pmic: pca9450: Add upstream regulators subnode match
PATCH v3 1/2 pmic: pca9450: Add upstream regulators subnode match
The upstream DT regulators node subnodes are named BUCKn and LDOn, the downstream DT regulators node subnodes are named buckn and ldon, add the upstream match.
---
V2: Add RB by Fabio
V3: No change
--- drivers/power/pmic/pca9450.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/power/pmic/pca9450.c +2 -0
@@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;static const struct pmic_child_info pmic_children_info[] = {/* buck */ { .prefix ="b" , .driver =PCA9450_REGULATOR_DRIVER }, + { .prefix ="B" , .driver =PCA9450_REGULATOR_DRIVER },/* ldo */ { .prefix ="l" , .driver =PCA9450_REGULATOR_DRIVER }, + { .prefix ="L" , .driver =PCA9450_REGULATOR_DRIVER }, { }, };
Signature · 1 line
2.35.1
PATCH v3 2/2 pmic: pca9450: Add regulator driver
Add PCA9450 regulator driver. This is complementary driver for the BUCKn and LDOn regulators provided by the PCA9450 PMIC driver. Currently the driver permits reading the settngs and configuring the BUCKn and LDOn regulators.
---
V2: Add RB by Fabio
V3: Rename DVS_BUCK_RUN_MASK to PCA9450_DVS_BUCK_RUN_MASK
--- drivers/power/pmic/pca9450.c | 6 +- drivers/power/regulator/Kconfig | 15 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/pca9450.c | 333 ++++++++++++++++++++++++++++++ include/power/pca9450.h | 11 + 5 files changed, 363 insertions(+), 3 deletions(-) create mode 100644 drivers/power/regulator/pca9450.c
drivers/power/pmic/pca9450.c +3 -3
@@ -83,9 +83,9 @@ static struct dm_pmic_ops pca9450_ops = { };static const struct udevice_id pca9450_ids[] = { - { .compatible ="nxp,pca9450a" , .data =0x25 , }, - { .compatible ="nxp,pca9450b" , .data =0x25 , }, - { .compatible ="nxp,pca9450c" , .data =0x25 , }, + { .compatible ="nxp,pca9450a" , .data =NXP_CHIP_TYPE_PCA9450A , }, + { .compatible ="nxp,pca9450b" , .data =NXP_CHIP_TYPE_PCA9450BC , }, + { .compatible ="nxp,pca9450c" , .data =NXP_CHIP_TYPE_PCA9450BC , }, { } };
drivers/power/regulator/Kconfig +15 -0
@@ -60,6 +60,21 @@ config SPL_DM_REGULATOR_BD71837 This config enables implementation of driver-model regulator uclass features for regulators on ROHM BD71837 and BD71847 in SPL. +config DM_REGULATOR_PCA9450 + bool "Enable Driver Model for NXP PCA9450 regulators" + depends on DM_REGULATOR && DM_PMIC_PCA9450 + help + This config enables implementation of driver-model regulator uclass + features for regulators on NXP PCA9450 PMICs. PCA9450 contains 6 bucks + and 5 LDOS. The driver implements get/set api for value and enable. + +config SPL_DM_REGULATOR_PCA9450 + bool "Enable Driver Model for NXP PCA9450 regulators in SPL" + depends on DM_REGULATOR_PCA9450 + help + This config enables implementation of driver-model regulator uclass + features for regulators on ROHM PCA9450 in SPL. + config DM_REGULATOR_DA9063 bool "Enable Driver Model for REGULATOR DA9063" depends on DM_REGULATOR && DM_PMIC_DA9063
drivers/power/regulator/Makefile +1 -0
@@ -11,6 +11,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o +obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
drivers/power/regulator/pca9450.c new file +333 -0
333 lines not on this page · raw message
include/power/pca9450.h +11 -0
@@ -56,4 +56,15 @@ enum {int power_pca9450_init (unsigned char bus,unsigned char addr); +enum { +NXP_CHIP_TYPE_PCA9450A =0 , +NXP_CHIP_TYPE_PCA9450BC , +NXP_CHIP_TYPE_AMOUNT +}; + +#define PCA9450_DVS_BUCK_RUN_MASK 0x7f +#define PCA9450_LDO12_MASK 0x07 +#define PCA9450_LDO34_MASK 0x1f +#define PCA9450_LDO5_MASK 0x0f +#endif
Signature · 1 line
2.35.1
PATCH v3 2/2 pmic: pca9450: Add regulator driver
Quoted 9 lines
Add PCA9450 regulator driver. This is complementary driver for the BUCKn and LDOn regulators provided by the PCA9450 PMIC driver. Currently the driver permits reading the settngs and configuring the BUCKn and LDOn regulators.
Reviewed-by Fabio Estevam <[email protected]>Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Stefano Babic <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v3 1/2 pmic: pca9450: Add upstream regulators subnode match
In reply to Marek VasutQuoted 8 lines
The upstream DT regulators node subnodes are named BUCKn and LDOn, the downstream DT regulators node subnodes are named buckn and ldon, add the upstream match.
Reviewed-by Fabio Estevam <[email protected]>Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Stefano Babic <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================