Skip to contentSkip to conversation

ARM: bcmbca: add VFP and NEON fixup for bcm6846 SoC

PATCH In review William Zhang 3 participants 3 messages May 25, 2022 – Jun 15, 2022

Subsystems (4)
lore
Share & tools
lore

William Zhang

author maintainer
#0 lore raw

PATCH 1/1 ARM: bcmbca: add VFP and NEON fixup for bcm6846 SoC

BCM6846 SoC only has VFP and NEON support on core 0. So kernel VPF/NEON support is disabled in this chip. Add this fixup to manually turn on VFP/NEON in case userspace app need to access them on core 0.

---

 arch/arm/mach-bcm/Makefile |  5 ++++
 arch/arm/mach-bcm/bcmbca.c | 54 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)
 create mode 100644 arch/arm/mach-bcm/bcmbca.c
arch/arm/mach-bcm/Makefile +5 -0
index b2394ddb0558..137b24b52139 100644
@@ -68,3 +68,8 @@ CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
 obj-y				+= brcmstb.o
 obj-$(CONFIG_SMP)		+= platsmp-brcmstb.o
 endif
+
+# BCMBCA
+ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-y				+= bcmbca.o
+endif
arch/arm/mach-bcm/bcmbca.c new file +54 -0

54 lines not on this page · raw message

Signature · 1 line
2.17.1
#1 lore raw
Quoted 5 lines · William Zhang

BCM6846 SoC only has VFP and NEON support on core 0. So kernel VPF/NEON support is disabled in this chip. Add this fixup to manually turn on VFP/NEON in case userspace app need to access them on core 0.

We have had this conversation internally already, but I do not think this is sufficient in order to have a workable solution, you indicated that there is all sorts of user-space involvement in your SDK to ensure that only VFP tasks are scheduled on core 0, but if we were to seek a proper solution we would have to modify the ARM Linux kernel to forcibly migrate VFP tasks onto a core that can support executing them, or accept emulating them with the implied slow down.

Russell, what are your thoughts on this?

Quoted 81 lines

---

  arch/arm/mach-bcm/Makefile |  5 ++++
  arch/arm/mach-bcm/bcmbca.c | 54 ++++++++++++++++++++++++++++++++++++++
  2 files changed, 59 insertions(+)

create mode 100644 arch/arm/mach-bcm/bcmbca.c

arch/arm/mach-bcm/Makefile +5 -0
index b2394ddb0558..137b24b52139 100644
@@ -68,3 +68,8 @@ CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
  obj-y				+= brcmstb.o
  obj-$(CONFIG_SMP)		+= platsmp-brcmstb.o
  endif
+
+# BCMBCA
+ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-y				+= bcmbca.o
+endif
arch/arm/mach-bcm/bcmbca.c new file +54 -0
new file mode 100644
index 000000000000..6fcdfe0b94c1
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Broadcom Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/smp.h>
+#include <asm/mach/arch.h>
+#include <asm/vfp.h>
+#include <asm/cp15.h>
+
+#include "../vfp/vfpinstr.h"
+
+/*
+ * In some low end BCA chips, only core 0 has VPF/NEON support. Kernel VPF
+ * NEON are disabled on these platforms. Add this fixup to enable VFP/NEON
+ * on core 0 manually in case some user app need to access vfp/neon on core 0
+ */
+static void __init neon_enable(void *data)
+{
+	u32 access, fpexc;
+	(void)data;
+
+	/* Enable full access to VFP (cp10 and cp11) */
+	access = get_copro_access();
+	set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
+
+	/* enable NEON and VFP extension */
+	fpexc = fmrx(FPEXC);
+	fmxr(FPEXC, fpexc | FPEXC_EN);
+}
+
+static void __init bcmbca_neon_fixup(void)
+{
+	smp_call_function_single(0, neon_enable, NULL, 1);
+}
+
+static const char *const bcmbca_match[] __initconst = {
+	"brcm,bcm6846",
+	NULL
+};
+
+DT_MACHINE_START(BCMBCA, "Broadcom BCMBCA SoC")
+	.dt_compat		= bcmbca_match,
+	.init_late		= bcmbca_neon_fixup,
+MACHINE_END
Signature · 1 line
Florian
#2 lore raw
Quoted 15 lines · Florian Fainelli
Quoted 5 lines · William Zhang

BCM6846 SoC only has VFP and NEON support on core 0. So kernel VPF/NEON support is disabled in this chip. Add this fixup to manually turn on VFP/NEON in case userspace app need to access them on core 0.

We have had this conversation internally already, but I do not think this is sufficient in order to have a workable solution, you indicated that there is all sorts of user-space involvement in your SDK to ensure that only VFP tasks are scheduled on core 0, but if we were to seek a proper solution we would have to modify the ARM Linux kernel to forcibly migrate VFP tasks onto a core that can support executing them, or accept emulating them with the implied slow down.

Quoted 1 line

Russell, what are your thoughts on this?

The patch only enables access to the VFP, which adds the additional instructions on that core. However, if the kernel has decided that VFP isn't available, then we won't be advertising VFP via the HWCAPS and therefore libraries won't be using it.

However, there may be some userspace that "probes" for VFP instruction presence by trying to execute a VFP instruction, and catching the SIGILL. The problem here is if we enable it on core 0 and such an app is used, then it will think VFP is generally available when it isn't.

So, in terms of system stability, I don't think this is something we want to generally do.

Also, without the VFP kernel support code, VFP registers won't be saved and restored across context switches (which makes them a nice path for covert communication) and neither will they be saved and restored properly for signal handlers - so any use of VFP on that core would need to be carefully thought through.

It doesn't sound like a particularly good idea for a generic kernel to me, even one running on the specific hardware. For example, a debian hardfp userspace may well run on core 0 but not properly.

Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!