Two changes for eMMC
Subsystems (4)
cover Two changes for eMMC
From: Bean Huo <[email protected]>
Hi Ullf,
Patch 1/2 here is a missing patch since the last commit, I've fixed the
warning: "Assign discards 'const' qualifier from pointer target type".
Patch 2/2 is new, please take a look.
thanks,
Bean Huo
Bean Huo (2):
mmc: sdhci-omap: Use of_device_get_match_data() helper
mmc: core: Allows to override the timeout value for ioctl() path
drivers/mmc/core/block.c | 8 ++++---- drivers/mmc/host/sdhci-omap.c | 9 ++------- 2 files changed, 6 insertions(+), 11 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/2 mmc: sdhci-omap: Use of_device_get_match_data() helper
From: Bean Huo <[email protected]>
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of open coding of_match_device().
--- drivers/mmc/host/sdhci-omap.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
drivers/mmc/host/sdhci-omap.c +2 -7
@@ -1219,16 +1219,11 @@ static int sdhci_omap_probe(struct platform_device *pdev)struct sdhci_pltfm_host *pltfm_host;struct sdhci_omap_host *omap_host;struct mmc_host *mmc; -const struct of_device_id *match; -struct sdhci_omap_data *data; +const struct sdhci_omap_data *data;const struct soc_device_attribute *soc;struct resource *regs; - match =of_match_device (omap_sdhci_match, dev); -if (!match) -return -EINVAL ; - - data = (struct sdhci_omap_data *)match->data; + data =of_device_get_match_data (&pdev->dev);if (!data) {dev_err (dev,"no sdhci omap data\n" );return -EINVAL ;
Signature · 1 line
2.34.1
Re: [PATCH v1 1/2] mmc: sdhci-omap: Use of_device_get_match_data() helper
Quoted 7 lines · Bean Huo
From: Bean Huo <[email protected]>
Only the device data is needed, not the entire struct
of_device_id. Useof_device_get_match_data()instead of open codingof_match_device().Signed-off-by Bean Huo <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 30 lines
--- drivers/mmc/host/sdhci-omap.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)drivers/mmc/host/sdhci-omap.c +2
-8@@ -1219,16 +1219,11 @@ static int sdhci_omap_probe(struct platform_device *pdev)struct sdhci_pltfm_host *pltfm_host;struct sdhci_omap_host *omap_host;struct mmc_host *mmc; -const struct of_device_id *match; -struct sdhci_omap_data *data; +const struct sdhci_omap_data *data;const struct soc_device_attribute *soc;struct resource *regs; - match =of_match_device (omap_sdhci_match, dev); -if (!match) -return -EINVAL ; - - data = (struct sdhci_omap_data *)match->data; + data =of_device_get_match_data (&pdev->dev);if (!data) {dev_err (dev,"no sdhci omap data\n" );return -EINVAL ; --2.34.1
PATCH 2/2 mmc: core: Allows to override the timeout value for ioctl() path
In reply to Bean HuoFrom: Bean Huo <[email protected]>
Occasionally, user-land applications initiate longer timeout values for certain commands through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path.
--- drivers/mmc/core/block.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/core/block.c +4 -4
@@ -609,11 +609,11 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,if (idata->rpmb || (cmd.flags &MMC_RSP_R1B ) ==MMC_RSP_R1B ) {/* -* Ensure RPMB/R1B command has completed by polling CMD13 -* "Send Status". +* Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we +* allow to override the default timeout value if a custom timeout is specified. */ - err =mmc_poll_for_busy (card,MMC_BLK_TIMEOUT_MS , false, -MMC_BUSY_IO ); + err =mmc_poll_for_busy (card, idata->ic.cmd_timeout_ms ? :MMC_BLK_TIMEOUT_MS , + false,MMC_BUSY_IO ); }return err;
Signature · 1 line
2.34.1
RE: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
Quoted 10 lines
From: Bean Huo <[email protected]>
Occasionally, user-land applications initiate longer timeout values for certain commands through
ioctl()system call. But so far we are still using a fixed timeout of 10 seconds inmmc_poll_for_busy()on theioctl()path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path.
Quoted 2 lines
Cc stable <[email protected]>Signed-off-by Bean Huo <[email protected]>
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
In reply to Bean HuoQuoted 10 lines · Bean Huo
From: Bean Huo <[email protected]>
Occasionally, user-land applications initiate longer timeout values for certain commands through
ioctl()system call. But so far we are still using a fixed timeout of 10 seconds inmmc_poll_for_busy()on theioctl()path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path.Cc stable <[email protected]>Signed-off-by Bean Huo <[email protected]>
(...)
drivers/mmc/core/block.c static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, · line 616
Quoted 11 lines
if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { /*drivers/mmc/core/block.c +4
-4-* Ensure RPMB/R1B command has completed by polling CMD13 -* "Send Status". +* Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we +* allow to override the default timeout value if a custom timeout is specified. */ - err =mmc_poll_for_busy (card,MMC_BLK_TIMEOUT_MS , false, -MMC_BUSY_IO ); + err =mmc_poll_for_busy (card, idata->ic.cmd_timeout_ms ? :MMC_BLK_TIMEOUT_MS , + false,MMC_BUSY_IO );
I suppose it's OK (albeit dubious) that we have a userspace interface setting a hardware-specific thing such as a timeout.
However: is MMC_BLK_TIMEOUT_MS even reasonable here? If you guys know a better timeout for RPMB operations (from your experience) what about defining MMC_RPMB_TIMEOUT_MS to something more reasonable (and I suppose longer) and use that as fallback instead of MMC_BLK_TIMEOUT_MS?
This knowledge (that RPMB commands can have long timeouts) is not something that should be hidden in userspace.
Yours,
Linus Walleij
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
Quoted 22 lines · Linus Walleij
Quoted 15 lines
if (
idata->rpmb|| (cmd.flags &MMC_RSP_R1B) ==MMC_RSP_R1B) {
/*
- * Ensure RPMB/R1B command has completed by polling CMD13
- * "Send Status".
+ * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
+ * allow to override the default timeout value if a custom timeout is specified.
*/
- err = mmc_poll_for_busy(card,MMC_BLK_TIMEOUT_MS, false,
-MMC_BUSY_IO);
+ err = mmc_poll_for_busy(card, idata-Quoted 2 lines
Quoted 1 line
ic.cmd_timeout_ms ? :
MMC_BLK_TIMEOUT_MS,+ false,
MMC_BUSY_IO);I suppose it's OK (albeit dubious) that we have a userspace interface setting
a hardware-specific thing such as a timeout.
Quoted 9 lines
However: is
MMC_BLK_TIMEOUT_MSeven reasonable here? If you guys know a better timeout for RPMB operations (from your experience) what about definingMMC_RPMB_TIMEOUT_MSto something more reasonable (and I suppose longer) and use that as fallback instead ofMMC_BLK_TIMEOUT_MS?This knowledge (that RPMB commands can have long timeouts) is not something that should be hidden in userspace.
Hi Linus,
understand what you mean. I must say, it's hard to come up with a uniform timeout value that works for all commands but also for all vendors. Meanwhile, the MMC_BLK_TIMEOUT_MS here is not only for RPMB commands but also for all commands (with R1B responses) issued by the ioctl() system call. The current 10s timeout can cover almost 99% of the scenarios. There are very few special cases that take more than 10s.
I think the current solution is the most flexible way, if the customer wants to override the kernel default timeout, they know how to initiate the correct timeout value in ioctl() based on their specific hardware/software system. I don't know how to convince every maintainer and reviewer if we don't want to give this permission or want to maintain a unified timeout value in the kernel driver. Given that we already have eMMC ioctl() support, and we've opened the door to allow users to specify specific cmd_timeout_ms in struct mmc_ioc_cmd{}, please consider my change.
struct mmc_ioc_cmd {
...
/*
*Override driver-computed timeouts. Note the difference in
units!
*/
unsigned int data_timeout_ns;
unsigned int cmd_timeout_ms;...}
Kind regards,
Bean
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
Quoted 9 lines · Bean Huo
I think the current solution is the most flexible way, if the customer wants to override the kernel default timeout, they know how to initiate the correct timeout value in
ioctl()based on their specific hardware/software system. I don't know how to convince every maintainer and reviewer if we don't want to give this permission or want to maintain a unified timeout value in the kernel driver. Given that we already have eMMCioctl()support, and we've opened the door to allow users to specify specificcmd_timeout_msin struct mmc_ioc_cmd{}, please consider my change.
The patch is fine, I'm just saying we should put another patch on top that defines a RPMB default timeout and set it to something high, such as a minute.
Yours,
Linus Walleij
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
Quoted 13 lines · Linus Walleij
Quoted 9 lines · Bean Huo
I think the current solution is the most flexible way, if the customer wants to override the kernel default timeout, they know how to initiate the correct timeout value in
ioctl()based on their specific hardware/software system. I don't know how to convince every maintainer and reviewer if we don't want to give this permission or want to maintain a unified timeout value in the kernel driver. Given that we already have eMMCioctl()support, and we've opened the door to allow users to specify specificcmd_timeout_msin struct mmc_ioc_cmd{}, please consider my change.
Quoted 3 lines
The patch is fine, I'm just saying we should put another patch on top that defines a RPMB default timeout and set it to something high, such as a minute.
I am also okay with $subject patch - and I agree with you Linus, that it sounds reasonable to pick something specific for RPMB. I guess the question is rather what value to pick, but I guess Bean can have some ideas for that, at least for Micron eMMCs. BTW, we do something very similar for mmc_sanitize() already.
Kind regards
Uffe
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
In reply to Bean HuoQuoted 11 lines · Bean Huo
From: Bean Huo <[email protected]>
Occasionally, user-land applications initiate longer timeout values for certain commands through
ioctl()system call. But so far we are still using a fixed timeout of 10 seconds inmmc_poll_for_busy()on theioctl()path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path.Cc stable <[email protected]>Signed-off-by Bean Huo <[email protected]>
Applied for next, thanks!
Linus, I interpreted your earlier reply as a reviewed-by tag, so I have added that. Please tell me, if you want me to drop it.
Kind regards
Uffe
Quoted 27 lines
--- drivers/mmc/core/block.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/mmc/core/block.c +4
-5@@ -609,11 +609,11 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,if (idata->rpmb || (cmd.flags &MMC_RSP_R1B ) ==MMC_RSP_R1B ) {/* -* Ensure RPMB/R1B command has completed by polling CMD13 -* "Send Status". +* Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we +* allow to override the default timeout value if a custom timeout is specified. */ - err =mmc_poll_for_busy (card,MMC_BLK_TIMEOUT_MS , false, -MMC_BUSY_IO ); + err =mmc_poll_for_busy (card, idata->ic.cmd_timeout_ms ? :MMC_BLK_TIMEOUT_MS , + false,MMC_BUSY_IO ); }return err; --2.34.1
Re: [PATCH v1 2/2] mmc: core: Allows to override the timeout value for ioctl() path
Quoted 10 lines · Ulf Hansson
Quoted 9 lines · Bean Huo
From: Bean Huo <[email protected]>
Occasionally, user-land applications initiate longer timeout values for certain commands through
ioctl()system call. But so far we are still using a fixed timeout of 10 seconds inmmc_poll_for_busy()on theioctl()path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path.
Quoted 7 lines
Quoted 2 lines
Cc stable <[email protected]>Signed-off-by Bean Huo <[email protected]>Applied for next, thanks!
Linus, I interpreted your earlier reply as a reviewed-by tag, so I have added that. Please tell me, if you want me to drop it.
That's fine, sorry for being unclear!
Yours,
Linus Walleij