drm/sun4i: mixer: fix scanline for V3s and D1
Subsystems (5)
PATCH 1/1 drm/sun4i: mixer: fix scanline for V3s and D1
Accrording the SDK from Allwinner, the scanline value of yuv and rgb for V3s are both 1024. The is also the same for mixer 1 of D1. Currently the scanline value of rgb is hardcoded to 2048 for all SOCs.
Change the scanline_yuv property of V3s to 1024. Add the scanline_rgb property to the mixer config and replace the hardcoded value with it before scaling.
--- drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 ++++++++++++- drivers/gpu/drm/sun4i/sun8i_mixer.h | 1 + drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 3 +-- 3 files changed, 14 insertions(+), 3 deletions(-)
drivers/gpu/drm/sun4i/sun8i_mixer.c +12 -1
@@ -567,6 +567,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = { .ccsc = CCSC_MIXER0_LAYOUT, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };
@@ -575,6 +576,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = { .ccsc = CCSC_MIXER1_LAYOUT, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };
@@ -584,6 +586,7 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = { .mod_rate = 432000000, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };
@@ -593,6 +596,7 @@ static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };
@@ -602,6 +606,7 @@ static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };
@@ -610,7 +615,8 @@ static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = { .vi_num = 2, .ui_num = 1, .scaler_mask = 0x3, - .scanline_yuv = 2048, + .scanline_yuv = 1024, + .scanline_rgb = 1024, .ccsc = CCSC_MIXER0_LAYOUT, .mod_rate = 150000000, };
@@ -620,6 +626,7 @@ static const struct sun8i_mixer_cfg sun20i_d1_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };
@@ -629,6 +636,7 @@ static const struct sun8i_mixer_cfg sun20i_d1_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x1, .scanline_yuv = 1024, + .scanline_rgb = 1024, .ui_num = 0, .vi_num = 1, };
@@ -638,6 +646,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };
@@ -647,6 +656,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };
@@ -657,6 +667,7 @@ static const struct sun8i_mixer_cfg sun50i_h6_mixer0_cfg = { .mod_rate = 600000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };
drivers/gpu/drm/sun4i/sun8i_mixer.h +1 -0
@@ -172,6 +172,7 @@ struct sun8i_mixer_cfg {unsigned long mod_rate; unsigned int is_de3 : 1;unsigned int scanline_yuv; +unsigned int scanline_rgb; };struct sun8i_mixer {
drivers/gpu/drm/sun4i/sun8i_vi_layer.c +1 -2
@@ -188,8 +188,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, src_h = vn; } -/* it seems that every RGB scaler has buffer for 2048 pixels */ - scanline = subsampled ? mixer->cfg->scanline_yuv :2048 ; + scanline = subsampled ? mixer->cfg->scanline_yuv : mixer->cfg->scanline_rgb;if (src_w > scanline) {DRM_DEBUG_DRIVER ("Using horizontal coarse scaling\n" );
Signature · 1 line
2.36.0
Jernej Škrabec
maintainerHi!
Dne sobota, 21. maj 2022 ob 15:34:43 CEST je Genfu Pan napisal(a):
Quoted 2 lines
Accrording the SDK from Allwinner, the scanline value of yuv and rgb for V3s are both 1024.
s/scanline value/scanline length/
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB scanline limit. That doesn't mean there is none, I'm just unable to verify your claim. Did you test this by yourself? Also, please make YUV scanline change separate patch with fixes tag.
Quoted 6 lines
The is also the same for mixer 1 of D1. Currently the scanline value of rgb is hardcoded to 2048 for all SOCs.
Change the
scanline_yuvproperty of V3s to 1024. > Add thescanline_rgbproperty to the mixer config and replace the hardcoded value with it before scaling.
I guess RGB scanline patch would also need fixes tag, since it fixes existing bug.
Quoted 107 lines
Signed-off-by Genfu Pan <[email protected]>--- drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 ++++++++++++- drivers/gpu/drm/sun4i/sun8i_mixer.h | 1 + drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 3 +-- 3 files changed, 14 insertions(+), 3 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.cindex875a1156c..e64e08207100644drivers/gpu/drm/sun4i/sun8i_mixer.c +12
-1@@ -567,6 +567,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = { .ccsc = CCSC_MIXER0_LAYOUT, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -575,6 +576,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = { .ccsc = CCSC_MIXER1_LAYOUT, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -584,6 +586,7 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = { .mod_rate =432000000 , .scaler_mask =0xf , .scanline_yuv =2048 , + .scanline_rgb =2048 , .ui_num =3 , .vi_num =1 , };@@ -593,6 +596,7 @@ static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = { .mod_rate =297000000 , .scaler_mask =0xf , .scanline_yuv =2048 , + .scanline_rgb =2048 , .ui_num =3 , .vi_num =1 , };@@ -602,6 +606,7 @@ static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = { .mod_rate =297000000 , .scaler_mask =0x3 , .scanline_yuv =2048 , + .scanline_rgb =2048 , .ui_num =1 , .vi_num =1 , };@@ -610,7 +615,8 @@ static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = { .vi_num =2 , .ui_num =1 , .scaler_mask =0x3 , - .scanline_yuv =2048 , + .scanline_yuv =1024 , + .scanline_rgb =1024 , .ccsc =CCSC_MIXER0_LAYOUT , .mod_rate =150000000 , };@@ -620,6 +626,7 @@ static const struct sun8i_mixer_cfg sun20i_d1_mixer0_cfg = { .mod_rate =297000000 , .scaler_mask =0x3 , .scanline_yuv =2048 , + .scanline_rgb =2048 , .ui_num =1 , .vi_num =1 , };@@ -629,6 +636,7 @@ static const struct sun8i_mixer_cfg sun20i_d1_mixer1_cfg = { .mod_rate =297000000 , .scaler_mask =0x1 , .scanline_yuv =1024 , + .scanline_rgb =1024 , .ui_num =0 , .vi_num =1 , };@@ -638,6 +646,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -647,6 +656,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -657,6 +667,7 @@ static const struct sun8i_mixer_cfg sun50i_h6_mixer0_cfg = { .mod_rate =600000000 , .scaler_mask =0xf , .scanline_yuv =4096 , + .scanline_rgb =2048 , .ui_num =3 , .vi_num =1 , };(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.hindex85c94884f..c01b3e9d6100644
drivers/gpu/drm/sun4i/sun8i_mixer.h struct sun8i_mixer_cfg { · line 175
Quoted 4 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +1
-0@@ -172,6 +172,7 @@ struct sun8i_mixer_cfg {unsigned long mod_rate; unsigned int is_de3 : 1;unsigned int scanline_yuv; +unsigned int scanline_rgb;
This quirk needs to be documented above in the comment.
Best regards,
Jernej
drivers/gpu/drm/sun4i/sun8i_vi_layer.c static int sun8i_vi_layer_update_coord(struct · line 191
Quoted 12 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +0
-0};struct sun8i_mixer {(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_vi_layer.cindexf7d0b082d..30e6bde92100644drivers/gpu/drm/sun4i/sun8i_vi_layer.c +0
-1@@ -188,8 +188,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, src_h = vn; } -/* it seems that every RGB scaler has buffer for 2048
pixels */
drivers/gpu/drm/sun4i/sun8i_vi_layer.c static int sun8i_vi_layer_update_coord(struct · line 192
Quoted 1 line
drivers/gpu/drm/sun4i/sun8i_vi_layer.c +0
-1- scanline = subsampled ? mixer->cfg->scanline_yuv :
2048;
Quoted 5 lines
drivers/gpu/drm/sun4i/sun8i_vi_layer.c +1
-0+ scanline = subsampled ? mixer->cfg->scanline_yuv : mixer->cfg->scanline_rgb;if (src_w > scanline) {DRM_DEBUG_DRIVER("Using horizontal coarse
scaling\n");
Hi Jernej!
Quoted 4 lines
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB scanline limit. That doesn't mean there is none, I'm just unable to verify your claim. Did you test this by yourself? Also, please make YUV scanline change separate patch with fixes tag.
Here is the code about scanline config for V3s:
https://github.com/Tina-Linux/tina-v3s-linux-4.9/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_feat.c#L55
https://github.com/Tina-Linux/tina-v3s-linux-4.9/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_rtmx.c#L1212
And here is for D1:
https://gitlab.com/weidongshan/tina-d1-h/-/blob/main/lichee/linux-5.4/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_feat.c#L182
https://gitlab.com/weidongshan/tina-d1-h/-/blob/main/lichee/linux-5.4/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_rtmx.c#L1588
I was tested it on V3s. Without this patch, the plane will not display correctly if src_w large than 1024, for both YUV and RGB. I don't have a device with D1, so D1 is not tested. But according to the SDK code of D1, the scanline value of mixer1 is 1024.
I'm new to submitting patches, So may I ask a question? If there is no problem with this patch, what I need to do is to send new patches as you suggested?
Best regards,
Genfu Pan
Hi Jernej!
Quoted 4 lines
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB scanline limit. That doesn't mean there is none, I'm just unable to verify your claim. Did you test this by yourself? Also, please make YUV scanline change separate patch with fixes tag.
Here is the code about scanline config for V3s:
https://github.com/Tina-Linux/tina-v3s-linux-4.9/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_feat.c#L55
https://github.com/Tina-Linux/tina-v3s-linux-4.9/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_rtmx.c#L1212
And here is for D1:
https://gitlab.com/weidongshan/tina-d1-h/-/blob/main/lichee/linux-5.4/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_feat.c#L182
https://gitlab.com/weidongshan/tina-d1-h/-/blob/main/lichee/linux-5.4/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_rtmx.c#L1588
I was tested it on V3s. Without this patch, the plane will not display correctly if src_w large than 1024, for both YUV and RGB. I don't have a device with D1, so D1 is not tested. But according to the SDK code of D1, the scanline value of mixer1 is 1024.
I'm new to submitting patches, So may I ask a question? If there is no problem with this patch, what I need to do is to send new patches as you suggested?
Best regards,
Genfu Pan
Jernej Škrabec
maintainerDne nedelja, 22. maj 2022 ob 12:48:27 CEST je [email protected] napisal(a):
Quoted 3 lines
Hi Jernej!
Quoted 1 line
Which SDK? All SDKs that I have or found on internet don't mention YUV nor
RGB
Quoted 6 lines
Quoted 3 lines
scanline limit. That doesn't mean there is none, I'm just unable to verify your claim. Did you test this by yourself? Also, please make YUV scanline change separate patch with fixes tag.
Here is the code about scanline config for V3s:
https://github.com/Tina-Linux/tina-v3s-linux-4.9/blob/master/drivers/video/
fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_feat.c#L55
fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_rtmx.c#L1212
Quoted 3 lines
And here is for D1:
https://gitlab.com/weidongshan/tina-d1-h/-/blob/main/lichee/linux-5.4/
drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_feat.c#L182
drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_rtmx.c#L1588
Thanks for the links!
Quoted 9 lines
I was tested it on V3s. Without this patch, the plane will not display correctly if
src_wlarge than 1024, for both YUV and RGB. I don't have a device with D1, so D1 is not tested. But according to the SDK code of D1, the scanline value of mixer1 is 1024.I'm new to submitting patches, So may I ask a question? If there is no problem with this patch, what I need to do is to send new patches as you suggested?
https://www.kernel.org/doc/html/latest/process/submitting-patches.html
I already requested changes, so you need to send v2. But wait until discussion is finished.
Best regards,
Jernej
Quoted 5 lines
Best regards,
Genfu Pan
Quoted 9 lines · 在 2022-05-22星期日的 10:36 +0200,Jernej Škrabec写道:
Hi!
Dne sobota, 21. maj 2022 ob 15:34:43 CEST je Genfu Pan napisal(a):
Quoted 3 lines
Accrording the SDK from Allwinner, the scanline value of yuv and rgb for
V3s are both 1024.s/scanline value/scanline length/
Quoted 7 lines
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB
scanline limit. That doesn't mean there is none, I'm just unable to verify
your claim. Did you test this by yourself? Also, please make YUV scanline
change separate patch with fixes tag.
BTW I think chip manuals all say that the chip supports NxN resolution in DE2 chapter, e.g. the V3 datasheet says DE2 "Output size up to 1024x1024".
However there's no information about D1's second mixer.
Quoted 168 lines
Quoted 9 lines
The is also the same for mixer 1 of D1. Currently the scanline value of rgb is hardcoded to 2048 for all SOCs.
Change the
scanline_yuvproperty of V3s to 1024. > Add thescanline_rgb
property to the mixer config and replace the hardcoded value with it before
scaling.I guess RGB scanline patch would also need fixes tag, since it fixes existing
bug.Quoted 116 lines
Signed-off-by Genfu Pan <[email protected]>---
drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 ++++++++++++- drivers/gpu/drm/sun4i/sun8i_mixer.h | 1 +drivers/gpu/drm/sun4i/sun8i_vi_layer.c| 3 +--3 files changed, 14 insertions(+), 3 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.cindex875a1156c..e64e08207100644drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-0@@ -567,6 +567,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = { .ccsc = CCSC_MIXER0_LAYOUT, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -575,6 +576,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = { .ccsc = CCSC_MIXER1_LAYOUT, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -584,6 +586,7 @@ static const struct sun8i_mixer_cfg
sun8i_h3_mixer0_cfg
= { .mod_rate = 432000000,
.scaler_mask =0xf,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -593,6 +596,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer0_cfg
= { .mod_rate = 297000000,
.scaler_mask =0xf,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -602,6 +606,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer1_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x3,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 1,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -610,7 +615,8 @@ static const struct sun8i_mixer_cfg
sun8i_v3s_mixer_cfg
= { .vi_num = 2,
.ui_num = 1,
.scaler_mask =0x3,
- .scanline_yuv = 2048,
+ .scanline_yuv = 1024,
+ .scanline_rgb = 1024,
.ccsc =CCSC_MIXER0_LAYOUT,
.mod_rate = 150000000,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -620,6 +626,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer0_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x3,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 1,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -629,6 +636,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer1_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x1,
.scanline_yuv = 1024,
+ .scanline_rgb = 1024,
.ui_num = 0,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-0@@ -638,6 +646,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -647,6 +656,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -657,6 +667,7 @@ static const struct sun8i_mixer_cfg
sun50i_h6_mixer0_cfg
= { .mod_rate = 600000000,
.scaler_mask =0xf,
.scanline_yuv = 4096,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.hindex85c94884f..c01b3e9d6100644drivers/gpu/drm/sun4i/sun8i_mixer.h struct sun8i_mixer_cfg { · line 175
Quoted 4 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +1
-0@@ -172,6 +172,7 @@ struct sun8i_mixer_cfg { unsigned long mod_rate; unsigned int is_de3 : 1; unsigned int scanline_yuv; + unsigned int scanline_rgb;This quirk needs to be documented above in the comment.
Best regards,
JernejQuoted 13 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +0
-0}; struct sun8i_mixer {(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_vi_layer.cindexf7d0b082d..30e6bde92100644drivers/gpu/drm/sun4i/sun8i_vi_layer.c +0
-1@@ -188,8 +188,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, src_h = vn; } - /* it seems that every RGB scaler has buffer forQuoted 1 line
2048
pixels */
Quoted 1 line
- scanline = subsampled ?
mixer->cfg->scanline_yuv:2048;
Quoted 5 lines
+ scanline = subsampled ?
mixer->cfg->scanline_yuv:mixer->cfg->scanline_rgb;if (
src_w> scanline) { DRM_DEBUG_DRIVER("Using horizontal coarsescaling\n");
Samuel Holland
maintainerQuoted 18 lines · Icenowy Zheng
Quoted 9 lines · 在 2022-05-22星期日的 10:36 +0200,Jernej Škrabec写道:
Hi!
Dne sobota, 21. maj 2022 ob 15:34:43 CEST je Genfu Pan napisal(a):
Quoted 3 lines
Accrording the SDK from Allwinner, the scanline value of yuv and rgb for
V3s are both 1024.s/scanline value/scanline length/
Quoted 7 lines
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB
scanline limit. That doesn't mean there is none, I'm just unable to verify
your claim. Did you test this by yourself? Also, please make YUV scanline
change separate patch with fixes tag.
Quoted 5 lines
BTW I think chip manuals all say that the chip supports NxN resolution in DE2 chapter, e.g. the V3 datasheet says DE2 "Output size up to 1024x1024".
However there's no information about D1's second mixer.
My information comes from the BSP driver[0]:
static const int sun8iw20_de_scale_line_buffer[] = {
/* DISP0 */
2048,
/* DISP1 */
1024,
};It looks like the value returned from de_feat_get_scale_linebuf() may be used for RGB as well, if scaling is enabled. This appears to be the "format == 3" case in de_rtmx_get_coarse_fac[1]. On the other hand, the code for V3 has specific code for the RGB limit[2].
Is there some test I can do on D1 to see what the right value for RGB is?
Regards,
Samuel
[0]:
https://github.com/Tina-Linux/tina-d1x-linux-5.4/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_feat.c#L182
[1]:
https://github.com/Tina-Linux/tina-d1x-linux-5.4/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_rtmx.c#L1588
[2]:
https://github.com/Tina-Linux/tina-d1x-linux-5.4/blob/master/drivers/video/fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_rtmx.c#L1211
Quoted 169 lines
Quoted 167 lines
Quoted 8 lines
The is also the same for mixer 1 of D1. Currently the scanline value of rgb is hardcoded to 2048 for all SOCs.
Change the
scanline_yuvproperty of V3s to 1024. > Add thescanline_rgb
property to the mixer config and replace the hardcoded value with it before
scaling.I guess RGB scanline patch would also need fixes tag, since it fixes existing
bug.Quoted 116 lines
Signed-off-by Genfu Pan <[email protected]>---
drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 ++++++++++++- drivers/gpu/drm/sun4i/sun8i_mixer.h | 1 +drivers/gpu/drm/sun4i/sun8i_vi_layer.c| 3 +--3 files changed, 14 insertions(+), 3 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.cindex875a1156c..e64e08207100644drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-0@@ -567,6 +567,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = { .ccsc = CCSC_MIXER0_LAYOUT, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -575,6 +576,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = { .ccsc = CCSC_MIXER1_LAYOUT, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -584,6 +586,7 @@ static const struct sun8i_mixer_cfg
sun8i_h3_mixer0_cfg
= { .mod_rate = 432000000,
.scaler_mask =0xf,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -593,6 +596,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer0_cfg
= { .mod_rate = 297000000,
.scaler_mask =0xf,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -602,6 +606,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer1_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x3,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 1,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -610,7 +615,8 @@ static const struct sun8i_mixer_cfg
sun8i_v3s_mixer_cfg
= { .vi_num = 2,
.ui_num = 1,
.scaler_mask =0x3,
- .scanline_yuv = 2048,
+ .scanline_yuv = 1024,
+ .scanline_rgb = 1024,
.ccsc =CCSC_MIXER0_LAYOUT,
.mod_rate = 150000000,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -620,6 +626,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer0_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x3,
.scanline_yuv = 2048,
+ .scanline_rgb = 2048,
.ui_num = 1,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +0
-0@@ -629,6 +636,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer1_cfg
= { .mod_rate = 297000000,
.scaler_mask =0x1,
.scanline_yuv = 1024,
+ .scanline_rgb = 1024,
.ui_num = 0,
.vi_num = 1,
};drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-0@@ -638,6 +646,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -647,6 +656,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -657,6 +667,7 @@ static const struct sun8i_mixer_cfg
sun50i_h6_mixer0_cfg
= { .mod_rate = 600000000,
.scaler_mask =0xf,
.scanline_yuv = 4096,
+ .scanline_rgb = 2048,
.ui_num = 3,
.vi_num = 1,
};(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.hindex85c94884f..c01b3e9d6100644drivers/gpu/drm/sun4i/sun8i_mixer.h struct sun8i_mixer_cfg { · line 175
Quoted 4 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +1
-0@@ -172,6 +172,7 @@ struct sun8i_mixer_cfg { unsigned long mod_rate; unsigned int is_de3 : 1; unsigned int scanline_yuv; + unsigned int scanline_rgb;This quirk needs to be documented above in the comment.
Best regards,
JernejQuoted 13 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +0
-0}; struct sun8i_mixer {(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_vi_layer.cindexf7d0b082d..30e6bde92100644drivers/gpu/drm/sun4i/sun8i_vi_layer.c +0
-1@@ -188,8 +188,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, src_h = vn; } - /* it seems that every RGB scaler has buffer forQuoted 1 line
2048
pixels */
Quoted 1 line
- scanline = subsampled ?
mixer->cfg->scanline_yuv:2048;
Quoted 5 lines
+ scanline = subsampled ?
mixer->cfg->scanline_yuv:mixer->cfg->scanline_rgb;if (
src_w> scanline) { DRM_DEBUG_DRIVER("Using horizontal coarsescaling\n");
Jernej Škrabec
maintainerDne torek, 24. maj 2022 ob 19:07:27 CEST je Samuel Holland napisal(a):
Quoted 27 lines · Icenowy Zheng
Quoted 18 lines · 在 2022-05-22星期日的 10:36 +0200,Jernej Škrabec写道:
Quoted 9 lines
Hi!
Dne sobota, 21. maj 2022 ob 15:34:43 CEST je Genfu Pan napisal(a):
Quoted 3 lines
Accrording the SDK from Allwinner, the scanline value of yuv and rgb for
V3s are both 1024.s/scanline value/scanline length/
Quoted 7 lines
Which SDK? All SDKs that I have or found on internet don't mention YUV nor RGB
scanline limit. That doesn't mean there is none, I'm just unable to verify
your claim. Did you test this by yourself? Also, please make YUV scanline
change separate patch with fixes tag.Quoted 5 lines
BTW I think chip manuals all say that the chip supports NxN resolution in DE2 chapter, e.g. the V3 datasheet says DE2 "Output size up to 1024x1024".
However there's no information about D1's second mixer.
My information comes from the BSP driver[0]:
Quoted 8 lines
static const int sun8iw20_de_scale_line_buffer[] = { /* DISP0 */ 2048, /* DISP1 */ 1024, };It looks like the value returned from
de_feat_get_scale_linebuf()may be
used
Quoted 5 lines
for RGB as well, if scaling is enabled. This appears to be the "format == 3" case in de_rtmx_get_coarse_fac[1]. On the other hand, the code for V3 has specific code for the RGB limit[2].
Is there some test I can do on D1 to see what the right value for RGB is?
I use modetest for such tests. It's part of libdrm. In general, you want to make plane wider than scanline and then scale it down. Obviously you want to test this once with RGB and once with YUV format. This is all done with "modetest -P".
Best regards,
Jernej
Quoted 6 lines
Regards,
Samuel[0]:
https://github.com/Tina-Linux/tina-d1x-linux-5.4/blob/master/drivers/video/
fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_feat.c#L182
fbdev/sunxi/disp2/disp/de/lowlevel_v2x/de_rtmx.c#L1588
fbdev/sunxi/disp2/disp/de/lowlevel_sun8iw8/de_rtmx.c#L1211
Quoted 172 lines
Quoted 170 lines
Quoted 168 lines
Quoted 9 lines
The is also the same for mixer 1 of D1. Currently the scanline value of rgb is hardcoded to 2048 for all SOCs.
Change the
scanline_yuvproperty of V3s to 1024. > Add thescanline_rgb
property to the mixer config and replace the hardcoded value with it before
scaling.I guess RGB scanline patch would also need fixes tag, since it fixes existing
bug.Quoted 116 lines
Signed-off-by Genfu Pan <[email protected]>--- drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 ++++++++++++- drivers/gpu/drm/sun4i/sun8i_mixer.h | 1 + drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 3 +-- 3 files changed, 14 insertions(+), 3 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.cindex875a1156c..e64e08207100644drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-0@@ -567,6 +567,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = { .ccsc = CCSC_MIXER0_LAYOUT, .scaler_mask = 0xf, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -575,6 +576,7 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = { .ccsc = CCSC_MIXER1_LAYOUT, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -584,6 +586,7 @@ static const struct sun8i_mixer_cfg
sun8i_h3_mixer0_cfg
= { .mod_rate = 432000000,.scaler_mask = 0xf, .scanline_yuv = 2048,drivers/gpu/drm/sun4i/sun8i_mixer.c +1
-0+ .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -593,6 +596,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer0_cfg
= { .mod_rate = 297000000,.scaler_mask = 0xf, .scanline_yuv = 2048,drivers/gpu/drm/sun4i/sun8i_mixer.c +1
-0+ .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -602,6 +606,7 @@ static const struct sun8i_mixer_cfg
sun8i_r40_mixer1_cfg
= { .mod_rate = 297000000,.scaler_mask = 0x3, .scanline_yuv = 2048,drivers/gpu/drm/sun4i/sun8i_mixer.c +1
-0+ .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -610,7 +615,8 @@ static const struct sun8i_mixer_cfg
sun8i_v3s_mixer_cfg
= { .vi_num = 2,.ui_num = 1, .scaler_mask = 0x3,drivers/gpu/drm/sun4i/sun8i_mixer.c +2
-1- .scanline_yuv = 2048, + .scanline_yuv = 1024, + .scanline_rgb = 1024, .ccsc = CCSC_MIXER0_LAYOUT, .mod_rate = 150000000, };@@ -620,6 +626,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer0_cfg
= { .mod_rate = 297000000,.scaler_mask = 0x3, .scanline_yuv = 2048,drivers/gpu/drm/sun4i/sun8i_mixer.c +1
-0+ .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -629,6 +636,7 @@ static const struct sun8i_mixer_cfg
sun20i_d1_mixer1_cfg
= { .mod_rate = 297000000,.scaler_mask = 0x1, .scanline_yuv = 1024,drivers/gpu/drm/sun4i/sun8i_mixer.c +3
-0+ .scanline_rgb = 1024, .ui_num = 0, .vi_num = 1, };@@ -638,6 +646,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = { .mod_rate = 297000000, .scaler_mask = 0xf, .scanline_yuv = 4096, + .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };@@ -647,6 +656,7 @@ static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = { .mod_rate = 297000000, .scaler_mask = 0x3, .scanline_yuv = 2048, + .scanline_rgb = 2048, .ui_num = 1, .vi_num = 1, };@@ -657,6 +667,7 @@ static const struct sun8i_mixer_cfg
sun50i_h6_mixer0_cfg
= { .mod_rate = 600000000,.scaler_mask = 0xf, .scanline_yuv = 4096,drivers/gpu/drm/sun4i/sun8i_mixer.c +1
-0+ .scanline_rgb = 2048, .ui_num = 3, .vi_num = 1, };(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_mixer.hindex85c94884f..c01b3e9d6100644drivers/gpu/drm/sun4i/sun8i_mixer.h struct sun8i_mixer_cfg { · line 175
Quoted 4 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +1
-0@@ -172,6 +172,7 @@ struct sun8i_mixer_cfg {unsigned long mod_rate; unsigned int is_de3 : 1;unsigned int scanline_yuv; +unsigned int scanline_rgb;This quirk needs to be documented above in the comment.
Best regards,
JernejQuoted 13 lines
drivers/gpu/drm/sun4i/sun8i_mixer.h +0
-0};struct sun8i_mixer {(quoted diff) +0
-0
b/drivers/gpu/drm/sun4i/sun8i_vi_layer.cindexf7d0b082d..30e6bde92100644drivers/gpu/drm/sun4i/sun8i_vi_layer.c +0
-1@@ -188,8 +188,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, src_h = vn; } -/* it seems that every RGB scaler has buffer for Quoted 1 line
2048
pixels */
Quoted 1 line
- scanline = subsampled ?
mixer->cfg->scanline_yuv:2048;
Quoted 5 lines
+ scanline = subsampled ?
mixer->cfg->scanline_yuv:mixer->cfg->scanline_rgb;if (
src_w> scanline) {
DRM_DEBUG_DRIVER("Using horizontal coarsescaling\n");