Skip to contentSkip to conversation

add support for Renesas RZ/N1 ethernet subsystem devices

PATCH Superseded Clément Léger 4 participants 23 messages Apr 29, 2022 – May 3, 2022

Subsystems (6)

v2 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Clément Léger

author maintainer
#0 lore raw

v2 cover add support for Renesas RZ/N1 ethernet subsystem devices

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

-----

Changes in V2:
- PCS:
- Fix Reverse Christmas tree declaration
- Removed stray newline
- Add PCS remove function and disable clocks in them
- Fix miic_validate function to return correct values
- Split PCS CONV_MODE definition
- Reordered phylink_pcs_ops in definition order
- Remove interface setting in miic_link_up
- Remove useless checks for invalid interface/speed and error prints
- Replace phylink_pcs_to_miic_port macro by a static function
- Add comment in miic_probe about platform_set_drvdata
- Bindings:
- Fix wrong path for mdio.yaml $ref
- Fix yamllint errors
- Tag driver:
- Squashed commit that added tag value with tag driver
- Add BUILD_BUG_ON for tag size
- Split control_data2 in 2 16bits values
- Switch:
- Use .phylink_get_caps instead of .phylink_validate and fill supported_interface correctly
- Use fixed size (ETH_GSTRING_LEN) string for stats and use memcpy
- Remove stats access locking since RTNL lock is used in upper layers
- Check for non C45 addresses in mdio_read/write and return -EOPNOTSUPP
- Add get_eth_mac_stats, get_eth_mac_ctrl_stat, get_rmon_stats
- Fix a few indentation problems
- Remove reset callback from MDIO bus operation
- Add phy/mac/rmon stats
- Add get_rmon_stat to dsa_ops

Clément Léger (12):
net: dsa: add support for ethtool get_rmon_stats()
net: dsa: add Renesas RZ/N1 switch tag driver
dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter
net: pcs: add Renesas MII converter driver
dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port
switch
net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver
net: dsa: rzn1-a5psw: add statistics support
net: dsa: rzn1-a5psw: add FDB support
ARM: dts: r9a06g032: describe MII converter
ARM: dts: r9a06g032: describe GMAC2
ARM: dts: r9a06g032: describe switch
MAINTAINERS: add Renesas RZ/N1 switch related driver entry

 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  132 +++
 .../bindings/net/pcs/renesas,rzn1-miic.yaml   |  157 +++
 MAINTAINERS                                   |   11 +
 arch/arm/boot/dts/r9a06g032.dtsi              |   63 +
 drivers/net/dsa/Kconfig                       |    9 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/rzn1_a5psw.c                  | 1055 +++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h                  |  259 ++++
 drivers/net/pcs/Kconfig                       |    7 +
 drivers/net/pcs/Makefile                      |    1 +
 drivers/net/pcs/pcs-rzn1-miic.c               |  508 ++++++++
 include/dt-bindings/net/pcs-rzn1-miic.h       |   33 +
 include/linux/pcs-rzn1-miic.h                 |   18 +
 include/net/dsa.h                             |    5 +
 net/dsa/Kconfig                               |    7 +
 net/dsa/Makefile                              |    1 +
 net/dsa/slave.c                               |   13 +
 net/dsa/tag_rzn1_a5psw.c                      |  114 ++
 18 files changed, 2394 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
 create mode 100644 Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
 create mode 100644 drivers/net/dsa/rzn1_a5psw.c
 create mode 100644 drivers/net/dsa/rzn1_a5psw.h
 create mode 100644 drivers/net/pcs/pcs-rzn1-miic.c
 create mode 100644 include/dt-bindings/net/pcs-rzn1-miic.h
 create mode 100644 include/linux/pcs-rzn1-miic.h
 create mode 100644 net/dsa/tag_rzn1_a5psw.c
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH v2 1/12 net: dsa: add support for ethtool get_rmon_stats()

Add support to allow dsa drivers to specify the .get_rmon_stats() operation.

---
 include/net/dsa.h |  3 +++
 net/dsa/slave.c   | 13 +++++++++++++
 2 files changed, 16 insertions(+)
include/net/dsa.h +3 -0
index 934958fda962..d9da32aacbf1 100644
@@ -873,6 +873,9 @@ struct dsa_switch_ops {
 				     struct ethtool_eth_mac_stats *mac_stats);
 	void	(*get_eth_ctrl_stats)(struct dsa_switch *ds, int port,
 				      struct ethtool_eth_ctrl_stats *ctrl_stats);
+	void	(*get_rmon_stats)(struct dsa_switch *ds, int port,
+				  struct ethtool_rmon_stats *rmon_stats,
+				  const struct ethtool_rmon_hist_range **ranges);
 	void	(*get_stats64)(struct dsa_switch *ds, int port,
 				   struct rtnl_link_stats64 *s);
 	void	(*self_test)(struct dsa_switch *ds, int port,
net/dsa/slave.c +13 -0
index 5ee0aced9410..27c8d28fd9d8 100644
@@ -1026,6 +1026,18 @@ dsa_slave_get_eth_ctrl_stats(struct net_device *dev,
 		ds->ops->get_eth_ctrl_stats(ds, dp->index, ctrl_stats);
 }
 
+static void
+dsa_slave_get_rmon_stats(struct net_device *dev,
+			 struct ethtool_rmon_stats *rmon_stats,
+			 const struct ethtool_rmon_hist_range **ranges)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_switch *ds = dp->ds;
+
+	if (ds->ops->get_rmon_stats)
+		ds->ops->get_rmon_stats(ds, dp->index, rmon_stats, ranges);
+}
+
 static void dsa_slave_net_selftest(struct net_device *ndev,
 				   struct ethtool_test *etest, u64 *buf)
 {
@@ -2105,6 +2117,7 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_eth_phy_stats	= dsa_slave_get_eth_phy_stats,
 	.get_eth_mac_stats	= dsa_slave_get_eth_mac_stats,
 	.get_eth_ctrl_stats	= dsa_slave_get_eth_ctrl_stats,
+	.get_rmon_stats		= dsa_slave_get_rmon_stats,
 	.set_wol		= dsa_slave_set_wol,
 	.get_wol		= dsa_slave_get_wol,
 	.set_eee		= dsa_slave_set_eee,
Signature · 1 line
2.34.1
author maintainer
#3 lore raw

PATCH v2 2/12 net: dsa: add Renesas RZ/N1 switch tag driver

In reply to Clément Léger

The switch that is present on the Renesas RZ/N1 SoC uses a specific VLAN value followed by 6 bytes which contains forwarding configuration.

---
 include/net/dsa.h        |   2 +
 net/dsa/Kconfig          |   7 +++
 net/dsa/Makefile         |   1 +
 net/dsa/tag_rzn1_a5psw.c | 114 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 net/dsa/tag_rzn1_a5psw.c
include/net/dsa.h +2 -0
index d9da32aacbf1..9aaaa7deb102 100644
@@ -53,6 +53,7 @@ struct phylink_link_state;
 #define DSA_TAG_PROTO_SJA1110_VALUE		23
 #define DSA_TAG_PROTO_RTL8_4_VALUE		24
 #define DSA_TAG_PROTO_RTL8_4T_VALUE		25
+#define DSA_TAG_PROTO_RZN1_A5PSW_VALUE		26
 
 enum dsa_tag_protocol {
 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
@@ -81,6 +82,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_SJA1110		= DSA_TAG_PROTO_SJA1110_VALUE,
 	DSA_TAG_PROTO_RTL8_4		= DSA_TAG_PROTO_RTL8_4_VALUE,
 	DSA_TAG_PROTO_RTL8_4T		= DSA_TAG_PROTO_RTL8_4T_VALUE,
+	DSA_TAG_PROTO_RZN1_A5PSW	= DSA_TAG_PROTO_RZN1_A5PSW_VALUE,
 };
 
 struct dsa_switch;
net/dsa/Kconfig +7 -0
index 8cb87b5067ee..e22f33d7cf60 100644
@@ -132,6 +132,13 @@ config NET_DSA_TAG_RTL8_4
 	  Say Y or M if you want to enable support for tagging frames for Realtek
 	  switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
 
+config NET_DSA_TAG_RZN1_A5PSW
+	tristate "Tag driver for Renesas RZ/N1 A5PSW switch"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Renesas RZ/N1 embedded switch that uses a 8 byte tag located after
+	  destination MAC address.
+
 config NET_DSA_TAG_LAN9303
 	tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
 	help
net/dsa/Makefile +1 -0
index 9f75820e7c98..af28c24ead18 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o
 obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
 obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
 obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o
+obj-$(CONFIG_NET_DSA_TAG_RZN1_A5PSW) += tag_rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
 obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
 obj-$(CONFIG_NET_DSA_TAG_XRS700X) += tag_xrs700x.o
net/dsa/tag_rzn1_a5psw.c new file +114 -0

114 lines not on this page · raw message

Signature · 1 line
2.34.1
#4 lore raw

Re: [net-next v2 02/12] net: dsa: add Renesas RZ/N1 switch tag driver

Quoted 5 lines · Clément Léger

The switch that is present on the Renesas RZ/N1 SoC uses a specific VLAN value followed by 6 bytes which contains forwarding configuration.

---

[snip]

net/dsa/tag_rzn1_a5psw.c line 35

Quoted 6 lines
net/dsa/tag_rzn1_a5psw.c new file +6 -0
+struct a5psw_tag {
+	__be16 ctrl_tag;
+	__be16 ctrl_data;
+	__be16 ctrl_data2_hi;
+	__be16 ctrl_data2_lo;
+} __packed;

The structure should already be naturally aligned.

Quoted 4 lines
net/dsa/tag_rzn1_a5psw.c new file +4 -0
+
+static struct sk_buff *a5psw_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);

net/dsa/tag_rzn1_a5psw.c line 49

Quoted 10 lines
net/dsa/tag_rzn1_a5psw.c new file +10 -0
+	struct a5psw_tag *ptag;
+	u32 data2_val;
+
+	BUILD_BUG_ON(sizeof(*ptag) != A5PSW_TAG_LEN);
+
+	/* The Ethernet switch we are interfaced with needs packets to be at
+	 * least 64 bytes (including FCS) otherwise they will be discarded when
+	 * they enter the switch port logic. When tagging is enabled, we need
+	 * to make sure that packets are at least 68 bytes (including FCS and
+	 * tag).

Did you mean 70 bytes since your tag is 6, and not 4 bytes?

Signature · 1 line
Florian
author maintainer
#5 lore raw

Re: [net-next v2 02/12] net: dsa: add Renesas RZ/N1 switch tag driver

Quoted 10 lines · Florian Fainelli
Quoted 6 lines · Clément Léger

The switch that is present on the Renesas RZ/N1 SoC uses a specific VLAN value followed by 6 bytes which contains forwarding configuration.

---

[snip]

Quoted 8 lines

net/dsa/tag_rzn1_a5psw.c line 35

Quoted 6 lines
net/dsa/tag_rzn1_a5psw.c new file +6 -0
+struct a5psw_tag {
+	__be16 ctrl_tag;
+	__be16 ctrl_data;
+	__be16 ctrl_data2_hi;
+	__be16 ctrl_data2_lo;
+} __packed;  

The structure should already be naturally aligned.

Indeed, I'll remove this packed attribute.

Quoted 13 lines
Quoted 13 lines
(quoted diff) +2 -0
+
+static struct sk_buff *a5psw_tag_xmit(struct sk_buff *skb, struct

net_device *dev) +{

net/dsa/tag_rzn1_a5psw.c new file +7 -0
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct a5psw_tag *ptag;
+	u32 data2_val;
+
+	BUILD_BUG_ON(sizeof(*ptag) != A5PSW_TAG_LEN);
+
+	/* The Ethernet switch we are interfaced with needs

packets to be at

(quoted diff) +1 -0
+	 * least 64 bytes (including FCS) otherwise they will be
Quoted 8 lines

net/dsa/tag_rzn1_a5psw.c line 49

Quoted 6 lines

discarded when

(quoted diff) +1 -0
+	 * they enter the switch port logic. When tagging is

enabled, we need

(quoted diff) +1 -0
+	 * to make sure that packets are at least 68 bytes

(including FCS and

net/dsa/tag_rzn1_a5psw.c new file +1 -0
+	 * tag).  

Did you mean 70 bytes since your tag is 6, and not 4 bytes?

Yes you are right, this should be 70 bytes. Additionnaly, I forgot to add the FCS len to the number of byte to be padded below.

author maintainer
#6 lore raw

PATCH v2 3/12 dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter

In reply to Clément Léger

This MII converter can be found on the RZ/N1 processor family. The MII converter ports are declared as subnodes which are then referenced by users of the PCS driver such as the switch.

---
 .../bindings/net/pcs/renesas,rzn1-miic.yaml   | 157 ++++++++++++++++++
 include/dt-bindings/net/pcs-rzn1-miic.h       |  33 ++++
 2 files changed, 190 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
 create mode 100644 include/dt-bindings/net/pcs-rzn1-miic.h
Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml new file +157 -0
new file mode 100644
index 000000000000..a417ed327413
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+  - Clément Léger <[email protected]>
+
+description: |
+  This MII converter is present on the Renesas RZ/N1 SoC family. It is
+  responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-miic
+      - const: renesas,rzn1-miic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MII reference clock
+      - description: RGMII reference clock
+      - description: RMII reference clock
+      - description: AHB clock used for the MII converter register interface
+
+  renesas,miic-switch-portin:
+    description: MII Switch PORTIN configuration. This value should use one of
+      the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+patternProperties:
+  "^mii-conv@[0-9]+$":
+    type: object
+    description: MII converter port
+
+    properties:
+      reg:
+        description: MII Converter port number.
+        enum: [1, 2, 3, 4, 5]
+
+      renesas,miic-input:
+        description: Converter input port configuration. This value should use
+          one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - renesas,miic-input
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 1
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [0]
+      - if:
+          properties:
+            reg:
+              const: 2
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [1, 11]
+      - if:
+          properties:
+            reg:
+              const: 3
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [7, 10]
+      - if:
+          properties:
+            reg:
+              const: 4
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [4, 6, 9, 13]
+      - if:
+          properties:
+            reg:
+              const: 5
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [3, 5, 8, 12]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/pcs-rzn1-miic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    eth-miic@44030000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+      reg = <0x44030000 0x10000>;
+      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+              <&sysctrl R9A06G032_CLK_RGMII_REF>,
+              <&sysctrl R9A06G032_CLK_RMII_REF>,
+              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+      renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+
+      mii_conv1: mii-conv@1 {
+        renesas,miic-input = <MIIC_GMAC1_PORT>;
+        reg = <1>;
+      };
+
+      mii_conv2: mii-conv@2 {
+        renesas,miic-input = <MIIC_SWITCH_PORTD>;
+        reg = <2>;
+      };
+
+      mii_conv3: mii-conv@3 {
+        renesas,miic-input = <MIIC_SWITCH_PORTC>;
+        reg = <3>;
+      };
+
+      mii_conv4: mii-conv@4 {
+        renesas,miic-input = <MIIC_SWITCH_PORTB>;
+        reg = <4>;
+      };
+
+      mii_conv5: mii-conv@5 {
+        renesas,miic-input = <MIIC_SWITCH_PORTA>;
+        reg = <5>;
+      };
+    };
include/dt-bindings/net/pcs-rzn1-miic.h new file +33 -0
new file mode 100644
index 000000000000..784782eaec9e
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ *
+ * Clément Léger <[email protected]>
+ */
+
+#ifndef _DT_BINDINGS_PCS_RZN1_MIIC
+#define _DT_BINDINGS_PCS_RZN1_MIIC
+
+/*
+ * Reefer to the datasheet [1] section 8.2.1, Internal Connection of Ethernet
+ * Ports to check the available combination
+ *
+ * [1] REN_r01uh0750ej0140-rzn1-introduction_MAT_20210228.pdf
+ */
+
+#define MIIC_GMAC1_PORT			0
+#define MIIC_GMAC2_PORT			1
+#define MIIC_RTOS_PORT			2
+#define MIIC_SERCOS_PORTA		3
+#define MIIC_SERCOS_PORTB		4
+#define MIIC_ETHERCAT_PORTA		5
+#define MIIC_ETHERCAT_PORTB		6
+#define MIIC_ETHERCAT_PORTC		7
+#define MIIC_SWITCH_PORTA		8
+#define MIIC_SWITCH_PORTB		9
+#define MIIC_SWITCH_PORTC		10
+#define MIIC_SWITCH_PORTD		11
+#define MIIC_HSR_PORTA			12
+#define MIIC_HSR_PORTB			13
+
+#endif
Signature · 1 line
2.34.1
author maintainer
#7 lore raw

PATCH v2 4/12 net: pcs: add Renesas MII converter driver

In reply to Clément Léger

Add a PCS driver for the MII converter that is present on the Renesas RZ/N1 SoC. This MII converter is reponsible for converting MII to RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to reuse it in both the switch driver and the stmmac driver. Currently, this driver only allows the PCS to be used by the dual Cortex-A7 subsystem since the register locking system is not used.

---
 drivers/net/pcs/Kconfig         |   7 +
 drivers/net/pcs/Makefile        |   1 +
 drivers/net/pcs/pcs-rzn1-miic.c | 508 ++++++++++++++++++++++++++++++++
 include/linux/pcs-rzn1-miic.h   |  18 ++
 4 files changed, 534 insertions(+)
 create mode 100644 drivers/net/pcs/pcs-rzn1-miic.c
 create mode 100644 include/linux/pcs-rzn1-miic.h
drivers/net/pcs/Kconfig +7 -0
index 22ba7b0b476d..d25236a62849 100644
@@ -18,4 +18,11 @@ config PCS_LYNX
 	  This module provides helpers to phylink for managing the Lynx PCS
 	  which is part of the Layerscape and QorIQ Ethernet SERDES.
 
+config PCS_RZN1_MIIC
+	tristate "Renesas RZ/N1 MII converter"
+	help
+	  This module provides a driver for the MII converter that is available
+	  on RZ/N1 SoCs. This PCS convert MII to RMII/RGMII or can be set in
+	  pass-through mode for MII.
+
 endmenu
drivers/net/pcs/Makefile +1 -0
index 0603d469bd57..0ff5388fcdea 100644
@@ -5,3 +5,4 @@ pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-nxp.o
 
 obj-$(CONFIG_PCS_XPCS)		+= pcs_xpcs.o
 obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
+obj-$(CONFIG_PCS_RZN1_MIIC)	+= pcs-rzn1-miic.o
drivers/net/pcs/pcs-rzn1-miic.c new file +508 -0

508 lines not on this page · raw message

include/linux/pcs-rzn1-miic.h new file +18 -0
new file mode 100644
index 000000000000..7a303af57e40
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Schneider Electric
+ *
+ * Clément Léger <[email protected]>
+ */
+
+#ifndef __LINUX_PCS_MIIC_H
+#define __LINUX_PCS_MIIC_H
+
+struct phylink;
+struct device_node;
+
+struct phylink_pcs *miic_create(struct device_node *np);
+
+void miic_destroy(struct phylink_pcs *pcs);
+
+#endif /* __LINUX_PCS_MIIC_H */
Signature · 1 line
2.34.1
author maintainer
#8 lore raw

Re: [net-next v2 04/12] net: pcs: add Renesas MII converter driver

drivers/net/pcs/pcs-rzn1-miic.c line 155

Quoted 11 lines · Clément Léger
drivers/net/pcs/pcs-rzn1-miic.c new file +11 -0
+
+static struct miic_port *phylink_pcs_to_miic_port(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct miic_port, pcs);
+}
+
+static void miic_reg_writel(struct miic *miic, int offset, u32 value)
+{
+	writel(value, miic->base + offset);
+
+	pr_err("Udpdating MIIC register %d with val %x\n", offset, value);

Spurious error message.

drivers/net/pcs/pcs-rzn1-miic.c line 227

Quoted 8 lines
drivers/net/pcs/pcs-rzn1-miic.c new file +8 -0
+
+static void miic_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			 phy_interface_t interface, int speed, int duplex)
+{
+	struct miic_port *miic_port = phylink_pcs_to_miic_port(pcs);
+	struct miic *miic = miic_port->miic;
+	int port = miic_port->port;
+	u32 conv_speed = 0, val = 0;

Missing reverse christmas tree declaration.

drivers/net/pcs/pcs-rzn1-miic.c line 370

Quoted 6 lines
drivers/net/pcs/pcs-rzn1-miic.c new file +6 -0
+
+static void miic_dump_conf(struct device *dev,
+			   s8 conf[MIIC_MODCTRL_CONF_CONV_NUM])
+{
+	int i;
+	const char *conf_name;

Ditto.

Signature · 3 lines
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com
#9 lore raw

Re: [net-next v2 04/12] net: pcs: add Renesas MII converter driver

In reply to Clément Léger

Hi Clément,

Quoted 12 lines · Clément Léger

Add a PCS driver for the MII converter that is present on the Renesas RZ/N1 SoC. This MII converter is reponsible for converting MII to RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to reuse it in both the switch driver and the stmmac driver. Currently, this driver only allows the PCS to be used by the dual Cortex-A7 subsystem since the register locking system is not used.

drivers/net/pcs/Kconfig config PCS_LYNX · line 22

Quoted 5 lines
drivers/net/pcs/Kconfig +2 -0
@@ -18,4 +18,11 @@ config PCS_LYNX
          This module provides helpers to phylink for managing the Lynx PCS
          which is part of the Layerscape and QorIQ Ethernet SERDES.
 
+config PCS_RZN1_MIIC
+       tristate "Renesas RZ/N1 MII converter"

depends on ARCH_RZN1 || COMPILE_TEST

drivers/net/pcs/Kconfig config PCS_LYNX · line 25

Quoted 3 lines
drivers/net/pcs/Kconfig +3 -0
+       help
+         This module provides a driver for the MII converter that is available
+         on RZ/N1 SoCs. This PCS convert MII to RMII/RGMII or can be set in

converts

Quoted 24 lines
drivers/net/pcs/Kconfig +2 -0
+         pass-through mode for MII.
+
 
drivers/net/pcs/pcs-rzn1-miic.c new file +18 -0
 
+static int miic_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct miic *miic;
+       u32 mode_cfg;
+       int ret;
+
+       ret = miic_parse_dt(dev, &mode_cfg);
+       if (ret < 0)
+               return -EINVAL;
+
+       miic = devm_kzalloc(dev, sizeof(*miic), GFP_KERNEL);
+       if (!miic)
+               return -ENOMEM;
+
+       spin_lock_init(&miic->lock);
+       miic->dev = dev;
+       miic->base = devm_platform_ioremap_resource(pdev, 0);

drivers/net/pcs/pcs-rzn1-miic.c line 460

Quoted 10 lines
drivers/net/pcs/pcs-rzn1-miic.c new file +10 -0
+       if (!miic->base)
+               return -EINVAL;
+
+       miic->nclk = devm_clk_bulk_get_all(dev, &miic->clks);
+       if (miic->nclk < 0)
+               return miic->nclk;
+
+       ret = clk_bulk_prepare_enable(miic->nclk, miic->clks);
+       if (ret)
+               return ret;

As you don't seem to need any knowledge about the clocks' properties, perhaps you can use Runtime PM instead?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

author maintainer
#10 lore raw

PATCH v2 5/12 dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port switch

In reply to Clément Léger

Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP. This company does not exists anymore and has been bought by Synopsys. Since this IP can't be find anymore in the Synospsy portfolio, lets use Renesas as the vendor compatible for this IP.

---
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  | 132 ++++++++++++++++++
 1 file changed, 132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml new file +132 -0
new file mode 100644
index 000000000000..f0f6748e1f01
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <[email protected]>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+patternProperties:
+  "^ethernet-ports$":
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-6]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+            $ref: /schemas/types.yaml#/definitions/phandle
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_mdio1>, <&pins_eth3>, <&pins_eth4>;
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac1>;
+                label = "cpu";
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };
Signature · 1 line
2.34.1
author maintainer
#11 lore raw

PATCH v2 6/12 net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver

In reply to Clément Léger

Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5 ports including 1 CPU management port. A MDIO bus is also exposed by this switch and allows to communicate with PHYs connected to the ports. Each switch port (except for the CPU management ports) is connected to the MII converter.

This driver includes basic bridging support, more support will be added later (vlan, etc).

---
 drivers/net/dsa/Kconfig      |   9 +
 drivers/net/dsa/Makefile     |   1 +
 drivers/net/dsa/rzn1_a5psw.c | 712 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h | 199 ++++++++++
 4 files changed, 921 insertions(+)
 create mode 100644 drivers/net/dsa/rzn1_a5psw.c
 create mode 100644 drivers/net/dsa/rzn1_a5psw.h
drivers/net/dsa/Kconfig +9 -0
index 37a3dabdce31..0896c5fd9dec 100644
@@ -70,6 +70,15 @@ config NET_DSA_QCA8K
 
 source "drivers/net/dsa/realtek/Kconfig"
 
+config NET_DSA_RZN1_A5PSW
+	tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
+	depends on NET_DSA
+	select NET_DSA_TAG_RZN1_A5PSW
+	select PCS_RZN1_MIIC
+	help
+	  This driver supports the A5PSW switch, which is embedded in Renesas
+	  RZ/N1 SoC.
+
 config NET_DSA_SMSC_LAN9303
 	tristate
 	depends on VLAN_8021Q || VLAN_8021Q=n
drivers/net/dsa/Makefile +1 -0
index e73838c12256..b32907afa702 100644
@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
+obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
drivers/net/dsa/rzn1_a5psw.c new file +712 -0

712 lines not on this page · raw message

drivers/net/dsa/rzn1_a5psw.h new file +199 -0

199 lines not on this page · raw message

Signature · 1 line
2.34.1
author maintainer
#12 lore raw

PATCH v2 7/12 net: dsa: rzn1-a5psw: add statistics support

In reply to Clément Léger

Add statistics support to the rzn1-a5psw driver by implementing the following dsa_switch_ops callbacks:
- get_sset_count()
- get_strings()
- get_ethtool_stats()
- get_eth_mac_stats()
- get_eth_ctrl_stats()
- get_rmon_stats()

---
 drivers/net/dsa/rzn1_a5psw.c | 178 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h |  46 ++++++++-
 2 files changed, 223 insertions(+), 1 deletion(-)
drivers/net/dsa/rzn1_a5psw.c +178 -0
index 2cb0a66a041f..4affdbbf7c79 100644
@@ -16,6 +16,61 @@
 
 #include "rzn1_a5psw.h"
 
+struct a5psw_stats {
+	u16 offset;
+	const char name[ETH_GSTRING_LEN];
+};
+
+#define STAT_DESC(_offset, _name) {.offset = _offset, .name = _name}
+
+static const struct a5psw_stats a5psw_stats[] = {
+	STAT_DESC(A5PSW_aFramesTransmittedOK, "aFrameTransmittedOK"),
+	STAT_DESC(A5PSW_aFramesReceivedOK, "aFrameReceivedOK"),
+	STAT_DESC(A5PSW_aFrameCheckSequenceErrors, "aFrameCheckSequenceErrors"),
+	STAT_DESC(A5PSW_aAlignmentErrors, "aAlignmentErrors"),
+	STAT_DESC(A5PSW_aOctetsTransmittedOK, "aOctetsTransmittedOK"),
+	STAT_DESC(A5PSW_aOctetsReceivedOK, "aOctetsReceivedOK"),
+	STAT_DESC(A5PSW_aTxPAUSEMACCtrlFrames, "aTxPAUSEMACCtrlFrames"),
+	STAT_DESC(A5PSW_aRxPAUSEMACCtrlFrames, "aRxPAUSEMACCtrlFrames"),
+	STAT_DESC(A5PSW_ifInErrors, "ifInErrors"),
+	STAT_DESC(A5PSW_ifOutErrors, "ifOutErrors"),
+	STAT_DESC(A5PSW_ifInUcastPkts, "ifInUcastPkts"),
+	STAT_DESC(A5PSW_ifInMulticastPkts, "ifInMulticastPkts"),
+	STAT_DESC(A5PSW_ifInBroadcastPkts, "ifInBroadcastPkts"),
+	STAT_DESC(A5PSW_ifOutDiscards, "ifOutDiscards"),
+	STAT_DESC(A5PSW_ifOutUcastPkts, "ifOutUcastPkts"),
+	STAT_DESC(A5PSW_ifOutMulticastPkts, "ifOutMulticastPkts"),
+	STAT_DESC(A5PSW_ifOutBroadcastPkts, "ifOutBroadcastPkts"),
+	STAT_DESC(A5PSW_etherStatsDropEvents, "etherStatsDropEvents"),
+	STAT_DESC(A5PSW_etherStatsOctets, "etherStatsOctets"),
+	STAT_DESC(A5PSW_etherStatsPkts, "etherStatsPkts"),
+	STAT_DESC(A5PSW_etherStatsUndersizePkts, "etherStatsUndersizePkts"),
+	STAT_DESC(A5PSW_etherStatsOversizePkts, "etherStatsOversizePkts"),
+	STAT_DESC(A5PSW_etherStatsPkts64Octets, "etherStatsPkts64Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts65to127Octets,
+		  "etherStatsPkts65to127Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts128to255Octets,
+		  "etherStatsPkts128to255Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts256to511Octets,
+		  "etherStatsPkts256to511Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts512to1023Octets,
+		  "etherStatsPkts512to1023Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts1024to1518Octets,
+		  "etherStatsPkts1024to1518Octets"),
+	STAT_DESC(A5PSW_etherStatsPkts1519toXOctets,
+		  "etherStatsPkts1519toXOctets"),
+	STAT_DESC(A5PSW_etherStatsJabbers, "etherStatsJabbers"),
+	STAT_DESC(A5PSW_etherStatsFragments, "etherStatsFragments"),
+	STAT_DESC(A5PSW_VLANReceived, "VLANReceived"),
+	STAT_DESC(A5PSW_VLANTransmitted, "VLANTransmitted"),
+	STAT_DESC(A5PSW_aDeferred, "aDeferred"),
+	STAT_DESC(A5PSW_aMultipleCollisions, "aMultipleCollisions"),
+	STAT_DESC(A5PSW_aSingleCollisions, "aSingleCollisions"),
+	STAT_DESC(A5PSW_aLateCollisions, "aLateCollisions"),
+	STAT_DESC(A5PSW_aExcessiveCollisions, "aExcessiveCollisions"),
+	STAT_DESC(A5PSW_aCarrierSenseErrors, "aCarrierSenseErrors"),
+};
+
 static void a5psw_reg_writel(struct a5psw *a5psw, int offset, u32 value)
 {
 	writel(value, a5psw->base + offset);
@@ -322,6 +377,123 @@ static void a5psw_port_fast_age(struct dsa_switch *ds, int port)
 	a5psw_port_fdb_flush(a5psw, port);
 }
 
+static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
+{
+	u32 reg_lo, reg_hi;
+
+	reg_lo = a5psw_reg_readl(a5psw, offset + A5PSW_PORT_OFFSET(port));
+	/* A5PSW_STATS_HIWORD is latched on stat read */
+	reg_hi = a5psw_reg_readl(a5psw, A5PSW_STATS_HIWORD);
+
+	return ((u64)reg_hi << 32) | reg_lo;
+}
+
+static void a5psw_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+			      uint8_t *data)
+{
+	unsigned int u;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	for (u = 0; u < ARRAY_SIZE(a5psw_stats); u++) {
+		memcpy(data + u * ETH_GSTRING_LEN, a5psw_stats[u].name,
+		       ETH_GSTRING_LEN);
+	}
+}
+
+static void a5psw_get_ethtool_stats(struct dsa_switch *ds, int port,
+				    uint64_t *data)
+{
+	struct a5psw *a5psw = ds->priv;
+	unsigned int u;
+
+	for (u = 0; u < ARRAY_SIZE(a5psw_stats); u++)
+		data[u] = a5psw_read_stat(a5psw, a5psw_stats[u].offset, port);
+}
+
+static int a5psw_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	if (sset != ETH_SS_STATS)
+		return 0;
+
+	return ARRAY_SIZE(a5psw_stats);
+}
+
+static void a5psw_get_eth_mac_stats(struct dsa_switch *ds, int port,
+				    struct ethtool_eth_mac_stats *mac_stats)
+{
+	struct a5psw *a5psw = ds->priv;
+
+#define RD(name) a5psw_read_stat(a5psw, A5PSW_##name, port)
+	mac_stats->FramesTransmittedOK = RD(aFramesTransmittedOK);
+	mac_stats->SingleCollisionFrames = RD(aSingleCollisions);
+	mac_stats->MultipleCollisionFrames = RD(aMultipleCollisions);
+	mac_stats->FramesReceivedOK = RD(aFramesReceivedOK);
+	mac_stats->FrameCheckSequenceErrors = RD(aFrameCheckSequenceErrors);
+	mac_stats->AlignmentErrors = RD(aAlignmentErrors);
+	mac_stats->OctetsTransmittedOK = RD(aOctetsTransmittedOK);
+	mac_stats->FramesWithDeferredXmissions = RD(aDeferred);
+	mac_stats->LateCollisions = RD(aLateCollisions);
+	mac_stats->FramesAbortedDueToXSColls = RD(aExcessiveCollisions);
+	mac_stats->FramesLostDueToIntMACXmitError = RD(ifOutErrors);
+	mac_stats->CarrierSenseErrors = RD(aCarrierSenseErrors);
+	mac_stats->OctetsReceivedOK = RD(aOctetsReceivedOK);
+	mac_stats->FramesLostDueToIntMACRcvError = RD(ifInErrors);
+	mac_stats->MulticastFramesXmittedOK = RD(ifOutMulticastPkts);
+	mac_stats->BroadcastFramesXmittedOK = RD(ifOutBroadcastPkts);
+	mac_stats->FramesWithExcessiveDeferral = RD(aDeferred);
+	mac_stats->MulticastFramesReceivedOK = RD(ifInMulticastPkts);
+	mac_stats->BroadcastFramesReceivedOK = RD(ifInBroadcastPkts);
+#undef RD
+}
+
+static const struct ethtool_rmon_hist_range a5psw_rmon_ranges[] = {
+	{ 0, 64 },
+	{ 65, 127 },
+	{ 128, 255 },
+	{ 256, 511 },
+	{ 512, 1023 },
+	{ 1024, 1518 },
+	{ 1519, A5PSW_MAX_MTU },
+	{}
+};
+
+static void a5psw_get_rmon_stats(struct dsa_switch *ds, int port,
+				 struct ethtool_rmon_stats *rmon_stats,
+				 const struct ethtool_rmon_hist_range **ranges)
+{
+	struct a5psw *a5psw = ds->priv;
+
+#define RD(name) a5psw_read_stat(a5psw, A5PSW_##name, port)
+	rmon_stats->undersize_pkts = RD(etherStatsUndersizePkts);
+	rmon_stats->oversize_pkts = RD(etherStatsOversizePkts);
+	rmon_stats->fragments = RD(etherStatsFragments);
+	rmon_stats->jabbers = RD(etherStatsJabbers);
+	rmon_stats->hist[0] = RD(etherStatsPkts64Octets);
+	rmon_stats->hist[1] = RD(etherStatsPkts65to127Octets);
+	rmon_stats->hist[2] = RD(etherStatsPkts128to255Octets);
+	rmon_stats->hist[3] = RD(etherStatsPkts256to511Octets);
+	rmon_stats->hist[4] = RD(etherStatsPkts512to1023Octets);
+	rmon_stats->hist[5] = RD(etherStatsPkts1024to1518Octets);
+	rmon_stats->hist[6] = RD(etherStatsPkts1519toXOctets);
+#undef RD
+
+	*ranges = a5psw_rmon_ranges;
+}
+
+static void a5psw_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
+				     struct ethtool_eth_ctrl_stats *ctrl_stats)
+{
+	struct a5psw *a5psw = ds->priv;
+	u64 stat;
+
+	stat = a5psw_read_stat(a5psw, A5PSW_aTxPAUSEMACCtrlFrames, port);
+	ctrl_stats->MACControlFramesTransmitted = stat;
+	stat = a5psw_read_stat(a5psw, A5PSW_aRxPAUSEMACCtrlFrames, port);
+	ctrl_stats->MACControlFramesReceived = stat;
+}
+
 static int a5psw_setup(struct dsa_switch *ds)
 {
 	struct a5psw *a5psw = ds->priv;
@@ -410,6 +582,12 @@ const struct dsa_switch_ops a5psw_switch_ops = {
 	.phylink_mac_link_up = a5psw_phylink_mac_link_up,
 	.port_change_mtu = a5psw_port_change_mtu,
 	.port_max_mtu = a5psw_port_max_mtu,
+	.get_sset_count = a5psw_get_sset_count,
+	.get_strings = a5psw_get_strings,
+	.get_ethtool_stats = a5psw_get_ethtool_stats,
+	.get_eth_mac_stats = a5psw_get_eth_mac_stats,
+	.get_eth_ctrl_stats = a5psw_get_eth_ctrl_stats,
+	.get_rmon_stats = a5psw_get_rmon_stats,
 	.set_ageing_time = a5psw_set_ageing_time,
 	.port_bridge_join = a5psw_port_bridge_join,
 	.port_bridge_leave = a5psw_port_bridge_leave,
drivers/net/dsa/rzn1_a5psw.h +45 -1

58 lines not on this page · raw message

Signature · 1 line
2.34.1
author maintainer
#13 lore raw

PATCH v2 8/12 net: dsa: rzn1-a5psw: add FDB support

In reply to Clément Léger

This commits add forwarding database support to the driver. It implements fdb_add(), fdb_del() and fdb_dump().

---
 drivers/net/dsa/rzn1_a5psw.c | 165 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h |  16 ++++
 2 files changed, 181 insertions(+)
drivers/net/dsa/rzn1_a5psw.c +165 -0
index 4affdbbf7c79..357ebfb638fc 100644
@@ -377,6 +377,168 @@ static void a5psw_port_fast_age(struct dsa_switch *ds, int port)
 	a5psw_port_fdb_flush(a5psw, port);
 }
 
+static int a5psw_lk_execute_lookup(struct a5psw *a5psw, union lk_data *lk_data,
+				   u16 *entry)
+{
+	u32 ctrl;
+	int ret;
+
+	a5psw_reg_writel(a5psw, A5PSW_LK_DATA_LO, lk_data->lo);
+	a5psw_reg_writel(a5psw, A5PSW_LK_DATA_HI, lk_data->hi);
+
+	ctrl = A5PSW_LK_ADDR_CTRL_LOOKUP;
+	ret = a5psw_lk_execute_ctrl(a5psw, &ctrl);
+	if (ret)
+		return ret;
+
+	*entry = ctrl & A5PSW_LK_ADDR_CTRL_ADDRESS;
+
+	return 0;
+}
+
+static int a5psw_port_fdb_add(struct dsa_switch *ds, int port,
+			      const unsigned char *addr, u16 vid,
+			      struct dsa_db db)
+{
+	struct a5psw *a5psw = ds->priv;
+	union lk_data lk_data = {0};
+	bool inc_learncount = false;
+	int ret = 0;
+	u16 entry;
+	u32 reg;
+
+	ether_addr_copy(lk_data.entry.mac, addr);
+	lk_data.entry.port_mask = BIT(port);
+
+	spin_lock(&a5psw->lk_lock);
+
+	/* Set the value to be written in the lookup table */
+	ret = a5psw_lk_execute_lookup(a5psw, &lk_data, &entry);
+	if (ret)
+		goto lk_unlock;
+
+	lk_data.hi = a5psw_reg_readl(a5psw, A5PSW_LK_DATA_HI);
+	if (!lk_data.entry.valid) {
+		inc_learncount = true;
+		/* port_mask set to 0x1f when entry is not valid, clear it */
+		lk_data.entry.port_mask = 0;
+		lk_data.entry.prio = 0;
+	}
+
+	lk_data.entry.port_mask |= BIT(port);
+	lk_data.entry.is_static = 1;
+	lk_data.entry.valid = 1;
+
+	a5psw_reg_writel(a5psw, A5PSW_LK_DATA_HI, lk_data.hi);
+
+	reg = A5PSW_LK_ADDR_CTRL_WRITE | entry;
+	ret = a5psw_lk_execute_ctrl(a5psw, &reg);
+	if (ret)
+		goto lk_unlock;
+
+	if (inc_learncount) {
+		reg = A5PSW_LK_LEARNCOUNT_MODE_INC;
+		a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
+	}
+
+lk_unlock:
+	spin_unlock(&a5psw->lk_lock);
+
+	return ret;
+}
+
+static int a5psw_port_fdb_del(struct dsa_switch *ds, int port,
+			      const unsigned char *addr, u16 vid,
+			      struct dsa_db db)
+{
+	struct a5psw *a5psw = ds->priv;
+	union lk_data lk_data = {0};
+	bool clear = false;
+	int ret = 0;
+	u16 entry;
+	u32 reg;
+
+	ether_addr_copy(lk_data.entry.mac, addr);
+
+	spin_lock(&a5psw->lk_lock);
+
+	ret = a5psw_lk_execute_lookup(a5psw, &lk_data, &entry);
+	if (ret) {
+		dev_err(a5psw->dev, "Failed to lookup mac address\n");
+		goto lk_unlock;
+	}
+
+	lk_data.hi = a5psw_reg_readl(a5psw, A5PSW_LK_DATA_HI);
+	if (!lk_data.entry.valid) {
+		dev_err(a5psw->dev, "Tried to remove non-existing entry\n");
+		ret = -ENOENT;
+		goto lk_unlock;
+	}
+
+	lk_data.entry.port_mask &= ~BIT(port);
+	/* If there is no more port in the mask, clear the entry */
+	if (lk_data.entry.port_mask == 0)
+		clear = true;
+
+	a5psw_reg_writel(a5psw, A5PSW_LK_DATA_HI, lk_data.hi);
+
+	reg = entry;
+	if (clear)
+		reg |= A5PSW_LK_ADDR_CTRL_CLEAR;
+	else
+		reg |= A5PSW_LK_ADDR_CTRL_WRITE;
+
+	ret = a5psw_lk_execute_ctrl(a5psw, &reg);
+	if (ret)
+		goto lk_unlock;
+
+	/* Decrement LEARNCOUNT */
+	if (clear) {
+		reg = A5PSW_LK_LEARNCOUNT_MODE_DEC;
+		a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
+	}
+
+lk_unlock:
+	spin_unlock(&a5psw->lk_lock);
+
+	return ret;
+}
+
+static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
+			       dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct a5psw *a5psw = ds->priv;
+	union lk_data lk_data;
+	int i = 0, ret;
+	u32 reg;
+
+	for (i = 0; i < A5PSW_TABLE_ENTRIES; i++) {
+		reg = A5PSW_LK_ADDR_CTRL_READ | A5PSW_LK_ADDR_CTRL_WAIT | i;
+		spin_lock(&a5psw->lk_lock);
+
+		ret = a5psw_lk_execute_ctrl(a5psw, &reg);
+		if (ret)
+			return ret;
+
+		lk_data.hi = a5psw_reg_readl(a5psw, A5PSW_LK_DATA_HI);
+		/* If entry is not valid or does not contain the port, skip */
+		if (!lk_data.entry.valid ||
+		    !(lk_data.entry.port_mask & BIT(port))) {
+			spin_unlock(&a5psw->lk_lock);
+			continue;
+		}
+
+		lk_data.lo = a5psw_reg_readl(a5psw, A5PSW_LK_DATA_LO);
+		spin_unlock(&a5psw->lk_lock);
+
+		ret = cb(lk_data.entry.mac, 0, lk_data.entry.is_static, data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
 {
 	u32 reg_lo, reg_hi;
@@ -593,6 +755,9 @@ const struct dsa_switch_ops a5psw_switch_ops = {
 	.port_bridge_leave = a5psw_port_bridge_leave,
 	.port_stp_state_set = a5psw_port_stp_state_set,
 	.port_fast_age = a5psw_port_fast_age,
+	.port_fdb_add = a5psw_port_fdb_add,
+	.port_fdb_del = a5psw_port_fdb_del,
+	.port_fdb_dump = a5psw_port_fdb_dump,
 };
 
 static int a5psw_mdio_wait_busy(struct a5psw *a5psw)
drivers/net/dsa/rzn1_a5psw.h +16 -0
index 7be8c6da240b..e87379f66653 100644
@@ -212,6 +212,22 @@
 #define A5PSW_CTRL_TIMEOUT		1000
 #define A5PSW_TABLE_ENTRIES		8192
 
+struct fdb_entry {
+	u8 mac[ETH_ALEN];
+	u8 valid:1;
+	u8 is_static:1;
+	u8 prio:3;
+	u8 port_mask:5;
+} __packed;
+
+union lk_data {
+	struct {
+		u32 lo;
+		u32 hi;
+	};
+	struct fdb_entry entry;
+};
+
 /**
  * struct a5psw - switch struct
  * @base: Base address of the switch
Signature · 1 line
2.34.1
author maintainer
#14 lore raw

PATCH v2 9/12 ARM: dts: r9a06g032: describe MII converter

In reply to Clément Léger

Add the MII converter node which describes the MII converter that is present on the RZ/N1 SoC.

---
 arch/arm/boot/dts/r9a06g032.dtsi | 37 ++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
arch/arm/boot/dts/r9a06g032.dtsi +37 -0
index 636a6ab31c58..f2d474a236fd 100644
@@ -200,6 +200,43 @@ nand_controller: nand-controller@40102000 {
 			status = "disabled";
 		};
 
+		eth_miic: eth-miic@44030000 {
+			compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44030000 0x10000>;
+			clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+				 <&sysctrl R9A06G032_CLK_RGMII_REF>,
+				 <&sysctrl R9A06G032_CLK_RMII_REF>,
+				 <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+			status = "disabled";
+
+			mii_conv1: mii-conv@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			mii_conv2: mii-conv@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mii_conv3: mii-conv@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			mii_conv4: mii-conv@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			mii_conv5: mii-conv@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
Signature · 1 line
2.34.1
author maintainer
#15 lore raw

PATCH v2 10/12 ARM: dts: r9a06g032: describe GMAC2

In reply to Clément Léger

RZ/N1 SoC includes two MAC named GMACx that are compatible with the "snps,dwmac" driver. GMAC1 is connected directly to the MII converter port 1. GMAC2 however can be used as the MAC for the switch CPU management port or can be muxed to be connected directly to the MII converter port 2. This commit add description for the GMAC2 which will be used by the switch description.

---
 arch/arm/boot/dts/r9a06g032.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/arm/boot/dts/r9a06g032.dtsi +17 -0
index f2d474a236fd..54f0869e3c3c 100644
@@ -200,6 +200,23 @@ nand_controller: nand-controller@40102000 {
 			status = "disabled";
 		};
 
+		gmac2: ethernet@44002000 {
+			compatible = "snps,dwmac";
+			reg = <0x44002000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clock-names = "stmmaceth";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
 		eth_miic: eth-miic@44030000 {
 			compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
 			#address-cells = <1>;
Signature · 1 line
2.34.1
author maintainer
#16 lore raw

PATCH v2 11/12 ARM: dts: r9a06g032: describe switch

In reply to Clément Léger

Add description of the switch that is present on the RZ/N1 SoC.

---
 arch/arm/boot/dts/r9a06g032.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm/boot/dts/r9a06g032.dtsi +9 -0
index 54f0869e3c3c..9725fddb8693 100644
@@ -254,6 +254,15 @@ mii_conv5: mii-conv@5 {
 			};
 		};
 
+		switch: switch@44050000 {
+			compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+			reg = <0x44050000 0x10000>;
+			clocks = <&sysctrl R9A06G032_HCLK_SWITCH>,
+				 <&sysctrl R9A06G032_CLK_SWITCH>;
+			clock-names = "hclk", "clk";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
Signature · 1 line
2.34.1
author maintainer
#17 lore raw

PATCH v2 12/12 MAINTAINERS: add Renesas RZ/N1 switch related driver entry

In reply to Clément Léger

After contributing the drivers, volunteer for maintenance and add myself as the maintainer for Renesas RZ/N1 switch related drivers.

---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
index b5f2a647e2cb..8af5888a7040 100644
@@ -16866,6 +16866,17 @@ S:	Supported
 F:	Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
 F:	drivers/iio/adc/rzg2l_adc.c
 
+RENESAS RZ/N1 A5PSW SWITCH DRIVER
+M:	Clément Léger <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+F:	Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
+F:	drivers/net/dsa/rzn1_a5psw*
+F:	drivers/net/pcs/pcs-rzn1-miic.c
+F:	include/dt-bindings/net/pcs-rzn1-miic.h
+F:	include/linux/pcs-rzn1-miic.h
+F:	net/dsa/tag_rzn1_a5psw.c
+
 RENESAS R-CAR GEN3 & RZ/N1 NAND CONTROLLER DRIVER
 M:	Miquel Raynal <[email protected]>
 L:	[email protected]
Signature · 1 line
2.34.1
maintainer
#18 lore raw
In reply to Clément Léger
Quoted 10 lines · On Fri, 29 Apr 2022 16:34:53 +0200 Clément Léger wrote:

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

Quoted 3 lines

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

Build's not happy (W=1 C=1):

drivers/net/dsa/rzn1_a5psw.c:574:29: warning: symbol 'a5psw_switch_ops' was not declared. Should it be static? In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field ‘port_mask’ has changed in GCC 4.4

  221 | } __packed;
      | ^

drivers/net/dsa/rzn1_a5psw.h:200: warning: Function parameter or member 'hclk' not described in 'a5psw' drivers/net/dsa/rzn1_a5psw.h:200: warning: Function parameter or member 'clk' not described in 'a5psw'

Not sure how many of these are added by you but I think 2 at least.

author maintainer
#19 lore raw
Quoted 15 lines · Jakub Kicinski
Quoted 10 lines · On Fri, 29 Apr 2022 16:34:53 +0200 Clément Léger wrote:

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

Quoted 3 lines

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

Quoted 8 lines

Build's not happy (W=1 C=1):

drivers/net/dsa/rzn1_a5psw.c:574:29: warning: symbol 'a5psw_switch_ops' was not declared. Should it be static? In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field ‘port_mask’ has changed in GCC 4.4

  221 | } __packed;
      | ^

Hi Jakub, I only had this one (due to the lack of W=1 C=1 I guess) which I thought (wrongly) that it was due to my GCC version:

CC net/dsa/switch.o
CC net/dsa/tag_8021q.o
In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
../drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field

  ‘port_mask’ has changed in GCC 4.4 221 | } __packed;
      | ^
  CC      kernel/module.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac100_core.o

I'll fix the other errors which are more trivial, however, I did not found a way to fix the packed bit-field warning.

Thanks

Quoted 4 lines

drivers/net/dsa/rzn1_a5psw.h:200: warning: Function parameter or member 'hclk' not described in 'a5psw' drivers/net/dsa/rzn1_a5psw.h:200: warning: Function parameter or member 'clk' not described in 'a5psw'

Not sure how many of these are added by you but I think 2 at least.

Signature · 3 lines
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com
#20 lore raw

Hi Clément,

Quoted 34 lines · Clément Léger
Quoted 15 lines · Jakub Kicinski
Quoted 10 lines · On Fri, 29 Apr 2022 16:34:53 +0200 Clément Léger wrote:

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

Quoted 3 lines

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

Quoted 8 lines

Build's not happy (W=1 C=1):

drivers/net/dsa/rzn1_a5psw.c:574:29: warning: symbol 'a5psw_switch_ops' was not declared. Should it be static? In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field ‘port_mask’ has changed in GCC 4.4

  221 | } __packed;
      | ^

Hi Jakub, I only had this one (due to the lack of W=1 C=1 I guess) which I thought (wrongly) that it was due to my GCC version:

CC net/dsa/switch.o
CC net/dsa/tag_8021q.o
In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
../drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field

Quoted 8 lines
  ‘port_mask’ has changed in GCC 4.4 221 | } __packed;
      | ^
  CC      kernel/module.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac100_core.o

I'll fix the other errors which are more trivial, however, I did not found a way to fix the packed bit-field warning.

The "port_mask" field is split across 2 u8s.
What about using u16 instead, and adding explicit padding while at it? The below gets rid of the warning, while the generated code is the same.

drivers/net/dsa/rzn1_a5psw.h +5 -4
@@ -169,10 +169,11 @@
 
 struct fdb_entry {
        u8 mac[ETH_ALEN];
-       u8 valid:1;
-       u8 is_static:1;
-       u8 prio:3;
-       u8 port_mask:5;
+       u16 valid:1;
+       u16 is_static:1;
+       u16 prio:3;
+       u16 port_mask:5;
+       u16 reserved:6;
 } __packed;
 
 union lk_data {

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

author maintainer
#21 lore raw
Quoted 60 lines · Geert Uytterhoeven

Hi Clément,

Quoted 36 lines · Clément Léger
Quoted 17 lines · Jakub Kicinski
Quoted 12 lines · On Fri, 29 Apr 2022 16:34:53 +0200 Clément Léger wrote:

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

Quoted 3 lines

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

Quoted 8 lines

Build's not happy (W=1 C=1):

drivers/net/dsa/rzn1_a5psw.c:574:29: warning: symbol 'a5psw_switch_ops' was not declared. Should it be static? In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field ‘port_mask’ has changed in GCC 4.4 221 | } __packed; | ^

Hi Jakub, I only had this one (due to the lack of W=1 C=1 I guess) which I thought (wrongly) that it was due to my GCC version:

CC net/dsa/switch.o
CC net/dsa/tag_8021q.o
In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
../drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed

Quoted 8 lines
bit-field ‘port_mask’ has changed in GCC 4.4 221 | } __packed;
      | ^
  CC      kernel/module.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac100_core.o

I'll fix the other errors which are more trivial, however, I did not found a way to fix the packed bit-field warning.

The "port_mask" field is split across 2 u8s.
What about using u16 instead, and adding explicit padding while at it? The below gets rid of the warning, while the generated code is the same.

drivers/net/dsa/rzn1_a5psw.h +0 -0
@@ -169,10 +169,11 @@
 
 struct fdb_entry {
        u8 mac[ETH_ALEN];

drivers/net/dsa/rzn1_a5psw.h line 177

Quoted 10 lines
drivers/net/dsa/rzn1_a5psw.h +5 -4
-       u8 valid:1;
-       u8 is_static:1;
-       u8 prio:3;
-       u8 port_mask:5;
+       u16 valid:1;
+       u16 is_static:1;
+       u16 prio:3;
+       u16 port_mask:5;
+       u16 reserved:6;
 } __packed;

Hi Geert ! Indeed, while looking a bit more in depth at this error I found that using u16 avoids this error. I did switch to u16 but did not add any "reserved" field at the end and there is no more error. Do you think adding the "reserved" field would be preferable ?

Thanks

Quoted 14 lines
drivers/net/dsa/rzn1_a5psw.h +0 -0
 union lk_data {
 

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

#22 lore raw

Hi Clément,

Quoted 67 lines · Clément Léger
Quoted 65 lines · Geert Uytterhoeven
Quoted 36 lines · Clément Léger
Quoted 17 lines · Jakub Kicinski
Quoted 12 lines · On Fri, 29 Apr 2022 16:34:53 +0200 Clément Léger wrote:

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains (most notably) a switch, two GMACs, and a MII converter [1]. This series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS which sit between the MACs and the PHY. This PCS driver is probed from the device-tree since it requires to be configured. Indeed the MII converter also contains the registers that are handling the muxing of ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

Quoted 3 lines

The switch driver is based on DSA and exposes 4 ports + 1 CPU management port. It include basic bridging support as well as FDB and statistics support.

Quoted 8 lines

Build's not happy (W=1 C=1):

drivers/net/dsa/rzn1_a5psw.c:574:29: warning: symbol 'a5psw_switch_ops' was not declared. Should it be static? In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed bit-field ‘port_mask’ has changed in GCC 4.4 221 | } __packed; | ^

Hi Jakub, I only had this one (due to the lack of W=1 C=1 I guess) which I thought (wrongly) that it was due to my GCC version:

CC net/dsa/switch.o
CC net/dsa/tag_8021q.o
In file included from ../drivers/net/dsa/rzn1_a5psw.c:17:
../drivers/net/dsa/rzn1_a5psw.h:221:1: note: offset of packed

Quoted 8 lines
bit-field ‘port_mask’ has changed in GCC 4.4 221 | } __packed;
      | ^
  CC      kernel/module.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.o
  CC      drivers/net/ethernet/stmicro/stmmac/dwmac100_core.o

I'll fix the other errors which are more trivial, however, I did not found a way to fix the packed bit-field warning.

The "port_mask" field is split across 2 u8s.
What about using u16 instead, and adding explicit padding while at it? The below gets rid of the warning, while the generated code is the same.

drivers/net/dsa/rzn1_a5psw.h +3 -4
@@ -169,10 +169,11 @@
 
 struct fdb_entry {
        u8 mac[ETH_ALEN];
-       u8 valid:1;
-       u8 is_static:1;
-       u8 prio:3;
-       u8 port_mask:5;
+       u16 valid:1;
+       u16 is_static:1;
+       u16 prio:3;
Quoted 8 lines

drivers/net/dsa/rzn1_a5psw.h line 177

Quoted 3 lines
drivers/net/dsa/rzn1_a5psw.h +2 -0
+       u16 port_mask:5;
+       u16 reserved:6;
 } __packed;

Hi Geert ! Indeed, while looking a bit more in depth at this error I found that using u16 avoids this error. I did switch to u16 but did not add any "reserved" field at the end and there is no more error. Do you think adding the "reserved" field would be preferable ?

As this structure reflects a hardware definition, I think it is better to make this explicit.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds