sfc: fix mtd memleak and simplify list handling
Subsystems (3)
cover sfc: fix mtd memleak and simplify list handling
These patches fix a memleak described in the first one and simplify the mtd list handling to make more clear how it works and avoid similar problems in the future.
Íñigo Huguet (2):
sfc: fix memory leak on mtd_probe
sfc: simplify mtd partitions list handling
drivers/net/ethernet/sfc/ef10.c | 17 +++++++++-- drivers/net/ethernet/sfc/efx.h | 4 +-- drivers/net/ethernet/sfc/efx_common.c | 3 -- drivers/net/ethernet/sfc/mtd.c | 42 ++++++++++---------------- drivers/net/ethernet/sfc/net_driver.h | 9 ++++-- drivers/net/ethernet/sfc/siena/siena.c | 5 +++ 6 files changed, 43 insertions(+), 37 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/2 sfc: fix memory leak on mtd_probe
In some cases there is no mtd partitions that can be probed, so the mtd partitions list stays empty. This happens, for example, in SFC9220 devices on the second port of the NIC.
The memory for the mtd partitions is deallocated in efx_mtd_remove, recovering the address of the first element of efx->mtd_list and then deallocating it. But if the list is empty, the address passed to kfree doesn't point to the memory allocated for the mtd partitions, but to the list head itself. Despite this hasn't caused other problems other than the memory leak, this is obviously incorrect.
This patch deallocates the memory during mtd_probe in the case that there are no probed partitions, avoiding the leak.
This was detected with kmemleak, output example:
unreferenced object 0xffff88819cfa0000 (size 46560):
comm "kworker/0:2", pid 48435, jiffies 4364987018 (age 45.924s) hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000000f8e92d9>] kmalloc_order_trace+0x19/0x130
[<0000000042a03844>] efx_ef10_mtd_probe+0x12d/0x320 [sfc]
[<000000004555654f>] efx_pci_probe.cold+0x4e1/0x6db [sfc]
[<00000000b03d5126>] local_pci_probe+0xde/0x170
[<00000000376cc8d9>] work_for_cpu_fn+0x51/0xa0
[<00000000141f8de9>] process_one_work+0x8cb/0x1590
[<00000000cb2d8065>] worker_thread+0x707/0x1010
[<000000001ef4b9f6>] kthread+0x364/0x420
[<0000000014767137>] ret_from_fork+0x22/0x30--- drivers/net/ethernet/sfc/ef10.c | 5 +++++ drivers/net/ethernet/sfc/siena/siena.c | 5 +++++ 2 files changed, 10 insertions(+)
drivers/net/ethernet/sfc/ef10.c +5 -0
@@ -3579,6 +3579,11 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx) n_parts++; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); fail:if (rc)
drivers/net/ethernet/sfc/siena/siena.c +5 -0
@@ -943,6 +943,11 @@ static int siena_mtd_probe(struct efx_nic *efx) nvram_types >>=1 ; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =siena_mtd_get_fw_subtypes (efx, parts, n_parts);if (rc) goto fail;
Signature · 1 line
2.34.1
Re: [PATCH net-next 1/2] sfc: fix memory leak on mtd_probe
The same patch was submitted earlier, see
https://lore.kernel.org/netdev/[email protected]/
Martin
Quoted 73 lines · Íñigo Huguet
In some cases there is no mtd partitions that can be probed, so the mtd partitions list stays empty. This happens, for example, in SFC9220 devices on the second port of the NIC.
The memory for the mtd partitions is deallocated in
efx_mtd_remove, recovering the address of the first element ofefx->mtd_listand then deallocating it. But if the list is empty, the address passed to kfree doesn't point to the memory allocated for the mtd partitions, but to the list head itself. Despite this hasn't caused other problems other than the memory leak, this is obviously incorrect.This patch deallocates the memory during
mtd_probein the case that there are no probed partitions, avoiding the leak.This was detected with kmemleak, output example:
unreferenced object0xffff88819cfa0000(size 46560):
comm "kworker/0:2", pid 48435, jiffies 4364987018 (age 45.924s) hex dump (first 32 bytes):00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000f8e92d9>] kmalloc_order_trace+0x19/0x130 [<0000000042a03844>] efx_ef10_mtd_probe+0x12d/0x320 [sfc] [<000000004555654f>] efx_pci_probe.cold+0x4e1/0x6db [sfc] [<00000000b03d5126>] local_pci_probe+0xde/0x170 [<00000000376cc8d9>] work_for_cpu_fn+0x51/0xa0 [<00000000141f8de9>] process_one_work+0x8cb/0x1590 [<00000000cb2d8065>] worker_thread+0x707/0x1010 [<000000001ef4b9f6>] kthread+0x364/0x420 [<0000000014767137>] ret_from_fork+0x22/0x30Fixes 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")Reported-by Liang Li <[email protected]>Signed-off-by Íñigo Huguet <[email protected]>--- drivers/net/ethernet/sfc/ef10.c | 5 +++++ drivers/net/ethernet/sfc/siena/siena.c | 5 +++++ 2 files changed, 10 insertions(+)drivers/net/ethernet/sfc/ef10.c +5
-0@@ -3579,6 +3579,11 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx) n_parts++; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); fail:if (rc)drivers/net/ethernet/sfc/siena/siena.c +5
-0@@ -943,6 +943,11 @@ static int siena_mtd_probe(struct efx_nic *efx) nvram_types >>=1 ; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =siena_mtd_get_fw_subtypes (efx, parts, n_parts);if (rc) goto fail;Signature · 1 line
2.34.1
Re: [PATCH net-next 1/2] sfc: fix memory leak on mtd_probe
Quoted 3 lines · Martin Habets
The same patch was submitted earlier, see
https://lore.kernel.org/netdev/[email protected]/
Seriously? It has been there for 9 years and 2 persons find it and send the fix with hours of difference? Is someone spying me?
Please review the other one and if it's OK, I will send it alone.
Quoted 78 lines
Martin
Quoted 73 lines · Íñigo Huguet
In some cases there is no mtd partitions that can be probed, so the mtd partitions list stays empty. This happens, for example, in SFC9220 devices on the second port of the NIC.
The memory for the mtd partitions is deallocated in
efx_mtd_remove, recovering the address of the first element ofefx->mtd_listand then deallocating it. But if the list is empty, the address passed to kfree doesn't point to the memory allocated for the mtd partitions, but to the list head itself. Despite this hasn't caused other problems other than the memory leak, this is obviously incorrect.This patch deallocates the memory during
mtd_probein the case that there are no probed partitions, avoiding the leak.This was detected with kmemleak, output example:
unreferenced object0xffff88819cfa0000(size 46560):
comm "kworker/0:2", pid 48435, jiffies 4364987018 (age 45.924s) hex dump (first 32 bytes):00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000f8e92d9>] kmalloc_order_trace+0x19/0x130 [<0000000042a03844>] efx_ef10_mtd_probe+0x12d/0x320 [sfc] [<000000004555654f>] efx_pci_probe.cold+0x4e1/0x6db [sfc] [<00000000b03d5126>] local_pci_probe+0xde/0x170 [<00000000376cc8d9>] work_for_cpu_fn+0x51/0xa0 [<00000000141f8de9>] process_one_work+0x8cb/0x1590 [<00000000cb2d8065>] worker_thread+0x707/0x1010 [<000000001ef4b9f6>] kthread+0x364/0x420 [<0000000014767137>] ret_from_fork+0x22/0x30Fixes 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")Reported-by Liang Li <[email protected]>Signed-off-by Íñigo Huguet <[email protected]>--- drivers/net/ethernet/sfc/ef10.c | 5 +++++ drivers/net/ethernet/sfc/siena/siena.c | 5 +++++ 2 files changed, 10 insertions(+)drivers/net/ethernet/sfc/ef10.c +5
-0@@ -3579,6 +3579,11 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx) n_parts++; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); fail:if (rc)drivers/net/ethernet/sfc/siena/siena.c +5
-1@@ -943,6 +943,11 @@ static int siena_mtd_probe(struct efx_nic *efx) nvram_types >>=1 ; } +if (n_parts ==0 ) { +kfree (parts); +return 0 ; + } + rc =siena_mtd_get_fw_subtypes (efx, parts, n_parts);if (rc) goto fail; --2.34.1
Signature · 1 line
Íñigo Huguet
PATCH 2/2 sfc: simplify mtd partitions list handling
In reply to Íñigo Huguetefx_mtd_partitions are embedded inside efx_mcdi_mtd_partition structs. They contain a list entry that is appended to efx->mtd_list, which is traversed to perform add/remove/rename/etc operations over all efx_mtd_partitions.
However, almost all operations done on a efx_mtd_partition asume that it is actually embedded inside an efx_mcdi_mtd_partition, and the deallocation asume that the first member of the list is located at the beginning of the allocated memory.
Given all that asumptions, the possibility of having an efx_mtd_partition not embedded in an efx_mcdi_efx_partition doesn't exist. Neither it does the possibility of being in a memory position other the one allocated for the efx_mcdi_mtd_partition array. Also, they never need to be reordered.
Given all that, it is better to get rid of the list and use directly the efx_mcdi_mtd_partition array. This shows more clearly how they lay in memory, list traversal is more obvious and it save a small amount of memory on the list nodes.
--- drivers/net/ethernet/sfc/ef10.c | 12 ++++++-- drivers/net/ethernet/sfc/efx.h | 4 +-- drivers/net/ethernet/sfc/efx_common.c | 3 -- drivers/net/ethernet/sfc/mtd.c | 42 ++++++++++----------------- drivers/net/ethernet/sfc/net_driver.h | 9 ++++-- 5 files changed, 33 insertions(+), 37 deletions(-)
drivers/net/ethernet/sfc/ef10.c +9 -3
@@ -3584,10 +3584,16 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)return 0 ; } - rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); -fail: + rc =efx_mtd_add (efx, parts, n_parts);if (rc) -kfree (parts); + goto fail; + efx->mcdi_mtd_parts = parts; + efx->n_mcdi_mtd_parts = n_parts; + +return 0 ; + +fail: +kfree (parts);return rc; }
drivers/net/ethernet/sfc/efx.h +2 -2
@@ -181,8 +181,8 @@ void efx_update_sw_stats(struct efx_nic *efx, u64 *stats);/* MTD */ #ifdef CONFIG_SFC_MTD -int efx_mtd_add (struct efx_nic *efx,struct efx_mtd_partition *parts, -size_t n_parts,size_t sizeof_part); +int efx_mtd_add (struct efx_nic *efx,struct efx_mcdi_mtd_partition *parts, +size_t n_parts);static inline int efx_mtd_probe (struct efx_nic *efx) {return efx->type->mtd_probe (efx);
drivers/net/ethernet/sfc/efx_common.c +0 -3
@@ -987,9 +987,6 @@ int efx_init_struct(struct efx_nic *efx,INIT_LIST_HEAD (&efx->node);INIT_LIST_HEAD (&efx->secondary_list);spin_lock_init (&efx->biu_lock); -#ifdef CONFIG_SFC_MTD -INIT_LIST_HEAD (&efx->mtd_list); -#endif INIT_WORK (&efx->reset_work, efx_reset_work);INIT_DELAYED_WORK (&efx->monitor_work, efx_monitor);efx_selftest_async_init (efx);
drivers/net/ethernet/sfc/mtd.c +16 -26
87 lines not on this page · raw message
drivers/net/ethernet/sfc/net_driver.h +6 -3
@@ -107,6 +107,8 @@ struct hwtstamp_config;struct efx_self_tests ; +struct efx_mcdi_mtd_partition ; +/** * struct efx_buffer - A general-purpose DMA buffer * @addr: host base address of the buffer
@@ -865,7 +867,8 @@ enum efx_xdp_tx_queues_mode {* @irq_zero_count: Number of legacy IRQs seen with queue flags == 0 * @irq_level: IRQ level/index for IRQs not triggered by an event queue * @selftest_work: Work item for asynchronous self-test -* @mtd_list: List of MTDs attached to the NIC +* @mcdi_mtd_parts: Array of MTDs attached to the NIC +* @n_mcdi_mtd_parts: Number of MTDs attached to the NIC * @nic_data: Hardware dependent state * @mcdi: Management-Controller-to-Driver Interface state * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
@@ -1033,7 +1036,8 @@ struct efx_nic {struct delayed_work selftest_work;#ifdef CONFIG_SFC_MTD -struct list_head mtd_list; +struct efx_mcdi_mtd_partition *mcdi_mtd_parts; +unsigned int n_mcdi_mtd_parts;#endif void *nic_data;
@@ -1134,7 +1138,6 @@ static inline unsigned int efx_port_num(struct efx_nic *efx) }struct efx_mtd_partition { -struct list_head node;struct mtd_info mtd;const char *dev_type_name;const char *type_name;
Signature · 1 line
2.34.1
Re: [PATCH net-next 2/2] sfc: simplify mtd partitions list handling
Quoted 16 lines · Íñigo Huguet
efx_mtd_partitionsare embedded insideefx_mcdi_mtd_partitionstructs. They contain a list entry that is appended toefx->mtd_list, which is traversed to perform add/remove/rename/etc operations over allefx_mtd_partitions.However, almost all operations done on a
efx_mtd_partitionasume that it is actually embedded inside anefx_mcdi_mtd_partition, and the deallocation asume that the first member of the list is located at the beginning of the allocated memory.Given all that asumptions, the possibility of having an
efx_mtd_partitionnot embedded in anefx_mcdi_efx_partitiondoesn't exist. Neither it does the possibility of being in a memory position other the one allocated for theefx_mcdi_mtd_partitionarray. Also, they never need to be reordered.
Quoted 4 lines
Given all that, it is better to get rid of the list and use directly the
efx_mcdi_mtd_partitionarray. This shows more clearly how they lay in memory, list traversal is more obvious and it save a small amount of memory on the list nodes.
I like this. Just 1 comment below.
Quoted 132 lines
Signed-off-by Íñigo Huguet <[email protected]>--- drivers/net/ethernet/sfc/ef10.c | 12 ++++++-- drivers/net/ethernet/sfc/efx.h | 4 +-- drivers/net/ethernet/sfc/efx_common.c | 3 -- drivers/net/ethernet/sfc/mtd.c | 42 ++++++++++----------------- drivers/net/ethernet/sfc/net_driver.h | 9 ++++-- 5 files changed, 33 insertions(+), 37 deletions(-)drivers/net/ethernet/sfc/ef10.c +9
-3@@ -3584,10 +3584,16 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)return 0 ; } - rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); -fail: + rc =efx_mtd_add (efx, parts, n_parts);if (rc) -kfree (parts); + goto fail; + efx->mcdi_mtd_parts = parts; + efx->n_mcdi_mtd_parts = n_parts; + +return 0 ; + +fail: +kfree (parts);return rc; }drivers/net/ethernet/sfc/efx.h +2
-2@@ -181,8 +181,8 @@ void efx_update_sw_stats(struct efx_nic *efx, u64 *stats);/* MTD */ #ifdef CONFIG_SFC_MTD -int efx_mtd_add (struct efx_nic *efx,struct efx_mtd_partition *parts, -size_t n_parts,size_t sizeof_part); +int efx_mtd_add (struct efx_nic *efx,struct efx_mcdi_mtd_partition *parts, +size_t n_parts);static inline int efx_mtd_probe (struct efx_nic *efx) {return efx->type->mtd_probe (efx);drivers/net/ethernet/sfc/efx_common.c +0
-3@@ -987,9 +987,6 @@ int efx_init_struct(struct efx_nic *efx,INIT_LIST_HEAD (&efx->node);INIT_LIST_HEAD (&efx->secondary_list);spin_lock_init (&efx->biu_lock); -#ifdef CONFIG_SFC_MTD -INIT_LIST_HEAD (&efx->mtd_list); -#endif INIT_WORK (&efx->reset_work, efx_reset_work);INIT_DELAYED_WORK (&efx->monitor_work, efx_monitor);efx_selftest_async_init (efx);drivers/net/ethernet/sfc/mtd.c +8
-19@@ -12,6 +12,7 @@#include "net_driver.h" #include "efx.h" +#include "mcdi.h" #define to_efx_mtd_partition (mtd) \ container_of(mtd, struct efx_mtd_partition, mtd)@@ -48,18 +49,16 @@ static void efx_mtd_remove_partition(struct efx_mtd_partition *part)ssleep (1 ); }WARN_ON (rc); -list_del (&part->node); } -int efx_mtd_add (struct efx_nic *efx,struct efx_mtd_partition *parts, -size_t n_parts,size_t sizeof_part) +int efx_mtd_add (struct efx_nic *efx,struct efx_mcdi_mtd_partition *parts, +size_t n_parts) {struct efx_mtd_partition *part;size_t i;for (i =0 ; i < n_parts; i++) { - part = (struct efx_mtd_partition *)((char *)parts + - i * sizeof_part); + part = &parts[i].common; part->mtd.writesize =1 ;@@ -78,47 +77,38 @@ int efx_mtd_add(struct efx_nic *efx, struct efx_mtd_partition *parts,if (mtd_device_register (&part->mtd,NULL ,0 )) goto fail; - -/* Add to list in order - efx_mtd_remove() depends on this */ -list_add_tail (&part->node, &efx->mtd_list); }return 0 ; fail: -while (i--) { - part = (struct efx_mtd_partition *)((char *)parts + - i * sizeof_part); -efx_mtd_remove_partition (part); - } +while (i--) +efx_mtd_remove_partition (&parts[i].common); +/* Failure is unlikely here, but probably means we're out of memory */ return -ENOMEM ; }void efx_mtd_remove (struct efx_nic *efx) { -struct efx_mtd_partition *parts, *part, *next; +int i;WARN_ON (efx_dev_registered (efx)); -if (list_empty (&efx->mtd_list)) -return ; - - parts = list_first_entry(&efx->mtd_list, struct efx_mtd_partition, - node);
drivers/net/ethernet/sfc/mtd.c int efx_mtd_add(struct efx_nic *efx, struct efx_mtd_partition *parts, · line 103
Quoted 10 lines
drivers/net/ethernet/sfc/mtd.c +5
-4+for (i =0 ; i < efx->n_mcdi_mtd_parts; i++) +efx_mtd_remove_partition (&efx->mcdi_mtd_parts[i].common); -list_for_each_entry_safe (part, next, &efx->mtd_list, node) -efx_mtd_remove_partition (part); - -kfree (parts); +kfree (efx->mcdi_mtd_parts); + efx->mcdi_mtd_parts =NULL ; + efx->n_mcdi_mtd_parts =0 ;
It is safer to first set to NULL/0 before freeing the memory. With this sequence bad things can happen if the thread gets descheduled right after the kfree.
Martin
Quoted 57 lines
drivers/net/ethernet/sfc/mtd.c +3
-3}void efx_mtd_rename (struct efx_nic *efx) { -struct efx_mtd_partition *part; +int i;ASSERT_RTNL (); -list_for_each_entry (part, &efx->mtd_list, node) - efx->type->mtd_rename (part); +for (i =0 ; i < efx->n_mcdi_mtd_parts; i++) + efx->type->mtd_rename (&efx->mcdi_mtd_parts[i].common); }drivers/net/ethernet/sfc/net_driver.h +6
-3@@ -107,6 +107,8 @@ struct hwtstamp_config;struct efx_self_tests ; +struct efx_mcdi_mtd_partition ; +/** * struct efx_buffer - A general-purpose DMA buffer * @addr: host base address of the buffer @@ -865,7 +867,8 @@ enum efx_xdp_tx_queues_mode {* @irq_zero_count: Number of legacy IRQs seen with queue flags == 0 * @irq_level: IRQ level/index for IRQs not triggered by an event queue * @selftest_work: Work item for asynchronous self-test -* @mtd_list: List of MTDs attached to the NIC +* @mcdi_mtd_parts: Array of MTDs attached to the NIC +* @n_mcdi_mtd_parts: Number of MTDs attached to the NIC * @nic_data: Hardware dependent state * @mcdi: Management-Controller-to-Driver Interface state * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, @@ -1033,7 +1036,8 @@ struct efx_nic {struct delayed_work selftest_work;#ifdef CONFIG_SFC_MTD -struct list_head mtd_list; +struct efx_mcdi_mtd_partition *mcdi_mtd_parts; +unsigned int n_mcdi_mtd_parts;#endif void *nic_data;@@ -1134,7 +1138,6 @@ static inline unsigned int efx_port_num(struct efx_nic *efx) }struct efx_mtd_partition { -struct list_head node;struct mtd_info mtd;const char *dev_type_name;const char *type_name;Signature · 1 line
2.34.1
Re: [PATCH net-next 2/2] sfc: simplify mtd partitions list handling
Quoted 18 lines · Martin Habets
Quoted 16 lines · Íñigo Huguet
efx_mtd_partitionsare embedded insideefx_mcdi_mtd_partitionstructs. They contain a list entry that is appended toefx->mtd_list, which is traversed to perform add/remove/rename/etc operations over allefx_mtd_partitions.However, almost all operations done on a
efx_mtd_partitionasume that it is actually embedded inside anefx_mcdi_mtd_partition, and the deallocation asume that the first member of the list is located at the beginning of the allocated memory.Given all that asumptions, the possibility of having an
efx_mtd_partitionnot embedded in anefx_mcdi_efx_partitiondoesn't exist. Neither it does the possibility of being in a memory position other the one allocated for theefx_mcdi_mtd_partitionarray. Also, they never need to be reordered.
Quoted 6 lines
Quoted 4 lines
Given all that, it is better to get rid of the list and use directly the
efx_mcdi_mtd_partitionarray. This shows more clearly how they lay in memory, list traversal is more obvious and it save a small amount of memory on the list nodes.I like this. Just 1 comment below.
I will prepare a new version, dropping the previous patch
Quoted 136 lines
Quoted 136 lines
Signed-off-by Íñigo Huguet <[email protected]>--- drivers/net/ethernet/sfc/ef10.c | 12 ++++++-- drivers/net/ethernet/sfc/efx.h | 4 +-- drivers/net/ethernet/sfc/efx_common.c | 3 -- drivers/net/ethernet/sfc/mtd.c | 42 ++++++++++----------------- drivers/net/ethernet/sfc/net_driver.h | 9 ++++-- 5 files changed, 33 insertions(+), 37 deletions(-)drivers/net/ethernet/sfc/ef10.c +9
-3@@ -3584,10 +3584,16 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)return 0 ; } - rc =efx_mtd_add (efx, &parts[0 ].common, n_parts,sizeof (*parts)); -fail: + rc =efx_mtd_add (efx, parts, n_parts);if (rc) -kfree (parts); + goto fail; + efx->mcdi_mtd_parts = parts; + efx->n_mcdi_mtd_parts = n_parts; + +return 0 ; + +fail: +kfree (parts);return rc; }drivers/net/ethernet/sfc/efx.h +2
-2@@ -181,8 +181,8 @@ void efx_update_sw_stats(struct efx_nic *efx, u64 *stats);/* MTD */ #ifdef CONFIG_SFC_MTD -int efx_mtd_add (struct efx_nic *efx,struct efx_mtd_partition *parts, -size_t n_parts,size_t sizeof_part); +int efx_mtd_add (struct efx_nic *efx,struct efx_mcdi_mtd_partition *parts, +size_t n_parts);static inline int efx_mtd_probe (struct efx_nic *efx) {return efx->type->mtd_probe (efx);drivers/net/ethernet/sfc/efx_common.c +0
-3@@ -987,9 +987,6 @@ int efx_init_struct(struct efx_nic *efx,INIT_LIST_HEAD (&efx->node);INIT_LIST_HEAD (&efx->secondary_list);spin_lock_init (&efx->biu_lock); -#ifdef CONFIG_SFC_MTD -INIT_LIST_HEAD (&efx->mtd_list); -#endif INIT_WORK (&efx->reset_work, efx_reset_work);INIT_DELAYED_WORK (&efx->monitor_work, efx_monitor);efx_selftest_async_init (efx);drivers/net/ethernet/sfc/mtd.c +10
-19@@ -12,6 +12,7 @@#include "net_driver.h" #include "efx.h" +#include "mcdi.h" #define to_efx_mtd_partition (mtd) \ container_of(mtd, struct efx_mtd_partition, mtd)@@ -48,18 +49,16 @@ static void efx_mtd_remove_partition(struct efx_mtd_partition *part)ssleep (1 ); }WARN_ON (rc); -list_del (&part->node); } -int efx_mtd_add (struct efx_nic *efx,struct efx_mtd_partition *parts, -size_t n_parts,size_t sizeof_part) +int efx_mtd_add (struct efx_nic *efx,struct efx_mcdi_mtd_partition *parts, +size_t n_parts) {struct efx_mtd_partition *part;size_t i;for (i =0 ; i < n_parts; i++) { - part = (struct efx_mtd_partition *)((char *)parts + - i * sizeof_part); + part = &parts[i].common; part->mtd.writesize =1 ;@@ -78,47 +77,38 @@ int efx_mtd_add(struct efx_nic *efx, struct efx_mtd_partition *parts,if (mtd_device_register (&part->mtd,NULL ,0 )) goto fail; - -/* Add to list in order - efx_mtd_remove() depends on this */ -list_add_tail (&part->node, &efx->mtd_list); }return 0 ; fail: -while (i--) { - part = (struct efx_mtd_partition *)((char *)parts + - i * sizeof_part); -efx_mtd_remove_partition (part); - } +while (i--) +efx_mtd_remove_partition (&parts[i].common); +/* Failure is unlikely here, but probably means we're out of memory */ return -ENOMEM ; }void efx_mtd_remove (struct efx_nic *efx) { -struct efx_mtd_partition *parts, *part, *next; +int i;WARN_ON (efx_dev_registered (efx)); -if (list_empty (&efx->mtd_list)) -return ; - - parts = list_first_entry(&efx->mtd_list, struct efx_mtd_partition, - node); +for (i =0 ; i < efx->n_mcdi_mtd_parts; i++) +efx_mtd_remove_partition (&efx->mcdi_mtd_parts[i].common);
Quoted 11 lines
drivers/net/ethernet/sfc/mtd.c int efx_mtd_add(struct efx_nic *efx, struct efx_mtd_partition *parts, · line 103
Quoted 7 lines
drivers/net/ethernet/sfc/mtd.c +3
-4-list_for_each_entry_safe (part, next, &efx->mtd_list, node) -efx_mtd_remove_partition (part); - -kfree (parts); +kfree (efx->mcdi_mtd_parts); + efx->mcdi_mtd_parts =NULL ; + efx->n_mcdi_mtd_parts =0 ;It is safer to first set to NULL/0 before freeing the memory. With this sequence bad things can happen if the thread gets descheduled right after the kfree.
To prevent this we'd also need to use memory barriers. I don't think we need them because all usages of these fields are done under the rtnl lock. I won't apply this change in the new version because I find it useless, but please explain me the reason if you disagree.
Quoted 61 lines
Martin
Quoted 57 lines
drivers/net/ethernet/sfc/mtd.c +3
-3}void efx_mtd_rename (struct efx_nic *efx) { -struct efx_mtd_partition *part; +int i;ASSERT_RTNL (); -list_for_each_entry (part, &efx->mtd_list, node) - efx->type->mtd_rename (part); +for (i =0 ; i < efx->n_mcdi_mtd_parts; i++) + efx->type->mtd_rename (&efx->mcdi_mtd_parts[i].common); }drivers/net/ethernet/sfc/net_driver.h +6
-4@@ -107,6 +107,8 @@ struct hwtstamp_config;struct efx_self_tests ; +struct efx_mcdi_mtd_partition ; +/** * struct efx_buffer - A general-purpose DMA buffer * @addr: host base address of the buffer @@ -865,7 +867,8 @@ enum efx_xdp_tx_queues_mode {* @irq_zero_count: Number of legacy IRQs seen with queue flags == 0 * @irq_level: IRQ level/index for IRQs not triggered by an event queue * @selftest_work: Work item for asynchronous self-test -* @mtd_list: List of MTDs attached to the NIC +* @mcdi_mtd_parts: Array of MTDs attached to the NIC +* @n_mcdi_mtd_parts: Number of MTDs attached to the NIC * @nic_data: Hardware dependent state * @mcdi: Management-Controller-to-Driver Interface state * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, @@ -1033,7 +1036,8 @@ struct efx_nic {struct delayed_work selftest_work;#ifdef CONFIG_SFC_MTD -struct list_head mtd_list; +struct efx_mcdi_mtd_partition *mcdi_mtd_parts; +unsigned int n_mcdi_mtd_parts;#endif void *nic_data;@@ -1134,7 +1138,6 @@ static inline unsigned int efx_port_num(struct efx_nic *efx) }struct efx_mtd_partition { -struct list_head node;struct mtd_info mtd;const char *dev_type_name;const char *type_name; --2.34.1
Signature · 1 line
Íñigo Huguet