Skip to contentSkip to conversation

bosch: Add initial board support for ACC

PATCH Superseded Philip Oberfichtner 1 participant 1 message Apr 29, 2022

Subsystems (3)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 bosch: Add initial board support for ACC

The Bosch ACC (Air Center Control) Board is based on the i.MX6D.

---

Changes in v5:
- Rebase on v2022.07-rc1
- Sync device tree with Linux

Changes in v4:
- Remove obsolete CONFIG_FEC #defines
- Sync device tree with Linux

Changes in v3:
- Rename acc to bosch-acc
- Sync device tree with Linux

Changes in v2:
- Adapt defconfig and device tree to new bootcount driver
- Clean up CONFIG_ENV_FLAGS_LIST_STATIC
- Fix style issues in device trees
- Migrate CONFIG options to Kconfig

This board supports depends on:
- "crypto/fsl: Fallback to SW sha1/256 is misaligned buffers", patchwork id 270524
- Linux Device Tree patch, see below

The Device Tree is currently being mainlined into Linux. The DT in this board support patch will be kept in sync as the DT patch for Linux evolves. The Linux patch is tracked under
https://lore.kernel.org/linux-devicetree/[email protected]/

The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version.

---
 arch/arm/dts/Makefile                    |   1 +
 arch/arm/dts/imx6q-bosch-acc-u-boot.dtsi |  80 +++
 arch/arm/dts/imx6q-bosch-acc.dts         | 773 +++++++++++++++++++++++
 arch/arm/mach-imx/mx6/Kconfig            |  15 +
 board/bosch/acc/Kconfig                  |  19 +
 board/bosch/acc/MAINTAINERS              |   9 +
 board/bosch/acc/Makefile                 |   6 +
 board/bosch/acc/acc.c                    | 755 ++++++++++++++++++++++
 configs/imx6q_bosch_acc_defconfig        | 110 ++++
 include/configs/imx6q-bosch-acc.h        | 122 ++++
 10 files changed, 1890 insertions(+)
 create mode 100644 arch/arm/dts/imx6q-bosch-acc-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-bosch-acc.dts
 create mode 100644 board/bosch/acc/Kconfig
 create mode 100644 board/bosch/acc/MAINTAINERS
 create mode 100644 board/bosch/acc/Makefile
 create mode 100644 board/bosch/acc/acc.c
 create mode 100644 configs/imx6q_bosch_acc_defconfig
 create mode 100644 include/configs/imx6q-bosch-acc.h
arch/arm/dts/Makefile +1 -0
index 1032ce4c85..a24ac93258 100644
@@ -777,6 +777,7 @@ endif
 ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
 dtb-y += \
 	imx6-apalis.dtb \
+	imx6q-bosch-acc.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
 	imx6q-cubox-i-emmc-som-v15.dtb \
arch/arm/dts/imx6q-bosch-acc-u-boot.dtsi new file +80 -0

80 lines not on this page · raw message

arch/arm/dts/imx6q-bosch-acc.dts new file +773 -0

773 lines not on this page · raw message

arch/arm/mach-imx/mx6/Kconfig +15 -0
index 947b73fab2..eceb730856 100644
@@ -347,6 +347,20 @@ config TARGET_MX6Q_ENGICAM
 	select SUPPORT_SPL
 	imply CMD_DM
 
+config TARGET_MX6Q_ACC
+	bool "Support for Bosch ACC board"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select OF_CONTROL
+	select SPL_OF_LIBFDT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 config TARGET_MX6SABREAUTO
 	bool "mx6sabreauto"
 	depends on MX6QDL
@@ -686,6 +700,7 @@ source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/mx6sxsabreauto/Kconfig"
 source "board/freescale/mx6ul_14x14_evk/Kconfig"
 source "board/freescale/mx6ullevk/Kconfig"
+source "board/bosch/acc/Kconfig"
 source "board/grinn/liteboard/Kconfig"
 source "board/phytec/pcm058/Kconfig"
 source "board/phytec/pcl063/Kconfig"
board/bosch/acc/Kconfig new file +19 -0
new file mode 100644
index 0000000000..da54d96e40
@@ -0,0 +1,19 @@
+if TARGET_MX6Q_ACC
+
+config SYS_VENDOR
+	default "bosch"
+
+config SYS_BOARD
+	default "acc"
+
+config SYS_CONFIG_NAME
+	default "imx6q-bosch-acc"
+
+config SYS_BOOT_EMMC
+	bool "Boot from EMMC"
+	default y
+	help
+	  Say N here if you want to boot from SD card or microUSB.
+	  Say Y to boot from eMMC.
+
+endif
board/bosch/acc/MAINTAINERS new file +9 -0
new file mode 100644
index 0000000000..1b88003712
@@ -0,0 +1,9 @@
+MX6Q_ACC
+M:	Matthias Winker <[email protected]>
+M:	Philip Oberfichtner <[email protected]>
+S:	Maintained
+F:	board/bosch/acc
+F:	include/configs/imx6q-bosch-acc.h
+F:	configs/imx6q_bosch_acc_defconfig
+F:	arch/arm/dts/imx6q-bosch-acc.dts
+F:	arch/arm/dts/imx6q-bosch-acc-u-boot.dts
board/bosch/acc/Makefile new file +6 -0
new file mode 100644
index 0000000000..d425a677bc
@@ -0,0 +1,6 @@
+# Copyright (C) 2017
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := acc.o
board/bosch/acc/acc.c new file +755 -0

755 lines not on this page · raw message

configs/imx6q_bosch_acc_defconfig new file +110 -0

110 lines not on this page · raw message

include/configs/imx6q-bosch-acc.h new file +122 -0

122 lines not on this page · raw message

Signature · 1 line
2.34.1