Add support for Sercomm partitions

index 01430973ecec..65ff22364fb3 100644
@@ -1082,6 +1082,8 @@ patternProperties:
     description: Sensirion AG
   "^sensortek,.*":
     description: Sensortek Technology Corporation
+  "^sercomm,.*":
+    description: Sercomm (Suzhou) Corporation
   "^sff,.*":
     description: Small Form Factor Committee
   "^sgd,.*":

index ea4cace6a955..ad3ccd250802 100644
@@ -19,7 +19,11 @@ maintainers:
 
 properties:
   compatible:
-    const: fixed-partitions
+    oneOf:
+      - const: fixed-partitions
+      - items:
+          - const: sercomm,sc-partitions
+          - const: fixed-partitions
 
   "#address-cells": true
 

@@ -27,7 +31,24 @@ properties:
 
 patternProperties:
   "@[0-9a-f]+$":
-    $ref: "partition.yaml#"
+    allOf:
+      - $ref: "partition.yaml#"
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: sercomm,sc-partitions
+        then:
+          properties:
+            sercomm,scpart-id:
+              description: Partition id in Sercomm partition map. Mtd
+                parser uses this id to find a record in the partition map
+                containing offset and size of the current partition. The
+                values from partition map overrides partition offset and
+                size defined in reg property of the dts. Frequently these
+                values are the same, but may differ if device has bad
+                eraseblocks on a flash.
+              $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - "#address-cells"

@@ -52,6 +73,7 @@ examples:
             reg = <0x0100000 0x200000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";

@@ -64,6 +86,7 @@ examples:
             reg = <0x00000000 0x1 0x00000000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";

@@ -82,6 +105,7 @@ examples:
             reg = <0x2 0x00000000 0x1 0x00000000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";

@@ -119,3 +143,30 @@ examples:
             };
         };
     };
+
+  - |
+    partitions {
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            sercomm,scpart-id = <0>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            sercomm,scpart-id = <1>;
+        };
+
+        partition@200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            sercomm,scpart-id = <2>;
+            read-only;
+        };
+    };

index 23763d16e4f9..851f4670d89b 100644
@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
 	help
 	  This provides support for parsing partitions from Shared Memory (SMEM)
 	  for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+	tristate "Sercomm partition table parser"
+	depends on MTD
+	help
+	  This provides partitions table parser for devices with Sercomm
+	  partition map. This partition table contains real partition
+	  offsets, which may differ from device to device depending on the
+	  number and location of bad blocks on NAND.

index 2e98aa048278..2fcf0ab9e7da 100644
@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
 obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
 obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
+obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
 obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
 obj-$(CONFIG_MTD_QCOMSMEM_PARTS)	+= qcomsmempart.o