Skip to contentSkip to conversation

ASoC: Intel: soc-acpi: correct device endpoints for max98373

PATCH New Sasha Levin 1 participant 15 messages Apr 26, 2022

Subsystems (8)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/15 ASoC: Intel: soc-acpi: correct device endpoints for max98373

From: Chao Song <[email protected]>

[ Upstream commit 97326be14df7bacc6ba5c62c0556298c27ea0432 ]

The left speaker of max98373 uses spk_r_endpoint, and right speaker uses spk_l_endpoint, this is obviously wrong.

This patch corrects the endpoints for max98373 codec.

---
 sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/intel/common/soc-acpi-intel-tgl-match.c +2 -2
index 11801b905ecc..c93d8019b0e5 100644
@@ -127,13 +127,13 @@ static const struct snd_soc_acpi_adr_device mx8373_1_adr[] = {
 	{
 		.adr = 0x000123019F837300ull,
 		.num_endpoints = 1,
-		.endpoints = &spk_l_endpoint,
+		.endpoints = &spk_r_endpoint,
 		.name_prefix = "Right"
 	},
 	{
 		.adr = 0x000127019F837300ull,
 		.num_endpoints = 1,
-		.endpoints = &spk_r_endpoint,
+		.endpoints = &spk_l_endpoint,
 		.name_prefix = "Left"
 	}
 };
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/15 ASoC: wm8731: Disable the regulator when probing fails

From: Zheyu Ma <[email protected]>

[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]

When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130
---
 sound/soc/codecs/wm8731.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
sound/soc/codecs/wm8731.c +11 -8
index dcee7b2bd3d7..859ebcec8383 100644
@@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
 		dev_err(dev, "Failed to issue reset: %d\n", ret);
-		goto err_regulator_enable;
+		goto err;
 	}
 
 	/* Clear POWEROFF, keep everything else disabled */
@@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 
 	regcache_mark_dirty(wm8731->regmap);
 
-err_regulator_enable:
-	/* Regulators will be enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
 	return ret;
 }
 
@@ -766,21 +763,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		ret = PTR_ERR(wm8731->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
 			ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	ret = wm8731_hw_init(&i2c->dev, wm8731);
 	if (ret != 0)
-		return ret;
+		goto err_regulator_enable;
 
 	ret = devm_snd_soc_register_component(&i2c->dev,
 			&soc_component_dev_wm8731, &wm8731_dai, 1);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	return 0;
+
+err_regulator_enable:
+	/* Regulators will be enabled by bias management */
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+	return ret;
 }
 
 static int wm8731_i2c_remove(struct i2c_client *client)
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/15 ext4: fix bug_on in start_this_handle during umount filesystem

In reply to Sasha Levin

From: Ye Bin <[email protected]>

[ Upstream commit b98535d091795a79336f520b0708457aacf55c67 ]

We got issue as follows:

------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:389!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
Workqueue: events flush_stashed_error_work
RIP: 0010:start_this_handle+0x41c/0x1160
RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
FS:  0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 jbd2__journal_start+0x38a/0x790
 jbd2_journal_start+0x19/0x20
 flush_stashed_error_work+0x110/0x2b3
 process_one_work+0x688/0x1080
 worker_thread+0x8b/0xc50
 kthread+0x26f/0x310
 ret_from_fork+0x22/0x30
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Above issue may happen as follows:
umount read procfs error_work
ext4_put_super
flush_work(&sbi->s_error_work);

                      ext4_mb_seq_groups_show
	                ext4_mb_load_buddy_gfp
			  ext4_mb_init_group
			    ext4_mb_init_cache
	                      ext4_read_block_bitmap_nowait
			        ext4_validate_block_bitmap
				  ext4_error
			            ext4_handle_error
			              schedule_work(&EXT4_SB(sb)->s_error_work);
  ext4_unregister_sysfs(sb);
  jbd2_journal_destroy(sbi->s_journal);
    journal_kill_thread
      journal->j_flags |= JBD2_UNMOUNT;
                                          flush_stashed_error_work
				            jbd2_journal_start
					      start_this_handle
					        BUG_ON(journal->j_flags & JBD2_UNMOUNT);

To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super().

---
 fs/ext4/super.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
fs/ext4/super.c +12 -7
index fd4d34deb9fc..d72adbc7e836 100644
@@ -1167,20 +1167,25 @@ static void ext4_put_super(struct super_block *sb)
 	int aborted = 0;
 	int i, err;
 
-	ext4_unregister_li_request(sb);
-	ext4_quota_off_umount(sb);
-
-	flush_work(&sbi->s_error_work);
-	destroy_workqueue(sbi->rsv_conversion_wq);
-	ext4_release_orphan_info(sb);
-
 	/*
 	 * Unregister sysfs before destroying jbd2 journal.
 	 * Since we could still access attr_journal_task attribute via sysfs
 	 * path which could have sbi->s_journal->j_task as NULL
+	 * Unregister sysfs before flush sbi->s_error_work.
+	 * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
+	 * read metadata verify failed then will queue error work.
+	 * flush_stashed_error_work will call start_this_handle may trigger
+	 * BUG_ON.
 	 */
 	ext4_unregister_sysfs(sb);
 
+	ext4_unregister_li_request(sb);
+	ext4_quota_off_umount(sb);
+
+	flush_work(&sbi->s_error_work);
+	destroy_workqueue(sbi->rsv_conversion_wq);
+	ext4_release_orphan_info(sb);
+
 	if (sbi->s_journal) {
 		aborted = is_journal_aborted(sbi->s_journal);
 		err = jbd2_journal_destroy(sbi->s_journal);
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/15 arch: xtensa: platforms: Fix deadlock in rs_close()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit eb5adc70754d26a260f8b42d39db42da0d0af500 ]

There is a deadlock in rs_close(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | rs_open()
rs_close()                 |  mod_timer()
 spin_lock_bh() //(1)      |  (wait a time)
 ...                       | rs_poll()
 del_timer_sync()          |  spin_lock() //(2)
 (wait timer to stop)      |  ...

We hold timer_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need timer_lock in position (2) of thread 2. As a result, rs_close() will block forever.

This patch deletes the redundant timer_lock in order to prevent the deadlock. Because there is no race condition between rs_close, rs_open and rs_poll.

Message-Id: <[email protected]>

---
 arch/xtensa/platforms/iss/console.c | 8 --------
 1 file changed, 8 deletions(-)
arch/xtensa/platforms/iss/console.c +0 -8
index 81d7c7e8f7e9..10b79d3c74e0 100644
@@ -36,24 +36,19 @@ static void rs_poll(struct timer_list *);
 static struct tty_driver *serial_driver;
 static struct tty_port serial_port;
 static DEFINE_TIMER(serial_timer, rs_poll);
-static DEFINE_SPINLOCK(timer_lock);
 
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	spin_lock_bh(&timer_lock);
 	if (tty->count == 1)
 		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
-	spin_unlock_bh(&timer_lock);
 
 	return 0;
 }
 
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
-	spin_lock_bh(&timer_lock);
 	if (tty->count == 1)
 		del_timer_sync(&serial_timer);
-	spin_unlock_bh(&timer_lock);
 }
 
 
@@ -73,8 +68,6 @@ static void rs_poll(struct timer_list *unused)
 	int rd = 1;
 	unsigned char c;
 
-	spin_lock(&timer_lock);
-
 	while (simc_poll(0)) {
 		rd = simc_read(0, &c, 1);
 		if (rd <= 0)
@@ -87,7 +80,6 @@ static void rs_poll(struct timer_list *unused)
 		tty_flip_buffer_push(port);
 	if (rd)
 		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
-	spin_unlock(&timer_lock);
 }
 
 
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/15 ksmbd: increment reference count of parent fp

In reply to Sasha Levin

From: Namjae Jeon <[email protected]>

[ Upstream commit 8510a043d334ecdf83d4604782f288db6bf21d60 ]

Add missing increment reference count of parent fp in ksmbd_lookup_fd_inode().

---
 fs/ksmbd/smb2pdu.c   | 2 ++
 fs/ksmbd/vfs_cache.c | 1 +
 2 files changed, 3 insertions(+)
fs/ksmbd/smb2pdu.c +2 -0
index 192d8308afc2..a9fdb47c2791 100644
@@ -5768,8 +5768,10 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp,
 	if (parent_fp) {
 		if (parent_fp->daccess & FILE_DELETE_LE) {
 			pr_err("parent dir is opened with delete access\n");
+			ksmbd_fd_put(work, parent_fp);
 			return -ESHARE;
 		}
+		ksmbd_fd_put(work, parent_fp);
 	}
 next:
 	return smb2_rename(work, fp, user_ns, rename_info,
fs/ksmbd/vfs_cache.c +1 -0
index 29c1db66bd0f..8b873d92d785 100644
@@ -497,6 +497,7 @@ struct ksmbd_file *ksmbd_lookup_fd_inode(struct inode *inode)
 	list_for_each_entry(lfp, &ci->m_fp_list, node) {
 		if (inode == file_inode(lfp->filp)) {
 			atomic_dec(&ci->m_count);
+			lfp = ksmbd_fp_get(lfp);
 			read_unlock(&ci->m_lock);
 			return lfp;
 		}
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/15 ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION

In reply to Sasha Levin

From: Namjae Jeon <[email protected]>

[ Upstream commit 02655a70b7cc0f534531ee65fa72692f4d31a944 ]

Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size. If fat/exfat is a local share, ->f_bsize is a cluster size that is too large to be used as a sector size. Sector sizes larger than 4K cause problem occurs when mounting an iso file through windows client.

The error message can be obtained using Mount-DiskImage command,
the error is:
"Mount-DiskImage : The sector size of the physical disk on which the virtual disk resides is not supported."

This patch reports fixed 4KB sector size if ->s_blocksize is bigger than 4KB.

---
 fs/ksmbd/smb2pdu.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
fs/ksmbd/smb2pdu.c +7 -4
index a9fdb47c2791..1ed3046dd5b3 100644
@@ -11,6 +11,7 @@
 #include <linux/statfs.h>
 #include <linux/ethtool.h>
 #include <linux/falloc.h>
+#include <linux/mount.h>
 
 #include "glob.h"
 #include "smb2pdu.h"
@@ -4997,15 +4998,17 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work,
 	case FS_SECTOR_SIZE_INFORMATION:
 	{
 		struct smb3_fs_ss_info *info;
+		unsigned int sector_size =
+			min_t(unsigned int, path.mnt->mnt_sb->s_blocksize, 4096);
 
 		info = (struct smb3_fs_ss_info *)(rsp->Buffer);
 
-		info->LogicalBytesPerSector = cpu_to_le32(stfs.f_bsize);
+		info->LogicalBytesPerSector = cpu_to_le32(sector_size);
 		info->PhysicalBytesPerSectorForAtomicity =
-				cpu_to_le32(stfs.f_bsize);
-		info->PhysicalBytesPerSectorForPerf = cpu_to_le32(stfs.f_bsize);
+				cpu_to_le32(sector_size);
+		info->PhysicalBytesPerSectorForPerf = cpu_to_le32(sector_size);
 		info->FSEffPhysicalBytesPerSectorForAtomicity =
-				cpu_to_le32(stfs.f_bsize);
+				cpu_to_le32(sector_size);
 		info->Flags = cpu_to_le32(SSINFO_FLAGS_ALIGNED_DEVICE |
 				    SSINFO_FLAGS_PARTITION_ALIGNED_ON_DEVICE);
 		info->ByteOffsetForSectorAlignment = 0;
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/15 ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()

In reply to Sasha Levin

From: Peilin Ye <[email protected]>

[ Upstream commit f40c064e933d7787ca7411b699504d7a2664c1f5 ]

Do not update tunnel->tun_hlen in data plane code. Use a local variable instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().

---
 net/ipv6/ip6_gre.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv6/ip6_gre.c +3 -2
index 466a5610e3ca..288720838329 100644
@@ -743,6 +743,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		struct ip_tunnel_info *tun_info;
 		const struct ip_tunnel_key *key;
 		__be16 flags;
+		int tun_hlen;
 
 		tun_info = skb_tunnel_info_txcheck(skb);
 		if (IS_ERR(tun_info) ||
@@ -760,9 +761,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		dsfield = key->tos;
 		flags = key->tun_flags &
 			(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
-		tunnel->tun_hlen = gre_calc_hlen(flags);
+		tun_hlen = gre_calc_hlen(flags);
 
-		gre_build_header(skb, tunnel->tun_hlen,
+		gre_build_header(skb, tun_hlen,
 				 flags, protocol,
 				 tunnel_id_to_key32(tun_info->key.tun_id),
 				 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/15 bonding: do not discard lowest hash bit for non layer3+4 hashing

In reply to Sasha Levin

From: suresh kumar <[email protected]>

[ Upstream commit 49aefd131739df552f83c566d0665744c30b1d70 ]

Commit b5f862180d70 was introduced to discard lowest hash bit for layer3+4 hashing but it also removes last bit from non layer3+4 hashing

Below script shows layer2+3 hashing will result in same slave to be used with above commit.

$ cat hash.py
#/usr/bin/python3.6

h_dests=[0xa0, 0xa1]
h_source=0xe3
hproto=0x8
saddr=0x1e7aa8c0
daddr=0x17aa8c0

for h_dest in h_dests:

    hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
    hash ^= hash >> 16
    hash ^= hash >> 8
    print(hash)

print("with last bit removed")
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16
hash ^= hash >> 8
hash = hash >> 1
print(hash)

Output:

$ python3.6 hash.py
522133332
522133333   <-------------- will result in both slaves being used

with last bit removed
261066666
261066666 <-------------- only single slave used

---
 drivers/net/bonding/bond_main.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/net/bonding/bond_main.c +9 -4
index 46c3301a5e07..2e75b7e8f70b 100644
@@ -3817,14 +3817,19 @@ static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb, const v
 	return true;
 }
 
-static u32 bond_ip_hash(u32 hash, struct flow_keys *flow)
+static u32 bond_ip_hash(u32 hash, struct flow_keys *flow, int xmit_policy)
 {
 	hash ^= (__force u32)flow_get_u32_dst(flow) ^
 		(__force u32)flow_get_u32_src(flow);
 	hash ^= (hash >> 16);
 	hash ^= (hash >> 8);
+
 	/* discard lowest hash bit to deal with the common even ports pattern */
-	return hash >> 1;
+	if (xmit_policy == BOND_XMIT_POLICY_LAYER34 ||
+		xmit_policy == BOND_XMIT_POLICY_ENCAP34)
+		return hash >> 1;
+
+	return hash;
 }
 
 /* Generate hash based on xmit policy. If @skb is given it is used to linearize
@@ -3854,7 +3859,7 @@ static u32 __bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, const voi
 			memcpy(&hash, &flow.ports.ports, sizeof(hash));
 	}
 
-	return bond_ip_hash(hash, &flow);
+	return bond_ip_hash(hash, &flow, bond->params.xmit_policy);
 }
 
 /**
@@ -5012,7 +5017,7 @@ static u32 bond_sk_hash_l34(struct sock *sk)
 	/* L4 */
 	memcpy(&hash, &flow.ports.ports, sizeof(hash));
 	/* L3 */
-	return bond_ip_hash(hash, &flow);
+	return bond_ip_hash(hash, &flow, BOND_XMIT_POLICY_LAYER34);
 }
 
 static struct net_device *__bond_sk_get_lower_dev(struct bonding *bond,
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/15 x86: __memcpy_flushcache: fix wrong alignment if size > 2^32

In reply to Sasha Levin

From: Mikulas Patocka <[email protected]>

[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]

The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB.

The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior.

For example:

	suppose that size == 0x100000001, dest == 0x200000002
	min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
	...
	dest += 0x1;

so we copy just one byte "and" dest remains unaligned.

This patch fixes the bug by replacing unsigned with size_t.

---
 arch/x86/lib/usercopy_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/lib/usercopy_64.c +1 -1
index 508c81e97ab1..f1c0befb62df 100644
@@ -121,7 +121,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
 
 	/* cache copy and flush to align dest */
 	if (!IS_ALIGNED(dest, 8)) {
-		unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
+		size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
 
 		memcpy((void *) dest, (void *) source, len);
 		clean_cache_range((void *) dest, len);
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/15 cifs: destage any unwritten data to the server before calling copychunk_write

In reply to Sasha Levin

From: Ronnie Sahlberg <[email protected]>

[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]

because the copychunk_write might cover a region of the file that has not yet been sent to the server and thus fail.

A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile

the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with the 'fcollapse 16k 24k' due to write-back caching.

fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call and it will fail serverside since the file is still 0b in size serverside until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the server before calling COPYCHUNK_WRITE.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373

---
 fs/cifs/smb2ops.c | 8 ++++++++
 1 file changed, 8 insertions(+)
fs/cifs/smb2ops.c +8 -0
index db3ead52ec7c..0c1af2dd9069 100644
@@ -1849,9 +1849,17 @@ smb2_copychunk_range(const unsigned int xid,
 	int chunks_copied = 0;
 	bool chunk_sizes_updated = false;
 	ssize_t bytes_written, total_bytes_written = 0;
+	struct inode *inode;
 
 	pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
 
+	/*
+	 * We need to flush all unwritten data before we can send the
+	 * copychunk ioctl to the server.
+	 */
+	inode = d_inode(trgtfile->dentry);
+	filemap_write_and_wait(inode->i_mapping);
+
 	if (pcchunk == NULL)
 		return -ENOMEM;
 
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/15 drivers: net: hippi: Fix deadlock in rr_close()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]

There is a deadlock in rr_close(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | rr_open()
rr_close()                   |  add_timer()
 spin_lock_irqsave() //(1)   |  (wait a time)
 ...                         | rr_timer()
 del_timer_sync()            |  spin_lock_irqsave() //(2)
 (wait timer to stop)        |  ...

We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever.

This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.

---
 drivers/net/hippi/rrunner.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/hippi/rrunner.c +2 -0
index 7661dbb31162..50e4bea46d67 100644
@@ -1353,7 +1353,9 @@ static int rr_close(struct net_device *dev)
 
 	rrpriv->fw_running = 0;
 
+	spin_unlock_irqrestore(&rrpriv->lock, flags);
 	del_timer_sync(&rrpriv->timer);
+	spin_lock_irqsave(&rrpriv->lock, flags);
 
 	writel(0, &regs->TxPi);
 	writel(0, &regs->IpRxPi);
Signature · 1 line
2.35.1
author maintainer
#11 lore raw

PATCH 12/15 powerpc/perf: Fix 32bit compile

In reply to Sasha Levin

From: Alexey Kardashevskiy <[email protected]>

[ Upstream commit bb82c574691daf8f7fa9a160264d15c5804cb769 ]

The "read_bhrb" global symbol is only called under CONFIG_PPC64 of arch/powerpc/perf/core-book3s.c but it is compiled for both 32 and 64 bit anyway (and LLVM fails to link this on 32bit).

This fixes it by moving bhrb.o to obj64 targets.

---
 arch/powerpc/perf/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/perf/Makefile +2 -2
index 2f46e31c7612..4f53d0b97539 100644
@@ -3,11 +3,11 @@
 obj-y				+= callchain.o callchain_$(BITS).o perf_regs.o
 obj-$(CONFIG_COMPAT)		+= callchain_32.o
 
-obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o bhrb.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o \
 				   isa207-common.o power8-pmu.o power9-pmu.o \
-				   generic-compat-pmu.o power10-pmu.o
+				   generic-compat-pmu.o power10-pmu.o bhrb.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_PPC_POWERNV)	+= imc-pmu.o
Signature · 1 line
2.35.1
author maintainer
#12 lore raw

PATCH 13/15 ata: pata_marvell: Check the 'bmdma_addr' beforing reading

In reply to Sasha Levin

From: Zheyu Ma <[email protected]>

[ Upstream commit aafa9f958342db36c17ac2a7f1b841032c96feb4 ]

Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  <TASK>
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0
---
 drivers/ata/pata_marvell.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/ata/pata_marvell.c +2 -0
index 361597d14c56..d45a75bfc016 100644
@@ -83,6 +83,8 @@ static int marvell_cable_detect(struct ata_port *ap)
 	switch(ap->port_no)
 	{
 	case 0:
+		if (!ap->ioaddr.bmdma_addr)
+			return ATA_CBL_PATA_UNK;
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
 			return ATA_CBL_PATA40;
 		return ATA_CBL_PATA80;
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 14/15 selftest/vm: verify mmap addr in mremap_test

In reply to Sasha Levin

From: Sidhartha Kumar <[email protected]>

[ Upstream commit 9c85a9bae267f6b5e5e374d0d023bbbe9db096d3 ]

Avoid calling mmap with requested addresses that are less than the system's mmap_min_addr. When run as root, mmap returns EACCES when trying to map addresses < mmap_min_addr. This is not one of the error codes for the condition to retry the mmap in the test.

Rather than arbitrarily retrying on EACCES, don't attempt an mmap until addr > vm.mmap_min_addr.

Add a munmap call after an alignment check as the mappings are retained after the retry and can reach the vm.max_map_count sysctl.

---
 tools/testing/selftests/vm/mremap_test.c | 41 +++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
tools/testing/selftests/vm/mremap_test.c +40 -1
index 0624d1bd71b5..2b3b4f15185f 100644
@@ -6,6 +6,7 @@
 
 #include <errno.h>
 #include <stdlib.h>
+#include <stdio.h>
 #include <string.h>
 #include <sys/mman.h>
 #include <time.h>
@@ -64,6 +65,35 @@ enum {
 	.expect_failure = should_fail				\
 }
 
+/* Returns mmap_min_addr sysctl tunable from procfs */
+static unsigned long long get_mmap_min_addr(void)
+{
+	FILE *fp;
+	int n_matched;
+	static unsigned long long addr;
+
+	if (addr)
+		return addr;
+
+	fp = fopen("/proc/sys/vm/mmap_min_addr", "r");
+	if (fp == NULL) {
+		ksft_print_msg("Failed to open /proc/sys/vm/mmap_min_addr: %s\n",
+			strerror(errno));
+		exit(KSFT_SKIP);
+	}
+
+	n_matched = fscanf(fp, "%llu", &addr);
+	if (n_matched != 1) {
+		ksft_print_msg("Failed to read /proc/sys/vm/mmap_min_addr: %s\n",
+			strerror(errno));
+		fclose(fp);
+		exit(KSFT_SKIP);
+	}
+
+	fclose(fp);
+	return addr;
+}
+
 /*
  * Returns the start address of the mapping on success, else returns
  * NULL on failure.
@@ -72,8 +102,15 @@ static void *get_source_mapping(struct config c)
 {
 	unsigned long long addr = 0ULL;
 	void *src_addr = NULL;
+	unsigned long long mmap_min_addr;
+
+	mmap_min_addr = get_mmap_min_addr();
+
 retry:
 	addr += c.src_alignment;
+	if (addr < mmap_min_addr)
+		goto retry;
+
 	src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
 			MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
 			-1, 0);
@@ -91,8 +128,10 @@ static void *get_source_mapping(struct config c)
 	 * alignment in the tests.
 	 */
 	if (((unsigned long long) src_addr & (c.src_alignment - 1)) ||
-			!((unsigned long long) src_addr & c.src_alignment))
+			!((unsigned long long) src_addr & c.src_alignment)) {
+		munmap(src_addr, c.region_size);
 		goto retry;
+	}
 
 	if (!src_addr)
 		goto error;
Signature · 1 line
2.35.1
author maintainer
#14 lore raw

PATCH 15/15 selftest/vm: verify remap destination address in mremap_test

In reply to Sasha Levin

From: Sidhartha Kumar <[email protected]>

[ Upstream commit 18d609daa546c919fd36b62a7b510c18de4b4af8 ]

Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy existing mappings. This causes a segfault when regions such as text are remapped and the permissions are changed.

Verify the requested mremap destination address does not overlap any existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep incrementing the destination address until a valid mapping is found or fail the current test once the max address is reached.

---
 tools/testing/selftests/vm/mremap_test.c | 42 ++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 3 deletions(-)
tools/testing/selftests/vm/mremap_test.c +39 -3
index 2b3b4f15185f..e3ce33a9954e 100644
@@ -10,6 +10,7 @@
 #include <string.h>
 #include <sys/mman.h>
 #include <time.h>
+#include <stdbool.h>
 
 #include "../kselftest.h"
 
@@ -65,6 +66,30 @@ enum {
 	.expect_failure = should_fail				\
 }
 
+/*
+ * Returns false if the requested remap region overlaps with an
+ * existing mapping (e.g text, stack) else returns true.
+ */
+static bool is_remap_region_valid(void *addr, unsigned long long size)
+{
+	void *remap_addr = NULL;
+	bool ret = true;
+
+	/* Use MAP_FIXED_NOREPLACE flag to ensure region is not mapped */
+	remap_addr = mmap(addr, size, PROT_READ | PROT_WRITE,
+					 MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+					 -1, 0);
+
+	if (remap_addr == MAP_FAILED) {
+		if (errno == EEXIST)
+			ret = false;
+	} else {
+		munmap(remap_addr, size);
+	}
+
+	return ret;
+}
+
 /* Returns mmap_min_addr sysctl tunable from procfs */
 static unsigned long long get_mmap_min_addr(void)
 {
@@ -112,8 +137,8 @@ static void *get_source_mapping(struct config c)
 		goto retry;
 
 	src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE,
-			MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
-			-1, 0);
+					MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED,
+					-1, 0);
 	if (src_addr == MAP_FAILED) {
 		if (errno == EPERM || errno == EEXIST)
 			goto retry;
@@ -180,9 +205,20 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 	if (!((unsigned long long) addr & c.dest_alignment))
 		addr = (void *) ((unsigned long long) addr | c.dest_alignment);
 
+	/* Don't destroy existing mappings unless expected to overlap */
+	while (!is_remap_region_valid(addr, c.region_size) && !c.overlapping) {
+		/* Check for unsigned overflow */
+		if (addr + c.dest_alignment < addr) {
+			ksft_print_msg("Couldn't find a valid region to remap to\n");
+			ret = -1;
+			goto out;
+		}
+		addr += c.dest_alignment;
+	}
+
 	clock_gettime(CLOCK_MONOTONIC, &t_start);
 	dest_addr = mremap(src_addr, c.region_size, c.region_size,
-			MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr);
+					  MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr);
 	clock_gettime(CLOCK_MONOTONIC, &t_end);
 
 	if (dest_addr == MAP_FAILED) {
Signature · 1 line
2.35.1