fstests: btrfs: test setting compression via xattr on nodatacow files
PATCH v2 1/1 fstests: btrfs: test setting compression via xattr on nodatacow files
Compression and nodatacow are mutually exclusive. Besides ioctl, there is another way to setting compression via xattrs, and shouldn't produce invalid combinations.
Signed-off-by Chung-Chiang Cheng <[email protected]>
--- tests/btrfs/264 | 90 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/264.out | 11 ++++++ 2 files changed, 101 insertions(+) create mode 100755 tests/btrfs/264 create mode 100644 tests/btrfs/264.out
tests/btrfs/264 new file +90 -0
@@ -0,0 +1,90 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2022 Synology Inc. All Rights Reserved. +# +# FS QA Test No. 264 +# +# Compression and nodatacow are mutually exclusive. Besides ioctl, there +# is another way to setting compression via xattrs, and shouldn't produce +# invalid combinations. +# +# To prevent mix any compression-related options with nodatacow, FS_NOCOMP_FL +# is also rejected by ioctl as well as FS_COMPR_FL on nodatacow files. To +# align with it, no and none are also unacceptable in this test. +# +# The regression is fixed by a patch with the following subject: +# btrfs: do not allow compression on nodatacow files +# +. ./common/preamble +_begin_fstest auto quick compress attr + +# Import common functions. +. ./common/filter +. ./common/attr + +# real QA test starts here + +_supported_fs btrfs +_require_scratch +_require_attrs + +_scratch_mkfs >>$seqres.full 2>&1 +_scratch_mount + +set_compression() # $1: filename, $2: alg +{ + [ -f "$1" ] || return + $SETFATTR_PROG -n "btrfs.compression" -v "$2" "$1" |& _filter_scratch +} + +# FS_NOCOMP_FL bit isn't recognized by chattr/lsattr before e2fsprogs 1.46.2 +# In order to make this test available with an older version, we wrap the output +# of lsattr to distinguish FS_COMP_FL and FS_NOCOMP_FL +check_compression() # $1: filename +{ + $LSATTR_PROG -l "$1" | grep -q "Compression_Requested" + + if [ $? -eq 0 ]; then + echo "$1: Compression is set" | _filter_scratch + else + echo "$1: Compression is not set" | _filter_scratch + fi +} + +# +# DATACOW +# +test_file="$SCRATCH_MNT/foo" +touch "$test_file" +$CHATTR_PROG -C "$test_file" + +set_compression "$test_file" zlib +check_compression "$test_file" +set_compression "$test_file" no +check_compression "$test_file" +set_compression "$test_file" lzo +check_compression "$test_file" +set_compression "$test_file" none +check_compression "$test_file" +set_compression "$test_file" zstd +check_compression "$test_file" + +# +# NODATACOW +# +test_file="$SCRATCH_MNT/bar" +touch "$test_file" +$CHATTR_PROG +C "$test_file" + +# all valid compression type are not allowed on nodatacow files +set_compression "$test_file" zlib +set_compression "$test_file" lzo +set_compression "$test_file" zstd + +# no/none are also not allowed on nodatacow files +set_compression "$test_file" no +set_compression "$test_file" none + +# success, all done +status=0 +exit
tests/btrfs/264.out new file +11 -0
@@ -0,0 +1,11 @@ +QA output created by 264 +SCRATCH_MNT/foo: Compression is set +SCRATCH_MNT/foo: Compression is not set +SCRATCH_MNT/foo: Compression is set +SCRATCH_MNT/foo: Compression is not set +SCRATCH_MNT/foo: Compression is set +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument
Signature · 1 line
2.25.1
Quoted 37 lines · Chung-Chiang Cheng
Compression and nodatacow are mutually exclusive. Besides ioctl, there is another way to setting compression via xattrs, and shouldn't produce invalid combinations.
Signed-off-by Chung-Chiang Cheng <[email protected]>--- tests/btrfs/264 | 90 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/264.out | 11 ++++++ 2 files changed, 101 insertions(+) create mode 100755 tests/btrfs/264 create mode 100644 tests/btrfs/264.outtests/btrfs/264 new file +19
-0@@ -0,0 +1,90 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2022 Synology Inc. All Rights Reserved. +# +# FS QA Test No. 264 +# +# Compression and nodatacow are mutually exclusive. Besides ioctl, there +# is another way to setting compression via xattrs, and shouldn't produce +# invalid combinations. +# +# To prevent mix any compression-related options with nodatacow, FS_NOCOMP_FL +# is also rejected by ioctl as well as FS_COMPR_FL on nodatacow files. To +# align with it, no and none are also unacceptable in this test. +# +# The regression is fixed by a patch with the following subject: +# btrfs: do not allow compression on nodatacow files +# +. ./common/preamble +_begin_fstest auto quick compress attr
tests/btrfs/264 line 29
Quoted 10 lines
tests/btrfs/264 new file +10
-0+ +# Import common functions. +. ./common/filter +. ./common/attr + +# real QA test starts here + +_supported_fs btrfs +_require_scratch +_require_attrs
_require_chattr C
Is still needed, during the previous review I meant to remove only the "_require_chattr c".
Otherwise the test looks good.
Probably the _require_chattr C can be added by the maintainer when the patch is picked, so no need to send a v3 just for that.
Reviewed-by Filipe Manana <[email protected]>
Thanks for doing this.
Quoted 81 lines
tests/btrfs/264 new file +61
-0+ +_scratch_mkfs >>$seqres.full 2>&1 +_scratch_mount + +set_compression() # $1: filename, $2: alg +{ + [ -f "$1" ] || return + $SETFATTR_PROG -n "btrfs.compression" -v "$2" "$1" |& _filter_scratch +} + +# FS_NOCOMP_FL bit isn't recognized by chattr/lsattr before e2fsprogs 1.46.2 +# In order to make this test available with an older version, we wrap the output +# of lsattr to distinguish FS_COMP_FL and FS_NOCOMP_FL +check_compression() # $1: filename +{ + $LSATTR_PROG -l "$1" | grep -q "Compression_Requested" + + if [ $? -eq 0 ]; then + echo "$1: Compression is set" | _filter_scratch + else + echo "$1: Compression is not set" | _filter_scratch + fi +} + +# +# DATACOW +# +test_file="$SCRATCH_MNT/foo" +touch "$test_file" +$CHATTR_PROG -C "$test_file" + +set_compression "$test_file" zlib +check_compression "$test_file" +set_compression "$test_file" no +check_compression "$test_file" +set_compression "$test_file" lzo +check_compression "$test_file" +set_compression "$test_file" none +check_compression "$test_file" +set_compression "$test_file" zstd +check_compression "$test_file" + +# +# NODATACOW +# +test_file="$SCRATCH_MNT/bar" +touch "$test_file" +$CHATTR_PROG +C "$test_file" + +# all valid compression type are not allowed on nodatacow files +set_compression "$test_file" zlib +set_compression "$test_file" lzo +set_compression "$test_file" zstd + +# no/none are also not allowed on nodatacow files +set_compression "$test_file" no +set_compression "$test_file" none + +# success, all done +status=0 +exittests/btrfs/264.out new file +11
-0@@ -0,0 +1,11 @@ +QA output created by 264 +SCRATCH_MNT/foo: Compression is set +SCRATCH_MNT/foo: Compression is not set +SCRATCH_MNT/foo: Compression is set +SCRATCH_MNT/foo: Compression is not set +SCRATCH_MNT/foo: Compression is set +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argument +setfattr: SCRATCH_MNT/bar: Invalid argumentSignature · 1 line
2.25.1