md: remove most calls to bdevname
Subsystems (2)
PATCH 1/1 md: remove most calls to bdevname
Use the %pg format specifier to save on stack consuption and code size.
--- drivers/md/md-linear.c | 5 +- drivers/md/md-multipath.c | 15 ++-- drivers/md/md.c | 152 ++++++++++++++++---------------------- drivers/md/raid0.c | 28 +++---- drivers/md/raid1.c | 24 +++--- drivers/md/raid10.c | 54 ++++++-------- drivers/md/raid5-cache.c | 5 +- drivers/md/raid5-ppl.c | 27 +++---- drivers/md/raid5.c | 37 ++++------ 9 files changed, 147 insertions(+), 200 deletions(-)
drivers/md/md-linear.c +2 -3
@@ -206,7 +206,6 @@ static void linear_free(struct mddev *mddev, void *priv)static bool linear_make_request (struct mddev *mddev,struct bio *bio) { -char b[BDEVNAME_SIZE ];struct dev_info *tmp_dev;sector_t start_sector, end_sector, data_offset;sector_t bio_sector = bio->bi_iter.bi_sector;
@@ -256,10 +255,10 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)return true; out_of_bounds: -pr_err ("md/linear:%s: make_request: Sector %llu out of bounds on dev %s: %llu sectors, offset %llu\n" , +pr_err ("md/linear:%s: make_request: Sector %llu out of bounds on dev %pg: %llu sectors, offset %llu\n" ,mdname (mddev), (unsigned long long )bio->bi_iter.bi_sector, -bdevname (tmp_dev->rdev->bdev, b), + tmp_dev->rdev->bdev, (unsigned long long )tmp_dev->rdev->sectors, (unsigned long long )start_sector);bio_io_error (bio);
drivers/md/md-multipath.c +6 -9
@@ -87,10 +87,9 @@ static void multipath_end_request(struct bio *bio)/* * oops, IO error: */ -char b[BDEVNAME_SIZE ];md_error (mp_bh->mddev, rdev); -pr_info ("multipath: %s: rescheduling sector %llu\n" , -bdevname (rdev->bdev,b), +pr_info ("multipath: %pg: rescheduling sector %llu\n" , + rdev->bdev, (unsigned long long )bio->bi_iter.bi_sector);multipath_reschedule_retry (mp_bh); }else
@@ -154,7 +153,6 @@ static void multipath_status(struct seq_file *seq, struct mddev *mddev)static void multipath_error (struct mddev *mddev,struct md_rdev *rdev) {struct mpconf *conf = mddev->private; -char b[BDEVNAME_SIZE ];if (conf->raid_disks - mddev->degraded <=1 ) {/*
@@ -177,9 +175,9 @@ static void multipath_error (struct mddev *mddev, struct md_rdev *rdev) }set_bit (Faulty, &rdev->flags);set_bit (MD_SB_CHANGE_DEVS , &mddev->sb_flags); -pr_err ("multipath: IO failure on %s, disabling IO path.\n" +pr_err ("multipath: IO failure on %pg, disabling IO path.\n" "multipath: Operation continuing on %d IO paths.\n" , -bdevname (rdev->bdev, b), + rdev->bdev, conf->raid_disks - mddev->degraded); }
@@ -197,12 +195,11 @@ static void print_multipath_conf (struct mpconf *conf) conf->raid_disks);for (i =0 ; i < conf->raid_disks; i++) { -char b[BDEVNAME_SIZE ]; tmp = conf->multipaths + i;if (tmp->rdev) -pr_debug (" disk%d, o:%d, dev:%s\n" , +pr_debug (" disk%d, o:%d, dev:%pg\n" , i,!test_bit (Faulty, &tmp->rdev->flags), -bdevname (tmp->rdev->bdev,b)); + tmp->rdev->bdev); } }
drivers/md/md.c +65 -87
429 lines not on this page · raw message
drivers/md/raid0.c +12 -16
@@ -37,7 +37,6 @@ static void dump_zones(struct mddev *mddev)int j, k;sector_t zone_size =0 ;sector_t zone_start =0 ; -char b[BDEVNAME_SIZE ];struct r0conf *conf = mddev->private;int raid_disks = conf->strip_zone[0 ].nb_dev; pr_debug("md: RAID0 configuration for %s - %d zone%s\n",
@@ -48,9 +47,8 @@ static void dump_zones(struct mddev *mddev)int len =0 ;for (k =0 ; k < conf->strip_zone[j].nb_dev; k++) - len +=snprintf (line+len,200 -len,"%s%s" , k?"/" :"" , -bdevname (conf->devlist[j*raid_disks - + k]->bdev, b)); + len +=snprintf (line+len,200 -len,"%s%pg" , k?"/" :"" , + conf->devlist[j * raid_disks + k]->bdev);pr_debug ("md: zone%d=[%s]\n" , j, line); zone_size = conf->strip_zone[j].zone_end - zone_start;
@@ -69,8 +67,6 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)struct md_rdev *smallest, *rdev1, *rdev2, *rdev, **dev;struct strip_zone *zone;int cnt; -char b[BDEVNAME_SIZE ]; -char b2[BDEVNAME_SIZE ];struct r0conf *conf =kzalloc (sizeof (*conf),GFP_KERNEL );unsigned blksize =512 ;
@@ -78,9 +74,9 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)if (!conf)return -ENOMEM ;rdev_for_each (rdev1, mddev) { -pr_debug ("md/raid0:%s: looking at %s\n" , +pr_debug ("md/raid0:%s: looking at %pg\n" ,mdname (mddev), -bdevname (rdev1->bdev, b)); + rdev1->bdev); c =0 ;/* round size to chunk_size */
@@ -92,12 +88,12 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) rdev1->bdev->bd_disk->queue));rdev_for_each (rdev2, mddev) { -pr_debug ("md/raid0:%s: comparing %s(%llu)" -" with %s(%llu)\n" , +pr_debug ("md/raid0:%s: comparing %pg(%llu)" +" with %pg(%llu)\n" ,mdname (mddev), -bdevname (rdev1->bdev,b), + rdev1->bdev, (unsigned long long )rdev1->sectors, -bdevname (rdev2->bdev,b2), + rdev2->bdev, (unsigned long long )rdev2->sectors);if (rdev2 == rdev1) { pr_debug("md/raid0:%s: END\n",
@@ -225,15 +221,15 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)for (j=0 ; j<cnt; j++) { rdev = conf->devlist[j];if (rdev->sectors <= zone->dev_start) { -pr_debug ("md/raid0:%s: checking %s ... nope\n" , +pr_debug ("md/raid0:%s: checking %pg ... nope\n" ,mdname (mddev), -bdevname (rdev->bdev, b)); + rdev->bdev);continue ; } -pr_debug ("md/raid0:%s: checking %s ..." +pr_debug ("md/raid0:%s: checking %pg ..." " contained as device %d\n" ,mdname (mddev), -bdevname (rdev->bdev, b), c); + rdev->bdev, c); dev[c] = rdev; c++;if (!smallest || rdev->sectors < smallest->sectors) {
drivers/md/raid1.c +10 -14
@@ -402,10 +402,9 @@ static void raid1_end_read_request(struct bio *bio)/* * oops, read error: */ -char b[BDEVNAME_SIZE ]; -pr_err_ratelimited ("md/raid1:%s: %s: rescheduling sector %llu\n" , +pr_err_ratelimited ("md/raid1:%s: %pg: rescheduling sector %llu\n" ,mdname (conf->mddev), -bdevname (rdev->bdev, b), + rdev->bdev, (unsigned long long )r1_bio->sector);set_bit (R1BIO_ReadError, &r1_bio->state);reschedule_retry (r1_bio);
@@ -1283,10 +1282,10 @@ static void raid1_read_request(struct mddev *mddev, struct bio *bio, mirror = conf->mirrors + rdisk;if (r1bio_existed) -pr_info_ratelimited ("md/raid1:%s: redirecting sector %llu to other mirror: %s\n" , +pr_info_ratelimited ("md/raid1:%s: redirecting sector %llu to other mirror: %pg\n" ,mdname (mddev), (unsigned long long )r1_bio->sector, -bdevname (mirror->rdev->bdev, b)); + mirror->rdev->bdev);if (test_bit (WriteMostly, &mirror->rdev->flags) && bitmap) {
@@ -1659,7 +1658,6 @@ static void raid1_status(struct seq_file *seq, struct mddev *mddev)*/ static void raid1_error (struct mddev *mddev,struct md_rdev *rdev) { -char b[BDEVNAME_SIZE ];struct r1conf *conf = mddev->private;unsigned long flags;
@@ -1686,9 +1684,9 @@ static void raid1_error(struct mddev *mddev, struct md_rdev *rdev)set_bit (MD_RECOVERY_INTR , &mddev->recovery);set_mask_bits (&mddev->sb_flags,0 ,BIT (MD_SB_CHANGE_DEVS ) |BIT (MD_SB_CHANGE_PENDING )); -pr_crit ("md/raid1:%s: Disk failure on %s, disabling device.\n" +pr_crit ("md/raid1:%s: Disk failure on %pg, disabling device.\n" "md/raid1:%s: Operation continuing on %d devices.\n" , -mdname (mddev),bdevname (rdev->bdev, b), +mdname (mddev), rdev->bdev,mdname (mddev), conf->raid_disks - mddev->degraded); }
@@ -1706,13 +1704,12 @@ static void print_conf(struct r1conf *conf)rcu_read_lock ();for (i =0 ; i < conf->raid_disks; i++) { -char b[BDEVNAME_SIZE ];struct md_rdev *rdev =rcu_dereference (conf->mirrors[i].rdev);if (rdev) -pr_debug (" disk %d, wo:%d, o:%d, dev:%s\n" , +pr_debug (" disk %d, wo:%d, o:%d, dev:%pg\n" , i, !test_bit (In_sync, &rdev->flags), !test_bit (Faulty, &rdev->flags), -bdevname (rdev->bdev,b)); + rdev->bdev); }rcu_read_unlock (); }
@@ -2347,7 +2344,6 @@ static void fix_read_error(struct r1conf *conf, int read_disk, } d = start;while (d != read_disk) { -char b[BDEVNAME_SIZE ];if (d==0 ) d = conf->raid_disks *2 ; d--;
@@ -2360,11 +2356,11 @@ static void fix_read_error(struct r1conf *conf, int read_disk,if (r1_sync_page_io (rdev, sect, s, conf->tmppage,READ )) {atomic_add (s, &rdev->corrected_errors); -pr_info ("md/raid1:%s: read error corrected (%d sectors at %llu on %s)\n" , +pr_info ("md/raid1:%s: read error corrected (%d sectors at %llu on %pg)\n" ,mdname (mddev), s, (unsigned long long )(sect + rdev->data_offset), -bdevname (rdev->bdev, b)); + rdev->bdev); }rdev_dec_pending (rdev, mddev); }else
drivers/md/raid10.c +22 -32
139 lines not on this page · raw message
drivers/md/raid5-cache.c +2 -3
@@ -3064,11 +3064,10 @@ int r5l_init_log(struct r5conf *conf, struct md_rdev *rdev) {struct request_queue *q =bdev_get_queue (rdev->bdev);struct r5l_log *log; -char b[BDEVNAME_SIZE ];int ret; -pr_debug ("md/raid:%s: using device %s as journal\n" , -mdname (conf->mddev),bdevname (rdev->bdev, b)); +pr_debug ("md/raid:%s: using device %pg as journal\n" , +mdname (conf->mddev), rdev->bdev);if (PAGE_SIZE !=4096 )return -EINVAL ;
drivers/md/raid5-ppl.c +12 -15
@@ -798,7 +798,6 @@ static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e,int data_disks;int i;int ret =0 ; -char b[BDEVNAME_SIZE ];unsigned int pp_size =le32_to_cpu (e->pp_size);unsigned int data_size =le32_to_cpu (e->data_size);
@@ -894,8 +893,8 @@ static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e,break ; } -pr_debug ("%s:%*s reading data member disk %s sector %llu\n" , - __func__, indent,"" ,bdevname (rdev->bdev, b), +pr_debug ("%s:%*s reading data member disk %pg sector %llu\n" , + __func__, indent,"" , rdev->bdev, (unsigned long long )sector);if (!sync_page_io (rdev, sector, block_size, page2,REQ_OP_READ ,0 , false)) {
@@ -942,10 +941,10 @@ static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e, conf->disks[sh.pd_idx].rdev, 1);BUG_ON (parity_rdev->bdev->bd_dev != log->rdev->bdev->bd_dev); -pr_debug ("%s:%*s write parity at sector %llu, disk %s\n" , +pr_debug ("%s:%*s write parity at sector %llu, disk %pg\n" , __func__, indent,"" , (unsigned long long )parity_sector, -bdevname (parity_rdev->bdev, b)); + parity_rdev->bdev);if (!sync_page_io (parity_rdev, parity_sector, block_size, page1,REQ_OP_WRITE ,0 , false)) { pr_debug("%s:%*s parity write error!\n", __func__,
@@ -1255,7 +1254,6 @@ void ppl_exit_log(struct r5conf *conf)static int ppl_validate_rdev (struct md_rdev *rdev) { -char b[BDEVNAME_SIZE ];int ppl_data_sectors;int ppl_size_new;
@@ -1272,8 +1270,8 @@ static int ppl_validate_rdev(struct md_rdev *rdev) RAID5_STRIPE_SECTORS((struct r5conf *)rdev->mddev->private));if (ppl_data_sectors <=0 ) { -pr_warn ("md/raid:%s: PPL space too small on %s\n" , -mdname (rdev->mddev),bdevname (rdev->bdev, b)); +pr_warn ("md/raid:%s: PPL space too small on %pg\n" , +mdname (rdev->mddev), rdev->bdev);return -ENOSPC ; }
@@ -1283,16 +1281,16 @@ static int ppl_validate_rdev(struct md_rdev *rdev) rdev->ppl.sector + ppl_size_new > rdev->data_offset) || (rdev->ppl.sector >= rdev->data_offset && rdev->data_offset + rdev->sectors > rdev->ppl.sector)) { -pr_warn ("md/raid:%s: PPL space overlaps with data on %s\n" , -mdname (rdev->mddev),bdevname (rdev->bdev, b)); +pr_warn ("md/raid:%s: PPL space overlaps with data on %pg\n" , +mdname (rdev->mddev), rdev->bdev);return -EINVAL ; }if (!rdev->mddev->external && ((rdev->ppl.offset >0 && rdev->ppl.offset < (rdev->sb_size >>9 )) || (rdev->ppl.offset <=0 && rdev->ppl.offset + ppl_size_new >0 ))) { -pr_warn ("md/raid:%s: PPL space overlaps with superblock on %s\n" , -mdname (rdev->mddev),bdevname (rdev->bdev, b)); +pr_warn ("md/raid:%s: PPL space overlaps with superblock on %pg\n" , +mdname (rdev->mddev), rdev->bdev);return -EINVAL ; }
@@ -1463,14 +1461,13 @@ int ppl_modify_log(struct r5conf *conf, struct md_rdev *rdev, bool add)struct ppl_conf *ppl_conf = conf->log_private;struct ppl_log *log;int ret =0 ; -char b[BDEVNAME_SIZE ];if (!rdev)return -EINVAL ; -pr_debug ("%s: disk: %d operation: %s dev: %s\n" , +pr_debug ("%s: disk: %d operation: %s dev: %pg\n" , __func__, rdev->raid_disk, add ?"add" :"remove" , -bdevname (rdev->bdev, b)); + rdev->bdev);if (rdev->raid_disk <0 )return 0 ;
drivers/md/raid5.c +16 -21
@@ -2686,7 +2686,6 @@ static void raid5_end_read_request(struct bio * bi)struct stripe_head *sh = bi->bi_private;struct r5conf *conf = sh->raid_conf;int disks = sh->disks, i; -char b[BDEVNAME_SIZE ];struct md_rdev *rdev =NULL ;sector_t s;
@@ -2723,10 +2722,10 @@ static void raid5_end_read_request(struct bio * bi)* any error */ pr_info_ratelimited ( -"md/raid:%s: read error corrected (%lu sectors at %llu on %s)\n" , +"md/raid:%s: read error corrected (%lu sectors at %llu on %pg)\n" ,mdname (conf->mddev),RAID5_STRIPE_SECTORS (conf), (unsigned long long )s, -bdevname (rdev->bdev, b)); + rdev->bdev);atomic_add (RAID5_STRIPE_SECTORS (conf), &rdev->corrected_errors);clear_bit (R5_ReadError, &sh->dev[i].flags);clear_bit (R5_ReWrite, &sh->dev[i].flags);
@@ -2743,7 +2742,6 @@ static void raid5_end_read_request(struct bio * bi)if (atomic_read (&rdev->read_errors))atomic_set (&rdev->read_errors,0 ); }else { -const char *bdn =bdevname (rdev->bdev, b);int retry =0 ;int set_bad =0 ;
@@ -2752,25 +2750,25 @@ static void raid5_end_read_request(struct bio * bi)atomic_inc (&rdev->read_errors);if (test_bit (R5_ReadRepl, &sh->dev[i].flags))pr_warn_ratelimited ( -"md/raid:%s: read error on replacement device (sector %llu on %s).\n" , +"md/raid:%s: read error on replacement device (sector %llu on %pg).\n" ,mdname (conf->mddev), (unsigned long long )s, - bdn); + rdev->bdev);else if (conf->mddev->degraded >= conf->max_degraded) { set_bad =1 ;pr_warn_ratelimited ( -"md/raid:%s: read error not correctable (sector %llu on %s).\n" , +"md/raid:%s: read error not correctable (sector %llu on %pg).\n" ,mdname (conf->mddev), (unsigned long long )s, - bdn); + rdev->bdev); }else if (test_bit (R5_ReWrite, &sh->dev[i].flags)) {/* Oh, no!!! */ set_bad =1 ;pr_warn_ratelimited ( -"md/raid:%s: read error NOT corrected!! (sector %llu on %s).\n" , +"md/raid:%s: read error NOT corrected!! (sector %llu on %pg).\n" ,mdname (conf->mddev), (unsigned long long )s, - bdn); + rdev->bdev); }else if (atomic_read (&rdev->read_errors) > conf->max_nr_stripes) {if (!test_bit (Faulty, &rdev->flags)) {
@@ -2778,8 +2776,8 @@ static void raid5_end_read_request(struct bio * bi)mdname (conf->mddev),atomic_read (&rdev->read_errors), conf->max_nr_stripes); -pr_warn ("md/raid:%s: Too many read errors, failing device %s.\n" , -mdname (conf->mddev), bdn); +pr_warn ("md/raid:%s: Too many read errors, failing device %pg.\n" , +mdname (conf->mddev), rdev->bdev); } }else retry =1 ;
@@ -2891,13 +2889,12 @@ static void raid5_end_write_request(struct bio *bi)static void raid5_error (struct mddev *mddev,struct md_rdev *rdev) { -char b[BDEVNAME_SIZE ];struct r5conf *conf = mddev->private;unsigned long flags;pr_debug ("raid456: error called\n" ); -pr_crit ("md/raid:%s: Disk failure on %s, disabling device.\n" , -mdname (mddev),bdevname (rdev->bdev, b)); +pr_crit ("md/raid:%s: Disk failure on %pg, disabling device.\n" , +mdname (mddev), rdev->bdev);spin_lock_irqsave (&conf->device_lock, flags);set_bit (Faulty, &rdev->flags);
@@ -7359,9 +7356,8 @@ static struct r5conf *setup_conf(struct mddev *mddev) }if (test_bit (In_sync, &rdev->flags)) { -char b[BDEVNAME_SIZE ]; -pr_info ("md/raid:%s: device %s operational as raid disk %d\n" , -mdname (mddev),bdevname (rdev->bdev, b), raid_disk); +pr_info ("md/raid:%s: device %pg operational as raid disk %d\n" , +mdname (mddev), rdev->bdev, raid_disk); }else if (rdev->saved_raid_disk != raid_disk)/* Cannot rely on bitmap to complete recovery */ conf->fullsync =1 ;
@@ -7877,12 +7873,11 @@ static void print_raid5_conf (struct r5conf *conf)rcu_read_lock ();for (i =0 ; i < conf->raid_disks; i++) { -char b[BDEVNAME_SIZE ]; rdev =rcu_dereference (conf->disks[i].rdev);if (rdev) -pr_debug (" disk %d, o:%d, dev:%s\n" , +pr_debug (" disk %d, o:%d, dev:%pg\n" , i, !test_bit (Faulty, &rdev->flags), -bdevname (rdev->bdev, b)); + rdev->bdev); }rcu_read_unlock (); }
Signature · 1 line
2.30.2
Dear Christoph,
Thank you for the patch.
Am 12.05.22 um 08:19 schrieb Christoph Hellwig:
Quoted 1 line
Use the %pg format specifier to save on stack consuption and code size.
consu*m*ption
Did you do any measurements?
[…]
Kind regards,
Paul
Quoted 11 lines · Paul Menzel
Dear Christoph,
Thank you for the patch.
Am 12.05.22 um 08:19 schrieb Christoph Hellwig:
Quoted 1 line
Use the %pg format specifier to save on stack consuption and code size.
consu*m*ption
Did you do any measurements?
Each BDEVNAME_SIZE array consumes 32 bytes on the stack, and they are gone now without any additional stack usage elsewhere.
Dear Christoph,
Am 12.05.22 um 08:27 schrieb Christoph Hellwig:
Quoted 11 lines · Paul Menzel
Quoted 7 lines
Am 12.05.22 um 08:19 schrieb Christoph Hellwig:
Quoted 1 line
Use the %pg format specifier to save on stack consuption and code size.
consu*m*ption
Did you do any measurements?
Each
BDEVNAME_SIZEarray consumes 32 bytes on the stack, and they are gone now without any additional stack usage elsewhere.
Understood.
For comparing the code size, out of curiosity, I built drivers/md from md-next, commit 74fe94569da7 (md: protect md_unregister_thread from reentrancy), without and with your patch with gcc 11.1.0, and got:
``` $ diff -u <(cd drivers/md-before/ && du -a | sort -k2) <(cd drivers/md/ && du -a | sort -k2) --- /dev/fd/63 2022-05-12 09:51:23.354107016 +0200 +++ /dev/fd/62 2022-05-12 09:51:23.355107064 +0200 @@ -1,4 +1,4 @@ -11064 . +11052 . 4 ./.built-in.a.cmd 48 ./.dm-bio-prison-v1.o.cmd 20 ./.dm-bio-prison-v1.o.d @@ -287,7 +287,7 @@ 24 ./md-multipath.o 260 ./md.c 28 ./md.h -308 ./md.o +304 ./md.o 4 ./modules.order 1380 ./persistent-data 48 ./persistent-data/.dm-array.o.cmd @@ -356,7 +356,7 @@ 148 ./raid10.c 8 ./raid10.h 4 ./raid10.mod -108 ./raid10.o +104 ./raid10.o 88 ./raid5-cache.c 76 ./raid5-cache.o 8 ./raid5-log.h @@ -364,4 +364,4 @@ 48 ./raid5-ppl.o 252 ./raid5.c 32 ./raid5.h -212 ./raid5.o +208 ./raid5.o ```
Kind regards,
Paul
Quoted 61 lines · Paul Menzel
Dear Christoph,
Am 12.05.22 um 08:27 schrieb Christoph Hellwig:
Quoted 11 lines · Paul Menzel
Quoted 7 lines
Am 12.05.22 um 08:19 schrieb Christoph Hellwig:
Quoted 1 line
Use the %pg format specifier to save on stack consuption and code size.
consu*m*ption
Did you do any measurements?
Each
BDEVNAME_SIZEarray consumes 32 bytes on the stack, and they are gone now without any additional stack usage elsewhere.Understood.
For comparing the code size, out of curiosity, I built
drivers/mdfrom md-next, commit74fe94569da7(md: protectmd_unregister_threadfrom reentrancy), without and with your patch with gcc 11.1.0, and got:```
$ diff -u <(cd drivers/md-before/ && du -a | sort -k2) <(cd drivers/md/ && du -a | sort -k2)dev/fd/62 2022-05-12 09:51:23.355107064 +0200 renamed from dev/fd/63 2022-05-12 09:51:23.354107016 +0200 +4
-4@@ -1,4 +1,4 @@ -11064 . +11052 . 4 ./.built-in.a.cmd 48 ./.dm-bio-prison-v1.o.cmd 20 ./.dm-bio-prison-v1.o.d@@ -287,7 +287,7 @@ 24 ./md-multipath.o 260 ./md.c 28 ./md.h -308 ./md.o +304 ./md.o 4 ./modules.order 1380 ./persistent-data 48 ./persistent-data/.dm-array.o.cmd@@ -356,7 +356,7 @@ 148 ./raid10.c 8 ./raid10.h 4 ./raid10.mod -108 ./raid10.o +104 ./raid10.o 88 ./raid5-cache.c 76 ./raid5-cache.o 8 ./raid5-log.h@@ -364,4 +364,4 @@ 48 ./raid5-ppl.o 252 ./raid5.c 32 ./raid5.h -212 ./raid5.o +208 ./raid5.o```
Quoted 3 lines
Kind regards,
Paul
Applied to md-next. Thanks!
Song