4.9.314-rc1 review

This is the start of the stable review cycle for the 4.9.314 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 15 May 2022 14:22:19 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.314-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.314-rc1

Muchun Song <[email protected]>
mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic()

Ricky WU <[email protected]>
mmc: rtsx: add 74 Clocks in power on flow

Itay Iellin <[email protected]>

    Bluetooth: Fix the creation of hdev->name

Andreas Larsson <[email protected]>
can: grcan: only use the NAPI poll budget for RX

Andreas Larsson <[email protected]>
can: grcan: grcan_probe(): fix broken system id check for errata workaround needs

Lee Jones <[email protected]>
block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit

Nathan Chancellor <[email protected]>
MIPS: Use address-of operator on section symbols

-------------

Diffstat:

 Makefile                          |  4 ++--
 arch/mips/bmips/setup.c           |  2 +-
 arch/mips/lantiq/prom.c           |  2 +-
 arch/mips/pic32/pic32mzda/init.c  |  2 +-
 drivers/block/drbd/drbd_nl.c      | 13 ++++++++-----
 drivers/mmc/host/rtsx_pci_sdmmc.c | 30 ++++++++++++++++++++----------
 drivers/net/can/grcan.c           | 38 ++++++++++++++++++--------------------
 include/net/bluetooth/hci_core.h  |  3 +++
 mm/userfaultfd.c                  |  3 +++
 net/bluetooth/hci_core.c          |  6 +++---
 10 files changed, 60 insertions(+), 43 deletions(-)

From: Nathan Chancellor <[email protected]>

commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream.

When building xway_defconfig with clang:

arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare]

        else if (__dtb_start != __dtb_end)
                             ^

1 error generated.

These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison.

---
 arch/mips/bmips/setup.c          |    2 +-
 arch/mips/lantiq/prom.c          |    2 +-
 arch/mips/pic32/pic32mzda/init.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

@@ -174,7 +174,7 @@ void __init plat_mem_setup(void)
 		dtb = phys_to_virt(fw_arg2);
 	else if (fw_passed_dtb) /* UHI interface */
 		dtb = (void *)fw_passed_dtb;
-	else if (__dtb_start != __dtb_end)
+	else if (&__dtb_start != &__dtb_end)
 		dtb = (void *)__dtb_start;
 	else
 		panic("no dtb found");

@@ -76,7 +76,7 @@ void __init plat_mem_setup(void)
 
 	if (fw_passed_dtb) /* UHI interface */
 		dtb = (void *)fw_passed_dtb;
-	else if (__dtb_start != __dtb_end)
+	else if (&__dtb_start != &__dtb_end)
 		dtb = (void *)__dtb_start;
 	else
 		panic("no dtb found");

@@ -36,7 +36,7 @@ static ulong get_fdtaddr(void)
 	if (fw_passed_dtb && !fw_arg2 && !fw_arg3)
 		return (ulong)fw_passed_dtb;
 
-	if (__dtb_start < __dtb_end)
+	if (&__dtb_start < &__dtb_end)
 		ftaddr = (ulong)__dtb_start;
 
 	return ftaddr;

From: Lee Jones <[email protected]>

commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream.

Fixes the following W=1 kernel build warning(s):

from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]

---
 drivers/block/drbd/drbd_nl.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

@@ -774,9 +774,11 @@ int drbd_adm_set_role(struct sk_buff *sk
 	mutex_lock(&adm_ctx.resource->adm_mutex);
 
 	if (info->genlhdr->cmd == DRBD_ADM_PRIMARY)
-		retcode = drbd_set_role(adm_ctx.device, R_PRIMARY, parms.assume_uptodate);
+		retcode = (enum drbd_ret_code)drbd_set_role(adm_ctx.device,
+						R_PRIMARY, parms.assume_uptodate);
 	else
-		retcode = drbd_set_role(adm_ctx.device, R_SECONDARY, 0);
+		retcode = (enum drbd_ret_code)drbd_set_role(adm_ctx.device,
+						R_SECONDARY, 0);
 
 	mutex_unlock(&adm_ctx.resource->adm_mutex);
 	genl_lock();

@@ -1933,7 +1935,7 @@ int drbd_adm_attach(struct sk_buff *skb,
 	drbd_flush_workqueue(&connection->sender_work);
 
 	rv = _drbd_request_state(device, NS(disk, D_ATTACHING), CS_VERBOSE);
-	retcode = rv;  /* FIXME: Type mismatch. */
+	retcode = (enum drbd_ret_code)rv;
 	drbd_resume_io(device);
 	if (rv < SS_SUCCESS)
 		goto fail;

@@ -2684,7 +2686,8 @@ int drbd_adm_connect(struct sk_buff *skb
 	}
 	rcu_read_unlock();
 
-	retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
+	retcode = (enum drbd_ret_code)conn_request_state(connection,
+					NS(conn, C_UNCONNECTED), CS_VERBOSE);
 
 	conn_reconfig_done(connection);
 	mutex_unlock(&adm_ctx.resource->adm_mutex);

@@ -2790,7 +2793,7 @@ int drbd_adm_disconnect(struct sk_buff *
 	mutex_lock(&adm_ctx.resource->adm_mutex);
 	rv = conn_try_disconnect(connection, parms.force_disconnect);
 	if (rv < SS_SUCCESS)
-		retcode = rv;  /* FIXME: Type mismatch. */
+		retcode = (enum drbd_ret_code)rv;
 	else
 		retcode = NO_ERROR;
 	mutex_unlock(&adm_ctx.resource->adm_mutex);

From: Andreas Larsson <[email protected]>

commit 1e93ed26acf03fe6c97c6d573a10178596aadd43 upstream.

The systemid property was checked for in the wrong place of the device tree and compared to the wrong value.

---
 drivers/net/can/grcan.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

@@ -245,7 +245,7 @@ struct grcan_device_config {
 		.rxsize		= GRCAN_DEFAULT_BUFFER_SIZE,	\
 		}
 
-#define GRCAN_TXBUG_SAFE_GRLIB_VERSION	0x4100
+#define GRCAN_TXBUG_SAFE_GRLIB_VERSION	4100
 #define GRLIB_VERSION_MASK		0xffff
 
 /* GRCAN private data structure */

@@ -1665,6 +1665,7 @@ exit_free_candev:
 static int grcan_probe(struct platform_device *ofdev)
 {
 	struct device_node *np = ofdev->dev.of_node;
+	struct device_node *sysid_parent;
 	struct resource *res;
 	u32 sysid, ambafreq;
 	int irq, err;

@@ -1674,10 +1675,15 @@ static int grcan_probe(struct platform_d
 	/* Compare GRLIB version number with the first that does not
 	 * have the tx bug (see start_xmit)
 	 */
-	err = of_property_read_u32(np, "systemid", &sysid);
-	if (!err && ((sysid & GRLIB_VERSION_MASK)
-		     >= GRCAN_TXBUG_SAFE_GRLIB_VERSION))
-		txbug = false;
+	sysid_parent = of_find_node_by_path("/ambapp0");
+	if (sysid_parent) {
+		of_node_get(sysid_parent);
+		err = of_property_read_u32(sysid_parent, "systemid", &sysid);
+		if (!err && ((sysid & GRLIB_VERSION_MASK) >=
+			     GRCAN_TXBUG_SAFE_GRLIB_VERSION))
+			txbug = false;
+		of_node_put(sysid_parent);
+	}
 
 	err = of_property_read_u32(np, "freq", &ambafreq);
 	if (err) {

From: Andreas Larsson <[email protected]>

commit 2873d4d52f7c52d60b316ba6c47bd7122b5a9861 upstream.

The previous split budget between TX and RX made it return not using the entire budget but at the same time not having calling called napi_complete. This sometimes led to the poll to not be called, and at the same time having TX and RX interrupts disabled resulting in the driver getting stuck.

---
 drivers/net/can/grcan.c |   22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

@@ -1141,7 +1141,7 @@ static int grcan_close(struct net_device
 	return 0;
 }
 
-static int grcan_transmit_catch_up(struct net_device *dev, int budget)
+static void grcan_transmit_catch_up(struct net_device *dev)
 {
 	struct grcan_priv *priv = netdev_priv(dev);
 	unsigned long flags;

@@ -1149,7 +1149,7 @@ static int grcan_transmit_catch_up(struc
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	work_done = catch_up_echo_skb(dev, budget, true);
+	work_done = catch_up_echo_skb(dev, -1, true);
 	if (work_done) {
 		if (!priv->resetting && !priv->closing &&
 		    !(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))

@@ -1163,8 +1163,6 @@ static int grcan_transmit_catch_up(struc
 	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return work_done;
 }
 
 static int grcan_receive(struct net_device *dev, int budget)

@@ -1246,19 +1244,13 @@ static int grcan_poll(struct napi_struct
 	struct net_device *dev = priv->dev;
 	struct grcan_registers __iomem *regs = priv->regs;
 	unsigned long flags;
-	int tx_work_done, rx_work_done;
-	int rx_budget = budget / 2;
-	int tx_budget = budget - rx_budget;
+	int work_done;
 
-	/* Half of the budget for receiveing messages */
-	rx_work_done = grcan_receive(dev, rx_budget);
+	work_done = grcan_receive(dev, budget);
 
-	/* Half of the budget for transmitting messages as that can trigger echo
-	 * frames being received
-	 */
-	tx_work_done = grcan_transmit_catch_up(dev, tx_budget);
+	grcan_transmit_catch_up(dev);
 
-	if (rx_work_done < rx_budget && tx_work_done < tx_budget) {
+	if (work_done < budget) {
 		napi_complete(napi);
 
 		/* Guarantee no interference with a running reset that otherwise

@@ -1275,7 +1267,7 @@ static int grcan_poll(struct napi_struct
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	return rx_work_done + tx_work_done;
+	return work_done;
 }
 
 /* Work tx bug by waiting while for the risky situation to clear. If that fails,

From: Itay Iellin <[email protected]>

commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream.

Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation.

Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000.

---
 include/net/bluetooth/hci_core.h |    3 +++
 net/bluetooth/hci_core.c         |    6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)

@@ -32,6 +32,9 @@
 /* HCI priority */
 #define HCI_PRIO_MAX	7
 
+/* HCI maximum id value */
+#define HCI_MAX_ID 10000
+
 /* HCI Core structures */
 struct inquiry_data {
 	bdaddr_t	bdaddr;

@@ -3064,10 +3064,10 @@ int hci_register_dev(struct hci_dev *hde
 	 */
 	switch (hdev->dev_type) {
 	case HCI_PRIMARY:
-		id = ida_simple_get(&hci_index_ida, 0, 0, GFP_KERNEL);
+		id = ida_simple_get(&hci_index_ida, 0, HCI_MAX_ID, GFP_KERNEL);
 		break;
 	case HCI_AMP:
-		id = ida_simple_get(&hci_index_ida, 1, 0, GFP_KERNEL);
+		id = ida_simple_get(&hci_index_ida, 1, HCI_MAX_ID, GFP_KERNEL);
 		break;
 	default:
 		return -EINVAL;

@@ -3076,7 +3076,7 @@ int hci_register_dev(struct hci_dev *hde
 	if (id < 0)
 		return id;
 
-	sprintf(hdev->name, "hci%d", id);
+	snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
 	hdev->id = id;
 
 	BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);

From: Ricky WU <[email protected]>

commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream.

SD spec definition:
"Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals

if POWER STATE is
MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card

---
 drivers/mmc/host/rtsx_pci_sdmmc.c |   30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

@@ -49,10 +49,7 @@ struct realtek_pci_sdmmc {
 	bool			double_clk;
 	bool			eject;
 	bool			initial_mode;
-	int			power_state;
-#define SDMMC_POWER_ON		1
-#define SDMMC_POWER_OFF		0
-
+	int			prev_power_state;
 	int			sg_count;
 	s32			cookie;
 	int			cookie_sg_count;

@@ -914,14 +911,21 @@ static int sd_set_bus_width(struct realt
 	return err;
 }
 
-static int sd_power_on(struct realtek_pci_sdmmc *host)
+static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
 {
 	struct rtsx_pcr *pcr = host->pcr;
 	int err;
 
-	if (host->power_state == SDMMC_POWER_ON)
+	if (host->prev_power_state == MMC_POWER_ON)
 		return 0;
 
+	if (host->prev_power_state == MMC_POWER_UP) {
+		rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, 0);
+		goto finish;
+	}
+
+	msleep(100);
+
 	rtsx_pci_init_cmd(pcr);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,

@@ -940,11 +944,17 @@ static int sd_power_on(struct realtek_pc
 	if (err < 0)
 		return err;
 
+	mdelay(1);
+
 	err = rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
 	if (err < 0)
 		return err;
 
-	host->power_state = SDMMC_POWER_ON;
+	/* send at least 74 clocks */
+	rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
+
+finish:
+	host->prev_power_state = power_mode;
 	return 0;
 }
 

@@ -953,7 +963,7 @@ static int sd_power_off(struct realtek_p
 	struct rtsx_pcr *pcr = host->pcr;
 	int err;
 
-	host->power_state = SDMMC_POWER_OFF;
+	host->prev_power_state = MMC_POWER_OFF;
 
 	rtsx_pci_init_cmd(pcr);
 

@@ -979,7 +989,7 @@ static int sd_set_power_mode(struct real
 	if (power_mode == MMC_POWER_OFF)
 		err = sd_power_off(host);
 	else
-		err = sd_power_on(host);
+		err = sd_power_on(host, power_mode);
 
 	return err;
 }

@@ -1417,7 +1427,7 @@ static int rtsx_pci_sdmmc_drv_probe(stru
 	host->mmc = mmc;
 	host->pdev = pdev;
 	host->cookie = -1;
-	host->power_state = SDMMC_POWER_OFF;
+	host->prev_power_state = MMC_POWER_OFF;
 	INIT_WORK(&host->work, sd_request);
 	platform_set_drvdata(pdev, host);
 	pcr->slots[RTSX_SD_CARD].p_dev = pdev;

From: Muchun Song <[email protected]>

commit 7c25a0b89a487878b0691e6524fb5a8827322194 upstream.

userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this by insert flush_dcache_page() after copy_from_user() succeeds.

---
 mm/userfaultfd.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -50,6 +50,8 @@ static int mcopy_atomic_pte(struct mm_st
 			/* don't free the page */
 			goto out;
 		}
+
+		flush_dcache_page(page);
 	} else {
 		page = *pagep;
 		*pagep = NULL;

@@ -267,6 +269,7 @@ retry:
 				err = -EFAULT;
 				goto out;
 			}
+			flush_dcache_page(page);
 			goto retry;
 		} else
 			BUG_ON(page);

All tests passing for Tegra ...

Test results for stable-v4.9:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.9.314-rc1-g0d0d580b3778
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Florian

Build results:

	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 397 pass: 397 fail: 0

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.9.314-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: 0d0d580b3778c2a438b6315b8f80b87835d1f3e1
* git describe: v4.9.313-8-g0d0d580b3778
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.313-8-g0d0d580b3778

## Test Regressions (compared to v4.9.312-67-gbc7a724ac0ce) No test regressions found.

## Metric Regressions (compared to v4.9.312-67-gbc7a724ac0ce) No metric regressions found.

## Test Fixes (compared to v4.9.312-67-gbc7a724ac0ce) No test fixes found.

## Metric Fixes (compared to v4.9.312-67-gbc7a724ac0ce) No metric fixes found.

## Test result summary
total: 64906, pass: 51271, fail: 739, skip: 11179, xfail: 1717

## Build Summary
* arm: 238 total, 238 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kselftest-zram[
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org