sparse v0.6.4
Hi Luc,
I have tested the new release, without issue, in the normal way on the usual platforms (32- & 64-bit Linux, 64-bit cygwin).
[Have you posted to the sparse mailing-list yet? I think my subscription has lapsed or something! I recently had to re-subscribe to the git mailing-list as well. :( ]
Sorry for being tardy, but about 3 months ago a sparse issue came up on the git mailing-list (see [1]). Take a look at this:
$ cat -n junk.c
1
2 static void func(int x)
3 {
4 switch (x) {
5 default:
6 }
7 }
$ sparse junk.c
junk.c:6:9: error: Expected ; at end of statement
junk.c:6:9: error: got }
junk.c:8:0: error: Expected } at end of compound statement
junk.c:8:0: error: got end-of-input
junk.c:8:0: error: Expected } at end of function
junk.c:8:0: error: got end-of-input
$ Note: a case label that doesn't label a statement is not valid C, so what is the problem? Well, for me, the implication of the email exchange was that gcc seems to accept it without problem, except (with gcc 9.3.0):
$ gcc junk.c
junk.c: In function ‘func’:
junk.c:5:3: error: label at end of compound statement
5 | default:
| ^~~~~~~
$ ... it doesn't for me!
So, I decided just to improve the error message issued by sparse. However, that caused a moment of deja vu for me - hadn't you already fixed this same issue? Having found your commit 0d6bb7e1 ("handle more graciously labels with no statement", 2020-10-26), I realized that your fix only applied for regular labels. The attached patch was the result of extending your solution to case labels, like so:
$ ./sparse junk.c junk.c:6:9: warning: statement expected after case label $
Note, just like your earlier commit, this issues a warning, rather than an error (which it should probably be). I wrote this patch back in June, and then forgot about it. :( [well, it was only lightly tested (testsuite and one run over git), no tests, no commit message and it should probably be an error!]
About a month ago, I noticed that gcc 11.2 had been released and the release notes mentioned "Labels may appear before declarations and at the end of a compound statement." This, in turn, caused me to check my current draft C2x document (dated December 11, 2020), which includes the following:'N2508 Free Positioning of Labels Inside Compound Statements'.
It just so happens that, last night, I updated my cygwin installation and the version of gcc went from 10.2 to 11.2. I think you can probably guess what comes next:
$ gcc -c junk.c $
$ gcc -c -pedantic junk.c
junk.c: In function ‘func’:
junk.c:5:17: warning: label at end of compound statement [-Wpedantic]
5 | default:
| ^~~~~~~
$ [Note: I tried several -std=cxx, but none of them even warned without -pedantic]
So, for now, the standard does not allow these constructs, but the next standard (whenever that will be) will.
ATB,
Ramsay Jones
[1] https://lore.kernel.org/git/[email protected]/
From 39f65942a4047a391ca8323ae109ae3c1fe14bd9 Mon Sep 17 00:00:00 2001
From: Ramsay Jones <[email protected]>
Date: Mon, 6 Sep 2021 19:00:57 +0100
Subject: [PATCH] parse: warn about a 'case label' on empty statement
--- parse.c | 5 +++++ 1 file changed, 5 insertions(+)
parse.c +5 -0
@@ -2329,6 +2329,11 @@ static inline struct token *case_statement(struct token *token, struct statement stmt->type =STMT_CASE ; token =expect (token,':' ,"after default/case" );add_case_statement (stmt); +if (match_op (token,'}' )) { +warning (token->pos,"statement expected after case label" ); + stmt->case_statement =alloc_statement (token->pos,STMT_NONE ); +return token; + }return statement (token, &stmt->case_statement); }
Signature · 1 line
2.33.0
Quoted 5 lines · Ramsay Jones
Hi Luc,
I have tested the new release, without issue, in the normal way on the usual platforms (32- & 64-bit Linux, 64-bit cygwin).
Nice. Thank you.
Quoted 3 lines
[Have you posted to the sparse mailing-list yet? I think my subscription has lapsed or something! I recently had to re-subscribe to the git mailing-list as well. :( ]
Yes, it was posted on the ML (archived as
https://lore.kernel.org/linux-sparse/20210906042111.lhoq7egtpmw3jcv6@mail/ ) I used to be unsubscribed from various kernel.org mailing list relatively often (but I think I haven't been the last 2 years or so, at least from the sparse ML).
Quoted 32 lines
Sorry for being tardy, but about 3 months ago a sparse issue came up on the git mailing-list (see [1]). Take a look at this:
$ cat -n junk.c 1 2 static void func(int x) 3 { 4 switch (x) { 5 default: 6 } 7 } $ sparse junk.c junk.c:6:9: error: Expected ; at end of statement junk.c:6:9: error: got } junk.c:8:0: error: Expected } at end of compound statement junk.c:8:0: error: got end-of-input junk.c:8:0: error: Expected } at end of function junk.c:8:0: error: got end-of-input $Note: a case label that doesn't label a statement is not valid C, so what is the problem? Well, for me, the implication of the email exchange was that gcc seems to accept it without problem, except (with gcc 9.3.0):
$ gcc junk.c junk.c: In function ‘func’: junk.c:5:3: error: label at end of compound statement 5 | default: | ^~~~~~~ $
Quoted 7 lines
... it doesn't for me!
So, I decided just to improve the error message issued by sparse. However, that caused a moment of deja vu for me - hadn't you already fixed this same issue? Having found your commit
0d6bb7e1("handle more graciously labels with no statement", 2020-10-26), I realized that your fix only applied for regular labels.
I vaguely remember there was some complications for switch labels but I can't remember the details.
Quoted 9 lines
The attached patch was the result of extending your solution to case labels, like so:
$ ./sparse junk.c junk.c:6:9: warning: statement expected after case label $Note, just like your earlier commit, this issues a warning, rather than an error (which it should probably be).
I tend more and more to use errors only for the cases where Sparse can't handle the following correctly anymore.
Quoted 25 lines
I wrote this patch back in June, and
then forgot about it. :( [well, it was only lightly tested (testsuite and one run over git), no tests, no commit message and it should probably be an error!]About a month ago, I noticed that gcc 11.2 had been released and the release notes mentioned "Labels may appear before declarations and at the end of a compound statement." This, in turn, caused me to check my current draft C2x document (dated December 11, 2020), which includes the following:'N2508 Free Positioning of Labels Inside Compound Statements'.
It just so happens that, last night, I updated my cygwin installation and the version of gcc went from 10.2 to 11.2. I think you can probably guess what comes next:
$ gcc -c junk.c $$ gcc -c -pedantic junk.c junk.c: In function ‘func’: junk.c:5:17: warning: label at end of compound statement [-Wpedantic] 5 | default: | ^~~~~~~ $
Quoted 5 lines
[Note: I tried several -std=cxx, but none of them even warned without -pedantic]
So, for now, the standard does not allow these constructs, but the next standard (whenever that will be) will.
Yes, I'm aware of this but IIRC the motivation was related to the mixing of statements and declarations. The next standard is planned for 2023, meanwhile I don't have a strong opinion about this error/warning (but I'm very fine making things coherent between switch and regular labels).
Best regards,
-- Luc
Hi Luc,
Quoted 6 lines · Ramsay Jones
I have tested the new release, without issue, in the normal way on the usual platforms (32- & 64-bit Linux, 64-bit cygwin).
[Have you posted to the sparse mailing-list yet? I think my subscription has lapsed or something! I recently had to re-subscribe to the git mailing-list as well. :( ]
Odd, I didn't receive it either. No big deal, but I am just looking at a kernel build issue when using sparse v0.6.4.
It seems that $subject version adds builtins for ATOMIC_ACQUIRE and ATOMIC_RELEASE, but GCC has those too, so there are a few thousand (OK, I didn't count them - I killed it quickly) of these: (e.g.)
.. CHECK ../init/do_mounts_initrd.c
.command-line: note: in included file:
builtin:1:9: sparse: warning: preprocessor token __ATOMIC_ACQUIRE redefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token __ATOMIC_SEQ_CST redefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token __ATOMIC_ACQ_REL redefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token __ATOMIC_RELEASE redefined builtin:0:0: sparse: this was the original definition
Any suggestions for how to avoid these warnings?
thanks.
Signature · 1 line
~Randy
Quoted 1 line · Randy Dunlap
Hi Luc,
Hi Randy,
Apologies for this reply delayed for much too long.
Quoted 3 lines
It seems that $subject version adds builtins for
ATOMIC_ACQUIREandATOMIC_RELEASE, but GCC has those too, so there are a few thousand (OK, I didn't count them - I killed it quickly) of these: (e.g.)
Yes indeed, it was one of the things added in this release.
Quoted 11 lines
.. CHECK
../init/do_mounts_initrd.c
.command-line: note: in included file:
builtin:1:9: sparse: warning: preprocessor token__ATOMIC_ACQUIREredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_SEQ_CSTredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_ACQ_RELredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_RELEASEredefined builtin:0:0: sparse: this was the original definition
Quoted 1 line
Any suggestions for how to avoid these warnings?
Do you still see these? If yes, can you tell a bit about your setup and the exact command line used?
I'm asking because I never saw a problem with this, same for the test bots. It should be exactly the same as for any other predefined value. However, as predefined, they should all be reported from 'builtin:0:0:' and the 'builtin:1:9:' look as if those are from a '-include <somefile.h>' on the command line.
Best regards,
-- Luc
Quoted 6 lines · Luc Van Oostenryck
Quoted 1 line · Randy Dunlap
Hi Luc,
Hi Randy,
Apologies for this reply delayed for much too long.
Hey Luc,
Quoted 18 lines
Quoted 4 lines
It seems that $subject version adds builtins for
ATOMIC_ACQUIREandATOMIC_RELEASE, but GCC has those too, so there are a few thousand (OK, I didn't count them - I killed it quickly) of these: (e.g.)Yes indeed, it was one of the things added in this release.
Quoted 11 lines
.. CHECK
../init/do_mounts_initrd.c
.command-line: note: in included file:
builtin:1:9: sparse: warning: preprocessor token__ATOMIC_ACQUIREredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_SEQ_CSTredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_ACQ_RELredefined builtin:0:0: sparse: this was the original definition builtin:1:9: sparse: warning: preprocessor token__ATOMIC_RELEASEredefined builtin:0:0: sparse: this was the original definition
Quoted 4 lines
Quoted 1 line
Any suggestions for how to avoid these warnings?
Do you still see these? If yes, can you tell a bit about your setup and the exact command line used?
No, I no longer see these warnings. :)
Quoted 8 lines
I'm asking because I never saw a problem with this, same for the test bots. It should be exactly the same as for any other predefined value. However, as predefined, they should all be reported from 'builtin:0:0:' and the 'builtin:1:9:' look as if those are from a '-include <
somefile.h>' on the command line.Best regards,
-- Luc
Thanks.
Signature · 1 line
~Randy
PATCH 1/1 predefine __ATOMIC_ACQUIRE & friends as weak
In reply to Randy DunlapFrom: Luc Van Oostenryck <[email protected]>
In kernel's arch/mips/Makefile the whole content of gcc's -dM is used for CHECKFLAGS. This conflict with some macros also defined internally:
builtin:1:9: warning: preprocessor token __ATOMIC_ACQUIRE redefined builtin:0:0: this was the original definition
Fix this by using a weak define for these macros.
--- predefine.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
predefine.c +6 -6
@@ -179,12 +179,12 @@ void predefined_macros(void)if (arch_target->has_int128)predefined_sizeof ("INT128" ,"" ,128 ); -predefine ("__ATOMIC_RELAXED" ,0 ,"0" ); -predefine ("__ATOMIC_CONSUME" ,0 ,"1" ); -predefine ("__ATOMIC_ACQUIRE" ,0 ,"3" ); -predefine ("__ATOMIC_RELEASE" ,0 ,"4" ); -predefine ("__ATOMIC_ACQ_REL" ,0 ,"7" ); -predefine ("__ATOMIC_SEQ_CST" ,0 ,"8" ); +predefine ("__ATOMIC_RELAXED" ,1 ,"0" ); +predefine ("__ATOMIC_CONSUME" ,1 ,"1" ); +predefine ("__ATOMIC_ACQUIRE" ,1 ,"3" ); +predefine ("__ATOMIC_RELEASE" ,1 ,"4" ); +predefine ("__ATOMIC_ACQ_REL" ,1 ,"7" ); +predefine ("__ATOMIC_SEQ_CST" ,1 ,"8" );predefine ("__ORDER_LITTLE_ENDIAN__" ,1 ,"1234" );predefine ("__ORDER_BIG_ENDIAN__" ,1 ,"4321" );
Signature · 1 line
2.36.1