arm64: dts: imx8mm: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC
The I2C2 has SMBus device SMSC USB2514Bi connected to it, the device is capable of up to 100 kHz operation. Reduce the bus frequency to 100 kHz to guarantee this I2C device can work correctly.
Fixes 583f24ae42a07 ("arm64: dts: imx8mm: Add support for Data Modul i.MX8M Mini eDM SBC")
Signed-off-by Marek Vasut <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Shawn Guo <[email protected]>
Cc NXP Linux Team <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +1 -1
@@ -392,7 +392,7 @@ ldo6_reg: LDO6 { &i2c2 { /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ - clock-frequency = <320000>; + clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>;
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 11 lines · Marek Vasut
The I2C2 has SMBus device SMSC USB2514Bi connected to it, the device is capable of up to 100 kHz operation. Reduce the bus frequency to 100 kHz to guarantee this I2C device can work correctly.
Fixes 583f24ae42a07 ("arm64: dts: imx8mm: Add support for Data Modul i.MX8M Mini eDM SBC")Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Shawn Guo <[email protected]>Cc NXP Linux Team <[email protected]>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel