Skip to contentSkip to conversation

asus-ec-sensors: add support for board families

PATCH In review Eugene Shalygin 2 participants 10 messages Apr 27, 2022

Subsystems (3)
lore
Share & tools
lore

Eugene Shalygin

author maintainer
#0 lore raw

v3 cover asus-ec-sensors: add support for board families

Users provided information for boards from AMD-400 and sTRX40 families and demonstrated that sensor addresses differ from those for the AMD-500 family. Also the AMD-400 family board uses the global ACPI lock instead of a dedicated mutex to guard access to the hardware.

This patchset implements required changes to support other board families:
- per-family sensor definitions
- options to choose hardware/state guard mutex: an AML mutex or the global ACPI lock.

These changes are used to add support for the PRIME X470-PRO board.

Changes in
v3:
- Added family_unknown member to the board_family enum to ensure the default value of 0 is not a valid family value.
- Added a note explaining why module_platform_driver_probe() is chosen over module_platform_driver().

v2:
- Removed the case without ACPI mutex where the state was guarded using the normal mutex. After receiving an update from user that case turned out to be non-existent.
- Removed the __initconst attribute from the board data array.
- Updated documentation to include the special string for the mutex path module parameters which make the driver use the global ACPI lock.

Eugene Shalygin (4):
hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data
hwmon: (asus-ec-sensors) implement locking via the ACPI global lock
hwmon: (asus-ec-sensors) add support for board families
hwmon: (asus-ec-sensors) add PRIME X470-PRO board

 Documentation/hwmon/asus_ec_sensors.rst |   2 +
 drivers/hwmon/asus-ec-sensors.c         | 420 +++++++++++++++++-------
 2 files changed, 302 insertions(+), 120 deletions(-)
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH v3 1/4 hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data

We need to keep some more information about the current board than just the sensors set, and with more boards to add the dmi id array grows quickly. Our probe code is always the same so let's switch to a custom test code and a custom board info array. That allows us to omit board vendor string (ASUS uses two strings that differ in case) in the board info and use case-insensitive comparison, and also do not duplicate sensor definitions for such board variants as " (WI-FI)" when sensors are identical to the base variant.

Also saves a quarter of the module size by replacing big dmi_system_id structs with smaller ones.

---
 drivers/hwmon/asus-ec-sensors.c | 212 ++++++++++++++++++--------------
 1 file changed, 123 insertions(+), 89 deletions(-)
drivers/hwmon/asus-ec-sensors.c +123 -89
index e3d794fb0534..0c82723f85b5 100644
@@ -54,8 +54,7 @@ static char *mutex_path_override;
 /* ACPI mutex for locking access to the EC for the firmware */
 #define ASUS_HW_ACCESS_MUTEX_ASMX	"\\AMW0.ASMX"
 
-/* There are two variants of the vendor spelling */
-#define VENDOR_ASUS_UPPER_CASE	"ASUSTeK COMPUTER INC."
+#define MAX_IDENTICAL_BOARD_VARIATIONS	2
 
 typedef union {
 	u32 value;
@@ -164,74 +163,94 @@ static const struct ec_sensor_info known_ec_sensors[] = {
 	(SENSOR_TEMP_CHIPSET | SENSOR_TEMP_CPU | SENSOR_TEMP_MB)
 #define SENSOR_SET_TEMP_WATER (SENSOR_TEMP_WATER_IN | SENSOR_TEMP_WATER_OUT)
 
-#define DMI_EXACT_MATCH_BOARD(vendor, name, sensors) {                         \
-	.matches = {                                                           \
-		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, vendor),                     \
-		DMI_EXACT_MATCH(DMI_BOARD_NAME, name),                         \
-	},                                                                     \
-	.driver_data = (void *)(sensors), \
-}
+struct ec_board_info {
+	const char *board_names[MAX_IDENTICAL_BOARD_VARIATIONS];
+	unsigned long sensors;
+};
 
-static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "PRIME X570-PRO",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
-		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
-			      "ProArt X570-CREATOR WIFI",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
-		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CPU_OPT |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "Pro WS X570-ACE",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
-		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
-			      "ROG CROSSHAIR VIII DARK HERO",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
-		SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
-			      "ROG CROSSHAIR VIII FORMULA",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG CROSSHAIR VIII HERO",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
-		SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
-		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
-			      "ROG CROSSHAIR VIII HERO (WI-FI)",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
-		SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
-		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
-			      "ROG CROSSHAIR VIII IMPACT",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-E GAMING",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
-		SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_FAN_CPU_OPT),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-I GAMING",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
-		SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_FAN_VRM_HS |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-E GAMING",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
-		SENSOR_TEMP_T_SENSOR |
-		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
-		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-F GAMING",
-		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
-		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
-	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-I GAMING",
-		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
-		SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
+static const struct ec_board_info board_info[] = {
+	{
+		.board_names = {"PRIME X570-PRO"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
+			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET,
+	},
+	{
+		.board_names = {"ProArt X570-CREATOR WIFI"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
+			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CPU_OPT |
+			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"Pro WS X570-ACE"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
+			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET |
+			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG CROSSHAIR VIII DARK HERO"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR |
+			SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+			SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW |
+			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG CROSSHAIR VIII FORMULA"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
+			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {
+			"ROG CROSSHAIR VIII HERO",
+			"ROG CROSSHAIR VIII HERO (WI-FI)",
+		},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR |
+			SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+			SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
+			SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU |
+			SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG CROSSHAIR VIII IMPACT"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
+			SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG STRIX B550-E GAMING"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_CPU_OPT,
+	},
+	{
+		.board_names = {"ROG STRIX B550-I GAMING"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_VRM_HS | SENSOR_CURR_CPU |
+			SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG STRIX X570-E GAMING"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
+			SENSOR_IN_CPU_CORE,
+	},
+	{
+		.board_names = {"ROG STRIX X570-F GAMING"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET,
+	},
+	{
+		.board_names = {"ROG STRIX X570-I GAMING"},
+		.sensors = SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
+			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
+			SENSOR_IN_CPU_CORE,
+	},
 	{}
 };
 
@@ -241,7 +260,7 @@ struct ec_sensor {
 };
 
 struct ec_sensors_data {
-	unsigned long board_sensors;
+	const struct ec_board_info *board_info;
 	struct ec_sensor *sensors;
 	/* EC registers to read from */
 	u16 *registers;
@@ -307,11 +326,6 @@ static int __init bank_compare(const void *a, const void *b)
 	return *((const s8 *)a) - *((const s8 *)b);
 }
 
-static int __init board_sensors_count(unsigned long sensors)
-{
-	return hweight_long(sensors);
-}
-
 static void __init setup_sensor_data(struct ec_sensors_data *ec)
 {
 	struct ec_sensor *s = ec->sensors;
@@ -322,8 +336,8 @@ static void __init setup_sensor_data(struct ec_sensors_data *ec)
 	ec->nr_banks = 0;
 	ec->nr_registers = 0;
 
-	for_each_set_bit(i, &ec->board_sensors,
-			  BITS_PER_TYPE(ec->board_sensors)) {
+	for_each_set_bit(i, &ec->board_info->sensors,
+			 BITS_PER_TYPE(ec->board_info->sensors)) {
 		s->info_index = i;
 		s->cached_value = 0;
 		ec->nr_registers +=
@@ -463,9 +477,10 @@ static inline s32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
 static void update_sensor_values(struct ec_sensors_data *ec, u8 *data)
 {
 	const struct ec_sensor_info *si;
-	struct ec_sensor *s;
+	struct ec_sensor *s, *sensor_end;
 
-	for (s = ec->sensors; s != ec->sensors + ec->nr_sensors; s++) {
+	sensor_end = ec->sensors + ec->nr_sensors;
+	for (s = ec->sensors; s != sensor_end; s++) {
 		si = &known_ec_sensors[s->info_index];
 		s->cached_value = get_sensor_value(si, data);
 		data += si->addr.components.size;
@@ -603,12 +618,24 @@ static struct hwmon_chip_info asus_ec_chip_info = {
 	.ops = &asus_ec_hwmon_ops,
 };
 
-static unsigned long __init get_board_sensors(void)
+static const struct ec_board_info * __init get_board_info(void)
 {
-	const struct dmi_system_id *dmi_entry =
-		dmi_first_match(asus_ec_dmi_table);
+	const char *dmi_board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	const char *dmi_board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	const struct ec_board_info *board;
 
-	return dmi_entry ? (unsigned long)dmi_entry->driver_data : 0;
+	if (!dmi_board_vendor || !dmi_board_name ||
+	    strcasecmp(dmi_board_vendor, "ASUSTeK COMPUTER INC."))
+		return NULL;
+
+	for (board = board_info; board->sensors; board++) {
+		if (match_string(board->board_names,
+				 MAX_IDENTICAL_BOARD_VARIATIONS,
+				 dmi_board_name) >= 0)
+			return board;
+	}
+
+	return NULL;
 }
 
 static int __init asus_ec_probe(struct platform_device *pdev)
@@ -616,17 +643,17 @@ static int __init asus_ec_probe(struct platform_device *pdev)
 	const struct hwmon_channel_info **ptr_asus_ec_ci;
 	int nr_count[hwmon_max] = { 0 }, nr_types = 0;
 	struct hwmon_channel_info *asus_ec_hwmon_chan;
+	const struct ec_board_info *pboard_info;
 	const struct hwmon_chip_info *chip_info;
 	struct device *dev = &pdev->dev;
 	struct ec_sensors_data *ec_data;
 	const struct ec_sensor_info *si;
 	enum hwmon_sensor_types type;
-	unsigned long board_sensors;
 	struct device *hwdev;
 	unsigned int i;
 
-	board_sensors = get_board_sensors();
-	if (!board_sensors)
+	pboard_info = get_board_info();
+	if (!pboard_info)
 		return -ENODEV;
 
 	ec_data = devm_kzalloc(dev, sizeof(struct ec_sensors_data),
@@ -635,8 +662,8 @@ static int __init asus_ec_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dev_set_drvdata(dev, ec_data);
-	ec_data->board_sensors = board_sensors;
-	ec_data->nr_sensors = board_sensors_count(ec_data->board_sensors);
+	ec_data->board_info = pboard_info;
+	ec_data->nr_sensors = hweight_long(ec_data->board_info->sensors);
 	ec_data->sensors = devm_kcalloc(dev, ec_data->nr_sensors,
 					sizeof(struct ec_sensor), GFP_KERNEL);
 
@@ -709,7 +736,14 @@ static struct platform_driver asus_ec_sensors_platform_driver = {
 	},
 };
 
-MODULE_DEVICE_TABLE(dmi, asus_ec_dmi_table);
+MODULE_DEVICE_TABLE(acpi, acpi_ec_ids);
+/*
+ * we use module_platform_driver_probe() rather than module_platform_driver()
+ * because the probe function (and its dependants) are marked with __init, which
+ * means we can't put it into the .probe member of the platform_driver struct
+ * above, and we can't mark the asus_ec_sensors_platform_driver object as __init
+ * because the object is referenced from the module exit code.
+ */
 module_platform_driver_probe(asus_ec_sensors_platform_driver, asus_ec_probe);
 
 module_param_named(mutex_path, mutex_path_override, charp, 0);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH v3 2/4 hwmon: (asus-ec-sensors) implement locking via the ACPI global lock

In reply to Eugene Shalygin

For some board models ASUS uses the global ACPI lock to guard access to the hardware, so do we.

---
 Documentation/hwmon/asus_ec_sensors.rst |   2 +
 drivers/hwmon/asus-ec-sensors.c         | 125 +++++++++++++++++++-----
 2 files changed, 101 insertions(+), 26 deletions(-)
Documentation/hwmon/asus_ec_sensors.rst +2 -0
index b3469851ab9a..36ca531d32dd 100644
@@ -53,3 +53,5 @@ Module Parameters
 		the path is mostly identical for them). If ASUS changes this path
 		in a future BIOS update, this parameter can be used to override
 		the stored in the driver value until it gets updated.
+		A special string ":GLOBAL_LOCK" can be passed to use the ACPI
+		global lock instead of a dedicated mutex.
drivers/hwmon/asus-ec-sensors.c +99 -26

257 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH v3 3/4 hwmon: (asus-ec-sensors) add support for board families

In reply to Eugene Shalygin

DSDT code for AMD 400-series chipset shows that sensor addresses differ for this generation from those for the AMD 500-series boards.

---
 drivers/hwmon/asus-ec-sensors.c | 40 ++++++++++++++++++++++++++++-----
 1 file changed, 35 insertions(+), 5 deletions(-)
drivers/hwmon/asus-ec-sensors.c +35 -5
index 581df4053060..109c3920d77c 100644
@@ -135,8 +135,13 @@ enum ec_sensors {
 #define SENSOR_TEMP_WATER_IN BIT(ec_sensor_temp_water_in)
 #define SENSOR_TEMP_WATER_OUT BIT(ec_sensor_temp_water_out)
 
+enum board_family {
+	family_unknown,
+	family_amd_500_series,
+};
+
 /* All the known sensors for ASUS EC controllers */
-static const struct ec_sensor_info known_ec_sensors[] = {
+static const struct ec_sensor_info sensors_family_amd_500[] = {
 	[ec_sensor_temp_chipset] =
 		EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
 	[ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
@@ -177,6 +182,7 @@ struct ec_board_info {
 	 * the hardware is not guarded.
 	 */
 	const char *mutex_path;
+	enum board_family family;
 };
 
 static const struct ec_board_info board_info[] = {
@@ -185,6 +191,7 @@ static const struct ec_board_info board_info[] = {
 		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
 			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ProArt X570-CREATOR WIFI"},
@@ -198,6 +205,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET |
 			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG CROSSHAIR VIII DARK HERO"},
@@ -207,6 +215,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW |
 			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG CROSSHAIR VIII FORMULA"},
@@ -215,6 +224,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
 			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {
@@ -228,6 +238,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU |
 			SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG CROSSHAIR VIII IMPACT"},
@@ -236,6 +247,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
 			SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG STRIX B550-E GAMING"},
@@ -243,6 +255,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
 			SENSOR_FAN_CPU_OPT,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG STRIX B550-I GAMING"},
@@ -251,6 +264,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_VRM_HS | SENSOR_CURR_CPU |
 			SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG STRIX X570-E GAMING"},
@@ -259,12 +273,14 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
 			SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG STRIX X570-F GAMING"},
 		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
 			SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{
 		.board_names = {"ROG STRIX X570-I GAMING"},
@@ -272,6 +288,7 @@ static const struct ec_board_info board_info[] = {
 			SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU |
 			SENSOR_IN_CPU_CORE,
 		.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+		.family = family_amd_500_series,
 	},
 	{}
 };
@@ -323,6 +340,7 @@ static bool unlock_global_acpi_lock(struct lock_data *data)
 
 struct ec_sensors_data {
 	const struct ec_board_info *board_info;
+	const struct ec_sensor_info *sensors_info;
 	struct ec_sensor *sensors;
 	/* EC registers to read from */
 	u16 *registers;
@@ -365,7 +383,7 @@ static bool is_sensor_data_signed(const struct ec_sensor_info *si)
 static const struct ec_sensor_info *
 get_sensor_info(const struct ec_sensors_data *state, int index)
 {
-	return &known_ec_sensors[state->sensors[index].info_index];
+	return state->sensors_info + state->sensors[index].info_index;
 }
 
 static int find_ec_sensor_index(const struct ec_sensors_data *ec,
@@ -403,9 +421,9 @@ static void __init setup_sensor_data(struct ec_sensors_data *ec)
 		s->info_index = i;
 		s->cached_value = 0;
 		ec->nr_registers +=
-			known_ec_sensors[s->info_index].addr.components.size;
+			ec->sensors_info[s->info_index].addr.components.size;
 		bank_found = false;
-		bank = known_ec_sensors[s->info_index].addr.components.bank;
+		bank = ec->sensors_info[s->info_index].addr.components.bank;
 		for (j = 0; j < ec->nr_banks; j++) {
 			if (ec->banks[j] == bank) {
 				bank_found = true;
@@ -556,7 +574,7 @@ static void update_sensor_values(struct ec_sensors_data *ec, u8 *data)
 
 	sensor_end = ec->sensors + ec->nr_sensors;
 	for (s = ec->sensors; s != sensor_end; s++) {
-		si = &known_ec_sensors[s->info_index];
+		si = ec->sensors_info + s->info_index;
 		s->cached_value = get_sensor_value(si, data);
 		data += si->addr.components.size;
 	}
@@ -733,6 +751,17 @@ static int __init asus_ec_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, ec_data);
 	ec_data->board_info = pboard_info;
+
+	switch (ec_data->board_info->family) {
+	case family_amd_500_series:
+		ec_data->sensors_info = sensors_family_amd_500;
+		break;
+	default:
+		dev_err(dev, "Unknown board family: %d",
+			ec_data->board_info->family);
+		return -EINVAL;
+	}
+
 	ec_data->nr_sensors = hweight_long(ec_data->board_info->sensors);
 	ec_data->sensors = devm_kcalloc(dev, ec_data->nr_sensors,
 					sizeof(struct ec_sensor), GFP_KERNEL);
@@ -742,6 +771,7 @@ static int __init asus_ec_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to setup state/EC locking: %d", status);
 		return status;
 	}
+
 	setup_sensor_data(ec_data);
 	ec_data->registers = devm_kcalloc(dev, ec_data->nr_registers,
 					  sizeof(u16), GFP_KERNEL);
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH v3 4/4 hwmon: (asus-ec-sensors) add PRIME X470-PRO board

In reply to Eugene Shalygin

This board is supposed to be handled by the asus-wmi-sensors driver, but due to a buggy WMI implementation the driver and the official ASUS software make the BIOS hang together with fan controls [1, 2].

This driver complements values provided by the SIO chip and does not freeze the BIOS, as tested by a user [2].

[1] https://github.com/electrified/asus-wmi-sensors/blob/master/README.md
[2] https://github.com/zeule/asus-ec-sensors/issues/12

---
 drivers/hwmon/asus-ec-sensors.c | 43 +++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
drivers/hwmon/asus-ec-sensors.c +43 -0
index 109c3920d77c..998d49d6b799 100644
@@ -137,10 +137,41 @@ enum ec_sensors {
 
 enum board_family {
 	family_unknown,
+	family_amd_400_series,
 	family_amd_500_series,
 };
 
 /* All the known sensors for ASUS EC controllers */
+static const struct ec_sensor_info sensors_family_amd_400[] = {
+	[ec_sensor_temp_chipset] =
+		EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+	[ec_sensor_temp_cpu] =
+		EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+	[ec_sensor_temp_mb] =
+		EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+	[ec_sensor_temp_t_sensor] =
+		EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+	[ec_sensor_temp_vrm] =
+		EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+	[ec_sensor_in_cpu_core] =
+		EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
+	[ec_sensor_fan_cpu_opt] =
+		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
+	[ec_sensor_fan_vrm_hs] =
+		EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+	[ec_sensor_fan_chipset] =
+		/* no chipset fans in this generation */
+		EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00),
+	[ec_sensor_fan_water_flow] =
+		EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4),
+	[ec_sensor_curr_cpu] =
+		EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
+	[ec_sensor_temp_water_in] =
+		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
+	[ec_sensor_temp_water_out] =
+		EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b),
+};
+
 static const struct ec_sensor_info sensors_family_amd_500[] = {
 	[ec_sensor_temp_chipset] =
 		EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
@@ -186,6 +217,15 @@ struct ec_board_info {
 };
 
 static const struct ec_board_info board_info[] = {
+	{
+		.board_names = {"PRIME X470-PRO"},
+		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+			SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+			SENSOR_FAN_CPU_OPT |
+			SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+		.mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH,
+		.family = family_amd_400_series,
+	},
 	{
 		.board_names = {"PRIME X570-PRO"},
 		.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
@@ -753,6 +793,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
 	ec_data->board_info = pboard_info;
 
 	switch (ec_data->board_info->family) {
+	case family_amd_400_series:
+		ec_data->sensors_info = sensors_family_amd_400;
+		break;
 	case family_amd_500_series:
 		ec_data->sensors_info = sensors_family_amd_500;
 		break;
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

Re: [PATCH v3 4/4] hwmon: (asus-ec-sensors) add PRIME X470-PRO board

Günter,

I forgot to add PRIME X470-PRO to the list of supported boards in Documentation/hwmon/asus_ec_sensors.rst. Could you, please, add that? It should be the first entry. Commit 8f8db4b5d10cc4a2a801514e677dd5205651b771. Or should I resend this patch?

Thank you,
Eugene

Quoted 91 lines · Eugene Shalygin

This board is supposed to be handled by the asus-wmi-sensors driver, but due to a buggy WMI implementation the driver and the official ASUS software make the BIOS hang together with fan controls [1, 2].

This driver complements values provided by the SIO chip and does not freeze the BIOS, as tested by a user [2].

[1] https://github.com/electrified/asus-wmi-sensors/blob/master/README.md
[2] https://github.com/zeule/asus-ec-sensors/issues/12

---
 drivers/hwmon/asus-ec-sensors.c | 43 +++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
drivers/hwmon/asus-ec-sensors.c +43 -1
index 109c3920d77c..998d49d6b799 100644
@@ -137,10 +137,41 @@ enum ec_sensors {
 
 enum board_family {
        family_unknown,
+       family_amd_400_series,
        family_amd_500_series,
 };
 
 /* All the known sensors for ASUS EC controllers */
+static const struct ec_sensor_info sensors_family_amd_400[] = {
+       [ec_sensor_temp_chipset] =
+               EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+       [ec_sensor_temp_cpu] =
+               EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+       [ec_sensor_temp_mb] =
+               EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+       [ec_sensor_temp_t_sensor] =
+               EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+       [ec_sensor_temp_vrm] =
+               EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+       [ec_sensor_in_cpu_core] =
+               EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
+       [ec_sensor_fan_cpu_opt] =
+               EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
+       [ec_sensor_fan_vrm_hs] =
+               EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+       [ec_sensor_fan_chipset] =
+               /* no chipset fans in this generation */
+               EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00),
+       [ec_sensor_fan_water_flow] =
+               EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4),
+       [ec_sensor_curr_cpu] =
+               EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
+       [ec_sensor_temp_water_in] =
+               EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
+       [ec_sensor_temp_water_out] =
+               EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b),
+};
+
 static const struct ec_sensor_info sensors_family_amd_500[] = {
        [ec_sensor_temp_chipset] =
                EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
@@ -186,6 +217,15 @@ struct ec_board_info {
 };
 
 static const struct ec_board_info board_info[] = {
+       {
+               .board_names = {"PRIME X470-PRO"},
+               .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+                       SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM |
+                       SENSOR_FAN_CPU_OPT |
+                       SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE,
+               .mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH,
+               .family = family_amd_400_series,
+       },
        {
                .board_names = {"PRIME X570-PRO"},
                .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
@@ -753,6 +793,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
        ec_data->board_info = pboard_info;
 
        switch (ec_data->board_info->family) {
+       case family_amd_400_series:
+               ec_data->sensors_info = sensors_family_amd_400;
+               break;
        case family_amd_500_series:
                ec_data->sensors_info = sensors_family_amd_500;
                break;
--

2.35.1

maintainer
#6 lore raw

Re: [PATCH v3 4/4] hwmon: (asus-ec-sensors) add PRIME X470-PRO board

Quoted 8 lines · Eugene Shalygin

Günter,

I forgot to add PRIME X470-PRO to the list of supported boards in Documentation/hwmon/asus_ec_sensors.rst. Could you, please, add that? It should be the first entry. Commit 8f8db4b5d10cc4a2a801514e677dd5205651b771. Or should I resend this patch?

Just send a follow-up patch.

Guenter

maintainer
#7 lore raw

Re: [PATCH v3 4/4] hwmon: (asus-ec-sensors) add PRIME X470-PRO board

In reply to Eugene Shalygin
Quoted 8 lines · Eugene Shalygin

Günter,

I forgot to add PRIME X470-PRO to the list of supported boards in Documentation/hwmon/asus_ec_sensors.rst. Could you, please, add that? It should be the first entry. Commit 8f8db4b5d10cc4a2a801514e677dd5205651b771. Or should I resend this patch?

In this context: Your e-mails always include the following header:

To: unlisted-recipients:; (no To-header on input)

If I forget to remove it in a reply, this causes a rejection of the reply by the mailing list and may trigger anti-spam filters. Please fix your e-mail system/configuration to avoid that.

Thanks,
Guenter

maintainer
#8 lore raw
In reply to Eugene Shalygin
Quoted 5 lines · Eugene Shalygin

Users provided information for boards from AMD-400 and sTRX40 families and demonstrated that sensor addresses differ from those for the AMD-500 family. Also the AMD-400 family board uses the global ACPI lock instead of a dedicated mutex to guard access to the hardware.

Quoted 8 lines

This patchset implements required changes to support other board families:
- per-family sensor definitions
- options to choose hardware/state guard mutex: an AML mutex or the global ACPI lock.

These changes are used to add support for the PRIME X470-PRO board.

Series applied to hwmon-next.

Thanks,
Guenter

Quoted 27 lines

Changes in
v3:
- Added family_unknown member to the board_family enum to ensure the default value of 0 is not a valid family value.
- Added a note explaining why module_platform_driver_probe() is chosen over module_platform_driver().

v2:
- Removed the case without ACPI mutex where the state was guarded using the normal mutex. After receiving an update from user that case turned out to be non-existent.
- Removed the __initconst attribute from the board data array.
- Updated documentation to include the special string for the mutex path module parameters which make the driver use the global ACPI lock.

Eugene Shalygin (4):
hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data
hwmon: (asus-ec-sensors) implement locking via the ACPI global lock
hwmon: (asus-ec-sensors) add support for board families
hwmon: (asus-ec-sensors) add PRIME X470-PRO board

  Documentation/hwmon/asus_ec_sensors.rst |   2 +
  drivers/hwmon/asus-ec-sensors.c         | 420 +++++++++++++++++-------
  2 files changed, 302 insertions(+), 120 deletions(-)
author maintainer
#9 lore raw

Thank you, Günter!

Quoted 1 line

Series applied to hwmon-next.