configs: imx8mm-cl-iot-gate: enable extension command
cover configs: imx8mm-cl-iot-gate: enable extension command
For imx8mm-cl-iot-gate we can use extension command to scan extension boards attached on the mainboard. We enable the extension command by default for users to detect the extension boards.
Ying-Chun Liu (PaulLiu) (1):
configs: imx8mm-cl-iot-gate: enable extension command
configs/imx8mm-cl-iot-gate-optee_defconfig | 2 ++ configs/imx8mm-cl-iot-gate_defconfig | 2 ++ 2 files changed, 4 insertions(+)
Signature · 1 line
2.35.1
PATCH 1/1 configs: imx8mm-cl-iot-gate: enable extension command
For imx8mm-cl-iot-gate we can use extension command to scan extension boards attached on the mainboard. We enable the extension command by default for users to detect the extension boards.
--- configs/imx8mm-cl-iot-gate-optee_defconfig | 2 ++ configs/imx8mm-cl-iot-gate_defconfig | 2 ++ 2 files changed, 4 insertions(+)
configs/imx8mm-cl-iot-gate-optee_defconfig +2 -0
@@ -31,6 +31,7 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_EXTENSION=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y CONFIG_CMD_SHA1SUM=y
@@ -79,6 +80,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x5000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_MXC_GPIO=y +CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_DM_KEYBOARD=y CONFIG_MISC=y
configs/imx8mm-cl-iot-gate_defconfig +2 -0
@@ -33,6 +33,7 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_EXTENSION=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y CONFIG_CMD_SHA1SUM=y
@@ -82,6 +83,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x5000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_MXC_GPIO=y +CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_DM_KEYBOARD=y CONFIG_MISC=y
Signature · 1 line
2.35.1
PATCH 1/1 configs: imx8mm-cl-iot-gate: enable extension command
Quoted 8 lines
For imx8mm-cl-iot-gate we can use extension command to scan extension boards attached on the mainboard. We enable the extension command by default for users to detect the extension boards.
Signed-off-by Ying-Chun Liu (PaulLiu) <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Cc NXP i.MX U-Boot Team <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================