Skip to contentSkip to conversation

ddr: altera: Ignore bit[7-4] for both seq2core & core2seq handshake in HPS

PATCH New [email protected] 1 participant 1 message Apr 27, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ddr: altera: Ignore bit[7-4] for both seq2core & core2seq handshake in HPS

From: Tien Fong Chee <[email protected]>

Bit[7-4] for both register seq2core and core2seq handshake in HPS are not required for triggering DDR re-calibration or resetting EMIF. So, ignoring these bits just for playing it safe.

---
 drivers/ddr/altera/sdram_soc64.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ddr/altera/sdram_soc64.h +1 -1
index 7460f8c220..07a0f9f2ae 100644
@@ -53,7 +53,7 @@ struct altera_sdram_plat {
 #define DDR_HMC_INTSTAT_DERRPENA_SET_MSK	BIT(1)
 #define DDR_HMC_INTSTAT_ADDRMTCFLG_SET_MSK	BIT(16)
 #define DDR_HMC_INTMODE_INTMODE_SET_MSK		BIT(0)
-#define DDR_HMC_RSTHANDSHAKE_MASK		0x000000ff
+#define DDR_HMC_RSTHANDSHAKE_MASK		0x0000000f
 #define DDR_HMC_CORE2SEQ_INT_REQ		0xF
 #define DDR_HMC_SEQ2CORE_INT_RESP_MASK		BIT(3)
 #define DDR_HMC_HPSINTFCSEL_ENABLE_MASK		0x001f1f1f
Signature · 1 line
2.19.0