usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery
Subsystems (2)
PATCH 1/1 usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery
From: Fabio Estevam <[email protected]>
The imx6q arm2 board support has been removed from U-Boot as it did not get converted to DM.
Remove the MX6Q_ARM2 related ifdefery in the driver.
--- drivers/usb/host/ehci-mx6.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/usb/host/ehci-mx6.c +0 -5
@@ -272,12 +272,7 @@ static void usb_oc_config(struct usbnc_regs *usbnc, int index) {void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); -#if CONFIG_MACH_TYPE ==MACH_TYPE_MX6Q_ARM2 -/* mx6qarm2 seems to required a different setting*/ -clrbits_le32 (ctrl,UCTRL_OVER_CUR_POL ); -#else setbits_le32 (ctrl,UCTRL_OVER_CUR_POL ); -#endif setbits_le32 (ctrl,UCTRL_OVER_CUR_DIS );
Signature · 1 line
2.25.1
Hi Fabio
Quoted 18 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
The imx6q arm2 board support has been removed from U-Boot as it did not get converted to DM.
Remove the
MX6Q_ARM2related ifdefery in the driver.Signed-off-by Fabio Estevam <[email protected]>--- drivers/usb/host/ehci-mx6.c | 5 ----- 1 file changed, 5 deletions(-)drivers/usb/host/ehci-mx6.c +0
-0
drivers/usb/host/ehci-mx6.c static void usb_oc_config(struct usbnc_regs *usbnc, int index) · line 276
Quoted 10 lines
drivers/usb/host/ehci-mx6.c +0
-5@@ -272,12 +272,7 @@ static void usb_oc_config(struct usbnc_regs *usbnc, int index) {void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); -#if CONFIG_MACH_TYPE ==MACH_TYPE_MX6Q_ARM2 -/* mx6qarm2 seems to required a different setting*/ -clrbits_le32 (ctrl,UCTRL_OVER_CUR_POL ); -#else setbits_le32 (ctrl,UCTRL_OVER_CUR_POL ); -#endif
Is this supported by linux as dts property? If so can you just convert it and drop the define?
Michael
Quoted 6 lines
drivers/usb/host/ehci-mx6.c +0
-1setbits_le32 (ctrl,UCTRL_OVER_CUR_DIS ); --2.25.1
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
www.amarulasolutions.com
PATCH 1/1 usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery
In reply to Fabio EstevamQuoted 5 lines
From: Fabio Estevam <[email protected]>
The imx6q arm2 board support has been removed from U-Boot as it did not get converted to DM.
Remove theMX6Q_ARM2related ifdefery in the driver.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================