc(cpu, ret);So you're still setting the CC in case the
s390_handle_ptf()function injected a program interrupt? ... feels wrong. Maybe the CC should be set withins390_handle_ptf()instead?
OK, I will have a look and change it.
Thanks,
Pierre
Quoted 22 lines
Thomas
Quoted 17 lines
target/s390x/kvm/kvm.c +3
-0+ return 0; +} + static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1) { int r = 0;@@ -1470,6 +1481,9 @@ static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1)case
PRIV_B9_RPCIT:
r =kvm_rpcit_service_call(cpu, run);
break;
+ casePRIV_B9_PTF:
+ r =kvm_handle_ptf(cpu, run);
+ break;
casePRIV_B9_EQBS:
/* just inject exception */
r = -1;
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 11/13 s390x: topology: resetting the Topology-Change-Report
In reply to Pierre MorelDuring a subsystem reset the Topology-Change-Report is cleared. Let's ask KVM to clear the MTCR in the case of a subsystem reset.
--- hw/s390x/cpu-topology.c | 6 ++++++ hw/s390x/s390-virtio-ccw.c | 1 + target/s390x/cpu-sysemu.c | 7 +++++++ target/s390x/cpu.h | 1 + target/s390x/kvm/kvm.c | 31 +++++++++++++++++++++++++++++++ target/s390x/kvm/kvm_s390x.h | 2 ++ 6 files changed, 48 insertions(+)
hw/s390x/cpu-topology.c +6 -0
@@ -561,6 +561,11 @@ static void s390_node_device_realize(DeviceState *dev, Error **errp)qbus_set_hotplug_handler (bus,OBJECT (dev)); } +static void s390_topology_reset (DeviceState *dev) +{ +s390_cpu_topology_mtr_reset (); +} +static void node_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc);
@@ -570,6 +575,7 @@ static void node_class_init(ObjectClass *oc, void *data)set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); dc->realize = s390_node_device_realize; dc->desc ="topology node" ; + dc->reset = s390_topology_reset; }static const TypeInfo node_info = {
hw/s390x/s390-virtio-ccw.c +1 -0
@@ -121,6 +121,7 @@ static const char *const reset_dev_types[] = {"s390-flic" ,"diag288" ,TYPE_S390_PCI_HOST_BRIDGE , + TYPE_S390_TOPOLOGY_NODE, };static void subsystem_reset (void )
target/s390x/cpu-sysemu.c +7 -0
@@ -306,3 +306,10 @@ void s390_do_cpu_set_diag318(CPUState *cs, run_on_cpu_data arg)kvm_s390_set_diag318 (cs, arg.host_ulong); } } + +void s390_cpu_topology_mtr_reset (void ) +{ +if (kvm_enabled ()) { +kvm_s390_cpu_topology_reset (); + } +}
target/s390x/cpu.h +1 -0
@@ -825,6 +825,7 @@ void s390_enable_css_support(S390CPU *cpu);void s390_do_cpu_set_diag318 (CPUState *cs,run_on_cpu_data arg);int s390_assign_subch_ioeventfd (EventNotifier *notifier,uint32_t sch_id,int vq,bool assign); +void s390_cpu_topology_mtr_reset (void );#ifndef CONFIG_USER_ONLY unsigned int s390_cpu_set_state (uint8_t cpu_state,S390CPU *cpu);#else
target/s390x/kvm/kvm.c +31 -0
@@ -2585,3 +2585,34 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +static void kvm_s390_set_mtr (uint64_t attr) +{ +struct kvm_device_attr attribute = { + .group =KVM_S390_VM_CPU_TOPOLOGY , + .attr = attr, + }; + +int ret =kvm_vm_ioctl (kvm_state,KVM_SET_DEVICE_ATTR , &attribute); + +if (ret) { +error_report ("Failed to set cpu topology attribute %lu: %s" , + attr,strerror (-ret)); + } +} + +static void kvm_s390_reset_mtr (void ) +{ +uint64_t attr =KVM_S390_VM_CPU_TOPO_MTR_CLEAR ; + +if (kvm_vm_check_attr (kvm_state,KVM_S390_VM_CPU_TOPOLOGY , attr)) { +kvm_s390_set_mtr (attr); + } +} + +void kvm_s390_cpu_topology_reset (void ) +{ +if (s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY )) { +kvm_s390_reset_mtr (); + } +}
target/s390x/kvm/kvm_s390x.h +2 -0
@@ -46,4 +46,6 @@ void kvm_s390_restart_interrupt(S390CPU *cpu);void kvm_s390_stop_interrupt (S390CPU *cpu);void kvm_s390_set_diag318 (CPUState *cs,uint64_t diag318_info); +void kvm_s390_cpu_topology_reset (void ); +#endif /* KVM_S390X_H */
Signature · 1 line
2.27.0
PATCH v7 12/13 s390x: CPU topology: CPU topology migration
In reply to Pierre MorelTo migrate the Multiple Topology Change report, MTCR, we get it from KVM and save its state in the topology VM State Description during the presave and restore it to KVM on the destination during the postload.
The migration state is needed whenever the CPU topology feature is activated.
--- hw/s390x/cpu-topology.c | 42 ++++++++++++++++++++++++++++++++ include/hw/s390x/cpu-topology.h | 2 ++ target/s390x/cpu.h | 2 ++ target/s390x/cpu_models.c | 1 + target/s390x/kvm/kvm.c | 43 ++++++++++++++++++++++++++++++--- 5 files changed, 87 insertions(+), 3 deletions(-)
hw/s390x/cpu-topology.c +42 -0
@@ -19,6 +19,8 @@#include "qemu/typedefs.h" #include "target/s390x/cpu.h" #include "hw/s390x/s390-virtio-ccw.h" +#include "migration/vmstate.h" +#include "qemu/error-report.h" static S390TopologyCores *s390_create_cores (S390TopologySocket *socket,int origin)
@@ -566,6 +568,45 @@ static void s390_topology_reset(DeviceState *dev)s390_cpu_topology_mtr_reset (); } +static int cpu_topology_postload (void *opaque,int version_id) +{ +S390TopologyNode *node = opaque; + +if (node->topology_needed !=s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY )) { +return -EINVAL ; + } + +return s390_cpu_topology_mtcr_set (node->mtcr); +} + +static int cpu_topology_presave (void *opaque) +{ +S390TopologyNode *node = opaque; + + node->topology_needed =s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY ); +return s390_cpu_topology_mtcr_get (&node->mtcr); +} + +static bool cpu_topology_needed (void *opaque) +{ +return s390_has_feat (S390_FEAT_CONFIGURATION_TOPOLOGY ); +} + + +const VMStateDescription vmstate_cpu_topology = { + .name ="cpu_topology" , + .version_id =1 , + .pre_save = cpu_topology_presave, + .post_load = cpu_topology_postload, + .minimum_version_id =1 , + .needed = cpu_topology_needed, + .fields = (VMStateField []) { +VMSTATE_UINT16 (mtcr, S390TopologyNode), +VMSTATE_BOOL (topology_needed, S390TopologyNode), +VMSTATE_END_OF_LIST () + } +}; +static void node_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc);
@@ -576,6 +617,7 @@ static void node_class_init(ObjectClass *oc, void *data) dc->realize = s390_node_device_realize; dc->desc ="topology node" ; dc->reset = s390_topology_reset; + dc->vmsd = &vmstate_cpu_topology; }static const TypeInfo node_info = {
include/hw/s390x/cpu-topology.h +2 -0
@@ -84,6 +84,8 @@ struct S390TopologyNode {BusState *bus;uint8_t node_id;int cnt; +uint16_t mtcr; +bool topology_needed; };typedef struct S390TopologyNode S390TopologyNode ;OBJECT_DECLARE_SIMPLE_TYPE (S390TopologyNode,S390_TOPOLOGY_NODE )
target/s390x/cpu.h +2 -0
@@ -826,6 +826,8 @@ void s390_do_cpu_set_diag318(CPUState *cs, run_on_cpu_data arg);int s390_assign_subch_ioeventfd (EventNotifier *notifier,uint32_t sch_id,int vq,bool assign);void s390_cpu_topology_mtr_reset (void ); +int s390_cpu_topology_mtcr_set (uint16_t mtcr); +int s390_cpu_topology_mtcr_get (uint16_t *mtcr);#ifndef CONFIG_USER_ONLY unsigned int s390_cpu_set_state (uint8_t cpu_state,S390CPU *cpu);#else
target/s390x/cpu_models.c +1 -0
@@ -254,6 +254,7 @@ bool s390_has_feat(S390Feat feat)case S390_FEAT_SIE_CMMA :case S390_FEAT_SIE_PFMFI :case S390_FEAT_SIE_IBS : +case S390_FEAT_CONFIGURATION_TOPOLOGY :return false;break ;default :
target/s390x/kvm/kvm.c +40 -3
68 lines not on this page · raw message
Signature · 1 line
2.27.0
Re: [PATCH v7 12/13] s390x: CPU topology: CPU topology migration
Quoted 10 lines · Pierre Morel
To migrate the Multiple Topology Change report, MTCR, we get it from KVM and save its state in the topology VM State Description during the presave and restore it to KVM on the destination during the postload.
The migration state is needed whenever the CPU topology feature is activated.
Signed-off-by Pierre Morel <[email protected]>---
...
target/s390x/kvm/kvm.c static void kvm_s390_set_mtr(uint64_t attr) · line 2599
Quoted 9 lines
target/s390x/kvm/kvm.c +2
-2@@ -2592,22 +2594,57 @@ static void kvm_s390_set_mtr(uint64_t attr) .group = KVM_S390_VM_CPU_TOPOLOGY, .attr = attr, }; +int ret; -int ret =kvm_vm_ioctl (kvm_state,KVM_SET_DEVICE_ATTR , &attribute); - + ret =kvm_vm_ioctl (kvm_state,KVM_SET_DEVICE_ATTR , &attribute);
Nit: Unnecessary code churn.
Thomas
Re: [PATCH v7 12/13] s390x: CPU topology: CPU topology migration
Quoted 12 lines · Thomas Huth
Quoted 10 lines · Pierre Morel
To migrate the Multiple Topology Change report, MTCR, we get it from KVM and save its state in the topology VM State Description during the presave and restore it to KVM on the destination during the postload.
The migration state is needed whenever the CPU topology feature is activated.
Signed-off-by Pierre Morel <[email protected]>---
...
Quoted 10 lines
target/s390x/kvm/kvm.c static void kvm_s390_set_mtr(uint64_t attr) · line 2598
Quoted 8 lines
target/s390x/kvm/kvm.c +2
-2@@ -2592,22 +2594,57 @@ static void kvm_s390_set_mtr(uint64_t attr) .group = KVM_S390_VM_CPU_TOPOLOGY, .attr = attr, }; + int ret; - int ret = kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attribute); - + ret = kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attribute);Nit: Unnecessary code churn.
yes thanks,
Pierre
Quoted 3 lines
Thomas
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v7 13/13 s390x: topology: activating CPU topology
In reply to Pierre Morel--- target/s390x/kvm/kvm.c | 9 +++++++++ 1 file changed, 9 insertions(+)
target/s390x/kvm/kvm.c +9 -0
@@ -366,6 +366,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)kvm_vm_enable_cap (s,KVM_CAP_S390_USER_SIGP ,0 );kvm_vm_enable_cap (s,KVM_CAP_S390_VECTOR_REGISTERS ,0 );kvm_vm_enable_cap (s,KVM_CAP_S390_USER_STSI ,0 ); +kvm_vm_enable_cap (s,KVM_CAP_S390_CPU_TOPOLOGY ,0 );if (ri_allowed ()) {if (kvm_vm_enable_cap (s,KVM_CAP_S390_RI ,0 ) ==0 ) { cap_ri =1 ;
@@ -2460,6 +2461,14 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp)set_bit (S390_FEAT_UNPACK , model->features); } +/* +* If we have the CPU Topology implemented in KVM activate +* the CPU TOPOLOGY feature. +*/ +if (kvm_check_extension (kvm_state,KVM_CAP_S390_CPU_TOPOLOGY )) { +set_bit (S390_FEAT_CONFIGURATION_TOPOLOGY , model->features); + } +/* We emulate a zPCI bus and AEN, therefore we don't need HW support */ set_bit (S390_FEAT_ZPCI , model->features);set_bit (S390_FEAT_ADAPTER_EVENT_NOTIFICATION , model->features);
Signature · 1 line
2.27.0