Skip to contentSkip to conversation

hwmon: (f71882fg) Fix negative temperature

PATCH New Sasha Levin 1 participant 4 messages May 10, 2022

Subsystems (2)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/4 hwmon: (f71882fg) Fix negative temperature

From: "Ji-Ze Hong (Peter Hong)" <[email protected]>

[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]

All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement.

In show_temp()

	temp = data->temp[nr] * 1000;

When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to:

	temp = ((s8)data->temp[nr]) * 1000;
---
 drivers/hwmon/f71882fg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/hwmon/f71882fg.c +3 -2
index cb28e4b4fb10..b87ca56fb774 100644
@@ -1590,8 +1590,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 		temp *= 125;
 		if (sign)
 			temp -= 128000;
-	} else
-		temp = data->temp[nr] * 1000;
+	} else {
+		temp = ((s8)data->temp[nr]) * 1000;
+	}
 
 	return sprintf(buf, "%d\n", temp);
 }
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/4 ASoC: max98090: Reject invalid values in custom control put()

From: Mark Brown <[email protected]>

[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written.

---
 sound/soc/codecs/max98090.c | 3 +++
 1 file changed, 3 insertions(+)
sound/soc/codecs/max98090.c +3 -0
index e7aef841f87d..4aefb13900c2 100644
@@ -419,6 +419,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 
 	val = (val >> mc->shift) & mask;
 
+	if (sel < 0 || sel > mc->max)
+		return -EINVAL;
+
 	*select = sel;
 
 	/* Setting a volume is only valid if it is already On */
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/4 ASoC: max98090: Generate notifications on changes for custom control

In reply to Sasha Levin

From: Mark Brown <[email protected]>

[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that.

---
 sound/soc/codecs/max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/max98090.c +1 -1
index 4aefb13900c2..1a55f6aecdfe 100644
@@ -436,7 +436,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 		mask << mc->shift,
 		sel << mc->shift);
 
-	return 0;
+	return *select != val;
 }
 
 static const char *max98090_perf_pwr_text[] =
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/4 ASoC: ops: Validate input values in snd_soc_put_volsw_range()

In reply to Sasha Levin

From: Mark Brown <[email protected]>

[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware.

---
 sound/soc/soc-ops.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
sound/soc/soc-ops.c +17 -1
index 74968ddee49f..90ba5521c189 100644
@@ -528,7 +528,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int err, ret;
+	int err, ret, tmp;
+
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp < 0)
+		return -EINVAL;
+	if (mc->platform_max && tmp > mc->platform_max)
+		return -EINVAL;
+	if (tmp > mc->max - mc->min + 1)
+		return -EINVAL;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -543,6 +551,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		tmp = ucontrol->value.integer.value[1];
+		if (tmp < 0)
+			return -EINVAL;
+		if (mc->platform_max && tmp > mc->platform_max)
+			return -EINVAL;
+		if (tmp > mc->max - mc->min + 1)
+			return -EINVAL;
+
 		if (invert)
 			val = (max - ucontrol->value.integer.value[1]) & mask;
 		else
Signature · 1 line
2.35.1