Skip to contentSkip to conversation

verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

PATCH In review Philippe Schenker 3 participants 3 messages Apr 21, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

From: Philippe Schenker <[email protected]>

systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly.

---

 include/configs/verdin-imx8mm.h | 4 ++--
 include/configs/verdin-imx8mp.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/verdin-imx8mm.h +2 -2
index 6c5b190dd9..1c8f8f6358 100644
@@ -63,8 +63,8 @@
 	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} " \
-		"console=tty1 consoleblank=0 earlycon\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
include/configs/verdin-imx8mp.h +1 -1
index 9e29dc1903..076a70d2bf 100644
@@ -82,7 +82,7 @@
 	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
Signature · 1 line
2.35.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 37 lines · Philippe Schenker

From: Philippe Schenker <[email protected]>

systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly.

---

  include/configs/verdin-imx8mm.h | 4 ++--
  include/configs/verdin-imx8mp.h | 2 +-
  2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/verdin-imx8mm.h +2 -2
index 6c5b190dd9..1c8f8f6358 100644
@@ -63,8 +63,8 @@
  	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
  		"tftp ${fdt_addr} verdin/${fdtfile}; " \
  		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} " \
-		"console=tty1 consoleblank=0 earlycon\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
  	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
  		"if test \"$confirm\" = \"y\"; then " \
  		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
include/configs/verdin-imx8mp.h +0 -0
index 9e29dc1903..076a70d2bf 100644

include/configs/verdin-imx8mp.h line 88

Quoted 8 lines
include/configs/verdin-imx8mp.h +1 -1
@@ -82,7 +82,7 @@
  	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
  		"tftp ${fdt_addr} verdin/${fdtfile}; " \
  		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
  		"consoleblank=0 earlycon\0" \
  	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
  		"if test \"$confirm\" = \"y\"; then " \

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
Acked-by on v1 1/1
#2 lore raw
In reply to Philippe Schenker
Quoted 10 lines · Philippe Schenker

From: Philippe Schenker <[email protected]>

systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly.

Quoted 34 lines

---

 include/configs/verdin-imx8mm.h | 4 ++--
 include/configs/verdin-imx8mp.h | 2 +-

 2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/verdin-imx8mm.h +2 -2
index 6c5b190dd9..1c8f8f6358 100644
@@ -63,8 +63,8 @@
         "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
                 "tftp ${fdt_addr} verdin/${fdtfile}; " \
                 "booti ${loadaddr} - ${fdt_addr}\0" \
-       "setup=setenv setupargs console=${console},${baudrate} " \
-               "console=tty1 consoleblank=0 earlycon\0" \
+       "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+               "consoleblank=0 earlycon\0" \
         "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
                 "if test \"$confirm\" = \"y\"; then " \
                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
include/configs/verdin-imx8mp.h +1 -1
index 9e29dc1903..076a70d2bf 100644
@@ -82,7 +82,7 @@
         "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
                 "tftp ${fdt_addr} verdin/${fdtfile}; " \
                 "booti ${loadaddr} - ${fdt_addr}\0" \
-       "setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+       "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
                 "consoleblank=0 earlycon\0" \
         "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
                 "if test \"$confirm\" = \"y\"; then " \