4.14.280-rc1 review

This is the start of the stable review cycle for the 4.14.280 release. There are 25 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 18 May 2022 19:36:02 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.280-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.280-rc1

Yang Yingliang <[email protected]>
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

Nicolas Dichtel <[email protected]>
ping: fix address binding wrt vrf

Zack Rusin <[email protected]>
drm/vmwgfx: Initialize drm_mode_fb_cmd2

Waiman Long <[email protected]>
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()

Sven Schwermer <[email protected]>
USB: serial: option: add Fibocom MA510 modem

Sven Schwermer <[email protected]>
USB: serial: option: add Fibocom L610 modem

Ethan Yang <[email protected]>
USB: serial: qcserial: add support for Sierra Wireless EM7590

Scott Chen <[email protected]>
USB: serial: pl2303: add device id for HP LM930 Display

Sergey Ryazanov <[email protected]>
usb: cdc-wdm: fix reading stuck on device close

Eric Dumazet <[email protected]>
tcp: resalt the secret every 10 seconds

Mark Brown <[email protected]>
ASoC: ops: Validate input values in snd_soc_put_volsw_range()

Mark Brown <[email protected]>
ASoC: max98090: Generate notifications on changes for custom control

Mark Brown <[email protected]>
ASoC: max98090: Reject invalid values in custom control put()

Ji-Ze Hong (Peter Hong) <[email protected]>
hwmon: (f71882fg) Fix negative temperature

Taehee Yoo <[email protected]>
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()

Guangguan Wang <[email protected]>
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending

Alexandra Winter <[email protected]>
s390/lcs: fix variable dereferenced before check

Alexandra Winter <[email protected]>
s390/ctcm: fix potential memory leak

Alexandra Winter <[email protected]>
s390/ctcm: fix variable dereferenced before check

Randy Dunlap <[email protected]>
hwmon: (ltq-cputemp) restrict it to SOC_XWAY

Johannes Berg <[email protected]>
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection

Eric Dumazet <[email protected]>
netlink: do not reset transport header in netlink_recvmsg()

Lokesh Dhoundiyal <[email protected]>
ipv4: drop dst in multicast routing path

Tariq Toukan <[email protected]>
net: Fix features skip in for_each_netdev_feature()

Sven Eckelmann <[email protected]>
batman-adv: Don't skb_split skbuffs with frag_list

-------------

Diffstat:

 Makefile                              |  4 ++--
 drivers/gpu/drm/vmwgfx/vmwgfx_fb.c    |  2 +-
 drivers/hwmon/Kconfig                 |  2 +-
 drivers/hwmon/f71882fg.c              |  5 +++--
 drivers/net/ethernet/sfc/ef10.c       |  5 +++++
 drivers/net/wireless/mac80211_hwsim.c |  3 +++
 drivers/s390/net/ctcm_mpc.c           |  6 +-----
 drivers/s390/net/ctcm_sysfs.c         |  5 +++--
 drivers/s390/net/lcs.c                |  7 ++++---
 drivers/tty/serial/digicolor-usart.c  |  2 +-
 drivers/usb/class/cdc-wdm.c           |  1 +
 drivers/usb/serial/option.c           |  4 ++++
 drivers/usb/serial/pl2303.c           |  1 +
 drivers/usb/serial/pl2303.h           |  1 +
 drivers/usb/serial/qcserial.c         |  2 ++
 include/linux/netdev_features.h       |  4 ++--
 kernel/cgroup/cpuset.c                |  7 +++++--
 net/batman-adv/fragmentation.c        | 11 +++++++++++
 net/core/secure_seq.c                 | 12 +++++++++---
 net/ipv4/ping.c                       | 12 +++++++++++-
 net/ipv4/route.c                      |  1 +
 net/netlink/af_netlink.c              |  1 -
 net/smc/smc_rx.c                      |  4 ++--
 sound/soc/codecs/max98090.c           |  5 ++++-
 sound/soc/soc-ops.c                   | 18 +++++++++++++++++-
 25 files changed, 95 insertions(+), 30 deletions(-)

From: Sven Eckelmann <[email protected]>

[ Upstream commit a063f2fba3fa633a599253b62561051ac185fa99 ]

The receiving interface might have used GRO to receive more fragments than MAX_SKB_FRAGS fragments. In this case, these will not be stored in skb_shinfo(skb)->frags but merged into the frag list.

batman-adv relies on the function skb_split to split packets up into multiple smaller packets which are not larger than the MTU on the outgoing interface. But this function cannot handle frag_list entries and is only operating on skb_shinfo(skb)->frags. If it is still trying to split such an skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST, then validate_xmit_skb() will try to linearize it. But this fails due to inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after skb_copy_bits() returns an error.

In case of entries in frag_list, just linearize the skb before operating on it with skb_split().

---
 net/batman-adv/fragmentation.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

index 4842436c55f3..a50c87329bc5 100644
@@ -489,6 +489,17 @@ int batadv_frag_send_packet(struct sk_buff *skb,
 		goto free_skb;
 	}
 
+	/* GRO might have added fragments to the fragment list instead of
+	 * frags[]. But this is not handled by skb_split and must be
+	 * linearized to avoid incorrect length information after all
+	 * batman-adv fragments were created and submitted to the
+	 * hard-interface
+	 */
+	if (skb_has_frag_list(skb) && __skb_linearize(skb)) {
+		ret = -ENOMEM;
+		goto free_skb;
+	}
+
 	/* Create one header to be copied to all fragments */
 	frag_header.packet_type = BATADV_UNICAST_FRAG;
 	frag_header.version = BATADV_COMPAT_VERSION;

2.35.1

From: Tariq Toukan <[email protected]>

[ Upstream commit 85db6352fc8a158a893151baa1716463d34a20d0 ]

The find_next_netdev_feature() macro gets the "remaining length", not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips the adjacent bit. Pass "bit" instead.

---
 include/linux/netdev_features.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index de123f436f1a..3a308bf98fc3 100644
@@ -145,7 +145,7 @@ enum {
 #define NETIF_F_HW_ESP_TX_CSUM	__NETIF_F(HW_ESP_TX_CSUM)
 #define	NETIF_F_RX_UDP_TUNNEL_PORT  __NETIF_F(RX_UDP_TUNNEL_PORT)
 
-/* Finds the next feature with the highest number of the range of start till 0.
+/* Finds the next feature with the highest number of the range of start-1 till 0.
  */
 static inline int find_next_netdev_feature(u64 feature, unsigned long start)
 {

@@ -164,7 +164,7 @@ static inline int find_next_netdev_feature(u64 feature, unsigned long start)
 	for ((bit) = find_next_netdev_feature((mask_addr),		\
 					      NETDEV_FEATURE_COUNT);	\
 	     (bit) >= 0;						\
-	     (bit) = find_next_netdev_feature((mask_addr), (bit) - 1))
+	     (bit) = find_next_netdev_feature((mask_addr), (bit)))
 
 /* Features valid for ethtool to change */
 /* = all defined minus driver/device-class-related */

2.35.1

From: Lokesh Dhoundiyal <[email protected]>

[ Upstream commit 9e6c6d17d1d6a3f1515ce399f9a011629ec79aa0 ]

kmemleak reports the following when routing multicast traffic over an ipsec tunnel.

Kmemleak output:
unreferenced object 0x8000000044bebb00 (size 256):
comm "softirq", pid 0, jiffies 4294985356 (age 126.810s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80  ..............t.
    80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f83947e0>] __kmalloc+0x1e8/0x300
    [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58
    [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8
    [<00000000824f6cf1>] gre_rcv+0x178/0x540
    [<00000000ccd4e162>] gre_rcv+0x7c/0xd8
    [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350
    [<000000006a483377>] ip_local_deliver_finish+0x54/0x68
    [<00000000d9271b3a>] ip_local_deliver+0x128/0x168
    [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8
    [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0
    [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0
    [<00000000013d7914>] irq_exit+0xc4/0xe0
    [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108
    [<000000000751eb8e>] handle_int+0x16c/0x178
    [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28

The metadata dst is leaked when ip_route_input_mc() updates the dst for the skb. Commit f38a9eb1f77b ("dst: Metadata destinations") correctly handled dropping the dst in ip_route_input_slow() but missed the multicast case which is handled by ip_route_input_mc(). Drop the dst in ip_route_input_mc() avoiding the leak.

---
 net/ipv4/route.c | 1 +
 1 file changed, 1 insertion(+)

index 34cf572cc5dc..52c4098e1deb 100644
@@ -1697,6 +1697,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 #endif
 	RT_CACHE_STAT_INC(in_slow_mc);
 
+	skb_dst_drop(skb);
 	skb_dst_set(skb, &rth->dst);
 	return 0;
 }

2.35.1

From: Eric Dumazet <[email protected]>

[ Upstream commit d5076fe4049cadef1f040eda4aaa001bb5424225 ]

netlink_recvmsg() does not need to change transport header.

If transport header was needed, it should have been reset by the producer (netlink_dump()), not the consumer(s).

The following trace probably happened when multiple threads were using MSG_PEEK.

BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg

write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:

 skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
 netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x204/0x2c0 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:

 skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
 netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
 ____sys_recvmsg+0x162/0x2f0
 ___sys_recvmsg net/socket.c:2674 [inline]
 __sys_recvmsg+0x209/0x3f0 net/socket.c:2704
 __do_sys_recvmsg net/socket.c:2714 [inline]
 __se_sys_recvmsg net/socket.c:2711 [inline]
 __x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffff -> 0x0000

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

---
 net/netlink/af_netlink.c | 1 -
 1 file changed, 1 deletion(-)

index 979cd7dff40a..1b2e99ce54e5 100644
@@ -1947,7 +1947,6 @@ static int netlink_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 		copied = len;
 	}
 
-	skb_reset_transport_header(data_skb);
 	err = skb_copy_datagram_msg(data_skb, 0, msg, copied);
 
 	if (msg->msg_name) {

2.35.1

From: Johannes Berg <[email protected]>

[ Upstream commit 9e2db50f1ef2238fc2f71c5de1c0418b7a5b0ea2 ]

This is needed since it might use (and pass out) pointers to e.g. keys protected by RCU. Can't really happen here as the frames aren't encrypted, but we need to still adhere to the rules.

---
 drivers/net/wireless/mac80211_hwsim.c | 3 +++
 1 file changed, 3 insertions(+)

index ee1eb14ae8fc..885c4352bdef 100644
@@ -2025,11 +2025,13 @@ static void hw_scan_work(struct work_struct *work)
 			if (req->ie_len)
 				skb_put_data(probe, req->ie, req->ie_len);
 
+			rcu_read_lock();
 			if (!ieee80211_tx_prepare_skb(hwsim->hw,
 						      hwsim->hw_scan_vif,
 						      probe,
 						      hwsim->tmp_chan->band,
 						      NULL)) {
+				rcu_read_unlock();
 				kfree_skb(probe);
 				continue;
 			}

@@ -2037,6 +2039,7 @@ static void hw_scan_work(struct work_struct *work)
 			local_bh_disable();
 			mac80211_hwsim_tx_frame(hwsim->hw, probe,
 						hwsim->tmp_chan);
+			rcu_read_unlock();
 			local_bh_enable();
 		}
 	}

2.35.1

From: Randy Dunlap <[email protected]>

[ Upstream commit 151d6dcbed836270c6c240932da66f147950cbdb ]

Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build errors since FALCON does not support the same features as XWAY.

Change this symbol to depend on SOC_XWAY since that provides the necessary interfaces.

Repairs these build errors:

../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable':
../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration]
23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration]
23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe':
../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function)
92 | if (ltq_soc_type() != SOC_TYPE_VR9_2)

---
 drivers/hwmon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d65431417b17..e02d7bfc4ae4 100644
@@ -793,7 +793,7 @@ config SENSORS_LTC4261
 
 config SENSORS_LTQ_CPUTEMP
 	bool "Lantiq cpu temperature sensor driver"
-	depends on LANTIQ
+	depends on SOC_XWAY
 	help
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU.

2.35.1

From: Alexandra Winter <[email protected]>

[ Upstream commit 2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ]

Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)

---
 drivers/s390/net/ctcm_sysfs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index ded1930a00b2..e3813a7aa5e6 100644
@@ -39,11 +39,12 @@ static ssize_t ctcm_buffer_write(struct device *dev,
 	struct ctcm_priv *priv = dev_get_drvdata(dev);
 	int rc;
 
-	ndev = priv->channel[CTCM_READ]->netdev;
-	if (!(priv && priv->channel[CTCM_READ] && ndev)) {
+	if (!(priv && priv->channel[CTCM_READ] &&
+	      priv->channel[CTCM_READ]->netdev)) {
 		CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, "bfnondev");
 		return -ENODEV;
 	}
+	ndev = priv->channel[CTCM_READ]->netdev;
 
 	rc = kstrtouint(buf, 0, &bs1);
 	if (rc)

2.35.1

From: Alexandra Winter <[email protected]>

[ Upstream commit 0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ]

smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'

mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in ctcmpc_unpack_skb().

---
 drivers/s390/net/ctcm_mpc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

index e02f295d38a9..07d9668137df 100644
@@ -625,8 +625,6 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 		ctcm_clear_busy_do(dev);
 	}
 
-	kfree(mpcginfo);
-
 	return;
 
 }

@@ -1205,10 +1203,10 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 						CTCM_FUNTAIL, dev->name);
 			priv->stats.rx_dropped++;
 			/* mpcginfo only used for non-data transfers */
-			kfree(mpcginfo);
 			if (do_debug_data)
 				ctcmpc_dump_skb(pskb, -8);
 		}
+		kfree(mpcginfo);
 	}
 done:
 

@@ -1991,7 +1989,6 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 		}
 		break;
 	}
-	kfree(mpcginfo);
 
 	CTCM_PR_DEBUG("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
 		__func__, ch->id, grp->outstanding_xid2,

@@ -2052,7 +2049,6 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 		mpc_validate_xid(mpcginfo);
 		break;
 	}
-	kfree(mpcginfo);
 	return;
 }
 

2.35.1

From: Alexandra Winter <[email protected]>

[ Upstream commit 671bb35c8e746439f0ed70815968f9a4f20a8deb ]

smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)

---
 drivers/s390/net/lcs.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

index d01b5c2a7760..da4d7284db67 100644
@@ -1757,10 +1757,11 @@ lcs_get_control(struct lcs_card *card, struct lcs_cmd *cmd)
 			lcs_schedule_recovery(card);
 			break;
 		case LCS_CMD_STOPLAN:
-			pr_warn("Stoplan for %s initiated by LGW\n",
-				card->dev->name);
-			if (card->dev)
+			if (card->dev) {
+				pr_warn("Stoplan for %s initiated by LGW\n",
+					card->dev->name);
 				netif_carrier_off(card->dev);
+			}
 			break;
 		default:
 			LCS_DBF_TEXT(5, trace, "noLGWcmd");

2.35.1

From: Guangguan Wang <[email protected]>

[ Upstream commit f3c46e41b32b6266cf60b0985c61748f53bf1c61 ]

Non blocking sendmsg will return -EAGAIN when any signal pending and no send space left, while non blocking recvmsg return -EINTR when signal pending and no data received. This may makes confused. As TCP returns -EAGAIN in the conditions described above. Align the behavior of smc with TCP.

---
 net/smc/smc_rx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index cbf58637ee14..0d5146d6d105 100644
@@ -145,12 +145,12 @@ int smc_rx_recvmsg(struct smc_sock *smc, struct msghdr *msg, size_t len,
 				}
 				break;
 			}
+			if (!timeo)
+				return -EAGAIN;
 			if (signal_pending(current)) {
 				read_done = sock_intr_errno(timeo);
 				break;
 			}
-			if (!timeo)
-				return -EAGAIN;
 		}
 
 		if (!atomic_read(&conn->bytes_to_rcv)) {

2.35.1

From: Taehee Yoo <[email protected]>

[ Upstream commit 1fa89ffbc04545b7582518e57f4b63e2a062870f ]

In the NIC ->probe() callback, ->mtd_probe() callback is called. If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too. In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().

kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
    [<ffffffffa3873f0e>] __kmalloc+0x20e/0x250
    [<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
    [<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
    [<ffffffffa414192c>] local_pci_probe+0xdc/0x170
    [<ffffffffa4145df5>] pci_device_probe+0x235/0x680
    [<ffffffffa443dd52>] really_probe+0x1c2/0x8f0
    [<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
    [<ffffffffa443e92a>] driver_probe_device+0x4a/0x120
    [<ffffffffa443f2ae>] __driver_attach+0x16e/0x320
    [<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
    [<ffffffffa443b75e>] bus_add_driver+0x39e/0x560
    [<ffffffffa4440b1e>] driver_register+0x18e/0x310
    [<ffffffffc02e2055>] 0xffffffffc02e2055
    [<ffffffffa3001af3>] do_one_initcall+0xc3/0x450
    [<ffffffffa33ca574>] do_init_module+0x1b4/0x700

---
 drivers/net/ethernet/sfc/ef10.c | 5 +++++
 1 file changed, 5 insertions(+)

index 2d92a9fe4606..4f0da3963b01 100644
@@ -5956,6 +5956,11 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)
 		n_parts++;
 	}
 
+	if (!n_parts) {
+		kfree(parts);
+		return 0;
+	}
+
 	rc = efx_mtd_add(efx, &parts[0].common, n_parts, sizeof(*parts));
 fail:
 	if (rc)

2.35.1

From: Ji-Ze Hong (Peter Hong) <[email protected]>

[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]

All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement.

In show_temp()

	temp = data->temp[nr] * 1000;

When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to:

	temp = ((s8)data->temp[nr]) * 1000;

---
 drivers/hwmon/f71882fg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index ca54ce5c8e10..4010b61743f5 100644
@@ -1590,8 +1590,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 		temp *= 125;
 		if (sign)
 			temp -= 128000;
-	} else
-		temp = data->temp[nr] * 1000;
+	} else {
+		temp = ((s8)data->temp[nr]) * 1000;
+	}
 
 	return sprintf(buf, "%d\n", temp);
 }

2.35.1

From: Mark Brown <[email protected]>

[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written.

---
 sound/soc/codecs/max98090.c | 3 +++
 1 file changed, 3 insertions(+)

index 3fe09828745a..a25183f6fba6 100644
@@ -419,6 +419,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 
 	val = (val >> mc->shift) & mask;
 
+	if (sel < 0 || sel > mc->max)
+		return -EINVAL;
+
 	*select = sel;
 
 	/* Setting a volume is only valid if it is already On */

2.35.1

From: Mark Brown <[email protected]>

[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that.

---
 sound/soc/codecs/max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index a25183f6fba6..362d1fb2aae9 100644
@@ -436,7 +436,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 		mask << mc->shift,
 		sel << mc->shift);
 
-	return 0;
+	return *select != val;
 }
 
 static const char *max98090_perf_pwr_text[] =

2.35.1

From: Mark Brown <[email protected]>

[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware.

---
 sound/soc/soc-ops.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

index d6d72595fbd0..0848aec1bd24 100644
@@ -528,7 +528,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int err, ret;
+	int err, ret, tmp;
+
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp < 0)
+		return -EINVAL;
+	if (mc->platform_max && tmp > mc->platform_max)
+		return -EINVAL;
+	if (tmp > mc->max - mc->min + 1)
+		return -EINVAL;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;

@@ -543,6 +551,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		tmp = ucontrol->value.integer.value[1];
+		if (tmp < 0)
+			return -EINVAL;
+		if (mc->platform_max && tmp > mc->platform_max)
+			return -EINVAL;
+		if (tmp > mc->max - mc->min + 1)
+			return -EINVAL;
+
 		if (invert)
 			val = (max - ucontrol->value.integer.value[1]) & mask;
 		else

2.35.1

From: Eric Dumazet <[email protected]>

[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ]

In order to limit the ability for an observer to recognize the source ports sequence used to contact a set of destinations, we should periodically shuffle the secret. 10 seconds looks effective enough without causing particular issues.

---
 net/core/secure_seq.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

index 7232274de334..17683aea8a35 100644
@@ -22,6 +22,8 @@
 static siphash_key_t net_secret __read_mostly;
 static siphash_key_t ts_secret __read_mostly;
 
+#define EPHEMERAL_PORT_SHUFFLE_PERIOD (10 * HZ)
+
 static __always_inline void net_secret_init(void)
 {
 	net_get_random_once(&net_secret, sizeof(net_secret));

@@ -100,11 +102,13 @@ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 	const struct {
 		struct in6_addr saddr;
 		struct in6_addr daddr;
+		unsigned int timeseed;
 		__be16 dport;
 	} __aligned(SIPHASH_ALIGNMENT) combined = {
 		.saddr = *(struct in6_addr *)saddr,
 		.daddr = *(struct in6_addr *)daddr,
-		.dport = dport
+		.timeseed = jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD,
+		.dport = dport,
 	};
 	net_secret_init();
 	return siphash(&combined, offsetofend(typeof(combined), dport),

@@ -144,8 +148,10 @@ u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
 u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
 	net_secret_init();
-	return siphash_3u32((__force u32)saddr, (__force u32)daddr,
-			    (__force u16)dport, &net_secret);
+	return siphash_4u32((__force u32)saddr, (__force u32)daddr,
+			    (__force u16)dport,
+			    jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD,
+			    &net_secret);
 }
 EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 #endif

2.35.1

From: Sergey Ryazanov <[email protected]>

commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream.

cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched.

So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached.

This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection.

Fix this issue by clearing the WDM_RESPONDING flag on the device file close.

Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues.

---
 drivers/usb/class/cdc-wdm.c |    1 +
 1 file changed, 1 insertion(+)

@@ -731,6 +731,7 @@ static int wdm_release(struct inode *ino
 			kill_urbs(desc);
 			spin_lock_irq(&desc->iuspin);
 			desc->resp_count = 0;
+			clear_bit(WDM_RESPONDING, &desc->flags);
 			spin_unlock_irq(&desc->iuspin);
 			desc->manage_power(desc->intf, 0);
 		} else {

From: Scott Chen <[email protected]>

commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream.

Add the device id for the HPLM930Display which is a PL2303GC based device.

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    1 +
 2 files changed, 2 insertions(+)

@@ -103,6 +103,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },

@@ -134,6 +134,7 @@
 #define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39
 #define HP_LD381_PRODUCT_ID	0x0f7f
+#define HP_LM930_PRODUCT_ID	0x0f9b
 #define HP_LCM220_PRODUCT_ID	0x3139
 #define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524

From: Ethan Yang <[email protected]>

commit 870b1eee2d844727b06e238c121d260bc5645580 upstream.

Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.

---
 drivers/usb/serial/qcserial.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -170,6 +170,8 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x1199, 0x9090)},	/* Sierra Wireless EM7565 QDL */
 	{DEVICE_SWI(0x1199, 0x9091)},	/* Sierra Wireless EM7565 */
 	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
+	{DEVICE_SWI(0x1199, 0xc080)},	/* Sierra Wireless EM7590 QDL */
+	{DEVICE_SWI(0x1199, 0xc081)},	/* Sierra Wireless EM7590 */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */

From: Sven Schwermer <[email protected]>

commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.

The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively:

31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 31
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d10 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 33
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610

C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host

E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -2125,6 +2125,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) },			/* Fibocom L610 (ECM/RNDIS mode) */
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */

From: Sven Schwermer <[email protected]>

commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.

The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively:

30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM

The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration.

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 30
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=90b2 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 31
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0106 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------

T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=010a Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -2131,6 +2131,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0106, 0xff) },			/* Fibocom MA510 (ECM mode w/ diag intf.) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */

From: Waiman Long <[email protected]>

commit 2685027fca387b602ae565bff17895188b803988 upstream.

There are 3 places where the cpu and node masks of the top cpuset can be initialized in the order they are executed:
1) start_kernel -> cpuset_init()
2) start_kernel -> cgroup_init() -> cpuset_bind()
3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()

The first cpuset_init() call just sets all the bits in the masks. The second cpuset_bind() call sets cpus_allowed and mems_allowed to the default v2 values. The third cpuset_init_smp() call sets them back to v1 values.

For systems with cgroup v2 setup, cpuset_bind() is called once. As a result, cpu and memory node hot add may fail to update the cpu and node masks of the top cpuset to include the newly added cpu or node in a cgroup v2 environment.

For systems with cgroup v1 setup, cpuset_bind() is called again by rebind_subsystem() when the v1 cpuset filesystem is mounted as shown in the dmesg log below with an instrumented kernel.

  [    2.609781] cpuset_bind() called - v2 = 1
  [    3.079473] cpuset_init_smp() called
  [    7.103710] cpuset_bind() called - v2 = 0

smp_init() is called after the first two init functions. So we don't have a complete list of active cpus and memory nodes until later in cpuset_init_smp() which is the right time to set up effective_cpus and effective_mems.

To fix this cgroup v2 mask setup problem, the potentially incorrect cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed. For cgroup v2 systems, the initial cpuset_bind() call will set the masks correctly. For cgroup v1 systems, the second call to cpuset_bind() will do the right setup.

---
 kernel/cgroup/cpuset.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -2403,8 +2403,11 @@ static struct notifier_block cpuset_trac
  */
 void __init cpuset_init_smp(void)
 {
-	cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
-	top_cpuset.mems_allowed = node_states[N_MEMORY];
+	/*
+	 * cpus_allowd/mems_allowed set to v2 values in the initial
+	 * cpuset_bind() call will be reset to v1 values in another
+	 * cpuset_bind() call when v1 cpuset is mounted.
+	 */
 	top_cpuset.old_mems_allowed = top_cpuset.mems_allowed;
 
 	cpumask_copy(top_cpuset.effective_cpus, cpu_active_mask);

From: Zack Rusin <[email protected]>

commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream.

Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon.

Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up.

---
 drivers/gpu/drm/vmwgfx/vmwgfx_fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -522,7 +522,7 @@ static int vmw_fb_kms_detach(struct vmw_
 
 static int vmw_fb_kms_framebuffer(struct fb_info *info)
 {
-	struct drm_mode_fb_cmd2 mode_cmd;
+	struct drm_mode_fb_cmd2 mode_cmd = {0};
 	struct vmw_fb_par *par = info->par;
 	struct fb_var_screeninfo *var = &info->var;
 	struct drm_framebuffer *cur_fb;

From: Nicolas Dichtel <[email protected]>

commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream.

When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite.

Before the patch:

$ sysctl -w net.ipv4.ping_group_range='0  2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address

---
 net/ipv4/ping.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

@@ -309,6 +309,7 @@ static int ping_check_bind_addr(struct s
 	struct net *net = sock_net(sk);
 	if (sk->sk_family == AF_INET) {
 		struct sockaddr_in *addr = (struct sockaddr_in *) uaddr;
+		u32 tb_id = RT_TABLE_LOCAL;
 		int chk_addr_ret;
 
 		if (addr_len < sizeof(*addr))

@@ -322,7 +323,8 @@ static int ping_check_bind_addr(struct s
 		pr_debug("ping_check_bind_addr(sk=%p,addr=%pI4,port=%d)\n",
 			 sk, &addr->sin_addr.s_addr, ntohs(addr->sin_port));
 
-		chk_addr_ret = inet_addr_type(net, addr->sin_addr.s_addr);
+		tb_id = l3mdev_fib_table_by_index(net, sk->sk_bound_dev_if) ? : tb_id;
+		chk_addr_ret = inet_addr_type_table(net, addr->sin_addr.s_addr, tb_id);
 
 		if (addr->sin_addr.s_addr == htonl(INADDR_ANY))
 			chk_addr_ret = RTN_LOCAL;

@@ -362,6 +364,14 @@ static int ping_check_bind_addr(struct s
 			if (!dev) {
 				rcu_read_unlock();
 				return -ENODEV;
+			}
+		}
+
+		if (!dev && sk->sk_bound_dev_if) {
+			dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
+			if (!dev) {
+				rcu_read_unlock();
+				return -ENODEV;
 			}
 		}
 		has_addr = pingv6_ops.ipv6_chk_addr(net, &addr->sin6_addr, dev,

From: Yang Yingliang <[email protected]>

commit 447ee1516f19f534a228dda237eddb202f23e163 upstream.

It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

---
 drivers/tty/serial/digicolor-usart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -476,10 +476,10 @@ static int digicolor_uart_probe(struct p
 		return PTR_ERR(uart_clk);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dp->port.mapbase = res->start;
 	dp->port.membase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(dp->port.membase))
 		return PTR_ERR(dp->port.membase);
+	dp->port.mapbase = res->start;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)

All tests passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.280-rc1-g371779ee7c34
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Build results:

	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 424 pass: 424 fail: 0

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.14.280-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.14.y
* git commit: 371779ee7c349696d0848d670711e87d44903fe1
* git describe: v4.14.279-26-g371779ee7c34
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.279-26-g371779ee7c34

## Test Regressions (compared to v4.14.278-15-g4477341b2b19) No test regressions found.

## Metric Regressions (compared to v4.14.278-15-g4477341b2b19) No metric regressions found.

## Test Fixes (compared to v4.14.278-15-g4477341b2b19) No test fixes found.

## Metric Fixes (compared to v4.14.278-15-g4477341b2b19) No metric fixes found.

## Test result summary
total: 79237, pass: 62537, fail: 1123, skip: 13203, xfail: 2374

## Build Summary
* arm: 270 total, 270 passed, 0 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* powerpc: 16 total, 16 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 34 total, 34 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org