Skip to contentSkip to conversation

riscv: Optimize atomic implementation

PATCH In review [email protected] 5 participants 24 messages May 5, 2022 – Aug 9, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover riscv: Optimize atomic implementation

From: Guo Ren <[email protected]>

Here are some optimizations for riscv atomic implementation, the first three patches are normal cleanup and custom implementation without relating to atomic semantics.

The 4th is the same as arm64 LSE with using embedded .aq/.rl annotation.

The 5th is good for riscv implementation with reducing a full-barrier cost.

Changes in V4:
- Coding convention & optimize the comments
- Re-order the patchset

Changes in V3:
- Fixup usage of lr.rl & sc.aq with violation of ISA
- Add Optimize dec_if_positive functions
- Add conditional atomic operations' optimization

Changes in V2:
- Fixup LR/SC memory barrier semantic problems which pointed by Rutland
- Combine patches into one patchset series
- Separate AMO optimization & LRSC optimization for convenience patch review

Guo Ren (5):
riscv: atomic: Cleanup unnecessary definition
riscv: atomic: Optimize acquire and release for AMO operations
riscv: atomic: Optimize memory barrier semantics of LRSC-pairs
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Add conditional atomic operations' optimization

Guo Ren (5):
riscv: atomic: Cleanup unnecessary definition
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize atomic_ops & xchg with .aq/rl annotation
riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

 arch/riscv/include/asm/atomic.h  | 174 +++++++++++++++++++++++++++----
 arch/riscv/include/asm/cmpxchg.h |  30 ++----
 2 files changed, 162 insertions(+), 42 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v4 1/5 riscv: atomic: Cleanup unnecessary definition

From: Guo Ren <[email protected]>

The cmpxchg32 & cmpxchg32_local are not used in Linux anymore. So clean up asm/cmpxchg.h.

Cc Palmer Dabbelt <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Mark Rutland <[email protected]>
---
 arch/riscv/include/asm/cmpxchg.h | 12 ------------
 1 file changed, 12 deletions(-)
arch/riscv/include/asm/cmpxchg.h +0 -12
index 36dc962f6343..12debce235e5 100644
@@ -348,18 +348,6 @@
 #define arch_cmpxchg_local(ptr, o, n)					\
 	(__cmpxchg_relaxed((ptr), (o), (n), sizeof(*(ptr))))
 
-#define cmpxchg32(ptr, o, n)						\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 4);				\
-	arch_cmpxchg((ptr), (o), (n));					\
-})
-
-#define cmpxchg32_local(ptr, o, n)					\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 4);				\
-	arch_cmpxchg_relaxed((ptr), (o), (n))				\
-})
-
 #define arch_cmpxchg64(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
Signature · 1 line
2.25.1
#2 lore raw

PATCH v4 2/5 riscv: atomic: Optimize dec_if_positive functions

In reply to [email protected]

From: Guo Ren <[email protected]>

Current implementation wastes another register to pass the argument, but we only need addi to calculate the result. Optimize the code with minimize the usage of registers.

Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
arch/riscv/include/asm/atomic.h +10 -10
index ac9bdf4fc404..f3c6a6eac02a 100644
@@ -310,47 +310,47 @@ ATOMIC_OPS()
 #undef ATOMIC_OPS
 #undef ATOMIC_OP
 
-static __always_inline int arch_atomic_sub_if_positive(atomic_t *v, int offset)
+static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
 {
        int prev, rc;
 
 	__asm__ __volatile__ (
 		"0:	lr.w     %[p],  %[c]\n"
-		"	sub      %[rc], %[p], %[o]\n"
+		"	addi     %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
 		"	sc.w.rl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
 		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
-		: [o]"r" (offset)
+		:
 		: "memory");
-	return prev - offset;
+	return prev - 1;
 }
 
-#define arch_atomic_dec_if_positive(v)	arch_atomic_sub_if_positive(v, 1)
+#define arch_atomic_dec_if_positive arch_atomic_dec_if_positive
 
 #ifndef CONFIG_GENERIC_ATOMIC64
-static __always_inline s64 arch_atomic64_sub_if_positive(atomic64_t *v, s64 offset)
+static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
        s64 prev;
        long rc;
 
 	__asm__ __volatile__ (
 		"0:	lr.d     %[p],  %[c]\n"
-		"	sub      %[rc], %[p], %[o]\n"
+		"	addi      %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
 		"	sc.d.rl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
 		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
-		: [o]"r" (offset)
+		:
 		: "memory");
-	return prev - offset;
+	return prev - 1;
 }
 
-#define arch_atomic64_dec_if_positive(v)	arch_atomic64_sub_if_positive(v, 1)
+#define arch_atomic64_dec_if_positive	arch_atomic64_dec_if_positive
 #endif
 
 #endif /* _ASM_RISCV_ATOMIC_H */
Signature · 7 lines
2.25.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#3 lore raw

PATCH v4 3/5 riscv: atomic: Add custom conditional atomic operation implementation

In reply to [email protected]

From: Guo Ren <[email protected]>

Add conditional atomic operations' custom implementation (similar to dec_if_positive), here is the list:
- arch_atomic_inc_unless_negative
- arch_atomic_dec_unless_positive
- arch_atomic64_inc_unless_negative
- arch_atomic64_dec_unless_positive

Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Andrea Parri <[email protected]>
Cc Dan Lustig <[email protected]>
---
 arch/riscv/include/asm/atomic.h | 82 +++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
arch/riscv/include/asm/atomic.h +82 -0
index f3c6a6eac02a..0dfe9d857a76 100644
@@ -310,6 +310,46 @@ ATOMIC_OPS()
 #undef ATOMIC_OPS
 #undef ATOMIC_OP
 
+static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
+{
+	int prev, rc;
+
+	__asm__ __volatile__ (
+		"0:	lr.w      %[p],  %[c]\n"
+		"	bltz      %[p],  1f\n"
+		"	addi      %[rc], %[p], 1\n"
+		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	bnez      %[rc], 0b\n"
+		"	fence     rw, rw\n"
+		"1:\n"
+		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
+		:
+		: "memory");
+	return !(prev < 0);
+}
+
+#define arch_atomic_inc_unless_negative arch_atomic_inc_unless_negative
+
+static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
+{
+	int prev, rc;
+
+	__asm__ __volatile__ (
+		"0:	lr.w      %[p],  %[c]\n"
+		"	bgtz      %[p],  1f\n"
+		"	addi      %[rc], %[p], -1\n"
+		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	bnez      %[rc], 0b\n"
+		"	fence     rw, rw\n"
+		"1:\n"
+		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
+		:
+		: "memory");
+	return !(prev > 0);
+}
+
+#define arch_atomic_dec_unless_positive arch_atomic_dec_unless_positive
+
 static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
 {
        int prev, rc;
@@ -331,6 +371,48 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
 #define arch_atomic_dec_if_positive arch_atomic_dec_if_positive
 
 #ifndef CONFIG_GENERIC_ATOMIC64
+static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
+{
+	s64 prev;
+	long rc;
+
+	__asm__ __volatile__ (
+		"0:	lr.d      %[p],  %[c]\n"
+		"	bltz      %[p],  1f\n"
+		"	addi      %[rc], %[p], 1\n"
+		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	bnez      %[rc], 0b\n"
+		"	fence     rw, rw\n"
+		"1:\n"
+		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
+		:
+		: "memory");
+	return !(prev < 0);
+}
+
+#define arch_atomic64_inc_unless_negative arch_atomic64_inc_unless_negative
+
+static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
+{
+	s64 prev;
+	long rc;
+
+	__asm__ __volatile__ (
+		"0:	lr.d      %[p],  %[c]\n"
+		"	bgtz      %[p],  1f\n"
+		"	addi      %[rc], %[p], -1\n"
+		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	bnez      %[rc], 0b\n"
+		"	fence     rw, rw\n"
+		"1:\n"
+		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
+		:
+		: "memory");
+	return !(prev > 0);
+}
+
+#define arch_atomic64_dec_unless_positive arch_atomic64_dec_unless_positive
+
 static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
        s64 prev;
Signature · 1 line
2.25.1
#4 lore raw

PATCH v4 4/5 riscv: atomic: Optimize atomic_ops & xchg with .aq/rl annotation

In reply to [email protected]

From: Guo Ren <[email protected]>

Current atomic_ops' acquire & release implementations are using fence instruction which causes another extra bad "fence r/fence ,w" performance effect. They are too heavy for Linux atomic acquire & release semantic requirements. RISC-V AMO instructions could embed aquire and release into AMO instructions. Here is the related description from RISC-V ISA spec:

To help implement multiprocessor synchronization, the AMOs optionally provide release consistency semantics.
- .aq: If the aq bit is set, then no later memory operations
in this RISC-V hart can be observed to take place before the AMO.
- .rl: If the rl bit is set, then other RISC-V harts will not
observe the AMO before memory accesses preceding the AMO in this RISC-V hart.
- .aqrl: Setting both the aq and the rl bit on an AMO makes the sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Let's use the above to optimize riscv atomic performance, just like arm64/include/asm/atomic_lse.h.

Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Andrea Parri <[email protected]>
Cc Dan Lustig <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 64 ++++++++++++++++++++++++++++++++
 arch/riscv/include/asm/cmpxchg.h | 12 ++----
 2 files changed, 68 insertions(+), 8 deletions(-)
arch/riscv/include/asm/atomic.h +64 -0
index 0dfe9d857a76..34f757dfc8f2 100644
@@ -99,6 +99,30 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,		\
 	return ret;							\
 }									\
 static __always_inline							\
+c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,		\
+					     atomic##prefix##_t *v)	\
+{									\
+	register c_type ret;						\
+	__asm__ __volatile__ (						\
+		"	amo" #asm_op "." #asm_type ".aq %1, %2, %0"	\
+		: "+A" (v->counter), "=r" (ret)				\
+		: "r" (I)						\
+		: "memory");						\
+	return ret;							\
+}									\
+static __always_inline							\
+c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,		\
+					     atomic##prefix##_t *v)	\
+{									\
+	register c_type ret;						\
+	__asm__ __volatile__ (						\
+		"	amo" #asm_op "." #asm_type ".rl %1, %2, %0"	\
+		: "+A" (v->counter), "=r" (ret)				\
+		: "r" (I)						\
+		: "memory");						\
+	return ret;							\
+}									\
+static __always_inline							\
 c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)	\
 {									\
 	register c_type ret;						\
@@ -118,6 +142,18 @@ c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,		\
         return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;	\
 }									\
 static __always_inline							\
+c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,		\
+					      atomic##prefix##_t *v)	\
+{									\
+        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;	\
+}									\
+static __always_inline							\
+c_type arch_atomic##prefix##_##op##_return_release(c_type i,		\
+					      atomic##prefix##_t *v)	\
+{									\
+        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;	\
+}									\
+static __always_inline							\
 c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)	\
 {									\
         return arch_atomic##prefix##_fetch_##op(i, v) c_op I;		\
@@ -140,22 +176,38 @@ ATOMIC_OPS(sub, add, +, -i)
 
 #define arch_atomic_add_return_relaxed	arch_atomic_add_return_relaxed
 #define arch_atomic_sub_return_relaxed	arch_atomic_sub_return_relaxed
+#define arch_atomic_add_return_acquire	arch_atomic_add_return_acquire
+#define arch_atomic_sub_return_acquire	arch_atomic_sub_return_acquire
+#define arch_atomic_add_return_release	arch_atomic_add_return_release
+#define arch_atomic_sub_return_release	arch_atomic_sub_return_release
 #define arch_atomic_add_return		arch_atomic_add_return
 #define arch_atomic_sub_return		arch_atomic_sub_return
 
 #define arch_atomic_fetch_add_relaxed	arch_atomic_fetch_add_relaxed
 #define arch_atomic_fetch_sub_relaxed	arch_atomic_fetch_sub_relaxed
+#define arch_atomic_fetch_add_acquire	arch_atomic_fetch_add_acquire
+#define arch_atomic_fetch_sub_acquire	arch_atomic_fetch_sub_acquire
+#define arch_atomic_fetch_add_release	arch_atomic_fetch_add_release
+#define arch_atomic_fetch_sub_release	arch_atomic_fetch_sub_release
 #define arch_atomic_fetch_add		arch_atomic_fetch_add
 #define arch_atomic_fetch_sub		arch_atomic_fetch_sub
 
 #ifndef CONFIG_GENERIC_ATOMIC64
 #define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
 #define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_add_return_acquire	arch_atomic64_add_return_acquire
+#define arch_atomic64_sub_return_acquire	arch_atomic64_sub_return_acquire
+#define arch_atomic64_add_return_release	arch_atomic64_add_return_release
+#define arch_atomic64_sub_return_release	arch_atomic64_sub_return_release
 #define arch_atomic64_add_return		arch_atomic64_add_return
 #define arch_atomic64_sub_return		arch_atomic64_sub_return
 
 #define arch_atomic64_fetch_add_relaxed	arch_atomic64_fetch_add_relaxed
 #define arch_atomic64_fetch_sub_relaxed	arch_atomic64_fetch_sub_relaxed
+#define arch_atomic64_fetch_add_acquire	arch_atomic64_fetch_add_acquire
+#define arch_atomic64_fetch_sub_acquire	arch_atomic64_fetch_sub_acquire
+#define arch_atomic64_fetch_add_release	arch_atomic64_fetch_add_release
+#define arch_atomic64_fetch_sub_release	arch_atomic64_fetch_sub_release
 #define arch_atomic64_fetch_add		arch_atomic64_fetch_add
 #define arch_atomic64_fetch_sub		arch_atomic64_fetch_sub
 #endif
@@ -178,6 +230,12 @@ ATOMIC_OPS(xor, xor, i)
 #define arch_atomic_fetch_and_relaxed	arch_atomic_fetch_and_relaxed
 #define arch_atomic_fetch_or_relaxed	arch_atomic_fetch_or_relaxed
 #define arch_atomic_fetch_xor_relaxed	arch_atomic_fetch_xor_relaxed
+#define arch_atomic_fetch_and_acquire	arch_atomic_fetch_and_acquire
+#define arch_atomic_fetch_or_acquire	arch_atomic_fetch_or_acquire
+#define arch_atomic_fetch_xor_acquire	arch_atomic_fetch_xor_acquire
+#define arch_atomic_fetch_and_release	arch_atomic_fetch_and_release
+#define arch_atomic_fetch_or_release	arch_atomic_fetch_or_release
+#define arch_atomic_fetch_xor_release	arch_atomic_fetch_xor_release
 #define arch_atomic_fetch_and		arch_atomic_fetch_and
 #define arch_atomic_fetch_or		arch_atomic_fetch_or
 #define arch_atomic_fetch_xor		arch_atomic_fetch_xor
@@ -186,6 +244,12 @@ ATOMIC_OPS(xor, xor, i)
 #define arch_atomic64_fetch_and_relaxed	arch_atomic64_fetch_and_relaxed
 #define arch_atomic64_fetch_or_relaxed	arch_atomic64_fetch_or_relaxed
 #define arch_atomic64_fetch_xor_relaxed	arch_atomic64_fetch_xor_relaxed
+#define arch_atomic64_fetch_and_acquire	arch_atomic64_fetch_and_acquire
+#define arch_atomic64_fetch_or_acquire	arch_atomic64_fetch_or_acquire
+#define arch_atomic64_fetch_xor_acquire	arch_atomic64_fetch_xor_acquire
+#define arch_atomic64_fetch_and_release	arch_atomic64_fetch_and_release
+#define arch_atomic64_fetch_or_release	arch_atomic64_fetch_or_release
+#define arch_atomic64_fetch_xor_release	arch_atomic64_fetch_xor_release
 #define arch_atomic64_fetch_and		arch_atomic64_fetch_and
 #define arch_atomic64_fetch_or		arch_atomic64_fetch_or
 #define arch_atomic64_fetch_xor		arch_atomic64_fetch_xor
arch/riscv/include/asm/cmpxchg.h +4 -8
index 12debce235e5..1af8db92250b 100644
@@ -52,16 +52,14 @@
 	switch (size) {							\
 	case 4:								\
 		__asm__ __volatile__ (					\
-			"	amoswap.w %0, %2, %1\n"			\
-			RISCV_ACQUIRE_BARRIER				\
+			"	amoswap.w.aq %0, %2, %1\n"		\
 			: "=r" (__ret), "+A" (*__ptr)			\
 			: "r" (__new)					\
 			: "memory");					\
 		break;							\
 	case 8:								\
 		__asm__ __volatile__ (					\
-			"	amoswap.d %0, %2, %1\n"			\
-			RISCV_ACQUIRE_BARRIER				\
+			"	amoswap.d.aq %0, %2, %1\n"		\
 			: "=r" (__ret), "+A" (*__ptr)			\
 			: "r" (__new)					\
 			: "memory");					\
@@ -87,16 +85,14 @@
 	switch (size) {							\
 	case 4:								\
 		__asm__ __volatile__ (					\
-			RISCV_RELEASE_BARRIER				\
-			"	amoswap.w %0, %2, %1\n"			\
+			"	amoswap.w.rl %0, %2, %1\n"		\
 			: "=r" (__ret), "+A" (*__ptr)			\
 			: "r" (__new)					\
 			: "memory");					\
 		break;							\
 	case 8:								\
 		__asm__ __volatile__ (					\
-			RISCV_RELEASE_BARRIER				\
-			"	amoswap.d %0, %2, %1\n"			\
+			"	amoswap.d.rl %0, %2, %1\n"		\
 			: "=r" (__ret), "+A" (*__ptr)			\
 			: "r" (__new)					\
 			: "memory");					\
Signature · 1 line
2.25.1
#5 lore raw

PATCH v4 5/5 riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

In reply to [email protected]

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
 		"0:	lr.w     %[p],  %[c]\n"
 		"	beq      %[p],  %[u], 1f\n"
 		"	add      %[rc], %[p], %[a]\n"
-		"	sc.w.rl  %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		: [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
 		"0:	lr.d     %[p],  %[c]\n"
 		"	beq      %[p],  %[u], 1f\n"
 		"	add      %[rc], %[p], %[a]\n"
-		"	sc.d.rl  %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		: [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
 		"0:	lr.w      %[p],  %[c]\n"
 		"	bltz      %[p],  1f\n"
 		"	addi      %[rc], %[p], 1\n"
-		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
 		"0:	lr.w      %[p],  %[c]\n"
 		"	bgtz      %[p],  1f\n"
 		"	addi      %[rc], %[p], -1\n"
-		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
 		"0:	lr.w     %[p],  %[c]\n"
 		"	addi     %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
-		"	sc.w.rl  %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
 		"0:	lr.d      %[p],  %[c]\n"
 		"	bltz      %[p],  1f\n"
 		"	addi      %[rc], %[p], 1\n"
-		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
 		"0:	lr.d      %[p],  %[c]\n"
 		"	bgtz      %[p],  1f\n"
 		"	addi      %[rc], %[p], -1\n"
-		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 		"0:	lr.d     %[p],  %[c]\n"
 		"	addi      %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
-		"	sc.d.rl  %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
 		__asm__ __volatile__ (					\
 			"0:	lr.w %0, %2\n"				\
 			"	bne  %0, %z3, 1f\n"			\
-			"	sc.w.rl %1, %z4, %2\n"			\
+			"	sc.w.aqrl %1, %z4, %2\n"		\
 			"	bnez %1, 0b\n"				\
-			"	fence rw, rw\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
 			: "rJ" ((long)__old), "rJ" (__new)		\
@@ -319,9 +318,8 @@
 		__asm__ __volatile__ (					\
 			"0:	lr.d %0, %2\n"				\
 			"	bne %0, %z3, 1f\n"			\
-			"	sc.d.rl %1, %z4, %2\n"			\
+			"	sc.d.aqrl %1, %z4, %2\n"		\
 			"	bnez %1, 0b\n"				\
-			"	fence rw, rw\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
 			: "rJ" (__old), "rJ" (__new)			\
Signature · 1 line
2.25.1
maintainer
#6 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 26 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

Quoted 3 lines

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

   diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
   index 34f757dfc8f2..0bde499fa8bc 100644
   --- a/arch/riscv/include/asm/atomic.h
   +++ b/arch/riscv/include/asm/atomic.h
   @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
     * versions, while the logical ops only have fetch versions.
     */
    #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)	\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,		\
   -					     atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,			\
   +					   atomic##prefix##_t *v)	\
    {									\
    	register c_type ret;						\
    	__asm__ __volatile__ (						\
   @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,		\
    		: "memory");						\
    	return ret;							\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,		\
   -					     atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,			\
   +					   atomic##prefix##_t *v)	\
    {									\
    	register c_type ret;						\
    	__asm__ __volatile__ (						\
   @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,		\
    		: "memory");						\
    	return ret;							\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,		\
   -					     atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_fetch_##op##_release(c_type i,			\
   +					   atomic##prefix##_t *v)	\
    {									\
    	register c_type ret;						\
    	__asm__ __volatile__ (						\
   @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,		\
    		: "memory");						\
    	return ret;							\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)	\
    {									\
    	register c_type ret;						\
    	__asm__ __volatile__ (						\
   @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)	\
    }
    #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)	\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,		\
   -					      atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_##op##_return_relaxed(c_type i,			\
   +					    atomic##prefix##_t *v)	\
    {									\
   -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;	\
   +	return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;	\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,		\
   -					      atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_##op##_return_acquire(c_type i,			\
   +					    atomic##prefix##_t *v)	\
    {									\
   -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;	\
   +	return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;	\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_##op##_return_release(c_type i,		\
   -					      atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_##op##_return_release(c_type i,			\
   +					    atomic##prefix##_t *v)	\
    {									\
   -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;	\
   +	return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;	\
    }									\
   -static __always_inline							\
   -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)	\
   +static __always_inline c_type						\
   +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)	\
    {									\
   -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;		\
   +	return arch_atomic##prefix##_fetch_##op(i, v) c_op I;		\
    }
   
    #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 130 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
 		"0:	lr.w     %[p],  %[c]\n"
 		"	beq      %[p],  %[u], 1f\n"
 		"	add      %[rc], %[p], %[a]\n"
-		"	sc.w.rl  %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		: [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
 		"0:	lr.d     %[p],  %[c]\n"
 		"	beq      %[p],  %[u], 1f\n"
 		"	add      %[rc], %[p], %[a]\n"
-		"	sc.d.rl  %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl  %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		: [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
 		"0:	lr.w      %[p],  %[c]\n"
 		"	bltz      %[p],  1f\n"
 		"	addi      %[rc], %[p], 1\n"
-		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
 		"0:	lr.w      %[p],  %[c]\n"
 		"	bgtz      %[p],  1f\n"
 		"	addi      %[rc], %[p], -1\n"
-		"	sc.w.rl   %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
 		"0:	lr.w     %[p],  %[c]\n"
 		"	addi     %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
-		"	sc.w.rl  %[rc], %[rc], %[c]\n"
+		"	sc.w.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
 		"0:	lr.d      %[p],  %[c]\n"
 		"	bltz      %[p],  1f\n"
 		"	addi      %[rc], %[p], 1\n"
-		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
 		"0:	lr.d      %[p],  %[c]\n"
 		"	bgtz      %[p],  1f\n"
 		"	addi      %[rc], %[p], -1\n"
-		"	sc.d.rl   %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez      %[rc], 0b\n"
-		"	fence     rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 		"0:	lr.d     %[p],  %[c]\n"
 		"	addi      %[rc], %[p], -1\n"
 		"	bltz     %[rc], 1f\n"
-		"	sc.d.rl  %[rc], %[rc], %[c]\n"
+		"	sc.d.aqrl %[rc], %[rc], %[c]\n"
 		"	bnez     %[rc], 0b\n"
-		"	fence    rw, rw\n"
 		"1:\n"
 		: [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
 		:
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
 		__asm__ __volatile__ (					\
 			"0:	lr.w %0, %2\n"				\
 			"	bne  %0, %z3, 1f\n"			\
-			"	sc.w.rl %1, %z4, %2\n"			\
+			"	sc.w.aqrl %1, %z4, %2\n"		\
 			"	bnez %1, 0b\n"				\
-			"	fence rw, rw\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
 			: "rJ" ((long)__old), "rJ" (__new)		\
@@ -319,9 +318,8 @@
 		__asm__ __volatile__ (					\
 			"0:	lr.d %0, %2\n"				\
 			"	bne %0, %z3, 1f\n"			\
-			"	sc.d.rl %1, %z4, %2\n"			\
+			"	sc.d.aqrl %1, %z4, %2\n"		\
 			"	bnez %1, 0b\n"				\
-			"	fence rw, rw\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
 			: "rJ" (__old), "rJ" (__new)			\
author
#7 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 28 lines · Palmer Dabbelt
Quoted 26 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

Quoted 7 lines
Quoted 3 lines

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences")

Thx for explaining, that why I suspected with the sentence in the comment:
"which do not give full-ordering with .aqrl"

Quoted 3 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Quoted 9 lines

given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

Thx for the fixup.

Quoted 231 lines
    diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
    index 34f757dfc8f2..0bde499fa8bc 100644
    --- a/arch/riscv/include/asm/atomic.h
    +++ b/arch/riscv/include/asm/atomic.h
    @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
      * versions, while the logical ops only have fetch versions.
      */
     #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)   \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,               \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_release(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)   \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)  \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)      \
     }

     #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)    \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_relaxed(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_acquire(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_release(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_release(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)        \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)       \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;              \
    +   return arch_atomic##prefix##_fetch_##op(i, v) c_op I;           \
     }

     #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 130 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
              "0:     lr.w     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
              "0:     lr.d     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
              "0:     lr.w     %[p],  %[c]\n"
              "       addi     %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
              "0:     lr.d     %[p],  %[c]\n"
              "       addi      %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.w %0, %2\n"                          \
                      "       bne  %0, %z3, 1f\n"                     \
-                     "       sc.w.rl %1, %z4, %2\n"                  \
+                     "       sc.w.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" ((long)__old), "rJ" (__new)              \
@@ -319,9 +318,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.d %0, %2\n"                          \
                      "       bne %0, %z3, 1f\n"                      \
-                     "       sc.d.rl %1, %z4, %2\n"                  \
+                     "       sc.d.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" (__old), "rJ" (__new)                    \
Signature · 4 lines
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/
maintainer
#8 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 33 lines · On Sun, 22 May 2022 06:12:56 PDT (-0700), [email protected] wrote:
Quoted 32 lines · Palmer Dabbelt
Quoted 29 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

Quoted 5 lines
Quoted 3 lines

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences")

Thx for explaining, that why I suspected with the sentence in the comment:
"which do not give full-ordering with .aqrl"

Sorry, I'm not quite sure what you're saying here. My understanding is that this change results in mappings that violate LKMM, based on the rationale in that previous commit. IIUC that all still holds, but I'm not really a memory model person so I frequently miss stuff around there.

Quoted 5 lines
Quoted 3 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

I can definately buy the argument that we have mappings of various application memory models that are difficult to make fast given the ISA encodings of RVWMO we have, but that's not really an issue we can fix in the atomic mappings.

Quoted 242 lines
Quoted 9 lines

given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

Thx for the fixup.

Quoted 231 lines
    diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
    index 34f757dfc8f2..0bde499fa8bc 100644
    --- a/arch/riscv/include/asm/atomic.h
    +++ b/arch/riscv/include/asm/atomic.h
    @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
      * versions, while the logical ops only have fetch versions.
      */
     #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)   \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,               \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_release(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)   \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)  \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)      \
     }

     #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)    \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_relaxed(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_acquire(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_release(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_release(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)        \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)       \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;              \
    +   return arch_atomic##prefix##_fetch_##op(i, v) c_op I;           \
     }

     #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 130 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
              "0:     lr.w     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
              "0:     lr.d     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
              "0:     lr.w     %[p],  %[c]\n"
              "       addi     %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
              "0:     lr.d     %[p],  %[c]\n"
              "       addi      %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.w %0, %2\n"                          \
                      "       bne  %0, %z3, 1f\n"                     \
-                     "       sc.w.rl %1, %z4, %2\n"                  \
+                     "       sc.w.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" ((long)__old), "rJ" (__new)              \
@@ -319,9 +318,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.d %0, %2\n"                          \
                      "       bne %0, %z3, 1f\n"                      \
-                     "       sc.d.rl %1, %z4, %2\n"                  \
+                     "       sc.d.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" (__old), "rJ" (__new)                    \
author
#9 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 38 lines · Palmer Dabbelt
Quoted 36 lines · On Sun, 22 May 2022 06:12:56 PDT (-0700), [email protected] wrote:
Quoted 35 lines · Palmer Dabbelt
Quoted 26 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

Quoted 3 lines

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences")

Quoted 8 lines
Quoted 2 lines

Thx for explaining, that why I suspected with the sentence in the comment:
"which do not give full-ordering with .aqrl"

Sorry, I'm not quite sure what you're saying here. My understanding is that this change results in mappings that violate LKMM, based on the rationale in that previous commit. IIUC that all still holds, but I'm not really a memory model person so I frequently miss stuff around there.

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw
------

Quoted 9 lines

2. Using .aqrl to replace the fence rw, rw is okay to ISA manual, right? And reducing a fence instruction to gain better performance:

                "0:     lr.w     %[p],  %[c]\n"
                 "       sub      %[rc], %[p], %[o]\n"
                 "       bltz     %[rc], 1f\n".
 -               "       sc.w.rl  %[rc], %[rc], %[c]\n"
 +              "       sc.w.aqrl %[rc], %[rc], %[c]\n"
                 "       bnez     %[rc], 0b\n"
 -               "       fence    rw, rw\n"

Yes, using .aqrl is valid.

Dan
------

Quoted 248 lines

I can definately buy the argument that we have mappings of various application memory models that are difficult to make fast given the ISA encodings of RVWMO we have, but that's not really an issue we can fix in the atomic mappings.

Quoted 242 lines
Quoted 9 lines

given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

Thx for the fixup.

Quoted 231 lines
    diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
    index 34f757dfc8f2..0bde499fa8bc 100644
    --- a/arch/riscv/include/asm/atomic.h
    +++ b/arch/riscv/include/asm/atomic.h
    @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
      * versions, while the logical ops only have fetch versions.
      */
     #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)   \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,               \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_release(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)   \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)  \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)      \
     }

     #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)    \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_relaxed(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_acquire(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_release(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_release(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)        \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)       \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;              \
    +   return arch_atomic##prefix##_fetch_##op(i, v) c_op I;           \
     }

     #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 130 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
              "0:     lr.w     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
              "0:     lr.d     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
              "0:     lr.w     %[p],  %[c]\n"
              "       addi     %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
              "0:     lr.d     %[p],  %[c]\n"
              "       addi      %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.w %0, %2\n"                          \
                      "       bne  %0, %z3, 1f\n"                     \
-                     "       sc.w.rl %1, %z4, %2\n"                  \
+                     "       sc.w.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" ((long)__old), "rJ" (__new)              \
@@ -319,9 +318,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.d %0, %2\n"                          \
                      "       bne %0, %z3, 1f\n"                      \
-                     "       sc.d.rl %1, %z4, %2\n"                  \
+                     "       sc.d.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" (__old), "rJ" (__new)                    \
Signature · 9 lines
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#10 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Guo,

Quoted 42 lines · Guo Ren
Quoted 41 lines · Palmer Dabbelt
Quoted 38 lines · On Sun, 22 May 2022 06:12:56 PDT (-0700), [email protected] wrote:
Quoted 28 lines · Palmer Dabbelt
Quoted 26 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

Quoted 7 lines
Quoted 3 lines

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences")

Thx for explaining, that why I suspected with the sentence in the comment:
"which do not give full-ordering with .aqrl"

Quoted 8 lines
Quoted 5 lines

Sorry, I'm not quite sure what you're saying here. My understanding is that this change results in mappings that violate LKMM, based on the rationale in that previous commit. IIUC that all still holds, but I'm not really a memory model person so I frequently miss stuff around there.

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

Andrea

Quoted 273 lines

------

Quoted 9 lines

2. Using .aqrl to replace the fence rw, rw is okay to ISA manual, right? And reducing a fence instruction to gain better performance:

                "0:     lr.w     %[p],  %[c]\n"
                 "       sub      %[rc], %[p], %[o]\n"
                 "       bltz     %[rc], 1f\n".
 -               "       sc.w.rl  %[rc], %[rc], %[c]\n"
 +              "       sc.w.aqrl %[rc], %[rc], %[c]\n"
                 "       bnez     %[rc], 0b\n"
 -               "       fence    rw, rw\n"

Yes, using .aqrl is valid.

Dan
------

Quoted 248 lines

I can definately buy the argument that we have mappings of various application memory models that are difficult to make fast given the ISA encodings of RVWMO we have, but that's not really an issue we can fix in the atomic mappings.

Quoted 242 lines
Quoted 9 lines

given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

Thx for the fixup.

Quoted 231 lines
    diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
    index 34f757dfc8f2..0bde499fa8bc 100644
    --- a/arch/riscv/include/asm/atomic.h
    +++ b/arch/riscv/include/asm/atomic.h
    @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
      * versions, while the logical ops only have fetch versions.
      */
     #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)   \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,               \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_release(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)   \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)  \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)      \
     }

     #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)    \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_relaxed(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_acquire(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_release(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_release(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)        \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)       \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;              \
    +   return arch_atomic##prefix##_fetch_##op(i, v) c_op I;           \
     }

     #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 130 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
              "0:     lr.w     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
              "0:     lr.d     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
              "0:     lr.w     %[p],  %[c]\n"
              "       addi     %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
              "0:     lr.d     %[p],  %[c]\n"
              "       addi      %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
arch/riscv/include/asm/cmpxchg.h +2 -4
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.w %0, %2\n"                          \
                      "       bne  %0, %z3, 1f\n"                     \
-                     "       sc.w.rl %1, %z4, %2\n"                  \
+                     "       sc.w.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" ((long)__old), "rJ" (__new)              \
@@ -319,9 +318,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.d %0, %2\n"                          \
                      "       bne %0, %z3, 1f\n"                      \
-                     "       sc.d.rl %1, %z4, %2\n"                  \
+                     "       sc.d.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" (__old), "rJ" (__new)                    \
Signature · 4 lines
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/
#11 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

	Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

	https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#12 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

	Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

	https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#13 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 111 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

	Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

	https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

Quoted 9 lines

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Well, first it's not my code ;-)

The thing is that this patch proposed by Guo Ren kinda fixes/revertes a previous commit 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences"). It looks to me that Guo Ren's patch fits the current RISCV memory model and Linux kernel memory model, but the question is that commit 5ce6c1f3535f was also a fix, so why do we change things back and forth? If I understand correctly, this is also what Palmer and Andrea asked for.

My understanding is that commit 5ce6c1f3535f was based on a draft RVWMO that was different than the current one. I'd love to record this difference in the commit log of Guo Ren's patch, so that later on we know why we changed things back and forth. To do so, the confirmation from RVWMO authors is helpful.

Hope that I make things more clear ;-)

Regards,
Boqun

Quoted 9 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

maintainer
#14 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 124 lines · On Thu, 23 Jun 2022 10:55:11 PDT (-0700), [email protected] wrote:
Quoted 111 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

	Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

	https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

Quoted 9 lines

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Well, first it's not my code ;-)

Quoted 7 lines

The thing is that this patch proposed by Guo Ren kinda fixes/revertes a previous commit 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences"). It looks to me that Guo Ren's patch fits the current RISCV memory model and Linux kernel memory model, but the question is that commit 5ce6c1f3535f was also a fix, so why do we change things back and forth? If I understand correctly, this is also what Palmer and Andrea asked for.

That's essentially my confusion. I'm not really a formal memory model guy so I can easily get lost in these bits, but when I saw it I remembered having looked at a fix before. I dug that up, saw it was from someone who likley knows a lot more about formal memory models than I do, and thus figured I'd ask everyone to see what's up.

IMO if that original fix was made to a pre-ratification version of WMO, this new version is legal WRT the ratified WMO then the code change is fine to take on for-next. That said, we should be explicit about why it's legal and why the reasoning in the previous patch is no loger connect, just to make sure everyone can follow along.

Quoted 5 lines

My understanding is that commit 5ce6c1f3535f was based on a draft RVWMO that was different than the current one. I'd love to record this difference in the commit log of Guo Ren's patch, so that later on we know why we changed things back and forth. To do so, the confirmation from RVWMO authors is helpful.

Agreed. IMO that's always good hygine, but it's extra important when we're dealing with external specifications in a complex field like formal models.

Quoted 14 lines

Hope that I make things more clear ;-)

Regards,
Boqun

Quoted 9 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

author
#15 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

In reply to Boqun Feng

q

Quoted 125 lines · Boqun Feng
Quoted 111 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

    Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

    https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

Quoted 9 lines

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Well, first it's not my code ;-)

Quoted 7 lines

The thing is that this patch proposed by Guo Ren kinda fixes/revertes a previous commit 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences"). It looks to me that Guo Ren's patch fits the current RISCV memory model and Linux kernel memory model, but the question is that commit 5ce6c1f3535f was also a fix, so why do we change things back and forth? If I understand correctly, this is also what Palmer and Andrea asked for.

I think the patch is still a little different from 5ce6c1f3535f:

before:
lr.w.aqrl + sc.w.aqrl

5ce6c1f3535f:
lr.w + sc.w.rl + fence

this patch:
lr.w + sc.w.aqrl

Quoted 6 lines

My understanding is that commit 5ce6c1f3535f was based on a draft RVWMO that was different than the current one. I'd love to record this difference in the commit log of Guo Ren's patch, so that later on we know why we changed things back and forth. To do so, the confirmation from RVWMO authors is helpful.

Thx for the effort on the patch and so much related history information which let me clearer.

The motivation of this patch is to save one fence instruction and let .aqrl give the RCsc synchronization point. We also have used the .aqrl in ATOMIC_FETCH_OP:

                "       amo" #asm_op "." #asm_type ".aqrl  %1, %2, %0"  \

I think using .aqrl would be better and union into one style in atomic.h would be clearer.
(Some are .aqrl, some are .rl + fence)

Quoted 15 lines

Hope that I make things more clear ;-)

Regards,
Boqun

Quoted 9 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

author
#16 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

In reply to Dan Lustig
Quoted 112 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

Quoted 8 lines

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

Quoted 10 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

#17 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

	A
	..
	sc.aqrl // M
	..
	B

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

	A ->ppo M ->ppo B

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

also in the herd model:

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

Quoted 18 lines
Quoted 10 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

#18 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 154 lines · Boqun Feng
Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

	A
	..
	sc.aqrl // M
	..
	B

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

	A ->ppo M ->ppo B

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

also in the herd model:

Quoted 8 lines

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

I agree with Boqun's reasoning, at least for the case where there is no branch.

But to confirm, was the original question about also having a branch, I assume to the instruction immediately after the sc? If so, then yes, that would make the .aqrl effect conditional.

Dan

Quoted 19 lines
Quoted 19 lines
Quoted 11 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

author
#19 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 165 lines · Dan Lustig
Quoted 154 lines · Boqun Feng
Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

      A
      ..
      sc.aqrl // M
      ..
      B

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

      A ->ppo M ->ppo B

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

also in the herd model:

Quoted 8 lines

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

Quoted 8 lines

I agree with Boqun's reasoning, at least for the case where there is no branch.

But to confirm, was the original question about also having a branch, I assume to the instruction immediately after the sc? If so, then yes, that would make the .aqrl effect conditional.

Quoted 1 line

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with

current spec?

Quoted 1 line
Quoted 1 line

I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

In ISA spec, I found:
"Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart."
No "lr + bnez + sc.aqrl" or "lr.aq + bnez + sc.aqrl" example description.

Quoted 1 line
Quoted 1 line

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec?

So, the above is legal for the RVWMO & LKMM?

Quoted 22 lines

Dan

Quoted 19 lines
Quoted 19 lines
Quoted 11 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

Signature · 2 lines
Best Regards
 Guo Ren
author
#20 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

In reply to Boqun Feng
Quoted 141 lines · Boqun Feng
Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

        A
        ..
        sc.aqrl // M
        ..
        B
Quoted 4 lines

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

        A ->ppo M ->ppo B

That also means M must fence.rl + sc + fence.aq. But in the release consistency model, "rl + aq" is not legal and has no guarantee at all.

So sc.aqrl should be clarified in spec, but I only found "lr.aq + sc.aqrl" description, see the patch commit log.

Could we treat sc.aqrl as a whole in ISA? Because in micro-arch, we must separate it into pieces for implementation.

That is what the RVWMO should give out.

Quoted 8 lines

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

Quoted 4 lines

also in the herd model:

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

If the herd7 model has defined that, I think it should be legal. Good catch.

Quoted 25 lines

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

Quoted 18 lines
Quoted 10 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

Signature · 2 lines
Best Regards
 Guo Ren
#21 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 145 lines · Guo Ren
Quoted 144 lines · Boqun Feng
Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

        A
        ..
        sc.aqrl // M
        ..
        B

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

Quoted 6 lines
Quoted 1 line
        A ->ppo M ->ppo B

That also means M must fence.rl + sc + fence.aq. But in the release consistency model, "rl + aq" is not legal and has no guarantee at all.

So sc.aqrl should be clarified in spec, but I only found "lr.aq + sc.aqrl" description, see the patch commit log.

The spec doesn't try to enumerate every possible synchronization instruction sequence. That's why the RVWMO rules are in place.

Quoted 4 lines

Could we treat sc.aqrl as a whole in ISA? Because in micro-arch, we must separate it into pieces for implementation.

That is what the RVWMO should give out.

What exactly would you like the spec to say about this? RVWMO and the RISC-V spec in general describe the required architecturally observable behavior. They're not implementation guides.

Generally speaking, I would expect splitting an sc.aqrl into a ".rl; sc; .aq" pattern to be OK. That wouldn't introduce new observable behaviors compared to treating the sc.aqrl as a single indivisible operation, would it?

Dan

Quoted 42 lines
Quoted 11 lines

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

also in the herd model:

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

If the herd7 model has defined that, I think it should be legal. Good catch.

Quoted 25 lines

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

Quoted 18 lines
Quoted 10 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

author
#22 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

Quoted 148 lines · Dan Lustig
Quoted 146 lines · Guo Ren
Quoted 145 lines · Boqun Feng
Quoted 118 lines · Guo Ren
Quoted 117 lines · Dan Lustig
Quoted 102 lines · Boqun Feng

Hi,

On Tue, Jun 14, 2022 at 01:03:47PM +0200, Andrea Parri wrote:
[...]

Quoted 41 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

Quoted 20 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Quoted 8 lines

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

I agree with Andrea.

And I actually took a look into this, and I think I find some explanation. There are two versions of RISV memory model here:

Model 2017: released at Dec 1, 2017 as a draft

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/hKywNHBkAXM/m/QzUtxEWLBQAJ

Model 2018: released at May 2, 2018

https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/xW03vmfmPuA/m/bMPk3UCWAgAJ

Noted that previous conversation about commit 5ce6c1f3535f happened at March 2018. So the timeline is roughly:

      Model 2017 -> commit 5ce6c1f3535f -> Model 2018

And in the email thread of Model 2018, the commit related to model changes also got mentioned:

      https://github.com/riscv/riscv-isa-manual/commit/b875fe417948635ed68b9644ffdf718cb343a81a

in that commit, we can see the changes related to sc.aqrl are:

to have occurred between the LR and a successful SC. The LR/SC sequence can be given acquire semantics by setting the {\em aq} bit on
-the SC instruction. The LR/SC sequence can be given release semantics -by setting the {\em rl} bit on the LR instruction. Setting both {\em
- aq} and {\em rl} bits on the LR instruction, and setting the {\em
- aq} bit on the SC instruction makes the LR/SC sequence sequentially -consistent with respect to other sequentially consistent atomic -operations.
+the LR instruction. The LR/SC sequence can be given release semantics +by setting the {\em rl} bit on the SC instruction. Setting the {\em
+ aq} bit on the LR instruction, and setting both the {\em aq} and the {\em
+ rl} bit on the SC instruction makes the LR/SC sequence sequentially +consistent, meaning that it cannot be reordered with earlier or +later memory operations from the same hart.

note that Model 2018 explicitly says that "ld.aq+sc.aqrl" is ordered against "earlier or later memory operations from the same hart", and this statement was not in Model 2017.

So my understanding of the story is that at some point between March and May 2018, RISV memory model folks decided to add this rule, which does look more consistent with other parts of the model and is useful.

Quoted 7 lines

And this is why (and when) "ld.aq+sc.aqrl" can be used as a fully-ordered barrier ;-)

Now if my understanding is correct, to move forward, it's better that 1) this patch gets resend with the above information (better rewording a bit), and 2) gets an Acked-by from Dan to confirm this is a correct history ;-)

I'm a bit lost as to why digging into RISC-V mailing list history is relevant here...what's relevant is what was ratified in the RVWMO chapter of the RISC-V spec, and whether the code you're proposing is the most optimized code that is correct wrt RVWMO.

Quoted 7 lines
Quoted 3 lines

Is your claim that the code you're proposing to fix was based on a pre-RVWMO RISC-V memory model definition, and you're updating it to be more RVWMO-compliant?

Could "lr + beq + sc.aqrl" provides a conditional RCsc here with current spec? I only found "lr.aq + sc.aqrl" despcriton which is un-conditional RCsc.

/me put the temporary RISCV memory model hat on and pretend to be a RISCV memory expert.

I think the answer is yes, it's actually quite straightforwards given that RISCV treats PPO (Preserved Program Order) as part of GMO (Global Memory Order), considering the following (A and B are memory accesses):

        A
        ..
        sc.aqrl // M
        ..
        B

, A has a ->ppo ordering to M since "sc.aqrl" is a RELEASE, and M has a ->ppo ordeing to B since "sc.aqrl" is an AQUIRE, so

        A ->ppo M ->ppo B
Quoted 8 lines
Quoted 5 lines

That also means M must fence.rl + sc + fence.aq. But in the release consistency model, "rl + aq" is not legal and has no guarantee at all.

So sc.aqrl should be clarified in spec, but I only found "lr.aq + sc.aqrl" description, see the patch commit log.

The spec doesn't try to enumerate every possible synchronization instruction sequence. That's why the RVWMO rules are in place.

Okay, I just want to confirm "lr + sc.aqrl" is correct here.

Quoted 6 lines
Quoted 5 lines

Could we treat sc.aqrl as a whole in ISA? Because in micro-arch, we must separate it into pieces for implementation.

That is what the RVWMO should give out.

Quoted 8 lines

What exactly would you like the spec to say about this? RVWMO and the RISC-V spec in general describe the required architecturally observable behavior. They're not implementation guides.

Generally speaking, I would expect splitting an sc.aqrl into a ".rl; sc; .aq" pattern to be OK. That wouldn't introduce new observable behaviors compared to treating the sc.aqrl as a single indivisible operation, would it?

Yes, I think the below modification is correct, and it could improve the performance in the fast path. Adding .aq annotation during the false loop won't cause side effects. right?

                "0:     lr.d     %[p],  %[c]\n"
                "       beq      %[p],  %[u], 1f\n"
                "       add      %[rc], %[p], %[a]\n"
-               "       sc.d.rl  %[rc], %[rc], %[c]\n"
+               "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
                "       bnez     %[rc], 0b\n"
-               "       fence    rw, rw\n"
Quoted 45 lines

Dan

Quoted 42 lines
Quoted 11 lines

And since RISCV describes that PPO is part of GMO:

"""
The subset of program order that must be respected by the global memory order is known as preserved program order.
"""

also in the herd model:

(* Main model axiom *)
acyclic co | rfe | fr | ppo as Model

If the herd7 model has defined that, I think it should be legal. Good catch.

Quoted 25 lines

, therefore the ordering between A and B is GMO and GMO should be respected by all harts.

Regards,
Boqun

Quoted 18 lines
Quoted 10 lines

Dan

Quoted 7 lines

Regards,
Boqun

Quoted 3 lines

Andrea

[...]

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

--
Best Regards
Guo Ren

author
#23 lore raw

Re: [PATCH V4 5/5] riscv: atomic: Optimize LRSC-pairs atomic ops with .aqrl annotation

In reply to Andrea Parri
Quoted 51 lines · Andrea Parri

Guo,

Quoted 47 lines · Guo Ren
Quoted 46 lines · Palmer Dabbelt
Quoted 33 lines · On Sun, 22 May 2022 06:12:56 PDT (-0700), [email protected] wrote:
Quoted 32 lines · Palmer Dabbelt
Quoted 29 lines · On Wed, 04 May 2022 20:55:26 PDT (-0700), [email protected] wrote:

From: Guo Ren <[email protected]>

The current implementation is the same with 8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for full barrier semantics"). RISC-V could combine acquire and release into the SC instructions and it could reduce a fence instruction to gain better performance. Here is related descriptio from RISC-V ISA 10.2 Load-Reserved/Store-Conditional Instructions:

- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting both the aq and the rl bit on the SC instruction makes the LR/SC sequence sequentially consistent, meaning that it cannot be reordered with earlier or later memory operations from the same hart.

Software should not set the rl bit on an LR instruction unless the aq bit is also set, nor should software set the aq bit on an SC instruction unless the rl bit is also set. LR.rl and SC.aq instructions are not guaranteed to provide any stronger ordering than those with both bits clear, but may result in lower performance.

The only difference is when sc.w/d.aqrl failed, it would cause .aq effect than before. But it's okay for sematic because overlap address LR couldn't beyond relating SC.

Quoted 5 lines
Quoted 3 lines

IIUC that's not accurate, or at least wasn't in 2018. The ISA tends to drift around a bit, so it's possible things have changed since then. 5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences")

Thx for explaining, that why I suspected with the sentence in the comment:
"which do not give full-ordering with .aqrl"

Sorry, I'm not quite sure what you're saying here. My understanding is that this change results in mappings that violate LKMM, based on the rationale in that previous commit. IIUC that all still holds, but I'm not really a memory model person so I frequently miss stuff around there.

Quoted 7 lines
Quoted 3 lines

5ce6c1f3535f ("riscv/atomic: Strengthen implementations with fences") is about fixup wrong spinlock/unlock implementation and not relate to this patch.

No. The commit in question is evidence of the fact that the changes you are presenting here (as an optimization) were buggy/incorrect at the time in which that commit was worked out.

I think I've mixed it with 0123f4d76ca6 ("riscv/spinlock: Strengthen implementations with fences").

Quoted 37 lines
Quoted 22 lines

Actually, sc.w.aqrl is very strong and the same with:
fence rw, rw
sc.w
fence rw,rw

So "which do not give full-ordering with .aqrl" is not writen in RISC-V ISA and we could use sc.w/d.aqrl with LKMM.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

describes the issue more specifically, that's when we added these fences. There have certainly been complains that these fences are too heavyweight for the HW to go fast, but IIUC it's the best option we have

Quoted 8 lines
Quoted 2 lines

Yeah, it would reduce the performance on D1 and our next-generation processor has optimized fence performance a lot.

Definately a bummer that the fences make the HW go slow, but I don't really see any other way to go about this. If you think these mappings are valid for LKMM and RVWMO then we should figure this out, but trying to drop fences to make HW go faster in ways that violate the memory model is going to lead to insanity.

Quoted 4 lines

Actually, this patch is okay with the ISA spec, and Dan also thought it was valid.

ref: https://lore.kernel.org/lkml/[email protected]/raw

"Thoughts" on this regard have _changed_. Please compare that quote with, e.g.

https://lore.kernel.org/linux-riscv/[email protected]/

So here's a suggestion:

Reviewers of your patches have asked: How come that code we used to consider as buggy is now considered "an optimization" (correct)?

Quoted 281 lines

Denying the evidence or going around it is not making their job (and this upstreaming) easier, so why don't you address it? Take time to review previous works and discussions in this area, understand them, and integrate such knowledge in future submissions.

Andrea

Quoted 273 lines

------

Quoted 9 lines

2. Using .aqrl to replace the fence rw, rw is okay to ISA manual, right? And reducing a fence instruction to gain better performance:

                "0:     lr.w     %[p],  %[c]\n"
                 "       sub      %[rc], %[p], %[o]\n"
                 "       bltz     %[rc], 1f\n".
 -               "       sc.w.rl  %[rc], %[rc], %[c]\n"
 +              "       sc.w.aqrl %[rc], %[rc], %[c]\n"
                 "       bnez     %[rc], 0b\n"
 -               "       fence    rw, rw\n"

Yes, using .aqrl is valid.

Dan
------

Quoted 240 lines

I can definately buy the argument that we have mappings of various application memory models that are difficult to make fast given the ISA encodings of RVWMO we have, but that's not really an issue we can fix in the atomic mappings.

Quoted 234 lines
Quoted 9 lines

given the current set of memory model primitives we implement in the ISA (ie, there's more in RVWMO but no way to encode that).

The others all look good, though, and as these are really all independent cleanups I'm going to go ahead and put those three on for-next.

There's also a bunch of checkpatch errors. The ones about "*" seem spurious, but the alignment ones aren't. Here's my fixups:

Thx for the fixup.

Quoted 223 lines
    diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
    index 34f757dfc8f2..0bde499fa8bc 100644
    --- a/arch/riscv/include/asm/atomic.h
    +++ b/arch/riscv/include/asm/atomic.h
    @@ -86,9 +86,9 @@ ATOMIC_OPS(xor, xor,  i)
      * versions, while the logical ops only have fetch versions.
      */
     #define ATOMIC_FETCH_OP(op, asm_op, I, asm_type, c_type, prefix)   \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -98,9 +98,9 @@ c_type arch_atomic##prefix##_fetch_##op##_relaxed(c_type i,               \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_acquire(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -110,9 +110,9 @@ c_type arch_atomic##prefix##_fetch_##op##_acquire(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,                \
    -                                        atomic##prefix##_t *v)     \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op##_release(c_type i,                       \
    +                                      atomic##prefix##_t *v)       \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -122,8 +122,8 @@ c_type arch_atomic##prefix##_fetch_##op##_release(c_type i,             \
                : "memory");                                            \
        return ret;                                                     \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)   \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)  \
     {                                                                  \
        register c_type ret;                                            \
        __asm__ __volatile__ (                                          \
    @@ -135,28 +135,28 @@ c_type arch_atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v)      \
     }

     #define ATOMIC_OP_RETURN(op, asm_op, c_op, I, asm_type, c_type, prefix)    \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_relaxed(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_relaxed(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_relaxed(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_acquire(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_acquire(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_acquire(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return_release(c_type i,               \
    -                                         atomic##prefix##_t *v)    \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return_release(c_type i,                      \
    +                                       atomic##prefix##_t *v)      \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I;    \
    +   return arch_atomic##prefix##_fetch_##op##_release(i, v) c_op I; \
     }                                                                  \
    -static __always_inline                                                     \
    -c_type arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)        \
    +static __always_inline c_type                                              \
    +arch_atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v)       \
     {                                                                  \
    -        return arch_atomic##prefix##_fetch_##op(i, v) c_op I;              \
    +   return arch_atomic##prefix##_fetch_##op(i, v) c_op I;           \
     }

     #ifdef CONFIG_GENERIC_ATOMIC64
Quoted 122 lines
Cc Palmer Dabbelt <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Dan Lustig <[email protected]>
Cc Andrea Parri <[email protected]>
---
 arch/riscv/include/asm/atomic.h  | 24 ++++++++----------------
 arch/riscv/include/asm/cmpxchg.h |  6 ++----
 2 files changed, 10 insertions(+), 20 deletions(-)
arch/riscv/include/asm/atomic.h +8 -16
index 34f757dfc8f2..aef8aa9ac4f4 100644
@@ -269,9 +269,8 @@ static __always_inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int
              "0:     lr.w     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -290,9 +289,8 @@ static __always_inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a,
              "0:     lr.d     %[p],  %[c]\n"
              "       beq      %[p],  %[u], 1f\n"
              "       add      %[rc], %[p], %[a]\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl  %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              : [a]"r" (a), [u]"r" (u)
@@ -382,9 +380,8 @@ static __always_inline bool arch_atomic_inc_unless_negative(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -402,9 +399,8 @@ static __always_inline bool arch_atomic_dec_unless_positive(atomic_t *v)
              "0:     lr.w      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.w.rl   %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -422,9 +418,8 @@ static __always_inline int arch_atomic_dec_if_positive(atomic_t *v)
              "0:     lr.w     %[p],  %[c]\n"
              "       addi     %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.w.rl  %[rc], %[rc], %[c]\n"
+             "       sc.w.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -444,9 +439,8 @@ static __always_inline bool arch_atomic64_inc_unless_negative(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bltz      %[p],  1f\n"
              "       addi      %[rc], %[p], 1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -465,9 +459,8 @@ static __always_inline bool arch_atomic64_dec_unless_positive(atomic64_t *v)
              "0:     lr.d      %[p],  %[c]\n"
              "       bgtz      %[p],  1f\n"
              "       addi      %[rc], %[p], -1\n"
-             "       sc.d.rl   %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez      %[rc], 0b\n"
-             "       fence     rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
@@ -486,9 +479,8 @@ static __always_inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
              "0:     lr.d     %[p],  %[c]\n"
              "       addi      %[rc], %[p], -1\n"
              "       bltz     %[rc], 1f\n"
-             "       sc.d.rl  %[rc], %[rc], %[c]\n"
+             "       sc.d.aqrl %[rc], %[rc], %[c]\n"
              "       bnez     %[rc], 0b\n"
-             "       fence    rw, rw\n"
              "1:\n"
              : [p]"=&r" (prev), [rc]"=&r" (rc), [c]"+A" (v->counter)
              :
arch/riscv/include/asm/cmpxchg.h +1 -2
index 1af8db92250b..9269fceb86e0 100644
@@ -307,9 +307,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.w %0, %2\n"                          \
                      "       bne  %0, %z3, 1f\n"                     \
-                     "       sc.w.rl %1, %z4, %2\n"                  \
+                     "       sc.w.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" ((long)__old), "rJ" (__new)              \
@@ -319,9 +318,8 @@
              __asm__ __volatile__ (                                  \
                      "0:     lr.d %0, %2\n"                          \
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

arch/riscv/include/asm/cmpxchg.h line 325

Quoted 8 lines
arch/riscv/include/asm/cmpxchg.h +1 -2
                      "       bne %0, %z3, 1f\n"                      \
-                     "       sc.d.rl %1, %z4, %2\n"                  \
+                     "       sc.d.aqrl %1, %z4, %2\n"                \
                      "       bnez %1, 0b\n"                          \
-                     "       fence rw, rw\n"                         \
                      "1:\n"                                          \
                      : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)    \
                      : "rJ" (__old), "rJ" (__new)                    \

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/