two more btrfs read repair tests v2
Hi all,
this series adds two more tests for the btrfs read-repair code that exercise the raid1c3 profile.
Changes since v1:
- add common helpers for read repair
- increase the offsets so thay they should be fine with 64k block size (although I don't have a system to actually verify that)
PATCH 1/9 btrfs: add a helpers for read repair testing
Add a few helpers to consolidate code for btrfs read repair testing:
- _btrfs_get_first_logical() gets the btrfs logical address for the first extent in a file
- _btrfs_get_device_path and _btrfs_get_physical use the btrfs-map-logical tool to find the device path and physical address for btrfs logical address for a specific mirror
- _btrfs_direct_read_on_mirror and _btrfs_buffered_read_on_mirror read the data from a specific mirror
These will be used to consolidate the read repair tests and avoid duplication for new tests.
--- common/btrfs | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++ common/config | 1 + 2 files changed, 76 insertions(+)
common/btrfs +75 -0
@@ -505,3 +505,78 @@ _btrfs_metadump() $BTRFS_IMAGE_PROG "$device" "$dumpfile" [ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null } + +# Return the btrfs logical address for the first block in a file +_btrfs_get_first_logical() +{ + local file=$1 + _require_command "$FILEFRAG_PROG" filefrag + + ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full + ${FILEFRAG_PROG} -v $file | _filter_filefrag | cut -d '#' -f 1 +} + +# Find the device path for a btrfs logical offset +_btrfs_get_device_path() +{ + local logical=$1 + local stripe=$2 + + _require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical + + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV | \ + $AWK_PROG "(\$1 ~ /mirror/ && \$2 ~ /$stripe/) { print \$8 }" +} + + +# Find the device physical sector for a btrfs logical offset +_btrfs_get_physical() +{ + local logical=$1 + local stripe=$2 + + _require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical + + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV >> $seqres.full 2>&1 + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV | \ + $AWK_PROG "(\$1 ~ /mirror/ && \$2 ~ /$stripe/) { print \$6 }" +} + +# Read from a specific stripe to test read recovery that corrupted a specific +# stripe. Btrfs uses the PID to select the mirror, so keep reading until the +# xfs_io process that performed the read was executed with a PID that ends up +# on the intended mirror. +_btrfs_direct_read_on_mirror() +{ + local mirror=$1 + local nr_mirrors=$2 + local file=$3 + local offset=$4 + local size=$5 + + while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && + exec $XFS_IO_PROG -d \ + -c "pread -b $size $offset $size" $file) ]]; do + : + done +} + +# Read from a specific stripe to test read recovery that corrupted a specific +# stripe. Btrfs uses the PID to select the mirror, so keep reading until the +# xfs_io process that performed the read was executed with a PID that ends up +# on the intended mirror. +_btrfs_buffered_read_on_mirror() +{ + local mirror=$1 + local nr_mirrors=$2 + local file=$3 + local offset=$4 + local size=$5 + + echo 3 > /proc/sys/vm/drop_caches + while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && + exec $XFS_IO_PROG \ + -c "pread -b $size $offset $size" $file) ]]; do + : + done +}
common/config +1 -0
@@ -228,6 +228,7 @@ export E2IMAGE_PROG="$(type -P e2image)" export BLKZONE_PROG="$(type -P blkzone)" export GZIP_PROG="$(type -P gzip)" export BTRFS_IMAGE_PROG="$(type -P btrfs-image)" +export BTRFS_MAP_LOGICAL_PROG=$(type -P btrfs-map-logical) # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled. # newer systems have udevadm command but older systems like RHEL5 don't.
Signature · 1 line
2.30.2
Re: [PATCH 1/9] btrfs: add a helpers for read repair testing
Quoted 10 lines · Christoph Hellwig
Add a few helpers to consolidate code for btrfs read repair testing:
-
_btrfs_get_first_logical()gets the btrfs logical address for the first extent in a file
-_btrfs_get_device_pathand_btrfs_get_physicaluse the btrfs-map-logical tool to find the device path and physical address for btrfs logical address for a specific mirror
-_btrfs_direct_read_on_mirrorand_btrfs_buffered_read_on_mirrorread the data from a specific mirror
Quoted 4 lines
These will be used to consolidate the read repair tests and avoid duplication for new tests.
Signed-off-by Christoph Hellwig <[email protected]>
Some some small nitpicks inlined below.
Quoted 38 lines
--- common/btrfs | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++ common/config | 1 + 2 files changed, 76 insertions(+)common/btrfs +25
-0@@ -505,3 +505,78 @@ _btrfs_metadump() $BTRFS_IMAGE_PROG "$device" "$dumpfile" [ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null } + +# Return the btrfs logical address for the first block in a file +_btrfs_get_first_logical() +{ + local file=$1 + _require_command "$FILEFRAG_PROG" filefrag + + ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full + ${FILEFRAG_PROG} -v $file | _filter_filefrag | cut -d '#' -f 1 +} + +# Find the device path for a btrfs logical offset +_btrfs_get_device_path() +{ + local logical=$1 + local stripe=$2 + + _require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical + + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV | \ + $AWK_PROG "(\$1 ~ /mirror/ && \$2 ~ /$stripe/) { print \$8 }" +} + + +# Find the device physical sector for a btrfs logical offset
common/btrfs _btrfs_metadump() · line 542
Quoted 10 lines
common/btrfs +10
-0+_btrfs_get_physical() +{ + local logical=$1 + local stripe=$2 + + _require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical + + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV >> $seqres.full 2>&1 + $BTRFS_MAP_LOGICAL_PROG -l $logical $SCRATCH_DEV | \ + $AWK_PROG "(\$1 ~ /mirror/ && \$2 ~ /$stripe/) { print \$6 }"
Since the map logical output is saved into seqres, maybe it's better to add "-b <sectorsize>" parameters.
The default bytes is the nodesize (which is super werid), thus under corner cases, like at the stripe boundary, it can return multiple result groups and cause some confusion.
Although we will need another helper to grab the sectorsize of a mounted btrfs though.
Thanks,
Qu
Quoted 52 lines
common/btrfs +40
-0+} + +# Read from a specific stripe to test read recovery that corrupted a specific +# stripe. Btrfs uses the PID to select the mirror, so keep reading until the +# xfs_io process that performed the read was executed with a PID that ends up +# on the intended mirror. +_btrfs_direct_read_on_mirror() +{ + local mirror=$1 + local nr_mirrors=$2 + local file=$3 + local offset=$4 + local size=$5 + + while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && + exec $XFS_IO_PROG -d \ + -c "pread -b $size $offset $size" $file) ]]; do + : + done +} + +# Read from a specific stripe to test read recovery that corrupted a specific +# stripe. Btrfs uses the PID to select the mirror, so keep reading until the +# xfs_io process that performed the read was executed with a PID that ends up +# on the intended mirror. +_btrfs_buffered_read_on_mirror() +{ + local mirror=$1 + local nr_mirrors=$2 + local file=$3 + local offset=$4 + local size=$5 + + echo 3 > /proc/sys/vm/drop_caches + while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && + exec $XFS_IO_PROG \ + -c "pread -b $size $offset $size" $file) ]]; do + : + done +}common/config +1
-0@@ -228,6 +228,7 @@ export E2IMAGE_PROG="$(type -P e2image)" export BLKZONE_PROG="$(type -P blkzone)" export GZIP_PROG="$(type -P gzip)" export BTRFS_IMAGE_PROG="$(type -P btrfs-image)" +export BTRFS_MAP_LOGICAL_PROG=$(type -P btrfs-map-logical) # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled. # newer systems have udevadm command but older systems like RHEL5 don't.
Re: [PATCH 1/9] btrfs: add a helpers for read repair testing
In reply to Christoph HellwigQuoted 25 lines · Christoph Hellwig
Add a few helpers to consolidate code for btrfs read repair testing:
-
_btrfs_get_first_logical()gets the btrfs logical address for the first extent in a file
-_btrfs_get_device_pathand_btrfs_get_physicaluse the btrfs-map-logical tool to find the device path and physical address for btrfs logical address for a specific mirror
-_btrfs_direct_read_on_mirrorand_btrfs_buffered_read_on_mirrorread the data from a specific mirrorThese will be used to consolidate the read repair tests and avoid duplication for new tests.
Signed-off-by Christoph Hellwig <[email protected]>--- common/btrfs | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++ common/config | 1 + 2 files changed, 76 insertions(+)common/btrfs +0
-0@@ -505,3 +505,78 @@ _btrfs_metadump() $BTRFS_IMAGE_PROG "$device" "$dumpfile"
common/btrfs _btrfs_metadump() · line 515
Quoted 10 lines
common/btrfs +8
-0[ -n "$DUMP_COMPRESSOR" ] && $DUMP_COMPRESSOR -f "$dumpfile" &> /dev/null } + +# Return the btrfs logical address for the first block in a file +_btrfs_get_first_logical() +{ + local file=$1 + _require_command "$FILEFRAG_PROG" filefrag + + ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full
Likely you want to print the logical layout of the file for reference purposes? Then use $file instead of $SCRATCH_MNT/foobar
<snip>
Re: [PATCH 1/9] btrfs: add a helpers for read repair testing
Quoted 10 lines · Nikolay Borisov
common/btrfs _btrfs_metadump() · line 515
Quoted 7 lines
common/btrfs +7
-0+# Return the btrfs logical address for the first block in a file +_btrfs_get_first_logical() +{ + local file=$1 + _require_command "$FILEFRAG_PROG" filefrag + + ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.fullLikely you want to print the logical layout of the file for reference purposes? Then use $file instead of $SCRATCH_MNT/foobar
Yeah, this should use $file.
PATCH 2/9 btrfs/140: use common read repair helpers
In reply to Christoph HellwigUse the common helpers to find the btrfs logical address and to read from a specific mirror.
--- tests/btrfs/140 | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
tests/btrfs/140 +2 -11
@@ -24,7 +24,6 @@ _supported_fs btrfs _require_scratch_dev_pool 2 _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _require_odirect # Overwriting data is forbidden on a zoned block device _require_non_zoned_device "${SCRATCH_DEV}"
@@ -71,7 +70,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ echo "step 2......corrupt file extent" >>$seqres.full ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical=$(get_physical ${logical_in_btrfs} 1) devid=$(get_devid ${logical_in_btrfs} 1) devpath=$(get_device_path ${devid})
@@ -87,15 +86,7 @@ _scratch_mount # step 3, 128k dio read (this read can repair bad copy) echo "step 3......repair the bad copy" >>$seqres.full -# since raid1 consists of two copies, and the bad copy was put on stripe #1 -# while the good copy lies on stripe #0, the bad copy only gets access when the -# reader's pid % 2 == 1 is true -while true; do - $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null & - pid=$! - wait - [ $((pid % 2)) == 1 ] && break -done +_btrfs_direct_read_on_mirror 1 2 "$SCRATCH_MNT/foobar" 0 128K _scratch_unmount
Signature · 1 line
2.30.2
Re: [PATCH 2/9] btrfs/140: use common read repair helpers
Quoted 4 lines · Christoph Hellwig
Use the common helpers to find the btrfs logical address and to read from a specific mirror.
Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 42 lines
--- tests/btrfs/140 | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)tests/btrfs/140 +2
-11@@ -24,7 +24,6 @@ _supported_fs btrfs _require_scratch_dev_pool 2 _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _require_odirect # Overwriting data is forbidden on a zoned block device _require_non_zoned_device "${SCRATCH_DEV}"@@ -71,7 +70,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ echo "step 2......corrupt file extent" >>$seqres.full ${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical=$(get_physical ${logical_in_btrfs} 1) devid=$(get_devid ${logical_in_btrfs} 1) devpath=$(get_device_path ${devid})@@ -87,15 +86,7 @@ _scratch_mount # step 3, 128k dio read (this read can repair bad copy) echo "step 3......repair the bad copy" >>$seqres.full -# since raid1 consists of two copies, and the bad copy was put on stripe #1 -# while the good copy lies on stripe #0, the bad copy only gets access when the -# reader's pid % 2 == 1 is true -while true; do - $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null & - pid=$! - wait - [ $((pid % 2)) == 1 ] && break -done +_btrfs_direct_read_on_mirror 1 2 "$SCRATCH_MNT/foobar" 0 128K _scratch_unmount
PATCH 3/9 btrfs/141: use common read repair helpers
In reply to Christoph HellwigUse the common helpers to find the btrfs logical address and to read from a specific mirror.
--- tests/btrfs/141 | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
tests/btrfs/141 +2 -13
@@ -25,7 +25,6 @@ _supported_fs btrfs _require_scratch_dev_pool 2 _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag get_physical() {
@@ -69,8 +68,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # one in $SCRATCH_DEV_POOL echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical=$(get_physical ${logical_in_btrfs} 1) devid=$(get_devid ${logical_in_btrfs} 1) devpath=$(get_device_path ${devid})
@@ -85,16 +83,7 @@ _scratch_mount # step 3, 128k buffered read (this read can repair bad copy) echo "step 3......repair the bad copy" >>$seqres.full -# since raid1 consists of two copies, and the bad copy was put on stripe #1 -# while the good copy lies on stripe #0, the bad copy only gets access when the -# reader's pid % 2 == 1 is true -while true; do - echo 3 > /proc/sys/vm/drop_caches - $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null & - pid=$! - wait - [ $((pid % 2)) == 1 ] && break -done +_btrfs_buffered_read_on_mirror 1 2 "$SCRATCH_MNT/foobar" 0 128K _scratch_unmount
Signature · 1 line
2.30.2
Re: [PATCH 3/9] btrfs/141: use common read repair helpers
Quoted 4 lines · Christoph Hellwig
Use the common helpers to find the btrfs logical address and to read from a specific mirror.
Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 44 lines
--- tests/btrfs/141 | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)tests/btrfs/141 +2
-13@@ -25,7 +25,6 @@ _supported_fs btrfs _require_scratch_dev_pool 2 _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag get_physical() {@@ -69,8 +68,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # one in $SCRATCH_DEV_POOL echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical=$(get_physical ${logical_in_btrfs} 1) devid=$(get_devid ${logical_in_btrfs} 1) devpath=$(get_device_path ${devid})@@ -85,16 +83,7 @@ _scratch_mount # step 3, 128k buffered read (this read can repair bad copy) echo "step 3......repair the bad copy" >>$seqres.full -# since raid1 consists of two copies, and the bad copy was put on stripe #1 -# while the good copy lies on stripe #0, the bad copy only gets access when the -# reader's pid % 2 == 1 is true -while true; do - echo 3 > /proc/sys/vm/drop_caches - $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null & - pid=$! - wait - [ $((pid % 2)) == 1 ] && break -done +_btrfs_buffered_read_on_mirror 1 2 "$SCRATCH_MNT/foobar" 0 128K _scratch_unmount
PATCH 4/9 btrfs/142: use common read repair helpers
In reply to Christoph HellwigUse the common helpers to find the btrfs logical address and to read from a specific mirror.
--- tests/btrfs/142 | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
tests/btrfs/142 +3 -7
@@ -27,7 +27,6 @@ _require_scratch_dev_pool 2 _require_dm_target dust _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _scratch_dev_pool_get 2 # step 1, create a raid1 btrfs which contains one 128k file.
@@ -46,8 +45,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # step 2, corrupt the first 64k of stripe #1 echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) echo "Logical offset is $logical_in_btrfs" >>$seqres.full _scratch_unmount
@@ -67,10 +65,8 @@ echo "step 3......repair the bad copy" >>$seqres.full $DMSETUP_PROG message dust-test 0 addbadblock $((physical / 512)) $DMSETUP_PROG message dust-test 0 enable -while [[ -z $( (( BASHPID % 2 == stripe )) && - exec $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar") ]]; do - : -done + +_btrfs_direct_read_on_mirror $stripe 2 "$SCRATCH_MNT/foobar" 0 128K _cleanup_dust
Signature · 1 line
2.30.2
Re: [PATCH 4/9] btrfs/142: use common read repair helpers
Quoted 4 lines · Christoph Hellwig
Use the common helpers to find the btrfs logical address and to read from a specific mirror.
Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 39 lines
--- tests/btrfs/142 | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)tests/btrfs/142 +3
-7@@ -27,7 +27,6 @@ _require_scratch_dev_pool 2 _require_dm_target dust _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _scratch_dev_pool_get 2 # step 1, create a raid1 btrfs which contains one 128k file.@@ -46,8 +45,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # step 2, corrupt the first 64k of stripe #1 echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) echo "Logical offset is $logical_in_btrfs" >>$seqres.full _scratch_unmount@@ -67,10 +65,8 @@ echo "step 3......repair the bad copy" >>$seqres.full $DMSETUP_PROG message dust-test 0 addbadblock $((physical / 512)) $DMSETUP_PROG message dust-test 0 enable -while [[ -z $( (( BASHPID % 2 == stripe )) && - exec $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar") ]]; do - : -done + +_btrfs_direct_read_on_mirror $stripe 2 "$SCRATCH_MNT/foobar" 0 128K _cleanup_dust
PATCH 5/9 btrfs/143: use common read repair helpers
In reply to Christoph HellwigUse the common helpers to find the btrfs logical address and to read from a specific mirror.
--- tests/btrfs/143 | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
tests/btrfs/143 +3 -7
@@ -34,7 +34,6 @@ _require_scratch_dev_pool 2 _require_dm_target dust _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _scratch_dev_pool_get 2 # step 1, create a raid1 btrfs which contains one 128k file.
@@ -53,8 +52,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # step 2, corrupt the first 64k of stripe #1 echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) echo "Logical offset is $logical_in_btrfs" >>$seqres.full _scratch_unmount
@@ -74,10 +72,8 @@ echo "step 3......repair the bad copy" >>$seqres.full $DMSETUP_PROG message dust-test 0 addbadblock $((physical / 512)) $DMSETUP_PROG message dust-test 0 enable -while [[ -z $( (( BASHPID % 2 == stripe )) && - exec $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar") ]]; do - : -done + +_btrfs_buffered_read_on_mirror $stripe 2 "$SCRATCH_MNT/foobar" 0 128K _cleanup_dust
Signature · 1 line
2.30.2
Re: [PATCH 5/9] btrfs/143: use common read repair helpers
Quoted 4 lines · Christoph Hellwig
Use the common helpers to find the btrfs logical address and to read from a specific mirror.
Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 39 lines
--- tests/btrfs/143 | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)tests/btrfs/143 +3
-7@@ -34,7 +34,6 @@ _require_scratch_dev_pool 2 _require_dm_target dust _require_btrfs_command inspect-internal dump-tree -_require_command "$FILEFRAG_PROG" filefrag _scratch_dev_pool_get 2 # step 1, create a raid1 btrfs which contains one 128k file.@@ -53,8 +52,7 @@ $XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ # step 2, corrupt the first 64k of stripe #1 echo "step 2......corrupt file extent" >>$seqres.full -${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full -logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical_in_btrfs=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) echo "Logical offset is $logical_in_btrfs" >>$seqres.full _scratch_unmount@@ -74,10 +72,8 @@ echo "step 3......repair the bad copy" >>$seqres.full $DMSETUP_PROG message dust-test 0 addbadblock $((physical / 512)) $DMSETUP_PROG message dust-test 0 enable -while [[ -z $( (( BASHPID % 2 == stripe )) && - exec $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar") ]]; do - : -done + +_btrfs_buffered_read_on_mirror $stripe 2 "$SCRATCH_MNT/foobar" 0 128K _cleanup_dust
PATCH 6/9 btrfs/157: use _btrfs_get_first_logical
In reply to Christoph HellwigUse the _btrfs_get_first_logical helper instead of open coding it.
--- tests/btrfs/157 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/btrfs/157 +1 -1
@@ -71,7 +71,7 @@ _scratch_mount $(_btrfs_no_v1_cache_opt) $XFS_IO_PROG -f -d -c "pwrite -S 0xaa 0 128K" -c "fsync" \ "$SCRATCH_MNT/foobar" | _filter_xfs_io -logical=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) _scratch_unmount phy0=$(get_physical 0)
Signature · 1 line
2.30.2
Re: [PATCH 6/9] btrfs/157: use _btrfs_get_first_logical
Quoted 3 lines · Christoph Hellwig
Use the
_btrfs_get_first_logicalhelper instead of open coding it.Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 17 lines
--- tests/btrfs/157 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tests/btrfs/157 +1
-1@@ -71,7 +71,7 @@ _scratch_mount $(_btrfs_no_v1_cache_opt) $XFS_IO_PROG -f -d -c "pwrite -S 0xaa 0 128K" -c "fsync" \ "$SCRATCH_MNT/foobar" | _filter_xfs_io -logical=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1` +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) _scratch_unmount phy0=$(get_physical 0)
PATCH 7/9 btrfs/215: use _btrfs_get_first_logical
In reply to Christoph HellwigUse the _btrfs_get_first_logical helper instead of open coding it.
--- tests/btrfs/215 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/btrfs/215 +1 -1
@@ -56,7 +56,7 @@ fi #create an 8 block file $XFS_IO_PROG -d -f -c "pwrite -S 0xbb -b $filesize 0 $filesize" "$SCRATCH_MNT/foobar" > /dev/null -logical_extent=$($FILEFRAG_PROG -v "$SCRATCH_MNT/foobar" | _filter_filefrag | cut -d '#' -f 1) +logical_extent=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical_extent=$(get_physical $logical_extent) echo "logical = $logical_extent physical=$physical_extent" >> $seqres.full
Signature · 1 line
2.30.2
Re: [PATCH 7/9] btrfs/215: use _btrfs_get_first_logical
Quoted 3 lines · Christoph Hellwig
Use the
_btrfs_get_first_logicalhelper instead of open coding it.Signed-off-by Christoph Hellwig <[email protected]>
Thanks,
Qu
Quoted 17 lines
--- tests/btrfs/215 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tests/btrfs/215 +1
-1@@ -56,7 +56,7 @@ fi #create an 8 block file $XFS_IO_PROG -d -f -c "pwrite -S 0xbb -b $filesize 0 $filesize" "$SCRATCH_MNT/foobar" > /dev/null -logical_extent=$($FILEFRAG_PROG -v "$SCRATCH_MNT/foobar" | _filter_filefrag | cut -d '#' -f 1) +logical_extent=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) physical_extent=$(get_physical $logical_extent) echo "logical = $logical_extent physical=$physical_extent" >> $seqres.full
PATCH 8/9 btrfs: test repair with sectors corrupted in multiple mirrors
In reply to Christoph HellwigTest that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile.
--- tests/btrfs/265 | 86 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/265.out | 75 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) create mode 100755 tests/btrfs/265 create mode 100644 tests/btrfs/265.out
tests/btrfs/265 new file +86 -0
@@ -0,0 +1,86 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2017 Liu Bo. All Rights Reserved. +# Copyright (c) 2022 Christoph Hellwig. +# +# FS QA Test 265 +# +# Test that btrfs raid repair on a raid1c3 profile can repair corruption on two +# mirrors for the same logical offset. +# +. ./common/preamble +_begin_fstest auto quick read_repair + +# Import common functions. +. ./common/filter + +# real QA test starts here + +_supported_fs btrfs +_require_scratch_dev_pool 3 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 3 +# step 1, create a raid1 btrfs which contains one 128k file. +echo "step 1......mkfs.btrfs" + +mkfs_opts="-d raid1c3 -b 1G" +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 + +# make sure data is written to the start position of the data chunk +_scratch_mount $(_btrfs_no_v1_cache_opt) + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" \ + "$SCRATCH_MNT/foobar" | \ + _filter_xfs_io_offset + +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first +# one in $SCRATCH_DEV_POOL +echo "step 2......corrupt file extent" + +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +physical2=$(_btrfs_get_physical ${logical} 2) +devpath2=$(_btrfs_get_device_path ${logical} 2) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical1 64K" $devpath1 \ + > /dev/null + +echo " corrupt stripe #2, devpath $devpath2 physical $physical2" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical2 64K" $devpath2 \ + > /dev/null + +_scratch_mount + +# step 3, 128k dio read (this read can repair bad copy) +echo "step 3......repair the bad copy" + +_btrfs_direct_read_on_mirror 0 3 "$SCRATCH_MNT/foobar" 0 128K +_btrfs_direct_read_on_mirror 1 3 "$SCRATCH_MNT/foobar" 0 128K + +_scratch_unmount + +echo "step 4......check if the repair worked" +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical2 512" $devpath2 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exit
tests/btrfs/265.out new file +75 -0
75 lines not on this page · raw message
Signature · 1 line
2.30.2
Re: [PATCH 8/9] btrfs: test repair with sectors corrupted in multiple mirrors
Quoted 4 lines · Christoph Hellwig
Test that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile.
Signed-off-by Christoph Hellwig <[email protected]>
Just a cosmetic nitpick inlined below.
Quoted 36 lines
--- tests/btrfs/265 | 86 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/265.out | 75 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+)create mode 100755 tests/btrfs/265
create mode 100644 tests/btrfs/265.outtests/btrfs/265 new file +23
-0@@ -0,0 +1,86 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2017 Liu Bo. All Rights Reserved. +# Copyright (c) 2022 Christoph Hellwig. +# +# FS QA Test 265 +# +# Test that btrfs raid repair on a raid1c3 profile can repair corruption on two +# mirrors for the same logical offset. +# +. ./common/preamble +_begin_fstest auto quick read_repair + +# Import common functions. +. ./common/filter + +# real QA test starts here + +_supported_fs btrfs +_require_scratch_dev_pool 3 + +_require_odirect +# Overwriting data is forbidden on a zoned block device
tests/btrfs/265 line 33
Quoted 10 lines
tests/btrfs/265 new file +10
-0+_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 3 +# step 1, create a raid1 btrfs which contains one 128k file. +echo "step 1......mkfs.btrfs" + +mkfs_opts="-d raid1c3 -b 1G" +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 + +# make sure data is written to the start position of the data chunk
This comment is definitely from old test cases.
Now it's obsolete in several ways:
- We have solid reasons that btrfs can write the new data into the middle of an empty chunk
The full details explanation can be found here:
https://lore.kernel.org/linux-btrfs/[email protected]/T/#u
- Now with the new helpers, we no longer relies on the extent layout
So we don't need the comment, nor the _btrfs_no_v1_cache_opt here.
Thanks,
Qu
Quoted 134 lines
tests/btrfs/265 new file +53
-0+_scratch_mount $(_btrfs_no_v1_cache_opt) + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" \ + "$SCRATCH_MNT/foobar" | \ + _filter_xfs_io_offset + +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first +# one in $SCRATCH_DEV_POOL +echo "step 2......corrupt file extent" + +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +physical2=$(_btrfs_get_physical ${logical} 2) +devpath2=$(_btrfs_get_device_path ${logical} 2) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical1 64K" $devpath1 \ + > /dev/null + +echo " corrupt stripe #2, devpath $devpath2 physical $physical2" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical2 64K" $devpath2 \ + > /dev/null + +_scratch_mount + +# step 3, 128k dio read (this read can repair bad copy) +echo "step 3......repair the bad copy" + +_btrfs_direct_read_on_mirror 0 3 "$SCRATCH_MNT/foobar" 0 128K +_btrfs_direct_read_on_mirror 1 3 "$SCRATCH_MNT/foobar" 0 128K + +_scratch_unmount + +echo "step 4......check if the repair worked" +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical2 512" $devpath2 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/265.out new file +75
-0@@ -0,0 +1,75 @@ +QA output created by 265 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt file extent +step 3......repair the bad copy +step 4......check if the repair worked +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Re: [PATCH 8/9] btrfs: test repair with sectors corrupted in multiple mirrors
In reply to Christoph HellwigQuoted 2 lines · Christoph Hellwig
Test that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile.
The test currently fails (at least on current misc-next branch), as the repair does not happen, see below. Is it a bug in the repair code for raid1c3 (I haven't checked)?
The other two tests in the series are passing. Also why only raid1c3 coverage and not raid1c4 as well?
Thanks.
home/fdmanana/git/hub/xfstests/results//btrfs/265.out.bad renamed from home/fdmanana/git/hub/xfstests/tests/btrfs/265.out +32 -32
@@ -5,38 +5,38 @@ step 2......corrupt file extent step 3......repair the bad copy step 4......check if the repair worked -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ +XXXXXXXX: bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf bf ................ read 512/512 bytes XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
Quoted 185 lines
Signed-off-by Christoph Hellwig <[email protected]>--- tests/btrfs/265 | 86 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/265.out | 75 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) create mode 100755 tests/btrfs/265 create mode 100644 tests/btrfs/265.outtests/btrfs/265 new file +86
-0@@ -0,0 +1,86 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2017 Liu Bo. All Rights Reserved. +# Copyright (c) 2022 Christoph Hellwig. +# +# FS QA Test 265 +# +# Test that btrfs raid repair on a raid1c3 profile can repair corruption on two +# mirrors for the same logical offset. +# +. ./common/preamble +_begin_fstest auto quick read_repair + +# Import common functions. +. ./common/filter + +# real QA test starts here + +_supported_fs btrfs +_require_scratch_dev_pool 3 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 3 +# step 1, create a raid1 btrfs which contains one 128k file. +echo "step 1......mkfs.btrfs" + +mkfs_opts="-d raid1c3 -b 1G" +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 + +# make sure data is written to the start position of the data chunk +_scratch_mount $(_btrfs_no_v1_cache_opt) + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" \ + "$SCRATCH_MNT/foobar" | \ + _filter_xfs_io_offset + +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first +# one in $SCRATCH_DEV_POOL +echo "step 2......corrupt file extent" + +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +physical2=$(_btrfs_get_physical ${logical} 2) +devpath2=$(_btrfs_get_device_path ${logical} 2) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical1 64K" $devpath1 \ + > /dev/null + +echo " corrupt stripe #2, devpath $devpath2 physical $physical2" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xbf -b 64K $physical2 64K" $devpath2 \ + > /dev/null + +_scratch_mount + +# step 3, 128k dio read (this read can repair bad copy) +echo "step 3......repair the bad copy" + +_btrfs_direct_read_on_mirror 0 3 "$SCRATCH_MNT/foobar" 0 128K +_btrfs_direct_read_on_mirror 1 3 "$SCRATCH_MNT/foobar" 0 128K + +_scratch_unmount + +echo "step 4......check if the repair worked" +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical2 512" $devpath2 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/265.out new file +75
-0@@ -0,0 +1,75 @@ +QA output created by 265 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt file extent +step 3......repair the bad copy +step 4......check if the repair worked +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)Signature · 1 line
2.30.2
Re: [PATCH 8/9] btrfs: test repair with sectors corrupted in multiple mirrors
Quoted 7 lines · Filipe Manana
Quoted 2 lines · Christoph Hellwig
Test that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile.
The test currently fails (at least on current misc-next branch), as the repair does not happen, see below. Is it a bug in the repair code for raid1c3 (I haven't checked)?
Yes, it only repairs the previously bad copy and doesn't propagate the repair.
Quoted 1 line
Also why only raid1c3 coverage and not raid1c4 as well?
Because I've really wanted any coverage at all for mutiple mirror repair operations. raid1c4 is probably useful to test, but won't increase the coverage of the read repair code much.
PATCH 9/9 btrfs: test repair with corrupted sectors interleaved over multiple mirrors
In reply to Christoph HellwigTest that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile and needs to take turns over the mirrors to recover data for the whole read.
--- tests/btrfs/266 | 94 ++++++++++++++++++++++++++++++++++++++ tests/btrfs/266.out | 109 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 203 insertions(+) create mode 100755 tests/btrfs/266 create mode 100644 tests/btrfs/266.out
tests/btrfs/266 new file +94 -0
@@ -0,0 +1,94 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2017 Liu Bo. All Rights Reserved. +# Copyright (c) 2022 Christoph Hellwig. +# +# FS QA Test 266 +# +# Test that btrfs raid repair on a raid1c3 profile can repair interleaving +# errors on all mirrors. +# + +. ./common/preamble +_begin_fstest auto quick read_repair + +# Import common functions. +. ./common/filter + +# real QA test starts here + +_supported_fs btrfs +_require_scratch_dev_pool 3 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 3 +# step 1, create a raid1 btrfs which contains one 128k file. +echo "step 1......mkfs.btrfs" + +mkfs_opts="-d raid1c3 -b 1G" +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 + +# make sure data is written to the start position of the data chunk +_scratch_mount $(_btrfs_no_v1_cache_opt) + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 256K 0 256K" \ + "$SCRATCH_MNT/foobar" | \ + _filter_xfs_io_offset + +# step 2, corrupt 4k in each copy +echo "step 2......corrupt file extent" + +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +physical2=$(_btrfs_get_physical ${logical} 2) +devpath2=$(_btrfs_get_device_path ${logical} 2) + +physical3=$(_btrfs_get_physical ${logical} 3) +devpath3=$(_btrfs_get_device_path ${logical} 3) + +_scratch_unmount + +$XFS_IO_PROG -d -c "pwrite -S 0xbd -b 64K $physical3 64K" \ + $devpath3 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xba -b 64K $physical1 128K" \ + $devpath1 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $((physical2 + 65536)) 128K" \ + $devpath2 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xbc -b 64K $((physical3 + (2 * 65536))) 128K" \ + $devpath3 > /dev/null + +_scratch_mount + +# step 3, 128k dio read (this read can repair bad copy) +echo "step 3......repair the bad copy" + +_btrfs_buffered_read_on_mirror 0 3 "$SCRATCH_MNT/foobar" 0 256K +_btrfs_buffered_read_on_mirror 1 3 "$SCRATCH_MNT/foobar" 0 256K +_btrfs_buffered_read_on_mirror 2 3 "$SCRATCH_MNT/foobar" 0 256K + +_scratch_unmount + +echo "step 4......check if the repair worked" +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical2 512" $devpath2 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical3 512" $devpath3 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exit
tests/btrfs/266.out new file +109 -0
109 lines not on this page · raw message
Signature · 1 line
2.30.2
Re: [PATCH 9/9] btrfs: test repair with corrupted sectors interleaved over multiple mirrors
Quoted 5 lines · Christoph Hellwig
Test that repair handles the case where it needs to read from more than a single mirror on the raid1c3 profile and needs to take turns over the mirrors to recover data for the whole read.
Signed-off-by Christoph Hellwig <[email protected]>
Just the same cosmetic nitpick on the _btrfs_no_v1_cache_opt and its comments.
Thanks,
Qu
Quoted 222 lines
--- tests/btrfs/266 | 94 ++++++++++++++++++++++++++++++++++++++ tests/btrfs/266.out | 109 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 203 insertions(+)create mode 100755 tests/btrfs/266
create mode 100644 tests/btrfs/266.outtests/btrfs/266 new file +94
-0@@ -0,0 +1,94 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2017 Liu Bo. All Rights Reserved. +# Copyright (c) 2022 Christoph Hellwig. +# +# FS QA Test 266 +# +# Test that btrfs raid repair on a raid1c3 profile can repair interleaving +# errors on all mirrors. +# + +. ./common/preamble +_begin_fstest auto quick read_repair + +# Import common functions. +. ./common/filter + +# real QA test starts here + +_supported_fs btrfs +_require_scratch_dev_pool 3 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 3 +# step 1, create a raid1 btrfs which contains one 128k file. +echo "step 1......mkfs.btrfs" + +mkfs_opts="-d raid1c3 -b 1G" +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1 + +# make sure data is written to the start position of the data chunk +_scratch_mount $(_btrfs_no_v1_cache_opt) + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 256K 0 256K" \ + "$SCRATCH_MNT/foobar" | \ + _filter_xfs_io_offset + +# step 2, corrupt 4k in each copy +echo "step 2......corrupt file extent" + +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +physical2=$(_btrfs_get_physical ${logical} 2) +devpath2=$(_btrfs_get_device_path ${logical} 2) + +physical3=$(_btrfs_get_physical ${logical} 3) +devpath3=$(_btrfs_get_device_path ${logical} 3) + +_scratch_unmount + +$XFS_IO_PROG -d -c "pwrite -S 0xbd -b 64K $physical3 64K" \ + $devpath3 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xba -b 64K $physical1 128K" \ + $devpath1 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $((physical2 + 65536)) 128K" \ + $devpath2 > /dev/null + +$XFS_IO_PROG -d -c "pwrite -S 0xbc -b 64K $((physical3 + (2 * 65536))) 128K" \ + $devpath3 > /dev/null + +_scratch_mount + +# step 3, 128k dio read (this read can repair bad copy) +echo "step 3......repair the bad copy" + +_btrfs_buffered_read_on_mirror 0 3 "$SCRATCH_MNT/foobar" 0 256K +_btrfs_buffered_read_on_mirror 1 3 "$SCRATCH_MNT/foobar" 0 256K +_btrfs_buffered_read_on_mirror 2 3 "$SCRATCH_MNT/foobar" 0 256K + +_scratch_unmount + +echo "step 4......check if the repair worked" +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical2 512" $devpath2 |\ + _filter_xfs_io_offset +$XFS_IO_PROG -d -c "pread -v -b 512 $physical3 512" $devpath3 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/266.out new file +109
-0@@ -0,0 +1,109 @@ +QA output created by 266 +step 1......mkfs.btrfs +wrote 262144/262144 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt file extent +step 3......repair the bad copy +step 4......check if the repair worked +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)