Skip to contentSkip to conversation

regulator: Add max597x support

PATCH New Naresh Solanki 1 participant 1 message May 29, 2022

lore
Share & tools
lore
#0 lore raw

cover regulator: Add max597x support

The MAX597x is a smart switch with fault protection and sensor readings.

The MAX597X provides two programmable levels of overcurrent circuit-breaker
protection: a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off.

The MAX597x monitors voltages and current for fault protection. Allow to read the measured values using the IIO framework.

MAX5978 has single channel & MAX5970 has dual channel. Every channel has it's own regulator supply nammed 'vss1-supply' and 'vss2-supply'. The regulator supply is used to determine the output voltage, as the smart switch provides no output regulation. The driver requires the 'shunt-resistor-micro-ohms' to be present in the devicetree to properly calculate current related values.

Marcello Sylvester Bauer (1):
dt-bindings: regulator: Add bindings for MAX5970 and MAX5978

Patrick Rudolph (2):
regulator: max597x: Add support for MAX5970 and MAX5978
regulator: max597x: Add IIO support

 .../bindings/regulator/max5970.yaml           | 144 +++++
 MAINTAINERS                                   |   7 +
 drivers/regulator/Kconfig                     |  18 +
 drivers/regulator/Makefile                    |   2 +
 drivers/regulator/max597x.c                   | 575 ++++++++++++++++++
 drivers/regulator/max597x.h                   | 116 ++++
 drivers/regulator/max597x_iio.c               | 139 +++++
 7 files changed, 1001 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/max5970.yaml
 create mode 100644 drivers/regulator/max597x.c
 create mode 100644 drivers/regulator/max597x.h
 create mode 100644 drivers/regulator/max597x_iio.c

base-commit: 664a393a2663a0f62fc1b18157ccae33dcdbb8c8

Signature · 1 line
2.35.3