doc: update matching versions in i40e guide
PATCH 1/1 doc: update matching versions in i40e guide
Add recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03.
--- doc/guides/nics/i40e.rst | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
doc/guides/nics/i40e.rst +16 -0
@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |
@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.15 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.15 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |
Signature · 1 line
2.17.1
PATCH v2 1/1 doc: update matching versions in i40e guide
Add recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
---
v2:
* added known issue in FW 8.4+
--- doc/guides/nics/i40e.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
doc/guides/nics/i40e.rst +23 -0
@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |
@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.15 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.15 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |
@@ -771,6 +787,13 @@ it will fail and return the info "Conflict with the first rule's input set", which means the current rule's input set conflicts with the first rule's. Remove the first rule if want to change the input set of the PCTYPE. +PF reset fail after QinQ set with FW >= 8.4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If upgrade FW to a version higher than 8.4, after set MAC VLAN filter and configure outer VLAN on PF, kill +DPDK process will cause the card crash. + + Example of getting best performance with l3fwd example ------------------------------------------------------
Signature · 1 line
2.17.1
PATCH v3 1/1 doc: update matching versions in i40e guide
In reply to Qiming YangAdd recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
---
v2:
* added known issue in FW 8.4+
v3:
* updated x722 FW version
--- doc/guides/nics/i40e.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
doc/guides/nics/i40e.rst +23 -0
@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |
@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |
@@ -771,6 +787,13 @@ it will fail and return the info "Conflict with the first rule's input set", which means the current rule's input set conflicts with the first rule's. Remove the first rule if want to change the input set of the PCTYPE. +PF reset fail after QinQ set with FW >= 8.4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If upgrade FW to a version higher than 8.4, after set MAC VLAN filter and configure outer VLAN on PF, kill +DPDK process will cause the card crash. + + Example of getting best performance with l3fwd example ------------------------------------------------------
Signature · 1 line
2.17.1
Quoted 4 lines · Qiming Yang
Add recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
Just a minor thing on the wording, 'version higher than 8.4' suggests that 8.4 is not impacted by this known issue.
If 8.4 is impacted then it would be better to say
'version 8.4 and higher.'
Quoted 47 lines
Signed-off-by Qiming Yang <[email protected]>---
v2:
* added known issue in FW 8.4+
v3:
* updated x722 FW version--- doc/guides/nics/i40e.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)doc/guides/nics/i40e.rst +16
-0@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |
doc/guides/nics/i40e.rst it will fail and return the info "Conflict with the first rule's input set", · line 794
Quoted 8 lines
doc/guides/nics/i40e.rst +5
-0@@ -771,6 +787,13 @@ it will fail and return the info "Conflict with the first rule's input set", which means the current rule's input set conflicts with the first rule's. Remove the first rule if want to change the input set of the PCTYPE. +PF reset fail after QinQ set with FW >= 8.4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If upgrade FW to a version higher than 8.4, after set MAC VLAN filter and configure outer VLAN on PF, kill +DPDK process will cause the card crash.
s/version higher than 8.4/version 8.4 and higher/
Quoted 5 lines
doc/guides/nics/i40e.rst +2
-0+ + Example of getting best performance with l3fwd example ------------------------------------------------------
Hi,
Quoted 13 lines
-----Original Message-----
From: Kevin Traynor <[email protected]>
Sent: 2022年5月16日 18:30
To: Yang, Qiming <[email protected]>; [email protected]
Cc: Zhang, Qi Z <[email protected]>; [email protected]
Subject: Re: [PATCH v3] doc: update matching versions in i40e guideQuoted 4 lines · Qiming Yang
Add recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
Quoted 4 lines
Just a minor thing on the wording, 'version higher than 8.4' suggests that 8.4 is not impacted by this known issue.
If 8.4 is impacted then it would be better to say 'version 8.4 and higher.'
Thank you for your remind, 8.4 is also impacted, I'll modify this express in v4
Quoted 66 lines
doc/guides/nics/i40e.rst it will fail and return the info "Conflict with the
Quoted 48 lines
Signed-off-by Qiming Yang <[email protected]>---
v2:
* added known issue in FW 8.4+
v3:
* updated x722 FW version--- doc/guides/nics/i40e.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)doc/guides/nics/i40e.rst index renamed from doc/guides/nics/i40e.rst +0
-0
ef91b3a1ac..11e0901c56100644doc/guides/nics/i40e.rst +16
-0@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |@@ -771,6 +787,13 @@ it will fail and return the info "Conflict with thefirst rule's input set",
doc/guides/nics/i40e.rst it will fail and return the info "Conflict with the first rule's input set",
Quoted 8 lines
doc/guides/nics/i40e.rst +5
-0which means the current rule's input set conflicts with the first rule's. Remove the first rule if want to change the input set of the PCTYPE. +PF reset fail after QinQ set with FW >= 8.4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If upgrade FW to a version higher than 8.4, after set MAC VLAN filter +and configure outer VLAN on PF, kill DPDK process will cause the cardcrash.
s/version higher than 8.4/version 8.4 and higher/
Quoted 5 lines
doc/guides/nics/i40e.rst +2
-0+ + Example of getting best performance with l3fwd example ------------------------------------------------------
PATCH v4 1/1 doc: update matching versions in i40e guide
In reply to Qiming YangAdd recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
---
v2:
* added known issue in FW 8.4+
v3:
* updated x722 FW version
v4:
* minor express change
--- doc/guides/nics/i40e.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
doc/guides/nics/i40e.rst +23 -0
@@ -101,6 +101,14 @@ For X710/XL710/XXV710, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 8.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 8.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.14.13 | 8.00 |
@@ -148,6 +156,14 @@ For X722, +--------------+-----------------------+------------------+ | DPDK version | Kernel driver version | Firmware version | +==============+=======================+==================+ + | 22.03 | 2.17.15 | 5.50 | + +--------------+-----------------------+------------------+ + | 21.11 | 2.17.4 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.08 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ + | 21.05 | 2.15.9 | 5.30 | + +--------------+-----------------------+------------------+ | 21.02 | 2.14.13 | 5.00 | +--------------+-----------------------+------------------+ | 20.11 | 2.13.10 | 5.00 |
@@ -771,6 +787,13 @@ it will fail and return the info "Conflict with the first rule's input set", which means the current rule's input set conflicts with the first rule's. Remove the first rule if want to change the input set of the PCTYPE. +PF reset fail after QinQ set with FW >= 8.4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If upgrade FW to version 8.4 and higher, after set MAC VLAN filter and configure outer VLAN on PF, kill +DPDK process will cause the card crash. + + Example of getting best performance with l3fwd example ------------------------------------------------------
Signature · 1 line
2.17.1
Quoted 10 lines
-----Original Message-----
From: Yang, Qiming <[email protected]>
Sent: Friday, May 20, 2022 3:05 PM
To: [email protected]
Cc: Zhang, Qi Z <[email protected]>; Yang, Qiming <[email protected]>; [email protected]
Subject: [PATCH v4] doc: update matching versions in i40e guide
Quoted 2 lines
Add recommended matching list for i40e PMD in DPDK 21.05, 21.08, 21.11 and 22.03. And add a known issue when FW upgrade to a version higher than 8.4.
fixed "version higher than 8.4" to "version 8.4 and higher".
Quoted 4 lines
Signed-off-by Qiming Yang <[email protected]>
Applied to dpdk-next-net-intel.
Thanks
Qi