Skip to contentSkip to conversation

common/cnxk: dump hardware flow MCAM entry data

PATCH In review [email protected] 2 participants 2 messages May 17, 2022 – Jun 14, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 common/cnxk: dump hardware flow MCAM entry data

From: Satheesh Paul <[email protected]>

When dumping flow data, read hardware MCAM entry corresponding to the flow and print that data also.

---
 drivers/common/cnxk/roc_npc_mcam_dump.c | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
drivers/common/cnxk/roc_npc_mcam_dump.c +25 -1
index 679e3d7657..2aaf3ccd0b 100644
@@ -586,8 +586,10 @@ roc_npc_flow_mcam_dump(FILE *file, struct roc_npc *roc_npc,
 		       struct roc_npc_flow *flow)
 {
 	struct npc *npc = roc_npc_to_npc_priv(roc_npc);
+	struct npc_mcam_read_entry_req *mcam_read_req;
+	struct npc_mcam_read_entry_rsp *mcam_read_rsp;
 	bool is_rx = 0;
-	int i;
+	int i, rc = 0;
 
 	fprintf(file, "MCAM Index:%d\n", flow->mcam_id);
 	fprintf(file, "Interface :%s (%d)\n", intf_str[flow->nix_intf],
@@ -609,5 +611,27 @@ roc_npc_flow_mcam_dump(FILE *file, struct roc_npc *roc_npc,
 		fprintf(file, "\tDW%d_Mask:%016lX\n", i, flow->mcam_mask[i]);
 	}
 
+	mcam_read_req = mbox_alloc_msg_npc_mcam_read_entry(npc->mbox);
+	if (mcam_read_req == NULL) {
+		plt_err("Failed to alloc msg");
+		return;
+	}
+
+	mcam_read_req->entry = flow->mcam_id;
+	rc = mbox_process_msg(npc->mbox, (void *)&mcam_read_rsp);
+	if (rc) {
+		plt_err("Failed to fetch MCAM entry");
+		return;
+	}
+
+	fprintf(file, "HW MCAM Data :\n");
+
+	for (i = 0; i < ROC_NPC_MAX_MCAM_WIDTH_DWORDS; i++) {
+		fprintf(file, "\tDW%d     :%016lX\n", i,
+			mcam_read_rsp->entry_data.kw[i]);
+		fprintf(file, "\tDW%d_Mask:%016lX\n", i,
+			mcam_read_rsp->entry_data.kw_mask[i]);
+	}
+
 	fprintf(file, "\n");
 }
Signature · 1 line
2.25.4
Reviewed-by Kiran Kumar K on v1 1/1
#1 lore raw
Quoted 8 lines · On Tue, May 17, 2022 at 9:34 AM <[email protected]> wrote:

From: Satheesh Paul <[email protected]>

When dumping flow data, read hardware MCAM entry corresponding to the flow and print that data also.

Updated the git commit as follows and applied to
dpdk-next-net-eventdev/for-main. Thanks

common/cnxk: support dumping flow MCAM entry data

When dumping flow data, read hardware MCAM entry corresponding to the flow and print that data also.

Quoted 51 lines
---
 drivers/common/cnxk/roc_npc_mcam_dump.c | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
drivers/common/cnxk/roc_npc_mcam_dump.c +25 -2
index 679e3d7657..2aaf3ccd0b 100644
@@ -586,8 +586,10 @@ roc_npc_flow_mcam_dump(FILE *file, struct roc_npc *roc_npc,
                       struct roc_npc_flow *flow)
 {
        struct npc *npc = roc_npc_to_npc_priv(roc_npc);
+       struct npc_mcam_read_entry_req *mcam_read_req;
+       struct npc_mcam_read_entry_rsp *mcam_read_rsp;
        bool is_rx = 0;
-       int i;
+       int i, rc = 0;
 
        fprintf(file, "MCAM Index:%d\n", flow->mcam_id);
        fprintf(file, "Interface :%s (%d)\n", intf_str[flow->nix_intf],
@@ -609,5 +611,27 @@ roc_npc_flow_mcam_dump(FILE *file, struct roc_npc *roc_npc,
                fprintf(file, "\tDW%d_Mask:%016lX\n", i, flow->mcam_mask[i]);
        }
 
+       mcam_read_req = mbox_alloc_msg_npc_mcam_read_entry(npc->mbox);
+       if (mcam_read_req == NULL) {
+               plt_err("Failed to alloc msg");
+               return;
+       }
+
+       mcam_read_req->entry = flow->mcam_id;
+       rc = mbox_process_msg(npc->mbox, (void *)&mcam_read_rsp);
+       if (rc) {
+               plt_err("Failed to fetch MCAM entry");
+               return;
+       }
+
+       fprintf(file, "HW MCAM Data :\n");
+
+       for (i = 0; i < ROC_NPC_MAX_MCAM_WIDTH_DWORDS; i++) {
+               fprintf(file, "\tDW%d     :%016lX\n", i,
+                       mcam_read_rsp->entry_data.kw[i]);
+               fprintf(file, "\tDW%d_Mask:%016lX\n", i,
+                       mcam_read_rsp->entry_data.kw_mask[i]);
+       }
+
        fprintf(file, "\n");
 }
--

2.25.4