Skip to contentSkip to conversation

5.15.36-rc1 review

PATCH In review Greg Kroah-Hartman 10 participants 138 messages Apr 26, 2022 – Apr 27, 2022

Subsystems (6)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.15.36-rc1 review

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.36-rc1

Alex Elder <[email protected]>
arm64: dts: qcom: add IPA qcom,qmp property

Khazhismel Kumykov <[email protected]>
block/compat_ioctl: fix range check in BLKGETSIZE

Tudor Ambarus <[email protected]>
spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller

Ye Bin <[email protected]>
jbd2: fix a potential race while discarding reserved buffers after an abort

Florian Westphal <[email protected]>
netfilter: nft_ct: fix use after free when attaching zone template

Theodore Ts'o <[email protected]>
ext4: force overhead calculation if the s_overhead_cluster makes no sense

Theodore Ts'o <[email protected]>
ext4: fix overhead calculation to account for the reserved gdt blocks

wangjianjian (C) <[email protected]>
ext4, doc: fix incorrect h_reserved size

Tadeusz Struk <[email protected]>
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

Ye Bin <[email protected]>
ext4: fix use-after-free in ext4_search_dir

Ye Bin <[email protected]>
ext4: fix symlink file size not match to file content

Darrick J. Wong <[email protected]>
ext4: fix fallocate to use file_modified to update permissions consistently

Florian Westphal <[email protected]>
netfilter: conntrack: avoid useless indirection during conntrack destruction

Florian Westphal <[email protected]>
netfilter: conntrack: convert to refcount_t api

Mingwei Zhang <[email protected]>
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

Sean Christopherson <[email protected]>
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

Sean Christopherson <[email protected]>
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

Like Xu <[email protected]>
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

Rob Herring <[email protected]>
arm_pmu: Validate single/group leader events

Sergey Matyukevich <[email protected]>
ARC: entry: fix syscall_trace_exit argument

Sasha Neftin <[email protected]>
e1000e: Fix possible overflow in LTR decoding

Xiaomeng Tong <[email protected]>
ASoC: soc-dapm: fix two incorrect uses of list iterator

Mario Limonciello <[email protected]>
gpio: Request interrupts after IRQ is initialized

Paolo Valerio <[email protected]>
openvswitch: fix OOB access in reserve_sfa_size()

Max Filippov <[email protected]>
xtensa: fix a7 clobbering in coprocessor context load/store

Guo Ren <[email protected]>
xtensa: patch_text: Fixup last cpu should be master

Leo Yan <[email protected]>
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event

Leo Yan <[email protected]>
perf script: Always allow field 'data_src' for auxtrace

Athira Rajeev <[email protected]>
powerpc/perf: Fix power10 event alternatives

Athira Rajeev <[email protected]>
powerpc/perf: Fix power9 event alternatives

Miaoqian Lin <[email protected]>
drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage

Alexey Kardashevskiy <[email protected]>
KVM: PPC: Fix TCE handling for VFIO

Dave Stevenson <[email protected]>
drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

Dave Stevenson <[email protected]>
drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

Zhipeng Xie <[email protected]>
perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

kuyo chang <[email protected]>
sched/pelt: Fix attach_entity_load_avg() corner case

Tom Rix <[email protected]>
scsi: sr: Do not leak information in ioctl

Miaoqian Lin <[email protected]>
Input: omap4-keypad - fix pm_runtime_get_sync() error checking

Manuel Ullmann <[email protected]>
net: atlantic: invert deep par in pm functions, preventing null derefs

Kevin Groeneveld <[email protected]>
dmaengine: imx-sdma: fix init of uart scripts

Xiaomeng Tong <[email protected]>
dma: at_xdmac: fix a missing check on list iterator

Zheyu Ma <[email protected]>
ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Alistair Popple <[email protected]>
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()

Nico Pache <[email protected]>
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup

Christophe Leroy <[email protected]>
mm, hugetlb: allow for "high" userspace addresses

Shakeel Butt <[email protected]>
memcg: sync flush only if periodic flush is delayed

Xu Yu <[email protected]>
mm/memory-failure.c: skip huge_zero_page in memory_failure()

Shubhrajyoti Datta <[email protected]>
EDAC/synopsys: Read the error count from the correct register

Christoph Hellwig <[email protected]>
nvme-pci: disable namespace identifiers for Qemu controllers

Christoph Hellwig <[email protected]>
nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202

Christoph Hellwig <[email protected]>
nvme: add a quirk to disable namespace identifiers

NeilBrown <[email protected]>
VFS: filename_create(): fix incorrect intent.

Mikulas Patocka <[email protected]>
stat: fix inconsistency between struct stat and struct compat_stat

Mike Christie <[email protected]>
scsi: qedi: Fix failed disconnect handling

Mike Christie <[email protected]>
scsi: iscsi: Fix NOP handling during conn recovery

Mike Christie <[email protected]>
scsi: iscsi: Merge suspend fields

Mike Christie <[email protected]>
scsi: iscsi: Release endpoint ID when its freed

Tomas Melin <[email protected]>
net: macb: Restart tx only if queue pointer is lagging

Xiaoke Wang <[email protected]>
drm/msm/mdp5: check the return of kzalloc()

Lv Ruyi <[email protected]>
dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

Borislav Petkov <[email protected]>
brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

Borislav Petkov <[email protected]>
mt76: Fix undefined behavior due to shift overflowing the constant

Kai-Heng Feng <[email protected]>
net: atlantic: Avoid out-of-bounds indexing

David Howells <[email protected]>
cifs: Check the IOCB_DIRECT flag, not O_DIRECT

Hongbin Wang <[email protected]>
vxlan: fix error return code in vxlan_fdb_append

Rob Herring <[email protected]>
arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes

Xiaoke Wang <[email protected]>
drm/msm/disp: check the return value of kzalloc()

Borislav Petkov <[email protected]>
ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

Jiapeng Chong <[email protected]>
platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

Sameer Pujar <[email protected]>
reset: tegra-bpmp: Restore Handle errors in BPMP response

Heiner Kallweit <[email protected]>
reset: renesas: Check return value of reset_control_deassert()

Kees Cook <[email protected]>
ARM: vexpress/spc: Avoid negative array index when !SMP

Muchun Song <[email protected]>

    arm64: mm: fix p?d_leaf()

Ido Schimmel <[email protected]>
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

Dave Jiang <[email protected]>
dmaengine: idxd: skip clearing device context when device is read-only

Dave Jiang <[email protected]>
dmaengine: idxd: add RO check for wq max_transfer_size write

Dave Jiang <[email protected]>
dmaengine: idxd: add RO check for wq max_batch_size write

Kevin Hao <[email protected]>
net: stmmac: Use readl_poll_timeout_atomic() in atomic state

José Roberto de Souza <[email protected]>
drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails

Eric Dumazet <[email protected]>
netlink: reset network and mac headers in netlink_dump()

Vladimir Oltean <[email protected]>
net: mscc: ocelot: fix broken IP multicast flooding

Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Calculate checksums in tagger

Oliver Hartkopp <[email protected]>
can: isotp: stop timeout monitoring when no first frame was sent

Eric Dumazet <[email protected]>
ipv6: make ip6_rt_gc_expire an atomic_t

David Ahern <[email protected]>
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu

Eric Dumazet <[email protected]>
net/sched: cls_u32: fix possible leak in u32_init_knode()

Stephen Hemminger <[email protected]>
net: restore alpha order to Ethernet devices in config

Peilin Ye <[email protected]>
ip6_gre: Fix skb_under_panic in __gre6_xmit()

Peilin Ye <[email protected]>

    ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()

Hangbin Liu <[email protected]>
net/packet: fix packet_sock xmit return value checking

Tony Lu <[email protected]>
net/smc: Fix sock leak when release after smc_shutdown()

David Howells <[email protected]>
rxrpc: Restore removed timer deletion

Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix warning about PCM count when used with SOF

Vinicius Costa Gomes <[email protected]>
igc: Fix suspending when PTM is active

Sasha Neftin <[email protected]>
igc: Fix BUG: scheduling while atomic

Sasha Neftin <[email protected]>
igc: Fix infinite loop in release_swfw_sync

Matthias Schiffer <[email protected]>
spi: cadence-quadspi: fix incorrect supports_op() return value

Sabrina Dubroca <[email protected]>
esp: limit skb_page_frag_refill use to a single page

Allen-KH Cheng <[email protected]>
spi: spi-mtk-nor: initialize spi controller after resume

Herve Codina <[email protected]>
dmaengine: dw-edma: Fix unaligned 64bit access

zhangqilong <[email protected]>
dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources

Miaoqian Lin <[email protected]>
dmaengine: imx-sdma: Fix error checking in sdma_event_remap

Dave Jiang <[email protected]>
dmaengine: idxd: fix device cleanup on disable

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_component

Miaoqian Lin <[email protected]>

    ASoC: rk817: Use devm_clk_get() in rk817_platform_probe

Peter Ujfalusi <[email protected]>
ASoC: topology: Correct error handling in soc_tplg_dapm_widget_create()

Mark Brown <[email protected]>
ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek

Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo NP70PNP

Takashi Iwai <[email protected]>
ALSA: usb-audio: Clear MIDI port active flag after draining

Eric Dumazet <[email protected]>
net/sched: cls_u32: fix netns refcount changes in u32_change()

Peter Wang <[email protected]>
scsi: ufs: core: scsi_get_lba() error fix

Bob Peterson <[email protected]>
gfs2: assign rgrp glock before compute_bitstructs

Marco Elver <[email protected]>
mm, kfence: support kmem_dump_obj() for KFENCE objects

Adrian Hunter <[email protected]>
perf tools: Fix segfault accessing sample_id xyarray

Xiongwei Song <[email protected]>
mm: page_alloc: fix building error on -Werror=array-compare

Kees Cook <[email protected]>
etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead

Anshuman Khandual <[email protected]>
arm64/mm: drop HAVE_ARCH_PFN_VALID

Mike Rapoport <[email protected]>
dma-mapping: remove bogus test for pfn_valid from dma_map_resource

Darrick J. Wong <[email protected]>
xfs: return errors in xfs_fs_sync_fs

Darrick J. Wong <[email protected]>

    vfs: make sync_filesystem return errors from ->sync_fs

Christoph Hellwig <[email protected]>
block: simplify the block device syncing code

Christoph Hellwig <[email protected]>
block: remove __sync_blockdev

Christoph Hellwig <[email protected]>
fs: remove __sync_filesystem

-------------

Diffstat:

 Documentation/filesystems/ext4/attributes.rst      |  2 +-
 Makefile                                           |  4 +-
 arch/arc/kernel/entry.S                            |  1 +
 arch/arm/mach-vexpress/spc.c                       |  2 +-
 arch/arm64/Kconfig                                 |  1 -
 arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi  |  8 +--
 arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi  |  8 +--
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |  2 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  2 +
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  2 +
 arch/arm64/include/asm/page.h                      |  1 -
 arch/arm64/include/asm/pgtable.h                   |  4 +-
 arch/arm64/mm/init.c                               | 37 -----------
 arch/powerpc/kvm/book3s_64_vio.c                   | 45 +++++++-------
 arch/powerpc/kvm/book3s_64_vio_hv.c                | 44 ++++++-------
 arch/powerpc/perf/power10-pmu.c                    |  2 +-
 arch/powerpc/perf/power9-pmu.c                     |  8 +--
 arch/x86/include/asm/compat.h                      |  6 +-
 arch/x86/kvm/pmu.h                                 |  9 +++
 arch/x86/kvm/svm/pmu.c                             |  1 +
 arch/x86/kvm/svm/sev.c                             |  9 ++-
 arch/x86/kvm/vmx/nested.c                          |  5 ++
 arch/x86/kvm/vmx/pmu_intel.c                       |  8 +--
 arch/x86/kvm/vmx/vmx.c                             |  5 ++
 arch/x86/kvm/vmx/vmx.h                             |  1 +
 arch/x86/kvm/x86.c                                 | 15 ++++-
 arch/xtensa/kernel/coprocessor.S                   |  4 +-
 arch/xtensa/kernel/jump_label.c                    |  2 +-
 block/bdev.c                                       | 28 ++++++---
 block/ioctl.c                                      |  2 +-
 drivers/ata/pata_marvell.c                         |  2 +
 drivers/dma/at_xdmac.c                             | 12 ++--
 drivers/dma/dw-edma/dw-edma-v0-core.c              |  7 ++-
 drivers/dma/idxd/device.c                          |  6 +-
 drivers/dma/idxd/sysfs.c                           |  6 ++
 drivers/dma/imx-sdma.c                             | 32 +++++-----
 drivers/dma/mediatek/mtk-uart-apdma.c              |  9 ++-
 drivers/edac/synopsys_edac.c                       | 16 +++--
 drivers/gpio/gpiolib.c                             |  4 +-
 drivers/gpu/drm/i915/display/intel_psr.c           | 38 +++++++-----
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c         |  3 +
 drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c  |  2 +
 .../gpu/drm/panel/panel-raspberrypi-touchscreen.c  | 13 +++-
 drivers/gpu/drm/vc4/vc4_dsi.c                      |  2 +-
 drivers/input/keyboard/omap4-keypad.c              |  2 +-
 drivers/net/ethernet/Kconfig                       | 26 ++++----
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c    |  8 +--
 .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |  8 +--
 drivers/net/ethernet/aquantia/atlantic/aq_vec.c    | 24 ++++----
 drivers/net/ethernet/cadence/macb_main.c           |  8 +++
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c |  8 ++-
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  4 +-
 drivers/net/ethernet/intel/igc/igc_i225.c          | 11 +++-
 drivers/net/ethernet/intel/igc/igc_phy.c           |  4 +-
 drivers/net/ethernet/intel/igc/igc_ptp.c           | 15 ++++-
 drivers/net/ethernet/mscc/ocelot.c                 |  2 +
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  4 +-
 drivers/net/vxlan.c                                |  4 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  2 +-
 drivers/net/wireless/mediatek/mt76/mt76x2/pci.c    |  2 +-
 drivers/nvme/host/core.c                           | 24 ++++++--
 drivers/nvme/host/nvme.h                           |  5 ++
 drivers/nvme/host/pci.c                            |  9 ++-
 drivers/perf/arm_pmu.c                             | 10 ++-
 drivers/platform/x86/samsung-laptop.c              |  2 -
 drivers/reset/reset-rzg2l-usbphy-ctrl.c            |  4 +-
 drivers/reset/tegra/reset-bpmp.c                   |  9 ++-
 drivers/scsi/bnx2i/bnx2i_hwi.c                     |  2 +-
 drivers/scsi/bnx2i/bnx2i_iscsi.c                   |  2 +-
 drivers/scsi/cxgbi/libcxgbi.c                      |  6 +-
 drivers/scsi/libiscsi.c                            | 27 ++++----
 drivers/scsi/libiscsi_tcp.c                        |  2 +-
 drivers/scsi/qedi/qedi_iscsi.c                     | 69 ++++++++++-----------
 drivers/scsi/scsi_transport_iscsi.c                | 71 +++++++++++----------
 drivers/scsi/sr_ioctl.c                            | 15 ++++-
 drivers/scsi/ufs/ufshcd.c                          |  5 +-
 drivers/spi/atmel-quadspi.c                        |  3 +
 drivers/spi/spi-cadence-quadspi.c                  | 19 +++++-
 drivers/spi/spi-mtk-nor.c                          | 12 +++-
 fs/cifs/cifsfs.c                                   |  2 +-
 fs/ext4/ext4.h                                     |  6 +-
 fs/ext4/extents.c                                  | 32 +++++++---
 fs/ext4/inode.c                                    | 18 +++++-
 fs/ext4/namei.c                                    |  4 +-
 fs/ext4/page-io.c                                  |  4 +-
 fs/ext4/super.c                                    | 19 ++++--
 fs/gfs2/rgrp.c                                     |  9 +--
 fs/hugetlbfs/inode.c                               |  9 +--
 fs/internal.h                                      | 11 ----
 fs/jbd2/commit.c                                   |  4 +-
 fs/namei.c                                         | 22 +++----
 fs/stat.c                                          | 19 +++---
 fs/sync.c                                          | 72 +++++++++-------------
 fs/xfs/xfs_super.c                                 |  6 +-
 include/linux/blkdev.h                             |  9 +++
 include/linux/etherdevice.h                        |  5 +-
 include/linux/kfence.h                             | 24 ++++++++
 include/linux/memcontrol.h                         |  5 ++
 include/linux/netfilter/nf_conntrack_common.h      | 10 +--
 include/linux/sched.h                              |  1 +
 include/linux/sched/mm.h                           |  8 +++
 include/net/esp.h                                  |  2 -
 include/net/netfilter/nf_conntrack.h               |  8 ++-
 include/net/netns/ipv6.h                           |  4 +-
 include/scsi/libiscsi.h                            |  9 +--
 include/scsi/scsi_transport_iscsi.h                |  2 +-
 kernel/dma/mapping.c                               |  4 --
 kernel/events/core.c                               |  2 +-
 kernel/events/internal.h                           |  5 ++
 kernel/events/ring_buffer.c                        |  5 --
 kernel/sched/fair.c                                | 10 +--
 mm/kfence/core.c                                   | 21 -------
 mm/kfence/kfence.h                                 | 21 +++++++
 mm/kfence/report.c                                 | 47 ++++++++++++++
 mm/memcontrol.c                                    | 12 +++-
 mm/memory-failure.c                                | 13 ++++
 mm/mmap.c                                          |  8 ---
 mm/mmu_notifier.c                                  | 14 ++++-
 mm/oom_kill.c                                      | 54 +++++++++++-----
 mm/page_alloc.c                                    |  2 +-
 mm/slab.c                                          |  2 +-
 mm/slab.h                                          |  2 +-
 mm/slab_common.c                                   |  9 +++
 mm/slob.c                                          |  2 +-
 mm/slub.c                                          |  2 +-
 mm/workingset.c                                    |  2 +-
 net/can/isotp.c                                    | 10 ++-
 net/dsa/tag_hellcreek.c                            |  8 +++
 net/ipv4/esp4.c                                    |  5 +-
 net/ipv6/esp6.c                                    |  5 +-
 net/ipv6/ip6_gre.c                                 | 14 +++--
 net/ipv6/route.c                                   | 11 ++--
 net/l3mdev/l3mdev.c                                |  2 +-
 net/netfilter/nf_conntrack_core.c                  | 38 ++++++------
 net/netfilter/nf_conntrack_expect.c                |  4 +-
 net/netfilter/nf_conntrack_netlink.c               |  6 +-
 net/netfilter/nf_conntrack_standalone.c            |  4 +-
 net/netfilter/nf_flow_table_core.c                 |  2 +-
 net/netfilter/nf_synproxy_core.c                   |  1 -
 net/netfilter/nft_ct.c                             |  9 +--
 net/netfilter/xt_CT.c                              |  3 +-
 net/netlink/af_netlink.c                           |  7 +++
 net/openvswitch/conntrack.c                        |  1 -
 net/openvswitch/flow_netlink.c                     |  2 +-
 net/packet/af_packet.c                             | 13 ++--
 net/rxrpc/net_ns.c                                 |  2 +
 net/sched/act_ct.c                                 |  1 -
 net/sched/cls_u32.c                                | 24 +++++---
 net/smc/af_smc.c                                   |  4 +-
 sound/pci/hda/patch_hdmi.c                         |  6 +-
 sound/pci/hda/patch_realtek.c                      |  1 +
 sound/soc/atmel/sam9g20_wm8731.c                   | 61 ------------------
 sound/soc/codecs/msm8916-wcd-digital.c             |  9 ++-
 sound/soc/codecs/rk817_codec.c                     |  2 +-
 sound/soc/codecs/wcd934x.c                         | 26 +-------
 sound/soc/soc-dapm.c                               |  6 +-
 sound/soc/soc-topology.c                           |  4 +-
 sound/usb/midi.c                                   |  1 +
 sound/usb/usbaudio.h                               |  2 +-
 tools/lib/perf/evlist.c                            |  3 +-
 tools/perf/builtin-report.c                        | 14 +++++
 tools/perf/builtin-script.c                        |  2 +-
 .../selftests/drivers/net/mlxsw/vxlan_flooding.sh  | 17 +++++
 163 files changed, 1037 insertions(+), 702 deletions(-)
author maintainer
#1 lore raw

PATCH 1/124 fs: remove __sync_filesystem

From: Christoph Hellwig <[email protected]>

[ Upstream commit 9a208ba5c9afa62c7b1e9c6f5e783066e84e2d3c ]

There is no clear benefit in having this helper vs just open coding it.

---
 fs/sync.c | 38 +++++++++++++++++---------------------
 1 file changed, 17 insertions(+), 21 deletions(-)
fs/sync.c +17 -21
index 1373a610dc78..0d6cdc507cb9 100644
@@ -21,25 +21,6 @@
 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
 			SYNC_FILE_RANGE_WAIT_AFTER)
 
-/*
- * Do the filesystem syncing work. For simple filesystems
- * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
- * submit IO for these buffers via __sync_blockdev(). This also speeds up the
- * wait == 1 case since in that case write_inode() functions do
- * sync_dirty_buffer() and thus effectively write one block at a time.
- */
-static int __sync_filesystem(struct super_block *sb, int wait)
-{
-	if (wait)
-		sync_inodes_sb(sb);
-	else
-		writeback_inodes_sb(sb, WB_REASON_SYNC);
-
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, wait);
-	return __sync_blockdev(sb->s_bdev, wait);
-}
-
 /*
  * Write out and wait upon all dirty data associated with this
  * superblock.  Filesystem data as well as the underlying block
@@ -61,10 +42,25 @@ int sync_filesystem(struct super_block *sb)
 	if (sb_rdonly(sb))
 		return 0;
 
-	ret = __sync_filesystem(sb, 0);
+	/*
+	 * Do the filesystem syncing work.  For simple filesystems
+	 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have
+	 * to submit I/O for these buffers via __sync_blockdev().  This also
+	 * speeds up the wait == 1 case since in that case write_inode()
+	 * methods call sync_dirty_buffer() and thus effectively write one block
+	 * at a time.
+	 */
+	writeback_inodes_sb(sb, WB_REASON_SYNC);
+	if (sb->s_op->sync_fs)
+		sb->s_op->sync_fs(sb, 0);
+	ret = __sync_blockdev(sb->s_bdev, 0);
 	if (ret < 0)
 		return ret;
-	return __sync_filesystem(sb, 1);
+
+	sync_inodes_sb(sb);
+	if (sb->s_op->sync_fs)
+		sb->s_op->sync_fs(sb, 1);
+	return __sync_blockdev(sb->s_bdev, 1);
 }
 EXPORT_SYMBOL(sync_filesystem);
 
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 2/124 block: remove __sync_blockdev

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 70164eb6ccb76ab679b016b4b60123bf4ec6c162 ]

Instead offer a new sync_blockdev_nowait helper for the !wait case. This new helper is exported as it will grow modular callers in a bit.

---
 block/bdev.c           | 11 ++++++-----
 fs/internal.h          |  5 -----
 fs/sync.c              |  7 ++++---
 include/linux/blkdev.h |  5 +++++
 4 files changed, 15 insertions(+), 13 deletions(-)
block/bdev.c +6 -5
index 485a258b0ab3..33cac289302e 100644
@@ -184,14 +184,13 @@ int sb_min_blocksize(struct super_block *sb, int size)
 
 EXPORT_SYMBOL(sb_min_blocksize);
 
-int __sync_blockdev(struct block_device *bdev, int wait)
+int sync_blockdev_nowait(struct block_device *bdev)
 {
 	if (!bdev)
 		return 0;
-	if (!wait)
-		return filemap_flush(bdev->bd_inode->i_mapping);
-	return filemap_write_and_wait(bdev->bd_inode->i_mapping);
+	return filemap_flush(bdev->bd_inode->i_mapping);
 }
+EXPORT_SYMBOL_GPL(sync_blockdev_nowait);
 
 /*
  * Write out and wait upon all the dirty data associated with a block
@@ -199,7 +198,9 @@ int __sync_blockdev(struct block_device *bdev, int wait)
  */
 int sync_blockdev(struct block_device *bdev)
 {
-	return __sync_blockdev(bdev, 1);
+	if (!bdev)
+		return 0;
+	return filemap_write_and_wait(bdev->bd_inode->i_mapping);
 }
 EXPORT_SYMBOL(sync_blockdev);
 
fs/internal.h +0 -5
index 3cd065c8a66b..b5caa16f4645 100644
@@ -23,7 +23,6 @@ struct pipe_inode_info;
 #ifdef CONFIG_BLOCK
 extern void __init bdev_cache_init(void);
 
-extern int __sync_blockdev(struct block_device *bdev, int wait);
 void iterate_bdevs(void (*)(struct block_device *, void *), void *);
 void emergency_thaw_bdev(struct super_block *sb);
 #else
@@ -31,10 +30,6 @@ static inline void bdev_cache_init(void)
 {
 }
 
-static inline int __sync_blockdev(struct block_device *bdev, int wait)
-{
-	return 0;
-}
 static inline void iterate_bdevs(void (*f)(struct block_device *, void *),
 		void *arg)
 {
fs/sync.c +4 -3
index 0d6cdc507cb9..a621089eb07e 100644
@@ -3,6 +3,7 @@
  * High-level sync()-related operations
  */
 
+#include <linux/blkdev.h>
 #include <linux/kernel.h>
 #include <linux/file.h>
 #include <linux/fs.h>
@@ -45,7 +46,7 @@ int sync_filesystem(struct super_block *sb)
 	/*
 	 * Do the filesystem syncing work.  For simple filesystems
 	 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have
-	 * to submit I/O for these buffers via __sync_blockdev().  This also
+	 * to submit I/O for these buffers via sync_blockdev().  This also
 	 * speeds up the wait == 1 case since in that case write_inode()
 	 * methods call sync_dirty_buffer() and thus effectively write one block
 	 * at a time.
@@ -53,14 +54,14 @@ int sync_filesystem(struct super_block *sb)
 	writeback_inodes_sb(sb, WB_REASON_SYNC);
 	if (sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, 0);
-	ret = __sync_blockdev(sb->s_bdev, 0);
+	ret = sync_blockdev_nowait(sb->s_bdev);
 	if (ret < 0)
 		return ret;
 
 	sync_inodes_sb(sb);
 	if (sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, 1);
-	return __sync_blockdev(sb->s_bdev, 1);
+	return sync_blockdev(sb->s_bdev);
 }
 EXPORT_SYMBOL(sync_filesystem);
 
include/linux/blkdev.h +5 -0
index 413c0148c0ce..6bbd393e6bcc 100644
@@ -1999,6 +1999,7 @@ int truncate_bdev_range(struct block_device *bdev, fmode_t mode, loff_t lstart,
 #ifdef CONFIG_BLOCK
 void invalidate_bdev(struct block_device *bdev);
 int sync_blockdev(struct block_device *bdev);
+int sync_blockdev_nowait(struct block_device *bdev);
 #else
 static inline void invalidate_bdev(struct block_device *bdev)
 {
@@ -2007,6 +2008,10 @@ static inline int sync_blockdev(struct block_device *bdev)
 {
 	return 0;
 }
+static inline int sync_blockdev_nowait(struct block_device *bdev)
+{
+	return 0;
+}
 #endif
 int fsync_bdev(struct block_device *bdev);
 
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 3/124 block: simplify the block device syncing code

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 1e03a36bdff4709c1bbf0f57f60ae3f776d51adf ]

Get rid of the indirections and just provide a sync_bdevs helper for the generic sync code.

---
 block/bdev.c           | 17 ++++++++++++++---
 fs/internal.h          |  6 ------
 fs/sync.c              | 23 ++++-------------------
 include/linux/blkdev.h |  4 ++++
 4 files changed, 22 insertions(+), 28 deletions(-)
block/bdev.c +14 -3
index 33cac289302e..18abafb135e0 100644
@@ -1017,7 +1017,7 @@ int __invalidate_device(struct block_device *bdev, bool kill_dirty)
 }
 EXPORT_SYMBOL(__invalidate_device);
 
-void iterate_bdevs(void (*func)(struct block_device *, void *), void *arg)
+void sync_bdevs(bool wait)
 {
 	struct inode *inode, *old_inode = NULL;
 
@@ -1048,8 +1048,19 @@ void iterate_bdevs(void (*func)(struct block_device *, void *), void *arg)
 		bdev = I_BDEV(inode);
 
 		mutex_lock(&bdev->bd_disk->open_mutex);
-		if (bdev->bd_openers)
-			func(bdev, arg);
+		if (!bdev->bd_openers) {
+			; /* skip */
+		} else if (wait) {
+			/*
+			 * We keep the error status of individual mapping so
+			 * that applications can catch the writeback error using
+			 * fsync(2). See filemap_fdatawait_keep_errors() for
+			 * details.
+			 */
+			filemap_fdatawait_keep_errors(inode->i_mapping);
+		} else {
+			filemap_fdatawrite(inode->i_mapping);
+		}
 		mutex_unlock(&bdev->bd_disk->open_mutex);
 
 		spin_lock(&blockdev_superblock->s_inode_list_lock);
fs/internal.h +0 -6
index b5caa16f4645..cdd83d4899bb 100644
@@ -23,17 +23,11 @@ struct pipe_inode_info;
 #ifdef CONFIG_BLOCK
 extern void __init bdev_cache_init(void);
 
-void iterate_bdevs(void (*)(struct block_device *, void *), void *);
 void emergency_thaw_bdev(struct super_block *sb);
 #else
 static inline void bdev_cache_init(void)
 {
 }
-
-static inline void iterate_bdevs(void (*f)(struct block_device *, void *),
-		void *arg)
-{
-}
 static inline int emergency_thaw_bdev(struct super_block *sb)
 {
 	return 0;
fs/sync.c +4 -19
index a621089eb07e..3ce8e2137f31 100644
@@ -78,21 +78,6 @@ static void sync_fs_one_sb(struct super_block *sb, void *arg)
 		sb->s_op->sync_fs(sb, *(int *)arg);
 }
 
-static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
-{
-	filemap_fdatawrite(bdev->bd_inode->i_mapping);
-}
-
-static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
-{
-	/*
-	 * We keep the error status of individual mapping so that
-	 * applications can catch the writeback error using fsync(2).
-	 * See filemap_fdatawait_keep_errors() for details.
-	 */
-	filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping);
-}
-
 /*
  * Sync everything. We start by waking flusher threads so that most of
  * writeback runs on all devices in parallel. Then we sync all inodes reliably
@@ -111,8 +96,8 @@ void ksys_sync(void)
 	iterate_supers(sync_inodes_one_sb, NULL);
 	iterate_supers(sync_fs_one_sb, &nowait);
 	iterate_supers(sync_fs_one_sb, &wait);
-	iterate_bdevs(fdatawrite_one_bdev, NULL);
-	iterate_bdevs(fdatawait_one_bdev, NULL);
+	sync_bdevs(false);
+	sync_bdevs(true);
 	if (unlikely(laptop_mode))
 		laptop_sync_completion();
 }
@@ -133,10 +118,10 @@ static void do_sync_work(struct work_struct *work)
 	 */
 	iterate_supers(sync_inodes_one_sb, &nowait);
 	iterate_supers(sync_fs_one_sb, &nowait);
-	iterate_bdevs(fdatawrite_one_bdev, NULL);
+	sync_bdevs(false);
 	iterate_supers(sync_inodes_one_sb, &nowait);
 	iterate_supers(sync_fs_one_sb, &nowait);
-	iterate_bdevs(fdatawrite_one_bdev, NULL);
+	sync_bdevs(false);
 	printk("Emergency Sync complete\n");
 	kfree(work);
 }
include/linux/blkdev.h +4 -0
index 6bbd393e6bcc..aebe67ed7a73 100644
@@ -2000,6 +2000,7 @@ int truncate_bdev_range(struct block_device *bdev, fmode_t mode, loff_t lstart,
 void invalidate_bdev(struct block_device *bdev);
 int sync_blockdev(struct block_device *bdev);
 int sync_blockdev_nowait(struct block_device *bdev);
+void sync_bdevs(bool wait);
 #else
 static inline void invalidate_bdev(struct block_device *bdev)
 {
@@ -2012,6 +2013,9 @@ static inline int sync_blockdev_nowait(struct block_device *bdev)
 {
 	return 0;
 }
+static inline void sync_bdevs(bool wait)
+{
+}
 #endif
 int fsync_bdev(struct block_device *bdev);
 
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 4/124 vfs: make sync_filesystem return errors from ->sync_fs

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 5679897eb104cec9e99609c3f045a0c20603da4c ]

Strangely, sync_filesystem ignores the return code from the ->sync_fs call, which means that syscalls like syncfs(2) never see the error. This doesn't seem right, so fix that.

---
 fs/sync.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
fs/sync.c +12 -6
index 3ce8e2137f31..c7690016453e 100644
@@ -29,7 +29,7 @@
  */
 int sync_filesystem(struct super_block *sb)
 {
-	int ret;
+	int ret = 0;
 
 	/*
 	 * We need to be protected against the filesystem going from
@@ -52,15 +52,21 @@ int sync_filesystem(struct super_block *sb)
 	 * at a time.
 	 */
 	writeback_inodes_sb(sb, WB_REASON_SYNC);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 0);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 0);
+		if (ret)
+			return ret;
+	}
 	ret = sync_blockdev_nowait(sb->s_bdev);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	sync_inodes_sb(sb);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 1);
+		if (ret)
+			return ret;
+	}
 	return sync_blockdev(sb->s_bdev);
 }
 EXPORT_SYMBOL(sync_filesystem);
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 5/124 xfs: return errors in xfs_fs_sync_fs

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 2d86293c70750e4331e9616aded33ab6b47c299d ]

Now that the VFS will do something with the return values from ->sync_fs, make ours pass on error codes.

---
 fs/xfs/xfs_super.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/xfs/xfs_super.c +5 -1
@@ -729,6 +729,7 @@ xfs_fs_sync_fs(
 	int			wait)
 {
 	struct xfs_mount	*mp = XFS_M(sb);
+	int			error;
 
 	trace_xfs_fs_sync_fs(mp, __return_address);
 
@@ -738,7 +739,10 @@ xfs_fs_sync_fs(
 	if (!wait)
 		return 0;
 
-	xfs_log_force(mp, XFS_LOG_SYNC);
+	error = xfs_log_force(mp, XFS_LOG_SYNC);
+	if (error)
+		return error;
+
 	if (laptop_mode) {
 		/*
 		 * The disk must be active because we're syncing.
author maintainer
#6 lore raw

PATCH 6/124 dma-mapping: remove bogus test for pfn_valid from dma_map_resource

In reply to Greg Kroah-Hartman

From: Mike Rapoport <[email protected]>

commit a9c38c5d267cb94871dfa2de5539c92025c855d7 upstream.

dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM.

As dma_map_resource() is the only method in DMA mapping APIs that has this check, simply drop the pfn_valid() test from dma_map_resource().

---
 kernel/dma/mapping.c |    4 ----
 1 file changed, 4 deletions(-)
kernel/dma/mapping.c +0 -4
@@ -296,10 +296,6 @@ dma_addr_t dma_map_resource(struct devic
 	if (WARN_ON_ONCE(!dev->dma_mask))
 		return DMA_MAPPING_ERROR;
 
-	/* Don't allow RAM to be mapped */
-	if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
-		return DMA_MAPPING_ERROR;
-
 	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_resource(dev, phys_addr, size, dir, attrs);
 	else if (ops->map_resource)
author maintainer
#7 lore raw

PATCH 7/124 arm64/mm: drop HAVE_ARCH_PFN_VALID

In reply to Greg Kroah-Hartman

From: Anshuman Khandual <[email protected]>

commit 3de360c3fdb34fbdbaf6da3af94367d3fded95d3 upstream.

CONFIG_SPARSEMEM_VMEMMAP is now the only available memory model on arm64 platforms and free_unused_memmap() would just return without creating any holes in the memmap mapping. There is no need for any special handling in pfn_valid() and HAVE_ARCH_PFN_VALID can just be dropped. This also moves the pfn upper bits sanity check into generic pfn_valid().

[rppt: rebased on v5.15-rc3]

---
 arch/arm64/Kconfig            |    1 -
 arch/arm64/include/asm/page.h |    1 -
 arch/arm64/mm/init.c          |   37 -------------------------------------
 3 files changed, 39 deletions(-)
arch/arm64/Kconfig +0 -1
@@ -154,7 +154,6 @@ config ARM64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
-	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
arch/arm64/include/asm/page.h +0 -1
@@ -41,7 +41,6 @@ void tag_clear_highpage(struct page *to)
 
 typedef struct page *pgtable_t;
 
-int pfn_valid(unsigned long pfn);
 int pfn_is_map_memory(unsigned long pfn);
 
 #include <asm/memory.h>
arch/arm64/mm/init.c +0 -37
@@ -184,43 +184,6 @@ static void __init zone_sizes_init(unsig
 	free_area_init(max_zone_pfns);
 }
 
-int pfn_valid(unsigned long pfn)
-{
-	phys_addr_t addr = PFN_PHYS(pfn);
-	struct mem_section *ms;
-
-	/*
-	 * Ensure the upper PAGE_SHIFT bits are clear in the
-	 * pfn. Else it might lead to false positives when
-	 * some of the upper bits are set, but the lower bits
-	 * match a valid pfn.
-	 */
-	if (PHYS_PFN(addr) != pfn)
-		return 0;
-
-	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
-		return 0;
-
-	ms = __pfn_to_section(pfn);
-	if (!valid_section(ms))
-		return 0;
-
-	/*
-	 * ZONE_DEVICE memory does not have the memblock entries.
-	 * memblock_is_map_memory() check for ZONE_DEVICE based
-	 * addresses will always fail. Even the normal hotplugged
-	 * memory will never have MEMBLOCK_NOMAP flag set in their
-	 * memblock entries. Skip memblock search for all non early
-	 * memory sections covering all of hotplug memory including
-	 * both normal and ZONE_DEVICE based.
-	 */
-	if (!early_section(ms))
-		return pfn_section_valid(ms, pfn);
-
-	return memblock_is_memory(addr);
-}
-EXPORT_SYMBOL(pfn_valid);
-
 int pfn_is_map_memory(unsigned long pfn)
 {
 	phys_addr_t addr = PFN_PHYS(pfn);
author maintainer
#8 lore raw

PATCH 8/124 etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

commit 2618a0dae09ef37728dab89ff60418cbe25ae6bd upstream.

With GCC 12, -Wstringop-overread was warning about an implicit cast from char[6] to char[8]. However, the extra 2 bytes are always thrown away, alignment doesn't matter, and the risk of hitting the edge of unallocated memory has been accepted, so this prototype can just be converted to a regular char *. Silences:

net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]

 4618 |         orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],

      |                    ^~~~~~~~~~~~~~~~~~~~~~~
---
 include/linux/etherdevice.h |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
include/linux/etherdevice.h +2 -3
@@ -127,7 +127,7 @@ static inline bool is_multicast_ether_ad
 #endif
 }
 
-static inline bool is_multicast_ether_addr_64bits(const u8 addr[6+2])
+static inline bool is_multicast_ether_addr_64bits(const u8 *addr)
 {
 #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
 #ifdef __BIG_ENDIAN
@@ -364,8 +364,7 @@ static inline bool ether_addr_equal(cons
  * Please note that alignment of addr1 & addr2 are only guaranteed to be 16 bits.
  */
 
-static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
-					   const u8 addr2[6+2])
+static inline bool ether_addr_equal_64bits(const u8 *addr1, const u8 *addr2)
 {
 #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
 	u64 fold = (*(const u64 *)addr1) ^ (*(const u64 *)addr2);
author maintainer
#9 lore raw

PATCH 9/124 mm: page_alloc: fix building error on -Werror=array-compare

In reply to Greg Kroah-Hartman

From: Xiongwei Song <[email protected]>

commit ca831f29f8f25c97182e726429b38c0802200c8f upstream.

Arthur Marsh reported we would hit the error below when building kernel with gcc-12:

CC mm/page_alloc.o
mm/page_alloc.c: In function `mem_init_print_info':
mm/page_alloc.c:8173:27: error: comparison between two arrays [-Werror=array-compare]

   8173 |                 if (start <= pos && pos < end && size > adj) \
        |

In C++20, the comparision between arrays should be warned.

---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/page_alloc.c +1 -1
@@ -8169,7 +8169,7 @@ void __init mem_init_print_info(void)
 	 */
 #define adj_init_size(start, end, size, pos, adj) \
 	do { \
-		if (start <= pos && pos < end && size > adj) \
+		if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
 			size -= adj; \
 	} while (0)
 
author maintainer
#10 lore raw

PATCH 10/124 perf tools: Fix segfault accessing sample_id xyarray

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

commit a668cc07f990d2ed19424d5c1a529521a9d1cee1 upstream.

perf_evsel::sample_id is an xyarray which can cause a segfault when accessed beyond its size. e.g.

  # perf record -e intel_pt// -C 1 sleep 1
  Segmentation fault (core dumped)
  #

That is happening because a dummy event is opened to capture text poke events accross all CPUs, however the mmap logic is allocating according to the number of user_requested_cpus.

In general, perf sometimes uses the evsel cpus to open events, and sometimes the evlist user_requested_cpus. However, it is not necessary to determine which case is which because the opened event file descriptors are also in an xyarray, the size of whch can be used to correctly allocate the size of the sample_id xyarray, because there is one ID per file descriptor.

Note, in the affected code path, perf_evsel fd array is subsequently used to get the file descriptor for the mmap, so it makes sense for the xyarrays to be the same size there.

Fixes d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf")
Fixes 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE")
Cc Adrian Hunter <[email protected]>
Cc Jiri Olsa <[email protected]>
---
 tools/lib/perf/evlist.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/lib/perf/evlist.c +1 -2
@@ -577,7 +577,6 @@ int perf_evlist__mmap_ops(struct perf_ev
 {
 	struct perf_evsel *evsel;
 	const struct perf_cpu_map *cpus = evlist->cpus;
-	const struct perf_thread_map *threads = evlist->threads;
 
 	if (!ops || !ops->get || !ops->mmap)
 		return -EINVAL;
@@ -589,7 +588,7 @@ int perf_evlist__mmap_ops(struct perf_ev
 	perf_evlist__for_each_entry(evlist, evsel) {
 		if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
 		    evsel->sample_id == NULL &&
-		    perf_evsel__alloc_id(evsel, perf_cpu_map__nr(cpus), threads->nr) < 0)
+		    perf_evsel__alloc_id(evsel, evsel->fd->max_x, evsel->fd->max_y) < 0)
 			return -ENOMEM;
 	}
 
author maintainer
#11 lore raw

PATCH 11/124 mm, kfence: support kmem_dump_obj() for KFENCE objects

In reply to Greg Kroah-Hartman

From: Marco Elver <[email protected]>

commit 2dfe63e61cc31ee59ce951672b0850b5229cd5b0 upstream.

Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been producing garbage data due to the object not actually being maintained by SLAB or SLUB.

Fix this by implementing __kfence_obj_info() that copies relevant information to struct kmem_obj_info when the object was allocated by KFENCE; this is called by a common kmem_obj_info(), which also calls the slab/slub/slob specific variant now called __kmem_obj_info().

For completeness, kmem_dump_obj() now displays if the object was allocated by KFENCE.

---
 include/linux/kfence.h |   24 ++++++++++++++++++++++++
 mm/kfence/core.c       |   21 ---------------------
 mm/kfence/kfence.h     |   21 +++++++++++++++++++++
 mm/kfence/report.c     |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.c              |    2 +-
 mm/slab.h              |    2 +-
 mm/slab_common.c       |    9 +++++++++
 mm/slob.c              |    2 +-
 mm/slub.c              |    2 +-
 9 files changed, 105 insertions(+), 25 deletions(-)
include/linux/kfence.h +24 -0
@@ -202,6 +202,22 @@ static __always_inline __must_check bool
  */
 bool __must_check kfence_handle_page_fault(unsigned long addr, bool is_write, struct pt_regs *regs);
 
+#ifdef CONFIG_PRINTK
+struct kmem_obj_info;
+/**
+ * __kfence_obj_info() - fill kmem_obj_info struct
+ * @kpp: kmem_obj_info to be filled
+ * @object: the object
+ *
+ * Return:
+ * * false - not a KFENCE object
+ * * true - a KFENCE object, filled @kpp
+ *
+ * Copies information to @kpp for KFENCE objects.
+ */
+bool __kfence_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page);
+#endif
+
 #else /* CONFIG_KFENCE */
 
 static inline bool is_kfence_address(const void *addr) { return false; }
@@ -219,6 +235,14 @@ static inline bool __must_check kfence_h
 	return false;
 }
 
+#ifdef CONFIG_PRINTK
+struct kmem_obj_info;
+static inline bool __kfence_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
+{
+	return false;
+}
+#endif
+
 #endif
 
 #endif /* _LINUX_KFENCE_H */
mm/kfence/core.c +0 -21
@@ -221,27 +221,6 @@ static bool kfence_unprotect(unsigned lo
 	return !KFENCE_WARN_ON(!kfence_protect_page(ALIGN_DOWN(addr, PAGE_SIZE), false));
 }
 
-static inline struct kfence_metadata *addr_to_metadata(unsigned long addr)
-{
-	long index;
-
-	/* The checks do not affect performance; only called from slow-paths. */
-
-	if (!is_kfence_address((void *)addr))
-		return NULL;
-
-	/*
-	 * May be an invalid index if called with an address at the edge of
-	 * __kfence_pool, in which case we would report an "invalid access"
-	 * error.
-	 */
-	index = (addr - (unsigned long)__kfence_pool) / (PAGE_SIZE * 2) - 1;
-	if (index < 0 || index >= CONFIG_KFENCE_NUM_OBJECTS)
-		return NULL;
-
-	return &kfence_metadata[index];
-}
-
 static inline unsigned long metadata_to_pageaddr(const struct kfence_metadata *meta)
 {
 	unsigned long offset = (meta - kfence_metadata + 1) * PAGE_SIZE * 2;
mm/kfence/kfence.h +21 -0
@@ -93,6 +93,27 @@ struct kfence_metadata {
 
 extern struct kfence_metadata kfence_metadata[CONFIG_KFENCE_NUM_OBJECTS];
 
+static inline struct kfence_metadata *addr_to_metadata(unsigned long addr)
+{
+	long index;
+
+	/* The checks do not affect performance; only called from slow-paths. */
+
+	if (!is_kfence_address((void *)addr))
+		return NULL;
+
+	/*
+	 * May be an invalid index if called with an address at the edge of
+	 * __kfence_pool, in which case we would report an "invalid access"
+	 * error.
+	 */
+	index = (addr - (unsigned long)__kfence_pool) / (PAGE_SIZE * 2) - 1;
+	if (index < 0 || index >= CONFIG_KFENCE_NUM_OBJECTS)
+		return NULL;
+
+	return &kfence_metadata[index];
+}
+
 /* KFENCE error types for report generation. */
 enum kfence_error_type {
 	KFENCE_ERROR_OOB,		/* Detected a out-of-bounds access. */
mm/kfence/report.c +47 -0

50 lines not on this page · raw message

mm/slab.c +1 -1
@@ -3658,7 +3658,7 @@ EXPORT_SYMBOL(__kmalloc_node_track_calle
 #endif /* CONFIG_NUMA */
 
 #ifdef CONFIG_PRINTK
-void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
+void __kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
 {
 	struct kmem_cache *cachep;
 	unsigned int objnr;
mm/slab.h +1 -1
@@ -643,7 +643,7 @@ struct kmem_obj_info {
 	void *kp_stack[KS_ADDRS_COUNT];
 	void *kp_free_stack[KS_ADDRS_COUNT];
 };
-void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page);
+void __kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page);
 #endif
 
 #endif /* MM_SLAB_H */
mm/slab_common.c +9 -0
@@ -568,6 +568,13 @@ bool kmem_valid_obj(void *object)
 }
 EXPORT_SYMBOL_GPL(kmem_valid_obj);
 
+static void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
+{
+	if (__kfence_obj_info(kpp, object, page))
+		return;
+	__kmem_obj_info(kpp, object, page);
+}
+
 /**
  * kmem_dump_obj - Print available slab provenance information
  * @object: slab object for which to find provenance information.
@@ -603,6 +610,8 @@ void kmem_dump_obj(void *object)
 		pr_cont(" slab%s %s", cp, kp.kp_slab_cache->name);
 	else
 		pr_cont(" slab%s", cp);
+	if (is_kfence_address(object))
+		pr_cont(" (kfence)");
 	if (kp.kp_objp)
 		pr_cont(" start %px", kp.kp_objp);
 	if (kp.kp_data_offset)
mm/slob.c +1 -1
@@ -462,7 +462,7 @@ out:
 }
 
 #ifdef CONFIG_PRINTK
-void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
+void __kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
 {
 	kpp->kp_ptr = object;
 	kpp->kp_page = page;
mm/slub.c +1 -1
@@ -4299,7 +4299,7 @@ int __kmem_cache_shutdown(struct kmem_ca
 }
 
 #ifdef CONFIG_PRINTK
-void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
+void __kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page)
 {
 	void *base;
 	int __maybe_unused i;
author maintainer
#12 lore raw

PATCH 12/124 gfs2: assign rgrp glock before compute_bitstructs

In reply to Greg Kroah-Hartman

From: Bob Peterson <[email protected]>

commit 428f651cb80b227af47fc302e4931791f2fb4741 upstream.

Before this patch, function read_rindex_entry called compute_bitstructs before it allocated a glock for the rgrp. But if compute_bitstructs found a problem with the rgrp, it called gfs2_consist_rgrpd, and that called gfs2_dump_glock for rgd->rd_gl which had not yet been assigned.

read_rindex_entry
compute_bitstructs

      gfs2_consist_rgrpd
         gfs2_dump_glock <---------rgd->rd_gl was not set.

This patch changes read_rindex_entry so it assigns an rgrp glock before calling compute_bitstructs so gfs2_dump_glock does not reference an unassigned pointer. If an error is discovered, the glock must also be put, so a new goto and label were added.

---
 fs/gfs2/rgrp.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
fs/gfs2/rgrp.c +5 -4
@@ -923,15 +923,15 @@ static int read_rindex_entry(struct gfs2
 	spin_lock_init(&rgd->rd_rsspin);
 	mutex_init(&rgd->rd_mutex);
 
-	error = compute_bitstructs(rgd);
-	if (error)
-		goto fail;
-
 	error = gfs2_glock_get(sdp, rgd->rd_addr,
 			       &gfs2_rgrp_glops, CREATE, &rgd->rd_gl);
 	if (error)
 		goto fail;
 
+	error = compute_bitstructs(rgd);
+	if (error)
+		goto fail_glock;
+
 	rgd->rd_rgl = (struct gfs2_rgrp_lvb *)rgd->rd_gl->gl_lksb.sb_lvbptr;
 	rgd->rd_flags &= ~(GFS2_RDF_UPTODATE | GFS2_RDF_PREFERRED);
 	if (rgd->rd_data > sdp->sd_max_rg_data)
@@ -945,6 +945,7 @@ static int read_rindex_entry(struct gfs2
 	}
 
 	error = 0; /* someone else read in the rgrp; free it and ignore it */
+fail_glock:
 	gfs2_glock_put(rgd->rd_gl);
 
 fail:
author maintainer
#13 lore raw

PATCH 13/124 scsi: ufs: core: scsi_get_lba() error fix

In reply to Greg Kroah-Hartman

From: Peter Wang <[email protected]>

commit 2bd3b6b75946db2ace06e145d53988e10ed7e99a upstream.

When ufs initializes without scmd->device->sector_size set, scsi_get_lba() will get a wrong shift number and trigger an ubsan error. The shift exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka 'unsigned long long').

Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP.

---
 drivers/scsi/ufs/ufshcd.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/ufs/ufshcd.c +3 -2
@@ -358,7 +358,7 @@ static void ufshcd_add_uic_command_trace
 static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag,
 				     enum ufs_trace_str_t str_t)
 {
-	u64 lba;
+	u64 lba = 0;
 	u8 opcode = 0, group_id = 0;
 	u32 intr, doorbell;
 	struct ufshcd_lrb *lrbp = &hba->lrb[tag];
@@ -375,7 +375,6 @@ static void ufshcd_add_command_trace(str
 		return;
 
 	opcode = cmd->cmnd[0];
-	lba = scsi_get_lba(cmd);
 
 	if (opcode == READ_10 || opcode == WRITE_10) {
 		/*
@@ -383,6 +382,7 @@ static void ufshcd_add_command_trace(str
 		 */
 		transfer_len =
 		       be32_to_cpu(lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
+		lba = scsi_get_lba(cmd);
 		if (opcode == WRITE_10)
 			group_id = lrbp->cmd->cmnd[6];
 	} else if (opcode == UNMAP) {
@@ -390,6 +390,7 @@ static void ufshcd_add_command_trace(str
 		 * The number of Bytes to be unmapped beginning with the lba.
 		 */
 		transfer_len = blk_rq_bytes(rq);
+		lba = scsi_get_lba(cmd);
 	}
 
 	intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
author maintainer
#14 lore raw

PATCH 14/124 net/sched: cls_u32: fix netns refcount changes in u32_change()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

commit 3db09e762dc79584a69c10d74a6b98f89a9979f8 upstream.

We are now able to detect extra put_net() at the moment they happen, instead of much later in correct code paths.

u32_init_knode() / tcf_exts_init() populates the ->exts.net pointer, but as mentioned in tcf_exts_init(),
the refcount on netns has not been elevated yet.

The refcount is taken only once tcf_exts_get_net() is called.

So the two u32_destroy_key() calls from u32_change() are attempting to release an invalid reference on the netns.

syzbot report:

refcount_t: decrement hit 0; leaking memory.

WARNING: CPU: 0 PID: 21708 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 21708 Comm: syz-executor.5 Not tainted 5.18.0-rc2-next-20220412-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 14 b6 b2 09 31 ff 89 de e8 6d e9 89 fd 84 db 75 e0 e8 84 e5 89 fd 48 c7 c7 40 aa 26 8a c6 05 f4 b5 b2 09 01 e8 e5 81 2e 05 <0f> 0b eb c4 e8 68 e5 89 fd 0f b6 1d e3 b5 b2 09 31 ff 89 de e8 38
RSP: 0018:ffffc900051af1b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff8160a0c8 RDI: fffff52000a35e28
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff81604a9e R11: 0000000000000000 R12: 1ffff92000a35e3b
R13: 00000000ffffffef R14: ffff8880211a0194 R15: ffff8880577d0a00
FS:  00007f25d183e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f19c859c028 CR3: 0000000051009000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x535/0x6b0 lib/ref_tracker.c:118
 netns_tracker_free include/net/net_namespace.h:327 [inline]
 put_net_track include/net/net_namespace.h:341 [inline]
 tcf_exts_put_net include/net/pkt_cls.h:255 [inline]
 u32_destroy_key.isra.0+0xa7/0x2b0 net/sched/cls_u32.c:394
 u32_change+0xe01/0x3140 net/sched/cls_u32.c:909
 tc_new_tfilter+0x98d/0x2200 net/sched/cls_api.c:2148
 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:6016
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2495
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f25d0689049
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f25d183e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f25d079c030 RCX: 00007f25d0689049
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000005
RBP: 00007f25d06e308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd0b752e3f R14: 00007f25d183e300 R15: 0000000000022000
 </TASK>
Fixes 35c55fc156d8 ("cls_u32: use tcf_exts_get_net() before call_rcu()")
Cc Cong Wang <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/cls_u32.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
net/sched/cls_u32.c +10 -6
@@ -386,14 +386,19 @@ static int u32_init(struct tcf_proto *tp
 	return 0;
 }
 
-static int u32_destroy_key(struct tc_u_knode *n, bool free_pf)
+static void __u32_destroy_key(struct tc_u_knode *n)
 {
 	struct tc_u_hnode *ht = rtnl_dereference(n->ht_down);
 
 	tcf_exts_destroy(&n->exts);
-	tcf_exts_put_net(&n->exts);
 	if (ht && --ht->refcnt == 0)
 		kfree(ht);
+	kfree(n);
+}
+
+static void u32_destroy_key(struct tc_u_knode *n, bool free_pf)
+{
+	tcf_exts_put_net(&n->exts);
 #ifdef CONFIG_CLS_U32_PERF
 	if (free_pf)
 		free_percpu(n->pf);
@@ -402,8 +407,7 @@ static int u32_destroy_key(struct tc_u_k
 	if (free_pf)
 		free_percpu(n->pcpu_success);
 #endif
-	kfree(n);
-	return 0;
+	__u32_destroy_key(n);
 }
 
 /* u32_delete_key_rcu should be called when free'ing a copied
@@ -898,13 +902,13 @@ static int u32_change(struct net *net, s
 				    tca[TCA_RATE], flags, extack);
 
 		if (err) {
-			u32_destroy_key(new, false);
+			__u32_destroy_key(new);
 			return err;
 		}
 
 		err = u32_replace_hw_knode(tp, new, flags, extack);
 		if (err) {
-			u32_destroy_key(new, false);
+			__u32_destroy_key(new);
 			return err;
 		}
 
author maintainer
#15 lore raw

PATCH 15/124 ALSA: usb-audio: Clear MIDI port active flag after draining

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 0665886ad1392e6b5bae85d7a6ccbed48dca1522 upstream.

When a rawmidi output stream is closed, it calls the drain at first, then does trigger-off only when the drain returns -ERESTARTSYS as a fallback. It implies that each driver should turn off the stream properly after the drain. Meanwhile, USB-audio MIDI interface didn't change the port->active flag after the drain. This may leave the output work picking up the port that is closed right now, which eventually leads to a use-after-free for the already released rawmidi object.

This patch fixes the bug by properly clearing the port->active flag after the output drain.

---
 sound/usb/midi.c |    1 +
 1 file changed, 1 insertion(+)
sound/usb/midi.c +1 -0
@@ -1194,6 +1194,7 @@ static void snd_usbmidi_output_drain(str
 		} while (drain_urbs && timeout);
 		finish_wait(&ep->drain_wait, &wait);
 	}
+	port->active = 0;
 	spin_unlock_irq(&ep->buffer_lock);
 }
 
author maintainer
#16 lore raw

PATCH 16/124 ALSA: hda/realtek: Add quirk for Clevo NP70PNP

In reply to Greg Kroah-Hartman

From: Tim Crawford <[email protected]>

commit 86222af07abf1f5f07a5873cc399c29ab8a9b8b8 upstream.

Fixes headset detection on Clevo NP70PNP.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -8962,6 +8962,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x866d, "Clevo NP5[05]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x867c, "Clevo NP7[01]PNP", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME),
author maintainer
#17 lore raw

PATCH 17/124 ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

[ Upstream commit c775cbf62ed4911e4f0f23880f01815753123690 ]

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the PCK0 output of the SoC, intended in the reference software to be supplied using PLLB and programmed to 12MHz. As originally written for use with a board file the audio driver was responsible for configuring the entire tree but in the conversion to the common clock framework the registration of the named pck0 and pllb clocks was removed so the driver has failed to instantiate ever since.

Since the WM8731 driver has had support for managing a MCLK provided via the common clock framework for some time we can simply drop all the clock management code from the machine driver other than configuration of the sysclk rate, the CODEC driver still respects that configuration from the machine driver.

Fixes ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
---
 sound/soc/atmel/sam9g20_wm8731.c | 61 --------------------------------
 1 file changed, 61 deletions(-)
sound/soc/atmel/sam9g20_wm8731.c +0 -61
index 8a55d59a6c2a..d243de5f23dc 100644
@@ -46,35 +46,6 @@
  */
 #undef ENABLE_MIC_INPUT
 
-static struct clk *mclk;
-
-static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
-					struct snd_soc_dapm_context *dapm,
-					enum snd_soc_bias_level level)
-{
-	static int mclk_on;
-	int ret = 0;
-
-	switch (level) {
-	case SND_SOC_BIAS_ON:
-	case SND_SOC_BIAS_PREPARE:
-		if (!mclk_on)
-			ret = clk_enable(mclk);
-		if (ret == 0)
-			mclk_on = 1;
-		break;
-
-	case SND_SOC_BIAS_OFF:
-	case SND_SOC_BIAS_STANDBY:
-		if (mclk_on)
-			clk_disable(mclk);
-		mclk_on = 0;
-		break;
-	}
-
-	return ret;
-}
-
 static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 	SND_SOC_DAPM_SPK("Ext Spk", NULL),
@@ -135,7 +106,6 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
 	.owner = THIS_MODULE,
 	.dai_link = &at91sam9g20ek_dai,
 	.num_links = 1,
-	.set_bias_level = at91sam9g20ek_set_bias_level,
 
 	.dapm_widgets = at91sam9g20ek_dapm_widgets,
 	.num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
@@ -148,7 +118,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *codec_np, *cpu_np;
-	struct clk *pllb;
 	struct snd_soc_card *card = &snd_soc_at91sam9g20ek;
 	int ret;
 
@@ -162,31 +131,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/*
-	 * Codec MCLK is supplied by PCK0 - set it up.
-	 */
-	mclk = clk_get(NULL, "pck0");
-	if (IS_ERR(mclk)) {
-		dev_err(&pdev->dev, "Failed to get MCLK\n");
-		ret = PTR_ERR(mclk);
-		goto err;
-	}
-
-	pllb = clk_get(NULL, "pllb");
-	if (IS_ERR(pllb)) {
-		dev_err(&pdev->dev, "Failed to get PLLB\n");
-		ret = PTR_ERR(pllb);
-		goto err_mclk;
-	}
-	ret = clk_set_parent(mclk, pllb);
-	clk_put(pllb);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "Failed to set MCLK parent\n");
-		goto err_mclk;
-	}
-
-	clk_set_rate(mclk, MCLK_RATE);
-
 	card->dev = &pdev->dev;
 
 	/* Parse device node info */
@@ -230,9 +174,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
 
 	return ret;
 
-err_mclk:
-	clk_put(mclk);
-	mclk = NULL;
 err:
 	atmel_ssc_put_audio(0);
 	return ret;
@@ -242,8 +183,6 @@ static int at91sam9g20ek_audio_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
 
-	clk_disable(mclk);
-	mclk = NULL;
 	snd_soc_unregister_card(card);
 	atmel_ssc_put_audio(0);
 
Signature · 1 line
2.35.1
author maintainer
#18 lore raw

PATCH 18/124 ASoC: topology: Correct error handling in soc_tplg_dapm_widget_create()

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 9c363532413cda3e2c6dfa10e5cca7cd221877a0 ]

Academic correction of error handling:
In case the allocation of kc or kcontrol_type fails the correct label to jump is hdr_err since the template.sname has been also allocated at this point.

Fixes d29d41e28eea6 ("ASoC: topology: Add support for multiple kcontrol types to a widget")
---
 sound/soc/soc-topology.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/soc-topology.c +2 -2
index 561eddfc8c22..eff8d4f71561 100644
@@ -1481,12 +1481,12 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg,
 	template.num_kcontrols = le32_to_cpu(w->num_kcontrols);
 	kc = devm_kcalloc(tplg->dev, le32_to_cpu(w->num_kcontrols), sizeof(*kc), GFP_KERNEL);
 	if (!kc)
-		goto err;
+		goto hdr_err;
 
 	kcontrol_type = devm_kcalloc(tplg->dev, le32_to_cpu(w->num_kcontrols), sizeof(unsigned int),
 				     GFP_KERNEL);
 	if (!kcontrol_type)
-		goto err;
+		goto hdr_err;
 
 	for (i = 0; i < w->num_kcontrols; i++) {
 		control_hdr = (struct snd_soc_tplg_ctl_hdr *)tplg->pos;
Signature · 1 line
2.35.1
author maintainer
#19 lore raw

PATCH 19/124 ASoC: rk817: Use devm_clk_get() in rk817_platform_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 8ba08d3a367a70f707b7c5d53ad92b98b960ee88 ]

We need to call clk_put() to undo clk_get() in the error path. Use devm_clk_get() to obtain a reference to the clock, It has the benefit that clk_put() is no longer required.

Fixes 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support")
---
 sound/soc/codecs/rk817_codec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rk817_codec.c +1 -1
index 8fffe378618d..cce6f4e7992f 100644
@@ -489,7 +489,7 @@ static int rk817_platform_probe(struct platform_device *pdev)
 
 	rk817_codec_parse_dt_property(&pdev->dev, rk817_codec_data);
 
-	rk817_codec_data->mclk = clk_get(pdev->dev.parent, "mclk");
+	rk817_codec_data->mclk = devm_clk_get(pdev->dev.parent, "mclk");
 	if (IS_ERR(rk817_codec_data->mclk)) {
 		dev_dbg(&pdev->dev, "Unable to get mclk\n");
 		ret = -ENXIO;
Signature · 1 line
2.35.1
author maintainer
#20 lore raw

PATCH 20/124 ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_component

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit e927b05f3cc20de87f6b7d912a5bbe556931caca ]

devm_snd_soc_register_component() may fails, we should check the error and do the corresponding error handling.

Fixes 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
---
 sound/soc/codecs/msm8916-wcd-digital.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
sound/soc/codecs/msm8916-wcd-digital.c +8 -1
index 9ad7fc0baf07..20a07c92b2fc 100644
@@ -1206,9 +1206,16 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, priv);
 
-	return devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
+	ret = devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
 				      msm8916_wcd_digital_dai,
 				      ARRAY_SIZE(msm8916_wcd_digital_dai));
+	if (ret)
+		goto err_mclk;
+
+	return 0;
+
+err_mclk:
+	clk_disable_unprepare(priv->mclk);
 err_clk:
 	clk_disable_unprepare(priv->ahbclk);
 	return ret;
Signature · 1 line
2.35.1
author maintainer
#21 lore raw

PATCH 21/124 ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

[ Upstream commit db6dd1bee63d1d88fbddfe07af800af5948ac28e ]

SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital circuits along with internal memory, powering off this is the last thing that codec should do when going to very low power.

Current code was powering off this Buck if there are no users of sysclk, which is not correct. Powering off this buck will result in no register access. This code path was never tested until recently after adding pm support in SoundWire controller. Fix this by removing the buck poweroff when the codec is active and also the code that is not used.

Without this patch all the read/write transactions will never complete and results in SLIMBus Errors like:

qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110 wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock

	on wcd934x-codec.1.auto for register: [0x00000d05] -110

qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000

---
 sound/soc/codecs/wcd934x.c | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)
sound/soc/codecs/wcd934x.c +1 -25
index 7b99318070cf..144046864d15 100644
@@ -1274,29 +1274,7 @@ static int wcd934x_set_sido_input_src(struct wcd934x_codec *wcd, int sido_src)
 	if (sido_src == wcd->sido_input_src)
 		return 0;
 
-	if (sido_src == SIDO_SOURCE_INTERNAL) {
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
-				   WCD934X_ANA_BUCK_HI_ACCU_EN_MASK, 0);
-		usleep_range(100, 110);
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
-				   WCD934X_ANA_BUCK_HI_ACCU_PRE_ENX_MASK, 0x0);
-		usleep_range(100, 110);
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_RCO,
-				   WCD934X_ANA_RCO_BG_EN_MASK, 0);
-		usleep_range(100, 110);
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
-				   WCD934X_ANA_BUCK_PRE_EN1_MASK,
-				   WCD934X_ANA_BUCK_PRE_EN1_ENABLE);
-		usleep_range(100, 110);
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
-				   WCD934X_ANA_BUCK_PRE_EN2_MASK,
-				   WCD934X_ANA_BUCK_PRE_EN2_ENABLE);
-		usleep_range(100, 110);
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
-				   WCD934X_ANA_BUCK_HI_ACCU_EN_MASK,
-				   WCD934X_ANA_BUCK_HI_ACCU_ENABLE);
-		usleep_range(100, 110);
-	} else if (sido_src == SIDO_SOURCE_RCO_BG) {
+	if (sido_src == SIDO_SOURCE_RCO_BG) {
 		regmap_update_bits(wcd->regmap, WCD934X_ANA_RCO,
 				   WCD934X_ANA_RCO_BG_EN_MASK,
 				   WCD934X_ANA_RCO_BG_ENABLE);
@@ -1382,8 +1360,6 @@ static int wcd934x_disable_ana_bias_and_syclk(struct wcd934x_codec *wcd)
 	regmap_update_bits(wcd->regmap, WCD934X_CLK_SYS_MCLK_PRG,
 			   WCD934X_EXT_CLK_BUF_EN_MASK |
 			   WCD934X_MCLK_EN_MASK, 0x0);
-	wcd934x_set_sido_input_src(wcd, SIDO_SOURCE_INTERNAL);
-
 	regmap_update_bits(wcd->regmap, WCD934X_ANA_BIAS,
 			   WCD934X_ANA_BIAS_EN_MASK, 0);
 	regmap_update_bits(wcd->regmap, WCD934X_ANA_BIAS,
Signature · 1 line
2.35.1
author maintainer
#22 lore raw

PATCH 22/124 dmaengine: idxd: fix device cleanup on disable

In reply to Greg Kroah-Hartman

From: Dave Jiang <[email protected]>

[ Upstream commit 12e45e89556d7a532120f976081e9e7582addd2b ]

There are certain parts of WQ that needs to be cleaned up even after WQ is disabled during the device disable. Those are the unchangeable parts for a WQ when the device is still enabled. Move the cleanup outside of WQ state check. Remove idxd_wq_disable_cleanup() inside idxd_wq_device_reset_cleanup() since only the unchangeable parts need to be cleared.

---
 drivers/dma/idxd/device.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/dma/idxd/device.c +1 -2
index 7bd9ac1e93b2..a67bafc596b7 100644
@@ -406,7 +406,6 @@ static void idxd_wq_device_reset_cleanup(struct idxd_wq *wq)
 {
 	lockdep_assert_held(&wq->wq_lock);
 
-	idxd_wq_disable_cleanup(wq);
 	wq->size = 0;
 	wq->group = NULL;
 }
@@ -723,9 +722,9 @@ static void idxd_device_wqs_clear_state(struct idxd_device *idxd)
 
 		if (wq->state == IDXD_WQ_ENABLED) {
 			idxd_wq_disable_cleanup(wq);
-			idxd_wq_device_reset_cleanup(wq);
 			wq->state = IDXD_WQ_DISABLED;
 		}
+		idxd_wq_device_reset_cleanup(wq);
 	}
 }
 
Signature · 1 line
2.35.1
author maintainer
#23 lore raw

PATCH 23/124 dmaengine: imx-sdma: Fix error checking in sdma_event_remap

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 7104b9cb35a33ad803a1adbbfa50569b008faf15 ]

of_parse_phandle() returns NULL on errors, rather than error pointers. Using NULL check on grp_np to fix this.

Fixes d078cd1b4185 ("dmaengine: imx-sdma: Add imx6sx platform support")
---
 drivers/dma/imx-sdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/imx-sdma.c +2 -2
index cacc725ca545..263f0466b1b8 100644
@@ -1869,7 +1869,7 @@ static int sdma_event_remap(struct sdma_engine *sdma)
 	u32 reg, val, shift, num_map, i;
 	int ret = 0;
 
-	if (IS_ERR(np) || IS_ERR(gpr_np))
+	if (IS_ERR(np) || !gpr_np)
 		goto out;
 
 	event_remap = of_find_property(np, propname, NULL);
@@ -1917,7 +1917,7 @@ static int sdma_event_remap(struct sdma_engine *sdma)
 	}
 
 out:
-	if (!IS_ERR(gpr_np))
+	if (gpr_np)
 		of_node_put(gpr_np);
 
 	return ret;
Signature · 1 line
2.35.1
author maintainer
#24 lore raw

PATCH 24/124 dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources

In reply to Greg Kroah-Hartman

From: zhangqilong <[email protected]>

[ Upstream commit 545b2baac89b859180e51215468c05d85ea8465a ]

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it:
1) Replacing it with pm_runtime_resume_and_get to keep usage counter balanced.
2) Add putting operation before returning error.

Fixes 9135408c3ace4 ("dmaengine: mediatek: Add MediaTek UART APDMA support")
---
 drivers/dma/mediatek/mtk-uart-apdma.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/dma/mediatek/mtk-uart-apdma.c +6 -3
index 375e7e647df6..a1517ef1f4a0 100644
@@ -274,7 +274,7 @@ static int mtk_uart_apdma_alloc_chan_resources(struct dma_chan *chan)
 	unsigned int status;
 	int ret;
 
-	ret = pm_runtime_get_sync(mtkd->ddev.dev);
+	ret = pm_runtime_resume_and_get(mtkd->ddev.dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(chan->device->dev);
 		return ret;
@@ -288,18 +288,21 @@ static int mtk_uart_apdma_alloc_chan_resources(struct dma_chan *chan)
 	ret = readx_poll_timeout(readl, c->base + VFF_EN,
 			  status, !status, 10, 100);
 	if (ret)
-		return ret;
+		goto err_pm;
 
 	ret = request_irq(c->irq, mtk_uart_apdma_irq_handler,
 			  IRQF_TRIGGER_NONE, KBUILD_MODNAME, chan);
 	if (ret < 0) {
 		dev_err(chan->device->dev, "Can't request dma IRQ\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_pm;
 	}
 
 	if (mtkd->support_33bits)
 		mtk_uart_apdma_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
 
+err_pm:
+	pm_runtime_put_noidle(mtkd->ddev.dev);
 	return ret;
 }
 
Signature · 1 line
2.35.1
author maintainer
#25 lore raw

PATCH 25/124 dmaengine: dw-edma: Fix unaligned 64bit access

In reply to Greg Kroah-Hartman

From: Herve Codina <[email protected]>

[ Upstream commit 8fc5133d6d4da65cad6b73152fc714ad3d7f91c1 ]

On some arch (ie aarch64 iMX8MM) unaligned PCIe accesses are not allowed and lead to a kernel Oops.

  [ 1911.668835] Unable to handle kernel paging request at virtual address ffff80001bc00a8c
  [ 1911.668841] Mem abort info:
  [ 1911.668844]   ESR = 0x96000061
  [ 1911.668847]   EC = 0x25: DABT (current EL), IL = 32 bits
  [ 1911.668850]   SET = 0, FnV = 0
  [ 1911.668852]   EA = 0, S1PTW = 0
  [ 1911.668853] Data abort info:
  [ 1911.668855]   ISV = 0, ISS = 0x00000061
  [ 1911.668857]   CM = 0, WnR = 1
  [ 1911.668861] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000040ff4000
  [ 1911.668864] [ffff80001bc00a8c] pgd=00000000bffff003, pud=00000000bfffe003, pmd=0068000018400705
  [ 1911.668872] Internal error: Oops: 96000061 [#1] PREEMPT SMP
  ...

The llp register present in the channel group registers is not aligned on 64bit.

Fix unaligned 64bit access using two 32bit accesses

Fixes 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
---
 drivers/dma/dw-edma/dw-edma-v0-core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/dma/dw-edma/dw-edma-v0-core.c +5 -2
index 329fc2e57b70..b5b8f8181e77 100644
@@ -415,8 +415,11 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 			  (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE));
 		/* Linked list */
 		#ifdef CONFIG_64BIT
-			SET_CH_64(dw, chan->dir, chan->id, llp.reg,
-				  chunk->ll_region.paddr);
+			/* llp is not aligned on 64bit -> keep 32bit accesses */
+			SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
+				  lower_32_bits(chunk->ll_region.paddr));
+			SET_CH_32(dw, chan->dir, chan->id, llp.msb,
+				  upper_32_bits(chunk->ll_region.paddr));
 		#else /* CONFIG_64BIT */
 			SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
 				  lower_32_bits(chunk->ll_region.paddr));
Signature · 1 line
2.35.1
author maintainer
#26 lore raw

PATCH 26/124 spi: spi-mtk-nor: initialize spi controller after resume

In reply to Greg Kroah-Hartman

From: Allen-KH Cheng <[email protected]>

[ Upstream commit 317c2045618cc1f8d38beb8c93a7bdb6ad8638c6 ]

After system resumes, the registers of nor controller are initialized with default values. The nor controller will not function properly.

To handle both issues above, we add mtk_nor_init() in mtk_nor_resume after pm_runtime_force_resume().

Fixes 3bfd9103c7af ("spi: spi-mtk-nor: Add power management support")
---
 drivers/spi/spi-mtk-nor.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/spi/spi-mtk-nor.c +11 -1
index 5c93730615f8..6d203477c04b 100644
@@ -909,7 +909,17 @@ static int __maybe_unused mtk_nor_suspend(struct device *dev)
 
 static int __maybe_unused mtk_nor_resume(struct device *dev)
 {
-	return pm_runtime_force_resume(dev);
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+	struct mtk_nor *sp = spi_controller_get_devdata(ctlr);
+	int ret;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
+	mtk_nor_init(sp);
+
+	return 0;
 }
 
 static const struct dev_pm_ops mtk_nor_pm_ops = {
Signature · 1 line
2.35.1
author maintainer
#27 lore raw

PATCH 27/124 esp: limit skb_page_frag_refill use to a single page

In reply to Greg Kroah-Hartman

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 5bd8baab087dff657e05387aee802e70304cc813 ]

Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch.

This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len).

Fixes cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
---
 include/net/esp.h | 2 --
 net/ipv4/esp4.c   | 5 ++---
 net/ipv6/esp6.c   | 5 ++---
 3 files changed, 4 insertions(+), 8 deletions(-)
include/net/esp.h +0 -2
index 90cd02ff77ef..9c5637d41d95 100644
@@ -4,8 +4,6 @@
 
 #include <linux/skbuff.h>
 
-#define ESP_SKB_FRAG_MAXSIZE (PAGE_SIZE << SKB_FRAG_PAGE_ORDER)
-
 struct ip_esp_hdr;
 
 static inline struct ip_esp_hdr *ip_esp_hdr(const struct sk_buff *skb)
net/ipv4/esp4.c +2 -3
index 70e6c87fbe3d..d747166bb291 100644
@@ -446,7 +446,6 @@ int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *
 	struct page *page;
 	struct sk_buff *trailer;
 	int tailen = esp->tailen;
-	unsigned int allocsz;
 
 	/* this is non-NULL only with TCP/UDP Encapsulation */
 	if (x->encap) {
@@ -456,8 +455,8 @@ int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *
 			return err;
 	}
 
-	allocsz = ALIGN(skb->data_len + tailen, L1_CACHE_BYTES);
-	if (allocsz > ESP_SKB_FRAG_MAXSIZE)
+	if (ALIGN(tailen, L1_CACHE_BYTES) > PAGE_SIZE ||
+	    ALIGN(skb->data_len, L1_CACHE_BYTES) > PAGE_SIZE)
 		goto cow;
 
 	if (!skb_cloned(skb)) {
net/ipv6/esp6.c +2 -3
index 5023f59a5b96..6219d97cac7a 100644
@@ -483,7 +483,6 @@ int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	struct page *page;
 	struct sk_buff *trailer;
 	int tailen = esp->tailen;
-	unsigned int allocsz;
 
 	if (x->encap) {
 		int err = esp6_output_encap(x, skb, esp);
@@ -492,8 +491,8 @@ int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 			return err;
 	}
 
-	allocsz = ALIGN(skb->data_len + tailen, L1_CACHE_BYTES);
-	if (allocsz > ESP_SKB_FRAG_MAXSIZE)
+	if (ALIGN(tailen, L1_CACHE_BYTES) > PAGE_SIZE ||
+	    ALIGN(skb->data_len, L1_CACHE_BYTES) > PAGE_SIZE)
 		goto cow;
 
 	if (!skb_cloned(skb)) {
Signature · 1 line
2.35.1
author maintainer
#28 lore raw

PATCH 28/124 spi: cadence-quadspi: fix incorrect supports_op() return value

In reply to Greg Kroah-Hartman

From: Matthias Schiffer <[email protected]>

[ Upstream commit f1d388f216aeb41a5df518815ae559d14a6d438e ]

Since the conversion to spi-mem, the driver advertised support for various operations that cqspi_set_protocol() was never expected to handle correctly - in particuar all non-DTR operations with command or address buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as cqspi_set_protocol() returns -EINVAL.

In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that support such operations. As a minimal fix that can be backported to stable kernels, simply disallow the unsupported operations again to avoid this issue.

Fixes a314f6367787 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework")
---
 drivers/spi/spi-cadence-quadspi.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/spi/spi-cadence-quadspi.c +17 -2
index 1a6294a06e72..75680eecd2f7 100644
@@ -1226,9 +1226,24 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem,
 	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
 		    !op->data.dtr;
 
-	/* Mixed DTR modes not supported. */
-	if (!(all_true || all_false))
+	if (all_true) {
+		/* Right now we only support 8-8-8 DTR mode. */
+		if (op->cmd.nbytes && op->cmd.buswidth != 8)
+			return false;
+		if (op->addr.nbytes && op->addr.buswidth != 8)
+			return false;
+		if (op->data.nbytes && op->data.buswidth != 8)
+			return false;
+	} else if (all_false) {
+		/* Only 1-1-X ops are supported without DTR */
+		if (op->cmd.nbytes && op->cmd.buswidth > 1)
+			return false;
+		if (op->addr.nbytes && op->addr.buswidth > 1)
+			return false;
+	} else {
+		/* Mixed DTR modes are not supported. */
 		return false;
+	}
 
 	if (all_true)
 		return spi_mem_dtr_supports_op(mem, op);
Signature · 1 line
2.35.1
author maintainer
#29 lore raw

PATCH 29/124 igc: Fix infinite loop in release_swfw_sync

In reply to Greg Kroah-Hartman

From: Sasha Neftin <[email protected]>

[ Upstream commit 907862e9aef75bf89e2b265efcc58870be06081e ]

An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release.
This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit.

Fixes c0071c7aa5fe ("igc: Add HW initialization code")
---
 drivers/net/ethernet/intel/igc/igc_i225.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/igc/igc_i225.c +9 -2
index b6807e16eea9..a0e2a404d535 100644
@@ -156,8 +156,15 @@ void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask)
 {
 	u32 swfw_sync;
 
-	while (igc_get_hw_semaphore_i225(hw))
-		; /* Empty */
+	/* Releasing the resource requires first getting the HW semaphore.
+	 * If we fail to get the semaphore, there is nothing we can do,
+	 * except log an error and quit. We are not allowed to hang here
+	 * indefinitely, as it may cause denial of service or system crash.
+	 */
+	if (igc_get_hw_semaphore_i225(hw)) {
+		hw_dbg("Failed to release SW_FW_SYNC.\n");
+		return;
+	}
 
 	swfw_sync = rd32(IGC_SW_FW_SYNC);
 	swfw_sync &= ~mask;
Signature · 1 line
2.35.1
author maintainer
#30 lore raw

PATCH 30/124 igc: Fix BUG: scheduling while atomic

In reply to Greg Kroah-Hartman

From: Sasha Neftin <[email protected]>

[ Upstream commit c80a29f0fe9b6f5457e0788e27d1110577eba99b ]

Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions.

The following issue can be seen by doing the following:

$ modprobe -r bonding
$ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0
$ ip link set bond0 up
$ ifenslave bond0 eth0 eth1
[  982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002
[  982.364431] INFO: lockdep is turned off.
[  982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding]
[  982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G        W        --------- -  - 4.18.0-348.el8.x86_64+debug #1
[  982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017
[  982.459791] Workqueue: bond0 bond_mii_monitor [bonding]
[  982.465622] Call Trace:
[  982.468355]  dump_stack+0x8e/0xd0
[  982.472056]  __schedule_bug.cold.60+0x3a/0x60
[  982.476919]  __schedule+0x147b/0x1bc0
[  982.481007]  ? firmware_map_remove+0x16b/0x16b
[  982.485967]  ? hrtimer_fixup_init+0x40/0x40
[  982.490625]  schedule+0xd9/0x250
[  982.494227]  schedule_hrtimeout_range_clock+0x10d/0x2c0
[  982.500058]  ? hrtimer_nanosleep_restart+0x130/0x130
[  982.505598]  ? hrtimer_init_sleeper_on_stack+0x90/0x90
[  982.511332]  ? usleep_range+0x88/0x130
[  982.515514]  ? recalibrate_cpu_khz+0x10/0x10
[  982.520279]  ? ktime_get+0xab/0x1c0
[  982.524175]  ? usleep_range+0x88/0x130
[  982.528355]  usleep_range+0xdd/0x130
[  982.532344]  ? console_conditional_schedule+0x30/0x30
[  982.537987]  ? igc_put_hw_semaphore+0x17/0x60 [igc]
[  982.543432]  igc_read_phy_reg_gpy+0x111/0x2b0 [igc]
[  982.548887]  igc_phy_has_link+0xfa/0x260 [igc]
[  982.553847]  ? igc_get_phy_id+0x210/0x210 [igc]
[  982.558894]  ? lock_acquire+0x34d/0x890
[  982.563187]  ? lock_downgrade+0x710/0x710
[  982.567659]  ? rcu_read_unlock+0x50/0x50
[  982.572039]  igc_check_for_copper_link+0x106/0x210 [igc]
[  982.577970]  ? igc_config_fc_after_link_up+0x840/0x840 [igc]
[  982.584286]  ? rcu_read_unlock+0x50/0x50
[  982.588661]  ? lock_release+0x591/0xb80
[  982.592939]  ? lock_release+0x591/0xb80
[  982.597220]  igc_has_link+0x113/0x330 [igc]
[  982.601887]  ? lock_downgrade+0x710/0x710
[  982.606362]  igc_ethtool_get_link+0x6d/0x90 [igc]
[  982.611614]  bond_check_dev_link+0x131/0x2c0 [bonding]
[  982.617350]  ? bond_time_in_interval+0xd0/0xd0 [bonding]
[  982.623277]  ? rcu_read_lock_held+0x62/0xc0
[  982.627944]  ? rcu_read_lock_sched_held+0xe0/0xe0
[  982.633198]  bond_mii_monitor+0x314/0x2500 [bonding]
[  982.638738]  ? lock_contended+0x880/0x880
[  982.643214]  ? bond_miimon_link_change+0xa0/0xa0 [bonding]
[  982.649336]  ? lock_acquire+0x34d/0x890
[  982.653615]  ? lock_downgrade+0x710/0x710
[  982.658089]  ? debug_object_deactivate+0x221/0x340
[  982.663436]  ? rcu_read_unlock+0x50/0x50
[  982.667811]  ? debug_print_object+0x2b0/0x2b0
[  982.672672]  ? __switch_to_asm+0x41/0x70
[  982.677049]  ? __switch_to_asm+0x35/0x70
[  982.681426]  ? _raw_spin_unlock_irq+0x24/0x40
[  982.686288]  ? trace_hardirqs_on+0x20/0x195
[  982.690956]  ? _raw_spin_unlock_irq+0x24/0x40
[  982.695818]  process_one_work+0x8f0/0x1770
[  982.700390]  ? pwq_dec_nr_in_flight+0x320/0x320
[  982.705443]  ? debug_show_held_locks+0x50/0x50
[  982.710403]  worker_thread+0x87/0xb40
[  982.714489]  ? process_one_work+0x1770/0x1770
[  982.719349]  kthread+0x344/0x410
[  982.722950]  ? kthread_insert_work_sanity_check+0xd0/0xd0
[  982.728975]  ret_from_fork+0x3a/0x50
---
 drivers/net/ethernet/intel/igc/igc_phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/igc/igc_phy.c +2 -2
index 40dbf4b43234..6961f65d36b9 100644
@@ -581,7 +581,7 @@ static s32 igc_read_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 *data)
 	 * the lower time out
 	 */
 	for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) {
-		usleep_range(500, 1000);
+		udelay(50);
 		mdic = rd32(IGC_MDIC);
 		if (mdic & IGC_MDIC_READY)
 			break;
@@ -638,7 +638,7 @@ static s32 igc_write_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 data)
 	 * the lower time out
 	 */
 	for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) {
-		usleep_range(500, 1000);
+		udelay(50);
 		mdic = rd32(IGC_MDIC);
 		if (mdic & IGC_MDIC_READY)
 			break;
Signature · 1 line
2.35.1
author maintainer
#31 lore raw

PATCH 31/124 igc: Fix suspending when PTM is active

In reply to Greg Kroah-Hartman

From: Vinicius Costa Gomes <[email protected]>

[ Upstream commit 822f52e7efdc88fccffb9fbf6250a4b7666a0b0f ]

Some mainboard/CPU combinations, in particular, Alder Lake-S with a W680 mainboard, have shown problems (system hangs usually, no kernel logs) with suspend/resume when PCIe PTM is enabled and active. In some cases, it could be reproduced when removing the igc module.

The best we can do is to stop PTM dialogs from the downstream/device side before the interface is brought down. PCIe PTM will be re-enabled when the interface is being brought up.

Fixes a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
---
 drivers/net/ethernet/intel/igc/igc_ptp.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/igc/igc_ptp.c +14 -1
index 4f9245aa79a1..8e521f99b80a 100644
@@ -996,6 +996,17 @@ static void igc_ptp_time_restore(struct igc_adapter *adapter)
 	igc_ptp_write_i225(adapter, &ts);
 }
 
+static void igc_ptm_stop(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 ctrl;
+
+	ctrl = rd32(IGC_PTM_CTRL);
+	ctrl &= ~IGC_PTM_CTRL_EN;
+
+	wr32(IGC_PTM_CTRL, ctrl);
+}
+
 /**
  * igc_ptp_suspend - Disable PTP work items and prepare for suspend
  * @adapter: Board private structure
@@ -1013,8 +1024,10 @@ void igc_ptp_suspend(struct igc_adapter *adapter)
 	adapter->ptp_tx_skb = NULL;
 	clear_bit_unlock(__IGC_PTP_TX_IN_PROGRESS, &adapter->state);
 
-	if (pci_device_is_present(adapter->pdev))
+	if (pci_device_is_present(adapter->pdev)) {
 		igc_ptp_time_save(adapter);
+		igc_ptm_stop(adapter);
+	}
 }
 
 /**
Signature · 1 line
2.35.1
author maintainer
#32 lore raw

PATCH 32/124 ALSA: hda/hdmi: fix warning about PCM count when used with SOF

In reply to Greg Kroah-Hartman

From: Kai Vehmanen <[email protected]>

[ Upstream commit c74193787b2f683751a67603fb5f15c7584f355f ]

With commit 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically"), old behaviour to consider the HDA pin number, when choosing PCM to assign, was dropped.

Build on this change and limit the number of PCMs created to number of converters (= maximum number of concurrent display/receivers) when "mst_no_extra_pcms" and "dyn_pcm_no_legacy" quirks are both set.

Fix the check in hdmi_find_pcm_slot() to ensure only spec->pcm_used entries are considered in the search. Elsewhere in the driver spec->pcm_used is already checked properly.

Doing this avoids following warning at SOF driver probe for multiple machine drivers:

[  112.425297] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 4
[  112.425298] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 5
[  112.425299] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no

PCM in topology for HDMI converter 6

Fixes 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically")
---
 sound/pci/hda/patch_hdmi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
sound/pci/hda/patch_hdmi.c +4 -2
index 472d81679a27..24da843f39a1 100644
@@ -1387,7 +1387,7 @@ static int hdmi_find_pcm_slot(struct hdmi_spec *spec,
 
  last_try:
 	/* the last try; check the empty slots in pins */
-	for (i = 0; i < spec->num_nids; i++) {
+	for (i = 0; i < spec->pcm_used; i++) {
 		if (!test_bit(i, &spec->pcm_bitmap))
 			return i;
 	}
@@ -2263,7 +2263,9 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec)
 	 * dev_num is the device entry number in a pin
 	 */
 
-	if (codec->mst_no_extra_pcms)
+	if (spec->dyn_pcm_no_legacy && codec->mst_no_extra_pcms)
+		pcm_num = spec->num_cvts;
+	else if (codec->mst_no_extra_pcms)
 		pcm_num = spec->num_nids;
 	else
 		pcm_num = spec->num_nids + spec->dev_num - 1;
Signature · 1 line
2.35.1
author maintainer
#33 lore raw

PATCH 33/124 rxrpc: Restore removed timer deletion

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit ee3b0826b4764f6c13ad6db67495c5a1c38e9025 ]

A recent patch[1] from Eric Dumazet flipped the order in which the keepalive timer and the keepalive worker were cancelled in order to fix a syzbot reported issue[2]. Unfortunately, this enables the mirror image bug whereby the timer races with rxrpc_exit_net(), restarting the worker after it has been cancelled:

	CPU 1		CPU 2
	===============	=====================
			if (rxnet->live)
			<INTERRUPT>
	rxnet->live = false;
 	cancel_work_sync(&rxnet->peer_keepalive_work);
			rxrpc_queue_work(&rxnet->peer_keepalive_work);
	del_timer_sync(&rxnet->peer_keepalive_timer);

Fix this by restoring the removed del_timer_sync() so that we try to remove the timer twice. If the timer runs again, it should see ->live == false and not restart the worker.

---
 net/rxrpc/net_ns.c | 2 ++
 1 file changed, 2 insertions(+)
net/rxrpc/net_ns.c +2 -0
index f15d6942da45..cc7e30733feb 100644
@@ -113,7 +113,9 @@ static __net_exit void rxrpc_exit_net(struct net *net)
 	struct rxrpc_net *rxnet = rxrpc_net(net);
 
 	rxnet->live = false;
+	del_timer_sync(&rxnet->peer_keepalive_timer);
 	cancel_work_sync(&rxnet->peer_keepalive_work);
+	/* Remove the timer again as the worker may have restarted it. */
 	del_timer_sync(&rxnet->peer_keepalive_timer);
 	rxrpc_destroy_all_calls(rxnet);
 	rxrpc_destroy_all_connections(rxnet);
Signature · 1 line
2.35.1
author maintainer
#34 lore raw

PATCH 34/124 net/smc: Fix sock leak when release after smc_shutdown()

In reply to Greg Kroah-Hartman

From: Tony Lu <[email protected]>

[ Upstream commit 1a74e99323746353bba11562a2f2d0aa8102f402 ]

Since commit e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback"), for a fallback connection, __smc_release() does not call sock_put() if its state is already SMC_CLOSED.

When calling smc_shutdown() after falling back, its state is set to SMC_CLOSED but does not call sock_put(), so this patch calls it.

Reported-and-tested-by [email protected]
Fixes e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback")
---
 net/smc/af_smc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/smc/af_smc.c +3 -1
index fa8897497dcc..499058248bdb 100644
@@ -2332,8 +2332,10 @@ static int smc_shutdown(struct socket *sock, int how)
 	if (smc->use_fallback) {
 		rc = kernel_sock_shutdown(smc->clcsock, how);
 		sk->sk_shutdown = smc->clcsock->sk->sk_shutdown;
-		if (sk->sk_shutdown == SHUTDOWN_MASK)
+		if (sk->sk_shutdown == SHUTDOWN_MASK) {
 			sk->sk_state = SMC_CLOSED;
+			sock_put(sk);
+		}
 		goto out;
 	}
 	switch (how) {
Signature · 1 line
2.35.1
author maintainer
#35 lore raw

PATCH 35/124 net/packet: fix packet_sock xmit return value checking

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit 29e8e659f984be00d75ec5fef4e37c88def72712 ]

packet_sock xmit could be dev_queue_xmit, which also returns negative errors. So only checking positive errors is not enough, or userspace sendmsg may return success while packet is not send out.

Move the net_xmit_errno() assignment in the braces as checkpatch.pl said do not use assignment in if condition.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/packet/af_packet.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
net/packet/af_packet.c +9 -4
index c0d4a65931de..88c3b5cf8d94 100644
@@ -2820,8 +2820,9 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
 
 		status = TP_STATUS_SEND_REQUEST;
 		err = po->xmit(skb);
-		if (unlikely(err > 0)) {
-			err = net_xmit_errno(err);
+		if (unlikely(err != 0)) {
+			if (err > 0)
+				err = net_xmit_errno(err);
 			if (err && __packet_get_status(po, ph) ==
 				   TP_STATUS_AVAILABLE) {
 				/* skb was destructed already */
@@ -3022,8 +3023,12 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len)
 		skb->no_fcs = 1;
 
 	err = po->xmit(skb);
-	if (err > 0 && (err = net_xmit_errno(err)) != 0)
-		goto out_unlock;
+	if (unlikely(err != 0)) {
+		if (err > 0)
+			err = net_xmit_errno(err);
+		if (err)
+			goto out_unlock;
+	}
 
 	dev_put(dev);
 
Signature · 1 line
2.35.1
author maintainer
#36 lore raw

PATCH 36/124 ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()

In reply to Greg Kroah-Hartman

From: Peilin Ye <[email protected]>

[ Upstream commit f40c064e933d7787ca7411b699504d7a2664c1f5 ]

Do not update tunnel->tun_hlen in data plane code. Use a local variable instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().

---
 net/ipv6/ip6_gre.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv6/ip6_gre.c +3 -2
index 466a5610e3ca..288720838329 100644
@@ -743,6 +743,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		struct ip_tunnel_info *tun_info;
 		const struct ip_tunnel_key *key;
 		__be16 flags;
+		int tun_hlen;
 
 		tun_info = skb_tunnel_info_txcheck(skb);
 		if (IS_ERR(tun_info) ||
@@ -760,9 +761,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		dsfield = key->tos;
 		flags = key->tun_flags &
 			(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
-		tunnel->tun_hlen = gre_calc_hlen(flags);
+		tun_hlen = gre_calc_hlen(flags);
 
-		gre_build_header(skb, tunnel->tun_hlen,
+		gre_build_header(skb, tun_hlen,
 				 flags, protocol,
 				 tunnel_id_to_key32(tun_info->key.tun_id),
 				 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
Signature · 1 line
2.35.1
author maintainer
#37 lore raw

PATCH 37/124 ip6_gre: Fix skb_under_panic in __gre6_xmit()

In reply to Greg Kroah-Hartman

From: Peilin Ye <[email protected]>

[ Upstream commit ab198e1d0dd8dc4bc7575fb50758e2cbd51e14e1 ]

Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:

[   82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[   82.607380] Call Trace:
[   82.609389]  <TASK>
[   82.611136]  skb_push.cold.109+0x10/0x10
[   82.614289]  __gre6_xmit+0x41e/0x590
[   82.617169]  ip6gre_tunnel_xmit+0x344/0x3f0
[   82.620526]  dev_hard_start_xmit+0xf1/0x330
[   82.623882]  sch_direct_xmit+0xe4/0x250
[   82.626961]  __dev_queue_xmit+0x720/0xfe0
<...>
[   82.633431]  packet_sendmsg+0x96a/0x1cb0
[   82.636568]  sock_sendmsg+0x30/0x40

<...>

The following sequence of events caused the BUG:

1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG.

As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen.

Reproducer:

OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o

ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24

ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96
ip link set dev veth1 up

  ip netns exec at_ns0 \
  	ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
  	local ::11 remote ::22

ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up

ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24
ip link set dev ip6gretap11 up

tc qdisc add dev ip6gretap11 clsact
tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel

ping6 -c 3 -w 10 -q ::11

Fixes 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode")
---
 net/ipv6/ip6_gre.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
net/ipv6/ip6_gre.c +6 -3
index 288720838329..869c3337e319 100644
@@ -733,9 +733,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 	else
 		fl6->daddr = tunnel->parms.raddr;
 
-	if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
-		return -ENOMEM;
-
 	/* Push GRE header. */
 	protocol = (dev->type == ARPHRD_ETHER) ? htons(ETH_P_TEB) : proto;
 
@@ -763,6 +760,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 			(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
 		tun_hlen = gre_calc_hlen(flags);
 
+		if (skb_cow_head(skb, dev->needed_headroom ?: tun_hlen + tunnel->encap_hlen))
+			return -ENOMEM;
+
 		gre_build_header(skb, tun_hlen,
 				 flags, protocol,
 				 tunnel_id_to_key32(tun_info->key.tun_id),
@@ -773,6 +773,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		if (tunnel->parms.o_flags & TUNNEL_SEQ)
 			tunnel->o_seqno++;
 
+		if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
+			return -ENOMEM;
+
 		gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags,
 				 protocol, tunnel->parms.o_key,
 				 htonl(tunnel->o_seqno));
Signature · 1 line
2.35.1
author maintainer
#38 lore raw

PATCH 38/124 net: restore alpha order to Ethernet devices in config

In reply to Greg Kroah-Hartman

From: Stephen Hemminger <[email protected]>

[ Upstream commit da367ac74aecb59b62a9538009d4aee8ce4bdfb3 ]

The displayed list of Ethernet devices in make menuconfig has gotten out of order. This is mostly due to changes in vendor names etc, but also because of new Microsoft entry in wrong place.

This restores so that the display is in order even if the names of the sub directories are not.

Fixes ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
---
 drivers/net/ethernet/Kconfig | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/net/ethernet/Kconfig +13 -13
index 412ae3e43ffb..35ac6fe7529c 100644
@@ -34,15 +34,6 @@ source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/aquantia/Kconfig"
 source "drivers/net/ethernet/arc/Kconfig"
 source "drivers/net/ethernet/atheros/Kconfig"
-source "drivers/net/ethernet/broadcom/Kconfig"
-source "drivers/net/ethernet/brocade/Kconfig"
-source "drivers/net/ethernet/cadence/Kconfig"
-source "drivers/net/ethernet/calxeda/Kconfig"
-source "drivers/net/ethernet/cavium/Kconfig"
-source "drivers/net/ethernet/chelsio/Kconfig"
-source "drivers/net/ethernet/cirrus/Kconfig"
-source "drivers/net/ethernet/cisco/Kconfig"
-source "drivers/net/ethernet/cortina/Kconfig"
 
 config CX_ECAT
 	tristate "Beckhoff CX5020 EtherCAT master support"
@@ -56,6 +47,14 @@ config CX_ECAT
 	  To compile this driver as a module, choose M here. The module
 	  will be called ec_bhf.
 
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/cadence/Kconfig"
+source "drivers/net/ethernet/calxeda/Kconfig"
+source "drivers/net/ethernet/cavium/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
+source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/cortina/Kconfig"
 source "drivers/net/ethernet/davicom/Kconfig"
 
 config DNET
@@ -82,7 +81,6 @@ source "drivers/net/ethernet/huawei/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
-source "drivers/net/ethernet/microsoft/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
 
 config JME
@@ -125,8 +123,9 @@ source "drivers/net/ethernet/mediatek/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"
 source "drivers/net/ethernet/microchip/Kconfig"
-source "drivers/net/ethernet/moxa/Kconfig"
 source "drivers/net/ethernet/mscc/Kconfig"
+source "drivers/net/ethernet/microsoft/Kconfig"
+source "drivers/net/ethernet/moxa/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 
 config FEALNX
@@ -138,10 +137,10 @@ config FEALNX
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
 	  cards. <http://www.myson.com.tw/>
 
+source "drivers/net/ethernet/ni/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/netronome/Kconfig"
-source "drivers/net/ethernet/ni/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nvidia/Kconfig"
 source "drivers/net/ethernet/nxp/Kconfig"
@@ -161,6 +160,7 @@ source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/pensando/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/qualcomm/Kconfig"
 source "drivers/net/ethernet/rdc/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
@@ -168,10 +168,10 @@ source "drivers/net/ethernet/renesas/Kconfig"
 source "drivers/net/ethernet/rocker/Kconfig"
 source "drivers/net/ethernet/samsung/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
-source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/sgi/Kconfig"
 source "drivers/net/ethernet/silan/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
+source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/socionext/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
Signature · 1 line
2.35.1
author maintainer
#39 lore raw

PATCH 39/124 net/sched: cls_u32: fix possible leak in u32_init_knode()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit ec5b0f605b105457f257f2870acad4a5d463984b ]

While investigating a related syzbot report, I found that whenever call to tcf_exts_init() from u32_init_knode() is failing, we end up with an elevated refcount on ht->refcnt

To avoid that, only increase the refcount after all possible errors have been evaluated.

Fixes b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Cc Cong Wang <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/cls_u32.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/sched/cls_u32.c +4 -4
index 81f933ebee05..5d30db0d7157 100644
@@ -814,10 +814,6 @@ static struct tc_u_knode *u32_init_knode(struct net *net, struct tcf_proto *tp,
 	new->flags = n->flags;
 	RCU_INIT_POINTER(new->ht_down, ht);
 
-	/* bump reference count as long as we hold pointer to structure */
-	if (ht)
-		ht->refcnt++;
-
 #ifdef CONFIG_CLS_U32_PERF
 	/* Statistics may be incremented by readers during update
 	 * so we must keep them in tact. When the node is later destroyed
@@ -839,6 +835,10 @@ static struct tc_u_knode *u32_init_knode(struct net *net, struct tcf_proto *tp,
 		return NULL;
 	}
 
+	/* bump reference count as long as we hold pointer to structure */
+	if (ht)
+		ht->refcnt++;
+
 	return new;
 }
 
Signature · 1 line
2.35.1
author maintainer
#40 lore raw

PATCH 40/124 l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

[ Upstream commit 83daab06252ee5d0e1f4373ff28b79304945fc19 ]

Next patch uses l3mdev_master_upper_ifindex_by_index_rcu which throws a splat with debug kernels:

[13783.087570] ------------[ cut here ]------------
[13783.093974] RTNL: assertion failed at net/core/dev.c (6702)
[13783.100761] WARNING: CPU: 3 PID: 51132 at net/core/dev.c:6702 netdev_master_upper_dev_get+0x16a/0x1a0
[13783.184226] CPU: 3 PID: 51132 Comm: kworker/3:3 Not tainted 5.17.0-custom-100090-g6f963aafb1cc #682
[13783.194788] Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
[13783.204755] Workqueue: mld mld_ifc_work [ipv6]
[13783.210338] RIP: 0010:netdev_master_upper_dev_get+0x16a/0x1a0
[13783.217209] Code: 0f 85 e3 fe ff ff e8 65 ac ec fe ba 2e 1a 00 00 48 c7 c6 60 6f 38 83 48 c7 c7 c0 70 38 83 c6 05 5e b5 d7 01 01 e8 c6 29 52 00 <0f> 0b e9 b8 fe ff ff e8 5a 6c 35 ff e9 1c ff ff ff 48 89 ef e8 7d
[13783.238659] RSP: 0018:ffffc9000b37f5a8 EFLAGS: 00010286
[13783.244995] RAX: 0000000000000000 RBX: ffff88812ee5c000 RCX: 0000000000000000
[13783.253379] RDX: ffff88811ce09d40 RSI: ffffffff812d0fcd RDI: fffff5200166fea7
[13783.261769] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8882375f4287
[13783.270138] R10: ffffed1046ebe850 R11: 0000000000000001 R12: dffffc0000000000
[13783.278510] R13: 0000000000000275 R14: ffffc9000b37f688 R15: ffff8881273b4af8
[13783.286870] FS:  0000000000000000(0000) GS:ffff888237400000(0000) knlGS:0000000000000000
[13783.296352] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13783.303177] CR2: 00007ff25fc9b2e8 CR3: 0000000174d23000 CR4: 00000000001006e0
[13783.311546] Call Trace:
[13783.314660]  <TASK>
[13783.317553]  l3mdev_master_upper_ifindex_by_index_rcu+0x43/0xe0

...

Change l3mdev_master_upper_ifindex_by_index_rcu to use netdev_master_upper_dev_get_rcu.

Fixes 6a6d6681ac1a ("l3mdev: add function to retreive upper master")
Cc Alexis Bauvin <[email protected]>
---
 net/l3mdev/l3mdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/l3mdev/l3mdev.c +1 -1
index 17927966abb3..8b14a24f1040 100644
@@ -147,7 +147,7 @@ int l3mdev_master_upper_ifindex_by_index_rcu(struct net *net, int ifindex)
 
 	dev = dev_get_by_index_rcu(net, ifindex);
 	while (dev && !netif_is_l3_master(dev))
-		dev = netdev_master_upper_dev_get(dev);
+		dev = netdev_master_upper_dev_get_rcu(dev);
 
 	return dev ? dev->ifindex : 0;
 }
Signature · 1 line
2.35.1
author maintainer
#41 lore raw

PATCH 41/124 ipv6: make ip6_rt_gc_expire an atomic_t

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 9cb7c013420f98fa6fd12fc6a5dc055170c108db ]

Reads and Writes to ip6_rt_gc_expire always have been racy, as syzbot reported lately [1]

There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.

Hosts hitting ip6_dst_gc() very hard are under pretty bad state anyway.

[1]

BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc

read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:

 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:

 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

value changed: 0x00000bb3 -> 0x00000ba9

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
---
 include/net/netns/ipv6.h |  4 ++--
 net/ipv6/route.c         | 11 ++++++-----
 2 files changed, 8 insertions(+), 7 deletions(-)
include/net/netns/ipv6.h +2 -2
index 6bd7e5a85ce7..ff82983b7ab4 100644
@@ -75,8 +75,8 @@ struct netns_ipv6 {
 	struct list_head	fib6_walkers;
 	rwlock_t		fib6_walker_lock;
 	spinlock_t		fib6_gc_lock;
-	unsigned int		 ip6_rt_gc_expire;
-	unsigned long		 ip6_rt_last_gc;
+	atomic_t		ip6_rt_gc_expire;
+	unsigned long		ip6_rt_last_gc;
 	unsigned char		flowlabel_has_excl;
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 	bool			fib6_has_custom_rules;
net/ipv6/route.c +6 -5
index 6b269595efaa..0ca7c780d97a 100644
@@ -3303,6 +3303,7 @@ static int ip6_dst_gc(struct dst_ops *ops)
 	int rt_elasticity = net->ipv6.sysctl.ip6_rt_gc_elasticity;
 	int rt_gc_timeout = net->ipv6.sysctl.ip6_rt_gc_timeout;
 	unsigned long rt_last_gc = net->ipv6.ip6_rt_last_gc;
+	unsigned int val;
 	int entries;
 
 	entries = dst_entries_get_fast(ops);
@@ -3313,13 +3314,13 @@ static int ip6_dst_gc(struct dst_ops *ops)
 	    entries <= rt_max_size)
 		goto out;
 
-	net->ipv6.ip6_rt_gc_expire++;
-	fib6_run_gc(net->ipv6.ip6_rt_gc_expire, net, true);
+	fib6_run_gc(atomic_inc_return(&net->ipv6.ip6_rt_gc_expire), net, true);
 	entries = dst_entries_get_slow(ops);
 	if (entries < ops->gc_thresh)
-		net->ipv6.ip6_rt_gc_expire = rt_gc_timeout>>1;
+		atomic_set(&net->ipv6.ip6_rt_gc_expire, rt_gc_timeout >> 1);
 out:
-	net->ipv6.ip6_rt_gc_expire -= net->ipv6.ip6_rt_gc_expire>>rt_elasticity;
+	val = atomic_read(&net->ipv6.ip6_rt_gc_expire);
+	atomic_set(&net->ipv6.ip6_rt_gc_expire, val - (val >> rt_elasticity));
 	return entries > rt_max_size;
 }
 
@@ -6528,7 +6529,7 @@ static int __net_init ip6_route_net_init(struct net *net)
 	net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
 	net->ipv6.sysctl.skip_notify_on_dev_down = 0;
 
-	net->ipv6.ip6_rt_gc_expire = 30*HZ;
+	atomic_set(&net->ipv6.ip6_rt_gc_expire, 30*HZ);
 
 	ret = 0;
 out:
Signature · 1 line
2.35.1
author maintainer
#42 lore raw

PATCH 42/124 can: isotp: stop timeout monitoring when no first frame was sent

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit d73497081710c876c3c61444445512989e102152 ]

The first attempt to fix a the 'impossible' WARN_ON_ONCE(1) in isotp_tx_timer_handler() focussed on the identical CAN IDs created by the syzbot reproducer and lead to upstream fix/commit 3ea566422cbd ("can: isotp: sanitize CAN ID checks in isotp_bind()"). But this did not catch the root cause of the wrong tx.state in the tx_timer handler.

In the isotp 'first frame' case a timeout monitoring needs to be started before the 'first frame' is send. But when this sending failed the timeout monitoring for this specific frame has to be disabled too.

Otherwise the tx_timer is fired with the 'warn me' tx.state of ISOTP_IDLE.

Fixes e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Reported-by [email protected]
---
 net/can/isotp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
net/can/isotp.c +9 -1
index 5bce7c66c121..8c753dcefe7f 100644
@@ -866,6 +866,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 	struct canfd_frame *cf;
 	int ae = (so->opt.flags & CAN_ISOTP_EXTEND_ADDR) ? 1 : 0;
 	int wait_tx_done = (so->opt.flags & CAN_ISOTP_WAIT_TX_DONE) ? 1 : 0;
+	s64 hrtimer_sec = 0;
 	int off;
 	int err;
 
@@ -964,7 +965,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 		isotp_create_fframe(cf, so, ae);
 
 		/* start timeout for FC */
-		hrtimer_start(&so->txtimer, ktime_set(1, 0), HRTIMER_MODE_REL_SOFT);
+		hrtimer_sec = 1;
+		hrtimer_start(&so->txtimer, ktime_set(hrtimer_sec, 0),
+			      HRTIMER_MODE_REL_SOFT);
 	}
 
 	/* send the first or only CAN frame */
@@ -977,6 +980,11 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 	if (err) {
 		pr_notice_once("can-isotp: %s: can_send_ret %pe\n",
 			       __func__, ERR_PTR(err));
+
+		/* no transmission -> no timeout monitoring */
+		if (hrtimer_sec)
+			hrtimer_cancel(&so->txtimer);
+
 		goto err_out_drop;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#43 lore raw

PATCH 43/124 net: dsa: hellcreek: Calculate checksums in tagger

In reply to Greg Kroah-Hartman

From: Kurt Kanzenbach <[email protected]>

[ Upstream commit 0763120b090418a5257402754e22a34227ae5f12 ]

In case the checksum calculation is offloaded to the DSA master network interface, it will include the switch trailing tag. As soon as the switch strips that tag on egress, the calculated checksum is wrong.

Therefore, add the checksum calculation to the tagger (if required) before adding the switch tag. This way, the hellcreek code works with all DSA master interfaces regardless of their declared feature set.

Fixes 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
---
 net/dsa/tag_hellcreek.c | 8 ++++++++
 1 file changed, 8 insertions(+)
net/dsa/tag_hellcreek.c +8 -0
index f64b805303cd..eb204ad36eee 100644
@@ -21,6 +21,14 @@ static struct sk_buff *hellcreek_xmit(struct sk_buff *skb,
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	u8 *tag;
 
+	/* Calculate checksums (if required) before adding the trailer tag to
+	 * avoid including it in calculations. That would lead to wrong
+	 * checksums after the switch strips the tag.
+	 */
+	if (skb->ip_summed == CHECKSUM_PARTIAL &&
+	    skb_checksum_help(skb))
+		return NULL;
+
 	/* Tag encoding */
 	tag  = skb_put(skb, HELLCREEK_TAG_LEN);
 	*tag = BIT(dp->index);
Signature · 1 line
2.35.1
author maintainer
#44 lore raw

PATCH 44/124 net: mscc: ocelot: fix broken IP multicast flooding

In reply to Greg Kroah-Hartman

From: Vladimir Oltean <[email protected]>

[ Upstream commit 4cf35a2b627a020fe1a6b6fc7a6a12394644e474 ]

When the user runs:
bridge link set dev $br_port mcast_flood on

this command should affect not only L2 multicast, but also IPv4 and IPv6 multicast.

In the Ocelot switch, unknown multicast gets flooded according to different PGIDs according to its type, and PGID_MC only handles L2 multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their default value of 0, unknown IP multicast traffic is never flooded.

Fixes 421741ea5672 ("net: mscc: ocelot: offload bridge port flags to device")
---
 drivers/net/ethernet/mscc/ocelot.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/mscc/ocelot.c +2 -0
index 6aad0953e8fe..a59300d9e000 100644
@@ -1932,6 +1932,8 @@ static void ocelot_port_set_mcast_flood(struct ocelot *ocelot, int port,
 		val = BIT(port);
 
 	ocelot_rmw_rix(ocelot, val, BIT(port), ANA_PGID_PGID, PGID_MC);
+	ocelot_rmw_rix(ocelot, val, BIT(port), ANA_PGID_PGID, PGID_MCIPV4);
+	ocelot_rmw_rix(ocelot, val, BIT(port), ANA_PGID_PGID, PGID_MCIPV6);
 }
 
 static void ocelot_port_set_bcast_flood(struct ocelot *ocelot, int port,
Signature · 1 line
2.35.1
author maintainer
#45 lore raw

PATCH 45/124 netlink: reset network and mac headers in netlink_dump()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 99c07327ae11e24886d552dddbe4537bfca2765d ]

netlink_dump() is allocating an skb, reserves space in it but forgets to reset network header.

This allows a BPF program, invoked later from sk_filter() to access uninitialized kernel memory from the reserved space.

Theorically mac header reset could be omitted, because
it is set to a special initial value. bpf_internal_load_pointer_neg_helper calls skb_mac_header() without checking skb_mac_header_was_set().
Relying on skb->len not being too big seems fragile.
We also could add a sanity check in bpf_internal_load_pointer_neg_helper() to avoid surprises in the future.

syzbot report was:

BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was stored to memory at:

 ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:

 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3244 [inline]
 __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC")
Fixes 9063e21fb026 ("netlink: autosize skb lengthes")
---
 net/netlink/af_netlink.c | 7 +++++++
 1 file changed, 7 insertions(+)
net/netlink/af_netlink.c +7 -0
index 83ca93b32f5f..fb7f7b17c78c 100644
@@ -2284,6 +2284,13 @@ static int netlink_dump(struct sock *sk)
 	 * single netdev. The outcome is MSG_TRUNC error.
 	 */
 	skb_reserve(skb, skb_tailroom(skb) - alloc_size);
+
+	/* Make sure malicious BPF programs can not read unitialized memory
+	 * from skb->head -> skb->data
+	 */
+	skb_reset_network_header(skb);
+	skb_reset_mac_header(skb);
+
 	netlink_skb_set_owner_r(skb, sk);
 
 	if (nlk->dump_done_errno > 0) {
Signature · 1 line
2.35.1
author maintainer
#46 lore raw

PATCH 46/124 drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails

In reply to Greg Kroah-Hartman

From: José Roberto de Souza <[email protected]>

[ Upstream commit bb02330408a7bde33b5f46aa14fd5d7bfe6093b7 ]

If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid() fails, enable_psr2_sel_fetch will be kept enabled causing problems in the functions that only checks for it and not for has_psr2.

So here moving the check that do not depend on enable_psr2_sel_fetch and for the remaning ones jumping to a section that unset enable_psr2_sel_fetch in case of failure to support PSR2.

Fixes 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch")
Cc Jouni Högander <[email protected]>
(cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea)
---
 drivers/gpu/drm/i915/display/intel_psr.c | 38 +++++++++++++-----------
 1 file changed, 21 insertions(+), 17 deletions(-)
drivers/gpu/drm/i915/display/intel_psr.c +21 -17
index 1b0daf649e82..a3d0c57ec0f0 100644
@@ -936,6 +936,20 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 		return false;
 	}
 
+	/* Wa_16011303918:adl-p */
+	if (crtc_state->vrr.enable &&
+	    IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "PSR2 not enabled, not compatible with HW stepping + VRR\n");
+		return false;
+	}
+
+	if (!_compute_psr2_sdp_prior_scanline_indication(intel_dp, crtc_state)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "PSR2 not enabled, PSR2 SDP indication do not fit in hblank\n");
+		return false;
+	}
+
 	if (HAS_PSR2_SEL_FETCH(dev_priv)) {
 		if (!intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state) &&
 		    !HAS_PSR_HW_TRACKING(dev_priv)) {
@@ -949,12 +963,12 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	if (!crtc_state->enable_psr2_sel_fetch &&
 	    IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_C0)) {
 		drm_dbg_kms(&dev_priv->drm, "PSR2 HW tracking is not supported this Display stepping\n");
-		return false;
+		goto unsupported;
 	}
 
 	if (!psr2_granularity_check(intel_dp, crtc_state)) {
 		drm_dbg_kms(&dev_priv->drm, "PSR2 not enabled, SU granularity not compatible\n");
-		return false;
+		goto unsupported;
 	}
 
 	if (!crtc_state->enable_psr2_sel_fetch &&
@@ -963,25 +977,15 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 			    "PSR2 not enabled, resolution %dx%d > max supported %dx%d\n",
 			    crtc_hdisplay, crtc_vdisplay,
 			    psr_max_h, psr_max_v);
-		return false;
-	}
-
-	if (!_compute_psr2_sdp_prior_scanline_indication(intel_dp, crtc_state)) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "PSR2 not enabled, PSR2 SDP indication do not fit in hblank\n");
-		return false;
-	}
-
-	/* Wa_16011303918:adl-p */
-	if (crtc_state->vrr.enable &&
-	    IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "PSR2 not enabled, not compatible with HW stepping + VRR\n");
-		return false;
+		goto unsupported;
 	}
 
 	tgl_dc3co_exitline_compute_config(intel_dp, crtc_state);
 	return true;
+
+unsupported:
+	crtc_state->enable_psr2_sel_fetch = false;
+	return false;
 }
 
 void intel_psr_compute_config(struct intel_dp *intel_dp,
Signature · 1 line
2.35.1
author maintainer
#47 lore raw

PATCH 47/124 net: stmmac: Use readl_poll_timeout_atomic() in atomic state

In reply to Greg Kroah-Hartman

From: Kevin Hao <[email protected]>

[ Upstream commit 234901de2bc6847eaa0aeb4aba62c31ffb8d3ad6 ]

The init_systime() may be invoked in atomic state. We have observed the following call trace when running "phc_ctl /dev/ptp0 set" on a Intel Agilex board.

  BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  Preemption disabled at:
  [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
  CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
  Hardware name: SoCFPGA Agilex SoCDK (DT)
  Call trace:
   dump_backtrace.part.0+0xc4/0xd0
   show_stack+0x24/0x40
   dump_stack_lvl+0x7c/0xa0
   dump_stack+0x18/0x34
   __might_resched+0x154/0x1c0
   __might_sleep+0x58/0x90
   init_systime+0x78/0x120
   stmmac_set_time+0x64/0x8c
   ptp_clock_settime+0x60/0x9c
   pc_clock_settime+0x6c/0xc0
   __arm64_sys_clock_settime+0x88/0xf0
   invoke_syscall+0x5c/0x130
   el0_svc_common.constprop.0+0x4c/0x100
   do_el0_svc+0x7c/0xa0
   el0_svc+0x58/0xcc
   el0t_64_sync_handler+0xa4/0x130
   el0t_64_sync+0x18c/0x190

So we should use readl_poll_timeout_atomic() here instead of readl_poll_timeout().

Also adjust the delay time to 10us to fix a "__bad_udelay" build error reported by "kernel test robot <[email protected]>". I have tested this on Intel Agilex and NXP S32G boards, there is no delay needed at all. So the 10us delay should be long enough for most cases.

Fixes ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +2 -2
index a7ec9f4d46ce..d68ef72dcdde 100644
@@ -71,9 +71,9 @@ static int init_systime(void __iomem *ioaddr, u32 sec, u32 nsec)
 	writel(value, ioaddr + PTP_TCR);
 
 	/* wait for present system time initialize to complete */
-	return readl_poll_timeout(ioaddr + PTP_TCR, value,
+	return readl_poll_timeout_atomic(ioaddr + PTP_TCR, value,
 				 !(value & PTP_TCR_TSINIT),
-				 10000, 100000);
+				 10, 100000);
 }
 
 static int config_addend(void __iomem *ioaddr, u32 addend)
Signature · 1 line
2.35.1
author maintainer
#48 lore raw

PATCH 48/124 dmaengine: idxd: add RO check for wq max_batch_size write

In reply to Greg Kroah-Hartman

From: Dave Jiang <[email protected]>

[ Upstream commit 66903461ffed0b66fc3e0200082d4e09365aacdc ]

Block wq_max_batch_size_store() when the device is configured as read-only and not configurable.

---
 drivers/dma/idxd/sysfs.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/dma/idxd/sysfs.c +3 -0
index 999ce13a93ad..f7ab5c077a2b 100644
@@ -876,6 +876,9 @@ static ssize_t wq_max_batch_size_store(struct device *dev, struct device_attribu
 	u64 batch_size;
 	int rc;
 
+	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		return -EPERM;
+
 	if (wq->state != IDXD_WQ_DISABLED)
 		return -EPERM;
 
Signature · 1 line
2.35.1
author maintainer
#49 lore raw

PATCH 49/124 dmaengine: idxd: add RO check for wq max_transfer_size write

In reply to Greg Kroah-Hartman

From: Dave Jiang <[email protected]>

[ Upstream commit 505a2d1032ae656b0a8c736be110255503941cde ]

Block wq_max_transfer_size_store() when the device is configured as read-only and not configurable.

---
 drivers/dma/idxd/sysfs.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/dma/idxd/sysfs.c +3 -0
index f7ab5c077a2b..33d94c67fedb 100644
@@ -842,6 +842,9 @@ static ssize_t wq_max_transfer_size_store(struct device *dev, struct device_attr
 	u64 xfer_size;
 	int rc;
 
+	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		return -EPERM;
+
 	if (wq->state != IDXD_WQ_DISABLED)
 		return -EPERM;
 
Signature · 1 line
2.35.1
author maintainer
#50 lore raw

PATCH 50/124 dmaengine: idxd: skip clearing device context when device is read-only

In reply to Greg Kroah-Hartman

From: Dave Jiang <[email protected]>

[ Upstream commit 1cd8e751d96c43ece3f6842ac2244a37d9332c3a ]

If the device shows up as read-only configuration, skip the clearing of the state as the context must be preserved for device re-enable after being disabled.

---
 drivers/dma/idxd/device.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/dma/idxd/device.c +3 -0
index a67bafc596b7..e622245c9380 100644
@@ -730,6 +730,9 @@ static void idxd_device_wqs_clear_state(struct idxd_device *idxd)
 
 void idxd_device_clear_state(struct idxd_device *idxd)
 {
+	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		return;
+
 	idxd_groups_clear_state(idxd);
 	idxd_engines_clear_state(idxd);
 	idxd_device_wqs_clear_state(idxd);
Signature · 1 line
2.35.1
author maintainer
#51 lore raw

PATCH 51/124 selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

In reply to Greg Kroah-Hartman

From: Ido Schimmel <[email protected]>

[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ]

The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count.

Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw.

Fixes 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
---
 .../drivers/net/mlxsw/vxlan_flooding.sh         | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh +17 -0
index fedcb7b35af9..af5ea50ed5c0 100755
@@ -172,6 +172,17 @@ flooding_filters_add()
 	local lsb
 	local i
 
+	# Prevent unwanted packets from entering the bridge and interfering
+	# with the test.
+	tc qdisc add dev br0 clsact
+	tc filter add dev br0 egress protocol all pref 1 handle 1 \
+		matchall skip_hw action drop
+	tc qdisc add dev $h1 clsact
+	tc filter add dev $h1 egress protocol all pref 1 handle 1 \
+		flower skip_hw dst_mac de:ad:be:ef:13:37 action pass
+	tc filter add dev $h1 egress protocol all pref 2 handle 2 \
+		matchall skip_hw action drop
+
 	tc qdisc add dev $rp2 clsact
 
 	for i in $(eval echo {1..$num_remotes}); do
@@ -194,6 +205,12 @@ flooding_filters_del()
 	done
 
 	tc qdisc del dev $rp2 clsact
+
+	tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall
+	tc filter del dev $h1 egress protocol all pref 1 handle 1 flower
+	tc qdisc del dev $h1 clsact
+	tc filter del dev br0 egress protocol all pref 1 handle 1 matchall
+	tc qdisc del dev br0 clsact
 }
 
 flooding_check_packets()
Signature · 1 line
2.35.1
author maintainer
#52 lore raw

PATCH 52/124 arm64: mm: fix p?d_leaf()

In reply to Greg Kroah-Hartman

From: Muchun Song <[email protected]>

[ Upstream commit 23bc8f69f0eceecbb87c3801d2e48827d2dca92b ]

The pmd_leaf() is used to test a leaf mapped PMD, however, it misses the PROT_NONE mapped PMD on arm64. Fix it. A real world issue [1] caused by this was reported by Qian Cai. Also fix pud_leaf().

---
 arch/arm64/include/asm/pgtable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/include/asm/pgtable.h +2 -2
index 08363d3cc1da..ed57717cd004 100644
@@ -535,7 +535,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				 PMD_TYPE_TABLE)
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 				 PMD_TYPE_SECT)
-#define pmd_leaf(pmd)		pmd_sect(pmd)
+#define pmd_leaf(pmd)		(pmd_present(pmd) && !pmd_table(pmd))
 #define pmd_bad(pmd)		(!pmd_table(pmd))
 
 #define pmd_leaf_size(pmd)	(pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)
@@ -625,7 +625,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define pud_none(pud)		(!pud_val(pud))
 #define pud_bad(pud)		(!pud_table(pud))
 #define pud_present(pud)	pte_present(pud_pte(pud))
-#define pud_leaf(pud)		pud_sect(pud)
+#define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
Signature · 1 line
2.35.1
author maintainer
#53 lore raw

PATCH 53/124 ARM: vexpress/spc: Avoid negative array index when !SMP

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit b3f1dd52c991d79118f35e6d1bf4d7cb09882e38 ]

When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes a couple negative array index accesses:

arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
583 | if (init_opp_table[cluster])

      |       ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  592 |    init_opp_table[cluster] = true;
      |    ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~

Skip this logic when built !SMP.

---
 arch/arm/mach-vexpress/spc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-vexpress/spc.c +1 -1
index 1da11bdb1dfb..1c6500c4e6a1 100644
@@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
Signature · 9 lines
2.35.1




_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#54 lore raw

PATCH 54/124 reset: renesas: Check return value of reset_control_deassert()

In reply to Greg Kroah-Hartman

From: Heiner Kallweit <[email protected]>

[ Upstream commit da18980a855edf44270f05455e0ec3f2472f64cc ]

Deasserting the reset is vital, therefore bail out in case of error.

---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/reset/reset-rzg2l-usbphy-ctrl.c +3 -1
index 1e8315038850..a8dde4606360 100644
@@ -121,7 +121,9 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(priv->rstc),
 				     "failed to get reset\n");
 
-	reset_control_deassert(priv->rstc);
+	error = reset_control_deassert(priv->rstc);
+	if (error)
+		return error;
 
 	priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
 	priv->rcdev.of_reset_n_cells = 1;
Signature · 1 line
2.35.1
author maintainer
#55 lore raw

PATCH 55/124 reset: tegra-bpmp: Restore Handle errors in BPMP response

In reply to Greg Kroah-Hartman

From: Sameer Pujar <[email protected]>

[ Upstream commit d1da1052ffad63aa5181b69f20a6952e31f339c2 ]

This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert Handle errors in BPMP response").

The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA:
hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP response") can be removed now.

---
 drivers/reset/tegra/reset-bpmp.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/reset/tegra/reset-bpmp.c +8 -1
index 24d3395964cc..4c5bba52b105 100644
@@ -20,6 +20,7 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
 	struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc);
 	struct mrq_reset_request request;
 	struct tegra_bpmp_message msg;
+	int err;
 
 	memset(&request, 0, sizeof(request));
 	request.cmd = command;
@@ -30,7 +31,13 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
 	msg.tx.data = &request;
 	msg.tx.size = sizeof(request);
 
-	return tegra_bpmp_transfer(bpmp, &msg);
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc,
Signature · 1 line
2.35.1
author maintainer
#56 lore raw

PATCH 56/124 platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

In reply to Greg Kroah-Hartman

From: Jiapeng Chong <[email protected]>

[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]

Eliminate the follow smatch warnings:

drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned 'value' is never less than zero.

---
 drivers/platform/x86/samsung-laptop.c | 2 --
 1 file changed, 2 deletions(-)
drivers/platform/x86/samsung-laptop.c +0 -2
index 7ee010aa740a..404bdb4cbfae 100644
@@ -1121,8 +1121,6 @@ static void kbd_led_set(struct led_classdev *led_cdev,
 
 	if (value > samsung->kbd_led.max_brightness)
 		value = samsung->kbd_led.max_brightness;
-	else if (value < 0)
-		value = 0;
 
 	samsung->kbd_led_wk = value;
 	queue_work(samsung->led_workqueue, &samsung->kbd_led_work);
Signature · 1 line
2.35.1
author maintainer
#57 lore raw

PATCH 57/124 ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

In reply to Greg Kroah-Hartman

From: Borislav Petkov <[email protected]>

[ Upstream commit 1ef8715975de8bd481abbd0839ed4f49d9e5b0ff ]

Fix:

sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’:
sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant

    case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
    ^~~~

See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only.

[ A slight correction with parentheses around the argument by tiwai ]

---
 sound/usb/usbaudio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/usb/usbaudio.h +1 -1
index 167834133b9b..b8359a0aa008 100644
@@ -8,7 +8,7 @@
  */
 
 /* handling of USB vendor/product ID pairs as 32-bit numbers */
-#define USB_ID(vendor, product) (((vendor) << 16) | (product))
+#define USB_ID(vendor, product) (((unsigned int)(vendor) << 16) | (product))
 #define USB_ID_VENDOR(id) ((id) >> 16)
 #define USB_ID_PRODUCT(id) ((u16)(id))
 
Signature · 1 line
2.35.1
author maintainer
#58 lore raw

PATCH 58/124 drm/msm/disp: check the return value of kzalloc()

In reply to Greg Kroah-Hartman

From: Xiaoke Wang <[email protected]>

[ Upstream commit f75e582b0c3ee8f0bddc2248cc8b9175f29c5937 ]

kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access.

---
 drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c +2 -0
index cabe15190ec1..369e57f73a47 100644
@@ -169,6 +169,8 @@ void msm_disp_snapshot_add_block(struct msm_disp_state *disp_state, u32 len,
 	va_list va;
 
 	new_blk = kzalloc(sizeof(struct msm_disp_state_block), GFP_KERNEL);
+	if (!new_blk)
+		return;
 
 	va_start(va, fmt);
 
Signature · 1 line
2.35.1
author maintainer
#59 lore raw

PATCH 59/124 arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes

In reply to Greg Kroah-Hartman

From: Rob Herring <[email protected]>

[ Upstream commit 1bc12d301594eafde0a8529d28d459af81053b3a ]

The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them.

---
 arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 8 ++++----
 arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +4 -4
index 1dc9d187601c..a0bd540f27d3 100644
@@ -89,12 +89,12 @@
 		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <125>;
-		touchscreen-size-x = /bits/ 16 <4008>;
+		touchscreen-size-x = <4008>;
 		ti,y-min = /bits/ 16 <282>;
-		touchscreen-size-y = /bits/ 16 <3864>;
+		touchscreen-size-y = <3864>;
 		ti,x-plate-ohms = /bits/ 16 <180>;
-		touchscreen-max-pressure = /bits/ 16 <255>;
-		touchscreen-average-samples = /bits/ 16 <10>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
 		ti,debounce-tol = /bits/ 16 <3>;
 		ti,debounce-rep = /bits/ 16 <1>;
 		ti,settle-delay-usec = /bits/ 16 <150>;
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +4 -4
index b16c7caf34c1..87b5e23c766f 100644
@@ -70,12 +70,12 @@
 		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <125>;
-		touchscreen-size-x = /bits/ 16 <4008>;
+		touchscreen-size-x = <4008>;
 		ti,y-min = /bits/ 16 <282>;
-		touchscreen-size-y = /bits/ 16 <3864>;
+		touchscreen-size-y = <3864>;
 		ti,x-plate-ohms = /bits/ 16 <180>;
-		touchscreen-max-pressure = /bits/ 16 <255>;
-		touchscreen-average-samples = /bits/ 16 <10>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
 		ti,debounce-tol = /bits/ 16 <3>;
 		ti,debounce-rep = /bits/ 16 <1>;
 		ti,settle-delay-usec = /bits/ 16 <150>;
Signature · 1 line
2.35.1
author maintainer
#60 lore raw

PATCH 60/124 vxlan: fix error return code in vxlan_fdb_append

In reply to Greg Kroah-Hartman

From: Hongbin Wang <[email protected]>

[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ]

When kmalloc and dst_cache_init failed, should return ENOMEM rather than ENOBUFS.

---
 drivers/net/vxlan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/vxlan.c +2 -2
index 141635a35c28..129e270e9a7c 100644
@@ -711,11 +711,11 @@ static int vxlan_fdb_append(struct vxlan_fdb *f,
 
 	rd = kmalloc(sizeof(*rd), GFP_ATOMIC);
 	if (rd == NULL)
-		return -ENOBUFS;
+		return -ENOMEM;
 
 	if (dst_cache_init(&rd->dst_cache, GFP_ATOMIC)) {
 		kfree(rd);
-		return -ENOBUFS;
+		return -ENOMEM;
 	}
 
 	rd->remote_ip = *ip;
Signature · 1 line
2.35.1
author maintainer
#61 lore raw

PATCH 61/124 cifs: Check the IOCB_DIRECT flag, not O_DIRECT

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 994fd530a512597ffcd713b0f6d5bc916c5698f0 ]

Use the IOCB_DIRECT indicator flag on the I/O context rather than checking to see if the file was opened O_DIRECT.

---
 fs/cifs/cifsfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/cifsfs.c +1 -1
index 29a019cf1d5f..8f8d281e3151 100644
@@ -936,7 +936,7 @@ cifs_loose_read_iter(struct kiocb *iocb, struct iov_iter *iter)
 	ssize_t rc;
 	struct inode *inode = file_inode(iocb->ki_filp);
 
-	if (iocb->ki_filp->f_flags & O_DIRECT)
+	if (iocb->ki_flags & IOCB_DIRECT)
 		return cifs_user_readv(iocb, iter);
 
 	rc = cifs_revalidate_mapping(inode);
Signature · 1 line
2.35.1
author maintainer
#62 lore raw

PATCH 62/124 net: atlantic: Avoid out-of-bounds indexing

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 8d3a6c37d50d5a0504c126c932cc749e6dd9c78f ]

UBSAN warnings are observed on atlantic driver:

[ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48
[ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]'

The ring is dereferenced right before breaking out the loop, to prevent that from happening, only use the index in the loop to fix the issue.

---
 .../net/ethernet/aquantia/atlantic/aq_nic.c   |  8 +++----
 .../net/ethernet/aquantia/atlantic/aq_vec.c   | 24 +++++++++----------
 2 files changed, 16 insertions(+), 16 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_nic.c +4 -4
index 9de0065f89b9..fbb1e05d5878 100644
@@ -480,8 +480,8 @@ int aq_nic_start(struct aq_nic_s *self)
 	if (err < 0)
 		goto err_exit;
 
-	for (i = 0U, aq_vec = self->aq_vec[0];
-		self->aq_vecs > i; ++i, aq_vec = self->aq_vec[i]) {
+	for (i = 0U; self->aq_vecs > i; ++i) {
+		aq_vec = self->aq_vec[i];
 		err = aq_vec_start(aq_vec);
 		if (err < 0)
 			goto err_exit;
@@ -511,8 +511,8 @@ int aq_nic_start(struct aq_nic_s *self)
 		mod_timer(&self->polling_timer, jiffies +
 			  AQ_CFG_POLLING_TIMER_INTERVAL);
 	} else {
-		for (i = 0U, aq_vec = self->aq_vec[0];
-			self->aq_vecs > i; ++i, aq_vec = self->aq_vec[i]) {
+		for (i = 0U; self->aq_vecs > i; ++i) {
+			aq_vec = self->aq_vec[i];
 			err = aq_pci_func_alloc_irq(self, i, self->ndev->name,
 						    aq_vec_isr, aq_vec,
 						    aq_vec_get_affinity_mask(aq_vec));
drivers/net/ethernet/aquantia/atlantic/aq_vec.c +12 -12
index f4774cf051c9..6ab1f3212d24 100644
@@ -43,8 +43,8 @@ static int aq_vec_poll(struct napi_struct *napi, int budget)
 	if (!self) {
 		err = -EINVAL;
 	} else {
-		for (i = 0U, ring = self->ring[0];
-			self->tx_rings > i; ++i, ring = self->ring[i]) {
+		for (i = 0U; self->tx_rings > i; ++i) {
+			ring = self->ring[i];
 			u64_stats_update_begin(&ring[AQ_VEC_RX_ID].stats.rx.syncp);
 			ring[AQ_VEC_RX_ID].stats.rx.polls++;
 			u64_stats_update_end(&ring[AQ_VEC_RX_ID].stats.rx.syncp);
@@ -182,8 +182,8 @@ int aq_vec_init(struct aq_vec_s *self, const struct aq_hw_ops *aq_hw_ops,
 	self->aq_hw_ops = aq_hw_ops;
 	self->aq_hw = aq_hw;
 
-	for (i = 0U, ring = self->ring[0];
-		self->tx_rings > i; ++i, ring = self->ring[i]) {
+	for (i = 0U; self->tx_rings > i; ++i) {
+		ring = self->ring[i];
 		err = aq_ring_init(&ring[AQ_VEC_TX_ID], ATL_RING_TX);
 		if (err < 0)
 			goto err_exit;
@@ -224,8 +224,8 @@ int aq_vec_start(struct aq_vec_s *self)
 	unsigned int i = 0U;
 	int err = 0;
 
-	for (i = 0U, ring = self->ring[0];
-		self->tx_rings > i; ++i, ring = self->ring[i]) {
+	for (i = 0U; self->tx_rings > i; ++i) {
+		ring = self->ring[i];
 		err = self->aq_hw_ops->hw_ring_tx_start(self->aq_hw,
 							&ring[AQ_VEC_TX_ID]);
 		if (err < 0)
@@ -248,8 +248,8 @@ void aq_vec_stop(struct aq_vec_s *self)
 	struct aq_ring_s *ring = NULL;
 	unsigned int i = 0U;
 
-	for (i = 0U, ring = self->ring[0];
-		self->tx_rings > i; ++i, ring = self->ring[i]) {
+	for (i = 0U; self->tx_rings > i; ++i) {
+		ring = self->ring[i];
 		self->aq_hw_ops->hw_ring_tx_stop(self->aq_hw,
 						 &ring[AQ_VEC_TX_ID]);
 
@@ -268,8 +268,8 @@ void aq_vec_deinit(struct aq_vec_s *self)
 	if (!self)
 		goto err_exit;
 
-	for (i = 0U, ring = self->ring[0];
-		self->tx_rings > i; ++i, ring = self->ring[i]) {
+	for (i = 0U; self->tx_rings > i; ++i) {
+		ring = self->ring[i];
 		aq_ring_tx_clean(&ring[AQ_VEC_TX_ID]);
 		aq_ring_rx_deinit(&ring[AQ_VEC_RX_ID]);
 	}
@@ -297,8 +297,8 @@ void aq_vec_ring_free(struct aq_vec_s *self)
 	if (!self)
 		goto err_exit;
 
-	for (i = 0U, ring = self->ring[0];
-		self->tx_rings > i; ++i, ring = self->ring[i]) {
+	for (i = 0U; self->tx_rings > i; ++i) {
+		ring = self->ring[i];
 		aq_ring_free(&ring[AQ_VEC_TX_ID]);
 		if (i < self->rx_rings)
 			aq_ring_free(&ring[AQ_VEC_RX_ID]);
Signature · 1 line
2.35.1
author maintainer
#63 lore raw

PATCH 63/124 mt76: Fix undefined behavior due to shift overflowing the constant

In reply to Greg Kroah-Hartman

From: Borislav Petkov <[email protected]>

[ Upstream commit dbc2b1764734857d68425468ffa8486e97ab89df ]

Fix:

drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only.

---
 drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c +1 -1
index adf288e50e21..5cd0379d86de 100644
@@ -80,7 +80,7 @@ mt76x2e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	mt76_rmw_field(dev, 0x15a10, 0x1f << 16, 0x9);
 
 	/* RG_SSUSB_G1_CDR_BIC_LTR = 0xf */
-	mt76_rmw_field(dev, 0x15a0c, 0xf << 28, 0xf);
+	mt76_rmw_field(dev, 0x15a0c, 0xfU << 28, 0xf);
 
 	/* RG_SSUSB_CDR_BR_PE1D = 0x3 */
 	mt76_rmw_field(dev, 0x15c58, 0x3 << 6, 0x3);
Signature · 1 line
2.35.1
author maintainer
#64 lore raw

PATCH 64/124 brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

In reply to Greg Kroah-Hartman

From: Borislav Petkov <[email protected]>

[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ]

Fix:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant

    case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
    ^~~~
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
    ^~~~

See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +1 -1
index 5d156e591b35..f7961b22e051 100644
@@ -557,7 +557,7 @@ enum brcmf_sdio_frmtype {
 	BRCMF_SDIO_FT_SUB,
 };
 
-#define SDIOD_DRVSTR_KEY(chip, pmu)     (((chip) << 16) | (pmu))
+#define SDIOD_DRVSTR_KEY(chip, pmu)     (((unsigned int)(chip) << 16) | (pmu))
 
 /* SDIO Pad drive strength to select value mappings */
 struct sdiod_drive_str {
Signature · 1 line
2.35.1
author maintainer
#65 lore raw

PATCH 65/124 dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

In reply to Greg Kroah-Hartman

From: Lv Ruyi <[email protected]>

[ Upstream commit 1a7eb80d170c28be2928433702256fe2a0bd1e0f ]

Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done.

---
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c +6 -2
index 763d2c7b5fb1..5750f9a56393 100644
@@ -489,11 +489,15 @@ static int dpaa_get_ts_info(struct net_device *net_dev,
 	info->phc_index = -1;
 
 	fman_node = of_get_parent(mac_node);
-	if (fman_node)
+	if (fman_node) {
 		ptp_node = of_parse_phandle(fman_node, "ptimer-handle", 0);
+		of_node_put(fman_node);
+	}
 
-	if (ptp_node)
+	if (ptp_node) {
 		ptp_dev = of_find_device_by_node(ptp_node);
+		of_node_put(ptp_node);
+	}
 
 	if (ptp_dev)
 		ptp = platform_get_drvdata(ptp_dev);
Signature · 1 line
2.35.1
author maintainer
#66 lore raw

PATCH 66/124 drm/msm/mdp5: check the return of kzalloc()

In reply to Greg Kroah-Hartman

From: Xiaoke Wang <[email protected]>

[ Upstream commit 047ae665577776b7feb11bd4f81f46627cff95e7 ]

kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access.

Besides, since mdp5_plane_reset() is void type, so we should better set plane-state to NULL after releasing it.

Patchwork: https://patchwork.freedesktop.org/patch/481055/

---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c +3 -0
index c6b69afcbac8..50e854207c70 100644
@@ -90,7 +90,10 @@ static void mdp5_plane_reset(struct drm_plane *plane)
 		__drm_atomic_helper_plane_destroy_state(plane->state);
 
 	kfree(to_mdp5_plane_state(plane->state));
+	plane->state = NULL;
 	mdp5_state = kzalloc(sizeof(*mdp5_state), GFP_KERNEL);
+	if (!mdp5_state)
+		return;
 
 	if (plane->type == DRM_PLANE_TYPE_PRIMARY)
 		mdp5_state->base.zpos = STAGE_BASE;
Signature · 1 line
2.35.1
author maintainer
#67 lore raw

PATCH 67/124 net: macb: Restart tx only if queue pointer is lagging

In reply to Greg Kroah-Hartman

From: Tomas Melin <[email protected]>

[ Upstream commit 5ad7f18cd82cee8e773d40cc7a1465a526f2615c ]

commit 4298388574da ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of.

For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume.

This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall.

---
 drivers/net/ethernet/cadence/macb_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/net/ethernet/cadence/macb_main.c +8 -0
index 9705c49655ad..217c1a0f8940 100644
@@ -1689,6 +1689,7 @@ static void macb_tx_restart(struct macb_queue *queue)
 	unsigned int head = queue->tx_head;
 	unsigned int tail = queue->tx_tail;
 	struct macb *bp = queue->bp;
+	unsigned int head_idx, tbqp;
 
 	if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
 		queue_writel(queue, ISR, MACB_BIT(TXUBR));
@@ -1696,6 +1697,13 @@ static void macb_tx_restart(struct macb_queue *queue)
 	if (head == tail)
 		return;
 
+	tbqp = queue_readl(queue, TBQP) / macb_dma_desc_get_size(bp);
+	tbqp = macb_adj_dma_desc_idx(bp, macb_tx_ring_wrap(bp, tbqp));
+	head_idx = macb_adj_dma_desc_idx(bp, macb_tx_ring_wrap(bp, head));
+
+	if (tbqp == head_idx)
+		return;
+
 	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART));
 }
 
Signature · 1 line
2.35.1
author maintainer
#68 lore raw

PATCH 68/124 scsi: iscsi: Release endpoint ID when its freed

In reply to Greg Kroah-Hartman

From: Mike Christie <[email protected]>

[ Upstream commit 3c6ae371b8a1ffba1fc415989fd581ebf841ed0a ]

We can't release the endpoint ID until all references to the endpoint have been dropped or it could be allocated while in use. This has us use an idr instead of looping over all conns to find a free ID and then free the ID when all references have been dropped instead of when the device is only deleted.

---
 drivers/scsi/scsi_transport_iscsi.c | 71 ++++++++++++++---------------
 include/scsi/scsi_transport_iscsi.h |  2 +-
 2 files changed, 36 insertions(+), 37 deletions(-)
drivers/scsi/scsi_transport_iscsi.c +35 -36
index c7b1b2e8bb02..bcdfcb25349a 100644
@@ -86,6 +86,9 @@ struct iscsi_internal {
 	struct transport_container session_cont;
 };
 
+static DEFINE_IDR(iscsi_ep_idr);
+static DEFINE_MUTEX(iscsi_ep_idr_mutex);
+
 static atomic_t iscsi_session_nr; /* sysfs session id for next new session */
 static struct workqueue_struct *iscsi_eh_timer_workq;
 
@@ -169,6 +172,11 @@ struct device_attribute dev_attr_##_prefix##_##_name =	\
 static void iscsi_endpoint_release(struct device *dev)
 {
 	struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev);
+
+	mutex_lock(&iscsi_ep_idr_mutex);
+	idr_remove(&iscsi_ep_idr, ep->id);
+	mutex_unlock(&iscsi_ep_idr_mutex);
+
 	kfree(ep);
 }
 
@@ -181,7 +189,7 @@ static ssize_t
 show_ep_handle(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev);
-	return sysfs_emit(buf, "%llu\n", (unsigned long long) ep->id);
+	return sysfs_emit(buf, "%d\n", ep->id);
 }
 static ISCSI_ATTR(ep, handle, S_IRUGO, show_ep_handle, NULL);
 
@@ -194,48 +202,32 @@ static struct attribute_group iscsi_endpoint_group = {
 	.attrs = iscsi_endpoint_attrs,
 };
 
-#define ISCSI_MAX_EPID -1
-
-static int iscsi_match_epid(struct device *dev, const void *data)
-{
-	struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev);
-	const uint64_t *epid = data;
-
-	return *epid == ep->id;
-}
-
 struct iscsi_endpoint *
 iscsi_create_endpoint(int dd_size)
 {
-	struct device *dev;
 	struct iscsi_endpoint *ep;
-	uint64_t id;
-	int err;
-
-	for (id = 1; id < ISCSI_MAX_EPID; id++) {
-		dev = class_find_device(&iscsi_endpoint_class, NULL, &id,
-					iscsi_match_epid);
-		if (!dev)
-			break;
-		else
-			put_device(dev);
-	}
-	if (id == ISCSI_MAX_EPID) {
-		printk(KERN_ERR "Too many connections. Max supported %u\n",
-		       ISCSI_MAX_EPID - 1);
-		return NULL;
-	}
+	int err, id;
 
 	ep = kzalloc(sizeof(*ep) + dd_size, GFP_KERNEL);
 	if (!ep)
 		return NULL;
 
+	mutex_lock(&iscsi_ep_idr_mutex);
+	id = idr_alloc(&iscsi_ep_idr, ep, 0, -1, GFP_NOIO);
+	if (id < 0) {
+		mutex_unlock(&iscsi_ep_idr_mutex);
+		printk(KERN_ERR "Could not allocate endpoint ID. Error %d.\n",
+		       id);
+		goto free_ep;
+	}
+	mutex_unlock(&iscsi_ep_idr_mutex);
+
 	ep->id = id;
 	ep->dev.class = &iscsi_endpoint_class;
-	dev_set_name(&ep->dev, "ep-%llu", (unsigned long long) id);
+	dev_set_name(&ep->dev, "ep-%d", id);
 	err = device_register(&ep->dev);
         if (err)
-                goto free_ep;
+		goto free_id;
 
 	err = sysfs_create_group(&ep->dev.kobj, &iscsi_endpoint_group);
 	if (err)
@@ -249,6 +241,10 @@ iscsi_create_endpoint(int dd_size)
 	device_unregister(&ep->dev);
 	return NULL;
 
+free_id:
+	mutex_lock(&iscsi_ep_idr_mutex);
+	idr_remove(&iscsi_ep_idr, id);
+	mutex_unlock(&iscsi_ep_idr_mutex);
 free_ep:
 	kfree(ep);
 	return NULL;
@@ -276,14 +272,17 @@ EXPORT_SYMBOL_GPL(iscsi_put_endpoint);
  */
 struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle)
 {
-	struct device *dev;
+	struct iscsi_endpoint *ep;
 
-	dev = class_find_device(&iscsi_endpoint_class, NULL, &handle,
-				iscsi_match_epid);
-	if (!dev)
-		return NULL;
+	mutex_lock(&iscsi_ep_idr_mutex);
+	ep = idr_find(&iscsi_ep_idr, handle);
+	if (!ep)
+		goto unlock;
 
-	return iscsi_dev_to_endpoint(dev);
+	get_device(&ep->dev);
+unlock:
+	mutex_unlock(&iscsi_ep_idr_mutex);
+	return ep;
 }
 EXPORT_SYMBOL_GPL(iscsi_lookup_endpoint);
 
include/scsi/scsi_transport_iscsi.h +1 -1
index 037c77fb5dc5..3ecf9702287b 100644
@@ -296,7 +296,7 @@ extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
 struct iscsi_endpoint {
 	void *dd_data;			/* LLD private data */
 	struct device dev;
-	uint64_t id;
+	int id;
 	struct iscsi_cls_conn *conn;
 };
 
Signature · 1 line
2.35.1
author maintainer
#69 lore raw

PATCH 69/124 scsi: iscsi: Merge suspend fields

In reply to Greg Kroah-Hartman

From: Mike Christie <[email protected]>

[ Upstream commit 5bd856256f8c03e329f8ff36d8c8efcb111fe6df ]

Move the tx and rx suspend fields into one flags field.

---
 drivers/scsi/bnx2i/bnx2i_hwi.c   |  2 +-
 drivers/scsi/bnx2i/bnx2i_iscsi.c |  2 +-
 drivers/scsi/cxgbi/libcxgbi.c    |  6 +++---
 drivers/scsi/libiscsi.c          | 20 ++++++++++----------
 drivers/scsi/libiscsi_tcp.c      |  2 +-
 include/scsi/libiscsi.h          |  9 +++++----
 6 files changed, 21 insertions(+), 20 deletions(-)
drivers/scsi/bnx2i/bnx2i_hwi.c +1 -1
index 5521469ce678..e16327a4b4c9 100644
@@ -1977,7 +1977,7 @@ static int bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
 			break;
 
-		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx))) {
+		if (unlikely(test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) {
 			if (nopin->op_code == ISCSI_OP_NOOP_IN &&
 			    nopin->itt == (u16) RESERVED_ITT) {
 				printk(KERN_ALERT "bnx2i: Unsolicited "
drivers/scsi/bnx2i/bnx2i_iscsi.c +1 -1
index 1b5f3e143f07..2e5241d12dc3 100644
@@ -1721,7 +1721,7 @@ static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 			struct iscsi_conn *conn = ep->conn->cls_conn->dd_data;
 
 			/* Must suspend all rx queue activity for this ep */
-			set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+			set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
 		}
 		/* CONN_DISCONNECT timeout may or may not be an issue depending
 		 * on what transcribed in TCP layer, different targets behave
drivers/scsi/cxgbi/libcxgbi.c +3 -3
index 8c7d4dda4cf2..4365d52c6430 100644
@@ -1634,11 +1634,11 @@ void cxgbi_conn_pdu_ready(struct cxgbi_sock *csk)
 	log_debug(1 << CXGBI_DBG_PDU_RX,
 		"csk 0x%p, conn 0x%p.\n", csk, conn);
 
-	if (unlikely(!conn || conn->suspend_rx)) {
+	if (unlikely(!conn || test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) {
 		log_debug(1 << CXGBI_DBG_PDU_RX,
-			"csk 0x%p, conn 0x%p, id %d, suspend_rx %lu!\n",
+			"csk 0x%p, conn 0x%p, id %d, conn flags 0x%lx!\n",
 			csk, conn, conn ? conn->id : 0xFF,
-			conn ? conn->suspend_rx : 0xFF);
+			conn ? conn->flags : 0xFF);
 		return;
 	}
 
drivers/scsi/libiscsi.c +10 -10
index cbc263ec9d66..a4f26431b033 100644
@@ -1392,8 +1392,8 @@ static bool iscsi_set_conn_failed(struct iscsi_conn *conn)
 	if (conn->stop_stage == 0)
 		session->state = ISCSI_STATE_FAILED;
 
-	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+	set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
+	set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
 	return true;
 }
 
@@ -1454,7 +1454,7 @@ static int iscsi_xmit_task(struct iscsi_conn *conn, struct iscsi_task *task,
 	 * Do this after dropping the extra ref because if this was a requeue
 	 * it's removed from that list and cleanup_queued_task would miss it.
 	 */
-	if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) {
+	if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
 		/*
 		 * Save the task and ref in case we weren't cleaning up this
 		 * task and get woken up again.
@@ -1532,7 +1532,7 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
 	int rc = 0;
 
 	spin_lock_bh(&conn->session->frwd_lock);
-	if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) {
+	if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
 		ISCSI_DBG_SESSION(conn->session, "Tx suspended!\n");
 		spin_unlock_bh(&conn->session->frwd_lock);
 		return -ENODATA;
@@ -1746,7 +1746,7 @@ int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc)
 		goto fault;
 	}
 
-	if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) {
+	if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
 		reason = FAILURE_SESSION_IN_RECOVERY;
 		sc->result = DID_REQUEUE << 16;
 		goto fault;
@@ -1935,7 +1935,7 @@ static void fail_scsi_tasks(struct iscsi_conn *conn, u64 lun, int error)
 void iscsi_suspend_queue(struct iscsi_conn *conn)
 {
 	spin_lock_bh(&conn->session->frwd_lock);
-	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+	set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
 	spin_unlock_bh(&conn->session->frwd_lock);
 }
 EXPORT_SYMBOL_GPL(iscsi_suspend_queue);
@@ -1953,7 +1953,7 @@ void iscsi_suspend_tx(struct iscsi_conn *conn)
 	struct Scsi_Host *shost = conn->session->host;
 	struct iscsi_host *ihost = shost_priv(shost);
 
-	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+	set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
 	if (ihost->workq)
 		flush_workqueue(ihost->workq);
 }
@@ -1961,7 +1961,7 @@ EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
 
 static void iscsi_start_tx(struct iscsi_conn *conn)
 {
-	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+	clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
 	iscsi_conn_queue_work(conn);
 }
 
@@ -3324,8 +3324,8 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
 	/*
 	 * Unblock xmitworker(), Login Phase will pass through.
 	 */
-	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
-	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+	clear_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
+	clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_bind);
drivers/scsi/libiscsi_tcp.c +1 -1
index 2e9ffe3d1a55..883005757ddb 100644
@@ -927,7 +927,7 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb,
 	 */
 	conn->last_recv = jiffies;
 
-	if (unlikely(conn->suspend_rx)) {
+	if (unlikely(test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) {
 		ISCSI_DBG_TCP(conn, "Rx suspended!\n");
 		*status = ISCSI_TCP_SUSPENDED;
 		return 0;
include/scsi/libiscsi.h +5 -4
index 4ee233e5a6ff..bdb0ae11682d 100644
@@ -52,8 +52,10 @@ enum {
 
 #define ISID_SIZE			6
 
-/* Connection suspend "bit" */
-#define ISCSI_SUSPEND_BIT		1
+/* Connection flags */
+#define ISCSI_CONN_FLAG_SUSPEND_TX	BIT(0)
+#define ISCSI_CONN_FLAG_SUSPEND_RX	BIT(1)
+
 
 #define ISCSI_ITT_MASK			0x1fff
 #define ISCSI_TOTAL_CMDS_MAX		4096
@@ -199,8 +201,7 @@ struct iscsi_conn {
 	struct list_head	cmdqueue;	/* data-path cmd queue */
 	struct list_head	requeue;	/* tasks needing another run */
 	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
-	unsigned long		suspend_tx;	/* suspend Tx */
-	unsigned long		suspend_rx;	/* suspend Rx */
+	unsigned long		flags;		/* ISCSI_CONN_FLAGs */
 
 	/* negotiated params */
 	unsigned		max_recv_dlength; /* initiator_max_recv_dsl*/
Signature · 1 line
2.35.1
author maintainer
#70 lore raw

PATCH 70/124 scsi: iscsi: Fix NOP handling during conn recovery

In reply to Greg Kroah-Hartman

From: Mike Christie <[email protected]>

[ Upstream commit 44ac97109e42f87b1a34954704b81b6c8eca80c4 ]

If a offload driver doesn't use the xmit workqueue, then when we are doing ep_disconnect libiscsi can still inject PDUs to the driver. This adds a check for if the connection is bound before trying to inject PDUs.

---
 drivers/scsi/libiscsi.c | 7 ++++++-
 include/scsi/libiscsi.h | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)
drivers/scsi/libiscsi.c +6 -1
index a4f26431b033..0f2c7098f9d6 100644
@@ -678,7 +678,8 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	struct iscsi_task *task;
 	itt_t itt;
 
-	if (session->state == ISCSI_STATE_TERMINATE)
+	if (session->state == ISCSI_STATE_TERMINATE ||
+	    !test_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags))
 		return NULL;
 
 	if (opcode == ISCSI_OP_LOGIN || opcode == ISCSI_OP_TEXT) {
@@ -2214,6 +2215,8 @@ void iscsi_conn_unbind(struct iscsi_cls_conn *cls_conn, bool is_active)
 	iscsi_suspend_tx(conn);
 
 	spin_lock_bh(&session->frwd_lock);
+	clear_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags);
+
 	if (!is_active) {
 		/*
 		 * if logout timed out before userspace could even send a PDU
@@ -3312,6 +3315,8 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
 	spin_lock_bh(&session->frwd_lock);
 	if (is_leading)
 		session->leadconn = conn;
+
+	set_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags);
 	spin_unlock_bh(&session->frwd_lock);
 
 	/*
include/scsi/libiscsi.h +1 -1
index bdb0ae11682d..d1e282f0d6f1 100644
@@ -55,7 +55,7 @@ enum {
 /* Connection flags */
 #define ISCSI_CONN_FLAG_SUSPEND_TX	BIT(0)
 #define ISCSI_CONN_FLAG_SUSPEND_RX	BIT(1)
-
+#define ISCSI_CONN_FLAG_BOUND		BIT(2)
 
 #define ISCSI_ITT_MASK			0x1fff
 #define ISCSI_TOTAL_CMDS_MAX		4096
Signature · 1 line
2.35.1
author maintainer
#71 lore raw

PATCH 71/124 scsi: qedi: Fix failed disconnect handling

In reply to Greg Kroah-Hartman

From: Mike Christie <[email protected]>

[ Upstream commit 857b06527f707f5df634b854898a191b5c1d0272 ]

We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is created. Then in qedi_set_path we kick off the offload work. If userspace times out the connection and calls ep_disconnect, qedi will only flush the offload work if the qedi_ep state has transitioned away from EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned state and will leave the offload work running, and we will free the qedi_ep from under it.

This patch just has us init the work when we create the ep, then always flush it.

---
 drivers/scsi/qedi/qedi_iscsi.c | 69 +++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 35 deletions(-)
drivers/scsi/qedi/qedi_iscsi.c +34 -35
index c5260429c637..04b40a6c1aff 100644
@@ -859,6 +859,37 @@ static int qedi_task_xmit(struct iscsi_task *task)
 	return qedi_iscsi_send_ioreq(task);
 }
 
+static void qedi_offload_work(struct work_struct *work)
+{
+	struct qedi_endpoint *qedi_ep =
+		container_of(work, struct qedi_endpoint, offload_work);
+	struct qedi_ctx *qedi;
+	int wait_delay = 5 * HZ;
+	int ret;
+
+	qedi = qedi_ep->qedi;
+
+	ret = qedi_iscsi_offload_conn(qedi_ep);
+	if (ret) {
+		QEDI_ERR(&qedi->dbg_ctx,
+			 "offload error: iscsi_cid=%u, qedi_ep=%p, ret=%d\n",
+			 qedi_ep->iscsi_cid, qedi_ep, ret);
+		qedi_ep->state = EP_STATE_OFLDCONN_FAILED;
+		return;
+	}
+
+	ret = wait_event_interruptible_timeout(qedi_ep->tcp_ofld_wait,
+					       (qedi_ep->state ==
+					       EP_STATE_OFLDCONN_COMPL),
+					       wait_delay);
+	if (ret <= 0 || qedi_ep->state != EP_STATE_OFLDCONN_COMPL) {
+		qedi_ep->state = EP_STATE_OFLDCONN_FAILED;
+		QEDI_ERR(&qedi->dbg_ctx,
+			 "Offload conn TIMEOUT iscsi_cid=%u, qedi_ep=%p\n",
+			 qedi_ep->iscsi_cid, qedi_ep);
+	}
+}
+
 static struct iscsi_endpoint *
 qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 		int non_blocking)
@@ -907,6 +938,7 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 	}
 	qedi_ep = ep->dd_data;
 	memset(qedi_ep, 0, sizeof(struct qedi_endpoint));
+	INIT_WORK(&qedi_ep->offload_work, qedi_offload_work);
 	qedi_ep->state = EP_STATE_IDLE;
 	qedi_ep->iscsi_cid = (u32)-1;
 	qedi_ep->qedi = qedi;
@@ -1055,12 +1087,11 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 	qedi_ep = ep->dd_data;
 	qedi = qedi_ep->qedi;
 
+	flush_work(&qedi_ep->offload_work);
+
 	if (qedi_ep->state == EP_STATE_OFLDCONN_START)
 		goto ep_exit_recover;
 
-	if (qedi_ep->state != EP_STATE_OFLDCONN_NONE)
-		flush_work(&qedi_ep->offload_work);
-
 	if (qedi_ep->conn) {
 		qedi_conn = qedi_ep->conn;
 		abrt_conn = qedi_conn->abrt_conn;
@@ -1234,37 +1265,6 @@ static int qedi_data_avail(struct qedi_ctx *qedi, u16 vlanid)
 	return rc;
 }
 
-static void qedi_offload_work(struct work_struct *work)
-{
-	struct qedi_endpoint *qedi_ep =
-		container_of(work, struct qedi_endpoint, offload_work);
-	struct qedi_ctx *qedi;
-	int wait_delay = 5 * HZ;
-	int ret;
-
-	qedi = qedi_ep->qedi;
-
-	ret = qedi_iscsi_offload_conn(qedi_ep);
-	if (ret) {
-		QEDI_ERR(&qedi->dbg_ctx,
-			 "offload error: iscsi_cid=%u, qedi_ep=%p, ret=%d\n",
-			 qedi_ep->iscsi_cid, qedi_ep, ret);
-		qedi_ep->state = EP_STATE_OFLDCONN_FAILED;
-		return;
-	}
-
-	ret = wait_event_interruptible_timeout(qedi_ep->tcp_ofld_wait,
-					       (qedi_ep->state ==
-					       EP_STATE_OFLDCONN_COMPL),
-					       wait_delay);
-	if ((ret <= 0) || (qedi_ep->state != EP_STATE_OFLDCONN_COMPL)) {
-		qedi_ep->state = EP_STATE_OFLDCONN_FAILED;
-		QEDI_ERR(&qedi->dbg_ctx,
-			 "Offload conn TIMEOUT iscsi_cid=%u, qedi_ep=%p\n",
-			 qedi_ep->iscsi_cid, qedi_ep);
-	}
-}
-
 static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
 {
 	struct qedi_ctx *qedi;
@@ -1380,7 +1380,6 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
 			  qedi_ep->dst_addr, qedi_ep->dst_port);
 	}
 
-	INIT_WORK(&qedi_ep->offload_work, qedi_offload_work);
 	queue_work(qedi->offload_thread, &qedi_ep->offload_work);
 
 	ret = 0;
Signature · 1 line
2.35.1
author maintainer
#72 lore raw

PATCH 72/124 stat: fix inconsistency between struct stat and struct compat_stat

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

[ Upstream commit 932aba1e169090357a77af18850a10c256b50819 ]

struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding.

This patch fixes struct compat_stat to match struct stat.

[ Historical note: the old x86 'struct stat' did have that 16-bit field
that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t":

    https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d

and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ]

Note that we can't change compat_dev_t because it is used by compat_loop_info.

Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259.

Cc Andreas Schwab <[email protected]>
Cc Matthew Wilcox <[email protected]>
Cc Christoph Hellwig <[email protected]>
---
 arch/x86/include/asm/compat.h |  6 ++----
 fs/stat.c                     | 19 ++++++++++---------
 2 files changed, 12 insertions(+), 13 deletions(-)
arch/x86/include/asm/compat.h +2 -4
index 7516e4199b3c..20fd0acd7d80 100644
@@ -28,15 +28,13 @@ typedef u16		compat_ipc_pid_t;
 typedef __kernel_fsid_t	compat_fsid_t;
 
 struct compat_stat {
-	compat_dev_t	st_dev;
-	u16		__pad1;
+	u32		st_dev;
 	compat_ino_t	st_ino;
 	compat_mode_t	st_mode;
 	compat_nlink_t	st_nlink;
 	__compat_uid_t	st_uid;
 	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	u16		__pad2;
+	u32		st_rdev;
 	u32		st_size;
 	u32		st_blksize;
 	u32		st_blocks;
fs/stat.c +10 -9
index 28d2020ba1f4..246d138ec066 100644
@@ -334,9 +334,6 @@ SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, stat
 #  define choose_32_64(a,b) b
 #endif
 
-#define valid_dev(x)  choose_32_64(old_valid_dev(x),true)
-#define encode_dev(x) choose_32_64(old_encode_dev,new_encode_dev)(x)
-
 #ifndef INIT_STRUCT_STAT_PADDING
 #  define INIT_STRUCT_STAT_PADDING(st) memset(&st, 0, sizeof(st))
 #endif
@@ -345,7 +342,9 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 {
 	struct stat tmp;
 
-	if (!valid_dev(stat->dev) || !valid_dev(stat->rdev))
+	if (sizeof(tmp.st_dev) < 4 && !old_valid_dev(stat->dev))
+		return -EOVERFLOW;
+	if (sizeof(tmp.st_rdev) < 4 && !old_valid_dev(stat->rdev))
 		return -EOVERFLOW;
 #if BITS_PER_LONG == 32
 	if (stat->size > MAX_NON_LFS)
@@ -353,7 +352,7 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 #endif
 
 	INIT_STRUCT_STAT_PADDING(tmp);
-	tmp.st_dev = encode_dev(stat->dev);
+	tmp.st_dev = new_encode_dev(stat->dev);
 	tmp.st_ino = stat->ino;
 	if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
 		return -EOVERFLOW;
@@ -363,7 +362,7 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 		return -EOVERFLOW;
 	SET_UID(tmp.st_uid, from_kuid_munged(current_user_ns(), stat->uid));
 	SET_GID(tmp.st_gid, from_kgid_munged(current_user_ns(), stat->gid));
-	tmp.st_rdev = encode_dev(stat->rdev);
+	tmp.st_rdev = new_encode_dev(stat->rdev);
 	tmp.st_size = stat->size;
 	tmp.st_atime = stat->atime.tv_sec;
 	tmp.st_mtime = stat->mtime.tv_sec;
@@ -644,11 +643,13 @@ static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
 {
 	struct compat_stat tmp;
 
-	if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
+	if (sizeof(tmp.st_dev) < 4 && !old_valid_dev(stat->dev))
+		return -EOVERFLOW;
+	if (sizeof(tmp.st_rdev) < 4 && !old_valid_dev(stat->rdev))
 		return -EOVERFLOW;
 
 	memset(&tmp, 0, sizeof(tmp));
-	tmp.st_dev = old_encode_dev(stat->dev);
+	tmp.st_dev = new_encode_dev(stat->dev);
 	tmp.st_ino = stat->ino;
 	if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
 		return -EOVERFLOW;
@@ -658,7 +659,7 @@ static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
 		return -EOVERFLOW;
 	SET_UID(tmp.st_uid, from_kuid_munged(current_user_ns(), stat->uid));
 	SET_GID(tmp.st_gid, from_kgid_munged(current_user_ns(), stat->gid));
-	tmp.st_rdev = old_encode_dev(stat->rdev);
+	tmp.st_rdev = new_encode_dev(stat->rdev);
 	if ((u64) stat->size > MAX_NON_LFS)
 		return -EOVERFLOW;
 	tmp.st_size = stat->size;
Signature · 1 line
2.35.1
author maintainer
#73 lore raw

PATCH 73/124 VFS: filename_create(): fix incorrect intent.

In reply to Greg Kroah-Hartman

From: NeilBrown <[email protected]>

[ Upstream commit b3d4650d82c71b9c9a8184de9e8bb656012b289e ]

When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported.

However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour.

If you try

ln -s foo /path/dir/

where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT.

But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists.

So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned.

Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed.

---
 fs/namei.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)
fs/namei.c +10 -12
index 3bb65f48fe1d..8882a70dc119 100644
@@ -3625,18 +3625,14 @@ static struct dentry *filename_create(int dfd, struct filename *name,
 {
 	struct dentry *dentry = ERR_PTR(-EEXIST);
 	struct qstr last;
+	bool want_dir = lookup_flags & LOOKUP_DIRECTORY;
+	unsigned int reval_flag = lookup_flags & LOOKUP_REVAL;
+	unsigned int create_flags = LOOKUP_CREATE | LOOKUP_EXCL;
 	int type;
 	int err2;
 	int error;
-	bool is_dir = (lookup_flags & LOOKUP_DIRECTORY);
 
-	/*
-	 * Note that only LOOKUP_REVAL and LOOKUP_DIRECTORY matter here. Any
-	 * other flags passed in are ignored!
-	 */
-	lookup_flags &= LOOKUP_REVAL;
-
-	error = filename_parentat(dfd, name, lookup_flags, path, &last, &type);
+	error = filename_parentat(dfd, name, reval_flag, path, &last, &type);
 	if (error)
 		return ERR_PTR(error);
 
@@ -3650,11 +3646,13 @@ static struct dentry *filename_create(int dfd, struct filename *name,
 	/* don't fail immediately if it's r/o, at least try to report other errors */
 	err2 = mnt_want_write(path->mnt);
 	/*
-	 * Do the final lookup.
+	 * Do the final lookup.  Suppress 'create' if there is a trailing
+	 * '/', and a directory wasn't requested.
 	 */
-	lookup_flags |= LOOKUP_CREATE | LOOKUP_EXCL;
+	if (last.name[last.len] && !want_dir)
+		create_flags = 0;
 	inode_lock_nested(path->dentry->d_inode, I_MUTEX_PARENT);
-	dentry = __lookup_hash(&last, path->dentry, lookup_flags);
+	dentry = __lookup_hash(&last, path->dentry, reval_flag | create_flags);
 	if (IS_ERR(dentry))
 		goto unlock;
 
@@ -3668,7 +3666,7 @@ static struct dentry *filename_create(int dfd, struct filename *name,
 	 * all is fine. Let's be bastards - you had / on the end, you've
 	 * been asking for (non-existent) directory. -ENOENT for you.
 	 */
-	if (unlikely(!is_dir && last.name[last.len])) {
+	if (unlikely(!create_flags)) {
 		error = -ENOENT;
 		goto fail;
 	}
Signature · 1 line
2.35.1
author maintainer
#74 lore raw

PATCH 74/124 nvme: add a quirk to disable namespace identifiers

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 00ff400e6deee00f7b15e200205b2708b63b8cf6 ]

Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair.

The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up.

---
 drivers/nvme/host/core.c | 24 ++++++++++++++++++------
 drivers/nvme/host/nvme.h |  5 +++++
 2 files changed, 23 insertions(+), 6 deletions(-)
drivers/nvme/host/core.c +18 -6
index 4c35e9acf8ee..f2bb57615762 100644
@@ -1354,6 +1354,8 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids,
 				 warn_str, cur->nidl);
 			return -1;
 		}
+		if (ctrl->quirks & NVME_QUIRK_BOGUS_NID)
+			return NVME_NIDT_EUI64_LEN;
 		memcpy(ids->eui64, data + sizeof(*cur), NVME_NIDT_EUI64_LEN);
 		return NVME_NIDT_EUI64_LEN;
 	case NVME_NIDT_NGUID:
@@ -1362,6 +1364,8 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids,
 				 warn_str, cur->nidl);
 			return -1;
 		}
+		if (ctrl->quirks & NVME_QUIRK_BOGUS_NID)
+			return NVME_NIDT_NGUID_LEN;
 		memcpy(ids->nguid, data + sizeof(*cur), NVME_NIDT_NGUID_LEN);
 		return NVME_NIDT_NGUID_LEN;
 	case NVME_NIDT_UUID:
@@ -1370,6 +1374,8 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids,
 				 warn_str, cur->nidl);
 			return -1;
 		}
+		if (ctrl->quirks & NVME_QUIRK_BOGUS_NID)
+			return NVME_NIDT_UUID_LEN;
 		uuid_copy(&ids->uuid, data + sizeof(*cur));
 		return NVME_NIDT_UUID_LEN;
 	case NVME_NIDT_CSI:
@@ -1466,12 +1472,18 @@ static int nvme_identify_ns(struct nvme_ctrl *ctrl, unsigned nsid,
 	if ((*id)->ncap == 0) /* namespace not allocated or attached */
 		goto out_free_id;
 
-	if (ctrl->vs >= NVME_VS(1, 1, 0) &&
-	    !memchr_inv(ids->eui64, 0, sizeof(ids->eui64)))
-		memcpy(ids->eui64, (*id)->eui64, sizeof(ids->eui64));
-	if (ctrl->vs >= NVME_VS(1, 2, 0) &&
-	    !memchr_inv(ids->nguid, 0, sizeof(ids->nguid)))
-		memcpy(ids->nguid, (*id)->nguid, sizeof(ids->nguid));
+
+	if (ctrl->quirks & NVME_QUIRK_BOGUS_NID) {
+		dev_info(ctrl->device,
+			 "Ignoring bogus Namespace Identifiers\n");
+	} else {
+		if (ctrl->vs >= NVME_VS(1, 1, 0) &&
+		    !memchr_inv(ids->eui64, 0, sizeof(ids->eui64)))
+			memcpy(ids->eui64, (*id)->eui64, sizeof(ids->eui64));
+		if (ctrl->vs >= NVME_VS(1, 2, 0) &&
+		    !memchr_inv(ids->nguid, 0, sizeof(ids->nguid)))
+			memcpy(ids->nguid, (*id)->nguid, sizeof(ids->nguid));
+	}
 
 	return 0;
 
drivers/nvme/host/nvme.h +5 -0
index 0628e2d802e7..f1e5c7564cae 100644
@@ -144,6 +144,11 @@ enum nvme_quirks {
 	 * encoding the generation sequence number.
 	 */
 	NVME_QUIRK_SKIP_CID_GEN			= (1 << 17),
+
+	/*
+	 * Reports garbage in the namespace identifiers (eui64, nguid, uuid).
+	 */
+	NVME_QUIRK_BOGUS_NID			= (1 << 18),
 };
 
 /*
Signature · 1 line
2.35.1
author maintainer
#75 lore raw

PATCH 75/124 nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit a98a945b80f8684121d477ae68ebc01da953da1f ]

The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely.

---
 drivers/nvme/host/pci.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/nvme/host/pci.c +4 -0
index b925a5f4afc3..61f01f5afdc1 100644
@@ -3352,6 +3352,10 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0x2646, 0x2263),   /* KINGSTON A2000 NVMe SSD  */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
+	{ PCI_DEVICE(0x1e4B, 0x1002),   /* MAXIO MAP1002 */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
+	{ PCI_DEVICE(0x1e4B, 0x1202),   /* MAXIO MAP1202 */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0061),
 		.driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0065),
Signature · 1 line
2.35.1
author maintainer
#76 lore raw

PATCH 76/124 nvme-pci: disable namespace identifiers for Qemu controllers

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 66dd346b84d79fde20832ed691a54f4881eac20d ]

Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention.

---
 drivers/nvme/host/pci.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/nvme/host/pci.c +4 -1
index 61f01f5afdc1..d7695bdbde8d 100644
@@ -3314,7 +3314,10 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_VDEVICE(INTEL, 0x5845),	/* Qemu emulated controller */
 		.driver_data = NVME_QUIRK_IDENTIFY_CNS |
-				NVME_QUIRK_DISABLE_WRITE_ZEROES, },
+				NVME_QUIRK_DISABLE_WRITE_ZEROES |
+				NVME_QUIRK_BOGUS_NID, },
+	{ PCI_VDEVICE(REDHAT, 0x0010),	/* Qemu emulated controller */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x126f, 0x2263),	/* Silicon Motion unidentified */
 		.driver_data = NVME_QUIRK_NO_NS_DESC_LIST, },
 	{ PCI_DEVICE(0x1bb1, 0x0100),   /* Seagate Nytro Flash Storage */
Signature · 1 line
2.35.1
author maintainer
#77 lore raw

PATCH 77/124 EDAC/synopsys: Read the error count from the correct register

In reply to Greg Kroah-Hartman

From: Shubhrajyoti Datta <[email protected]>

commit e2932d1f6f055b2af2114c7e64a26dc1b5593d0c upstream.

Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT).

[ bp: Massage. ]

---
 drivers/edac/synopsys_edac.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/edac/synopsys_edac.c +11 -5
@@ -163,6 +163,11 @@
 #define ECC_STAT_CECNT_SHIFT		8
 #define ECC_STAT_BITNUM_MASK		0x7F
 
+/* ECC error count register definitions */
+#define ECC_ERRCNT_UECNT_MASK		0xFFFF0000
+#define ECC_ERRCNT_UECNT_SHIFT		16
+#define ECC_ERRCNT_CECNT_MASK		0xFFFF
+
 /* DDR QOS Interrupt register definitions */
 #define DDR_QOS_IRQ_STAT_OFST		0x20200
 #define DDR_QOSUE_MASK			0x4
@@ -418,15 +423,16 @@ static int zynqmp_get_error_info(struct
 	base = priv->baseaddr;
 	p = &priv->stat;
 
+	regval = readl(base + ECC_ERRCNT_OFST);
+	p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
+	p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
+	if (!p->ce_cnt)
+		goto ue_err;
+
 	regval = readl(base + ECC_STAT_OFST);
 	if (!regval)
 		return 1;
 
-	p->ce_cnt = (regval & ECC_STAT_CECNT_MASK) >> ECC_STAT_CECNT_SHIFT;
-	p->ue_cnt = (regval & ECC_STAT_UECNT_MASK) >> ECC_STAT_UECNT_SHIFT;
-	if (!p->ce_cnt)
-		goto ue_err;
-
 	p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
 
 	regval = readl(base + ECC_CEADDR0_OFST);
author maintainer
#78 lore raw

PATCH 78/124 mm/memory-failure.c: skip huge_zero_page in memory_failure()

In reply to Greg Kroah-Hartman

From: Xu Yu <[email protected]>

commit d173d5417fb67411e623d394aab986d847e47dad upstream.

Kernel panic when injecting memory_failure for the global

huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows.

Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0
flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff)

  raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000
  page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head))
  ------------[ cut here ]------------
  kernel BUG at mm/huge_memory.c:2499!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014
  RIP: 0010:split_huge_page_to_list+0x66a/0x880
  Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b
  RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246
  RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff
  RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff
  R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000
  R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40
  FS:  00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   try_to_split_thp_page+0x3a/0x130
   memory_failure+0x128/0x800
   madvise_inject_error.cold+0x8b/0xa1
   __x64_sys_madvise+0x54/0x60
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7fc3754f8bf9
  Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
  RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9
  RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000
  RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000
  R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490
  R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000

This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again.

---
 mm/memory-failure.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
mm/memory-failure.c +13 -0
@@ -1690,6 +1690,19 @@ try_again:
 
 	if (PageTransHuge(hpage)) {
 		/*
+		 * Bail out before SetPageHasHWPoisoned() if hpage is
+		 * huge_zero_page, although PG_has_hwpoisoned is not
+		 * checked in set_huge_zero_page().
+		 *
+		 * TODO: Handle memory failure of huge_zero_page thoroughly.
+		 */
+		if (is_huge_zero_page(hpage)) {
+			action_result(pfn, MF_MSG_UNSPLIT_THP, MF_IGNORED);
+			res = -EBUSY;
+			goto unlock_mutex;
+		}
+
+		/*
 		 * The flag must be set after the refcount is bumped
 		 * otherwise it may race with THP split.
 		 * And the flag can't be set in get_hwpoison_page() since
author maintainer
#79 lore raw

PATCH 79/124 memcg: sync flush only if periodic flush is delayed

In reply to Greg Kroah-Hartman

From: Shakeel Butt <[email protected]>

commit 9b3016154c913b2e7ec5ae5c9a42eb9e732d86aa upstream.

Daniel Dao has reported [1] a regression on workloads that may trigger a lot of refaults (anon and file). The underlying issue is that flushing rstat is expensive. Although rstat flush are batched with (nr_cpus * MEMCG_BATCH) stat updates, it seems like there are workloads which genuinely do stat updates larger than batch value within short amount of time. Since the rstat flush can happen in the performance critical codepaths like page faults, such workload can suffer greatly.

This patch fixes this regression by making the rstat flushing conditional in the performance critical codepaths. More specifically, the kernel relies on the async periodic rstat flusher to flush the stats and only if the periodic flusher is delayed by more than twice the amount of its normal time window then the kernel allows rstat flushing from the performance critical codepaths.

Now the question: what are the side-effects of this change? The worst that can happen is the refault codepath will see 4sec old lruvec stats and may cause false (or missed) activations of the refaulted page which may under-or-overestimate the workingset size. Though that is not very concerning as the kernel can already miss or do false activations.

There are two more codepaths whose flushing behavior is not changed by this patch and we may need to come to them in future. One is the writeback stats used by dirty throttling and second is the deactivation heuristic in the reclaim. For now keeping an eye on them and if there is report of regression due to these codepaths, we will reevaluate then.

---
 include/linux/memcontrol.h |    5 +++++
 mm/memcontrol.c            |   12 +++++++++++-
 mm/workingset.c            |    2 +-
 3 files changed, 17 insertions(+), 2 deletions(-)
include/linux/memcontrol.h +5 -0
@@ -1002,6 +1002,7 @@ static inline unsigned long lruvec_page_
 }
 
 void mem_cgroup_flush_stats(void);
+void mem_cgroup_flush_stats_delayed(void);
 
 void __mod_memcg_lruvec_state(struct lruvec *lruvec, enum node_stat_item idx,
 			      int val);
@@ -1422,6 +1423,10 @@ static inline void mem_cgroup_flush_stat
 {
 }
 
+static inline void mem_cgroup_flush_stats_delayed(void)
+{
+}
+
 static inline void __mod_memcg_lruvec_state(struct lruvec *lruvec,
 					    enum node_stat_item idx, int val)
 {
mm/memcontrol.c +11 -1
@@ -650,6 +650,9 @@ static DECLARE_DEFERRABLE_WORK(stats_flu
 static DEFINE_SPINLOCK(stats_flush_lock);
 static DEFINE_PER_CPU(unsigned int, stats_updates);
 static atomic_t stats_flush_threshold = ATOMIC_INIT(0);
+static u64 flush_next_time;
+
+#define FLUSH_TIME (2UL*HZ)
 
 static inline void memcg_rstat_updated(struct mem_cgroup *memcg, int val)
 {
@@ -671,6 +674,7 @@ static void __mem_cgroup_flush_stats(voi
 	if (!spin_trylock_irqsave(&stats_flush_lock, flag))
 		return;
 
+	flush_next_time = jiffies_64 + 2*FLUSH_TIME;
 	cgroup_rstat_flush_irqsafe(root_mem_cgroup->css.cgroup);
 	atomic_set(&stats_flush_threshold, 0);
 	spin_unlock_irqrestore(&stats_flush_lock, flag);
@@ -682,10 +686,16 @@ void mem_cgroup_flush_stats(void)
 		__mem_cgroup_flush_stats();
 }
 
+void mem_cgroup_flush_stats_delayed(void)
+{
+	if (time_after64(jiffies_64, flush_next_time))
+		mem_cgroup_flush_stats();
+}
+
 static void flush_memcg_stats_dwork(struct work_struct *w)
 {
 	__mem_cgroup_flush_stats();
-	queue_delayed_work(system_unbound_wq, &stats_flush_dwork, 2UL*HZ);
+	queue_delayed_work(system_unbound_wq, &stats_flush_dwork, FLUSH_TIME);
 }
 
 /**
mm/workingset.c +1 -1
@@ -352,7 +352,7 @@ void workingset_refault(struct page *pag
 
 	inc_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file);
 
-	mem_cgroup_flush_stats();
+	mem_cgroup_flush_stats_delayed();
 	/*
 	 * Compare the distance to the existing workingset size. We
 	 * don't activate pages that couldn't stay resident even if
author maintainer
#80 lore raw

PATCH 80/124 mm, hugetlb: allow for "high" userspace addresses

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream.

This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb.

This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function.

So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h

If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them.

For the time being, only ARM64 is affected by this change.

Catalin (ARM64) said
"We should have fixed hugetlb_get_unmapped_area() as well when we added
support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this.

It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent.

Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)"

---
 fs/hugetlbfs/inode.c     |    9 +++++----
 include/linux/sched/mm.h |    8 ++++++++
 mm/mmap.c                |    8 --------
 3 files changed, 13 insertions(+), 12 deletions(-)
fs/hugetlbfs/inode.c +5 -4
@@ -206,7 +206,7 @@ hugetlb_get_unmapped_area_bottomup(struc
 	info.flags = 0;
 	info.length = len;
 	info.low_limit = current->mm->mmap_base;
-	info.high_limit = TASK_SIZE;
+	info.high_limit = arch_get_mmap_end(addr);
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
 	return vm_unmapped_area(&info);
@@ -222,7 +222,7 @@ hugetlb_get_unmapped_area_topdown(struct
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
-	info.high_limit = current->mm->mmap_base;
+	info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
 	addr = vm_unmapped_area(&info);
@@ -237,7 +237,7 @@ hugetlb_get_unmapped_area_topdown(struct
 		VM_BUG_ON(addr != -ENOMEM);
 		info.flags = 0;
 		info.low_limit = current->mm->mmap_base;
-		info.high_limit = TASK_SIZE;
+		info.high_limit = arch_get_mmap_end(addr);
 		addr = vm_unmapped_area(&info);
 	}
 
@@ -251,6 +251,7 @@ hugetlb_get_unmapped_area(struct file *f
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	struct hstate *h = hstate_file(file);
+	const unsigned long mmap_end = arch_get_mmap_end(addr);
 
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
@@ -266,7 +267,7 @@ hugetlb_get_unmapped_area(struct file *f
 	if (addr) {
 		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
+		if (mmap_end - len >= addr &&
 		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
include/linux/sched/mm.h +8 -0
@@ -106,6 +106,14 @@ static inline void mm_update_next_owner(
 #endif /* CONFIG_MEMCG */
 
 #ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr)	(TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
 extern void arch_pick_mmap_layout(struct mm_struct *mm,
 				  struct rlimit *rlim_stack);
 extern unsigned long
mm/mmap.c +0 -8
@@ -2113,14 +2113,6 @@ unsigned long vm_unmapped_area(struct vm
 	return addr;
 }
 
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr)	(TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
 /* Get an address range which is currently unmapped.
  * For shmat() with addr=0.
  *
author maintainer
#81 lore raw

PATCH 81/124 oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup

In reply to Greg Kroah-Hartman

From: Nico Pache <[email protected]>

commit e4a38402c36e42df28eb1a5394be87e6571fb48a upstream.

The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which can be targeted by the oom reaper. This mapping is used to store the futex robust list head; the kernel does not keep a copy of the robust list and instead references a userspace address to maintain the robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom reaper to free the memory of the futex robust list before the exit path has handled the futex death:

CPU1 CPU2
--------------------------------------------------------------------
page_fault
do_exit "signal"
wake_oom_reaper
oom_reaper oom_reap_task_mm (invalidates mm)
exit_mm
exit_mm_release
futex_exit_release
futex_cleanup
exit_robust_list
get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Fixes 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Cc Rafael Aquini <[email protected]>
Cc Waiman Long <[email protected]>
Cc Herton R. Krzesinski <[email protected]>
Cc Juri Lelli <[email protected]>
Cc Vincent Guittot <[email protected]>
Cc Dietmar Eggemann <[email protected]>
Cc Steven Rostedt <[email protected]>
Cc Ben Segall <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Daniel Bristot de Oliveira <[email protected]>
Cc David Rientjes <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Joel Savitz <[email protected]>
Cc Darren Hart <[email protected]>
---
 include/linux/sched.h |    1 
 mm/oom_kill.c         |   54 +++++++++++++++++++++++++++++++++++++-------------
 2 files changed, 41 insertions(+), 14 deletions(-)
include/linux/sched.h +1 -0
@@ -1436,6 +1436,7 @@ struct task_struct {
 	int				pagefault_disabled;
 #ifdef CONFIG_MMU
 	struct task_struct		*oom_reaper_list;
+	struct timer_list		oom_reaper_timer;
 #endif
 #ifdef CONFIG_VMAP_STACK
 	struct vm_struct		*stack_vm_area;
mm/oom_kill.c +40 -14

109 lines not on this page · raw message

author maintainer
#82 lore raw

PATCH 82/124 mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()

In reply to Greg Kroah-Hartman

From: Alistair Popple <[email protected]>

commit 319561669a59d8e9206ab311ae5433ef92fd79d1 upstream.

In some cases it is possible for mmu_interval_notifier_remove() to race with mn_tree_inv_end() allowing it to return while the notifier data structure is still in use. Consider the following sequence:

  CPU0 - mn_tree_inv_end()            CPU1 - mmu_interval_notifier_remove()
  ----------------------------------- ------------------------------------
                                      spin_lock(subscriptions->lock);
                                      seq = subscriptions->invalidate_seq;
  spin_lock(subscriptions->lock);     spin_unlock(subscriptions->lock);
  subscriptions->invalidate_seq++;
                                      wait_event(invalidate_seq != seq);
                                      return;
  interval_tree_remove(interval_sub); kfree(interval_sub);
  spin_unlock(subscriptions->lock);
  wake_up_all();

As the wait_event() condition is true it will return immediately. This can lead to use-after-free type errors if the caller frees the data structure containing the interval notifier subscription while it is still on a deferred list. Fix this by taking the appropriate lock when reading invalidate_seq to ensure proper synchronisation.

I observed this whilst running stress testing during some development. You do have to be pretty unlucky, but it leads to the usual problems of use-after-free (memory corruption, kernel crash, difficult to diagnose WARN_ON, etc).

Fixes 99cb252f5e68 ("mm/mmu_notifier: add an interval tree notifier")
Cc Christian König <[email protected]>
Cc John Hubbard <[email protected]>
Cc Ralph Campbell <[email protected]>
---
 mm/mmu_notifier.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
mm/mmu_notifier.c +13 -1
@@ -1036,6 +1036,18 @@ int mmu_interval_notifier_insert_locked(
 }
 EXPORT_SYMBOL_GPL(mmu_interval_notifier_insert_locked);
 
+static bool
+mmu_interval_seq_released(struct mmu_notifier_subscriptions *subscriptions,
+			  unsigned long seq)
+{
+	bool ret;
+
+	spin_lock(&subscriptions->lock);
+	ret = subscriptions->invalidate_seq != seq;
+	spin_unlock(&subscriptions->lock);
+	return ret;
+}
+
 /**
  * mmu_interval_notifier_remove - Remove a interval notifier
  * @interval_sub: Interval subscription to unregister
@@ -1083,7 +1095,7 @@ void mmu_interval_notifier_remove(struct
 	lock_map_release(&__mmu_notifier_invalidate_range_start_map);
 	if (seq)
 		wait_event(subscriptions->wq,
-			   READ_ONCE(subscriptions->invalidate_seq) != seq);
+			   mmu_interval_seq_released(subscriptions, seq));
 
 	/* pairs with mmgrab in mmu_interval_notifier_insert() */
 	mmdrop(mm);
author maintainer
#83 lore raw

PATCH 83/124 ata: pata_marvell: Check the bmdma_addr beforing reading

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

commit aafa9f958342db36c17ac2a7f1b841032c96feb4 upstream.

Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  <TASK>
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0
---
 drivers/ata/pata_marvell.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/ata/pata_marvell.c +2 -0
@@ -83,6 +83,8 @@ static int marvell_cable_detect(struct a
 	switch(ap->port_no)
 	{
 	case 0:
+		if (!ap->ioaddr.bmdma_addr)
+			return ATA_CBL_PATA_UNK;
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
 			return ATA_CBL_PATA40;
 		return ATA_CBL_PATA80;
author maintainer
#84 lore raw

PATCH 84/124 dma: at_xdmac: fix a missing check on list iterator

In reply to Greg Kroah-Hartman

From: Xiaomeng Tong <[email protected]>

commit 206680c4e46b62fd8909385e0874a36952595b85 upstream.

The bug is here:

	__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);

The list iterator 'desc' will point to a bogus position containing HEAD if the list is empty or no element is found. To avoid dev_dbg() prints a invalid address, use a new variable 'iter' as the list iterator, while use the origin variable 'desc' as a dedicated pointer to point to the found element.

Fixes 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
---
 drivers/dma/at_xdmac.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/dma/at_xdmac.c +7 -5
@@ -1450,7 +1450,7 @@ at_xdmac_tx_status(struct dma_chan *chan
 {
 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
 	struct at_xdmac		*atxdmac = to_at_xdmac(atchan->chan.device);
-	struct at_xdmac_desc	*desc, *_desc;
+	struct at_xdmac_desc	*desc, *_desc, *iter;
 	struct list_head	*descs_list;
 	enum dma_status		ret;
 	int			residue, retry;
@@ -1565,11 +1565,13 @@ at_xdmac_tx_status(struct dma_chan *chan
 	 * microblock.
 	 */
 	descs_list = &desc->descs_list;
-	list_for_each_entry_safe(desc, _desc, descs_list, desc_node) {
-		dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
-		residue -= (desc->lld.mbr_ubc & 0xffffff) << dwidth;
-		if ((desc->lld.mbr_nda & 0xfffffffc) == cur_nda)
+	list_for_each_entry_safe(iter, _desc, descs_list, desc_node) {
+		dwidth = at_xdmac_get_dwidth(iter->lld.mbr_cfg);
+		residue -= (iter->lld.mbr_ubc & 0xffffff) << dwidth;
+		if ((iter->lld.mbr_nda & 0xfffffffc) == cur_nda) {
+			desc = iter;
 			break;
+		}
 	}
 	residue += cur_ubc << dwidth;
 
author maintainer
#85 lore raw

PATCH 85/124 dmaengine: imx-sdma: fix init of uart scripts

In reply to Greg Kroah-Hartman

From: Kevin Groeneveld <[email protected]>

commit a3ae97f4c87d9570e7e9a3e3324c443757f6e29a upstream.

Commit b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script") broke uart rx on imx5 when using sdma firmware from older Freescale 2.6.35 kernel. In this case reading addr->uartXX_2_mcu_addr was going out of bounds of the firmware memory and corrupting the uart script addresses.

Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr does not work as the uartXX_2_mcu_addr members are now beyond the size of the older firmware and the uart addresses would never be populated in that case. There are other ways to fix this but overall the logic seems clearer to me to revert the uartXX_2_mcu_ram_addr structure entries back to uartXX_2_mcu_addr, change the newer entries to uartXX_2_mcu_rom_addr and update the logic accordingly.

I have tested this patch on:
1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel. Without this patch uart rx is broken in this scenario, with the patch uart rx is restored.
2. An i.MX6D system with no external sdma firmware. uart is okay with or without this patch.
3. An i.MX8MM system using current sdma-imx7d.bin firmware from linux-firmware. uart is okay with or without this patch and I confirmed the rom version of the uart script is being used which was the intention and reason for commit b98ce2f4e32b ("dmaengine:
imx-sdma: add uart rom script") in the first place.

---
 drivers/dma/imx-sdma.c |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
drivers/dma/imx-sdma.c +14 -14
@@ -198,12 +198,12 @@ struct sdma_script_start_addrs {
 	s32 per_2_firi_addr;
 	s32 mcu_2_firi_addr;
 	s32 uart_2_per_addr;
-	s32 uart_2_mcu_ram_addr;
+	s32 uart_2_mcu_addr;
 	s32 per_2_app_addr;
 	s32 mcu_2_app_addr;
 	s32 per_2_per_addr;
 	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_ram_addr;
+	s32 uartsh_2_mcu_addr;
 	s32 per_2_shp_addr;
 	s32 mcu_2_shp_addr;
 	s32 ata_2_mcu_addr;
@@ -232,8 +232,8 @@ struct sdma_script_start_addrs {
 	s32 mcu_2_ecspi_addr;
 	s32 mcu_2_sai_addr;
 	s32 sai_2_mcu_addr;
-	s32 uart_2_mcu_addr;
-	s32 uartsh_2_mcu_addr;
+	s32 uart_2_mcu_rom_addr;
+	s32 uartsh_2_mcu_rom_addr;
 	/* End of v3 array */
 	s32 mcu_2_zqspi_addr;
 	/* End of v4 array */
@@ -1780,17 +1780,17 @@ static void sdma_add_scripts(struct sdma
 			saddr_arr[i] = addr_arr[i];
 
 	/*
-	 * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because
-	 * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr
-	 * to be compatible with legacy freescale/nxp sdma firmware, and they
-	 * are located in the bottom part of sdma_script_start_addrs which are
-	 * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1.
+	 * For compatibility with NXP internal legacy kernel before 4.19 which
+	 * is based on uart ram script and mainline kernel based on uart rom
+	 * script, both uart ram/rom scripts are present in newer sdma
+	 * firmware. Use the rom versions if they are present (V3 or newer).
 	 */
-	if (addr->uart_2_mcu_addr)
-		sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr;
-	if (addr->uartsh_2_mcu_addr)
-		sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr;
-
+	if (sdma->script_number >= SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3) {
+		if (addr->uart_2_mcu_rom_addr)
+			sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_rom_addr;
+		if (addr->uartsh_2_mcu_rom_addr)
+			sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_rom_addr;
+	}
 }
 
 static void sdma_load_firmware(const struct firmware *fw, void *context)
author maintainer
#86 lore raw

PATCH 86/124 net: atlantic: invert deep par in pm functions, preventing null derefs

In reply to Greg Kroah-Hartman

From: Manuel Ullmann <[email protected]>

commit cbe6c3a8f8f4315b96e46e1a1c70393c06d95a4c upstream.

This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing.

The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq.

BUG: kernel NULL pointer dereference
RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic]
aq_vec_init+0x85/0xe0 [atlantic]
aq_nic_init+0xf7/0x1d0 [atlantic]
atl_resume_common+0x4f/0x100 [atlantic]
pci_pm_thaw+0x42/0xa0

resolves in aq_ring.o to

```
0000000000000ae0 <aq_ring_rx_fill>:
{
/* ... */
 baf:	48 8b 43 08          	mov    0x8(%rbx),%rax
 		buff->flags = 0U; /* buff is NULL */
```

The bug has been present since the introduction of the new pm code in 8aaa112a57c1 ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271697a ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing.

So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that.

First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far.

#regzbot introduced: 8ce84271697a
#regzbot from: koo5 <[email protected]> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32

---
 drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +4 -4
@@ -444,22 +444,22 @@ err_exit:
 
 static int aq_pm_freeze(struct device *dev)
 {
-	return aq_suspend_common(dev, false);
+	return aq_suspend_common(dev, true);
 }
 
 static int aq_pm_suspend_poweroff(struct device *dev)
 {
-	return aq_suspend_common(dev, true);
+	return aq_suspend_common(dev, false);
 }
 
 static int aq_pm_thaw(struct device *dev)
 {
-	return atl_resume_common(dev, false);
+	return atl_resume_common(dev, true);
 }
 
 static int aq_pm_resume_restore(struct device *dev)
 {
-	return atl_resume_common(dev, true);
+	return atl_resume_common(dev, false);
 }
 
 static const struct dev_pm_ops aq_pm_ops = {
author maintainer
#87 lore raw

PATCH 87/124 Input: omap4-keypad - fix pm_runtime_get_sync() error checking

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 81022a170462d38ea10612cb67e8e2c529d58abe ]

If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors.

Fixes f77621cc640a ("Input: omap-keypad - dynamically handle register offsets")
---
 drivers/input/keyboard/omap4-keypad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/keyboard/omap4-keypad.c +1 -1
index 43375b38ee59..8a7ce41b8c56 100644
@@ -393,7 +393,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	 * revision register.
 	 */
 	error = pm_runtime_get_sync(dev);
-	if (error) {
+	if (error < 0) {
 		dev_err(dev, "pm_runtime_get_sync() failed\n");
 		pm_runtime_put_noidle(dev);
 		return error;
Signature · 1 line
2.35.1
author maintainer
#88 lore raw

PATCH 88/124 scsi: sr: Do not leak information in ioctl

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit faad6cebded8e0fd902b672f220449b93db479eb ]

sr_ioctl.c uses this pattern:

  result = sr_do_ioctl(cd, &cgc);
  to-user = buffer[];
  kfree(buffer);
  return result;

Use of a buffer without checking leaks information. Check result and jump over the use of buffer if there is an error.

result = sr_do_ioctl(cd, &cgc);
if (result)

    goto err;

to-user = buffer[];
err:
kfree(buffer);
return result;

Additionally, initialize the buffer to zero.

This problem can be seen in the 2.4.0 kernel.

---
 drivers/scsi/sr_ioctl.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/scsi/sr_ioctl.c +12 -3
index ddd00efc4882..fbdb5124d7f7 100644
@@ -41,7 +41,7 @@ static int sr_read_tochdr(struct cdrom_device_info *cdi,
 	int result;
 	unsigned char *buffer;
 
-	buffer = kmalloc(32, GFP_KERNEL);
+	buffer = kzalloc(32, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
@@ -55,10 +55,13 @@ static int sr_read_tochdr(struct cdrom_device_info *cdi,
 	cgc.data_direction = DMA_FROM_DEVICE;
 
 	result = sr_do_ioctl(cd, &cgc);
+	if (result)
+		goto err;
 
 	tochdr->cdth_trk0 = buffer[2];
 	tochdr->cdth_trk1 = buffer[3];
 
+err:
 	kfree(buffer);
 	return result;
 }
@@ -71,7 +74,7 @@ static int sr_read_tocentry(struct cdrom_device_info *cdi,
 	int result;
 	unsigned char *buffer;
 
-	buffer = kmalloc(32, GFP_KERNEL);
+	buffer = kzalloc(32, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
@@ -86,6 +89,8 @@ static int sr_read_tocentry(struct cdrom_device_info *cdi,
 	cgc.data_direction = DMA_FROM_DEVICE;
 
 	result = sr_do_ioctl(cd, &cgc);
+	if (result)
+		goto err;
 
 	tocentry->cdte_ctrl = buffer[5] & 0xf;
 	tocentry->cdte_adr = buffer[5] >> 4;
@@ -98,6 +103,7 @@ static int sr_read_tocentry(struct cdrom_device_info *cdi,
 		tocentry->cdte_addr.lba = (((((buffer[8] << 8) + buffer[9]) << 8)
 			+ buffer[10]) << 8) + buffer[11];
 
+err:
 	kfree(buffer);
 	return result;
 }
@@ -384,7 +390,7 @@ int sr_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
 {
 	Scsi_CD *cd = cdi->handle;
 	struct packet_command cgc;
-	char *buffer = kmalloc(32, GFP_KERNEL);
+	char *buffer = kzalloc(32, GFP_KERNEL);
 	int result;
 
 	if (!buffer)
@@ -400,10 +406,13 @@ int sr_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
 	cgc.data_direction = DMA_FROM_DEVICE;
 	cgc.timeout = IOCTL_TIMEOUT;
 	result = sr_do_ioctl(cd, &cgc);
+	if (result)
+		goto err;
 
 	memcpy(mcn->medium_catalog_number, buffer + 9, 13);
 	mcn->medium_catalog_number[13] = 0;
 
+err:
 	kfree(buffer);
 	return result;
 }
Signature · 1 line
2.35.1
author maintainer
#89 lore raw

PATCH 89/124 sched/pelt: Fix attach_entity_load_avg() corner case

In reply to Greg Kroah-Hartman

From: kuyo chang <[email protected]>

[ Upstream commit 40f5aa4c5eaebfeaca4566217cb9c468e28ed682 ]

The warning in cfs_rq_is_decayed() triggered:

    SCHED_WARN_ON(cfs_rq->avg.load_avg ||
		  cfs_rq->avg.util_avg ||
		  cfs_rq->avg.runnable_avg)

There exists a corner case in attach_entity_load_avg() which will cause load_sum to be zero while load_avg will not be.

Consider se_weight is 88761 as per the sched_prio_to_weight[] table. Further assume the get_pelt_divider() is 47742, this gives:
se->avg.load_avg is 1.

However, calculating load_sum:

se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se)); se->avg.load_sum = 1*47742/88761 = 0.

Then enqueue_load_avg() adds this to the cfs_rq totals:

  cfs_rq->avg.load_avg += se->avg.load_avg;
  cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum;

Resulting in load_avg being 1 with load_sum is 0, which will trigger the WARN.

Fixes f207934fb79d ("sched/fair: Align PELT windows between cfs_rq and its se")
[peterz: massage changelog]
---
 kernel/sched/fair.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
kernel/sched/fair.c +5 -5
index 02766f3fe206..9a4fa22a69ed 100644
@@ -3794,11 +3794,11 @@ static void attach_entity_load_avg(struct cfs_rq *cfs_rq, struct sched_entity *s
 
 	se->avg.runnable_sum = se->avg.runnable_avg * divider;
 
-	se->avg.load_sum = divider;
-	if (se_weight(se)) {
-		se->avg.load_sum =
-			div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se));
-	}
+	se->avg.load_sum = se->avg.load_avg * divider;
+	if (se_weight(se) < se->avg.load_sum)
+		se->avg.load_sum = div_u64(se->avg.load_sum, se_weight(se));
+	else
+		se->avg.load_sum = 1;
 
 	enqueue_load_avg(cfs_rq, se);
 	cfs_rq->avg.util_avg += se->avg.util_avg;
Signature · 1 line
2.35.1
author maintainer
#90 lore raw

PATCH 90/124 perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

In reply to Greg Kroah-Hartman

From: Zhipeng Xie <[email protected]>

[ Upstream commit 60490e7966659b26d74bf1fa4aa8693d9a94ca88 ]

This problem can be reproduced with CONFIG_PERF_USE_VMALLOC enabled on both x86_64 and aarch64 arch when using sysdig -B(using ebpf)[1]. sysdig -B works fine after rebuilding the kernel with CONFIG_PERF_USE_VMALLOC disabled.

I tracked it down to the if condition event->rb->nr_pages != nr_pages in perf_mmap is true when CONFIG_PERF_USE_VMALLOC is enabled where event->rb->nr_pages = 1 and nr_pages = 2048 resulting perf_mmap to return -EINVAL. This is because when CONFIG_PERF_USE_VMALLOC is enabled, rb->nr_pages is always equal to 1.

Arch with CONFIG_PERF_USE_VMALLOC enabled by default:
arc/arm/csky/mips/sh/sparc/xtensa

Arch with CONFIG_PERF_USE_VMALLOC disabled by default:

	x86_64/aarch64/...

Fix this problem by using data_page_nr()

[1] https://github.com/draios/sysdig

Fixes 906010b2134e ("perf_event: Provide vmalloc() based mmap() backing")
---
 kernel/events/core.c        | 2 +-
 kernel/events/internal.h    | 5 +++++
 kernel/events/ring_buffer.c | 5 -----
 3 files changed, 6 insertions(+), 6 deletions(-)
kernel/events/core.c +1 -1
index 699446d60b6b..7c891a8eb323 100644
@@ -6348,7 +6348,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 again:
 	mutex_lock(&event->mmap_mutex);
 	if (event->rb) {
-		if (event->rb->nr_pages != nr_pages) {
+		if (data_page_nr(event->rb) != nr_pages) {
 			ret = -EINVAL;
 			goto unlock;
 		}
kernel/events/internal.h +5 -0
index 228801e20788..aa23ffdaf819 100644
@@ -116,6 +116,11 @@ static inline int page_order(struct perf_buffer *rb)
 }
 #endif
 
+static inline int data_page_nr(struct perf_buffer *rb)
+{
+	return rb->nr_pages << page_order(rb);
+}
+
 static inline unsigned long perf_data_size(struct perf_buffer *rb)
 {
 	return rb->nr_pages << (PAGE_SHIFT + page_order(rb));
kernel/events/ring_buffer.c +0 -5
index 52868716ec35..fb35b926024c 100644
@@ -859,11 +859,6 @@ void rb_free(struct perf_buffer *rb)
 }
 
 #else
-static int data_page_nr(struct perf_buffer *rb)
-{
-	return rb->nr_pages << page_order(rb);
-}
-
 static struct page *
 __perf_mmap_to_page(struct perf_buffer *rb, unsigned long pgoff)
 {
Signature · 1 line
2.35.1
author maintainer
#91 lore raw

PATCH 91/124 drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ]

If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL.

Use ts->i2c->dev instead, which is initialised earlier in probe.

Fixes 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +1 -1
index 46029c5610c8..1f805eb8fdb5 100644
@@ -229,7 +229,7 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
 
 	ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
 	if (ret)
-		dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+		dev_err(&ts->i2c->dev, "I2C write failed: %d\n", ret);
 }
 
 static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
Signature · 1 line
2.35.1
author maintainer
#92 lore raw

PATCH 92/124 drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ]

The panel has a prepare call which is before video starts, and an enable call which is after.
The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare.

Fixes 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +9 -2
index 1f805eb8fdb5..145047e19394 100644
@@ -265,7 +265,7 @@ static int rpi_touchscreen_noop(struct drm_panel *panel)
 	return 0;
 }
 
-static int rpi_touchscreen_enable(struct drm_panel *panel)
+static int rpi_touchscreen_prepare(struct drm_panel *panel)
 {
 	struct rpi_touchscreen *ts = panel_to_ts(panel);
 	int i;
@@ -295,6 +295,13 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
 	rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01);
 	msleep(100);
 
+	return 0;
+}
+
+static int rpi_touchscreen_enable(struct drm_panel *panel)
+{
+	struct rpi_touchscreen *ts = panel_to_ts(panel);
+
 	/* Turn on the backlight. */
 	rpi_touchscreen_i2c_write(ts, REG_PWM, 255);
 
@@ -349,7 +356,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel,
 static const struct drm_panel_funcs rpi_touchscreen_funcs = {
 	.disable = rpi_touchscreen_disable,
 	.unprepare = rpi_touchscreen_noop,
-	.prepare = rpi_touchscreen_noop,
+	.prepare = rpi_touchscreen_prepare,
 	.enable = rpi_touchscreen_enable,
 	.get_modes = rpi_touchscreen_get_modes,
 };
Signature · 1 line
2.35.1
author maintainer
#93 lore raw

PATCH 93/124 KVM: PPC: Fix TCE handling for VFIO

In reply to Greg Kroah-Hartman

From: Alexey Kardashevskiy <[email protected]>

[ Upstream commit 26a62b750a4e6364b0393562f66759b1494c3a01 ]

The LoPAPR spec defines a guest visible IOMMU with a variable page size. Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks the biggest (16MB). In the case of a passed though PCI device, there is a hardware IOMMU which does not support all pages sizes from the above - P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated 16M IOMMU page we may create several smaller mappings ("TCEs") in the hardware IOMMU.

The code wrongly uses the emulated TCE index instead of hardware TCE index in error handling. The problem is easier to see on POWER8 with multi-level TCE tables (when only the first level is preallocated) as hash mode uses real mode TCE hypercalls handlers.
The kernel starts using indirect tables when VMs get bigger than 128GB (depends on the max page order).
The very first real mode hcall is going to fail with H_TOO_HARD as in the real mode we cannot allocate memory for TCEs (we can in the virtual mode) but on the way out the code attempts to clear hardware TCEs using emulated TCE indexes which corrupts random kernel memory because it_offset==1<<59 is subtracted from those indexes and the resulting index is out of the TCE table bounds.

This fixes kvmppc_clear_tce() to use the correct TCE indexes.

While at it, this fixes TCE cache invalidation which uses emulated TCE indexes instead of the hardware ones. This went unnoticed as 64bit DMA is used these days and VMs map all RAM in one go and only then do DMA and this is when the TCE cache gets populated.

Potentially this could slow down mapping, however normally 16MB emulated pages are backed by 64K hardware pages so it is one write to the "TCE Kill" per 256 updates which is not that bad considering the size of the cache (1024 TCEs or so).

Fixes ca1fc489cfa0 ("KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages")
---
 arch/powerpc/kvm/book3s_64_vio.c    | 45 +++++++++++++++--------------
 arch/powerpc/kvm/book3s_64_vio_hv.c | 44 ++++++++++++++--------------
 2 files changed, 45 insertions(+), 44 deletions(-)
arch/powerpc/kvm/book3s_64_vio.c +23 -22
index 6365087f3160..3cb2e05a7ee8 100644
@@ -421,13 +421,19 @@ static void kvmppc_tce_put(struct kvmppc_spapr_tce_table *stt,
 	tbl[idx % TCES_PER_PAGE] = tce;
 }
 
-static void kvmppc_clear_tce(struct mm_struct *mm, struct iommu_table *tbl,
-		unsigned long entry)
+static void kvmppc_clear_tce(struct mm_struct *mm, struct kvmppc_spapr_tce_table *stt,
+		struct iommu_table *tbl, unsigned long entry)
 {
-	unsigned long hpa = 0;
-	enum dma_data_direction dir = DMA_NONE;
+	unsigned long i;
+	unsigned long subpages = 1ULL << (stt->page_shift - tbl->it_page_shift);
+	unsigned long io_entry = entry << (stt->page_shift - tbl->it_page_shift);
+
+	for (i = 0; i < subpages; ++i) {
+		unsigned long hpa = 0;
+		enum dma_data_direction dir = DMA_NONE;
 
-	iommu_tce_xchg_no_kill(mm, tbl, entry, &hpa, &dir);
+		iommu_tce_xchg_no_kill(mm, tbl, io_entry + i, &hpa, &dir);
+	}
 }
 
 static long kvmppc_tce_iommu_mapped_dec(struct kvm *kvm,
@@ -486,6 +492,8 @@ static long kvmppc_tce_iommu_unmap(struct kvm *kvm,
 			break;
 	}
 
+	iommu_tce_kill(tbl, io_entry, subpages);
+
 	return ret;
 }
 
@@ -545,6 +553,8 @@ static long kvmppc_tce_iommu_map(struct kvm *kvm,
 			break;
 	}
 
+	iommu_tce_kill(tbl, io_entry, subpages);
+
 	return ret;
 }
 
@@ -591,10 +601,9 @@ long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 			ret = kvmppc_tce_iommu_map(vcpu->kvm, stt, stit->tbl,
 					entry, ua, dir);
 
-		iommu_tce_kill(stit->tbl, entry, 1);
 
 		if (ret != H_SUCCESS) {
-			kvmppc_clear_tce(vcpu->kvm->mm, stit->tbl, entry);
+			kvmppc_clear_tce(vcpu->kvm->mm, stt, stit->tbl, entry);
 			goto unlock_exit;
 		}
 	}
@@ -670,13 +679,13 @@ long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 		 */
 		if (get_user(tce, tces + i)) {
 			ret = H_TOO_HARD;
-			goto invalidate_exit;
+			goto unlock_exit;
 		}
 		tce = be64_to_cpu(tce);
 
 		if (kvmppc_tce_to_ua(vcpu->kvm, tce, &ua)) {
 			ret = H_PARAMETER;
-			goto invalidate_exit;
+			goto unlock_exit;
 		}
 
 		list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
@@ -685,19 +694,15 @@ long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 					iommu_tce_direction(tce));
 
 			if (ret != H_SUCCESS) {
-				kvmppc_clear_tce(vcpu->kvm->mm, stit->tbl,
-						entry);
-				goto invalidate_exit;
+				kvmppc_clear_tce(vcpu->kvm->mm, stt, stit->tbl,
+						 entry + i);
+				goto unlock_exit;
 			}
 		}
 
 		kvmppc_tce_put(stt, entry + i, tce);
 	}
 
-invalidate_exit:
-	list_for_each_entry_lockless(stit, &stt->iommu_tables, next)
-		iommu_tce_kill(stit->tbl, entry, npages);
-
 unlock_exit:
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 
@@ -736,20 +741,16 @@ long kvmppc_h_stuff_tce(struct kvm_vcpu *vcpu,
 				continue;
 
 			if (ret == H_TOO_HARD)
-				goto invalidate_exit;
+				return ret;
 
 			WARN_ON_ONCE(1);
-			kvmppc_clear_tce(vcpu->kvm->mm, stit->tbl, entry);
+			kvmppc_clear_tce(vcpu->kvm->mm, stt, stit->tbl, entry + i);
 		}
 	}
 
 	for (i = 0; i < npages; ++i, ioba += (1ULL << stt->page_shift))
 		kvmppc_tce_put(stt, ioba >> stt->page_shift, tce_value);
 
-invalidate_exit:
-	list_for_each_entry_lockless(stit, &stt->iommu_tables, next)
-		iommu_tce_kill(stit->tbl, ioba >> stt->page_shift, npages);
-
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kvmppc_h_stuff_tce);
arch/powerpc/kvm/book3s_64_vio_hv.c +22 -22

103 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#94 lore raw

PATCH 94/124 drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 3d0b93d92a2790337aa9d18cb332d02356a24126 ]

If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1.

Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync() fails, so use pm_runtime_resume_and_get() instead. this function will handle this.

---
 drivers/gpu/drm/vc4/vc4_dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_dsi.c +1 -1
index d09c1ea60c04..ca8506316660 100644
@@ -846,7 +846,7 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
 	unsigned long phy_clock;
 	int ret;
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret) {
 		DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->variant->port);
 		return;
Signature · 1 line
2.35.1
author maintainer
#95 lore raw

PATCH 95/124 powerpc/perf: Fix power9 event alternatives

In reply to Greg Kroah-Hartman

From: Athira Rajeev <[email protected]>

[ Upstream commit 0dcad700bb2776e3886fe0a645a4bf13b1e747cd ]

When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event.

By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power9 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative events.

To work with existing logic, fix the alternative event array to be sorted by column 0 for power9-pmu.c

Results:

With alternative events, multiplexing can be avoided. That is, for example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event, PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be programmed in a different PMC.

Before:

 # perf stat -e r3e054,r300fc

Performance counter stats for 'system wide':

           1057860      r3e054              (50.21%)
               379      r300fc              (49.79%)
       0.944329741 seconds time elapsed

Since both the events are using PMC3 in this case, they are multiplexed here.

After:

 # perf stat -e r3e054,r300fc

Performance counter stats for 'system wide':

           1006948      r3e054
               182      r300fc
Fixes 91e0bd1e6251 ("powerpc/perf: Add PM_LD_MISS_L1 and PM_BR_2PATH to power9 event list")
---
 arch/powerpc/perf/power9-pmu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/perf/power9-pmu.c +4 -4
index ff3382140d7e..cbdd074ee2a7 100644
@@ -133,11 +133,11 @@ int p9_dd22_bl_ev[] = {
 
 /* Table of alternatives, sorted by column 0 */
 static const unsigned int power9_event_alternatives[][MAX_ALT] = {
-	{ PM_INST_DISP,			PM_INST_DISP_ALT },
-	{ PM_RUN_CYC_ALT,		PM_RUN_CYC },
-	{ PM_RUN_INST_CMPL_ALT,		PM_RUN_INST_CMPL },
-	{ PM_LD_MISS_L1,		PM_LD_MISS_L1_ALT },
 	{ PM_BR_2PATH,			PM_BR_2PATH_ALT },
+	{ PM_INST_DISP,			PM_INST_DISP_ALT },
+	{ PM_RUN_CYC_ALT,               PM_RUN_CYC },
+	{ PM_LD_MISS_L1,                PM_LD_MISS_L1_ALT },
+	{ PM_RUN_INST_CMPL_ALT,         PM_RUN_INST_CMPL },
 };
 
 static int power9_get_alternatives(u64 event, unsigned int flags, u64 alt[])
Signature · 1 line
2.35.1
author maintainer
#96 lore raw

PATCH 96/124 powerpc/perf: Fix power10 event alternatives

In reply to Greg Kroah-Hartman

From: Athira Rajeev <[email protected]>

[ Upstream commit c6cc9a852f123301d5271f1484df8e961b2b64f1 ]

When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event.

By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power10 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative event.

To work with existing logic, fix the alternative event array to be sorted by column 0 for power10-pmu.c

Results:

In case where an alternative event is not chosen when we could, events will be multiplexed. ie, time sliced where it could actually run concurrently.

Example, in power10 PM_INST_CMPL_ALT(0x00002) has alternative event, PM_INST_CMPL(0x500fa). Without the fix, if a group of events with PMC1 to PMC4 is used along with PM_INST_CMPL_ALT, it will be time sliced since all programmable PMC's are consumed already. But with the fix, when it picks alternative event on PMC5, all events will run concurrently.

Before:

 # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc

Performance counter stats for 'system wide':

         328668935      r00002               (79.94%)
          56501024      r100fc               (79.95%)
          49564238      r200fa               (79.95%)
               376      r300fc               (80.19%)
               660      r400fc               (79.97%)
       4.039150522 seconds time elapsed

With the fix, since alternative event is chosen to run on PMC6, events will be run concurrently.

After:

 # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc

Performance counter stats for 'system wide':

          23596607      r00002
           4907738      r100fc
           2283608      r200fa
               135      r300fc
               248      r400fc
       1.664671390 seconds time elapsed
Fixes a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
---
 arch/powerpc/perf/power10-pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/perf/power10-pmu.c +1 -1
index 9dd75f385837..07ca62d084d9 100644
@@ -91,8 +91,8 @@ extern u64 PERF_REG_EXTENDED_MASK;
 
 /* Table of alternatives, sorted by column 0 */
 static const unsigned int power10_event_alternatives[][MAX_ALT] = {
-	{ PM_CYC_ALT,			PM_CYC },
 	{ PM_INST_CMPL_ALT,		PM_INST_CMPL },
+	{ PM_CYC_ALT,			PM_CYC },
 };
 
 static int power10_get_alternatives(u64 event, unsigned int flags, u64 alt[])
Signature · 1 line
2.35.1
author maintainer
#97 lore raw

PATCH 97/124 perf script: Always allow field data_src for auxtrace

In reply to Greg Kroah-Hartman

From: Leo Yan <[email protected]>

[ Upstream commit c6d8df01064333dcf140eda996abdb60a60e24b3 ]

If use command 'perf script -F,+data_src' to dump memory samples with Arm SPE trace data, it reports error:

  # perf script -F,+data_src
  Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample type, so if a file contains AUX area tracing data then always allow field 'data_src' to be selected as an option for perf script.

Fixes e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc German Gomez <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Clark <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Leo Yan <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/builtin-script.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-script.c +1 -1
index 18b56256bb6f..cb3d81adf5ca 100644
@@ -455,7 +455,7 @@ static int evsel__check_attr(struct evsel *evsel, struct perf_session *session)
 		return -EINVAL;
 
 	if (PRINT_FIELD(DATA_SRC) &&
-	    evsel__check_stype(evsel, PERF_SAMPLE_DATA_SRC, "DATA_SRC", PERF_OUTPUT_DATA_SRC))
+	    evsel__do_check_stype(evsel, PERF_SAMPLE_DATA_SRC, "DATA_SRC", PERF_OUTPUT_DATA_SRC, allow_user_set))
 		return -EINVAL;
 
 	if (PRINT_FIELD(WEIGHT) &&
Signature · 1 line
2.35.1
author maintainer
#98 lore raw

PATCH 98/124 perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event

In reply to Greg Kroah-Hartman

From: Leo Yan <[email protected]>

[ Upstream commit ccb17caecfbd542f49a2a79ae088136ba8bfb794 ]

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample type.

The commit ffab487052054162 ("perf: arm-spe: Fix perf report --mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC bit for Arm SPE event, this allows the perf data file generated by kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility for a data file recorded by an older version's perf which contains Arm SPE trace data. This patch is a workaround in reporting phase, when detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will force to set the bit in the sample type and give a warning info.

Fixes bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Cc Alexander Shishkin <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ravi Bangoria <[email protected]>
---
 tools/perf/builtin-report.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
tools/perf/builtin-report.c +14 -0
index 997e0a4b0902..6583ad9cc7de 100644
@@ -349,6 +349,7 @@ static int report__setup_sample_type(struct report *rep)
 	struct perf_session *session = rep->session;
 	u64 sample_type = evlist__combined_sample_type(session->evlist);
 	bool is_pipe = perf_data__is_pipe(session->data);
+	struct evsel *evsel;
 
 	if (session->itrace_synth_opts->callchain ||
 	    session->itrace_synth_opts->add_callchain ||
@@ -403,6 +404,19 @@ static int report__setup_sample_type(struct report *rep)
 	}
 
 	if (sort__mode == SORT_MODE__MEMORY) {
+		/*
+		 * FIXUP: prior to kernel 5.18, Arm SPE missed to set
+		 * PERF_SAMPLE_DATA_SRC bit in sample type.  For backward
+		 * compatibility, set the bit if it's an old perf data file.
+		 */
+		evlist__for_each_entry(session->evlist, evsel) {
+			if (strstr(evsel->name, "arm_spe") &&
+				!(sample_type & PERF_SAMPLE_DATA_SRC)) {
+				evsel->core.attr.sample_type |= PERF_SAMPLE_DATA_SRC;
+				sample_type |= PERF_SAMPLE_DATA_SRC;
+			}
+		}
+
 		if (!is_pipe && !(sample_type & PERF_SAMPLE_DATA_SRC)) {
 			ui__error("Selected --mem-mode but no mem data. "
 				  "Did you call perf record without -d?\n");
Signature · 1 line
2.35.1
author maintainer
#99 lore raw

PATCH 99/124 xtensa: patch_text: Fixup last cpu should be master

In reply to Greg Kroah-Hartman

From: Guo Ren <[email protected]>

commit ee69d4be8fd064cd08270b4808d2dfece3614ee0 upstream.

These patch_text implementations are using stop_machine_cpuslocked infrastructure with atomic cpu_count. The original idea: When the master CPU patch_text, the others should wait for it. But current implementation is using the first CPU as master, which couldn't guarantee the remaining CPUs are waiting. This patch changes the last CPU as the master to solve the potential risk.

Fixes 64711f9a47d4 ("xtensa: implement jump_label support")

Message-Id: <[email protected]>

---
 arch/xtensa/kernel/jump_label.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/xtensa/kernel/jump_label.c +1 -1
@@ -40,7 +40,7 @@ static int patch_text_stop_machine(void
 {
 	struct patch *patch = data;
 
-	if (atomic_inc_return(&patch->cpu_count) == 1) {
+	if (atomic_inc_return(&patch->cpu_count) == num_online_cpus()) {
 		local_patch_text(patch->addr, patch->data, patch->sz);
 		atomic_inc(&patch->cpu_count);
 	} else {
author maintainer
#100 lore raw

PATCH 100/124 xtensa: fix a7 clobbering in coprocessor context load/store

In reply to Greg Kroah-Hartman

From: Max Filippov <[email protected]>

commit 839769c35477d4acc2369e45000ca7b0b6af39a7 upstream.

Fast coprocessor exception handler saves a3..a6, but coprocessor context load/store code uses a4..a7 as temporaries, potentially clobbering a7. 'Potentially' because coprocessor state load/store macros may not use all four temporary registers (and neither FPU nor HiFi macros do). Use a3..a6 as intended.

Fixes c658eac628aa ("[XTENSA] Add support for configurable registers and coprocessors")
---
 arch/xtensa/kernel/coprocessor.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/xtensa/kernel/coprocessor.S +2 -2
@@ -29,7 +29,7 @@
 	.if XTENSA_HAVE_COPROCESSOR(x);					\
 		.align 4;						\
 	.Lsave_cp_regs_cp##x:						\
-		xchal_cp##x##_store a2 a4 a5 a6 a7;			\
+		xchal_cp##x##_store a2 a3 a4 a5 a6;			\
 		jx	a0;						\
 	.endif
 
@@ -46,7 +46,7 @@
 	.if XTENSA_HAVE_COPROCESSOR(x);					\
 		.align 4;						\
 	.Lload_cp_regs_cp##x:						\
-		xchal_cp##x##_load a2 a4 a5 a6 a7;			\
+		xchal_cp##x##_load a2 a3 a4 a5 a6;			\
 		jx	a0;						\
 	.endif
 
author maintainer
#101 lore raw

PATCH 101/124 openvswitch: fix OOB access in reserve_sfa_size()

In reply to Greg Kroah-Hartman

From: Paolo Valerio <[email protected]>

commit cefa91b2332d7009bc0be5d951d6cbbf349f90f8 upstream.

Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================

BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x45/0x5a
 print_report.cold+0x5e/0x5db
 ? __lock_text_start+0x8/0x8
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_report+0xb5/0x130
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_check_range+0xf5/0x1d0
 memcpy+0x39/0x60
 reserve_sfa_size+0x1ba/0x380 [openvswitch]
 __add_action+0x24/0x120 [openvswitch]
 ovs_nla_add_action+0xe/0x20 [openvswitch]
 ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x56/0xa0
 ? create_prof_cpu_mask+0x20/0x20
 ? ovs_ct_verify+0xf0/0xf0 [openvswitch]
 ? prep_compound_page+0x198/0x2a0
 ? __kasan_check_byte+0x10/0x40
 ? kasan_unpoison+0x40/0x70
 ? ksize+0x44/0x60
 ? reserve_sfa_size+0x75/0x380 [openvswitch]
 __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
 ? __zone_watermark_ok+0x420/0x420
 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
 ? __alloc_pages+0x1a9/0x3e0
 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
 ? unwind_next_frame+0x991/0x1e40
 ? __mod_node_page_state+0x99/0x120
 ? __mod_lruvec_page_state+0x2e3/0x470
 ? __kasan_kmalloc_large+0x90/0xe0
 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
 ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
 ...
Fixes f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
---
 net/openvswitch/flow_netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/openvswitch/flow_netlink.c +1 -1
@@ -2436,7 +2436,7 @@ static struct nlattr *reserve_sfa_size(s
 	new_acts_size = max(next_offset + req_size, ksize(*sfa) * 2);
 
 	if (new_acts_size > MAX_ACTIONS_BUFSIZE) {
-		if ((MAX_ACTIONS_BUFSIZE - next_offset) < req_size) {
+		if ((next_offset + req_size) > MAX_ACTIONS_BUFSIZE) {
 			OVS_NLERR(log, "Flow action size exceeds max %u",
 				  MAX_ACTIONS_BUFSIZE);
 			return ERR_PTR(-EMSGSIZE);
author maintainer
#102 lore raw

PATCH 102/124 gpio: Request interrupts after IRQ is initialized

In reply to Greg Kroah-Hartman

From: Mario Limonciello <[email protected]>

commit 06fb4ecfeac7e00d6704fa5ed19299f2fefb3cc9 upstream.

Commit 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization") attempted to fix a race condition that lead to a NULL pointer, but in the process caused a regression for _AEI/_EVT declared GPIOs.

This manifests in messages showing deferred probing while trying to allocate IRQs like so:

amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517 amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517 amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517 [ .. more of the same .. ]

The code for walking _AEI doesn't handle deferred probing and so this leads to non-functional GPIO interrupts.

Fix this issue by moving the call to acpi_gpiochip_request_interrupts to occur after gc->irc.initialized is set.

---
 drivers/gpio/gpiolib.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpio/gpiolib.c +2 -2
@@ -1560,8 +1560,6 @@ static int gpiochip_add_irqchip(struct g
 
 	gpiochip_set_irq_hooks(gc);
 
-	acpi_gpiochip_request_interrupts(gc);
-
 	/*
 	 * Using barrier() here to prevent compiler from reordering
 	 * gc->irq.initialized before initialization of above
@@ -1571,6 +1569,8 @@ static int gpiochip_add_irqchip(struct g
 
 	gc->irq.initialized = true;
 
+	acpi_gpiochip_request_interrupts(gc);
+
 	return 0;
 }
 
author maintainer
#103 lore raw

PATCH 103/124 ASoC: soc-dapm: fix two incorrect uses of list iterator

In reply to Greg Kroah-Hartman

From: Xiaomeng Tong <[email protected]>

commit f730a46b931d894816af34a0ff8e4ad51565b39f upstream.

These two bug are here:

	list_for_each_entry_safe_continue(w, n, list,
					power_list);
	list_for_each_entry_safe_continue(w, n, list,
					power_list);

After the list_for_each_entry_safe_continue() exits, the list iterator will always be a bogus pointer which point to an invalid struct objdect containing HEAD member. The funciton poniter 'w->event' will be a invalid value which can lead to a control-flow hijack if the 'w' can be controlled.

The original intention was to continue the outer list_for_each_entry_safe() loop with the same entry if w->event is NULL, but misunderstanding the meaning of list_for_each_entry_safe_continue().

So just add a 'continue;' to fix the bug.

---
 sound/soc/soc-dapm.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
sound/soc/soc-dapm.c +2 -4
@@ -1685,8 +1685,7 @@ static void dapm_seq_run(struct snd_soc_
 		switch (w->id) {
 		case snd_soc_dapm_pre:
 			if (!w->event)
-				list_for_each_entry_safe_continue(w, n, list,
-								  power_list);
+				continue;
 
 			if (event == SND_SOC_DAPM_STREAM_START)
 				ret = w->event(w,
@@ -1698,8 +1697,7 @@ static void dapm_seq_run(struct snd_soc_
 
 		case snd_soc_dapm_post:
 			if (!w->event)
-				list_for_each_entry_safe_continue(w, n, list,
-								  power_list);
+				continue;
 
 			if (event == SND_SOC_DAPM_STREAM_START)
 				ret = w->event(w,
author maintainer
#104 lore raw

PATCH 104/124 e1000e: Fix possible overflow in LTR decoding

In reply to Greg Kroah-Hartman

From: Sasha Neftin <[email protected]>

commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream.

When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation.

Scaling is represented as:

scale 0 - 1         (2^(5*0)) = 2^0
scale 1 - 32        (2^(5 *1))= 2^5
scale 2 - 1024      (2^(5 *2)) =2^10
scale 3 - 32768     (2^(5 *3)) =2^15
scale 4 - 1048576   (2^(5 *4)) = 2^20
scale 5 - 33554432  (2^(5 *4)) = 2^25

scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved.

Replace the u16 type with the u32 type and allow corrected LTR representation.

---
 drivers/net/ethernet/intel/e1000e/ich8lan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/e1000e/ich8lan.c +2 -2
@@ -1009,8 +1009,8 @@ static s32 e1000_platform_pm_pch_lpt(str
 {
 	u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
 	    link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
-	u16 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
-	u16 lat_enc_d = 0;	/* latency decoded */
+	u32 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
+	u32 lat_enc_d = 0;	/* latency decoded */
 	u16 lat_enc = 0;	/* latency encoded */
 
 	if (link) {
author maintainer
#105 lore raw

PATCH 105/124 ARC: entry: fix syscall_trace_exit argument

In reply to Greg Kroah-Hartman

From: Sergey Matyukevich <[email protected]>

commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream.

Function syscall_trace_exit expects pointer to pt_regs. However r0 is also used to keep syscall return value. Restore pointer to pt_regs before calling syscall_trace_exit.

---
 arch/arc/kernel/entry.S |    1 +
 1 file changed, 1 insertion(+)
arch/arc/kernel/entry.S +1 -0
@@ -196,6 +196,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
author maintainer
#106 lore raw

PATCH 106/124 arm_pmu: Validate single/group leader events

In reply to Greg Kroah-Hartman

From: Rob Herring <[email protected]>

commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream.

In the case where there is only a cycle counter available (i.e. PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open should fail as the event can never possibly be scheduled. However, the event validation when an event is opened is skipped when the group leader is opened. Fix this by always validating the group leader events.

---
 drivers/perf/arm_pmu.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/perf/arm_pmu.c +4 -6
@@ -398,6 +398,9 @@ validate_group(struct perf_event *event)
 	if (!validate_event(event->pmu, &fake_pmu, leader))
 		return -EINVAL;
 
+	if (event == leader)
+		return 0;
+
 	for_each_sibling_event(sibling, leader) {
 		if (!validate_event(event->pmu, &fake_pmu, sibling))
 			return -EINVAL;
@@ -487,12 +490,7 @@ __hw_perf_event_init(struct perf_event *
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
-	if (event->group_leader != event) {
-		if (validate_group(event) != 0)
-			return -EINVAL;
-	}
-
-	return 0;
+	return validate_group(event);
 }
 
 static int armpmu_event_init(struct perf_event *event)
author maintainer
#107 lore raw

PATCH 107/124 KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

In reply to Greg Kroah-Hartman

From: Like Xu <[email protected]>

commit 75189d1de1b377e580ebd2d2c55914631eac9c64 upstream.

NMI-watchdog is one of the favorite features of kernel developers, but it does not work in AMD guest even with vPMU enabled and worse, the system misrepresents this capability via /proc.

This is a PMC emulation error. KVM does not pass the latest valid value to perf_event in time when guest NMI-watchdog is running, thus the perf_event corresponding to the watchdog counter will enter the old state at some point after the first guest NMI injection, forcing the hardware register PMC0 to be constantly written to 0x800000000001.

Meanwhile, the running counter should accurately reflect its new value based on the latest coordinated pmc->counter (from vPMC's point of view) rather than the value written directly by the guest.

Fixes 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr")

Message-Id: <[email protected]>

---
 arch/x86/kvm/pmu.h           |    9 +++++++++
 arch/x86/kvm/svm/pmu.c       |    1 +
 arch/x86/kvm/vmx/pmu_intel.c |    8 ++------
 3 files changed, 12 insertions(+), 6 deletions(-)
arch/x86/kvm/pmu.h +9 -0
@@ -141,6 +141,15 @@ static inline u64 get_sample_period(stru
 	return sample_period;
 }
 
+static inline void pmc_update_sample_period(struct kvm_pmc *pmc)
+{
+	if (!pmc->perf_event || pmc->is_paused)
+		return;
+
+	perf_event_period(pmc->perf_event,
+			  get_sample_period(pmc, pmc->counter));
+}
+
 void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel);
 void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 ctrl, int fixed_idx);
 void reprogram_counter(struct kvm_pmu *pmu, int pmc_idx);
arch/x86/kvm/svm/pmu.c +1 -0
@@ -256,6 +256,7 @@ static int amd_pmu_set_msr(struct kvm_vc
 	pmc = get_gp_pmc_amd(pmu, msr, PMU_TYPE_COUNTER);
 	if (pmc) {
 		pmc->counter += data - pmc_read_counter(pmc);
+		pmc_update_sample_period(pmc);
 		return 0;
 	}
 	/* MSR_EVNTSELn */
arch/x86/kvm/vmx/pmu_intel.c +2 -6
@@ -439,15 +439,11 @@ static int intel_pmu_set_msr(struct kvm_
 			    !(msr & MSR_PMC_FULL_WIDTH_BIT))
 				data = (s64)(s32)data;
 			pmc->counter += data - pmc_read_counter(pmc);
-			if (pmc->perf_event && !pmc->is_paused)
-				perf_event_period(pmc->perf_event,
-						  get_sample_period(pmc, data));
+			pmc_update_sample_period(pmc);
 			return 0;
 		} else if ((pmc = get_fixed_pmc(pmu, msr))) {
 			pmc->counter += data - pmc_read_counter(pmc);
-			if (pmc->perf_event && !pmc->is_paused)
-				perf_event_period(pmc->perf_event,
-						  get_sample_period(pmc, data));
+			pmc_update_sample_period(pmc);
 			return 0;
 		} else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) {
 			if (data == pmc->eventsel)
author maintainer
#108 lore raw

PATCH 108/124 KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 423ecfea77dda83823c71b0fad1c2ddb2af1e5fc upstream.

Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check.

Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit.

  WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Modules linked in:
  CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
  RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Call Trace:
   <TASK>
   vcpu_run arch/x86/kvm/x86.c:10039 [inline]
   kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
   kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:874 [inline]
   __se_sys_ioctl fs/ioctl.c:860 [inline]
   __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG.

r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0)

Fixes 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation")
Cc Maxim Levitsky <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
arch/x86/kvm/x86.c +14 -1
@@ -10813,8 +10813,21 @@ int kvm_arch_vcpu_create(struct kvm_vcpu
 		r = kvm_create_lapic(vcpu, lapic_timer_advance_ns);
 		if (r < 0)
 			goto fail_mmu_destroy;
-		if (kvm_apicv_activated(vcpu->kvm))
+
+		/*
+		 * Defer evaluating inhibits until the vCPU is first run, as
+		 * this vCPU will not get notified of any changes until this
+		 * vCPU is visible to other vCPUs (marked online and added to
+		 * the set of vCPUs).  Opportunistically mark APICv active as
+		 * VMX in particularly is highly unlikely to have inhibits.
+		 * Ignore the current per-VM APICv state so that vCPU creation
+		 * is guaranteed to run with a deterministic value, the request
+		 * will ensure the vCPU gets the correct state before VM-Entry.
+		 */
+		if (enable_apicv) {
 			vcpu->arch.apicv_active = true;
+			kvm_make_request(KVM_REQ_APICV_UPDATE, vcpu);
+		}
 	} else
 		static_branch_inc(&kvm_has_noapic_vcpu);
 
author maintainer
#109 lore raw

PATCH 109/124 KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 7c69661e225cc484fbf44a0b99b56714a5241ae3 upstream.

Defer APICv updates that occur while L2 is active until nested VM-Exit, i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1 is active and (a) stomps all over vmcs02 and (b) neglects to ever updated vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv becomes unhibited while L2 is active, KVM will set various APICv controls in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless running with nested_early_check=1, KVM blames L1 and chaos ensues.

In all cases, ignoring vmcs02 and always deferring the inhibition change to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE inhibitions cannot truly change while L2 is active (see below).

IRQ_BLOCKING can change, but it is firmly a best effort debug feature. Furthermore, only L2's APIC is accelerated/virtualized to the full extent possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR interception will apply to the virtual APIC managed by KVM. The exception is the SELF_IPI register when x2APIC is enabled, but that's an acceptable hole.

Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the MSRs to L2, but for that to work in any sane capacity, L1 would need to pass through IRQs to L2 as well, and IRQs must be intercepted to enable virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling VID for L2 are, for all intents and purposes, mutually exclusive.

Lack of dynamic toggling is also why this scenario is all but impossible to encounter in KVM's current form. But a future patch will pend an APICv update request _during_ vCPU creation to plug a race where a vCPU that's being created doesn't get included in the "all vCPUs request" because it's not yet visible to other vCPUs. If userspaces restores L2 after VM creation (hello, KVM selftests), the first KVM_RUN will occur while L2 is active and thus service the APICv update request made during VM creation.

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.c |    5 +++++
 arch/x86/kvm/vmx/vmx.c    |    5 +++++
 arch/x86/kvm/vmx/vmx.h    |    1 +
 3 files changed, 11 insertions(+)
arch/x86/kvm/vmx/nested.c +5 -0
@@ -4601,6 +4601,11 @@ void nested_vmx_vmexit(struct kvm_vcpu *
 		kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 	}
 
+	if (vmx->nested.update_vmcs01_apicv_status) {
+		vmx->nested.update_vmcs01_apicv_status = false;
+		kvm_make_request(KVM_REQ_APICV_UPDATE, vcpu);
+	}
+
 	if ((vm_exit_reason != -1) &&
 	    (enable_shadow_vmcs || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)))
 		vmx->nested.need_vmcs12_to_shadow_sync = true;
arch/x86/kvm/vmx/vmx.c +5 -0
@@ -4098,6 +4098,11 @@ static void vmx_refresh_apicv_exec_ctrl(
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (is_guest_mode(vcpu)) {
+		vmx->nested.update_vmcs01_apicv_status = true;
+		return;
+	}
+
 	pin_controls_set(vmx, vmx_pin_based_exec_ctrl(vmx));
 	if (cpu_has_secondary_exec_ctrls()) {
 		if (kvm_vcpu_apicv_active(vcpu))
arch/x86/kvm/vmx/vmx.h +1 -0
@@ -164,6 +164,7 @@ struct nested_vmx {
 	bool change_vmcs01_virtual_apic_mode;
 	bool reload_vmcs01_apic_access_page;
 	bool update_vmcs01_cpu_dirty_logging;
+	bool update_vmcs01_apicv_status;
 
 	/*
 	 * Enlightened VMCS has been enabled. It does not mean that L1 has to
author maintainer
#110 lore raw

PATCH 110/124 KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

In reply to Greg Kroah-Hartman

From: Mingwei Zhang <[email protected]>

commit d45829b351ee6ec5f54dd55e6aca1f44fe239fe6 upstream.

Use clflush_cache_range() to flush the confidential memory when SME_COHERENT is supported in AMD CPU. Cache flush is still needed since SME_COHERENT only support cache invalidation at CPU side. All confidential cache lines are still incoherent with DMA devices.

Fixes add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")

Message-Id: <[email protected]>

---
 arch/x86/kvm/svm/sev.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
arch/x86/kvm/svm/sev.c +6 -3
@@ -1990,11 +1990,14 @@ static void sev_flush_guest_memory(struc
 				   unsigned long len)
 {
 	/*
-	 * If hardware enforced cache coherency for encrypted mappings of the
-	 * same physical page is supported, nothing to do.
+	 * If CPU enforced cache coherency for encrypted mappings of the
+	 * same physical page is supported, use CLFLUSHOPT instead. NOTE: cache
+	 * flush is still needed in order to work properly with DMA devices.
 	 */
-	if (boot_cpu_has(X86_FEATURE_SME_COHERENT))
+	if (boot_cpu_has(X86_FEATURE_SME_COHERENT)) {
+		clflush_cache_range(va, PAGE_SIZE);
 		return;
+	}
 
 	/*
 	 * If the VM Page Flush MSR is supported, use it to flush the page
author maintainer
#111 lore raw

PATCH 111/124 netfilter: conntrack: convert to refcount_t api

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 719774377622bc4025d2a74f551b5dc2158c6c30 upstream.

Convert nf_conn reference counting from atomic_t to refcount_t based api. refcount_t api provides more runtime sanity checks and will warn on certain constructs, e.g. refcount_inc() on a zero reference count, which usually indicates use-after-free.

For this reason template allocation is changed to init the refcount to 1, the subsequenct add operations are removed.

Likewise, init_conntrack() is changed to set the initial refcount to 1 instead refcount_inc().

This is safe because the new entry is not (yet) visible to other cpus.

---
 include/linux/netfilter/nf_conntrack_common.h |    8 ++++----
 net/netfilter/nf_conntrack_core.c             |   26 +++++++++++++-------------
 net/netfilter/nf_conntrack_expect.c           |    4 ++--
 net/netfilter/nf_conntrack_netlink.c          |    6 +++---
 net/netfilter/nf_conntrack_standalone.c       |    4 ++--
 net/netfilter/nf_flow_table_core.c            |    2 +-
 net/netfilter/nf_synproxy_core.c              |    1 -
 net/netfilter/nft_ct.c                        |    4 +---
 net/netfilter/xt_CT.c                         |    3 +--
 net/openvswitch/conntrack.c                   |    1 -
 net/sched/act_ct.c                            |    1 -
 11 files changed, 27 insertions(+), 33 deletions(-)
include/linux/netfilter/nf_conntrack_common.h +4 -4
@@ -2,7 +2,7 @@
 #ifndef _NF_CONNTRACK_COMMON_H
 #define _NF_CONNTRACK_COMMON_H
 
-#include <linux/atomic.h>
+#include <linux/refcount.h>
 #include <uapi/linux/netfilter/nf_conntrack_common.h>
 
 struct ip_conntrack_stat {
@@ -25,19 +25,19 @@ struct ip_conntrack_stat {
 #define NFCT_PTRMASK	~(NFCT_INFOMASK)
 
 struct nf_conntrack {
-	atomic_t use;
+	refcount_t use;
 };
 
 void nf_conntrack_destroy(struct nf_conntrack *nfct);
 static inline void nf_conntrack_put(struct nf_conntrack *nfct)
 {
-	if (nfct && atomic_dec_and_test(&nfct->use))
+	if (nfct && refcount_dec_and_test(&nfct->use))
 		nf_conntrack_destroy(nfct);
 }
 static inline void nf_conntrack_get(struct nf_conntrack *nfct)
 {
 	if (nfct)
-		atomic_inc(&nfct->use);
+		refcount_inc(&nfct->use);
 }
 
 #endif /* _NF_CONNTRACK_COMMON_H */
net/netfilter/nf_conntrack_core.c +13 -13
@@ -598,7 +598,7 @@ struct nf_conn *nf_ct_tmpl_alloc(struct
 	tmpl->status = IPS_TEMPLATE;
 	write_pnet(&tmpl->ct_net, net);
 	nf_ct_zone_add(tmpl, zone);
-	atomic_set(&tmpl->ct_general.use, 0);
+	refcount_set(&tmpl->ct_general.use, 1);
 
 	return tmpl;
 }
@@ -631,7 +631,7 @@ destroy_conntrack(struct nf_conntrack *n
 	struct nf_conn *ct = (struct nf_conn *)nfct;
 
 	pr_debug("destroy_conntrack(%p)\n", ct);
-	WARN_ON(atomic_read(&nfct->use) != 0);
+	WARN_ON(refcount_read(&nfct->use) != 0);
 
 	if (unlikely(nf_ct_is_template(ct))) {
 		nf_ct_tmpl_free(ct);
@@ -755,7 +755,7 @@ nf_ct_match(const struct nf_conn *ct1, c
 /* caller must hold rcu readlock and none of the nf_conntrack_locks */
 static void nf_ct_gc_expired(struct nf_conn *ct)
 {
-	if (!atomic_inc_not_zero(&ct->ct_general.use))
+	if (!refcount_inc_not_zero(&ct->ct_general.use))
 		return;
 
 	if (nf_ct_should_gc(ct))
@@ -823,7 +823,7 @@ __nf_conntrack_find_get(struct net *net,
 		 * in, try to obtain a reference and re-check tuple
 		 */
 		ct = nf_ct_tuplehash_to_ctrack(h);
-		if (likely(atomic_inc_not_zero(&ct->ct_general.use))) {
+		if (likely(refcount_inc_not_zero(&ct->ct_general.use))) {
 			if (likely(nf_ct_key_equal(h, tuple, zone, net)))
 				goto found;
 
@@ -920,7 +920,7 @@ nf_conntrack_hash_check_insert(struct nf
 
 	smp_wmb();
 	/* The caller holds a reference to this object */
-	atomic_set(&ct->ct_general.use, 2);
+	refcount_set(&ct->ct_general.use, 2);
 	__nf_conntrack_hash_insert(ct, hash, reply_hash);
 	nf_conntrack_double_unlock(hash, reply_hash);
 	NF_CT_STAT_INC(net, insert);
@@ -971,7 +971,7 @@ static void __nf_conntrack_insert_prepar
 {
 	struct nf_conn_tstamp *tstamp;
 
-	atomic_inc(&ct->ct_general.use);
+	refcount_inc(&ct->ct_general.use);
 	ct->status |= IPS_CONFIRMED;
 
 	/* set conntrack timestamp, if enabled. */
@@ -1364,7 +1364,7 @@ static unsigned int early_drop_list(stru
 		    nf_ct_is_dying(tmp))
 			continue;
 
-		if (!atomic_inc_not_zero(&tmp->ct_general.use))
+		if (!refcount_inc_not_zero(&tmp->ct_general.use))
 			continue;
 
 		/* kill only if still in same netns -- might have moved due to
@@ -1513,7 +1513,7 @@ static void gc_worker(struct work_struct
 				continue;
 
 			/* need to take reference to avoid possible races */
-			if (!atomic_inc_not_zero(&tmp->ct_general.use))
+			if (!refcount_inc_not_zero(&tmp->ct_general.use))
 				continue;
 
 			if (gc_worker_skip_ct(tmp)) {
@@ -1622,7 +1622,7 @@ __nf_conntrack_alloc(struct net *net,
 	/* Because we use RCU lookups, we set ct_general.use to zero before
 	 * this is inserted in any list.
 	 */
-	atomic_set(&ct->ct_general.use, 0);
+	refcount_set(&ct->ct_general.use, 0);
 	return ct;
 out:
 	atomic_dec(&cnet->count);
@@ -1647,7 +1647,7 @@ void nf_conntrack_free(struct nf_conn *c
 	/* A freed object has refcnt == 0, that's
 	 * the golden rule for SLAB_TYPESAFE_BY_RCU
 	 */
-	WARN_ON(atomic_read(&ct->ct_general.use) != 0);
+	WARN_ON(refcount_read(&ct->ct_general.use) != 0);
 
 	nf_ct_ext_destroy(ct);
 	kmem_cache_free(nf_conntrack_cachep, ct);
@@ -1739,8 +1739,8 @@ init_conntrack(struct net *net, struct n
 	if (!exp)
 		__nf_ct_try_assign_helper(ct, tmpl, GFP_ATOMIC);
 
-	/* Now it is inserted into the unconfirmed list, bump refcount */
-	nf_conntrack_get(&ct->ct_general);
+	/* Now it is inserted into the unconfirmed list, set refcount to 1. */
+	refcount_set(&ct->ct_general.use, 1);
 	nf_ct_add_to_unconfirmed_list(ct);
 
 	local_bh_enable();
@@ -2352,7 +2352,7 @@ get_next_corpse(int (*iter)(struct nf_co
 
 	return NULL;
 found:
-	atomic_inc(&ct->ct_general.use);
+	refcount_inc(&ct->ct_general.use);
 	spin_unlock(lockp);
 	local_bh_enable();
 	return ct;
net/netfilter/nf_conntrack_expect.c +2 -2
@@ -203,12 +203,12 @@ nf_ct_find_expectation(struct net *net,
 	 * about to invoke ->destroy(), or nf_ct_delete() via timeout
 	 * or early_drop().
 	 *
-	 * The atomic_inc_not_zero() check tells:  If that fails, we
+	 * The refcount_inc_not_zero() check tells:  If that fails, we
 	 * know that the ct is being destroyed.  If it succeeds, we
 	 * can be sure the ct cannot disappear underneath.
 	 */
 	if (unlikely(nf_ct_is_dying(exp->master) ||
-		     !atomic_inc_not_zero(&exp->master->ct_general.use)))
+		     !refcount_inc_not_zero(&exp->master->ct_general.use)))
 		return NULL;
 
 	if (exp->flags & NF_CT_EXPECT_PERMANENT) {
net/netfilter/nf_conntrack_netlink.c +3 -3
@@ -508,7 +508,7 @@ nla_put_failure:
 
 static int ctnetlink_dump_use(struct sk_buff *skb, const struct nf_conn *ct)
 {
-	if (nla_put_be32(skb, CTA_USE, htonl(atomic_read(&ct->ct_general.use))))
+	if (nla_put_be32(skb, CTA_USE, htonl(refcount_read(&ct->ct_general.use))))
 		goto nla_put_failure;
 	return 0;
 
@@ -1200,7 +1200,7 @@ restart:
 			ct = nf_ct_tuplehash_to_ctrack(h);
 			if (nf_ct_is_expired(ct)) {
 				if (i < ARRAY_SIZE(nf_ct_evict) &&
-				    atomic_inc_not_zero(&ct->ct_general.use))
+				    refcount_inc_not_zero(&ct->ct_general.use))
 					nf_ct_evict[i++] = ct;
 				continue;
 			}
@@ -1748,7 +1748,7 @@ restart:
 						  NFNL_MSG_TYPE(cb->nlh->nlmsg_type),
 						  ct, dying ? true : false, 0);
 			if (res < 0) {
-				if (!atomic_inc_not_zero(&ct->ct_general.use))
+				if (!refcount_inc_not_zero(&ct->ct_general.use))
 					continue;
 				cb->args[0] = cpu;
 				cb->args[1] = (unsigned long)ct;
net/netfilter/nf_conntrack_standalone.c +2 -2
@@ -303,7 +303,7 @@ static int ct_seq_show(struct seq_file *
 	int ret = 0;
 
 	WARN_ON(!ct);
-	if (unlikely(!atomic_inc_not_zero(&ct->ct_general.use)))
+	if (unlikely(!refcount_inc_not_zero(&ct->ct_general.use)))
 		return 0;
 
 	if (nf_ct_should_gc(ct)) {
@@ -370,7 +370,7 @@ static int ct_seq_show(struct seq_file *
 	ct_show_zone(s, ct, NF_CT_DEFAULT_ZONE_DIR);
 	ct_show_delta_time(s, ct);
 
-	seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use));
+	seq_printf(s, "use=%u\n", refcount_read(&ct->ct_general.use));
 
 	if (seq_has_overflowed(s))
 		goto release;
net/netfilter/nf_flow_table_core.c +1 -1
@@ -48,7 +48,7 @@ struct flow_offload *flow_offload_alloc(
 	struct flow_offload *flow;
 
 	if (unlikely(nf_ct_is_dying(ct) ||
-	    !atomic_inc_not_zero(&ct->ct_general.use)))
+	    !refcount_inc_not_zero(&ct->ct_general.use)))
 		return NULL;
 
 	flow = kzalloc(sizeof(*flow), GFP_ATOMIC);
net/netfilter/nf_synproxy_core.c +0 -1
@@ -349,7 +349,6 @@ static int __net_init synproxy_net_init(
 		goto err2;
 
 	__set_bit(IPS_CONFIRMED_BIT, &ct->status);
-	nf_conntrack_get(&ct->ct_general);
 	snet->tmpl = ct;
 
 	snet->stats = alloc_percpu(struct synproxy_stats);
net/netfilter/nft_ct.c +1 -3
@@ -259,7 +259,7 @@ static void nft_ct_set_zone_eval(const s
 
 	ct = this_cpu_read(nft_ct_pcpu_template);
 
-	if (likely(atomic_read(&ct->ct_general.use) == 1)) {
+	if (likely(refcount_read(&ct->ct_general.use) == 1)) {
 		nf_ct_zone_add(ct, &zone);
 	} else {
 		/* previous skb got queued to userspace */
@@ -270,7 +270,6 @@ static void nft_ct_set_zone_eval(const s
 		}
 	}
 
-	atomic_inc(&ct->ct_general.use);
 	nf_ct_set(skb, ct, IP_CT_NEW);
 }
 #endif
@@ -375,7 +374,6 @@ static bool nft_ct_tmpl_alloc_pcpu(void)
 			return false;
 		}
 
-		atomic_set(&tmp->ct_general.use, 1);
 		per_cpu(nft_ct_pcpu_template, cpu) = tmp;
 	}
 
net/netfilter/xt_CT.c +1 -2
@@ -24,7 +24,7 @@ static inline int xt_ct_target(struct sk
 		return XT_CONTINUE;
 
 	if (ct) {
-		atomic_inc(&ct->ct_general.use);
+		refcount_inc(&ct->ct_general.use);
 		nf_ct_set(skb, ct, IP_CT_NEW);
 	} else {
 		nf_ct_set(skb, ct, IP_CT_UNTRACKED);
@@ -201,7 +201,6 @@ static int xt_ct_tg_check(const struct x
 			goto err4;
 	}
 	__set_bit(IPS_CONFIRMED_BIT, &ct->status);
-	nf_conntrack_get(&ct->ct_general);
 out:
 	info->ct = ct;
 	return 0;
net/openvswitch/conntrack.c +0 -1
@@ -1722,7 +1722,6 @@ int ovs_ct_copy_action(struct net *net,
 		goto err_free_ct;
 
 	__set_bit(IPS_CONFIRMED_BIT, &ct_info.ct->status);
-	nf_conntrack_get(&ct_info.ct->ct_general);
 	return 0;
 err_free_ct:
 	__ovs_ct_free_action(&ct_info);
net/sched/act_ct.c +0 -1
@@ -1232,7 +1232,6 @@ static int tcf_ct_fill_params(struct net
 		return -ENOMEM;
 	}
 	__set_bit(IPS_CONFIRMED_BIT, &tmpl->status);
-	nf_conntrack_get(&tmpl->ct_general);
 	p->tmpl = tmpl;
 
 	return 0;
author maintainer
#112 lore raw

PATCH 112/124 netfilter: conntrack: avoid useless indirection during conntrack destruction

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 6ae7989c9af0d98ab64196f4f4c6f6499454bd23 upstream.

nf_ct_put() results in a usesless indirection:

nf_ct_put -> nf_conntrack_put -> nf_conntrack_destroy -> rcu readlock + indirect call of ct_hooks->destroy().

There are two _put helpers:
nf_ct_put and nf_conntrack_put. The latter is what should be used in code that MUST NOT cause a linker dependency on the conntrack module (e.g. calls from core network stack).

Everyone else should call nf_ct_put() instead.

A followup patch will convert a few nf_conntrack_put() calls to nf_ct_put(), in particular from modules that already have a conntrack dependency such as act_ct or even nf_conntrack itself.

---
 include/linux/netfilter/nf_conntrack_common.h |    2 ++
 include/net/netfilter/nf_conntrack.h          |    8 ++++++--
 net/netfilter/nf_conntrack_core.c             |   12 ++++++------
 3 files changed, 14 insertions(+), 8 deletions(-)
include/linux/netfilter/nf_conntrack_common.h +2 -0
@@ -29,6 +29,8 @@ struct nf_conntrack {
 };
 
 void nf_conntrack_destroy(struct nf_conntrack *nfct);
+
+/* like nf_ct_put, but without module dependency on nf_conntrack */
 static inline void nf_conntrack_put(struct nf_conntrack *nfct)
 {
 	if (nfct && refcount_dec_and_test(&nfct->use))
include/net/netfilter/nf_conntrack.h +6 -2
@@ -76,6 +76,8 @@ struct nf_conn {
 	 * Hint, SKB address this struct and refcnt via skb->_nfct and
 	 * helpers nf_conntrack_get() and nf_conntrack_put().
 	 * Helper nf_ct_put() equals nf_conntrack_put() by dec refcnt,
+	 * except that the latter uses internal indirection and does not
+	 * result in a conntrack module dependency.
 	 * beware nf_ct_get() is different and don't inc refcnt.
 	 */
 	struct nf_conntrack ct_general;
@@ -169,11 +171,13 @@ nf_ct_get(const struct sk_buff *skb, enu
 	return (struct nf_conn *)(nfct & NFCT_PTRMASK);
 }
 
+void nf_ct_destroy(struct nf_conntrack *nfct);
+
 /* decrement reference count on a conntrack */
 static inline void nf_ct_put(struct nf_conn *ct)
 {
-	WARN_ON(!ct);
-	nf_conntrack_put(&ct->ct_general);
+	if (ct && refcount_dec_and_test(&ct->ct_general.use))
+		nf_ct_destroy(&ct->ct_general);
 }
 
 /* Protocol module loading */
net/netfilter/nf_conntrack_core.c +6 -6
@@ -571,7 +571,7 @@ static void nf_ct_del_from_dying_or_unco
 
 #define NFCT_ALIGN(len)	(((len) + NFCT_INFOMASK) & ~NFCT_INFOMASK)
 
-/* Released via destroy_conntrack() */
+/* Released via nf_ct_destroy() */
 struct nf_conn *nf_ct_tmpl_alloc(struct net *net,
 				 const struct nf_conntrack_zone *zone,
 				 gfp_t flags)
@@ -625,12 +625,11 @@ static void destroy_gre_conntrack(struct
 #endif
 }
 
-static void
-destroy_conntrack(struct nf_conntrack *nfct)
+void nf_ct_destroy(struct nf_conntrack *nfct)
 {
 	struct nf_conn *ct = (struct nf_conn *)nfct;
 
-	pr_debug("destroy_conntrack(%p)\n", ct);
+	pr_debug("%s(%p)\n", __func__, ct);
 	WARN_ON(refcount_read(&nfct->use) != 0);
 
 	if (unlikely(nf_ct_is_template(ct))) {
@@ -656,9 +655,10 @@ destroy_conntrack(struct nf_conntrack *n
 	if (ct->master)
 		nf_ct_put(ct->master);
 
-	pr_debug("destroy_conntrack: returning ct=%p to slab\n", ct);
+	pr_debug("%s: returning ct=%p to slab\n", __func__, ct);
 	nf_conntrack_free(ct);
 }
+EXPORT_SYMBOL(nf_ct_destroy);
 
 static void nf_ct_delete_from_lists(struct nf_conn *ct)
 {
@@ -2825,7 +2825,7 @@ err_cachep:
 
 static struct nf_ct_hook nf_conntrack_hook = {
 	.update		= nf_conntrack_update,
-	.destroy	= destroy_conntrack,
+	.destroy	= nf_ct_destroy,
 	.get_tuple_skb  = nf_conntrack_get_tuple_skb,
 };
 
author maintainer
#113 lore raw

PATCH 113/124 ext4: fix fallocate to use file_modified to update permissions consistently

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

commit ad5cd4f4ee4d5fcdb1bfb7a0c073072961e70783 upstream.

Since the initial introduction of (posix) fallocate back at the turn of the century, it has been possible to use this syscall to change the user-visible contents of files. This can happen by extending the file size during a preallocation, or through any of the newer modes (punch, zero, collapse, insert range). Because the call can be used to change file contents, we should treat it like we do any other modification to a file -- update the mtime, and drop set[ug]id privileges/capabilities.

The VFS function file_modified() does all this for us if pass it a locked inode, so let's make fallocate drop permissions correctly.

---
 fs/ext4/ext4.h    |    2 +-
 fs/ext4/extents.c |   32 +++++++++++++++++++++++++-------
 fs/ext4/inode.c   |    7 ++++++-
 3 files changed, 32 insertions(+), 9 deletions(-)
fs/ext4/ext4.h +1 -1
@@ -3027,7 +3027,7 @@ extern int ext4_inode_attach_jinode(stru
 extern int ext4_can_truncate(struct inode *inode);
 extern int ext4_truncate(struct inode *);
 extern int ext4_break_layouts(struct inode *);
-extern int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length);
+extern int ext4_punch_hole(struct file *file, loff_t offset, loff_t length);
 extern void ext4_set_inode_flags(struct inode *, bool init);
 extern int ext4_alloc_da_blocks(struct inode *inode);
 extern void ext4_set_aops(struct inode *inode);
fs/ext4/extents.c +25 -7
@@ -4504,9 +4504,9 @@ retry:
 	return ret > 0 ? ret2 : ret;
 }
 
-static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len);
+static int ext4_collapse_range(struct file *file, loff_t offset, loff_t len);
 
-static int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len);
+static int ext4_insert_range(struct file *file, loff_t offset, loff_t len);
 
 static long ext4_zero_range(struct file *file, loff_t offset,
 			    loff_t len, int mode)
@@ -4578,6 +4578,10 @@ static long ext4_zero_range(struct file
 	/* Wait all existing dio workers, newcomers will block on i_mutex */
 	inode_dio_wait(inode);
 
+	ret = file_modified(file);
+	if (ret)
+		goto out_mutex;
+
 	/* Preallocate the range including the unaligned edges */
 	if (partial_begin || partial_end) {
 		ret = ext4_alloc_file_blocks(file,
@@ -4696,7 +4700,7 @@ long ext4_fallocate(struct file *file, i
 	ext4_fc_start_update(inode);
 
 	if (mode & FALLOC_FL_PUNCH_HOLE) {
-		ret = ext4_punch_hole(inode, offset, len);
+		ret = ext4_punch_hole(file, offset, len);
 		goto exit;
 	}
 
@@ -4705,12 +4709,12 @@ long ext4_fallocate(struct file *file, i
 		goto exit;
 
 	if (mode & FALLOC_FL_COLLAPSE_RANGE) {
-		ret = ext4_collapse_range(inode, offset, len);
+		ret = ext4_collapse_range(file, offset, len);
 		goto exit;
 	}
 
 	if (mode & FALLOC_FL_INSERT_RANGE) {
-		ret = ext4_insert_range(inode, offset, len);
+		ret = ext4_insert_range(file, offset, len);
 		goto exit;
 	}
 
@@ -4746,6 +4750,10 @@ long ext4_fallocate(struct file *file, i
 	/* Wait all existing dio workers, newcomers will block on i_mutex */
 	inode_dio_wait(inode);
 
+	ret = file_modified(file);
+	if (ret)
+		goto out;
+
 	ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size, flags);
 	if (ret)
 		goto out;
@@ -5248,8 +5256,9 @@ out:
  * This implements the fallocate's collapse range functionality for ext4
  * Returns: 0 and non-zero on error.
  */
-static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len)
+static int ext4_collapse_range(struct file *file, loff_t offset, loff_t len)
 {
+	struct inode *inode = file_inode(file);
 	struct super_block *sb = inode->i_sb;
 	struct address_space *mapping = inode->i_mapping;
 	ext4_lblk_t punch_start, punch_stop;
@@ -5301,6 +5310,10 @@ static int ext4_collapse_range(struct in
 	/* Wait for existing dio to complete */
 	inode_dio_wait(inode);
 
+	ret = file_modified(file);
+	if (ret)
+		goto out_mutex;
+
 	/*
 	 * Prevent page faults from reinstantiating pages we have released from
 	 * page cache.
@@ -5394,8 +5407,9 @@ out_mutex:
  * by len bytes.
  * Returns 0 on success, error otherwise.
  */
-static int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len)
+static int ext4_insert_range(struct file *file, loff_t offset, loff_t len)
 {
+	struct inode *inode = file_inode(file);
 	struct super_block *sb = inode->i_sb;
 	struct address_space *mapping = inode->i_mapping;
 	handle_t *handle;
@@ -5452,6 +5466,10 @@ static int ext4_insert_range(struct inod
 	/* Wait for existing dio to complete */
 	inode_dio_wait(inode);
 
+	ret = file_modified(file);
+	if (ret)
+		goto out_mutex;
+
 	/*
 	 * Prevent page faults from reinstantiating pages we have released from
 	 * page cache.
fs/ext4/inode.c +6 -1
@@ -3939,8 +3939,9 @@ int ext4_break_layouts(struct inode *ino
  * Returns: 0 on success or negative on failure
  */
 
-int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
+int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
 {
+	struct inode *inode = file_inode(file);
 	struct super_block *sb = inode->i_sb;
 	ext4_lblk_t first_block, stop_block;
 	struct address_space *mapping = inode->i_mapping;
@@ -4002,6 +4003,10 @@ int ext4_punch_hole(struct inode *inode,
 	/* Wait all existing dio workers, newcomers will block on i_mutex */
 	inode_dio_wait(inode);
 
+	ret = file_modified(file);
+	if (ret)
+		goto out_mutex;
+
 	/*
 	 * Prevent page faults from reinstantiating pages we have released from
 	 * page cache.
author maintainer
#114 lore raw

PATCH 114/124 ext4: fix symlink file size not match to file content

In reply to Greg Kroah-Hartman

From: Ye Bin <[email protected]>

commit a2b0b205d125f27cddfb4f7280e39affdaf46686 upstream.

We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0). Fix? no

As the symlink file size does not match the file content. If the writeback of the symlink data block failed, ext4_finish_bio() handles the end of IO. However this function fails to mark the buffer with BH_write_io_error and so when unmount does journal checkpoint it cannot detect the writeback error and will cleanup the journal. Thus we've lost the correct data in the journal area. To solve this issue, mark the buffer as BH_write_io_error in ext4_finish_bio().

---
 fs/ext4/page-io.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/ext4/page-io.c +3 -1
@@ -134,8 +134,10 @@ static void ext4_finish_bio(struct bio *
 				continue;
 			}
 			clear_buffer_async_write(bh);
-			if (bio->bi_status)
+			if (bio->bi_status) {
+				set_buffer_write_io_error(bh);
 				buffer_io_error(bh);
+			}
 		} while ((bh = bh->b_this_page) != head);
 		spin_unlock_irqrestore(&head->b_uptodate_lock, flags);
 		if (!under_io) {
author maintainer
#115 lore raw

PATCH 115/124 ext4: fix use-after-free in ext4_search_dir

In reply to Greg Kroah-Hartman

From: Ye Bin <[email protected]>

commit c186f0887fe7061a35cebef024550ec33ef8fbd8 upstream.

We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
==================================================================

BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline]
BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline]
BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331

CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:83 [inline]
 dump_stack+0x144/0x187 lib/dump_stack.c:124
 print_address_description+0x7d/0x630 mm/kasan/report.c:387
 __kasan_report+0x132/0x190 mm/kasan/report.c:547
 kasan_report+0x47/0x60 mm/kasan/report.c:564
 ext4_search_dir fs/ext4/namei.c:1394 [inline]
 search_dirblock fs/ext4/namei.c:1199 [inline]
 __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
 ext4_lookup_entry fs/ext4/namei.c:1622 [inline]
 ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690
 __lookup_hash+0xc5/0x190 fs/namei.c:1451
 do_rmdir+0x19e/0x310 fs/namei.c:3760
 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x445e59
Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054
RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002
R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3
flags: 0x200000000000000()
raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
 ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

ext4_search_dir:
...
de = (struct ext4_dir_entry_2 *)search_buf;
dlimit = search_buf + buf_size;
while ((char *) de < dlimit) {
...

    if ((char *) de + de->name_len <= dlimit &&
	 ext4_match(dir, fname, de)) {
	    ...
    }
  ...
    de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize);
    if (de_len <= 0)
      return -1;
    offset += de_len;
    de = (struct ext4_dir_entry_2 *) ((char *) de + de_len);

}

Assume:
de=0xffff8881317c2fff
dlimit=0x0xffff8881317c3000

If read 'de->name_len' which address is 0xffff8881317c3005, obviously is out of range, then will trigger use-after-free.
To solve this issue, 'dlimit' must reserve 8 bytes, as we will read 'de->name_len' to judge if '(char *) de + de->name_len' out of range.

---
 fs/ext4/ext4.h  |    4 ++++
 fs/ext4/namei.c |    4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)
fs/ext4/ext4.h +4 -0
@@ -2267,6 +2267,10 @@ static inline int ext4_forced_shutdown(s
  * Structure of a directory entry
  */
 #define EXT4_NAME_LEN 255
+/*
+ * Base length of the ext4 directory entry excluding the name length
+ */
+#define EXT4_BASE_DIR_LEN (sizeof(struct ext4_dir_entry_2) - EXT4_NAME_LEN)
 
 struct ext4_dir_entry {
 	__le32	inode;			/* Inode number */
fs/ext4/namei.c +2 -2
@@ -1466,10 +1466,10 @@ int ext4_search_dir(struct buffer_head *
 
 	de = (struct ext4_dir_entry_2 *)search_buf;
 	dlimit = search_buf + buf_size;
-	while ((char *) de < dlimit) {
+	while ((char *) de < dlimit - EXT4_BASE_DIR_LEN) {
 		/* this code is executed quadratically often */
 		/* do minimal checking `by hand' */
-		if ((char *) de + de->name_len <= dlimit &&
+		if (de->name + de->name_len <= dlimit &&
 		    ext4_match(dir, fname, de)) {
 			/* found a match - just to be sure, do
 			 * a full check */
author maintainer
#116 lore raw

PATCH 116/124 ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

In reply to Greg Kroah-Hartman

From: Tadeusz Struk <[email protected]>

commit 2da376228a2427501feb9d15815a45dbdbdd753e upstream.

Syzbot found an issue [1] in ext4_fallocate().
The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul, and offset 0x1000000ul, which, when added together exceed the bitmap_maxbytes for the inode. This triggers a BUG in ext4_ind_remove_space(). According to the comments in this function the 'end' parameter needs to be one block after the last block to be removed. In the case when the BUG is triggered it points to the last block. Modify the ext4_punch_hole() function and add constraint that caps the length to satisfy the one before laster block requirement.

---
 fs/ext4/inode.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
fs/ext4/inode.c +10 -1
@@ -3945,7 +3945,8 @@ int ext4_punch_hole(struct file *file, l
 	struct super_block *sb = inode->i_sb;
 	ext4_lblk_t first_block, stop_block;
 	struct address_space *mapping = inode->i_mapping;
-	loff_t first_block_offset, last_block_offset;
+	loff_t first_block_offset, last_block_offset, max_length;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	handle_t *handle;
 	unsigned int credits;
 	int ret = 0, ret2 = 0;
@@ -3988,6 +3989,14 @@ int ext4_punch_hole(struct file *file, l
 		   offset;
 	}
 
+	/*
+	 * For punch hole the length + offset needs to be within one block
+	 * before last range. Adjust the length if it goes beyond that limit.
+	 */
+	max_length = sbi->s_bitmap_maxbytes - inode->i_sb->s_blocksize;
+	if (offset + length > max_length)
+		length = max_length - offset;
+
 	if (offset & (sb->s_blocksize - 1) ||
 	    (offset + length) & (sb->s_blocksize - 1)) {
 		/*
author maintainer
#117 lore raw

PATCH 117/124 ext4, doc: fix incorrect h_reserved size

In reply to Greg Kroah-Hartman

From: wangjianjian (C) <[email protected]>

commit 7102ffe4c166ca0f5e35137e9f9de83768c2d27d upstream.

According to document and code, ext4_xattr_header's size is 32 bytes, so h_reserved size should be 3.

---
 Documentation/filesystems/ext4/attributes.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/filesystems/ext4/attributes.rst +1 -1
@@ -76,7 +76,7 @@ The beginning of an extended attribute b
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
author maintainer
#118 lore raw

PATCH 118/124 ext4: fix overhead calculation to account for the reserved gdt blocks

In reply to Greg Kroah-Hartman

From: Theodore Ts'o <[email protected]>

commit 10b01ee92df52c8d7200afead4d5e5f55a5c58b1 upstream.

The kernel calculation was underestimating the overhead by not taking into account the reserved gdt blocks. With this change, the overhead calculated by the kernel matches the overhead calculation in mke2fs.

---
 fs/ext4/super.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/ext4/super.c +3 -1
@@ -3697,9 +3697,11 @@ static int count_overhead(struct super_b
 	ext4_fsblk_t		first_block, last_block, b;
 	ext4_group_t		i, ngroups = ext4_get_groups_count(sb);
 	int			s, j, count = 0;
+	int			has_super = ext4_bg_has_super(sb, grp);
 
 	if (!ext4_has_feature_bigalloc(sb))
-		return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) +
+		return (has_super + ext4_bg_num_gdb(sb, grp) +
+			(has_super ? le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0) +
 			sbi->s_itb_per_group + 2);
 
 	first_block = le32_to_cpu(sbi->s_es->s_first_data_block) +
author maintainer
#119 lore raw

PATCH 119/124 ext4: force overhead calculation if the s_overhead_cluster makes no sense

In reply to Greg Kroah-Hartman

From: Theodore Ts'o <[email protected]>

commit 85d825dbf4899a69407338bae462a59aa9a37326 upstream.

If the file system does not use bigalloc, calculating the overhead is cheap, so force the recalculation of the overhead so we don't have to trust the precalculated overhead in the superblock.

---
 fs/ext4/super.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
fs/ext4/super.c +12 -3
@@ -4788,9 +4788,18 @@ no_journal:
 	 * Get the # of file system overhead blocks from the
 	 * superblock if present.
 	 */
-	if (es->s_overhead_clusters)
-		sbi->s_overhead = le32_to_cpu(es->s_overhead_clusters);
-	else {
+	sbi->s_overhead = le32_to_cpu(es->s_overhead_clusters);
+	/* ignore the precalculated value if it is ridiculous */
+	if (sbi->s_overhead > ext4_blocks_count(es))
+		sbi->s_overhead = 0;
+	/*
+	 * If the bigalloc feature is not enabled recalculating the
+	 * overhead doesn't take long, so we might as well just redo
+	 * it to make sure we are using the correct value.
+	 */
+	if (!ext4_has_feature_bigalloc(sb))
+		sbi->s_overhead = 0;
+	if (sbi->s_overhead == 0) {
 		err = ext4_calculate_overhead(sb);
 		if (err)
 			goto failed_mount_wq;
author maintainer
#120 lore raw

PATCH 120/124 netfilter: nft_ct: fix use after free when attaching zone template

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 34243b9ec856309339172b1507379074156947e8 upstream.

The conversion erroneously removed the refcount increment. In case we can use the percpu template, we need to increment the refcount, else it will be released when the skb gets freed.

In case the slowpath is taken, the new template already has a refcount of 1.

Fixes 719774377622 ("netfilter: conntrack: convert to refcount_t api")
---
 net/netfilter/nft_ct.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/netfilter/nft_ct.c +4 -1
@@ -260,9 +260,12 @@ static void nft_ct_set_zone_eval(const s
 	ct = this_cpu_read(nft_ct_pcpu_template);
 
 	if (likely(refcount_read(&ct->ct_general.use) == 1)) {
+		refcount_inc(&ct->ct_general.use);
 		nf_ct_zone_add(ct, &zone);
 	} else {
-		/* previous skb got queued to userspace */
+		/* previous skb got queued to userspace, allocate temporary
+		 * one until percpu template can be reused.
+		 */
 		ct = nf_ct_tmpl_alloc(nft_net(pkt), &zone, GFP_ATOMIC);
 		if (!ct) {
 			regs->verdict.code = NF_DROP;
author maintainer
#121 lore raw

PATCH 121/124 jbd2: fix a potential race while discarding reserved buffers after an abort

In reply to Greg Kroah-Hartman

From: Ye Bin <[email protected]>

commit 23e3d7f7061f8682c751c46512718f47580ad8f0 upstream.

we got issue as follows:

[   72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
[   72.826847] EXT4-fs (sda): Remounting filesystem read-only
fallocate: fallocate failed: Read-only file system
[   74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
[   74.793597] ------------[ cut here ]------------
[   74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
[   74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
[   74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
[   74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
[   74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
[   74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
[   74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
[   74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
[   74.807301] FS:  0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
[   74.808338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
[   74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   74.811897] Call Trace:
[   74.812241]  <TASK>
[   74.812566]  __jbd2_journal_refile_buffer+0x12f/0x180
[   74.813246]  jbd2_journal_refile_buffer+0x4c/0xa0
[   74.813869]  jbd2_journal_commit_transaction.cold+0xa1/0x148
[   74.817550]  kjournald2+0xf8/0x3e0
[   74.819056]  kthread+0x153/0x1c0
[   74.819963]  ret_from_fork+0x22/0x30

Above issue may happen as follows:
write truncate kjournald2
generic_perform_write
ext4_write_begin
ext4_walk_page_buffers
do_journal_get_write_access ->add BJ_Reserved list
ext4_journalled_write_end
ext4_walk_page_buffers
write_end_fn

    ext4_handle_dirty_metadata
                ***************JBD2 ABORT**************
     jbd2_journal_dirty_metadata
 -> return -EROFS, jh in reserved_list
                                                   jbd2_journal_commit_transaction
                                                    while (commit_transaction->t_reserved_list)
                                                      jh = commit_transaction->t_reserved_list;
                        truncate_pagecache_range
                         do_invalidatepage
			  ext4_journalled_invalidatepage
			   jbd2_journal_invalidatepage
			    journal_unmap_buffer
			     __dispose_buffer
			      __jbd2_journal_unfile_buffer
			       jbd2_journal_put_journal_head ->put last ref_count
			        __journal_remove_journal_head
				 bh->b_private = NULL;
				 jh->b_bh = NULL;
				                      jbd2_journal_refile_buffer(journal, jh);
							bh = jh2bh(jh);
							->bh is NULL, later will trigger null-ptr-deref
				 journal_free_journal_head(jh);

After commit 96f1e0974575, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue.

Fixes 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
---
 fs/jbd2/commit.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/jbd2/commit.c +3 -1
@@ -501,7 +501,6 @@ void jbd2_journal_commit_transaction(jou
 	}
 	spin_unlock(&commit_transaction->t_handle_lock);
 	commit_transaction->t_state = T_SWITCH;
-	write_unlock(&journal->j_state_lock);
 
 	J_ASSERT (atomic_read(&commit_transaction->t_outstanding_credits) <=
 			journal->j_max_transaction_buffers);
@@ -521,6 +520,8 @@ void jbd2_journal_commit_transaction(jou
 	 * has reserved.  This is consistent with the existing behaviour
 	 * that multiple jbd2_journal_get_write_access() calls to the same
 	 * buffer are perfectly permissible.
+	 * We use journal->j_state_lock here to serialize processing of
+	 * t_reserved_list with eviction of buffers from journal_unmap_buffer().
 	 */
 	while (commit_transaction->t_reserved_list) {
 		jh = commit_transaction->t_reserved_list;
@@ -540,6 +541,7 @@ void jbd2_journal_commit_transaction(jou
 		jbd2_journal_refile_buffer(journal, jh);
 	}
 
+	write_unlock(&journal->j_state_lock);
 	/*
 	 * Now try to drop any written-back buffers from the journal's
 	 * checkpoint lists.  We do this *before* commit because it potentially
author maintainer
#122 lore raw

PATCH 122/124 spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller

In reply to Greg Kroah-Hartman

From: Tudor Ambarus <[email protected]>

commit 8c235cc25087495c4288d94f547e9d3061004991 upstream.

Use the spi_mem_default_supports_op() core helper in order to take into account the buswidth specified by the user in device tree.

Fixes 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
---
 drivers/spi/atmel-quadspi.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/spi/atmel-quadspi.c +3 -0
@@ -277,6 +277,9 @@ static int atmel_qspi_find_mode(const st
 static bool atmel_qspi_supports_op(struct spi_mem *mem,
 				   const struct spi_mem_op *op)
 {
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
 	if (atmel_qspi_find_mode(op) < 0)
 		return false;
 
author maintainer
#123 lore raw

PATCH 123/124 block/compat_ioctl: fix range check in BLKGETSIZE

In reply to Greg Kroah-Hartman

From: Khazhismel Kumykov <[email protected]>

commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for large disks.

---
 block/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
block/ioctl.c +1 -1
@@ -645,7 +645,7 @@ long compat_blkdev_ioctl(struct file *fi
 			(bdev->bd_disk->bdi->ra_pages * PAGE_SIZE) / 512);
 	case BLKGETSIZE:
 		size = i_size_read(bdev->bd_inode);
-		if ((size >> 9) > ~0UL)
+		if ((size >> 9) > ~(compat_ulong_t)0)
 			return -EFBIG;
 		return compat_put_ulong(argp, size >> 9);
 
author maintainer
#124 lore raw

PATCH 124/124 arm64: dts: qcom: add IPA qcom,qmp property

In reply to Greg Kroah-Hartman

From: Alex Elder <[email protected]>

commit 73419e4d2fd1b838fcb1df6a978d67b3ae1c5c01 upstream.

At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi |    2 ++
 arch/arm64/boot/dts/qcom/sc7280.dtsi |    2 ++
 arch/arm64/boot/dts/qcom/sm8350.dtsi |    2 ++
 3 files changed, 6 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +2 -0
@@ -1460,6 +1460,8 @@
 					     "imem",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
arch/arm64/boot/dts/qcom/sc7280.dtsi +2 -0
@@ -615,6 +615,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
arch/arm64/boot/dts/qcom/sm8350.dtsi +2 -0
@@ -736,6 +736,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
maintainer Tested-by on the v1 series
#125 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.15:

    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    114 tests:	114 pass, 0 fail

Linux version: 5.15.36-rc1-gba92a7feb8d6
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by on the v1 series
#126 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Signature · 1 line
Florian
#127 lore raw
In reply to Greg Kroah-Hartman
Quoted 557 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

     Linux 5.15.36-rc1

Alex Elder <[email protected]>
arm64: dts: qcom: add IPA qcom,qmp property

Khazhismel Kumykov <[email protected]>
block/compat_ioctl: fix range check in BLKGETSIZE

Tudor Ambarus <[email protected]>
spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller

Ye Bin <[email protected]>
jbd2: fix a potential race while discarding reserved buffers after an abort

Florian Westphal <[email protected]>
netfilter: nft_ct: fix use after free when attaching zone template

Theodore Ts'o <[email protected]>
ext4: force overhead calculation if the s_overhead_cluster makes no sense

Theodore Ts'o <[email protected]>
ext4: fix overhead calculation to account for the reserved gdt blocks

wangjianjian (C) <[email protected]>
ext4, doc: fix incorrect h_reserved size

Tadeusz Struk <[email protected]>
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

Ye Bin <[email protected]>
ext4: fix use-after-free in ext4_search_dir

Ye Bin <[email protected]>
ext4: fix symlink file size not match to file content

Darrick J. Wong <[email protected]>
ext4: fix fallocate to use file_modified to update permissions consistently

Florian Westphal <[email protected]>
netfilter: conntrack: avoid useless indirection during conntrack destruction

Florian Westphal <[email protected]>
netfilter: conntrack: convert to refcount_t api

Mingwei Zhang <[email protected]>
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

Sean Christopherson <[email protected]>
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

Sean Christopherson <[email protected]>
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

Like Xu <[email protected]>
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

Rob Herring <[email protected]>
arm_pmu: Validate single/group leader events

Sergey Matyukevich <[email protected]>
ARC: entry: fix syscall_trace_exit argument

Sasha Neftin <[email protected]>
e1000e: Fix possible overflow in LTR decoding

Xiaomeng Tong <[email protected]>
ASoC: soc-dapm: fix two incorrect uses of list iterator

Mario Limonciello <[email protected]>
gpio: Request interrupts after IRQ is initialized

Paolo Valerio <[email protected]>
openvswitch: fix OOB access in reserve_sfa_size()

Max Filippov <[email protected]>
xtensa: fix a7 clobbering in coprocessor context load/store

Guo Ren <[email protected]>
xtensa: patch_text: Fixup last cpu should be master

Leo Yan <[email protected]>
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event

Leo Yan <[email protected]>
perf script: Always allow field 'data_src' for auxtrace

Athira Rajeev <[email protected]>
powerpc/perf: Fix power10 event alternatives

Athira Rajeev <[email protected]>
powerpc/perf: Fix power9 event alternatives

Miaoqian Lin <[email protected]>
drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage

Alexey Kardashevskiy <[email protected]>
KVM: PPC: Fix TCE handling for VFIO

Dave Stevenson <[email protected]>
drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

Dave Stevenson <[email protected]>
drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

Zhipeng Xie <[email protected]>
perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

kuyo chang <[email protected]>
sched/pelt: Fix attach_entity_load_avg() corner case

Tom Rix <[email protected]>
scsi: sr: Do not leak information in ioctl

Miaoqian Lin <[email protected]>
Input: omap4-keypad - fix pm_runtime_get_sync() error checking

Manuel Ullmann <[email protected]>
net: atlantic: invert deep par in pm functions, preventing null derefs

Kevin Groeneveld <[email protected]>
dmaengine: imx-sdma: fix init of uart scripts

Xiaomeng Tong <[email protected]>
dma: at_xdmac: fix a missing check on list iterator

Zheyu Ma <[email protected]>
ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Alistair Popple <[email protected]>
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()

Nico Pache <[email protected]>
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup

Christophe Leroy <[email protected]>
mm, hugetlb: allow for "high" userspace addresses

Shakeel Butt <[email protected]>
memcg: sync flush only if periodic flush is delayed

Xu Yu <[email protected]>
mm/memory-failure.c: skip huge_zero_page in memory_failure()

Shubhrajyoti Datta <[email protected]>
EDAC/synopsys: Read the error count from the correct register

Christoph Hellwig <[email protected]>
nvme-pci: disable namespace identifiers for Qemu controllers

Christoph Hellwig <[email protected]>
nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202

Christoph Hellwig <[email protected]>
nvme: add a quirk to disable namespace identifiers

NeilBrown <[email protected]>
VFS: filename_create(): fix incorrect intent.

Mikulas Patocka <[email protected]>
stat: fix inconsistency between struct stat and struct compat_stat

Mike Christie <[email protected]>
scsi: qedi: Fix failed disconnect handling

Mike Christie <[email protected]>
scsi: iscsi: Fix NOP handling during conn recovery

Mike Christie <[email protected]>
scsi: iscsi: Merge suspend fields

Mike Christie <[email protected]>
scsi: iscsi: Release endpoint ID when its freed

Tomas Melin <[email protected]>
net: macb: Restart tx only if queue pointer is lagging

Xiaoke Wang <[email protected]>
drm/msm/mdp5: check the return of kzalloc()

Lv Ruyi <[email protected]>
dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

Borislav Petkov <[email protected]>
brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

Borislav Petkov <[email protected]>
mt76: Fix undefined behavior due to shift overflowing the constant

Kai-Heng Feng <[email protected]>
net: atlantic: Avoid out-of-bounds indexing

David Howells <[email protected]>
cifs: Check the IOCB_DIRECT flag, not O_DIRECT

Hongbin Wang <[email protected]>
vxlan: fix error return code in vxlan_fdb_append

Rob Herring <[email protected]>
arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes

Xiaoke Wang <[email protected]>
drm/msm/disp: check the return value of kzalloc()

Borislav Petkov <[email protected]>
ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

Jiapeng Chong <[email protected]>
platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

Sameer Pujar <[email protected]>
reset: tegra-bpmp: Restore Handle errors in BPMP response

Heiner Kallweit <[email protected]>
reset: renesas: Check return value of reset_control_deassert()

Kees Cook <[email protected]>
ARM: vexpress/spc: Avoid negative array index when !SMP

Muchun Song <[email protected]>

     arm64: mm: fix p?d_leaf()

Ido Schimmel <[email protected]>
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

Dave Jiang <[email protected]>
dmaengine: idxd: skip clearing device context when device is read-only

Dave Jiang <[email protected]>
dmaengine: idxd: add RO check for wq max_transfer_size write

Dave Jiang <[email protected]>
dmaengine: idxd: add RO check for wq max_batch_size write

Kevin Hao <[email protected]>
net: stmmac: Use readl_poll_timeout_atomic() in atomic state

José Roberto de Souza <[email protected]>
drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails

Eric Dumazet <[email protected]>
netlink: reset network and mac headers in netlink_dump()

Vladimir Oltean <[email protected]>
net: mscc: ocelot: fix broken IP multicast flooding

Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Calculate checksums in tagger

Oliver Hartkopp <[email protected]>
can: isotp: stop timeout monitoring when no first frame was sent

Eric Dumazet <[email protected]>
ipv6: make ip6_rt_gc_expire an atomic_t

David Ahern <[email protected]>
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu

Eric Dumazet <[email protected]>
net/sched: cls_u32: fix possible leak in u32_init_knode()

Stephen Hemminger <[email protected]>
net: restore alpha order to Ethernet devices in config

Peilin Ye <[email protected]>
ip6_gre: Fix skb_under_panic in __gre6_xmit()

Peilin Ye <[email protected]>

     ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()

Hangbin Liu <[email protected]>
net/packet: fix packet_sock xmit return value checking

Tony Lu <[email protected]>
net/smc: Fix sock leak when release after smc_shutdown()

David Howells <[email protected]>
rxrpc: Restore removed timer deletion

Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix warning about PCM count when used with SOF

Vinicius Costa Gomes <[email protected]>
igc: Fix suspending when PTM is active

Sasha Neftin <[email protected]>
igc: Fix BUG: scheduling while atomic

Sasha Neftin <[email protected]>
igc: Fix infinite loop in release_swfw_sync

Matthias Schiffer <[email protected]>
spi: cadence-quadspi: fix incorrect supports_op() return value

Sabrina Dubroca <[email protected]>
esp: limit skb_page_frag_refill use to a single page

Allen-KH Cheng <[email protected]>
spi: spi-mtk-nor: initialize spi controller after resume

Herve Codina <[email protected]>
dmaengine: dw-edma: Fix unaligned 64bit access

zhangqilong <[email protected]>
dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources

Miaoqian Lin <[email protected]>
dmaengine: imx-sdma: Fix error checking in sdma_event_remap

Dave Jiang <[email protected]>
dmaengine: idxd: fix device cleanup on disable

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_component

Miaoqian Lin <[email protected]>

     ASoC: rk817: Use devm_clk_get() in rk817_platform_probe

Peter Ujfalusi <[email protected]>
ASoC: topology: Correct error handling in soc_tplg_dapm_widget_create()

Mark Brown <[email protected]>
ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek

Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo NP70PNP

Takashi Iwai <[email protected]>
ALSA: usb-audio: Clear MIDI port active flag after draining

Eric Dumazet <[email protected]>
net/sched: cls_u32: fix netns refcount changes in u32_change()

Peter Wang <[email protected]>
scsi: ufs: core: scsi_get_lba() error fix

Bob Peterson <[email protected]>
gfs2: assign rgrp glock before compute_bitstructs

Marco Elver <[email protected]>
mm, kfence: support kmem_dump_obj() for KFENCE objects

Adrian Hunter <[email protected]>
perf tools: Fix segfault accessing sample_id xyarray

Xiongwei Song <[email protected]>
mm: page_alloc: fix building error on -Werror=array-compare

Kees Cook <[email protected]>
etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overead

Anshuman Khandual <[email protected]>
arm64/mm: drop HAVE_ARCH_PFN_VALID

Mike Rapoport <[email protected]>
dma-mapping: remove bogus test for pfn_valid from dma_map_resource

Darrick J. Wong <[email protected]>
xfs: return errors in xfs_fs_sync_fs

Darrick J. Wong <[email protected]>

     vfs: make sync_filesystem return errors from ->sync_fs

Christoph Hellwig <[email protected]>
block: simplify the block device syncing code

Christoph Hellwig <[email protected]>
block: remove __sync_blockdev

Christoph Hellwig <[email protected]>
fs: remove __sync_filesystem

-------------

Diffstat:

  Documentation/filesystems/ext4/attributes.rst      |  2 +-
  Makefile                                           |  4 +-
  arch/arc/kernel/entry.S                            |  1 +
  arch/arm/mach-vexpress/spc.c                       |  2 +-
  arch/arm64/Kconfig                                 |  1 -
  arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi  |  8 +--
  arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi  |  8 +--
  arch/arm64/boot/dts/qcom/sc7180.dtsi               |  2 +
  arch/arm64/boot/dts/qcom/sc7280.dtsi               |  2 +
  arch/arm64/boot/dts/qcom/sm8350.dtsi               |  2 +
  arch/arm64/include/asm/page.h                      |  1 -
  arch/arm64/include/asm/pgtable.h                   |  4 +-
  arch/arm64/mm/init.c                               | 37 -----------
  arch/powerpc/kvm/book3s_64_vio.c                   | 45 +++++++-------
  arch/powerpc/kvm/book3s_64_vio_hv.c                | 44 ++++++-------
  arch/powerpc/perf/power10-pmu.c                    |  2 +-
  arch/powerpc/perf/power9-pmu.c                     |  8 +--
  arch/x86/include/asm/compat.h                      |  6 +-
  arch/x86/kvm/pmu.h                                 |  9 +++
  arch/x86/kvm/svm/pmu.c                             |  1 +
  arch/x86/kvm/svm/sev.c                             |  9 ++-
  arch/x86/kvm/vmx/nested.c                          |  5 ++
  arch/x86/kvm/vmx/pmu_intel.c                       |  8 +--
  arch/x86/kvm/vmx/vmx.c                             |  5 ++
  arch/x86/kvm/vmx/vmx.h                             |  1 +
  arch/x86/kvm/x86.c                                 | 15 ++++-
  arch/xtensa/kernel/coprocessor.S                   |  4 +-
  arch/xtensa/kernel/jump_label.c                    |  2 +-
  block/bdev.c                                       | 28 ++++++---
  block/ioctl.c                                      |  2 +-
  drivers/ata/pata_marvell.c                         |  2 +
  drivers/dma/at_xdmac.c                             | 12 ++--
  drivers/dma/dw-edma/dw-edma-v0-core.c              |  7 ++-
  drivers/dma/idxd/device.c                          |  6 +-
  drivers/dma/idxd/sysfs.c                           |  6 ++
  drivers/dma/imx-sdma.c                             | 32 +++++-----
  drivers/dma/mediatek/mtk-uart-apdma.c              |  9 ++-
  drivers/edac/synopsys_edac.c                       | 16 +++--
  drivers/gpio/gpiolib.c                             |  4 +-
  drivers/gpu/drm/i915/display/intel_psr.c           | 38 +++++++-----
  drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c         |  3 +
  drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c  |  2 +
  .../gpu/drm/panel/panel-raspberrypi-touchscreen.c  | 13 +++-
  drivers/gpu/drm/vc4/vc4_dsi.c                      |  2 +-
  drivers/input/keyboard/omap4-keypad.c              |  2 +-
  drivers/net/ethernet/Kconfig                       | 26 ++++----
  drivers/net/ethernet/aquantia/atlantic/aq_nic.c    |  8 +--
  .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |  8 +--
  drivers/net/ethernet/aquantia/atlantic/aq_vec.c    | 24 ++++----
  drivers/net/ethernet/cadence/macb_main.c           |  8 +++
  drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c |  8 ++-
  drivers/net/ethernet/intel/e1000e/ich8lan.c        |  4 +-
  drivers/net/ethernet/intel/igc/igc_i225.c          | 11 +++-
  drivers/net/ethernet/intel/igc/igc_phy.c           |  4 +-
  drivers/net/ethernet/intel/igc/igc_ptp.c           | 15 ++++-
  drivers/net/ethernet/mscc/ocelot.c                 |  2 +
  .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  4 +-
  drivers/net/vxlan.c                                |  4 +-
  .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  2 +-
  drivers/net/wireless/mediatek/mt76/mt76x2/pci.c    |  2 +-
  drivers/nvme/host/core.c                           | 24 ++++++--
  drivers/nvme/host/nvme.h                           |  5 ++
  drivers/nvme/host/pci.c                            |  9 ++-
  drivers/perf/arm_pmu.c                             | 10 ++-
  drivers/platform/x86/samsung-laptop.c              |  2 -
  drivers/reset/reset-rzg2l-usbphy-ctrl.c            |  4 +-
  drivers/reset/tegra/reset-bpmp.c                   |  9 ++-
  drivers/scsi/bnx2i/bnx2i_hwi.c                     |  2 +-
  drivers/scsi/bnx2i/bnx2i_iscsi.c                   |  2 +-
  drivers/scsi/cxgbi/libcxgbi.c                      |  6 +-
  drivers/scsi/libiscsi.c                            | 27 ++++----
  drivers/scsi/libiscsi_tcp.c                        |  2 +-
  drivers/scsi/qedi/qedi_iscsi.c                     | 69 ++++++++++-----------
  drivers/scsi/scsi_transport_iscsi.c                | 71 +++++++++++----------
  drivers/scsi/sr_ioctl.c                            | 15 ++++-
  drivers/scsi/ufs/ufshcd.c                          |  5 +-
  drivers/spi/atmel-quadspi.c                        |  3 +
  drivers/spi/spi-cadence-quadspi.c                  | 19 +++++-
  drivers/spi/spi-mtk-nor.c                          | 12 +++-
  fs/cifs/cifsfs.c                                   |  2 +-
  fs/ext4/ext4.h                                     |  6 +-
  fs/ext4/extents.c                                  | 32 +++++++---
  fs/ext4/inode.c                                    | 18 +++++-
  fs/ext4/namei.c                                    |  4 +-
  fs/ext4/page-io.c                                  |  4 +-
  fs/ext4/super.c                                    | 19 ++++--
  fs/gfs2/rgrp.c                                     |  9 +--
  fs/hugetlbfs/inode.c                               |  9 +--
  fs/internal.h                                      | 11 ----
  fs/jbd2/commit.c                                   |  4 +-
  fs/namei.c                                         | 22 +++----
  fs/stat.c                                          | 19 +++---
  fs/sync.c                                          | 72 +++++++++-------------
  fs/xfs/xfs_super.c                                 |  6 +-
  include/linux/blkdev.h                             |  9 +++
  include/linux/etherdevice.h                        |  5 +-
  include/linux/kfence.h                             | 24 ++++++++
  include/linux/memcontrol.h                         |  5 ++
  include/linux/netfilter/nf_conntrack_common.h      | 10 +--
  include/linux/sched.h                              |  1 +
  include/linux/sched/mm.h                           |  8 +++
  include/net/esp.h                                  |  2 -
  include/net/netfilter/nf_conntrack.h               |  8 ++-
  include/net/netns/ipv6.h                           |  4 +-
  include/scsi/libiscsi.h                            |  9 +--
  include/scsi/scsi_transport_iscsi.h                |  2 +-
  kernel/dma/mapping.c                               |  4 --
  kernel/events/core.c                               |  2 +-
  kernel/events/internal.h                           |  5 ++
  kernel/events/ring_buffer.c                        |  5 --
  kernel/sched/fair.c                                | 10 +--
  mm/kfence/core.c                                   | 21 -------
  mm/kfence/kfence.h                                 | 21 +++++++
  mm/kfence/report.c                                 | 47 ++++++++++++++
  mm/memcontrol.c                                    | 12 +++-
  mm/memory-failure.c                                | 13 ++++
  mm/mmap.c                                          |  8 ---
  mm/mmu_notifier.c                                  | 14 ++++-
  mm/oom_kill.c                                      | 54 +++++++++++-----
  mm/page_alloc.c                                    |  2 +-
  mm/slab.c                                          |  2 +-
  mm/slab.h                                          |  2 +-
  mm/slab_common.c                                   |  9 +++
  mm/slob.c                                          |  2 +-
  mm/slub.c                                          |  2 +-
  mm/workingset.c                                    |  2 +-
  net/can/isotp.c                                    | 10 ++-
  net/dsa/tag_hellcreek.c                            |  8 +++
  net/ipv4/esp4.c                                    |  5 +-
  net/ipv6/esp6.c                                    |  5 +-
  net/ipv6/ip6_gre.c                                 | 14 +++--
  net/ipv6/route.c                                   | 11 ++--
  net/l3mdev/l3mdev.c                                |  2 +-
  net/netfilter/nf_conntrack_core.c                  | 38 ++++++------
  net/netfilter/nf_conntrack_expect.c                |  4 +-
  net/netfilter/nf_conntrack_netlink.c               |  6 +-
  net/netfilter/nf_conntrack_standalone.c            |  4 +-
  net/netfilter/nf_flow_table_core.c                 |  2 +-
  net/netfilter/nf_synproxy_core.c                   |  1 -
  net/netfilter/nft_ct.c                             |  9 +--
  net/netfilter/xt_CT.c                              |  3 +-
  net/netlink/af_netlink.c                           |  7 +++
  net/openvswitch/conntrack.c                        |  1 -
  net/openvswitch/flow_netlink.c                     |  2 +-
  net/packet/af_packet.c                             | 13 ++--
  net/rxrpc/net_ns.c                                 |  2 +
  net/sched/act_ct.c                                 |  1 -
  net/sched/cls_u32.c                                | 24 +++++---
  net/smc/af_smc.c                                   |  4 +-
  sound/pci/hda/patch_hdmi.c                         |  6 +-
  sound/pci/hda/patch_realtek.c                      |  1 +
  sound/soc/atmel/sam9g20_wm8731.c                   | 61 ------------------
  sound/soc/codecs/msm8916-wcd-digital.c             |  9 ++-
  sound/soc/codecs/rk817_codec.c                     |  2 +-
  sound/soc/codecs/wcd934x.c                         | 26 +-------
  sound/soc/soc-dapm.c                               |  6 +-
Quoted 10 lines
  sound/soc/soc-topology.c                           |  4 +-
  sound/usb/midi.c                                   |  1 +
  sound/usb/usbaudio.h                               |  2 +-
  tools/lib/perf/evlist.c                            |  3 +-
  tools/perf/builtin-report.c                        | 14 +++++
  tools/perf/builtin-script.c                        |  2 +-
  .../selftests/drivers/net/mlxsw/vxlan_flooding.sh  | 17 +++++
  163 files changed, 1037 insertions(+), 702 deletions(-)

Hi,

Please revert :

76723ed1fb89 2021-12-01 | locking/rwsem: Make handoff bit handling more consistent

In Linux 5.15.y.

It introduces system hangs running fio test suite :

PID: 3682 TASK: ffff8f489ae34bc0 CPU: 2 COMMAND: "dio/dm-0"
#0 [fffffe0000083e50] crash_nmi_callback at ffffffff828772b3 #1 [fffffe0000083e58] nmi_handle at ffffffff82840778 #2 [fffffe0000083ea0] default_do_nmi at ffffffff8337a1e2 #3 [fffffe0000083ec8] exc_nmi at ffffffff8337a48d #4 [fffffe0000083ef0] end_repeat_nmi at ffffffff8340153b

    [exception RIP: _raw_spin_lock_irq+23]
    RIP: ffffffff8338b2e7  RSP: ffff9c4409b47c78  RFLAGS: 00000046
    RAX: 0000000000000000  RBX: ffff8f489ae34bc0  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: 0000000000000000  RDI: ffff8f47f7b90104
    RBP: ffff9c4409b47d20   R8: 0000000000000000   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000000  R12: ffff8f47f7b90104
    R13: ffff9c4409b47cb0  R14: ffff8f47f7b900f0  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

--- <NMI exception stack> ---
#5 [ffff9c4409b47c78] _raw_spin_lock_irq at ffffffff8338b2e7 #6 [ffff9c4409b47c78] rwsem_down_write_slowpath at ffffffff82925be9 #7 [ffff9c4409b47d28] ext4_map_blocks at ffffffffc11c26dc [ext4] #8 [ffff9c4409b47d98] ext4_convert_unwritten_extents at
ffffffffc11ad9e0 [ext4]
#9 [ffff9c4409b47df0] ext4_dio_write_end_io at ffffffffc11b22aa [ext4]
#10 [ffff9c4409b47e18] iomap_dio_complete at ffffffff82c135b5 #11 [ffff9c4409b47e48] iomap_dio_complete_work at ffffffff82c136b7 #12 [ffff9c4409b47e60] process_one_work at ffffffff828d9061 #13 [ffff9c4409b47ea8] rescuer_thread at ffffffff828d97eb #14 [ffff9c4409b47f10] kthread at ffffffff828e10c7
#15 [ffff9c4409b47f50] ret_from_fork at ffffffff82804cf2

author maintainer
#128 lore raw
Quoted 4 lines · On Tue, Apr 26, 2022 at 12:37:21PM -0500, [email protected] wrote:

76723ed1fb89 2021-12-01 | locking/rwsem: Make handoff bit handling more consistent

In Linux 5.15.y.

That commit is in 5.15.6, released December 1, 2021. And this just now shows up? How is this related to 5.15.36-rc1?

Please start a new thread with the authors/reviewers of that commit and we will be glad to discuss it.

thanks,

greg k-h

#129 lore raw
Quoted 8 lines · Greg Kroah-Hartman
Quoted 4 lines · On Tue, Apr 26, 2022 at 12:37:21PM -0500, [email protected] wrote:

76723ed1fb89 2021-12-01 | locking/rwsem: Make handoff bit handling more consistent

In Linux 5.15.y.

That commit is in 5.15.6, released December 1, 2021. And this just now shows up? How is this related to 5.15.36-rc1?

Hi,

This was briefly discussed in :

Re: [PATCH v5] locking/rwsem: Make handoff bit handling more consistent

Additional testing shows the rwsem hang still exists. It takes a 24hr fio soak test to show up.

It likely still exists in Linux 5.18.y too. We will be testing that in the future as time permits.

Quoted 7 lines

Please start a new thread with the authors/reviewers of that commit and we will be glad to discuss it.

thanks,

greg k-h

Will do.

Thx

author maintainer
#130 lore raw
Quoted 7 lines · John Donnelly
Quoted 6 lines · Greg Kroah-Hartman
Quoted 4 lines · On Tue, Apr 26, 2022 at 12:37:21PM -0500, [email protected] wrote:

76723ed1fb89 2021-12-01 | locking/rwsem: Make handoff bit handling more consistent

In Linux 5.15.y.

Quoted 8 lines
Quoted 2 lines

That commit is in 5.15.6, released December 1, 2021. And this just now shows up? How is this related to 5.15.36-rc1?

Hi,

This was briefly discussed in :

Re: [PATCH v5] locking/rwsem: Make handoff bit handling more consistent

Have a lore.kernel.org link? Why not continue it there?

Quoted 5 lines

Additional testing shows the rwsem hang still exists. It takes a 24hr fio soak test to show up.

It likely still exists in Linux 5.18.y too. We will be testing that in the future as time permits.

Can you test 5.17.y also as there is no 5.18.y yet :)

thanks,

greg k-h

#131 lore raw
Quoted 11 lines · Greg Kroah-Hartman
Quoted 10 lines · John Donnelly
Quoted 8 lines · Greg Kroah-Hartman
Quoted 4 lines · On Tue, Apr 26, 2022 at 12:37:21PM -0500, [email protected] wrote:

76723ed1fb89 2021-12-01 | locking/rwsem: Make handoff bit handling more consistent

In Linux 5.15.y.

That commit is in 5.15.6, released December 1, 2021. And this just now shows up? How is this related to 5.15.36-rc1?

Quoted 7 lines
Quoted 5 lines

Hi,

This was briefly discussed in :

Re: [PATCH v5] locking/rwsem: Make handoff bit handling more consistent

Have a lore.kernel.org link? Why not continue it there?

https://lore.kernel.org/all/[email protected]/

I tried and the thread is quiet.

Quoted 8 lines
Quoted 6 lines

Additional testing shows the rwsem hang still exists. It takes a 24hr fio soak test to show up.

It likely still exists in Linux 5.18.y too. We will be testing that in the future as time permits.

Can you test 5.17.y also as there is no 5.18.y yet :)

We did. It failed there too . ;-) We happened to have 5.18.rc2 in the work queue

Quoted 4 lines

thanks,

greg k-h

Tested-by Linux Kernel Functional Testing on the v1 series
#132 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.15.36-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.15.y
* git commit: ba92a7feb8d6c5f9baf0f85bd8b1a0e4ee2833c0
* git describe: v5.15.35-125-gba92a7feb8d6
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.35-125-gba92a7feb8d6

## Test Regressions (compared to v5.15.35)
No test regressions found.

## Metric Regressions (compared to v5.15.35)
No metric regressions found.

## Test Fixes (compared to v5.15.35)
No test fixes found.

## Metric Fixes (compared to v5.15.35)
No metric fixes found.

## Test result summary
total: 105208, pass: 88483, fail: 1064, skip: 14478, xfail: 1183

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 41 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 54 passed, 6 failed
* riscv: 27 total, 22 passed, 5 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#133 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

Build results:

	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Guenter

Tested-by on the v1 series
#134 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by on the v1 series
#135 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

5.15.36-rc1 compiled and booted with no errors or regressions on my x86_64 test system.

Cheers,
Slade

Tested-by on the v1 series
#136 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.36-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by on the v1 series
#137 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.36 release. There are 124 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Apr 2022 08:17:22 +0000. Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220408): 62 configs -> no failure arm (gcc version 11.2.1 20220408): 100 configs -> no new failure arm64 (gcc version 11.2.1 20220408): 3 configs -> no failure x86_64 (gcc version 11.2.1 20220408): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/1068
[2]. https://openqa.qa.codethink.co.uk/tests/1073
[3]. https://openqa.qa.codethink.co.uk/tests/1075

--
Regards
Sudip