Skip to contentSkip to conversation

imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands

PATCH New Tim Harvey 2 participants 2 messages Apr 13, 2022 – Apr 21, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore

Tim Harvey

author
#0 lore raw

PATCH 1/1 imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands

Enable the md5sum and crc32 commands.

---
 configs/imx8mm_venice_defconfig | 4 +++-
 configs/imx8mn_venice_defconfig | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)
configs/imx8mm_venice_defconfig +3 -1
index a9ff5654baa3..c5cd0147f0f1 100644
@@ -40,7 +40,9 @@ CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
configs/imx8mn_venice_defconfig +3 -1
index 7628667d50ae..e998b90e2282 100644
@@ -41,7 +41,9 @@ CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands

Quoted 2 lines

Enable the md5sum and crc32 commands.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================