Skip to contentSkip to conversation

phy: adin: fix broken support for adi,phy-mode-override

PATCH In review Nate Drude 2 participants 2 messages May 6, 2022 – May 8, 2022

Subsystems (3)
lore
Share & tools
lore

Nate Drude

author
#0 lore raw

PATCH 1/1 phy: adin: fix broken support for adi,phy-mode-override

Currently, the adin driver fails to compile.

The original patch introducing the adin driver used the function phy_get_interface_by_name to support the adi,phy-mode-override property. Unfortunately, a few days before the adin patch
was accepted, another patch removed support for phy_get_interface_by_name:

https://github.com/u-boot/u-boot/commit/123ca114e07ecf28aa2538748d733e2b22d8b8b5

This patch refactors adin_get_phy_mode_override, implementing the logic in the new function, ofnode_read_phy_mode, from the patch above.

---
 drivers/net/phy/adin.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/net/phy/adin.c +11 -11
index cff841ab3d..e60f288b9b 100644
@@ -100,27 +100,27 @@ static u32 adin_get_reg_value(struct phy_device *phydev,
  * The function gets phy-mode string from property 'adi,phy-mode-override'
  * and return its index in phy_interface_strings table, or -1 in error case.
  */
-int adin_get_phy_mode_override(struct phy_device *phydev)
+phy_interface_t adin_get_phy_mode_override(struct phy_device *phydev)
 {
 	ofnode node = phy_get_ofnode(phydev);
 	const char *phy_mode_override;
 	const char *prop_phy_mode_override = "adi,phy-mode-override";
-	int override_interface;
+	int i;
 
 	phy_mode_override = ofnode_read_string(node, prop_phy_mode_override);
 	if (!phy_mode_override)
-		return -ENODEV;
+		return PHY_INTERFACE_MODE_NA;
 
 	debug("%s: %s = '%s'\n",
 	      __func__, prop_phy_mode_override, phy_mode_override);
 
-	override_interface = phy_get_interface_by_name(phy_mode_override);
+	for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++)
+		if (!strcmp(phy_mode_override, phy_interface_strings[i]))
+			return (phy_interface_t) i;
 
-	if (override_interface < 0)
-		printf("%s: %s = '%s' is not valid\n",
-		       __func__, prop_phy_mode_override, phy_mode_override);
+	printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode_override);
 
-	return override_interface;
+	return PHY_INTERFACE_MODE_NA;
 }
 
 static u16 adin_ext_read(struct phy_device *phydev, const u32 regnum)
@@ -148,10 +148,10 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
 {
 	u16 reg_val;
 	u32 val;
-	int phy_mode_override = adin_get_phy_mode_override(phydev);
+	phy_interface_t phy_mode_override = adin_get_phy_mode_override(phydev);
 
-	if (phy_mode_override >= 0) {
-		phydev->interface = (phy_interface_t) phy_mode_override;
+	if (phy_mode_override != PHY_INTERFACE_MODE_NA) {
+		phydev->interface = phy_mode_override;
 	}
 
 	reg_val = adin_ext_read(phydev, ADIN1300_GE_RGMII_CFG);
Signature · 1 line
2.25.1
Tested-by on v1 1/1
#1 lore raw

Hi Nate,

That was quick! I have rebased my changes on top of this patch, and can confirm that the adin phy driver compiles, and still works.

I did not test setting adi,[rt]x-internal-delay-ps in dts though.

So, I guess you can add my superficial

[PATCH 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+ patches 2-5 apply cleanly, so I won't immediately roll a v2.

Am 07.05.22 um 00:52 schrieb Nate Drude:

Quoted 61 lines

Currently, the adin driver fails to compile.

The original patch introducing the adin driver used the function phy_get_interface_by_name to support the adi,phy-mode-override property. Unfortunately, a few days before the adin patch
was accepted, another patch removed support for phy_get_interface_by_name:

https://github.com/u-boot/u-boot/commit/123ca114e07ecf28aa2538748d733e2b22d8b8b5

This patch refactors adin_get_phy_mode_override, implementing the logic in the new function, ofnode_read_phy_mode, from the patch above.

---
  drivers/net/phy/adin.c | 22 +++++++++++-----------
  1 file changed, 11 insertions(+), 11 deletions(-)
drivers/net/phy/adin.c +8 -8
index cff841ab3d..e60f288b9b 100644
@@ -100,27 +100,27 @@ static u32 adin_get_reg_value(struct phy_device *phydev,
   * The function gets phy-mode string from property 'adi,phy-mode-override'
   * and return its index in phy_interface_strings table, or -1 in error case.
   */
-int adin_get_phy_mode_override(struct phy_device *phydev)
+phy_interface_t adin_get_phy_mode_override(struct phy_device *phydev)
  {
  	ofnode node = phy_get_ofnode(phydev);
  	const char *phy_mode_override;
  	const char *prop_phy_mode_override = "adi,phy-mode-override";
-	int override_interface;
+	int i;
 
  	phy_mode_override = ofnode_read_string(node, prop_phy_mode_override);
  	if (!phy_mode_override)
-		return -ENODEV;
+		return PHY_INTERFACE_MODE_NA;
 
  	debug("%s: %s = '%s'\n",
  	      __func__, prop_phy_mode_override, phy_mode_override);
 
-	override_interface = phy_get_interface_by_name(phy_mode_override);
+	for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++)
+		if (!strcmp(phy_mode_override, phy_interface_strings[i]))
+			return (phy_interface_t) i;
 
-	if (override_interface < 0)
-		printf("%s: %s = '%s' is not valid\n",
-		       __func__, prop_phy_mode_override, phy_mode_override);
+	printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode_override);
 
-	return override_interface;
+	return PHY_INTERFACE_MODE_NA;
  }
 
  static u16 adin_ext_read(struct phy_device *phydev, const u32 regnum)
@@ -148,10 +148,10 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
  {
  	u16 reg_val;
  	u32 val;

drivers/net/phy/adin.c static int adin_config_rgmii_mode(struct phy_device *phydev) · line 157

Quoted 10 lines
drivers/net/phy/adin.c +3 -3
-	int phy_mode_override = adin_get_phy_mode_override(phydev);
+	phy_interface_t phy_mode_override = adin_get_phy_mode_override(phydev);
 
-	if (phy_mode_override >= 0) {
-		phydev->interface = (phy_interface_t) phy_mode_override;
+	if (phy_mode_override != PHY_INTERFACE_MODE_NA) {
+		phydev->interface = phy_mode_override;
  	}
 
  	reg_val = adin_ext_read(phydev, ADIN1300_GE_RGMII_CFG);

- Josua Mayer