include/configs: Remove rootwait=1 to all the affected boards
PATCH 1/1 include/configs: Remove rootwait=1 to all the affected boards
rootwait=1 is not a valid kernel boot parameters. According to the documenation is only rootwait
rootwait [KNL] Wait (indefinitely) for root device to show up.
Useful for devices that are detected asynchronously (e.g. USB and MMC devices).
Fix:
Unknown kernel command line parameters "rootwait=1", will be passed to user space.
--- include/configs/am335x_evm.h | 2 +- include/configs/am43xx_evm.h | 2 +- include/configs/baltos.h | 2 +- include/configs/chiliboard.h | 2 +- include/configs/etamin.h | 2 +- include/configs/imx8mn_bsh_smm_s2.h | 2 +- include/configs/siemens-am33x-common.h | 4 ++-- include/configs/ti_armv7_keystone2.h | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
include/configs/am335x_evm.h +1 -1
@@ -34,7 +34,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
include/configs/am43xx_evm.h +1 -1
@@ -166,7 +166,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
include/configs/baltos.h +1 -1
@@ -37,7 +37,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"setenv loadaddr 0x84000000; " \
include/configs/chiliboard.h +1 -1
@@ -20,7 +20,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdt_addr} NAND.u-boot-spl-os; " \
include/configs/etamin.h +1 -1
@@ -113,7 +113,7 @@"nand_active_ubi_vol=rootfs_a\0" \"rootfs_name=rootfs\0" \"kernel_name=uImage\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_args=run bootargs_defaults;" \"mtdparts default;" \"setenv ${partitionset_active} true;" \
include/configs/imx8mn_bsh_smm_s2.h +1 -1
@@ -21,7 +21,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdt_addr_r} nanddtb; " \
include/configs/siemens-am33x-common.h +2 -2
@@ -237,7 +237,7 @@"nand_active_ubi_vol=rootfs_a\0" \"nand_active_ubi_vol_A=rootfs_a\0" \"nand_active_ubi_vol_B=rootfs_b\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_src_addr=0x280000\0" \"nand_src_addr_A=0x280000\0" \"nand_src_addr_B=0x780000\0" \
@@ -314,7 +314,7 @@"nand_active_ubi_vol=rootfs_a\0" \"rootfs_name=rootfs\0" \"kernel_name=uImage\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_args=run bootargs_defaults;" \"mtdparts default;" \"setenv ${partitionset_active} true;" \
include/configs/ti_armv7_keystone2.h +1 -1
@@ -180,7 +180,7 @@"sf write ${loadaddr} 0 ${filesize}\0" \"burn_uboot_nand=nand erase 0 0x100000; " \"nand write ${loadaddr} 0 ${filesize}\0" \ -"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ +"args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \KERNEL_MTD_PARTS \"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
Signature · 1 line
2.25.1
Quoted 138 lines · Michael Trimarchi
rootwait=1 is not a valid kernel boot parameters. According to the documenation is only rootwait
rootwait [KNL] Wait (indefinitely) for root device to show up.
Useful for devices that are detected asynchronously (e.g. USB and MMC devices).Fix:
Unknown kernel command line parameters "rootwait=1", will be passed to user space.Signed-off-by Michael Trimarchi <[email protected]>--- include/configs/am335x_evm.h | 2 +- include/configs/am43xx_evm.h | 2 +- include/configs/baltos.h | 2 +- include/configs/chiliboard.h | 2 +- include/configs/etamin.h | 2 +- include/configs/imx8mn_bsh_smm_s2.h | 2 +- include/configs/siemens-am33x-common.h | 4 ++-- include/configs/ti_armv7_keystone2.h | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)include/configs/am335x_evm.h +1
-1@@ -34,7 +34,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdtaddr} NAND.u-boot-spl-os; " \include/configs/am43xx_evm.h +1
-1@@ -166,7 +166,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdtaddr} NAND.u-boot-spl-os; " \include/configs/baltos.h +1
-1@@ -37,7 +37,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"setenv loadaddr 0x84000000; " \include/configs/chiliboard.h +1
-1@@ -20,7 +20,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdt_addr} NAND.u-boot-spl-os; " \include/configs/etamin.h +1
-1@@ -113,7 +113,7 @@"nand_active_ubi_vol=rootfs_a\0" \"rootfs_name=rootfs\0" \"kernel_name=uImage\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_args=run bootargs_defaults;" \"mtdparts default;" \"setenv ${partitionset_active} true;" \include/configs/imx8mn_bsh_smm_s2.h +1
-1@@ -21,7 +21,7 @@"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \"nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ -"nandrootfstype=ubifs rootwait=1\0" \ +"nandrootfstype=ubifs rootwait\0" \"nandboot=echo Booting from nand ...; " \"run nandargs; " \"nand read ${fdt_addr_r} nanddtb; " \include/configs/siemens-am33x-common.h +2
-2@@ -237,7 +237,7 @@"nand_active_ubi_vol=rootfs_a\0" \"nand_active_ubi_vol_A=rootfs_a\0" \"nand_active_ubi_vol_B=rootfs_b\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_src_addr=0x280000\0" \"nand_src_addr_A=0x280000\0" \"nand_src_addr_B=0x780000\0" \@@ -314,7 +314,7 @@"nand_active_ubi_vol=rootfs_a\0" \"rootfs_name=rootfs\0" \"kernel_name=uImage\0" \ -"nand_root_fs_type=ubifs rootwait=1\0" \ +"nand_root_fs_type=ubifs rootwait\0" \"nand_args=run bootargs_defaults;" \"mtdparts default;" \"setenv ${partitionset_active} true;" \include/configs/ti_armv7_keystone2.h +1
-1@@ -180,7 +180,7 @@"sf write ${loadaddr} 0 ${filesize}\0" \"burn_uboot_nand=nand erase 0 0x100000; " \"nand write ${loadaddr} 0 ${filesize}\0" \ -"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ +"args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \KERNEL_MTD_PARTS \"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \Signature · 1 line
2.25.1
Hi Michael,
Looks goot to me.
Signature · 10 lines
Tommaso Merciai Embedded Linux Engineer [email protected] __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 [email protected] www.amarulasolutions.com