powerpc: Remove invalid GLIBC_EXTRA_OECONF
PATCH 1/1 powerpc: Remove invalid GLIBC_EXTRA_OECONF
OE-core previously carried patches to glibc that added optimized sqrt implementations for various PowerPC chips. These were recently removed, which now results in errors when compiling glibc with certian PowerPC machine tunes:
checking sysdep dirs... configure: error: The 603e subspecies of powerpc is not supported.
Remove setting GLIBC_EXTRA_OECONF with parameters that are no longer valid. Also remove a commented out setting of the variable that probably isn't vaild anyway.
--- meta/conf/machine/include/powerpc/tune-ppc603e.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppc7400.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce300c3.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce500mc.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce5500.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce6500.inc | 4 ---- 6 files changed, 19 deletions(-)
meta/conf/machine/include/powerpc/tune-ppc603e.inc +0 -3
@@ -9,6 +9,3 @@ AVAILTUNES += "ppc603e" TUNE_FEATURES:tune-ppc603e = "m32 fpu-hard ppc603e bigendian" TUNE_PKGARCH:tune-ppc603e = "ppc603e" PACKAGE_EXTRA_ARCHS:tune-ppc603e = "${PACKAGE_EXTRA_ARCHS:tune-powerpc} ppc603e" - -# glibc configure options to get 603e specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppc603e', '-with-cpu=603e', '', d)}"
meta/conf/machine/include/powerpc/tune-ppc7400.inc +0 -3
@@ -9,6 +9,3 @@ AVAILTUNES += "ppc7400" TUNE_FEATURES:tune-ppc7400 = "m32 fpu-hard ppc7400 altivec bigendian" TUNE_PKGARCH:tune-ppc7400 = "ppc7400" PACKAGE_EXTRA_ARCHS:tune-ppc7400 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc} ppc7400" - -# glibc configure options to get 7400 specific library (for sqrt) -#GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppc7400', '--with-cpu=power4', '', d)}"
meta/conf/machine/include/powerpc/tune-ppce300c3.inc +0 -3
@@ -11,9 +11,6 @@ TUNE_PKGARCH:tune-ppce300c3 = "ppce300c3" PACKAGE_EXTRA_ARCHS:tune-ppce300c3 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc} ppce300c3" TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'ppce300c3', ' -mcpu=e300c3', '', d)}" -# glibc config options to make use of e300c3 (603e) specific sqrt/sqrtf routines -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppce300c3', '--with-cpu=e300c3', '', d)}" - # soft-float TUNEVALID[ppce300c3-nf] = "Enable ppce300c3 specific processor optimizations (no fpu)" TUNE_FEATURES:tune-ppce300c3-nf = "${TUNE_FEATURES:tune-powerpc-nf} ppce300c3-nf"
meta/conf/machine/include/powerpc/tune-ppce500mc.inc +0 -3
@@ -10,8 +10,5 @@ TUNE_FEATURES:tune-ppce500mc = "m32 fpu-hard ppce500mc bigendian" TUNE_PKGARCH:tune-ppce500mc = "ppce500mc" PACKAGE_EXTRA_ARCHS:tune-ppce500mc = "${PACKAGE_EXTRA_ARCHS:tune-powerpc} ppce500mc" -# glibc configure options to get e500mc specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppce500mc', '-with-cpu=e500mc', '', d)}" - # pass -mcpu=e500mc for ppce500mc kernel cross compile TARGET_CC_KERNEL_ARCH = "-mcpu=e500mc"
meta/conf/machine/include/powerpc/tune-ppce5500.inc +0 -3
@@ -16,8 +16,5 @@ BASE_LIB:tune-ppc64e5500 = "lib64" TUNE_PKGARCH:tune-ppc64e5500 = "ppc64e5500" PACKAGE_EXTRA_ARCHS:tune-ppc64e5500 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc64} ppc64e5500" -# glibc configure options to get e5500 specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'e5500', '--with-cpu=e5500', '', d)}" - # QEMU usermode fails with invalid instruction error (YOCTO: #10304) MACHINE_FEATURES_BACKFILL_CONSIDERED:append = "${@bb.utils.contains('TUNE_FEATURES', 'e5500', ' qemu-usermode', '', d)}"
meta/conf/machine/include/powerpc/tune-ppce6500.inc +0 -4
@@ -16,9 +16,5 @@ BASE_LIB:tune-ppc64e6500 = "lib64" TUNE_PKGARCH:tune-ppc64e6500 = "ppc64e6500" PACKAGE_EXTRA_ARCHS:tune-ppc64e6500 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc64} ppc64e6500" -# glibc configure options to get e6500 specific library -GLIBC_EXTRA_OECONF:powerpc64 += "${@bb.utils.contains('TUNE_FEATURES', 'e6500', '--with-cpu=e6500', '', d)}" -GLIBC_EXTRA_OECONF:powerpc += "${@bb.utils.contains('TUNE_FEATURES', 'e6500', '--with-cpu=e6500', '', d)}" - # QEMU usermode fails with invalid instruction error (YOCTO: #10304) MACHINE_FEATURES_BACKFILL_CONSIDERED:append = "${@bb.utils.contains('TUNE_FEATURES', 'e6500', ' qemu-usermode', '', d)}"
Signature · 1 line
2.35.1
Quoted 5 lines · Robert Joslyn
OE-core previously carried patches to glibc that added optimized sqrt implementations for various PowerPC chips. These were recently removed, which now results in errors when compiling glibc with certian PowerPC machine tunes:
Quoted 9 lines
checking sysdep dirs... configure: error: The 603e subspecies of
powerpc is not supported.Remove setting
GLIBC_EXTRA_OECONFwith parameters that are no longer valid. Also remove a commented out setting of the variable that probably isn't vaild anyway.Fixes 2511e937f445 ("glibc: Drop ppc sqrt optimisations")
Ah thanks for patch yes it was forgotten
Quoted 127 lines
Signed-off-by Robert Joslyn <[email protected]>--- meta/conf/machine/include/powerpc/tune-ppc603e.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppc7400.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce300c3.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce500mc.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce5500.inc | 3 --- meta/conf/machine/include/powerpc/tune-ppce6500.inc | 4 ---- 6 files changed, 19 deletions(-)meta/conf/machine/include/powerpc/tune-ppc603e.inc +0
-0@@ -9,6 +9,3 @@ AVAILTUNES += "ppc603e" TUNE_FEATURES:tune-ppc603e = "m32 fpu-hard ppc603e bigendian" TUNE_PKGARCH:tune-ppc603e = "ppc603e" PACKAGE_EXTRA_ARCHS:tune-ppc603e = "${PACKAGE_EXTRA_ARCHS:tune-powerpc}ppc603e"
meta/conf/machine/include/powerpc/tune-ppc603e.inc +0
-3- -# glibc configure options to get 603e specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppc603e','-with-cpu=603e', '', d)}"
meta/conf/machine/include/powerpc/tune-ppc7400.inc +0
-0@@ -9,6 +9,3 @@ AVAILTUNES += "ppc7400" TUNE_FEATURES:tune-ppc7400 = "m32 fpu-hard ppc7400 altivec bigendian" TUNE_PKGARCH:tune-ppc7400 = "ppc7400" PACKAGE_EXTRA_ARCHS:tune-ppc7400 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc}ppc7400"
meta/conf/machine/include/powerpc/tune-ppc7400.inc +0
-3- -# glibc configure options to get 7400 specific library (for sqrt) -#GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppc7400','--with-cpu=power4', '', d)}"
meta/conf/machine/include/powerpc/tune-ppce300c3.inc +0
-0@@ -11,9 +11,6 @@ TUNE_PKGARCH:tune-ppce300c3 = "ppce300c3" PACKAGE_EXTRA_ARCHS:tune-ppce300c3 = "${PACKAGE_EXTRA_ARCHS:tune-powerpc}ppce300c3"
TUNE_CCARGS.= "${@bb.utils.contains('TUNE_FEATURES', 'ppce300c3', 'meta/conf/machine/include/powerpc/tune-ppce300c3.inc +0
-2-mcpu=e300c3', '', d)}" -# glibc config options to make use of e300c3 (603e) specific sqrt/sqrtfroutines
-GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppce300c3', '--with-cpu=e300c3', '', d)}"
-# soft-float TUNEVALID[ppce300c3-nf] = "Enable ppce300c3 specific processor optimizations (no fpu)" TUNE_FEATURES:tune-ppce300c3-nf = "${TUNE_FEATURES:tune-powerpc-nf} ppce300c3-nf"meta/conf/machine/include/powerpc/tune-ppce500mc.inc +0
-0@@ -10,8 +10,5 @@ TUNE_FEATURES:tune-ppce500mc = "m32 fpu-hard ppce500mcbigendian"
TUNE_PKGARCH:tune-ppce500mc = "ppce500mc" PACKAGE_EXTRA_ARCHS:tune-ppce500mc = "${PACKAGE_EXTRA_ARCHS:tune-powerpc}
ppce500mc"meta/conf/machine/include/powerpc/tune-ppce500mc.inc +0
-2-# glibc configure options to get e500mc specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'ppce500mc','-with-cpu=e500mc', '', d)}"
meta/conf/machine/include/powerpc/tune-ppce500mc.inc +0
-1- # pass -mcpu=e500mc for ppce500mc kernel cross compile TARGET_CC_KERNEL_ARCH = "-mcpu=e500mc"meta/conf/machine/include/powerpc/tune-ppce5500.inc +0
-0@@ -16,8 +16,5 @@ BASE_LIB:tune-ppc64e5500 = "lib64" TUNE_PKGARCH:tune-ppc64e5500 = "ppc64e5500" PACKAGE_EXTRA_ARCHS:tune-ppc64e5500 ="${PACKAGE_EXTRA_ARCHS:tune-powerpc64} ppc64e5500"
meta/conf/machine/include/powerpc/tune-ppce5500.inc +0
-2-# glibc configure options to get e5500 specific library (for sqrt) -GLIBC_EXTRA_OECONF += "${@bb.utils.contains('TUNE_FEATURES', 'e5500','--with-cpu=e5500', '', d)}"
-
# QEMU usermode fails with invalid instruction error (YOCTO: #10304) MACHINE_FEATURES_BACKFILL_CONSIDERED:append =
"${@bb.utils.contains('TUNE_FEATURES', 'e5500', ' qemu-usermode', '', d)}"meta/conf/machine/include/powerpc/tune-ppce6500.inc +0
-0@@ -16,9 +16,5 @@ BASE_LIB:tune-ppc64e6500 = "lib64" TUNE_PKGARCH:tune-ppc64e6500 = "ppc64e6500" PACKAGE_EXTRA_ARCHS:tune-ppc64e6500 ="${PACKAGE_EXTRA_ARCHS:tune-powerpc64} ppc64e6500"
meta/conf/machine/include/powerpc/tune-ppce6500.inc +0
-2-# glibc configure options to get e6500 specific library -GLIBC_EXTRA_OECONF:powerpc64 += "${@bb.utils.contains('TUNE_FEATURES','e6500', '--with-cpu=e6500', '', d)}" -GLIBC_EXTRA_OECONF:powerpc += "${@bb.utils.contains('TUNE_FEATURES', 'e6500', '--with-cpu=e6500', '', d)}"
-
# QEMU usermode fails with invalid instruction error (YOCTO: #10304) MACHINE_FEATURES_BACKFILL_CONSIDERED:append =
"${@bb.utils.contains('TUNE_FEATURES', 'e6500', ' qemu-usermode', '', d)}" --
2.35.1-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#165069):
https://lists.openembedded.org/g/openembedded-core/message/165069
Mute This Topic: https://lists.openembedded.org/mt/90796368/1997914
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-