Skip to contentSkip to conversation

ram: k3-ddrss: Allow use of dt provided initial frequency

PATCH In review Dave Gerlach 2 participants 5 messages Apr 8, 2022 – Apr 20, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ram: k3-ddrss: Allow use of dt provided initial frequency

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR frequency that is set for lpddr4 before initialization of the controller. Make this optional and continue to use PLL bypass frequency as is done currently if ti,ddr-freq0 is not provided.

---
 .../memory-controller/k3-j721e-ddrss.txt          |  2 ++
 drivers/ram/k3-ddrss/k3-ddrss.c                   | 15 ++++++++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)
doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt +2 -0
index df3290a6b9d9..1ea0a701143e 100644
@@ -39,6 +39,8 @@ Optional properties:
 - reg:			Must add "ss" to list if the above ss region is included.
 - ti,ecc-enable:	Boolean flag to enable ECC. This will reduce available DDR
 			by 1/9.
+- ti,ddr-freq0:		Initial frequency set point, if not provided PLL bypass
+			frequency will be used.
 
 Example (J721E):
 ================
drivers/ram/k3-ddrss/k3-ddrss.c +10 -5
index 2467f122a829..5c29e31a6f30 100644
@@ -134,6 +134,7 @@ struct k3_ddrss_desc {
 	struct power_domain ddrdata_pwrdmn;
 	struct clk ddr_clk;
 	struct clk osc_clk;
+	u32 ddr_freq0;
 	u32 ddr_freq1;
 	u32 ddr_freq2;
 	u32 ddr_fhs_cnt;
@@ -223,9 +224,7 @@ static void k3_lpddr4_freq_update(struct k3_ddrss_desc *ddrss)
 		else if (req_type == 2)
 			clk_set_rate(&ddrss->ddr_clk, ddrss->ddr_freq2);
 		else if (req_type == 0)
-			/* Put DDR pll in bypass mode */
-			clk_set_rate(&ddrss->ddr_clk,
-				     clk_get_rate(&ddrss->osc_clk));
+			clk_set_rate(&ddrss->ddr_clk, ddrss->ddr_freq0);
 		else
 			printf("%s: Invalid freq request type\n", __func__);
 
@@ -276,8 +275,7 @@ static int k3_ddrss_init_freq(struct k3_ddrss_desc *ddrss)
 		ret = clk_set_rate(&ddrss->ddr_clk, ddrss->ddr_freq1);
 		break;
 	case DENALI_CTL_0_DRAM_CLASS_LPDDR4:
-		/* Set to bypass frequency for LPDDR4*/
-		ret = clk_set_rate(&ddrss->ddr_clk, clk_get_rate(&ddrss->osc_clk));
+		ret = clk_set_rate(&ddrss->ddr_clk, ddrss->ddr_freq0);
 		break;
 	default:
 		ret = -EINVAL;
@@ -394,6 +392,13 @@ static int k3_ddrss_ofdata_to_priv(struct udevice *dev)
 		ddrss->instance = 0;
 	}
 
+	ret = dev_read_u32(dev, "ti,ddr-freq0", &ddrss->ddr_freq0);
+	if (ret) {
+		ddrss->ddr_freq0 = clk_get_rate(&ddrss->osc_clk);
+		dev_dbg(dev,
+			"ddr freq0 not populated, using bypass frequency.\n");
+	}
+
 	ret = dev_read_u32(dev, "ti,ddr-freq1", &ddrss->ddr_freq1);
 	if (ret)
 		dev_err(dev, "ddr freq1 not populated %d\n", ret);
Signature · 1 line
2.35.0
#1 lore raw
Quoted 10 lines · Dave Gerlach

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR frequency that is set for lpddr4 before initialization of the controller. Make this optional and continue to use PLL bypass frequency as is done currently if ti,ddr-freq0 is not provided.

---
 .../memory-controller/k3-j721e-ddrss.txt          |  2 ++
 drivers/ram/k3-ddrss/k3-ddrss.c                   | 15 ++++++++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)

What's the status of getting this binding upstreamed? I forget if this is one I've asked about before or not. Thanks.

Signature · 1 line
Tom
#2 lore raw

Hi,

Quoted 7 lines · Tom Rini
Quoted 5 lines · Dave Gerlach

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR frequency that is set for lpddr4 before initialization of the controller. Make this optional and continue to use PLL bypass frequency as is done currently if ti,ddr-freq0 is not provided.

Quoted 9 lines
Quoted 5 lines
---
 .../memory-controller/k3-j721e-ddrss.txt          |  2 ++
 drivers/ram/k3-ddrss/k3-ddrss.c                   | 15 ++++++++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)

What's the status of getting this binding upstreamed? I forget if this is one I've asked about before or not. Thanks.

I am pretty sure nobody is looking at this one, but I'd be happy to take it up.

Regards,
Dave

#3 lore raw
Quoted 16 lines · Dave Gerlach

Hi,

Quoted 13 lines · Tom Rini
Quoted 10 lines · Dave Gerlach

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR frequency that is set for lpddr4 before initialization of the controller. Make this optional and continue to use PLL bypass frequency as is done currently if ti,ddr-freq0 is not provided.

---
 .../memory-controller/k3-j721e-ddrss.txt          |  2 ++
 drivers/ram/k3-ddrss/k3-ddrss.c                   | 15 ++++++++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)
Quoted 5 lines
Quoted 2 lines

What's the status of getting this binding upstreamed? I forget if this is one I've asked about before or not. Thanks.

I am pretty sure nobody is looking at this one, but I'd be happy to take it up.

Great, thanks!

Signature · 1 line
Tom
#4 lore raw
In reply to Dave Gerlach
Quoted 6 lines · Dave Gerlach

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR frequency that is set for lpddr4 before initialization of the controller. Make this optional and continue to use PLL bypass frequency as is done currently if ti,ddr-freq0 is not provided.

Applied to u-boot/master, thanks!

Signature · 1 line
Tom