Skip to contentSkip to conversation

power-domain: Return 0 if ops unimplemented and remove empty functions

PATCH New Marek Vasut 2 participants 20 messages Apr 12, 2022 – Apr 21, 2022

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/10 power-domain: Return 0 if ops unimplemented and remove empty functions

In case the ops is not implemented, return 0 in the core right away. This is better than having multiple copies of functions which just return 0 in each power domain driver. Drop all those empty functions.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>

---
V2: Skipped to align the Vx scheme
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/apple-pmgr.c             | 30 -------------------
 drivers/power/domain/bcm6328-power-domain.c   |  6 ----
 .../power/domain/imx8-power-domain-legacy.c   | 16 ----------
 drivers/power/domain/imx8-power-domain.c      | 24 ---------------
 drivers/power/domain/imx8m-power-domain.c     | 18 -----------
 drivers/power/domain/meson-ee-pwrc.c          | 12 --------
 drivers/power/domain/meson-gx-pwrc-vpu.c      | 12 --------
 drivers/power/domain/mtk-power-domain.c       |  6 ----
 drivers/power/domain/power-domain-uclass.c    |  8 ++---
 drivers/power/domain/tegra186-power-domain.c  | 26 ----------------
 drivers/power/domain/ti-power-domain.c        | 13 --------
 drivers/power/domain/ti-sci-power-domain.c    | 14 ---------
 12 files changed, 4 insertions(+), 181 deletions(-)
drivers/power/domain/apple-pmgr.c +0 -30
index 4d06e76ff5e..402c5b1fd18 100644
@@ -42,16 +42,6 @@ static int apple_reset_of_xlate(struct reset_ctl *reset_ctl,
 	return 0;
 }
 
-static int apple_reset_request(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
-static int apple_reset_free(struct reset_ctl *reset_ctl)
-{
-	return 0;
-}
-
 static int apple_reset_assert(struct reset_ctl *reset_ctl)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(reset_ctl->dev->parent);
@@ -80,8 +70,6 @@ static int apple_reset_deassert(struct reset_ctl *reset_ctl)
 
 struct reset_ops apple_reset_ops = {
 	.of_xlate = apple_reset_of_xlate,
-	.request = apple_reset_request,
-	.rfree = apple_reset_free,
 	.rst_assert = apple_reset_assert,
 	.rst_deassert = apple_reset_deassert,
 };
@@ -92,16 +80,6 @@ static struct driver apple_reset_driver = {
 	.ops = &apple_reset_ops,
 };
 
-static int apple_pmgr_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int apple_pmgr_rfree(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_ps_set(struct power_domain *power_domain, u32 pstate)
 {
 	struct apple_pmgr_priv *priv = dev_get_priv(power_domain->dev);
@@ -121,11 +99,6 @@ static int apple_pmgr_on(struct power_domain *power_domain)
 	return apple_pmgr_ps_set(power_domain, APPLE_PMGR_PS_ACTIVE);
 }
 
-static int apple_pmgr_off(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int apple_pmgr_of_xlate(struct power_domain *power_domain,
 			       struct ofnode_phandle_args *args)
 {
@@ -167,10 +140,7 @@ static int apple_pmgr_probe(struct udevice *dev)
 }
 
 struct power_domain_ops apple_pmgr_ops = {
-	.request = apple_pmgr_request,
-	.rfree = apple_pmgr_rfree,
 	.on = apple_pmgr_on,
-	.off = apple_pmgr_off,
 	.of_xlate = apple_pmgr_of_xlate,
 };
 
drivers/power/domain/bcm6328-power-domain.c +0 -6
index 6e720e0798c..80144dd9772 100644
@@ -24,11 +24,6 @@ static int bcm6328_power_domain_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int bcm6328_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int bcm6328_power_domain_on(struct power_domain *power_domain)
 {
 	struct bcm6328_power_domain *priv = dev_get_priv(power_domain->dev);
@@ -64,7 +59,6 @@ static const struct udevice_id bcm6328_power_domain_ids[] = {
 };
 
 struct power_domain_ops bcm6328_power_domain_ops = {
-	.rfree = bcm6328_power_domain_free,
 	.off = bcm6328_power_domain_off,
 	.on = bcm6328_power_domain_on,
 	.request = bcm6328_power_domain_request,
drivers/power/domain/imx8-power-domain-legacy.c +0 -16
index e2fae2dbc86..bf45891bccd 100644
@@ -84,20 +84,6 @@ int imx8_power_domain_lookup_name(const char *name,
 	return 0;
 }
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -364,8 +350,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 	.of_xlate = imx8_power_domain_of_xlate,
drivers/power/domain/imx8-power-domain.c +0 -24
index 6461ab23d62..17b5d57b19b 100644
@@ -12,20 +12,6 @@
 #include <asm/arch/power-domain.h>
 #include <asm/arch/sci/sci.h>
 
-static int imx8_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
-static int imx8_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p)\n", __func__, power_domain);
-
-	return 0;
-}
-
 static int imx8_power_domain_on(struct power_domain *power_domain)
 {
 	u32 resource_id = power_domain->id;
@@ -60,13 +46,6 @@ static int imx8_power_domain_off(struct power_domain *power_domain)
 	return 0;
 }
 
-static int imx8_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%s)\n", __func__, dev->name);
-
-	return 0;
-}
-
 static const struct udevice_id imx8_power_domain_ids[] = {
 	{ .compatible = "fsl,imx8qxp-scu-pd" },
 	{ .compatible = "fsl,scu-pd" },
@@ -74,8 +53,6 @@ static const struct udevice_id imx8_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8_power_domain_ops_v2 = {
-	.request = imx8_power_domain_request,
-	.rfree = imx8_power_domain_free,
 	.on = imx8_power_domain_on,
 	.off = imx8_power_domain_off,
 };
@@ -84,6 +61,5 @@ U_BOOT_DRIVER(imx8_power_domain_v2) = {
 	.name = "imx8_power_domain_v2",
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8_power_domain_ids,
-	.probe = imx8_power_domain_probe,
 	.ops = &imx8_power_domain_ops_v2,
 };
drivers/power/domain/imx8m-power-domain.c +0 -18
index 5d34bc12902..6082ee6ff8c 100644
@@ -18,16 +18,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int imx8m_power_domain_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int imx8m_power_domain_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -100,11 +90,6 @@ static int imx8m_power_domain_bind(struct udevice *dev)
 	return 0;
 }
 
-static int imx8m_power_domain_probe(struct udevice *dev)
-{
-	return 0;
-}
-
 static int imx8m_power_domain_of_to_plat(struct udevice *dev)
 {
 	struct imx8m_power_domain_plat *pdata = dev_get_plat(dev);
@@ -126,8 +111,6 @@ static const struct udevice_id imx8m_power_domain_ids[] = {
 };
 
 struct power_domain_ops imx8m_power_domain_ops = {
-	.request = imx8m_power_domain_request,
-	.rfree = imx8m_power_domain_free,
 	.on = imx8m_power_domain_on,
 	.off = imx8m_power_domain_off,
 	.of_xlate = imx8m_power_domain_of_xlate,
@@ -138,7 +121,6 @@ U_BOOT_DRIVER(imx8m_power_domain) = {
 	.id = UCLASS_POWER_DOMAIN,
 	.of_match = imx8m_power_domain_ids,
 	.bind = imx8m_power_domain_bind,
-	.probe = imx8m_power_domain_probe,
 	.of_to_plat = imx8m_power_domain_of_to_plat,
 	.plat_auto	= sizeof(struct imx8m_power_domain_plat),
 	.ops = &imx8m_power_domain_ops,
drivers/power/domain/meson-ee-pwrc.c +0 -12
index a4d50e701ae..676fded8080 100644
@@ -273,16 +273,6 @@ static bool pwrc_ee_get_power(struct power_domain *power_domain)
 	return (reg & pwrc_domain->top_pd->sleep_mask);
 }
 
-static int meson_ee_pwrc_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_ee_pwrc_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_ee_pwrc_off(struct power_domain *power_domain)
 {
 	struct meson_ee_pwrc_priv *priv = dev_get_priv(power_domain->dev);
@@ -387,10 +377,8 @@ static int meson_ee_pwrc_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_ee_pwrc_ops = {
-	.rfree = meson_ee_pwrc_free,
 	.off = meson_ee_pwrc_off,
 	.on = meson_ee_pwrc_on,
-	.request = meson_ee_pwrc_request,
 	.of_xlate = meson_ee_pwrc_of_xlate,
 };
 
drivers/power/domain/meson-gx-pwrc-vpu.c +0 -12
index eb94af2cf83..612660ce89f 100644
@@ -45,16 +45,6 @@ struct meson_gx_pwrc_vpu_priv {
 	struct clk_bulk clks;
 };
 
-static int meson_pwrc_vpu_request(struct power_domain *power_domain)
-{
-	return 0;
-}
-
-static int meson_pwrc_vpu_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int meson_gx_pwrc_vpu_on(struct power_domain *power_domain)
 {
 	struct meson_gx_pwrc_vpu_priv *priv = dev_get_priv(power_domain->dev);
@@ -274,10 +264,8 @@ static int meson_pwrc_vpu_of_xlate(struct power_domain *power_domain,
 }
 
 struct power_domain_ops meson_gx_pwrc_vpu_ops = {
-	.rfree = meson_pwrc_vpu_free,
 	.off = meson_pwrc_vpu_off,
 	.on = meson_pwrc_vpu_on,
-	.request = meson_pwrc_vpu_request,
 	.of_xlate = meson_pwrc_vpu_of_xlate,
 };
 
drivers/power/domain/mtk-power-domain.c +0 -6
index ca2ded00efa..3b84147d481 100644
@@ -317,11 +317,6 @@ static int scpsys_power_request(struct power_domain *power_domain)
 	return 0;
 }
 
-static int scpsys_power_free(struct power_domain *power_domain)
-{
-	return 0;
-}
-
 static int mtk_power_domain_hook(struct udevice *dev)
 {
 	struct scp_domain *scpd = dev_get_priv(dev);
@@ -399,7 +394,6 @@ static const struct udevice_id mtk_power_domain_ids[] = {
 };
 
 struct power_domain_ops mtk_power_domain_ops = {
-	.rfree = scpsys_power_free,
 	.off = scpsys_power_off,
 	.on = scpsys_power_on,
 	.request = scpsys_power_request,
drivers/power/domain/power-domain-uclass.c +4 -4
index 33f9206bd09..0c5823ceddf 100644
@@ -71,7 +71,7 @@ int power_domain_get_by_index(struct udevice *dev,
 		return ret;
 	}
 
-	ret = ops->request(power_domain);
+	ret = ops->request ? ops->request(power_domain) : 0;
 	if (ret) {
 		debug("ops->request() failed: %d\n", ret);
 		return ret;
@@ -91,7 +91,7 @@ int power_domain_free(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->rfree(power_domain);
+	return ops->rfree ? ops->rfree(power_domain) : 0;
 }
 
 int power_domain_on(struct power_domain *power_domain)
@@ -100,7 +100,7 @@ int power_domain_on(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->on(power_domain);
+	return ops->on ? ops->on(power_domain) : 0;
 }
 
 int power_domain_off(struct power_domain *power_domain)
@@ -109,7 +109,7 @@ int power_domain_off(struct power_domain *power_domain)
 
 	debug("%s(power_domain=%p)\n", __func__, power_domain);
 
-	return ops->off(power_domain);
+	return ops->off ? ops->off(power_domain) : 0;
 }
 
 #if CONFIG_IS_ENABLED(OF_REAL)
drivers/power/domain/tegra186-power-domain.c +0 -26
index 707735cf851..46da541b75a 100644
@@ -15,22 +15,6 @@
 #define UPDATE	BIT(0)
 #define ON	BIT(1)
 
-static int tegra186_power_domain_request(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
-static int tegra186_power_domain_free(struct power_domain *power_domain)
-{
-	debug("%s(power_domain=%p) (dev=%p, id=%lu)\n", __func__,
-	      power_domain, power_domain->dev, power_domain->id);
-
-	return 0;
-}
-
 static int tegra186_power_domain_common(struct power_domain *power_domain,
 					bool on)
 {
@@ -73,22 +57,12 @@ static int tegra186_power_domain_off(struct power_domain *power_domain)
 }
 
 struct power_domain_ops tegra186_power_domain_ops = {
-	.request = tegra186_power_domain_request,
-	.rfree = tegra186_power_domain_free,
 	.on = tegra186_power_domain_on,
 	.off = tegra186_power_domain_off,
 };
 
-static int tegra186_power_domain_probe(struct udevice *dev)
-{
-	debug("%s(dev=%p)\n", __func__, dev);
-
-	return 0;
-}
-
 U_BOOT_DRIVER(tegra186_power_domain) = {
 	.name = "tegra186_power_domain",
 	.id = UCLASS_POWER_DOMAIN,
-	.probe = tegra186_power_domain_probe,
 	.ops = &tegra186_power_domain_ops,
 };
drivers/power/domain/ti-power-domain.c +0 -13
index a7dadf2eea7..89e229b36f3 100644
@@ -339,17 +339,6 @@ static int ti_power_domain_of_xlate(struct power_domain *pd,
 
 	return 0;
 }
-
-static int ti_power_domain_request(struct power_domain *pd)
-{
-	return 0;
-}
-
-static int ti_power_domain_free(struct power_domain *pd)
-{
-	return 0;
-}
-
 static const struct udevice_id ti_power_domain_of_match[] = {
 	{ .compatible = "ti,sci-pm-domain" },
 	{ /* sentinel */ }
@@ -359,8 +348,6 @@ static struct power_domain_ops ti_power_domain_ops = {
 	.on = ti_power_domain_on,
 	.off = ti_power_domain_off,
 	.of_xlate = ti_power_domain_of_xlate,
-	.request = ti_power_domain_request,
-	.rfree = ti_power_domain_free,
 };
 
 U_BOOT_DRIVER(ti_pm_domains) = {
drivers/power/domain/ti-sci-power-domain.c +0 -14
index f18e45617a1..0140e5e5217 100644
@@ -44,18 +44,6 @@ static int ti_sci_power_domain_probe(struct udevice *dev)
 	return 0;
 }
 
-static int ti_sci_power_domain_request(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
-static int ti_sci_power_domain_free(struct power_domain *pd)
-{
-	debug("%s(pd=%p)\n", __func__, pd);
-	return 0;
-}
-
 static int ti_sci_power_domain_on(struct power_domain *pd)
 {
 	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
@@ -123,8 +111,6 @@ static const struct udevice_id ti_sci_power_domain_of_match[] = {
 };
 
 static struct power_domain_ops ti_sci_power_domain_ops = {
-	.request = ti_sci_power_domain_request,
-	.rfree = ti_sci_power_domain_free,
 	.on = ti_sci_power_domain_on,
 	.off = ti_sci_power_domain_off,
 	.of_xlate = ti_sci_power_domain_of_xlate,
Signature · 1 line
2.35.1
#1 lore raw

PATCH v4 2/10 imx: power-domain: Descend into pgc subnode if present

In case the power domain node structure is gpc@303a0000/pgc/power-domain@N, do not bind power domain driver to the 'pgc' node, but rather descend into it and only bind power domain drivers to power-domain@N subnodes. This way we do not waste one useless driver instance associated with 'pgc' node.

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/imx8m-power-domain.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/power/domain/imx8m-power-domain.c +6 -0
index 6082ee6ff8c..ac7411f8327 100644
@@ -73,6 +73,12 @@ static int imx8m_power_domain_bind(struct udevice *dev)
 		/* Bind the subnode to this driver */
 		name = fdt_get_name(gd->fdt_blob, offset, NULL);
 
+		/* Descend into 'pgc' subnode */
+		if (!strstr(name, "power-domain")) {
+			offset = fdt_first_subnode(gd->fdt_blob, offset);
+			name = fdt_get_name(gd->fdt_blob, offset, NULL);
+		}
+
 		ret = device_bind_with_driver_data(dev, dev->driver, name,
 						   dev->driver_data,
 						   offset_to_ofnode(offset),
Signature · 1 line
2.35.1
#2 lore raw

PATCH v4 2/10 imx: power-domain: Descend into pgc subnode if present

Quoted 9 lines

In case the power domain node structure is gpc@303a0000/pgc/power-domain@N, do not bind power domain driver to the 'pgc' node, but rather descend into it and only bind power domain drivers to power-domain@N subnodes. This way we do not waste one useless driver instance associated with 'pgc' node.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#3 lore raw

PATCH v4 3/10 imx: power-domain: Inline arch-imx8m/power-domain.h

In reply to Marek Vasut

The arch/arm/include/asm/arch-imx8m/power-domain.h is not included anywhere except in drivers/power/domain/imx8m-power-domain.c, just inline the content and drop the header. No functional change.

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 arch/arm/include/asm/arch-imx8m/power-domain.h | 15 ---------------
 drivers/power/domain/imx8m-power-domain.c      |  7 ++++++-
 2 files changed, 6 insertions(+), 16 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-imx8m/power-domain.h
arch/arm/include/asm/arch-imx8m/power-domain.h deleted +0 -15
deleted file mode 100644
index 7a833e564b5..00000000000
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2017 NXP
- */
-
-#ifndef _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-#define _ASM_ARCH_IMX8M_POWER_DOMAIN_H
-
-struct imx8m_power_domain_plat {
-	int resource_id;
-	int has_pd;
-	struct power_domain pd;
-};
-
-#endif
drivers/power/domain/imx8m-power-domain.c +6 -1
index ac7411f8327..c32dbcc31ae 100644
@@ -9,7 +9,6 @@
 #include <power-domain-uclass.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
-#include <asm/arch/power-domain.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <dm/device-internal.h>
 #include <dm/device.h>
@@ -18,6 +17,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+struct imx8m_power_domain_plat {
+	int resource_id;
+	int has_pd;
+	struct power_domain pd;
+};
+
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
Signature · 1 line
2.35.1
#4 lore raw

PATCH v4 3/10 imx: power-domain: Inline arch-imx8m/power-domain.h

Quoted 8 lines

The arch/arm/include/asm/arch-imx8m/power-domain.h is not included anywhere except in drivers/power/domain/imx8m-power-domain.c, just inline the content and drop the header. No functional change.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#5 lore raw

PATCH v4 4/10 imx: power-domain: Get rid of SMCCC dependency

In reply to Marek Vasut

This driver is the only SMCCC dependency in iMX8M U-Boot port. Rework the driver based on Linux GPCv2 driver to directly control the GPCv2 block instead of using SMCCC calls. This way, U-Boot can operate the i.MX8M power domains without depending on anything else.

This is losely based on Linux GPCv2 driver. The GPU, VPU, MIPI power domains are not supported to save space, since they are not useful in the bootloader. The only domains kept are ones for HSIO, PCIe, USB.

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/Kconfig              |   1 +
 drivers/power/domain/imx8m-power-domain.c | 379 ++++++++++++++++++++--
 2 files changed, 361 insertions(+), 19 deletions(-)
drivers/power/domain/Kconfig +1 -0
index 93d2599d83c..04fc0054323 100644
@@ -35,6 +35,7 @@ config IMX8_POWER_DOMAIN
 config IMX8M_POWER_DOMAIN
 	bool "Enable i.MX8M power domain driver"
 	depends on POWER_DOMAIN && ARCH_IMX8M
+	select CLK
 	help
 	  Enable support for manipulating NXP i.MX8M on-SoC power domains via
 	  requests to the ATF.
drivers/power/domain/imx8m-power-domain.c +360 -19

445 lines not on this page · raw message

Signature · 1 line
2.35.1
#6 lore raw

PATCH v4 4/10 imx: power-domain: Get rid of SMCCC dependency

Quoted 7 lines

This driver is the only SMCCC dependency in iMX8M U-Boot port. Rework the driver based on Linux GPCv2 driver to directly control the GPCv2 block instead of using SMCCC calls. This way, U-Boot can operate the i.MX8M power domains without depending on anything else. This is losely based on Linux GPCv2 driver. The GPU, VPU, MIPI power domains are not supported to save space, since they are not useful in the bootloader. The only domains kept are ones for HSIO, PCIe, USB.

Quoted 5 lines

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#7 lore raw

PATCH v4 5/10 power_domain: Add power_domain_get_by_name()

In reply to Marek Vasut

Implement power_domain_get_by_name() convenience function which parses DT property 'power-domain-names' and looks up power domain by matching name.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>

---
V2: Skipped to align the Vx scheme
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/power-domain-uclass.c | 14 ++++++++++++++
 include/power-domain.h                     | 21 +++++++++++++++++++++
 2 files changed, 35 insertions(+)
drivers/power/domain/power-domain-uclass.c +14 -0
index 0c5823ceddf..74c33d4e2e0 100644
@@ -80,6 +80,20 @@ int power_domain_get_by_index(struct udevice *dev,
 	return 0;
 }
 
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name)
+{
+	int index;
+
+	index = dev_read_stringlist_search(dev, "power-domain-names", name);
+	if (index < 0) {
+		debug("fdt_stringlist_search() failed: %d\n", index);
+		return index;
+	}
+
+	return power_domain_get_by_index(dev, power_domain, index);
+}
+
 int power_domain_get(struct udevice *dev, struct power_domain *power_domain)
 {
 	return power_domain_get_by_index(dev, power_domain, 0);
include/power-domain.h +21 -0
index 113276b5119..2ff6c77cd76 100644
@@ -107,6 +107,27 @@ int power_domain_get_by_index(struct udevice *dev,
 }
 #endif
 
+/**
+ * power_domain_get_by_name - Get the named power domain for a device.
+ *
+ * @dev:		The client device.
+ * @power_domain:	A pointer to a power domain struct to initialize.
+ * @name:		Power domain name to be powered on.
+ *
+ * Return: 0 if OK, or a negative error code.
+ */
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name);
+#else
+static inline
+int power_domain_get_by_name(struct udevice *dev,
+			     struct power_domain *power_domain, const char *name)
+{
+	return -ENOSYS;
+}
+#endif
+
 /**
  * power_domain_free - Free a previously requested power domain.
  *
Signature · 1 line
2.35.1
#8 lore raw

PATCH v4 5/10 power_domain: Add power_domain_get_by_name()

Quoted 6 lines

Implement power_domain_get_by_name() convenience function which parses DT property 'power-domain-names' and looks up power domain by matching name.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#9 lore raw

PATCH v4 6/10 imx: power-domain: Add i.MX8MP support

In reply to Marek Vasut

Add i.MX8MP power domain handling into the driver. This is based on the Linux GPCv2 driver state which is soon to be in Linux next.

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/imx8m-power-domain.c | 79 +++++++++++++++++++++++
 include/dt-bindings/power/imx8mp-power.h  | 46 +++++++++++++
 2 files changed, 125 insertions(+)
 create mode 100644 include/dt-bindings/power/imx8mp-power.h
drivers/power/domain/imx8m-power-domain.c +79 -0
index e2e41cf5fee..145f6ec0cd3 100644
@@ -20,11 +20,13 @@
 
 #include <dt-bindings/power/imx8mm-power.h>
 #include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 #define GPC_PGC_CPU_MAPPING			0x0ec
+#define IMX8MP_GPC_PGC_CPU_MAPPING		0x1cc
 
 #define IMX8M_PCIE2_A53_DOMAIN			BIT(15)
 #define IMX8M_OTG2_A53_DOMAIN			BIT(5)
@@ -38,6 +40,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_OTG1_A53_DOMAIN			BIT(4)
 #define IMX8MN_MIPI_A53_DOMAIN			BIT(2)
 
+#define IMX8MP_HSIOMIX_A53_DOMAIN		BIT(19)
+#define IMX8MP_USB2_PHY_A53_DOMAIN		BIT(5)
+#define IMX8MP_USB1_PHY_A53_DOMAIN		BIT(4)
+#define IMX8MP_PCIE_PHY_A53_DOMAIN		BIT(3)
+
+#define IMX8MP_GPC_PU_PGC_SW_PUP_REQ		0x0d8
+#define IMX8MP_GPC_PU_PGC_SW_PDN_REQ		0x0e4
+
 #define GPC_PU_PGC_SW_PUP_REQ			0x0f8
 #define GPC_PU_PGC_SW_PDN_REQ			0x104
 
@@ -53,8 +63,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_OTG1_SW_Pxx_REQ			BIT(2)
 #define IMX8MN_MIPI_SW_Pxx_REQ			BIT(0)
 
+#define IMX8MP_HSIOMIX_Pxx_REQ			BIT(17)
+#define IMX8MP_USB2_PHY_Pxx_REQ			BIT(3)
+#define IMX8MP_USB1_PHY_Pxx_REQ			BIT(2)
+#define IMX8MP_PCIE_PHY_SW_Pxx_REQ		BIT(1)
+
 #define GPC_M4_PU_PDN_FLG			0x1bc
 
+#define IMX8MP_GPC_PU_PWRHSK			0x190
 #define GPC_PU_PWRHSK				0x1fc
 
 #define IMX8MM_HSIO_HSK_PWRDNACKN		(BIT(23) | BIT(24))
@@ -63,6 +79,9 @@ DECLARE_GLOBAL_DATA_PTR;
 #define IMX8MN_HSIO_HSK_PWRDNACKN		BIT(23)
 #define IMX8MN_HSIO_HSK_PWRDNREQN		BIT(5)
 
+#define IMX8MP_HSIOMIX_PWRDNACKN		BIT(28)
+#define IMX8MP_HSIOMIX_PWRDNREQN		BIT(12)
+
 /*
  * The PGC offset values in Reference Manual
  * (Rev. 1, 01/2018 and the older ones) GPC chapter's
@@ -80,6 +99,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define IMX8MN_PGC_OTG1			18
 
+#define IMX8MP_PGC_PCIE			13
+#define IMX8MP_PGC_USB1			14
+#define IMX8MP_PGC_USB2			15
+#define IMX8MP_PGC_HSIOMIX		29
+
 #define GPC_PGC_CTRL(n)			(0x800 + (n) * 0x40)
 #define GPC_PGC_SR(n)			(GPC_PGC_CTRL(n) + 0xc)
 
@@ -244,6 +268,58 @@ static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
 };
 #endif
 
+#ifdef CONFIG_IMX8MP
+static const struct imx_pgc_domain imx8mp_pgc_domains[] = {
+	[IMX8MP_POWER_DOMAIN_PCIE_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_PCIE_PHY_SW_Pxx_REQ,
+			.map = IMX8MP_PCIE_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_PCIE),
+	},
+
+	[IMX8MP_POWER_DOMAIN_USB1_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_USB1_PHY_Pxx_REQ,
+			.map = IMX8MP_USB1_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_USB1),
+	},
+
+	[IMX8MP_POWER_DOMAIN_USB2_PHY] = {
+		.bits = {
+			.pxx = IMX8MP_USB2_PHY_Pxx_REQ,
+			.map = IMX8MP_USB2_PHY_A53_DOMAIN,
+		},
+		.pgc = BIT(IMX8MP_PGC_USB2),
+	},
+
+	[IMX8MP_POWER_DOMAIN_HSIOMIX] = {
+		.bits = {
+			.pxx = IMX8MP_HSIOMIX_Pxx_REQ,
+			.map = IMX8MP_HSIOMIX_A53_DOMAIN,
+			.hskreq = IMX8MP_HSIOMIX_PWRDNREQN,
+			.hskack = IMX8MP_HSIOMIX_PWRDNACKN,
+		},
+		.pgc = BIT(IMX8MP_PGC_HSIOMIX),
+		.keep_clocks = true,
+	},
+};
+
+static const struct imx_pgc_regs imx8mp_pgc_regs = {
+	.map = IMX8MP_GPC_PGC_CPU_MAPPING,
+	.pup = IMX8MP_GPC_PU_PGC_SW_PUP_REQ,
+	.pdn = IMX8MP_GPC_PU_PGC_SW_PDN_REQ,
+	.hsk = IMX8MP_GPC_PU_PWRHSK,
+};
+
+static const struct imx_pgc_domain_data imx8mp_pgc_domain_data = {
+	.domains = imx8mp_pgc_domains,
+	.domains_num = ARRAY_SIZE(imx8mp_pgc_domains),
+	.pgc_regs = &imx8mp_pgc_regs,
+};
+#endif
+
 static int imx8m_power_domain_on(struct power_domain *power_domain)
 {
 	struct udevice *dev = power_domain->dev;
@@ -457,6 +533,9 @@ static const struct udevice_id imx8m_power_domain_ids[] = {
 #endif
 #ifdef CONFIG_IMX8MN
 	{ .compatible = "fsl,imx8mn-gpc", .data = (long)&imx8mn_pgc_domain_data },
+#endif
+#ifdef CONFIG_IMX8MP
+	{ .compatible = "fsl,imx8mp-gpc", .data = (long)&imx8mp_pgc_domain_data },
 #endif
 	{ }
 };
include/dt-bindings/power/imx8mp-power.h new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.35.1
#10 lore raw

PATCH v4 6/10 imx: power-domain: Add i.MX8MP support

Quoted 7 lines

Add i.MX8MP power domain handling into the driver. This is based on the Linux GPCv2 driver state which is soon to be in Linux next.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#11 lore raw

PATCH v4 7/10 imx: power-domain: Add i.MX8MP HSIOMIX driver

In reply to Marek Vasut

Add trivial driver for i.MX8MP HSIOMIX handling. This is responsible for enabling the GPCv2 power domains and clock for USB 3.0 and PCIe in the correct order. Currently supported is the USB 3.0 part which can be tested, PCIe support should be easy to add.

---
V2: Drop two left over unused variables which triggered build warning
V3: Add TB from Tim
V4: Rebase on u-boot-imx/master

---
 drivers/power/domain/Kconfig          |   7 ++
 drivers/power/domain/Makefile         |   1 +
 drivers/power/domain/imx8mp-hsiomix.c | 159 ++++++++++++++++++++++++++
 3 files changed, 167 insertions(+)
 create mode 100644 drivers/power/domain/imx8mp-hsiomix.c
drivers/power/domain/Kconfig +7 -0
index 04fc0054323..7e1b8c072fa 100644
@@ -40,6 +40,13 @@ config IMX8M_POWER_DOMAIN
 	  Enable support for manipulating NXP i.MX8M on-SoC power domains via
 	  requests to the ATF.
 
+config IMX8MP_HSIOMIX_BLKCTRL
+	bool "Enable i.MX8MP HSIOMIX domain driver"
+	depends on POWER_DOMAIN && IMX8MP
+	select CLK
+	help
+	  Enable support for manipulating NXP i.MX8MP on-SoC HSIOMIX block controller.
+
 config MTK_POWER_DOMAIN
 	bool "Enable the MediaTek power domain driver"
 	depends on POWER_DOMAIN && ARCH_MEDIATEK
drivers/power/domain/Makefile +1 -0
index 7c8af67dbd6..e6244776216 100644
@@ -8,6 +8,7 @@ obj-$(CONFIG_APPLE_PMGR_POWER_DOMAIN) += apple-pmgr.o
 obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
 obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain-legacy.o imx8-power-domain.o
 obj-$(CONFIG_IMX8M_POWER_DOMAIN) += imx8m-power-domain.o
+obj-$(CONFIG_IMX8MP_HSIOMIX_BLKCTRL) += imx8mp-hsiomix.o
 obj-$(CONFIG_MTK_POWER_DOMAIN) += mtk-power-domain.o
 obj-$(CONFIG_MESON_GX_VPU_POWER_DOMAIN) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_EE_POWER_DOMAIN) += meson-ee-pwrc.o
drivers/power/domain/imx8mp-hsiomix.c new file +159 -0

159 lines not on this page · raw message

Signature · 1 line
2.35.1
#12 lore raw

PATCH v4 7/10 imx: power-domain: Add i.MX8MP HSIOMIX driver

Quoted 9 lines

Add trivial driver for i.MX8MP HSIOMIX handling. This is responsible for enabling the GPCv2 power domains and clock for USB 3.0 and PCIe in the correct order. Currently supported is the USB 3.0 part which can be tested, PCIe support should be easy to add.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#13 lore raw

PATCH v4 8/10 usb: dwc3: Rename .select_dr_mode to .glue_configure

In reply to Marek Vasut

Rename the select_dr_mode callback to glue_configure, the callback is used for more than enforcing controller mode even on the TI chips, so change the name to a more generic one. No functional change.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/usb/dwc3/dwc3-generic.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/usb/dwc3/dwc3-generic.c +5 -5
index 01bd0ca190e..7e3814207e4 100644
@@ -219,11 +219,11 @@ U_BOOT_DRIVER(dwc3_generic_host) = {
 #endif
 
 struct dwc3_glue_ops {
-	void (*select_dr_mode)(struct udevice *dev, int index,
+	void (*glue_configure)(struct udevice *dev, int index,
 			       enum usb_dr_mode mode);
 };
 
-void dwc3_ti_select_dr_mode(struct udevice *dev, int index,
+void dwc3_ti_glue_configure(struct udevice *dev, int index,
 			    enum usb_dr_mode mode)
 {
 #define USBOTGSS_UTMI_OTG_STATUS		0x0084
@@ -304,7 +304,7 @@ enum dwc3_omap_utmi_mode {
 }
 
 struct dwc3_glue_ops ti_ops = {
-	.select_dr_mode = dwc3_ti_select_dr_mode,
+	.glue_configure = dwc3_ti_glue_configure,
 };
 
 static int dwc3_glue_bind(struct udevice *parent)
@@ -435,8 +435,8 @@ static int dwc3_glue_probe(struct udevice *dev)
 
 		dr_mode = usb_get_dr_mode(dev_ofnode(child));
 		device_find_next_child(&child);
-		if (ops && ops->select_dr_mode)
-			ops->select_dr_mode(dev, index, dr_mode);
+		if (ops && ops->glue_configure)
+			ops->glue_configure(dev, index, dr_mode);
 		index++;
 	}
 
Signature · 1 line
2.35.1
#14 lore raw

PATCH v4 8/10 usb: dwc3: Rename .select_dr_mode to .glue_configure

Quoted 12 lines

Rename the select_dr_mode callback to glue_configure, the callback is used for more than enforcing controller mode even on the TI chips, so change the name to a more generic one. No functional change.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#15 lore raw

PATCH v4 9/10 usb: dwc3: Implement .glue_configure for i.MX8MP

In reply to Marek Vasut

The i.MX8MP glue needs to be configured based on a couple of DT properties, implement .glue_configure callback to parse those DT properties and configure the glue accordingly.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 drivers/usb/dwc3/dwc3-generic.c | 52 +++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
drivers/usb/dwc3/dwc3-generic.c +52 -0
index 7e3814207e4..6cf844cb483 100644
@@ -223,6 +223,57 @@ struct dwc3_glue_ops {
 			       enum usb_dr_mode mode);
 };
 
+void dwc3_imx8mp_glue_configure(struct udevice *dev, int index,
+				enum usb_dr_mode mode)
+{
+/* USB glue registers */
+#define USB_CTRL0		0x00
+#define USB_CTRL1		0x04
+
+#define USB_CTRL0_PORTPWR_EN	BIT(12) /* 1 - PPC enabled (default) */
+#define USB_CTRL0_USB3_FIXED	BIT(22) /* 1 - USB3 permanent attached */
+#define USB_CTRL0_USB2_FIXED	BIT(23) /* 1 - USB2 permanent attached */
+
+#define USB_CTRL1_OC_POLARITY	BIT(16) /* 0 - HIGH / 1 - LOW */
+#define USB_CTRL1_PWR_POLARITY	BIT(17) /* 0 - HIGH / 1 - LOW */
+	fdt_addr_t regs = dev_read_addr_index(dev, 1);
+	void *base = map_physmem(regs, 0x8, MAP_NOCACHE);
+	u32 value;
+
+	value = readl(base + USB_CTRL0);
+
+	if (dev_read_bool(dev, "fsl,permanently-attached"))
+		value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+	else
+		value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+
+	if (dev_read_bool(dev, "fsl,disable-port-power-control"))
+		value &= ~(USB_CTRL0_PORTPWR_EN);
+	else
+		value |= USB_CTRL0_PORTPWR_EN;
+
+	writel(value, base + USB_CTRL0);
+
+	value = readl(base + USB_CTRL1);
+	if (dev_read_bool(dev, "fsl,over-current-active-low"))
+		value |= USB_CTRL1_OC_POLARITY;
+	else
+		value &= ~USB_CTRL1_OC_POLARITY;
+
+	if (dev_read_bool(dev, "fsl,power-active-low"))
+		value |= USB_CTRL1_PWR_POLARITY;
+	else
+		value &= ~USB_CTRL1_PWR_POLARITY;
+
+	writel(value, base + USB_CTRL1);
+
+	unmap_physmem(base, MAP_NOCACHE);
+}
+
+struct dwc3_glue_ops imx8mp_ops = {
+	.glue_configure = dwc3_imx8mp_glue_configure,
+};
+
 void dwc3_ti_glue_configure(struct udevice *dev, int index,
 			    enum usb_dr_mode mode)
 {
@@ -464,6 +515,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
 	{ .compatible = "qcom,dwc3" },
+	{ .compatible = "fsl,imx8mp-dwc3", .data = (ulong)&imx8mp_ops },
 	{ .compatible = "fsl,imx8mq-dwc3" },
 	{ .compatible = "intel,tangier-dwc3" },
 	{ }
Signature · 1 line
2.35.1
#16 lore raw

PATCH v4 9/10 usb: dwc3: Implement .glue_configure for i.MX8MP

Quoted 12 lines

The i.MX8MP glue needs to be configured based on a couple of DT properties, implement .glue_configure callback to parse those DT properties and configure the glue accordingly.

Cc Angus Ainslie <[email protected]>
Cc Bin Meng <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Kunihiko Hayashi <[email protected]>
Cc Michal Simek <[email protected]>
Cc Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#17 lore raw

PATCH v4 10/10 arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD

In reply to Marek Vasut

Add DT bindings for a subset of GPCv2 which handles USB and PCIe PDs, HSIOMIX PD controller and missing USB PD properties. This is required to bring up the DWC3 USB controller up.

This is based on linux next and patches which are still pending review, but which are likely going to be part of Linux 5.19:
b2d67d7bdf74 ("arm64: dts: imx8mp: disable usb3_phy1")
290918c72a29 ("arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes")
https://www.spinics.net/lists/arm-kernel/msg958501.html

---
V2: Add TB by Tim
V3: Skipped to align the Vx scheme
V4: Rebase on u-boot-imx/master

---
 arch/arm/dts/imx8mp.dtsi | 72 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 70 insertions(+), 2 deletions(-)
arch/arm/dts/imx8mp.dtsi +70 -2
index f9d64253c8a..79b65750da9 100644
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -434,6 +435,44 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mp-gpc";
+				reg = <0x303a0000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+					};
+
+					pgc_usb1_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+					};
+
+					pgc_usb2_phy: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+					};
+
+					pgc_hsiomix: power-domains@17 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
@@ -842,6 +881,28 @@
 			};
 		};
 
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hsio_blk_ctrl: blk-ctrl@32f10000 {
+				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+				reg = <0x32f10000 0x24>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_PCIE_ROOT>;
+				clock-names = "usb", "pcie";
+				power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+						<&pgc_usb1_phy>, <&pgc_usb2_phy>,
+						<&pgc_hsiomix>, <&pgc_pcie_phy>;
+				power-domain-names = "bus", "usb", "usb-phy1",
+						     "usb-phy2", "pcie", "pcie-phy";
+				#power-domain-cells = <1>;
+			};
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
@@ -865,17 +926,20 @@
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
 
 		usb3_0: usb@32f10100 {
 			compatible = "fsl,imx8mp-dwc3";
-			reg = <0x32f10100 0x8>;
+			reg = <0x32f10100 0x8>,
+			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -907,16 +971,20 @@
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
 			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		usb3_1: usb@32f10108 {
 			compatible = "fsl,imx8mp-dwc3";
-			reg = <0x32f10108 0x8>;
+			reg = <0x32f10108 0x8>,
+			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
Signature · 1 line
2.35.1
#18 lore raw

PATCH v4 10/10 arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD

Quoted 8 lines

Add DT bindings for a subset of GPCv2 which handles USB and PCIe PDs, HSIOMIX PD controller and missing USB PD properties. This is required to bring up the DWC3 USB controller up.
This is based on linux next and patches which are still pending review, but which are likely going to be part of Linux 5.19:
b2d67d7bdf74 ("arm64: dts: imx8mp: disable usb3_phy1")
290918c72a29 ("arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes")
https://www.spinics.net/lists/arm-kernel/msg958501.html

Quoted 5 lines

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#19 lore raw

PATCH v4 1/10 power-domain: Return 0 if ops unimplemented and remove empty functions

In reply to Marek Vasut
Quoted 6 lines

In case the ops is not implemented, return 0 in the core right away. This is better than having multiple copies of functions which just return 0 in each power domain driver. Drop all those empty functions.

Cc Patrick Delaunay <[email protected]>
Cc Simon Glass <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================