Add device tree for Intel n6000
v4 cover Add device tree for Intel n6000
From: Matthew Gerlach <[email protected]>
This patch set adds a device tree for the Hard Processor System (HPS) on an Agilex based Intel n6000 board.
Patch 1 defines the device tree binding for the HPS Copy Engine IP used to copy a bootable image from host memory to HPS DDR.
Patch 2 defines the binding for the Intel n6000 board itself.
Patch 3 adds the device tree for the n6000 board.
Changelog v3 -> v4:
- move binding yaml from soc to soc/intel
Changelog v2 -> v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag
- added Acked-by
- add unit number to memory node
- remove spi node with unaccepted compatible value
Changelog v1 -> v2:
- add dt binding for copy enging
- add dt binding for n6000 board
- fix copy engine node name
- fix compatible field for copy engine
- remove redundant status field
- add compatibility field for the board
- fix SPDX
- fix how osc1 clock frequency is set
Matthew Gerlach (3):
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: intel: add binding for Intel n6000
arm64: dts: intel: add device tree for n6000
.../bindings/arm/intel,socfpga.yaml | 1 + .../soc/intel/intel,hps-copy-engine.yaml | 51 ++++++++++++++ arch/arm64/boot/dts/intel/Makefile | 3 +- .../boot/dts/intel/socfpga_agilex_n6000.dts | 66 +++++++++++++++++++ 4 files changed, 120 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
Signature · 1 line
2.25.1
PATCH v4 1/3 dt-bindings: soc: add bindings for Intel HPS Copy Engine
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
---
v4:
- move from soc to soc/intel/
v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag
--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +51 -0
@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <[email protected]> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + };
Signature · 1 line
2.25.1
Re: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
Quoted 6 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>
Best regards,
Krzysztof
Re: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
Quoted 10 lines · Krzysztof Kozlowski
Quoted 6 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>
Hi Krzysztof,
Thank you for the review. I will add your tag and submit a v5 patchset.
Matthew
Quoted 5 lines
Best regards,
Krzysztof
Rob Herring
maintainerRe: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
In reply to [email protected]Quoted 58 lines · On Sun, May 08, 2022 at 07:26:22AM -0700, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>---
v4:
- move from soc to soc/intel/v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yamlDocumentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +31
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <[email protected]> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml line 41
Quoted 10 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +10
-0+ +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw";
A simple-bus doesn't have regs because it is simple. If you have registers, then you need a specific compatible. You can have 'simple-bus' as a fallback if the bus is completely setup by firmware and the OS never needs to configure/manage it.
It also looks odd that ranges only has 4K of bus space and the bus registers are 1.5GB of space.
That's all kind of outside of the scope of this binding and you should just drop that part.
Quoted 14 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +10
-0+ #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + };Signature · 1 line
2.25.1
Re: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
Quoted 66 lines · Rob Herring
Quoted 65 lines · On Sun, May 08, 2022 at 07:26:22AM -0700, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>---
v4:
- move from soc to soc/intel/v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yamlDocumentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +38
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <[email protected]> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus";
Quoted 8 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml line 41
Quoted 3 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +3
-0+ reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw";A simple-bus doesn't have regs because it is simple. If you have registers, then you need a specific compatible. You can have 'simple-bus' as a fallback if the bus is completely setup by firmware and the OS never needs to configure/manage it.
The hardware I'm trying to describe above is the connection from the HPS/SOC to the FPGA. There are two ranges of physical addresses with this connection referred to as the "HPS to FPGA bridge" and the "Lightweight HPS to FPGA bridge". Device tree subnodes of bus@80000000 are IP blocks in the FPGA. The IP blocks may be connected to one or both of the physical address ranges. Since these physical address ranges are not registers
of the bus@80000000, the field names, reg and reg-names, are probably wrong. Should the reg field above really be ranges?
Quoted 3 lines
It also looks odd that ranges only has 4K of bus space and the bus registers are 1.5GB of space.
The intent of the ranges field below is to show the ranges of actual registers associated subnodes of bus@80000000. This is probably incorrect as well.
Quoted 3 lines
That's all kind of outside of the scope of this binding and you should just drop that part.
I agree that discussion of bus@80000000 is outside the scope of this binding. I will resubmit this binding with only the dma-controller@0 node as the example.
Quoted 16 lines
Quoted 15 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +10
-1+ #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + }; --2.25.1
Rob Herring
maintainerRe: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
Quoted 79 lines · On Tue, May 10, 2022 at 03:23:23PM -0700, [email protected] wrote:
Quoted 66 lines · Rob Herring
Quoted 65 lines · On Sun, May 08, 2022 at 07:26:22AM -0700, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>---
v4:
- move from soc to soc/intel/v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yamlDocumentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +38
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <[email protected]> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus";Quoted 8 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml line 41
Quoted 3 lines
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file +3
-0+ reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw";A simple-bus doesn't have regs because it is simple. If you have registers, then you need a specific compatible. You can have 'simple-bus' as a fallback if the bus is completely setup by firmware and the OS never needs to configure/manage it.
Quoted 8 lines
The hardware I'm trying to describe above is the connection from the HPS/SOC to the FPGA. There are two ranges of physical addresses with this connection referred to as the "HPS to FPGA bridge" and the "Lightweight HPS to FPGA bridge". Device tree subnodes of bus@80000000 are IP blocks in the FPGA. The IP blocks may be connected to one or both of the physical address ranges. Since these physical address ranges are not registers of the bus@80000000, the field names, reg and reg-names, are probably wrong. Should the reg field above really be ranges?
Yes, sound likes it should be.
Rob
Rob Herring
maintainerRe: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
In reply to [email protected]Quoted 10 lines · On Sun, May 08, 2022 at 07:26:22AM -0700, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>---
v4:
- move from soc to soc/intel/
Quoted 8 lines
v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++
Also, this should go under bindings/dma/
Quoted 2 lines
1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
Re: [PATCH v4 1/3] dt-bindings: soc: add bindings for Intel HPS Copy Engine
Quoted 20 lines · Rob Herring
Quoted 10 lines · On Sun, May 08, 2022 at 07:26:22AM -0700, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add device tree bindings documentation for the Intel Hard Processor System (HPS) Copy Engine.
Signed-off-by Matthew Gerlach <[email protected]>---
v4:
- move from soc to soc/intel/Quoted 8 lines
v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag--- .../soc/intel/intel,hps-copy-engine.yaml | 51 +++++++++++++++++++
Quoted 1 line
Also, this should go under bindings/dma/
I will move .../soc/intel/intel,hps-copy-engine.yaml to .../dma/intel,hps-copy-engine.yaml unless you think I should start a intel subdirectory of bindings/dma.
Quoted 4 lines
Quoted 3 lines
1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
PATCH v4 2/3 dt-bindings: intel: add binding for Intel n6000
In reply to [email protected]From: Matthew Gerlach <[email protected]>
Add the binding string for the Agilex based Intel n6000 board.
---
v3:
- added Acked-by
--- Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +1 -0
@@ -18,6 +18,7 @@ properties: items: - enum: - intel,n5x-socdk + - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex
Signature · 1 line
2.25.1
PATCH v4 3/3 arm64: dts: intel: add device tree for n6000
In reply to [email protected]From: Matthew Gerlach <[email protected]>
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS).
---
v3:
- add unit number to memory node
- remove unused label
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remove spi node with unaccepted compatible value
v2:
- fix copy engine node name
- fix compatible field for copy engine
- remove redundant status field
- add compatibility field for the board
- fix SPDX
- fix how osc1 clock frequency is set
--- arch/arm64/boot/dts/intel/Makefile | 3 +- .../boot/dts/intel/socfpga_agilex_n6000.dts | 66 +++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
arch/arm64/boot/dts/intel/Makefile +2 -1
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \ +dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ + socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ socfpga_n5x_socdk.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH v4 3/3] arm64: dts: intel: add device tree for n6000
Quoted 6 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS).
Signed-off-by Matthew Gerlach <[email protected]>
Best regards,
Krzysztof
Re: [PATCH v4 3/3] arm64: dts: intel: add device tree for n6000
Quoted 10 lines · Krzysztof Kozlowski
Quoted 6 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS).
Signed-off-by Matthew Gerlach <[email protected]>
Hi Kryzysztof,
Thanks for the Acked-by. I will add your tag to a v5 patch set submission.
Matthew
Quoted 5 lines
Best regards,
Krzysztof
Rob Herring
maintainerRe: [PATCH v4 3/3] arm64: dts: intel: add device tree for n6000
Quoted 10 lines · On Tue, May 10, 2022 at 07:17:59AM -0700, [email protected] wrote:
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS).
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Matthew Gerlach <[email protected]>Hi Kryzysztof,
Thanks for the Acked-by. I will add your tag to a v5 patch set submission.
Before I commented, why would there be a v5? TBC, you don't need to resend just to add tags. The tools (b4, PW) do this for us. But when you do send another version you need to add the tags as the tools don't look at prior versions.
Rob
Re: [PATCH v4 3/3] arm64: dts: intel: add device tree for n6000
Quoted 16 lines · Rob Herring
Quoted 15 lines · On Tue, May 10, 2022 at 07:17:59AM -0700, [email protected] wrote:
Quoted 10 lines · Krzysztof Kozlowski
Quoted 6 lines · On 08/05/2022 16:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS).
Signed-off-by Matthew Gerlach <[email protected]>
Quoted 8 lines
Quoted 3 lines
Hi Kryzysztof,
Thanks for the Acked-by. I will add your tag to a v5 patch set submission.
Before I commented, why would there be a v5? TBC, you don't need to resend just to add tags. The tools (b4, PW) do this for us. But when you do send another version you need to add the tags as the tools don't look at prior versions.
Thank you for the clarification.
Matthew
Quoted 3 lines
Rob
Dinh Nguyen
AppliedQuoted 40 lines · On 5/8/22 09:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
This patch set adds a device tree for the Hard Processor System (HPS) on an Agilex based Intel n6000 board.
Patch 1 defines the device tree binding for the HPS Copy Engine IP used to copy a bootable image from host memory to HPS DDR.
Patch 2 defines the binding for the Intel n6000 board itself.
Patch 3 adds the device tree for the n6000 board.
Changelog v3 -> v4:
- move binding yaml from soc to soc/intelChangelog v2 -> v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag
- added Acked-by
- add unit number to memory node
- remove spi node with unaccepted compatible valueChangelog v1 -> v2:
- add dt binding for copy enging
- add dt binding for n6000 board
- fix copy engine node name
- fix compatible field for copy engine
- remove redundant status field
- add compatibility field for the board
- fix SPDX
- fix how osc1 clock frequency is setMatthew Gerlach (3):
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: intel: add binding for Intel n6000
arm64: dts: intel: add device tree for n6000
Quoted 8 lines
.../bindings/arm/intel,socfpga.yaml | 1 + .../soc/intel/intel,hps-copy-engine.yaml | 51 ++++++++++++++ arch/arm64/boot/dts/intel/Makefile | 3 +- .../boot/dts/intel/socfpga_agilex_n6000.dts | 66 +++++++++++++++++++ 4 files changed, 120 insertions(+), 1 deletion(-)create mode 100644
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yamlcreate mode 100644arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
Applied!
Thanks,
Dinh
Quoted 53 lines · Dinh Nguyen
Quoted 40 lines · On 5/8/22 09:26, [email protected] wrote:
From: Matthew Gerlach <[email protected]>
This patch set adds a device tree for the Hard Processor System (HPS) on an Agilex based Intel n6000 board.
Patch 1 defines the device tree binding for the HPS Copy Engine IP used to copy a bootable image from host memory to HPS DDR.
Patch 2 defines the binding for the Intel n6000 board itself.
Patch 3 adds the device tree for the n6000 board.
Changelog v3 -> v4:
- move binding yaml from soc to soc/intelChangelog v2 -> v3:
- remove unused label
- move from misc to soc
- remove 0x from #address-cells/#size-cells values
- change hps_cp_eng@0 to dma-controller@0
- remote inaccurate 'items:' tag
- added Acked-by
- add unit number to memory node
- remove spi node with unaccepted compatible valueChangelog v1 -> v2:
- add dt binding for copy enging
- add dt binding for n6000 board
- fix copy engine node name
- fix compatible field for copy engine
- remove redundant status field
- add compatibility field for the board
- fix SPDX
- fix how osc1 clock frequency is setMatthew Gerlach (3):
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: intel: add binding for Intel n6000
arm64: dts: intel: add device tree for n6000Quoted 9 lines
.../bindings/arm/intel,socfpga.yaml | 1 + .../soc/intel/intel,hps-copy-engine.yaml | 51 ++++++++++++++ arch/arm64/boot/dts/intel/Makefile | 3 +- .../boot/dts/intel/socfpga_agilex_n6000.dts | 66 +++++++++++++++++++ 4 files changed, 120 insertions(+), 1 deletion(-)create mode 100644
Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
create mode 100644arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
Quoted 1 line
Applied!
Hi Dinh,
Rob Herring suggested I move Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml to Documentation/devicetree/bindings/dma/intel,hps-copy-engine.yaml as well as some cleanup to the yaml. Rob also had some concerns about the h2f(lw) bus that I was considering some changes. Should I send a v6 patch set or a new patchset on top of the v4 to address Rob's concerns, or do you have some other suggestion?
Thanks,
Matthew
Quoted 4 lines
Thanks,
Dinh