Skip to contentSkip to conversation

Introduce MediaTek CCI devfreq driver

PATCH Superseded Johnson Wang 1 participant 3 messages May 12, 2022

Subsystems (4)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v4 cover Introduce MediaTek CCI devfreq driver

The Cache Coherent Interconnect (CCI) is the management of cache coherency by hardware. CCI DEVFREQ is DVFS driver for power saving by scaling clock frequency and supply voltage of CCI. CCI uses the same input clock source and power rail as LITTLE CPUs on Mediatek SoCs.

This series depends on:
Chanwoo's repo: kernel/git/chanwoo/linux.git
branch: devfreq-testing
[1]: PM / devfreq: Export devfreq_get_freq_range symbol within devfreq [2]: PM / devfreq: Add cpu based scaling support to passive governor [3]: PM / devfreq: passive: Reduce duplicate code when passive_devfreq case [4]: PM / devfreq: passive: Update frequency when start governor

Changes in v4:
- Add a maintainer in the binding document.
- Modify clock description.
- Add binding document into MAINTAINERS.
- Replace format specifier %d with %ld.

Changes in v3:
- Move binding document to 'interconnect' and rename it.
- Add COMPILE_TEST dependence symbol.
- Remove need_voltage_tracking variable.
- Move mtk_ccifreq_voltage_tracking() code into mtk_ccifreq_set_voltage().
- Add an interation limit in the while() loop.
- Replace 'cci_dev' with 'dev'
- Replace old_* with pre_*
- Remove of_match_ptr()
- Use module_platform_driver()

Changes in v2:
- Take MT8183 as example in binding document.
- Use dev_err() instead of pr_err().
- Use 'goto' statement to handle error case.
- Clean up driver code.

Johnson Wang (2):
dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver

 .../bindings/interconnect/mediatek,cci.yaml   | 140 ++++++
 MAINTAINERS                                   |   1 +
 drivers/devfreq/Kconfig                       |  10 +
 drivers/devfreq/Makefile                      |   1 +
 drivers/devfreq/mtk-cci-devfreq.c             | 474 ++++++++++++++++++
 5 files changed, 626 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
 create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
Signature · 1 line
2.18.0
#1 lore raw

PATCH v4 1/2 dt-bindings: interconnect: Add MediaTek CCI dt-bindings

Add devicetree binding of MediaTek CCI on MT8183 and MT8186.

---
 .../bindings/interconnect/mediatek,cci.yaml   | 140 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml new file +140 -0
new file mode 100644
index 000000000000..034c3b38ca3d
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <[email protected]>
+  - Johnson Wang <[email protected]>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-cci
+      - mediatek,mt8186-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "cpu" clock which is used as an intermediate clock source
+          when the original CPU is under transition and not stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table: true
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
MAINTAINERS +1 -0
index e8c52d0192a6..69f03077f77c 100644
@@ -5698,6 +5698,7 @@ L:	[email protected]
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
 F:	Documentation/devicetree/bindings/devfreq/
+F:	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
 F:	drivers/devfreq/
 F:	include/linux/devfreq.h
 F:	include/trace/events/devfreq.h
Signature · 1 line
2.18.0
#2 lore raw

PATCH v4 2/2 PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver

In reply to Johnson Wang

We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect (CCI) used by some MediaTek SoCs.

In this driver, we use the passive devfreq driver to get target frequencies and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI is supplied by the same regulators with the little core CPUs.

---
This patch depends on "devfreq-testing"[1]. [1]https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing

---
 drivers/devfreq/Kconfig           |  10 +
 drivers/devfreq/Makefile          |   1 +
 drivers/devfreq/mtk-cci-devfreq.c | 474 ++++++++++++++++++++++++++++++
 3 files changed, 485 insertions(+)
 create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
drivers/devfreq/Kconfig +10 -0
index 87eb2b837e68..9754d8b31621 100644
@@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ
 	  It reads ACTMON counters of memory controllers and adjusts the
 	  operating frequencies and voltages with OPP support.
 
+config ARM_MEDIATEK_CCI_DEVFREQ
+	tristate "MEDIATEK CCI DEVFREQ Driver"
+	depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST
+	select DEVFREQ_GOV_PASSIVE
+	help
+	  This adds a devfreq driver for MediaTek Cache Coherent Interconnect
+	  which is shared the same regulators with the cpu cluster. It can track
+	  buck voltages and update a proper CCI frequency. Use the notification
+	  to get the regulator status.
+
 config ARM_RK3399_DMC_DEVFREQ
 	tristate "ARM RK3399 DMC DEVFREQ Driver"
 	depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \
drivers/devfreq/Makefile +1 -0
index 0b6be92a25d9..bf40d04928d0 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
 obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ)	+= imx-bus.o
 obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
+obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ)	+= mtk-cci-devfreq.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ)	+= sun8i-a33-mbus.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
drivers/devfreq/mtk-cci-devfreq.c new file +474 -0

474 lines not on this page · raw message

Signature · 1 line
2.18.0