thermal: k3_j72xx_bandgap: Add the bandgap driver support
Subsystems (2)
v9 cover thermal: k3_j72xx_bandgap: Add the bandgap driver support
Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The series also incorporates workaround for Errata i2128.
Changes in v9:
* Fixed indentation in DT binding documentation
* Added Rob's Reviewed-by
Changes in v8:
* Removed redundant items from compatible in the Documentation patch
Changes in v7:
* Separated the DT patches from this series.
* Fixed description of reg property in the DT documentation patch.
Changes in v6:
* Fixed the DT comments that were missed in v5.
* Changed the offsets, bit masks to 2-D array.
* Clean up
Changes in v5:
* Simplified the computation of the table.
* Removed unnecessary members in the structures.
Changes in v4:
* Fixed compilation warning with W=1.
Changes in v3:
* Removed static look up tables & added functions to dynamically generate them.
Changes in v2:
* Fixed DT binding errors.
Keerthy (2):
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal: k3_j72xx_bandgap: Add the bandgap driver support
.../bindings/thermal/ti,j72xx-thermal.yaml | 63 ++ drivers/thermal/Makefile | 2 +- drivers/thermal/k3_j72xx_bandgap.c | 566 ++++++++++++++++++ 3 files changed, 630 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
Signature · 1 line
2.17.1
PATCH v9 1/2 dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
--- .../bindings/thermal/ti,j72xx-thermal.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +63 -0
@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + items: + - description: VTM cfg1 register space + - description: VTM cfg2 register space + - description: VTM efuse register space + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: thermal-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 1 line
2.17.1
Re: [PATCH v9 1/2] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Hi Krzysztof,
I would like to pick this series, does the DT bindings have your blessing ?
Quoted 85 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>Reviewed-by Rob Herring <[email protected]>--- .../bindings/thermal/ti,j72xx-thermal.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+)create mode 100644
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +63
-0@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + items: + - description: VTM cfg1 register space + - description: VTM cfg2 register space + - description: VTM efuse register space + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: thermal-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Krzysztof Kozlowski
Reviewed-byRe: [PATCH v9 1/2] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Quoted 4 lines · Daniel Lezcano
Hi Krzysztof,
I would like to pick this series, does the DT bindings have your blessing ?
Best regards,
Krzysztof
Re: [PATCH v9 1/2] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Quoted 8 lines · Krzysztof Kozlowski
Quoted 4 lines · Daniel Lezcano
Hi Krzysztof,
I would like to pick this series, does the DT bindings have your blessing ?
Reviewed-by Krzysztof Kozlowski <[email protected]>
Thanks!
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
[thermal: thermal/next] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
In reply to KeerthyThe following commit has been merged into the thermal/next branch of thermal:
The following commit has been merged into the thermal/next branch of thermal:
Commit-ID: 031c2952d1588d47829da3639eaaa5e35ffe4e6e Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//031c2952d1588d47829da3639eaaa5e35ffe4e6e Author: Keerthy <[email protected]> AuthorDate: Tue, 17 May 2022 22:59:19 +05:30 Committer: Daniel Lezcano <[email protected]> CommitterDate: Thu, 19 May 2022 12:11:53 +02:00
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
--- Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +63 -0
@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + items: + - description: VTM cfg1 register space + - description: VTM cfg2 register space + - description: VTM efuse register space + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: thermal-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
PATCH v9 2/2 thermal: k3_j72xx_bandgap: Add the bandgap driver support
In reply to KeerthyAdd VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values.
It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis.
-40C to 30C
30C to 125C
125C to 150C
With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC.
Tested temperature reading on J721e SoC & J7200 SoC.
--- drivers/thermal/Makefile | 2 +- drivers/thermal/k3_j72xx_bandgap.c | 566 +++++++++++++++++++++++++++++ 2 files changed, 567 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
drivers/thermal/Makefile +1 -1
@@ -28,7 +28,7 @@ thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o -obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o k3_j72xx_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
drivers/thermal/k3_j72xx_bandgap.c new file +566 -0
566 lines not on this page · raw message
Signature · 1 line
2.17.1
The following commit has been merged into the thermal/next branch of thermal:
The following commit has been merged into the thermal/next branch of thermal:
Commit-ID: ffcb2fc86eb7ebc9f5524525fb57e1cccfbd1fc0 Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//ffcb2fc86eb7ebc9f5524525fb57e1cccfbd1fc0 Author: Keerthy <[email protected]> AuthorDate: Tue, 17 May 2022 22:59:20 +05:30 Committer: Daniel Lezcano <[email protected]> CommitterDate: Thu, 19 May 2022 12:11:53 +02:00
thermal: k3_j72xx_bandgap: Add the bandgap driver support
Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values.
It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis.
-40C to 30C
30C to 125C
125C to 150C
With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC.
Tested temperature reading on J721e SoC & J7200 SoC.
[[email protected]: Generate look-up tables run-time]
--- drivers/thermal/Makefile | 2 +- drivers/thermal/k3_j72xx_bandgap.c | 566 ++++++++++++++++++++++++++++- 2 files changed, 567 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
drivers/thermal/Makefile +1 -1
@@ -28,7 +28,7 @@ thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o -obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o k3_j72xx_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
drivers/thermal/k3_j72xx_bandgap.c new file +566 -0
566 lines not on this page · raw message